Factors that influence siderophoremediated iron bioavailability: catalysis of interligand iron (III) transfer from ferrioxamine B to EDTA by hydroxamic acids

Deferriferrioxamine B (H3DFB) is a linear trihydroxamic acid siderophore with molecular formula NH2(CH2)5[N(OH)C(O)(CH2)2C(O)NH(CH2)5]2N(OH)C(O)CH3 that forms a kinetically and thermodynamically stable complex with iron(III), ferrioxamine B. Under the conditions of our study (pH = 4.30, 25 degrees C), ferrioxamine B, Fe(HDFB)+, is hexacoordinated and the terminal amine group is protonated. Addition of simple hydroxamic acids, R1C(O)N(OH)R2 (R1 = CH3, R2 = H; R1 = C6H5, R2 = H; R1 = R2 = CH3), to an aqueous solution of ferrioxamine B at pH = 4.30, 25.0 degrees C, I = 2.0, results in the formation of ternary complexes Fe(H2DFB)A+ and Fe(H3DFB)A2+, and tris complexes FeA3, where A- represents the bidendate hydroxamate anion R1C(O)N(O)R2-. The addition of a molar excess of ethylenediaminetetraacetic acid (EDTA) to an aqueous solution of ferrioxamine B at pH 4.30 results in a slow exchange of iron(III) to eventually completely form Fe(EDTA)- and H4DFB+. The addition of a hydroxamic acid, HA, catalyzes the rate of this iron exchange reaction: (formula; see text) A four parallel path mechanism is proposed for reaction (1) in which catalysis occurs via transient formation of the ternary and tris complexes Fe(H2DFB) A+, Fe(H3DFB)A2+, and FeA3. Rate and equilibrium constants for the various reaction paths to products were obtained and the influence of hydroxamic acid structure on catalytic efficiency is discussed. The importance of a low energy pathway for iron dissociation from a siderophore complex in influencing microbial iron bio-availability is discussed. The system represented by reaction (1) is proposed as a possible model for in vivo catalyzed release of iron from its siderophore complex at the cell wall or interior, where EDTA represents the intracellular storage depot or membrane-bound carrier and HA represents a low molecular weight hydroxamate-based metabolite capable of catalyzing interligand iron exchange.     

Vibrational analysis of nucleic acids. V. Force field and conformation-dependent modes of the phosphodiester backbone modeled by diethyl phosphate.

A generalized valence force field is derived for the diethyl phosphate anion [(CH3CH2O)2PO2-] and its deuterium [(CH3CD2O)2PO2-, (CD3CH2O)2PO2- and (CD3CD2O)2PO2-] and carbon-13 [(CH3 13CH2O)2PO2-] derivatives in the stable trans-gauche-gauche-trans conformation. Normal coordinate analysis of the trans-gauche-gauche-trans conformer, which serves as a structural analog of the nucleic acid phosphodiester group, is based on comprehensive infrared and Raman spectroscopic data and vibrational assignments obtained for the diethyl phosphate anion. The generalized valence force field is in good agreement with the scaled ab initio force field of diethyl phosphate and represents significant improvement over earlier modeling of the phosphodiester moiety with dimethyl phosphate. The conformational dependence of skeletal C-C-O-P(O2-)-O-C-C stretching vibrations is also explored. Starting with the trans-gauche-gauche-trans conformation, the frequency dependence of skeletal stretching modes has been obtained by stepwise rotation of the torsion angles of the P-O and C-O bonds corresponding to nucleic acid torsions alpha (P-O5'), beta (O5'-C5'), epsilon (C3'-O3'), and zeta (O3'-P). Both symmetric and antisymmetric phosphoester stretching modes are highly sensitive to P-O and C-O torsions, whereas symmetric and antisymmetric phosphodioxy (PO2-) stretching modes are less sensitive. The present results provide an improved structural basis for understanding previously developed empirical correlations between vibrational marker bands and nucleic acid backbone conformation.     

Structural analysis of the core region of lipopolysaccharides from Proteus mirabilis serotypes O6, O48 and O57.

