Improvement of nisin production in pH feed-back controlled,fed-batch culture by <Emphasis Type="Italic">Lactococcus lactis</Emphasis>subsp<Emphasis Type="Italic">. lactis</Emphasis>

Nisin production by Lactococcus lactis subsp. lactisin fed-batch culture was doubled by using a pH feed-back controlled method. Sucrose concentration was controlled at 10 g l^–1 giving 5010 IU nisin ml^–1 compared to 2660 IU nisin ml^–1 in batch culture.     

Modelling the production of nisin by Lactococcus lactis in fed-batch culture

Nisin production in batch culture and fed-batch cultures (sucrose feeding rates were 6, 7, 8, and 10 g l^–1 h^–1, respectively) by Lactococcus lactis subsp. lactis ATCC 11454 was investigated. Nisin production showed primary metabolite kinetics, and could be improved apparently by altering the feeding strategy. The nisin titer reached its maximum, 4,185 IU ml^–1, by constant addition of sucrose at a feeding rate of 7 g l^–1 h^–1; an increase in 58% over that of the batch culture (2,658 IU ml^–1). Nisin biosynthesis was affected strongly by the residual sucrose concentration during the feeding. Finally, a mathematical model was developed to simulate the cell growth, sucrose consumption, lactic acid production and nisin production. The model was able to describe the fermentation process in all cases.     

Production of nisin with continuous adsorption to Amberlite XAD-4 resin using<Emphasis Type="Italic"> Lactococcus lactis</Emphasis> N8 and<Emphasis Type="Italic"> L. lactis</Emphasis> LAC48

The production of nisin, biomass and lactic acid in pH-controlled and uncontrolled batch fermentation and batch fermentation (pH 5.5) with continuous removal of nisin was examined in the parent strain Lactococcus lactis N8 and LAC48. Strain LAC48 in batch fermentor (pH not controlled) gave a maximum nisin concentration of 2.5×10⁶ IU g dcw^–1. The nisin concentration remained high (2.0×10⁶ IU g dcw^–1) after the logarithmic growth phase (10–22 h), whereas nisin production of strain N8 decreased after the logarithmic growth phase. The maximum nisin production of strain LAC48 was not directly related to the biomass formation and not associated with growth. In order to study end product inhibition in nisin production, a system was built for adsorption of nisin during fermentation. The adsorbent Amberlite XAD-4 was found to have an effective binding capacity for nisin. Cells of LAC48 and N8 compensated for the removal of nisin, indicating that nisin production also occurs in the stationary phase.     

Model aided design of repeated fed-batch penicillin fermentation

Structured models of antibiotic fermentation that quantify maturation and aging of product forming biomass are fitted to experimental data. Conditions of superiority of repeated fed batch cultivation are characterized on the basis of a performance criterion that includes penicillin productivity and costs of operation. Emphasis is placed on the relevance of such research to the model aided design of optimal cyclic operation.List of Symbols c IU/mg cost factor - D s^–1 dilution rate - J IU · cm^–3 · h^–1 net productivity - k _p IU · mg^–11 · h^–1 specific product formation rate - k _pm IU · mg^–1 · h^–1 maximum specific product formation rate - p IU/cm³ concentration of penicillin - T s final time of fermentation - t s fermentation time - X kg/m³ concentration of biomass dry weight - X ₁kg/m³ concentration of young, immature biomass - X ₂ kg/m³ concentration of mature product forming biomass - X _c kg/m³ biomass concentration of the end of growth phase - X _mkg/m³ maximum biomass concentration Greek Letters s^–1 specific maturation rate - s^–1 specific aging rate - s^–1 specific growth rate - _m s^–1 maximum specific growth rate - _p s^–1 specific growth rate during the product formation phase - s cycle time - % volume fraction of draw-off Abbreviations CC chemostat culture - RFBC repeated fed batch culture - RBC repeated batch culture     

