Activation of class 1 integron integrase is promoted in the intestinal environment

Class 1 integrons are widespread genetic elements playing a major role in the dissemination of antibiotic resistance. They allow bacteria to capture, express and exchange antibiotic resistance genes embedded within gene cassettes. Acquisition of gene cassettes is catalysed by the class 1 integron integrase, a site-specific recombinase playing a key role in the integron system. In in vitro planktonic culture, expression of intI1 is controlled by the SOS response, a regulatory network which mediates the repair of DNA damage caused by a wide range of bacterial stress, including antibiotics. However, in vitro experimental conditions are far from the real lifestyle of bacteria in natural environments such as the intestinal tract which is known to be a reservoir of integrons. In this study, we developed an in vivo model of intestinal colonization in gnotobiotic mice and used a recombination assay and quantitative real-time PCR, to investigate the induction of the SOS response and expression and activity of the class 1 integron integrase, IntI1. We found that the basal activity of IntI1 was higher in vivo than in vitro. In addition, we demonstrated that administration of a subinhibitory concentration of ciprofloxacin rapidly induced both the SOS response and intI1 expression that was correlated with an increase of the activity of IntI1. Our findings show that the gut is an environment in which the class 1 integron integrase is induced and active, and they highlight the potential role of integrons in the acquisition and/or expression of resistance genes in the gut, particularly during antibiotic therapy.     

Analysis by Mutagenesis of a Chromosomal Integron Integrase from Shewanella amazonensis SB2BT