The structure of lipid A core region of the lipopolysaccharides (LPS) from Proteus mirabilis serotypes O6, O57 and O48 was determined using NMR, MS and chemical analysis of the oligosaccharides, obtained by mild acid hydrolysis, alkaline deacylation, and deamination of LPS: [see text for structure]. Incomplete substitutions are indicated by bold italic type. All sugars are present in pyranose form, alpha-Hep is the residue of L-glycero-alpha-D-manno-Hep, alpha-DD-Hep is the residue of D-glycero-alpha-D-manno-Hep, L-Ara4N is 4-amino-4-deoxy-L-arabinose, Qui4NAlaAla is the residue of 4-N-(L-alanyl-L-alanyl)-4-amino-4,6-dideoxyglucose. All sugars except L-Ara4N have D-configuration. beta-GalA* is partially present in the form of amide with 1,4-diaminobutane (putrescine)-HN(CH2)4NH2 or spermidine-HN(CH2)3NH(CH2)4NH2.     

Molecular orbital study of complexes of zinc(II) with sulphide, thiomethanolate, thiomethanol, dimethylthioether, thiophenolate, formiate, acetate, carbonate, hydrogen carbonate, iminomethane and imidazole. Relationships with structural and catalytic zinc in some metallo-enzymes.

Geometry optimization and energy calculations have been performed at the density functional B3LYP/LANL2DZ level on hydrogen sulfide (HS-), dihydrogensulfide (H2S), thiomethanolate (CH3S-), thiomethanol (CH3SH), thiophenolate (C6H5S-), methoxyde (CH3O-), methanol (CH3OH), formiate (HCOO-), acetate (CH3COO-), carbonate (CO3(2-)), hydrogen carbonate (HCO3-), iminomethane (NH=CH2), [ZnS], [ZnS2]2-, [Zn(HS)]+, [Zn(H2S)]2+, [Zn(HS)4]2-, [Zn(CH3S)]+, [Zn(CH3S)2], [Zn(CH3S)3]-, [Zn(CH3S)4]2-, [Zn(CH3SH)]2+, [Zn(CH3SCH3)]2+, [Zn(C6H5S)]+, [Zn(C6H5S)2], [Zn(C6H5S)3]-, [Zn(HS)(NH=CH2)2]+, [Zn(HS)2(NH=CH2)2], [Zn(HS)(H2O)]+, [Zn(HS)(HCOO)], [Zn(HS)2(HCOO)]-, [Zn(CH3O)]+, [Zn(CH3O)2], [Zn(CH3O)3]-, [Zn(CH3O)4]2, [Zn(CH3OH)]2+, [Zn(HCOO)]+, [Zn(CH3COO)]+, [Zn(CH3COO)2], [Zn(CH3COO)3]-, [Zn(CO3)], [Zn(HCO3)]+, and [Zn(HCO3)(Imz)]+ (Imz, 1,3-imidazole). The computed Zn-S bond distances are 2.174A for [ZnS], 2.274 for [Zn(HS)]+, 2.283 for [Zn(CH3S)]+, and 2.271 for [Zn(C6H5S)]+, showing that sulfide anion forms stronger bonds than substituted sulfides. The nature of the substituents on sulfur influences only slightly the Zn-S distance. The optimized tetra-coordinate [Zn(HS)2(NH=CH2)2] molecules has computed Zn-S and Zn-N bond distances of 2.392 and 2.154A which compare well with the experimental values at the solid state obtained via X-ray diffraction for a number of complex molecules. The computed Zn-O bond distances for chelating carboxylate derivatives like [Zn(HOCOO)]+ (1.998A), [Zn(HCOO)]+ (2.021), and [Zn(CH3COO)]+ (2.001) shows that the strength of the bond is not much influenced by the substituent on carboxylic carbon atom and that CH3- and HO- groups have very similar effects. The DFT analysis shows also that the carboxylate Ligand has a preference for the bidentate mode instead of the monodentate one, at least when the coordination number is small.     