Cellulase production by Trichoderma reesei (RUT-C30) in fed-batch culture

Summary Fed-batch cultures of Trichoderma reesei RUT-C30 attained quasi-steady state conditions, in respect of biomass concentration and enzyme production rate, commensurate with a specific cell maintenance coefficient of 0.029 g cellulose.g biomass.^–1h^–1 and specific cellulase production rate of between 9.6 and 11.9 IU (filter paper activity).g biomass.^–1h^–1. A maximum enzyme yield of 57 IU.m1^–1 at an overall productivity of 201 IU.L.^–1h^–1 resulted from a cellulose feed rate of 1.0g.L.^–1h^–1.     

Thermostable cellulases from <Emphasis Type="Italic">Streptomyces</Emphasis>sp.: scale-up production in a 50-l fermenter

Thermostable cellulase was produced by Streptomyces sp. T3-1 grown in a 50-l fermenter. Maximum cellulase activity was attained on the fourth day when agitation speeds and aeration rates were controlled at 300 rpm and 0.75 vvm, respectively. Maximum enzyme activities were: 148 IU CMCase ml^–1, 45 IU Avicelase ml^–1, and 137 IU -glucosidase ml^–1 with productivity of 326 IU l^–1 h^–1, which were 10--32% higher than the values obtained in shake-flask culturesRevisions requested 12 October 2004/1 November 2004; Received received 1 November 2004/14 December 2004     

The production of 2,3-butanediol by fermentation of high test molasses

Summary Klebsiella oxytoca fermented 199 g·l^–1 high test or invert molasses using batch fermentation with substrate shift to produce 95.2–98.6 g 2,3-butanediol·l^–1 and 2,4–4.3 g acetoin·l^–1 with a diol yield of 96–100% of the theoretical value and a diol productivity of 1.0–1.1 g·l^–1·h^–1. Fermentation was performed numerous times with molasses in repeated batch culture with cell recovery. Such repeated batch fermentation, in addition to a high product yield, also showed a very high product concentration. For example, 118 g 2,3-butanediol·l^–1 and 2.3 g acetoin·l^–1 were produced from 280 g·l^–1 of high test molasses. The diol productivity in this fermentation amounted to 2.4 g·l^–1·h^–1 and can undoubtedly be further increased by increasing the cell concentration. Because the Klebsiella cultures ferment 2,3-butanediol at an extremely high rate once the sugar has been consumed, the culture was inhibited completely by the addition of 15 g ethanol·l^–1 and switching off aeration. Offprint requests to: A. S. Afschar     

Control of xylanase production without protease activity in Bacillus sp. by selection of nitrogen source

Maximum xylanase activity, of 380 IU ml^–1, with negligible protease activity, occurred when Bacillus SSP-34 was grown for 96 h with yeast extract and peptone each at 0.25%. Other concentrations of the combination gave xylanase activities less than 66% of that with the optimum nitrogen source concentration and protease activities in the range of 0.01–0.045 IU ml^–1.     

Optimization of culture conditions for the production of an extracellular ribonuclease by <Emphasis Type="Italic">Aspergillus niger</Emphasis> in a benchtop bioreactor

SummarySelf-directing optimization was successfully employed to determine the optimal combination of engineering parameters, viz., pH, aeration rate and agitation rate, for extracellular ribonuclease production by Aspergillus niger SA-13-20 in a batch bioreactor. Maximal RNase production of 5.38 IU ml^–1 was obtained at controlled pH of 2.33, aeration rate of 1.67 v/v/m and agitation rate of 850 rev/min. The effect of oxygen on the fermentation was also investigated. With increase in volumetric oxygen transfer coefficients (K_La), cell growth and RNase production first increased and then decreased. RNase production was further increased to 7.10 IU ml^–1 and the fermentation time was shortened from 96 to 72 h by controlling dissolved oxygen concentration at 10% saturation by aerating oxygen after about 28 h of fermentation under the above optimal condition. The kinetic model showed that RNase production by A. niger SA-13-20 was growth-associated.     