Integrons are mobile genetic elements that can integrate and disseminate genes as cassettes by a site-specific recombination mechanism. Integrons contain an integrase gene (intI) that carries out recombination by interacting with two different target sites; the attI site in cis with the integrase and the palindromic attC site of a cassette. The plasmid-specified IntI1 excises a greater variety of cassettes (principally antibiotic resistance genes), and has greater activity, than chromosomal integrases. The aim of this study was to analyze the capacity of the chromosomal integron integrase SamIntIA of the environmental bacterium Shewanella amazonensis SB2BT to excise various cassettes and to compare the properties of the wild type with those of mutants that substitute consensus residues of active integron integrases. We show that the SamIntIA integrase is very weakly active in the excision of various cassettes but that the V206R, V206K, and V206H substitutions increase its efficiency for the excision of cassettes. Our results also suggest that the cysteine residue in the β-5 strand is essential to the activity of Shewanella-type integrases, while the cysteine in the β-4 strand is less important for the excision activity.Integrons are genetic elements that capture and rearrange genes that are contained within mobile gene cassettes by a mechanism of site-specific recombination mediated by an integrase (3). Several types of integron integrases have been described for clinical and environmental bacteria; classes 1, 2, and 3 integron integrases (1, 10, 11) and VchIntIA (17) and IntI9 (12) integrases are the only ones that are associated with antibiotic resistance genes. Some of these integrases were found exclusively on plasmids (IntI2*) (11) or on chromosomes (VchIntIA) (17), while others were found in both genetic contexts (IntI1) (7, 8, 20, 21). The efficiency of integron integrases to carry out cassette excision varies from one integrase to another and also depends on the structure and sequence of the attC sites located at both ends of the gene. IntI1 is generally the most active integrase, followed by IntI3. IntI2*179E and SonIntIA are less active but appear to tolerate more variation in attC sites. These enzymes could serve as models for determining important residues responsible for high levels of activity, using mutagenesis to substitute consensus residues and assaying for gain of function.Class 1 integrons, carrying the intI1 integrase gene, are generally associated with mobile elements, such as plasmids and Tn21-like transposons, and are most frequently found in clinical isolates (18). They are found mainly among gram-negative bacteria and especially among enterobacteria and pseudomonads (14). Class 1 integrons have also been found in some gram-positive bacteria, such as Enterococcus, Staphylococcus, and Corynebacterium (6). The clinical-type class 1 integrons (7) consist of two conserved regions and a variable region in which resistance genes are inserted in the form of cassettes (Fig. ​(Fig.1A).1A). These integrons were clearly derived from a structure related to Tn402, as they share many characteristics associated with this type of transposon (21). The common ancestor of clinical-type class 1 integrons was possibly a member of an integron pool that was acquired by diverse Betaproteobacteria (7). This hypothesis is based on the recent isolation of several new class 1 integron integrases from environmental DNA samples which are not associated with antibiotic resistance genes or with Tn402-like transposons (7, 8, 21).Open in a separate windowFIG. 1.(A) General structure of clinical-type class 1 integrons. Cassettes are inserted in the variable region of integrons by a site-specific recombinational mechanism. The attI1 and attC sites are shown by tiling and diagonal black lines, respectively, and promoters are denoted by P1, P2, P3, and P. Genes are as follows: intI1, integrase gene; qacEΔ1, antiseptic resistance gene; sul1, sulfonamide resistance gene; orf5, gene of unknown function. (B) Representation of the chromosomal integron of S. amazonensis SB2BT. The attI_Sam and attC sites are shown by a black box and horizontal black lines, respectively. Genes are as follows: SamintIA, integrase gene; orf, open reading frame gene.Class 2 integrons, carrying the intI2* integrase pseudogene, are present on Tn7 transposons and their derivatives (11). The intI2* gene encodes an integrase identical to 46% with IntI1, but its reading frame was interrupted by an early termination codon. The activity of this protein is restored when the stop codon at position 179 is replaced by a glutamate codon (11). Recently, two new intI2 genes were identified within integrons found in Providencia stuartii (2) and Escherichia coli (16). The sequences of these genes are not interrupted; position 179 is occupied by a glutamine codon, and the genes apparently code for functional enzymes. These intI2 genes each differ from intI2* of Tn7 at five positions (2, 16).Class 3 integrons, characterized by the presence of the intI3 gene, have been found in Serratia marcescens AK9373, in Klebsiella pneumoniae FFUL 22K isolated in Portugal, in four strains of Pseudomonas putida isolated in Japan, and more recently, in Delftia acidovorans C17 and Delftia tsuruhatensis A90 (1, 4, 19, 23). The IntI3 integrase has 61% identity with IntI1.The class 4 integron, with VchintIA, is an integron carried by the small chromosome of Vibrio cholerae O:1 569B (17). This integron contains more than 216 open reading frames (ORFs) coding for proteins of unknown functions associated with V. cholerae repetitive DNA sequence (VCR) elements to form 179 cassettes, and occupies about 3% of the bacterial genome.In recent years, the draft genomes of various environmental strains led to the identification of more than 100 new integron integrases. Among these, the SonintIA and NeuintIA integrase genes have been found, respectively, in genomes of Shewanella oneidensis MR-1 and Nitrosomonas europaea and shown to be active in cassette excision and integration (5, 13). Shewanella amazonensis SB2BT is an environmental gram-negative gammaproteobacterium that plays an important role in the bioremediation of contaminated metals and radioactive wastes (22). The U.S. Department of Energy Joint Genome Institute sequenced its 4.3-Mbp genome (GenBank accession no. {"type":"entrez-nucleotide","attrs":{"text":"CP000507","term_id":"119765642","term_text":"CP000507"}}CP000507). The genome encodes an integron integrase, SamIntIA, which is 64.8% identical to SonIntIA and 60.2% identical to IntI2* but only 46.9% identical to VchIntIA and 44.6% to IntI1. A sequence alignment of SamIntIA, SonIntIA, and IntI2* indicates that they are closely related, especially in the N-terminal and the C-terminal regions.Several residues of SamIntIA differed from a consensus alignment of active integron integrases. We wished to determine whether SamIntIA is active, compare its activity to that of SonIntIA and of IntI2*179E, and determine whether the alteration of certain residues affects its excision activity.     

Integrons and gene cassettes: hotspots of diversity in bacterial genomes

Integrons are genetic units found in many bacterial species that are defined by their ability to capture small mobile elements called gene cassettes. Cassettes usually contain only one gene, potentially any gene, and an attC recombination site, and thousands of cassettes have been sequenced. A specialized IntI site-specific recombinase encoded by the integron recognizes attC and incorporates cassettes into an attI site located adjacent to the intI gene. Over 100 types of integrons have been found, most in bacterial chromosomes. They can all potentially share the same cassettes and, as recombination between attC in a cassette and an attI can occur repeatedly, an integron can contain from zero to hundreds of cassettes. Cassette arrays that are not located next to an intI gene, or solo cassettes at apparently random sites, are also seen. Hence, integrons contribute to generation of diversity in bacterial, plasmid, and transposon genomes and facilitate extensive sharing of information among bacteria.     