Synthesis and oxidation of carboxylate-bridged diiron(II) complexes with substrates tethered to primary alkyl amine ligands

The synthesis and crystallographic characterization of a series of diiron(II) complexes with sterically hindered terphenyl carboxylate ligands and alkyl amine donors are presented. The compounds [Fe(2)(mu-O(2)CAr(Tol))(4)(L)(2)] (L=NH(2)(CH(2))(2)SBn (1); NH(2)(CH(2))(3)SMe (2); NH(2)(CH(2))(3)CCH (3)), where (-)O(2)CAr(Tol) is 2,6-di(p-tolyl)benzoate, and [Fe(2)(mu-O(2)CAr(Xyl))(2)(O(2)CAr(Xyl))(2)(L)(2)] (L=NH(2)(CH(2))(3)SMe (4); NH(2)(CH(2))(3)CCH (5)), where (-)O(2)CAr(Xyl) is 2,6-di(3,5-dimethylphenyl)benzoate, were prepared as small molecule mimics of the catalytic sites of carboxylate-bridged non-heme diiron enzymes. The compounds with the (-)O(2)CAr(Tol) carboxylate form tetrabridged structures, but those containing the more sterically demanding (-)O(2)CAr(Xyl) ligand have only two bridging ligands. The ancillary nitrogen ligands in these carboxylate-rich complexes incorporate potential substrates for the reactive metal centers. Their oxygenation chemistry was studied by product analysis of the organic fragments following decomposition. Compound 1 reacts with dioxygen to afford PhCHO in approximately 30% yield, attributed to oxidative dealkylation of the pendant benzyl group. Compound 3 decomposes to form Fe(II)Fe(III) and Fe(III)Fe(IV) mixed-valence species by established bimolecular pathways upon exposure to dioxygen at low temperatures. Upon decomposition, the alkyne-substituted amine ligand was recovered quantitatively. When the (-)O(2)CAr(Tol) carboxylate was replaced by the (-)O(2)CAr(Xyl) ligand in 5, different behavior was observed. The six-coordinate iron(III) complex with one bidentate and two monodentate carboxylate ligands, [Fe(O(2)CAr(Xyl))(3)(NH(2)(CH(2))(3)CCH)(2)] (6), was isolated from the reaction mixture following oxidation.     

Formation of superoxide anion during ferrous ion-induced decomposition of linoleic acid hydroperoxide under aerobic conditions

We studied the mechanism of formation of oxygen radicals during ferrous ion-induced decomposition of linoleic acid hydroperoxide using the spin trapping and chemiluminescence methods. The formation of the superoxide anion (O2*-) was verified in the present study. The hydroxyl radical is also generated through Fenton type decomposition of hydrogen peroxide produced on disproportionation of O2*-. A carbon-centered radical was detected using 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline N-oxide (DEPMPO) as a spin trap. Alkoxyl radical formation is essential for the conversion of linoleic acid hydroperoxide into the peroxyl radical by ferrous ion. It is likely that the alkoxyl radical [R1CH(O*)R2] is converted into the hydroxylcarbon radical [R1C*(OH)R2] in water, and that this carbon radical reacts with oxygen to give the alpha-hydroxyperoxyl radical [R1R2C(OH)OO*], which decomposes into the carbocation [R1C+(OH)R2] and O2*-.     

Effect of zinc ion on the interaction of some amino acid compounds of copper(II) with hydrogen peroxide.

Reaction of elemental copper and zinc powder mixtures with glycine (NH2.CH2COOH; HA) or aspartic acid (NH2CHCOOHCH2COOH; H2B) (in 1:1:2 ratio, respectively) in the presence of excess hydrogen peroxide (H2O2) at 50 degrees C, results in the formation of a new mixed metal peroxy carbonate compound corresponding to formula [Cu(Zn)2(O2(2-) (CO3)2(H2O)4], while the same reaction with elemental copper powder alone yields merely peroxy amino acid compounds having the formula [Cu(O2(2-)) (HA)2(H2O)] and [Cu(O2(2-)) (H2B) (H2O)2] for glycine and aspartic acid, respectively. These compounds have been characterized by elemental analysis, ESR, and electronic and IR spectra. It is interesting to note that both amino acids are converted to carbonate in the presence of zinc alone. A method analogous to that described above, for the reaction of elemental copper, zinc powder mixtures with succinic acid [(CH2COOH)2] or acetic acid (CH3COOH) in excess H2O2, on the other hand, gave a product essentially comprising copper succinate or acetate, respectively. These observations suggest an interesting and perhaps important phenomenon by which only the simple amino acids such as glycine and aspartic acid are converted to carbonates while their corresponding carboxylic acids form only their respective salts.     

