Guar Gum,Xanthan Gum,and HPMC Can Define Release Mechanisms and Sustain Release of Propranolol Hydrochloride

The objectives were to characterize propranolol hydrochloride-loaded matrix tablets using guar gum, xanthan gum, and hydroxypropylmethylcellulose (HPMC) as rate-retarding polymers. Tablets were prepared by wet granulation using these polymers alone and in combination, and physical properties of the granules and tablets were studied. Drug release was evaluated in simulated gastric and intestinal media. Rugged tablets with appropriate physical properties were obtained. Empirical and semi-empirical models were fit to release data to elucidate release mechanisms. Guar gum alone was unable to control drug release until a 1:3 drug/gum ratio, where the release pattern matched a Higuchi profile. Matrix tablets incorporating HPMC provided near zero-order release over 12 h and erosion was a contributing mechanism. Combinations of HPMC with guar or xanthan gum resulted in a Higuchi release profile, revealing the dominance of the high viscosity gel formed by HPMC. As the single rate-retarding polymer, xanthan gum retarded release over 24 h and the Higuchi model best fit the data. When mixed with guar gum, at 10% or 20% xanthan levels, xanthan gum was unable to control release. However, tablets containing 30% guar gum and 30% xanthan gum behaved as if xanthan gum was the sole rate-retarding gum and drug was released by Fickian diffusion. Release profiles from certain tablets match 12-h literature profiles and the 24-h profile of Inderal^® LA. The results confirm that guar gum, xanthan gum, and HPMC can be used for the successful preparation of sustained release oral propranolol hydrochoride tablets.     

Development and In Vivo Floating Behavior of Verapamil HCl Intragastric Floating Tablets

A novel gastro retentive controlled release drug delivery system of verapamil HCl was formulated in an effort to increase the gastric retention time of the dosage form and to control drug release. Hydroxypropylmethylcellulose (HPMC), carbopol, and xanthan gum were incorporated for gel-forming properties. Buoyancy was achieved by adding an effervescent mixture of sodium bicarbonate and anhydrous citric acid. In vitro drug release studies were performed, and drug release kinetics was evaluated using the linear regression method. The optimized intragastric floating tablet composed of 3:2 of HPMC K4M to xanthan gum exhibited 95.39% drug release in 24 h in vitro, while the buoyancy lag time was 36.2 s, and the intragastric floating tablet remained buoyant for >24 h. Zero-order and non-Fickian release transport was confirmed as the drug release mechanism from the optimized formulation (F7). X-ray studies showed that total buoyancy time was able to delay the gastric emptying of verapamil HCl intragastric floating tablet in mongrel dogs for more than 4 h. Optimized intragastric floating tablet showed no significant change in physical appearance, drug content, total buoyancy time, or in vitro dissolution pattern after storage at 40°C/75% relative humidity for 3 months.     

Formulation and In Vitro,In Vivo Evaluation of Effervescent Floating Sustained-Release Imatinib Mesylate Tablet

Introduction

Imatinib mesylate is an antineoplastic agent which has high absorption in the upper part of the gastrointestinal tract (GIT). Conventional imatinib mesylate (Gleevec) tablets produce rapid and relatively high peak blood levels and requires frequent administration to keep the plasma drug level at an effective range. This might cause side effects, reduced effectiveness and poor therapeutic management. Therefore, floating sustained-release Imatinib tablets were developed to allow the tablets to be released in the upper part of the GIT and overcome the inadequacy of conventional tablets.

Methodology

Floating sustained-release Imatinib mesylate tablets were prepared using the wet granulation method. Tablets were formulated using Hydroxypropyl Methylcellulose (HPMC K4M), with Sodium alginate (SA) and Carbomer 934P (CP) as release-retarding polymers, sodium bicarbonate (NaHCO₃) as the effervescent agent and lactose as a filler. Floating behavior, in vitro drug release, and swelling index studies were conducted. Initial and total drug release duration was compared with a commercial tablet (Gleevec) in 0.1 N HCl (pH 1.2) at 37 ± 0.5°C for 24 hours. Tablets were then evaluated for various physical parameters, including weight variation, thickness, hardness, friability, and drug content. Consequently, 6 months of physical stability studies and in vitro gastro-retentive studies were conducted.