Actinorhodin production by Streptomyces coelicolor A3(2): kinetic parameters related to growth,substrate uptake and production

The dynamics of an Streptomyces coelicolor A3(2) culture in a 20-l computer-controlled batch bioreactor was investigated both experimentally and theoretically. In defined medium, depending on the initial conditions, the calculated value of some of the kinetic parameters were: maximum specific growth rate, 0.03 h^–1; death rate constant, 1.4–6.3 × 10^–3 h^–1; observed biomass yield, 0.21 g cells g^–1 glucose and the maintenance coefficient for the cells, 0.0448 g glucose g^–1 cells h^–1. According to both experimental observations and the Luedeking-Piret model, actinorhodin production was found to be growth-associated. This paper provides the first published quantitative information on the main kinetic parameters describing the activity of S. coelicolor in batch culture. Correspondence to: F. Mavituna     

A solid-state bioreactor coupled with forced aeration and pressure oscillation

A novel design of a solid-state bioreactor, operated with periodic pressure oscillation coupled with forced aeration through the medium, gave efficient control of temperature. The evaluation of the bioreactor assembly with respect to temperature and cellulase production by Penicillium decumbens JUA10 showed that, at 4 atm and the bed depth of 6 cm, the maximal temperature variation in the reactor was +1.5 °C at a set value of 30 °C compared with +6.8 °C in a static tray system. The highest cellulase and -glucosidase activities were 15 IU g^–1 and 51 IU g^–1 substrate dry matter at 96 h, respectively, while only 10 IU g^–1 and 24 IU g^–1 were obtained in the static tray culture system.     

A repeated batch process for cultivation of <Emphasis Type="Italic">Bifidobacterium longum</Emphasis>

A repeated batch process was performed to culture Bifidobacterium longum CCRC 14634. An on-line device, oxidation-reduction potential (ORP), was used to monitor cell growth and uptake of nutrients in the culture. The ORP of the culture medium decreased substantially during fermentation until nutrients were depleted. Six cycles of batch fermentation using ORP as a control parameter were successfully carried out. As soon as ORP remained constant or increased, three-quarters of the broth was removed, and the same volume of fresh medium was fed to the fermenter for a new cycle of cultivation. Average cell concentrations of 1.9×10⁹ and 3.4×10⁹ cfu ml^–1 for repeated batch fermentation in MRS (Lactobacilli MRS broth) and WY (containing whey hydrolyzates, yeast extract, l-cysteine) medium, respectively, were achieved. Cell mass productivities for batch, fed-batch and repeated batch fermentation using MRS medium were 0.51, 0.41, and 0.64 g l^–1 h^–1, respectively, and those for batch and repeated batch using WY medium were 0.76, 0.99 g l^–1 h^–1, respectively. The results indicate a possible industrial process to culture Bifidobacteria sp.     

Production of a recombinant, immunogenic protein, P64k, of Neisseria meningitidis in Escherichia coli in fed-batch fermenters

P64k is a Neisseria meningitidis high molecular weight protein present in meningococcal vaccine preparations. The lpdA gene, codifying for this protein, was cloned in Escherichia coli and the P64k protein was expressed in Escherichia coli K12 W3110 under the control of the tryptophan promoter. The recombinant bacteria were grown in batch or fed-batch cultures. P64k was expressed as an intracellular soluble form at about 40% of the total cellular protein. A final productivity of 215 mg l^–1 h^–1 and 11 g cell dry wt l^–1 were obtained when the fed-batch culture conditions were optimised, compared to 30% of total protein, and a productivity of 76 mg l^–1 h^–1 and 5.1 g cell dry wt l^–1 in batch cultivation.     