Alteration of protein structure induced by low-energy (<18 eV) electrons. I. The peptide and disulfide bridges

We present measurements of low-energy (<18 eV) electron-stimulated desorption of anions from acetamide (CH(3)CONH(2)) and dimethyl disulfide [DMDS: (CH(3)S)(2)] films. Electron irradiation of physisorbed CH(3)CONH(2) produces H(-), CH(3)(-) and O(-) anions, whereas the H(-), CH(2)(-), CH(3)(-), S(-), SH(-) and SCH(3)(-) anions are observed to desorb from the DMDS film. Below 12 eV, the dependence of the anion yields on the incident electron energy exhibits structures that indicate that a resonant process (i.e. dissociative electron attachment) is responsible for molecular fragmentation. Within the range of 1-18 eV, it is found that (1.7 and 1.4) x 10(7) H(-) ions/incident electron and (7.8 x 10(-11) and 4.3 x 10(-8)) of the other ions/incident electron are desorbed from acetamide and DMDS films, respectively. These results suggest that, within proteins, the disulfide bond is more sensitive to low-energy electron attack than the peptide bond. In biological cells, some proteins interact closely with nucleic acid. Therefore, the observed fragments, when produced from secondary low-energy electrons generated by high-energy radiation, not only may denature proteins, but may also induce reactions with the nearby nucleic acid and damage DNA.     

Synthetic analogs for oxovanadium(IV/V)-glutathione interaction: an NMR, EPR, synthetic and structural study of oxovanadium(IV/V) compounds with sulfhydryl-containing pseudopeptides and dipeptides

The reaction of [VO(CH3COO)2(phen)] (phen = 1,10-phenanthroline) with the sulfhydryl-containing pseudopeptides (scp), N-(2-mercaptopropionyl)glycine (H3mpg), N-(2-mercaptopropionyl)cysteine (H4m2pc), N-(3-mercaptopropionyl)cysteine (H4m3pc) and the dipeptides glycylglycine (H2glygly) and glycyl-L-alanine (H2glyala), in the presence of triethylamine, results in the formation of the compounds Et3NH[VO(mpg)(phen)] (1), (Et3NH)2[VO(m2pc)] (4), [(Et3NH)2[VO(m3pc) (5), [VO(glygly)(phen)] x 2CH3OH (2 x 2CH3OH) and [VO(glyala)(phen)] x CH3OH (3 x CH3OH). Evidence for the molecular connectivity in 2 x CH3OH was established by X-ray crystallography, showing the vanadium(IV) atom ligated to a tridentate glygly2- ligand at the N(amine), N(peptide) and O(carboxylato) atoms. Combination of the correlation plot of the EPR parameters gz versus Az, together with the additivity relationship supported the prediction of the equatorial donor atom sets of the V(IV)O2+ center at various pH values for the V(IV)O2+-glutathione system considered in this study. Model NMR studies (interaction of vanadium(V) with the scp H3mpg) showed that there is a possibility of vanadium(V) ligation to glutathione.     

New, partially hydrolyzable synthetic analogues of lecithin, phosphatidyl ethanolamine, and phosphatidic acid

The synthesis of two new synthetic analogues of lecithin, two of phosphatidyl ethanolamine ("cephalin"), and one new phosphatidic acid analogue is described. They comprise one of each of the following types: the "isosteric" diether lecithin and cephalin analogues ROCH(2)CH(OR)- CH(2)CH(2)P(O) (O(-))OCH(2)CH(2)N(+)R'(3) (R = C(18)H(37); R' = H or CH(3)); and the "hydrocarbon" analogues of phosphatidic acid, lecithin, and cephalin, C(17)H(35)CH(2)CH(C(18)H(37))CH(2)P(O)(R) = (R'); [R = R' = OH; R = O(-), R' = OCH(2)CH(2)N(+)(CH(3))(3); and R = O(-), R' = OCH(2)CH(2)N(+)H(3)]. Infrared spectra and other properties of these compounds are described.     