Results and Discussion

Statistical data analysis revealed that tablets containing a composition of 14.67% w/w HPMC K4M, 10.67%, w/w Na alginate, 1.33%, w/w Carbomer 934P and 9.33%, w/w NaHCO₃ produced the most favorable formulation to develop 24-hour sustained-release tablets with optimum floating behavior and satisfactory physicochemical characteristics. Furthermore, in vitro release study revealed that the formulated SR tablet had significantly lower C_max and higher T_max compared to the conventional tablet (Gleevec). Thus, formulated SR tablets preserved persistent concentration of plasma up to 24 hours.

Conclusion

In conclusion, in order to suggest a better drug delivery system with constant favorable release, resulting in optimized absorption and less side effects, formulated CP-HPMC-SA based imatinib mesylate floating sustained-release tablets can be a promising candidate for cancer chemotherapy.     

Terminalia Gum as a Directly Compressible Excipient for Controlled Drug Delivery

The exudates from the incised trunk of Terminalia randii has been evaluated as controlled release excipient in comparison with xanthan gum and hydroxypropylmethylcellulose (HPMC) using carvedilol (water insoluble) and theophylline (water soluble) as model drugs. Matrix tablets were prepared by direct compression and the effects of polymer concentration and excipients—spray dried lactose, microcrystalline cellulose and dicalcium phosphate dihydrate on the mechanical (crushing strength (CS) friability (F) and crushing strength–friability ratio (CSFR)) and drug release properties of the matrix tablets were evaluated. The drug release data were fitted into different release kinetics equations to determine the drug release mechanism(s) from the matrix tablets. The results showed that the CS and CSFR increased with increase in polymer concentration while F decreased. The ranking of CS and CSFR was HPMC > terminalia > xanthan while the ranking was reverse for F. The ranking for t ₂₅ (i.e. time for 25% drug release) at a polymer concentration of 60% was xanthan > terminalia = HPMC. The dissolution time, t ₂₅, of theophylline matrices was significantly lower (p < 0.001) than those of carvedilol matrix tablets. Drug release from the matrices was by swelling, diffusion and erosion. The mechanical and drug release properties of the tablets were significantly (p < 0.05) dependent on the type and concentration of polymer and excipients used with the release mechanisms varying from Fickian to anomalous. Terminalia gum compared favourably with standard polymers when used in controlled release matrices and could serve as a suitable alternative to the standard polymers in drug delivery.     

<Emphasis Type="Italic">In Vitro</Emphasis> Release Kinetics and Bioavailability of Gastroretentive Cinnarizine Hydrochloride Tablet

An oral sustained release dosage form of cinnarizine HCl (CNZ) based on gastric floating matrix tablets was studied. The release of CNZ from different floating matrix formulations containing four viscosity grades of hydroxypropyl methylcellulose, sodium alginate or polyethylene oxide, and gas-forming agent (sodium bicarbonate or calcium carbonate) was studied in simulated gastric fluid (pH 1.2). CNZ release data from the matrix tablets were analyzed kinetically using Higuchi, Peppas, Weibull, and Vergnaud models. From water uptake, matrix erosion studies, and drug release data, the overall release mechanism can be explained as a result of rapid hydration of polymer on the surface of the floating tablet and formation of a gel layer surrounding the matrix that controls water penetration into its center. On the basis of in vitro release data, batch HP1 (CNZ, HPMC-K100LV, SBC, LTS, and MgS) was subjected to bioavailability studies in rabbits and was compared with CNZ suspension. It was concluded that the greater bioavailability of HP1 was due to its longer retention in the gastric environment of the test animal. Batch no. HP1 of floating tablet in rabbits demonstrated that the floating tablet CNZ could be a 24-h sustained release formulation.     