The IntI-like tyrosine recombinase of Shewanella oneidensis is active as an integron integrase

We have found an integron-like integrase gene and an attI site in Shewanella oneidensis as part of a small chromosomal integron. We have cloned this gene and tested the ability of the integrase to excise cassettes from various integrons. Most cassettes flanked by two attC sites are readily excised, while cassettes in the "first" position, with an attI1 or attI3 site on one end, are not excised. An exception is a cassette with attI2 on one end. The attI2 site, from Tn7, has greater similarity to the attI site adjacent to the integrase of S. oneidensis than do attI1 or attI3. We cloned the attI site of S. oneidensis and observed the integration of two different cassettes. We have, therefore, demonstrated the function of this integron-like integrase.     

Analysis of integrons in clinical isolates of Escherichia coli in China during the last six years

A multiple PCR for the detection of the integrase genes of the three classes of integrons was carried out, and their gene cassettes were characterized in 111 clinical strains of Escherichia coli isolated in Guangzhou City, China during the last 6 years. IntI1 and intI2 genes were detected in 95 isolates (85.6%) and four isolates (3.6%), respectively. No intI3 gene was detected. Six different gene cassettes were found in these strains, and a high prevalence of dfr and aad genes was observed. The E. coli isolates that contained a 1664-bp amplicon of dfrA17-aadA5 in class 1 integron were found to be phylogenetically unrelated to each other by using the enterobacterial repetitive intergenic consensus PCR, as the cassette could be transferred to recipient strains, indicating that the gene cassettes might be disseminated in the clinical strains by a horizontal gene transfer. Therefore, it is important that guidelines for the prudent use of antimicrobial agents are adopted and surveillance programs are established.     

Genetic diversity analyses of class 1 integrons and their associated antimicrobial resistance genes in Enterobacteriaceae strains recovered from aquatic habitats in China

Aims: To characterize the molecular diversity of class 1 integrons and antibiotic resistance (AR) genes of Enterobacteriaceae strains recovered from aquatic habitats in Jinan, Shandong Province, China. Methods and Results: Six hundred and thirty‐eight antimicrobial‐resistant Enterobacteriaceae isolated from wastewater were examined for class 1 integron. Of these, 293 were positive for the class 1 integrase gene intI1; among these, 34 gene cassettes and 29 AR genes were detected. Twenty‐nine distinct gene cassette arrays were identified by restriction fragment length polymorphism (RFLP). Seven strains harboring novel gene cassette arrays were subjected to further study, in which antimicrobial susceptibility profiles were determined, and the presence of other AR genes outside of the integrons was assayed. Several of the resistance determinants were found to be transferable by conjugation or transformation. Conclusions: This study established the assessment of class 1 integron and antimicrobial resistance gene patterns among environmental Enterobacteriaceae. Also, a restriction enzyme EcoRII was employed to develop a rapid and simple method for characterizing gene cassette arrays by RFLP analysis, which facilitated further study of novel gene cassette arrays. Significance and Impact of Study: These data not only illustrated the diversity of class 1 integron gene cassettes but also provided direct evidence that integrons mobilized gene cassettes, generating new linkages of resistance genes, and they could be integrated in gene transfer units such as conjugative plasmids to contribute to the dissemination of AR genes by horizontal gene transfer (HGT) in aquatic environments.     

Recombination activity of a distinctive integron-gene cassette system associated with Pseudomonas stutzeri populations in soil

Class 1 integrons have strongly influenced the evolution of multiple antibiotic resistance. Diverse integrons have recently been detected directly in a range of natural environments. In order to characterize the properties of these environmental integrons, we sought to isolate organisms containing integrons from soils, which resulted in the isolation of Pseudomonas stutzeri strain Q. Further isolation efforts targeted at this species resulted in recovery of two other strains (P and BAM). 16S rRNA sequences and chromosome mapping showed that these three strains are very closely related clonal variants in a single genomovar of P. stutzeri. Only strains Q and BAM were found to contain an integron and an associated gene cassette array. The intI and attI components of these strains showed 99 and 90% identity, respectively. The structure of these integrons and their associated gene cassettes was similar to that reported previously for other integron classes. The two integrons contained nonoverlapping sets of cassette-associated genes. In contrast, many of the cassette-associated recombination sites in the two integrons were similar and were considered to constitute a distinct subfamily consisting of 59-base element (59-be) recombination sites (the Pseudomonas subfamily). The recombination activity of P. stutzeri integron components was tested in cointegrate assays. IntIPstQ was shown to catalyze site-specific recombination between its cognate attI site and 59-be sites from antibiotic resistance gene cassettes. While IntIPstQ did not efficiently mediate recombination between members of the Pseudomonas 59-be subfamily and other 59-be types, the former sites were functional when they were tested with IntI1. We concluded that integrons present in P. stutzeri possess recombination activity and represent a hot spot for genomic diversity in this species.     