Direct alcoholic fermentation of starchy biomass using amylolytic yeast strains in batch and immobilized cell systems

Summary Direct alcoholic fermentation of dextrin or soluble starch with selected amylolytic yeasts was studied in both batch and immobilized cell systems. In batch fermentations, Saccharomyces diastaticus was capable of fermenting high dextrin concentrations much more efficiently than Schwanniomyces castellii. From 200 g·l^–1 of dextrin S. diastaticus produced 77 g·l^–1 of ethanol (75% conversion efficiency). The conversion efficiency decreased to 59% but a higher final ethanol concentration of 120 g·l^–1 was obtained with a medium containing 400 g·l^–1 of dextrin. With a mixed culture of S. diastaticus and Schw. castellii 136 g·l^–1 of ethanol was produced from 400 g·l^–1 of dextrin (67% conversion efficiency). S. diastaticus cells attached well to polyurethane foam cubes and a S. diastaticus immobilized cell reactor produced 69 g·l^–1 of ethanol from 200 g·l^–1 of dextrin, corresponding to an ethanol productivity of 7.6g·l^–1·h^–1. The effluent from a two-stage immobilized cell reactor with S. diastaticus and Endomycopsis fibuligera contained 70 g·l^–1 and 80 g·l^–1 of ethanol using initial dextrin concentrations of 200 and 250 g·l^–1 respectively. The corresponding values for ethanol productivity were 12.7 and 9.6 g·l^–1·h^–1. The productivity of the immobilized cell systems was higher than for the batch systems, but much lower than for glucose fermentation.     

Repeated-batch production of kojic acid in a cell-retention fermenter using Aspergillus oryzae M3B9

A cell-retention fermenter was used for the pilot-scale production of kojic acid using an improved strain of Aspergillus oryzae in repeated-batch fermentations. Among the various carbon and nitrogen sources used, sucrose and yeast extract promoted pellet morphology of fungi and higher kojic acid production. Repeated-batch culture using a medium replacement ratio of 75% gave a productivity of 5.3 g L^–1 day^–1 after 11.5 days of cultivation. While batch culture in shake-flasks resulted in a productivity of 5.1 g L^–1 day^–1, a productivity of 5 g L^–1 day^–1 was obtained in a pilot-scale fermenter. By converting the batch culture into repeated batches, the non-productive downtime of cleaning, filling and sterilizing the fermenter between each batch were eliminated, thereby increasing the kojic acid productivity.     

Fed-batch fermentation for production of Kluyveromyces marxianusFII 510700 cultivated on a lactose-based medium

A strain of Kluyveromyces marxianus was grown in batch culture in lactose-based media at varying initial lactose concentrations (10–60 g L^–1) at 30°C, pH 5.0, dissolved oxygen concentrations greater than 20%. Increasing the concentration of mineral salts three-fold at 40 g L^–1 and 60 g L^–1 initial lactose concentration showed only a small increase in the yield of biomass, from 0.38 g g^–1 to 0.41 g g^–1, indicating that the initial batch cultures were not significantly nutrient- (mineral salts)-limited. A relatively high biomass concentration (105 g L^–1) was obtained in fed-batch culture following extended lactose feeding. An average specific growth rate (0.27 h^–1), biomass yield (0.38 g g^–1) and overall productivity (2.9 g L^–1 h^–1) were obtained for these fed-batch conditions. This fed-batch protocol provides a strategy for achieving relatively high concentrations and productivities of K. marxianus on other lactose-based substrate streams (e.g., whey) from the dairy industry.     

Inhibition of yeast by lactic acid bacteria in continuous culture: nutrient depletion and/or acid toxicity?