Fabrication of Triple-Layer Matrix Tablets of Venlafaxine Hydrochloride Using Xanthan Gum

The objective of present investigation was to develop venlafaxine hydrochloride-layered tablets for obtaining sustained drug release. The tablets containing venlafaxine hydrochloride 150 mg were prepared by wet granulation technique using xanthan gum in the middle layer and barrier layers. The granules and tablets were characterized. The in vitro drug dissolution study was conducted in distilled water. The tablets containing two lower strengths were also developed using the same percentage composition of the middle layer. Kinetics of drug release was studied. The optimized batches were tested for water uptake study. Radar diagrams are provided to compare the performance of formulated tablets with the reference products, Effexor XR capsules. The granules ready for compression exhibited good flow and compressibility when xanthan gum was used in the intragranular and extragranular fractions. Monolayer tablets failed to give the release pattern similar to that of the reference product. The drug release was best explained by Weibull model. A unified Weibull equation was evolved to express drug release from the formulated tablets. Lactose facilitated drug release from barrier layers. Substantial water uptake and gelling of xanthan gum appears to be responsible for sustained drug release. The present study underlines the importance of formulation factors in achieving same drug release pattern from three strengths of venlafaxine hydrochloride tablets.     

Use of hydrophilic natural gums in formulation of sustained-release matrix tablets of tramadol hydrochloride

The objective of this work was to develop matrix sustained-release tablets of highly water-soluble tramadol HCl using natural gums (xanthan [X gum] and guar [G gum]) as cost-effective, nontoxic, easily available, and suitable hydrophilic matrix systems compared with the extensively investigated hydrophilic matrices (ie, hydroxypropyl methylcellulose [HPMC]/carboxymethyl cellulose [CMC] with respect to in vitro drug release rate) and hydration rate of the polymers. Matrix tablets of tramadol (dose 100 mg) were produced by direct compression method. Different ratios, of 100∶0, 80∶20, 60∶40, 20∶80, 0∶100 of G gum (or X):HPMC, X gum:G gum, and triple mixture of these polymers (G gum, X gum, HPMC) were applied. After evaluation of physical characteristics of tablets, the dissolution test was, performed in the phosphate buffer media (pH 7.4) up to 8 hours. Tablets with only X had the highest mean dissolution time (MDT), the least dissolution efficiency (DE₈%), and released the drug following a zero-order model via swelling, diffusion, and erosion mechanisms. Guar gum alone could not efficiently control the drug release, while X and all combinations of natural gums with HPMC could retard tramadol HCl release. However, according to the similarity factor (f ₂), pure HPMC and H₈G₂ were the most similar formulations to Topalgic-LP as the reference standard. Published: March 17, 2006     

Gastroretentive Matrix Tablets of Boswellia Oleogum Resin: Preparation,Optimization, <Emphasis Type="Italic">In Vitro</Emphasis> Evaluation,and Cytoprotective Effect on Indomethacin-Induced Gastric Ulcer in Rabbits

Currently available anti-ulcer drugs suffer from serious side effects which limited their uses and prompted the need to search for a safe and efficient new anti-ulcer agent. Boswellia gum resin (BR) emerged as a safe, efficient, natural, and economic potential cytoprotective agent. Thus, it is of medical importance to develop gastroretentive (GR) formulations of BR to enhance its bioavailability and anti-ulcer efficacy. Early attempts involved the use of organic solvents and non-applicability to large-scale production. In this study, different tablet formulations were prepared by simple direct compression combining floating and bioadhesion mechanisms employing hydroxypropyl methylcellulose (HPMC), sodium carboxymethyl cellulose (SCMC), pectin (PC), and/or carbopol (CP) as bioadhesive polymers and sodium bicarbonate (SB) as a gas former. The prepared tablets were subjected for assessment of swelling, floating, bioadhesion, and drug release in 0.1 N HCl. The optimized GR formulation was examined for its protective effect on the gastric ulcer induced by indomethacin in albino rabbits compared with lactose tablets. The obtained results disclosed that swelling, floating, bioadhesion, and drug release of the GR tablets of BR depend mainly on the nature of the matrix and the ratio of polymer combinations. Moreover, a combination of SCMC-CP in a ratio of 2:1 (SCP21) exhibited desirable floating, bioadhesion, swelling, and extended drug release. Also, a 6-h pretreatment with SCP21 tablets decreased the severity of inflammation and number of bleeding spots among ulcer-induced rabbits in comparison to those treated with lactose tablets.     