The first structural study on a cyclic tricoordinate phosphorochloridite and a pentacoordinate phosphorane based on 1,2,3,5-protected myo-inositol--a new conformation of 1,3,2-dioxaphosphorinane ring

Treatment of the phosphoramidite [myo-C(6)H(6)-2-[OC(O)Ph]-1,3,5-(O(3)CH)-4,6-(O(2)P-NH-i-Pr)] with o-chloranil affords the first example of inositol-based pentacoordinate phosphorane [myo-C(6)H(6)-2-[OC(O)Ph]-1,3,5-(O(3)CH)-4,6-(O(2)P-NH-i-Pr)(1,2-O(2)C(6)Cl(4))] (9) (X-ray structure) with a trigonal bipyramidal geometry at phosphorus. The six-membered 1,3,2-dioxaphosphorinane ring with the inositol residue has an unusual boat conformation in 9 which is quite different from that found in unrestrained rings investigated before, but is similar to that of its P(III) chloro precursor [myo-C(6)H(6)-2-[OC(O)Ph]-1,3,5-(O(3)CH)-4,6-(O(2)PCl)] (X-ray structure). Also, a convenient and chromatography-free procedure for the protected myo-inositol derivative [myo-C(6)H(6)-2-[OC(O)Ph]-1,3,5-(O(3)CH)-4,6-(OH)(2)] is reported.     

Synthetic procedures to monomethyl-platinum(II) complexes containing nitrogen ligands of biological relevance

The complex trans-bis(dimethylsulfoxide)chloromethylplatinum(II) (1) is fairly soluble in water, where it undergoes multiple equilibria involving the formation of geometrically distinct [Pt(H(2)O)(DMSO)Cl(CH(3))] aqua-species. On reacting an aqueous solution of 1 with monodentate nitrogen donor ligands L, such as pyridines or amines, two well distinct patterns of behavior can be recognized: (i) a single stage fast substitution of one DMSO by the entering ligand, yielding a complex of the type trans(C,N)-[Pt(DMSO)(L)Cl(CH(3))] which contains four different groups coordinated to the metal and which undergoes a slow conversion into its cis-isomer, (ii) a double substitution affording cationic complex ions of the type cis-[Pt(L)(2)(DMSO)(CH(3))](+). When this latter reaction is carried out using sterically hindered ligands, slow rotation of the bulk ligand around the Pt[bond]N bond allows for the identification of head-to-head and head-to-tail rotamers in solution, through (1)H NMR spectrometry. The addition of chloride anion to 1 leads to the anionic species cis-[Pt(DMSO)Cl(2)(CH(3))](-), where a molecule of DMSO still remains coordinated to the metal center, despite its quite fast rate of ligand exchange (k(exch) with free DMSO=12+/-1 s(-1)). The reaction of complex 1 with bidentate ligands, such as ethylenediamine (en) or simple amino acids, leads to the cationic species [Pt(en)(DMSO)(CH(3))](+) or to the neutral [Pt(DMSO)(N[bond]O)(CH(3))], (where N[bond]-O[double bond]GlyO(-), AlaO(-)).     

Density functional geometry optimization and energy calculations of calcium(II)-triphosphate complexes. Polyphosphates as possible dissolving agents for calcium pyrophosphate dihydrate crystals in chondrocalcinosis disease