Mobile gene cassettes and integrons: capture and spread of genes by site-specific recombination

An integron is a genetic unit that includes the determinants of the components of a site-specific recombination system capable of capturing and mobilizing genes that are contained in mobile elements called gene cassettes. An integron also provides a promoter for expression of the cassette genes, and integrons thus act both as natural cloning systems and as expression vectors. The essential components of an integron are an int gene encoding a site-specific recombinase belonging to the integrase family, an adjacent site, attl, that is recognized by the integrase and is the receptor site for the cassettes, and a promoter suitably oriented for expression of the cassette-encoded genes. The cassettes are mobile elements that include a gene (most commonly an antibiotic-resistance gene) and an integrase-specific recombination site that is a member of a family of sites known as 59-base elements. Cassettes can exist either free in a circularized form or integrated at the attl site, and only when integrated is a cassette formally part of an integron. A single site-specific recombination event involving the integron-associated attl site and a cassette-associated 59-base element leads to insertion of a free circular cassette into a recipient integron. Multiple cassette insertions can occur, and integrons containing several cassettes have been found in the wild. The integrase also catalyses excisive recombination events that can lead to loss of cassettes from an integron and generate free circular cassettes. Due to their ability to acquire new genes, integrons have a clear role in the evolution of the genomes of the plasmids and transposons that contain them. However, a more general role in evolution is also likely. Events involving recombination between a specific 59-base-element site and a nonspecific secondary site have recently been shown to occur. Such events should lead either to the insertion of cassettes at non-specific sites or to the formation of stable cointegrates between different plasmid molecules, and a cassette situated outside the integron context has recently been identified.     

The integron In1 in plasmid R46 includes two copies of the oxa2 gene cassette.

The sequence of the insert region of the integron In1 found in the IncN plasmid R46 was completed. The insert region is 2929 bases long and includes four gene cassettes, two of which are identical copies of the oxa2 gene cassette flanking an aadA1 cassette. The fourth cassette encodes an open reading frame orfD. From comparison of these data with published maps and sequences it is argued that the integrons found in the IncN plasmids pCU1 and R1767 and in the transposon Tn2410 are closely related to In1 from R46. Both site-specific gene insertion and recA-dependent recombination are likely to have contributed to the evolution of these integrons.     

Preclinical class 1 integron with a complete Tn402-like transposition module

The presence of integrons was assessed in gut bacteria isolated from wild-caught prawns. A pseudomonad was recovered that contained a Tn402-like class 1 integron with a complete transposition module and two gene cassettes. One cassette was identical to a previously described cassette from a chromosomal class 3 integron in Delftia tsuruhatensis.     

Study of mycoloyl transferase transport across the cell envelope of Corynebacterium glutamicum

A bla(VIM-2) metallo-beta-lactamase determinant, identical to that previously identified in Pseudomonas aeruginosa COL-1 isolate from a French hospital, was detected on a 28-kb plasmid carried by a nosocomial isolate of P. aeruginosa from Verona, Italy. In this plasmid the bla(VIM-2) determinant was inserted into a class 1 integron of original structure, named In72, that contains a partially deleted intI1 integrase gene and two gene cassettes. The first cassette carries an aacA4 aminoglycoside acetyl transferase determinant. The second cassette carries a bla(VIM-2) determinant followed by a partially deleted attC site. The structure of In72 was notably different from that of In56, the bla(VIM-2)-containing integron found in the COL-1 isolate, revealing the existence of molecular heterogeneity among bla(VIM-2)-containing integrons in clinical isolates of P. aeruginosa from Europe.     