Evaluation of alginate compressed matrices as prolonged drug delivery systems

This research investigated the use of sodium alginate for the preparation of hydrophylic matrix tablets intended for prolonged drug release using ketoprofen as a model drug. The matrix tablets were prepared by direct compression using sodium alginate, calcium gluconate, and hydroxypropylmethylcellulose (HPMC) in different combinations and ratios. In vitro release tests and erosion studies of the matrix tablets were carried out in USP phosphate buffer (pH 7.4). Matrices consisting of sodium alginate alone or in combination with 10% and 20% of HPMC give a prolonged drug release at a fairly constant rate. Incorporation of different ratios of calcium gluconate leads to an enhancement of the release rate from the matrices and to the loss of the constant release rate of the drug. Only the matrices containing the highest quantity of HPMC (20%) maintained their capacity to release ketoprofen for a prolonged time.     

Characterization and In Vitro Drug Release Studies of a Natural Polysaccharide Terminalia catappa Gum (Badam Gum)

The main objective of the present study is the physicochemical characterization of naturally available Terminalia catappa gum (Badam gum [BG]) as a novel pharmaceutical excipient and its suitability in the development of gastroretentive floating drug delivery systems (GRFDDS) to retard the drug for 12 h when the dosage form is exposed to gastrointestinal fluids in the gastric environment. As BG was being explored for the first time for its pharmaceutical application, physicochemical, microbiological, rheological, and stability studies were carried out on this gum. In the present investigation, the physicochemical properties, such as micromeritic, rheological, melting point, moisture content, pH, swelling index, water absorption, and volatile acidity, were evaluated. The gum was characterized by scanning electron microscopy, differential scanning calorimetry (DSC), powder X-ray diffraction studies (PXRD), and Fourier transform infrared spectroscopy (FTIR). Gastroretentive floating tablets of BG were prepared with the model drug propranolol HCl by direct compression methods. The prepared tablets were evaluated for all their physicochemical properties, in vitro buoyancy, in vitro drug release, and rate order kinetics. PBG 04 was selected as an optimized formulation based on its 12-h drug release and good buoyancy characteristics. The optimized formulation was characterized with FTIR, DSC, and PXRD studies, and no interaction between the drug and BG was found. Thus, the study confirmed that BG might be used in the gastroretentive drug delivery system as a release-retarding polymer.KEY WORDS: badam gum, floating, gastroretentive, propranolol HCl, Terminalia catappa     

Formulation and Evaluation of Swellable and Floating Gastroretentive Ciprofloxacin Hydrochloride Tablets

Drugs that have narrow absorption window in the gastrointestinal tract (GIT) will have poor absorption. For these drugs, gastroretentive drug delivery systems offer the advantage in prolonging the gastric emptying time. Swellable, floating, and sustained release tablets are developed by using a combination of hydrophilic polymer (hydroxypropyl methylcellulose), swelling agents (crospovidone, sodium starch glycolate, and croscarmelose sodium) and effervescent substance (sodium bicarbonate). Formulations are evaluated for percentage swelling, in vitro drug release, floating lag time, total duration of floating, and mean residence time (MRT) in the stomach. The drug release of optimized formulation follows the Higuchi kinetic model, and the mechanism is found to be non-Fickian/anomalous according to Krosmeyer–Peppas (n value is 0.68). The similarity factor (f ₂) is found to be 26.17 for the optimized formulation, which the release is not similar to that of marketed produced (CIFRAN OD®). In vivo nature of the tablet at different time intervals is observed in the radiographic pictures of the healthy volunteers and MRT in the stomach is found to be 320?±?48.99 min (n?=?6). A combination of HPMC K100M, crospovidone, and sodium carbonate shows the good swelling, drug release, and floating characters than the CIFRAN OD®.     