Geometry optimizations and energy calculations have been carried out via molecular orbital methods at the density functional B3LYP/LANL2DZ level on the molecules PO3-, OPO3(3-), HOPO3(2-), CH3OPO3(2-), H(CH3OPO3)-, O(PO3)2(4-), HO(PO3)2(3-), CH2(PO3)2(4-), (CH3OPO2)O(PO3)3-, O(PO3)3(5-), HO(PO3)3(4-), (PO3)3(3-), (CH3OPO2)O(PO3)2(4-), [Mg[O(PO3)2)]]2-, [Ca[O(PO3)2]]2-, [Ca[CH2(PO3)2]]2-, [Ca[CH3OPO2)O(PO3)]]-, [Ca(PO3)3]-, [Ca[O(PO3)3]]3-, and [Ca[CH3OPO2)O(PO3)2]]2- with the aim to find reliable and easily accessible computational methods to simulate some phosphate-containing molecules of importance for the living cells and to study the energetics for protonation and metal-complex formation reactions. The analysis is part of a general investigation on phosphate-containing molecules as potential dissolving agents for calcium pyrophosphate dihydrate (CPPD) crystals which deposit in certain articular diseases. The basis set was expanded to 6-31G** for the P atoms for all the molecules investigated and to 6-31G* for the O atoms for OPO3(3-). Calculations at the semiempirical MNDO/d level were also carried out for comparison purposes on the free ligand molecules and on [Mg[O(PO3)2]]2-. The density functional analysis reproduced well the geometry found at the solid state via X-ray diffraction. The analyses of the geometrical parameters and the total electronic energy of the molecules shows that O(PO3)2(4-) and other di- and tri-phosphates are versatile ligands for divalent metal ions like Ca2+. The computed P-O-P bond angle for free O(PO3)2(4-) is 180 degrees and the conformation of the two PO3- groupings is staggered along the P...P vector. The linear arrangement for P-O-P is assisted by P-O pi interactions. The bending of the P-O-P angle when accompanied by a slight P-O(b) elongation requires a very small amount of energy; 4.65 kcal/mol to pass from 180 to 140 degrees , as calculated at the DFT level. The computed Ca-O and Mg-O bond distances for [M[O(PO3)2]]2- are 2.378 and 2.079A, when the metal ions link two oxygen atoms from each PO3 group. The computed Ca-O bond lengths for [Ca[CH3OPO2)O(PO3)]]- are 2.482 (PalphaO2) and 2.358A (PbetaO2), showing a significant lengthening for Ca-OPalpha, when compared to the pyrophosphate derivative. The Ca-O bond lengths for [Ca[O(PO3)3]]3- and [Ca[CH3OPO2)O(PO3)2]]2- are 2.251A and 2.525 (PalphaO2), 2.407 and 2.338 (PbetaO2), and 2.251 and 2.228A (PgammaO2), showing a shortening for the Ca-OPgamma bond upon methylation. The (Pbeta)O-Pgamma bond length increases significantly (0.09 A) upon Ca(II) coordination to (CH3OPO2)O(PO3)2(4-) via all the three PO3 groups. This latter result suggests that metal complexes of linear organic-triphosphates have a larger tendency to release the PgammaO3 group when compared to the free ligand molecules. The electronic contribution to the energy of the complex formation reaction for [Ca[CH2(PO3)2]]2- is only slightly higher (some 1.8 kcal) than that for [Ca[O(PO3)2]]2-; but is much higher (some 63 kcal) than that relevant to the formation of [Ca[CH3OPO2)O(PO3)2]]2-. (ABSTRACT TRUNCATED)     

Synthesis of redox derivatives of lysine and related peptides containing phenothiazine or tris(2,2'-bipyridine)ruthenium(II).

Boc-L-Lysine derivatives and lysine-containing peptides bearing the electron donor 10H-phenothiazine (PTZ) or the redox chromophore tris(2,2'-bipyridine)ruthenium(II) dication ([Rub3]2+, where b is 2,2'-bipyridine) have been synthesized and characterized. SeO2 oxidation (53% yield) of 4,4'-dimethyl-2,2'-bipyridine, Ag2O oxidation (85% yield) of the monoaldehyde, complexation (96% yield) of 4'-methyl-2,2'-bipyridine-4-carboxylic acid (m-OH) with Rub2Cl2, activation (81% yield) of the acid [Rub2m-OH]2+ (PF6-)2, and condensation (83% yield) of the succinimido ester [Rub2m-OSu]2+ (PF6-)2 with Boc-Lys furnished the protected redox-chromophore module [Boc-Lys(Rub2m)-OH]2+ (PF6-)2 in 29% overall yield over five steps. The first two steps constitute the first practical synthesis of the monocarboxylic acid m-OH (45% overall yield). Also prepared were m-OSu, Boc-Lys(m)-OH, Boc-Lys(m)-OCH3, and [Rub2m-NHCH3]2+ (PF6-)2. Activation (91% yield) of 3-(10H-phenothiazine-10)propanoic acid (PTZpn-OH) and condensation (92% yield) of the succinimido ester PTZpn-OSu with Boc-Lys furnished the protected electron-donor module Boc-Lys(PTZpn)-OH (84% overall yield). The latter was used in solid-phase syntheses of two redox tripeptides, CH3CO-Ala-Lys(PTZpn)-Ala-OH and [Rub2m-Ala-Lys(PTZpn)-Ala-OH]2+ (PF6-)2. The electrochemical properties of these redox amino acids and peptides were similar to those of PTZpn-OH, [Rub2m-OH]2+ (PF6-)2, or [Rub2m-NHCH3]2+ (PF6-)2. Lys(PTZpn), [Lys(Rub2m)]2+ (PF6-)2, and other redox modules may be useful for engineering light-harvesting proteins, photovoltaic cells, and other molecular electronic devices.     