Lactic acid was added to batch very high gravity (VHG) fermentations and to continuous VHG fermentations equilibrated to steady state with Saccharomyces cerevisiae. A 53% reduction in colony-forming units (CFU) ml^–1 of S. cerevisiae was observed in continuous fermentation at an undissociated lactic acid concentration of 3.44% w/v; and greater than 99.9% reduction was evident at 5.35% w/v lactic acid. The differences in yeast cell number in these fermentations were not due to pH, since batch fermentations over a pH range of 2.5–5.0 did not lead to changes in growth rate. Similar fermentations performed in batch showed that growth inhibition with added lactic acid was nearly identical. This indicates that the apparent high resistance of S. cerevisiae to lactic acid in continuous VHG fermentations is not a function of culture mode. Although the total amount of ethanol decreased from 48.7 g l^–1 to 14.5 g l^–1 when 4.74% w/v undissociated lactic acid was added, the specific ethanol productivity increased ca. 3.2-fold (from 7.42×10^–7 g to 24.0×10^–7 g ethanol CFU^–1 h^–1), which indicated that lactic acid stress improved the ethanol production of each surviving cell. In multistage continuous fermentations, lactic acid was not responsible for the 83% (CFU ml^–1) reduction in viable S. cerevisiae yeasts when Lactobacillus paracasei was introduced to the system at a controlled pH of 6.0. The competition for trace nutrients in those fermentations and not lactic acid produced by L. paracasei likely caused the yeast inhibition.     

Glucose oxidase and catalase activities ofPenicillium variabile P16 immobilized in polyurethane sponge

Conidia ofPenicillium variabile P16 were immobilized in polyurethane sponge and used in repeated-batch processes in a fluidized-bed reactor. Optimal conditions for production of glucose oxidase and catalase were: inoculum size, 10%; glucose concentration, 80 g L^–1; Ca-carbonate concentration, 15 g L^–1; temperature, 28°C and aeration rate, 4 VV^–1 min^–1. In an extended repeated-batch process, glucose oxidase activity was highest after the fourth batch and catalase activity was highest after the fifth batch. Scanning electron microscopy showed that the fungus grew only in the interior of carrier particles.     

Further support for fed-batch production of gellulases

Summary New data for the fed-batch production of cellulases usingTrichoderma reesei Rut. C-30 give additional motivation for this mode of culture as a result of simultaneously high enzyme titres (31 IU FPA/mL), productivities (160 IU FPA L^–1 h^–1) and yields (477 IU FPA/g cellulose). These results also indicate a strong potential for even further improvements through the optimization of feeding policies.     

Influence of temperature rise on kinetic parameters during batch propagation of Kluyveromyces fragilis in cheese whey under ambient conditions

Three 5 l working volume fermenters were used to investigate the growth of the yeast Kluyveromyces fragilis in acid cheese whey under ambient temperature in order to assess the specific growth rate and yield, the lactose and oxygen uptake rates during the various phases of batch culture, the effect of increasing temperature on the various kinetic parameters, and the need for a cooling unit for single cell production batch systems. The initial dissolved oxygen in the medium was 5.5 mg l^–1 and the pH was maintained at 4.5. The observed lag phase, specific growth rate and maximum cell number were 4 h, 0.2 h^–1 and 8.4 × 10⁸ cells ml^–1, respectively. About 99% of the lactose in cheese whey was utilized within 20 h, 85% during the exponential growth phase. The specific lactose utilization rates by K. fragilis were 0.20 × 10^–12, 1.457 × 10^–12, 0.286 × 10^–12 and 0.00 g lactose cell^–1 h^–1, for the lag, exponential, stationary and death phases, respectively. The dissolved oxygen concentration in the medium decreased as the cell number increased. The lowest oxygen concentration of 1.2 mg l^–1 was observed during the stationary phase. The volumetric oxygen transfer coefficient was 0.41 h^–1 and the specific oxygen uptake rates were 0.32 × 10^–12, 2.14 × 10^–12, 0.51 × 10^–12 and 0.003 × 10^–12 mg O₂ cell^–1 h^–1, for the lag, exponential, stationary and death phases, respectively. The maximum temperature recorded for the medium was 33 °C, indicating that a cooling unit for batch production of single cell protein at ambient temperature is not needed for this type of bioreactor. The increase in medium temperature affected the cell growth and the lactose and oxygen uptake rates.