Development and in vitro evaluation of an oral floating matrix tablet formulation of diltiazem hydrochloride

The purpose of this research was to prepare a floating drug delivery system of diltiazem hydrochloride (DTZ). Floating matrix tablets of DTZ were developed to prolong gastric residence time and increase its bioavailability. Rapid gastrointestinal transit could result in incomplete drug release from the drug delivery system above the absorption zone leading to diminished efficacy of the administered dose. The tablets were prepared by direct compression technique, using polymers such as hydroxypropylmethylcellulose (HPMC, Methocel K100M CR), Compritol 888 ATO, alone or in combination and other standard excipients. Sodium bicarbonate was incorporated as a gas-generating agent. The effects of sodium bicarbonate and succinic acid on drug release profile and floating properties were investigated. A 3² factorial design was applied to systematically optimize the drug release profile. The amounts of Methocel K100M CR (X₁) and Compritol 888 ATO (X₂) were selected as independent variables. The time required for 50% (t₅₀) and 85% (t₈₅) drug dissolution were selected as dependent variables. The results of factorial design indicated that a high level of both Methocel K100M CR (X₁) and Compritol 888 ATO (X₂) favors the preparation of floating controlled release of DTZ tablets. Comparable release profiles between the commercial product and the designed system were obtained. The linear regression analysis and model fitting showed that all these formulations followed Korsmeyer and Peppas model, which had a higher value of correlation coefficient (r). While tablet hardness had little or no effect on the release kinetics and was found to be a determining factor with regards to the buoyancy of the tablets. Published: September 7, 2007     

Floating Tablet of Trimetazidine Dihydrochloride: An Approach for Extended Release with Zero-Order Kinetics

Trimetazidine dihydrochloride is an effective anti-anginal agent; however, it is freely soluble in water and suffers from a relatively short half-life. To solve this encumbrance, it is a prospective candidate for fabricating trimetazidine extended-release formulations. Trimetazidine extended-release floating tablets were prepared using different hydrophilic matrix forming polymers including HPMC 4000 cps, carbopol 971P, polycarbophil, and guar gum. The tablets were fabricated by dry coating technique. In vitro evaluation of the prepared tablets was performed by the determination of the hardness, friability, content uniformity, and weight variation. The floating lag time and floating duration were also evaluated. Release profile of the prepared tablets was performed and analyzed. Furthermore, a stability study of the floating tablets was carried out at three different temperatures over 12 weeks. Finally, in vivo bioavailability study was done on human volunteers. All tablet formulas achieved <0.5 min of floating lag time, more than 12 h of floating duration, and extended t _1/2. The drug release in all formulas followed zero-order kinetics. T4 and T8 tablets contained the least polymer concentration and complied with the dissolution requirements for controlled-release dosage forms. These two formulas were selected for further stability studies. T8 exhibited longer expiration date and was chosen for in vivo studies. T8 floating tablets showed an improvement in the drug bioavailability compared to immediate-release tablets (Vastrel® 20 mg).     

Release Behaviour of Propranolol HCl from Hydrophilic Matrix Tablets Containing Psyllium Powder in Combination with Hydrophilic Polymers

The objective of this study was to investigate the release behaviour of propranolol hydrochloride from psyllium matrices in the presence hydrophilic polymers. The dissolution test was carried out at pH 1.2 and pH 6.8. Binary mixtures of psyllium and hydroxypropyl methylcellulose (HPMC) used showed that an increase in the percentage of HPMC in the binary mixtures caused a significant decrease in the release rate of propranolol. Psyllium–alginate matrices produced lower drug release as compared to when the alginate was the matrix former alone. When sodium carboxy methyl cellulose (NaCMC) was incorporated into the psyllium, the results showed that matrices containing the ratio of psyllium–NaCMC in the 1:1 ratio are able to slow down the drug release significantly as compared to matrices made from only psyllium or NaCMC as retardant agent suggesting that there could be a synergistic effect between psyllium and NaCMC. The double-layered tablets showed that the psyllium and HPMC in the outer shell of an inner formulation of psyllium alone had the greatest effect of protecting the inner core and thus producing the lowest drug release (DE = 38%, MDT = 93 min). A significant decrease in the value of n in Q = kt ⁿ from 0.70 to 0.51 as the psyllium content was increased from 50 to 150 mg suggests that the presence of psyllium in HPMC matrices affected the release mechanism. Psyllium powder had the ability in the combination with other hydrophilic polymers to produce controlled release profiles. Care and consideration should as such be taken when formulating hydrophilic matrices in different combinations.     