Effect of phosphate ions on the fluorescence of tryptophan derivatives. Implications in fluorescence investigation of protein-nucleic acid complexes

In order to test the ability of phosphate groups to quench the fluorescence of tryptophan in protein-nucleic acid complexes we have studied the effect of various phosphate ions on the fluorescence of tryptophan derivatives. Unsubstituted and monoalkyl monoanions (H2PO4- and CH3OPO3H-) quench the fluorescence of all investigated indole derivatives while the dimethyl anion (CH3O)2 PO2- does not. This suggests that quenching of tryptophan fluorescence by phosphate monoanions requires the presence of an acidic OH group and could be due to a proton transfer from the phosphate ion to the indole chromophore. Trianions (PO4 3-4) which are strong proton acceptors quench the fluorescence of all tryptophan derivatives except N(1)methyl tryptophan. This result strongly supports our proposal that quenching of tryptophan fluorescence by phosphate trianions occurs through deprotonation of the NH indole group. Bianions (HPO '4(7), and CH3O PO3 2-3) quench the fluorescence of several indole derivatives including N-acetyl tryptophanamide but have no effect on tryptophan or N(1)-methyl tryptophan. From our results we conclude that phosphate groups of nucleic acids are not able to quench the fluorescence of tryptophyl residues in protein-nucleic acid complexes except if an accessible residue is located near a phosphorylated polynucleotide chain end.     

Methanofuran (carbon dioxide reduction factor), a formyl carrier in methane production from carbon dioxide in Methanobacterium

Methanofuran (carbon dioxide reduction factor) became labeled when incubated in cell extracts of Methanobacterium under hydrogen and 14CO2 in the absence of methanopterin. Proton NMR spectroscopy revealed that a formyl group was bound to the primary amine of methanofuran. [14C]Formylmethanofuran was enzymically converted to 14CH4 in the presence of CH3-S-CoM [2-(methylthio)ethanesulfonic acid], hydrogen, and methanopterin, establishing the formyl moiety as an intermediate in methanogenesis. In the absence of methanopterin, a substantial portion of the formyl label was oxidized to 14CO2 rather than reduced to 14CH4, consistent with a model in which the C1 intermediate is first bound to methanofuran and then to methanopterin, during its reduction. When CH3-S-CoM was replaced by HS-CoM (2-mercaptoethanesulfonic acid), most of the formyl label was oxidized to 14CO2, indicating that methyl group reduction by the CH3-S-CoM methylreductase is required for the conversion of formylmethanofuran to methane.     

Copper(I)-alkyl sulfide and -cysteine tri-nuclear clusters as models for metallo proteins: a structural density functional analysis

After having set up the computational methodology for Cu(I)-sulfur systems as models for copper proteins, namely using the simple ligands H(2)S, HS(-), CH(3)SH, and CH(3)S(-), the Cu(I)-Cysteine systems have been investigated: [Cu(I)( S -H(2)Cys) (n) ](+) (H(2)Cys, cysteine, NH(2),SH,COOH) [Cu(I)( S -HCys) (n) ](1-) (n) (NH(2),S(-),COOH). Finally, the structures for bi-nuclear [Formula: see text] (Et, CH(2)CH(3)), [Formula: see text] and tri-nuclear [Cu(I)( S -SH)](3), [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text] (NH(2),SH,COOH), [Formula: see text] (NH(2),S(-),COOH, and NH(2),SH,COO(-)), as well as [Formula: see text] (NH(2),S(-),COO(-)), were also optimized to mimic the active center for a metallo-chaperone copper transport protein (CopZ). The X-ray structures for the biomolecules were matched fairly well as regards the Cu-S bond distances and Cu…Cu contact distances in the case the model cysteine S atom is deprotonated. Upon protonation of ligand S atoms, the conformation of clusters is altered and might bring about the di- and tri-nuclear core breakage. These findings suggest that subtle protonation/deprotonation steps, i.e. small and/or local pH changes play a significant role for copper transport processes.     