The IntI1 Integron Integrase Preferentially Binds Single-Stranded DNA of the attC Site

IntI1 integrase is a member of the prokaryotic DNA integrase superfamily. It is responsible for mobility of antibiotic resistance cassettes found in integrons. IntI1 protein, as well as IntI1-COOH, a truncated form containing its carboxy-terminal domain, has been purified. Electrophoretic mobility shift assays were carried out to study the ability of IntI1 to bind the integrase primary target sites attI and aadA1 attC. When using double-stranded DNA as a substrate, we observed IntI1 binding to attI but not to attC. IntI1-COOH did not bind either attI or attC, indicating that the N-terminal domain of IntI1 was required for binding to double-stranded attI. On the other hand, when we used single-stranded (ss) DNA substrates, IntI1 bound strongly and specifically to ss attC DNA. Binding was strand specific, since only the bottom DNA strand was bound. Protein IntI1-COOH bound ss attC as well as did the complete integrase, indicating that the ability of the protein to bind ss aadA1 attC was contained in the region between amino acids 109 and 337 of IntI1. Binding to ss attI DNA by the integrase, but not by IntI1-COOH, was also observed and was specific for the attI bottom strand, indicating similar capabilities of IntI1 for binding attI DNA in either double-stranded or ss conformation. Footprinting analysis showed that IntI1 protected at least 40 bases of aadA1 attC against DNase I attack. The protected sequence contained two of the four previously proposed IntI1 DNA binding sites, including the crossover site. Preferential ssDNA binding can be a significant activity of IntI1 integrase, which suggests the utilization of extruded cruciforms in the reaction mechanisms leading to cassette excision and integration.     

Characterization of In0 of Pseudomonas aeruginosa plasmid pVS1, an ancestor of integrons of multiresistance plasmids and transposons of gram-negative bacteria.

Many multiresistance plasmids and transposons of gram-negative bacteria carry related DNA elements that appear to have evolved from a common ancestor by site-specific integration of discrete cassettes containing antibiotic resistance genes or sequences of unknown function. The site of integration is flanked by conserved segments coding for an integraselike protein and for sulfonamide resistance, respectively. These segments, together with the antibiotic resistance genes between them, have been termed integrons (H. W. Stokes and R. M. Hall, Mol. Microbiol. 3:1669-1683, 1989). We report here the characterization of an integron, In0, from Pseudomonas aeruginosa plasmid pVS1, which has an unoccupied integration site and hence may be an ancestor of more complex integrons. Codon usage of the integrase (int) and sulfonamide resistance (sul1) genes carried by this integron suggests a common origin. This contrasts with the codon usage of other antibiotic resistance genes that were presumably integrated later as cassettes during the evolution and spread of these DNA elements. We propose evolutionary schemes for (i) the genesis of the integrons by the site-specific integration of antibiotic resistance genes and (ii) the evolution of the integrons of multiresistance plasmids and transposons, in relation to the evolution of transposons related to Tn21.     

Binding of the purified integron DNA integrase IntI1 to integron- and cassette-associated recombination sites

The site-specific recombinase IntI1, encoded by class 1 integrons, catalyses the integration and excision of gene cassettes by recognizing two classes of sites, the integron-associated attI1 site and the 59-base element (59-be) family of sites that are associated with gene cassettes. IntI1 includes the four conserved amino acids that are characteristic of members of the integrase family, and IntI1 proteins with single amino acid substitutions at each of these positions had substantially reduced catalytic activity, consistent with this classification. IntI1 was purified as a fusion protein and shown to bind to isolated attI1 or 59-be recombination sites. Binding to attI1 was considerably stronger than to a 59-be. Binding adjacent to the recombination cross-over point was not detected. A strong IntI1 binding site within attI1 was localized by both deletion and footprinting analysis to a 14 bp region 24–37 bp to the left of the recombination cross-over point, and this region is known to be critical for recombination in vivo ( Recchia et al ., 1994 ). An imperfect (13/15) direct repeat of this region, located 41–55 bp to the left of the recombination cross-over point, contains a weaker IntI1 binding site. Mutation of the stronger binding site showed that a single base pair change accounted for the difference in the strength of binding.     

Excision and integration of cassettes by an integron integrase of Nitrosomonas europaea

We found in the environmental strain Nitrosomonas europaea a chromosomal integron-like structure with an integrase gene, intI(Neu). We have tested the capacity of the IntINeu integrase to excise and integrate several resistance gene cassettes. The results allow us to consider IntINeu a new functional integron integrase.