Colon Specific Delivery of Indomethacin: Effect of Incorporating pH Sensitive Polymers in Xanthan Gum Matrix Bases

In the present study, an attempt has been made to design controlled release colon-specific formulations of indomethacin by employing pH responsive polymers Eudragit (L100 or S100) in matrix bases comprised of xanthan gum. The prepared tablets were found to be of acceptable quality with low-weight variation and uniform drug content. In vitro release studies indicated rapid swelling and release of significant percentage of drug in the initial period from matrix tablets composed of xanthan gum alone. Addition of pH responsive polymers Eudragit (L100 or S100) to xanthan gum matrix resulted in negligible to very low drug release in the initial period in acidic to weakly acidic medium. Furthermore, with increase in pH of the dissolution medium due to dissolution of Eudragit L100/Eudragit S100 that resulted in the formation of a porous matrix, faster but controlled drug release pattern was observed. Thus, a sigmoidal release pattern was observed from the designed formulations suitable for colonic delivery. Drug release mechanism in all cases was found to be of super case II type, indicating erosion to be the primary cause of drug release. Since the drug release from almost all the matrix bases in the initial phase was negligibly low and followed with controlled release for about 14–16 h, it was concluded that a matrix design of this composition could have potential applications as a colon-specific drug delivery device with additional advantage of easy scale-up and avoidance of all-or-none phenomenon associated with coated colon-specific systems.     

Fabrication of Modified Release Tablet Formulation of Metoprolol Succinate using Hydroxypropyl Methylcellulose and Xanthan Gum

The present investigation was undertaken to fabricate modified release tablet of metoprolol succinate using hydroxypropyl methylcellulose (HPMC) and xanthan gum as a matrixing agent. A 3² full factorial design was employed for the optimization of formulation. The percentage drug released at a given time (Y ₆₀, Y ₂₄₀ and Y ₇₂₀) and the time required for a given percentage of drug to be released (t _50%) were selected as dependent variables. The in vitro drug dissolution study was carried out in pH 6.8 phosphate buffer employing paddle rotated at 50 rpm. The similarity factor (f ₂) was calculated for selection of best batch considering mean in vitro dissolution data of Seloken® XL as a reference profile. It is concluded that the desired drug release pattern can be obtained by using a proper combination of HPMC (high gelling ability) and xanthan gum (quick gelling tendency). The economy of xanthan gum and faster hydration rate favors its use in modified release tablets. The matrix integrity during dissolution testing was maintained by using hydroxypropyl methylcellulose.     

The anomaly of oxygen diffusion in aqueous xanthan solutions

A membrane-covered polarographic oxygen electrode was used to measure oxygen diffusion coefficients in aqueous polyelectrolyte solutions of xanthan gum, sodium alginate, and sodium carboxymethylcellulose (CMC). In sodium alginate solutions, dilute xanthan solutions, and solutions containing more than 0.3 wt % CMC, oxygen diffusion coefficients decrease with increasing polymer concentrations. Interestingly, in dilute CMC solutions and concentrate xanthan solutions containing more than 0.5 wt % xanthan gum, oxygen diffusion coefficients increase with increasing polymer concentrations, and values exceeding that in pure water are generally observed.     