On the structures of flavoprotein D-amino acid oxidase purple intermediates. A resonance Raman study

Resonance Raman (RR) spectra were obtained in H2O or D2O solution for the purple intermediates of D-amino acid oxidase (DAO) with isotopically labeled substrates, i.e., [1-13C]-, [2-13C]-, [3-13C]-, [15N]-, and [3,3,3-D3]alanine; [carboxyl-13C]- and [15N]proline. RR spectra were also measured for the intermediates of DAO reconstituted with isotopically labeled FAD's, i.e., [4a-13C]-, [4,10a-13C2]-, [2-13C]-, [5-15N]-, and [1,3-15N2]FAD in D2O. The isotopic shift of the 1692 cm-1 band upon [15N]- or [2-13C]-substitution of alanine indicates that the band is due to the C = N stretching mode of an imino acid derived from D-alanine, i.e., alpha-iminopropionate. The 1658 cm-1 band with D-proline was also assigned to the C = N stretching mode of an imino acid derived from D-proline, i.e., delta 1-pyrrolidine-2-carboxylate, since the band shifts to 1633 cm-1 upon [15N]-substitution and its stretching frequency is generally found in this frequency region. Since the band shifts to low frequency in D2O, the imino acid should have a protonated imino group such as the C = N+1H form. The intense band at 1363 cm-1 with D-alanine was assigned to a mixing of the CO2- symmetric stretching and CH3 symmetric deformation modes in alpha-iminopropionate, based on the isotope effects. The 1359 cm-1 band with D-proline has probably contributions of CO2- symmetric stretching and CH2 wagging, considering the isotope effects with [carboxyl-13C]proline. The 1359 cm-1 band with D-proline was split into 1371 cm-1 and 1334 cm-1 bands in D2O. As this splitting of the 1359 cm-1 band with D-proline in D2O can not be interpreted only by the replacement of the C = N+1-H proton by deuterium, the carboxylate of the imino acid probably interacts with the enzyme through some proton(s) exchangeable by deuterium(s) in D2O. The bands around 1605 cm-1 which shift upon [4a-13C]- and [4,10a-13C2]-labeling of FAD are derived from a fully reduced flavin, because the isotopic shifts of the band are very different from those of the bands of oxidized or semiquinoid flavin observed near 1605 cm-1.(ABSTRACT TRUNCATED AT 400 WORDS)     

Stabilization of G x C-containing DNA duplexes by polyamides with parallel orientation in the minor groove

The polyamides based on 4-amino-1-methylpyrrol-2-carboxylic acid, 4-amino-1-methylimidazole-2-carboxylic acid, and beta-alanine that stabilize oligonucleotide duplexes consisting of G x C pairs through parallel packing in the minor groove were studied. The initial duplex TTGCGCp x GCGCAA melts at 28 degrees C; the TTGCGCp[NH(CH2)3COPyIm betaImNH(CH2)3NH(CH3)2][NH(CH2)3COIm betaImPyNH(CH2)3N(CH3)2] x GCGCAA duplex (bisphosphoramidate with parallel orientation of ligands, where Py, Im, and beta are the residues of 1-methyl-4-aminopyrrol-2-carboxylic and 1-methyl-4-aminoimidazole-2-carboxylic acids and beta-alanine, respectively), at 48 degrees C; and the TTGCGCp[NH(CH2)3COIm betaImPyNH(CH2)3COIm betaImPyNH(CH2)3N(CH3)2] x GCGCAA duplex (a hairpin structure with antiparallel orientation), at 56 degrees C. The English version of the paper: Russian Journal of Bioorganic Chemistry, 2004, vol. 30, no. 5; see also http: // www.maik.ru.     

Selective isopeptide bond formation: coupling ubiquitin(67-76) with histone 2A(114-128) by use of the transfer active ester condensation technique.

A peptide, ubiquitin(67-76)-histone 2A(114-128) fragment (UBH2AF), was synthesized by selective formation of an isopeptide bond between the C-terminus of ubiquitin(67-76) and the epsilon-amino group of lysine-119 in histone 2A(114-128) which contained 4 lysine residues at positions 118, 119, 125 and 127, respectively. The transfer active ester condensation technique, together with the Tnm amine protecting group, were used successfully in the peptide segment coupling reaction. [structure: see text]