Xanthan-g-poly(acrylamide): Microwave-assisted synthesis,characterization and in vitro release behavior

Xanthan-g-poly(acrylamide) was synthesized employing microwave-assisted and ceric-induced graft copolymerization, and was characterized by FT-IR, DSC, XRD and SEM studies. Matrix tablets of diclofenac sodium were formulated using graft copolymer as the matrix by direct compression technique. Release behavior of the graft copolymer was evaluated using USP type-II dissolution apparatus in 900 ml of phosphate buffer (pH 6.8), maintained at 37 °C and at 50 rpm. Microwave-assisted grafting provided graft copolymer with higher % grafting in a shorter time in comparison to the ceric-induced grafting. The % grafting was found to increase with the increase in the power of microwave and/or time of exposure. The matrix tablets were found to release the drug by zero-order kinetics, and the faster release of drug was observed from the graft copolymer matrix as compared to the xanthan gum matrix. It was observed that grafting reduces the swelling, but increases the erosion of xanthan gum.     

Development and Evaluation of Buccal Bioadhesive Tablet of an Anti-emetic Agent Ondansetron

The aim of the present study was to develop and evaluate a buccal adhesive tablet containing ondansetron hydrochloride (OH). Special punches and dies were fabricated and used while preparing buccal adhesive tablets. The tablets were prepared using carbopol (CP 934), sodium alginate, sodium carboxymethylcellulose low viscosity (SCMC LV), and hydroxypropylmethylcellulose (HPMC 15cps) as mucoadhsive polymers to impart mucoadhesion and ethyl cellulose to act as an impermeable backing layer. The formulations were prepared by direct compression and characterized by different parameters such as weight uniformity, content uniformity, thickness, hardness, swelling index, in vitro drug release studies, mucoadhesive strength, and ex vivo permeation study. As compared with the optimized formulation composed of OH—5 mg, CP 934—30 mg, SCMC LV—165 mg, PEG 6000—40 mg, lactose—5 mg, magnesium stearate—1.5 mg, and aspartame—2 mg, which gave the maximum release (88.15%), non-bitter (OH) that form namely ondansetron base and complexed ondansetron was used in order to make the selected formulation acceptable to human. The result of the in vitro release studies and permeation studies through bovine buccal mucosa revealed that complexed ondansetron gave the maximum release and permeation. The stability of drug in the optimized adhesive tablet was tested for 6 h in natural human saliva; both the drug and device were found to be stable in natural human saliva. Thus, buccal adhesive tablet of ondansetron could be an alternative route to bypass the hepatic first-pass metabolism and to improve the bioavailability of (OH).     

Design of innovated lipid-based floating beads loaded with an antispasmodic drug: in-vitro and in-vivo evaluation

Context: Drotaverine hydrochloride (DRT) is used to treat gastrointestinal spasms accompanied with diarrhoea. Hence, the drug suffers from brief residence in the highly moving intestine during diarrhoea which leads to poor bioavailability and frequent dosing.

Objective: This study aimed to extend DRT residence in the stomach.

Methods: Calcium alginate floating beads were prepared using sodium alginate, isopropylmyristate (oil), and Gelucire® 43/01 (lipid) adopting emulsion gelation technique. The beads were evaluated for their floating ability, DRT entrapment efficiency and in-vitro release. Gelucire® 43/01 /oil-based beads of the selected formula were coated using ethylcellulose and different plasticizers as polyethylene glycol 400 and triethyl citrate to retard the drug release. The coated beads were re-characterized. Finally, the best formulae were investigated for their in-vivo floating ability in dogs besides their delivery to the systemic circulation compared to drug powder in human volunteers.

Results: Incorporation of Gelucire® 43/01 to oil-based beads enhanced the in-vitro performance of the beads. Coated beads prepared using drug:sodium alginate ratio of 1:3 (w/w), 20% (w/v) isopropylmyristate, 20% (w/v) Gelucire® 43/01 showed promising in-vitro performance. The beads floated for 12?h in the dogs’ stomach and produced three-fold increase of the total amount of DRT absorbed within 24?h compared to that of DRT powder.

Conclusions: Gelucire® 43/01 /isopropylmyristate-based calcium alginate floating beads coated with ethylcellulose using either PEG 400 or TEC as plasticizers proved to be a successful dosage form in extending DRT release.