Investigating Single Molecule Adhesion by Atomic Force Spectroscopy

Atomic force spectroscopy is an ideal tool to study molecules at surfaces and interfaces. An experimental protocol to couple a large variety of single molecules covalently onto an AFM tip is presented. At the same time the AFM tip is passivated to prevent unspecific interactions between the tip and the substrate, which is a prerequisite to study single molecules attached to the AFM tip. Analyses to determine the adhesion force, the adhesion length, and the free energy of these molecules on solid surfaces and bio-interfaces are shortly presented and external references for further reading are provided. Example molecules are the poly(amino acid) polytyrosine, the graft polymer PI-g-PS and the phospholipid POPE (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine). These molecules are desorbed from different surfaces like CH₃-SAMs, hydrogen terminated diamond and supported lipid bilayers under various solvent conditions. Finally, the advantages of force spectroscopic single molecule experiments are discussed including means to decide if truly a single molecule has been studied in the experiment.     

Chemical force microscopy of cellulosic fibers

Atomic force microscopy with chemically modified cantilever tips (chemical force microscopy) was used to study the pull-off forces (adhesion forces) on cellulose model surfaces and bleached softwood kraft pulp fibers in aqueous media. It was found that for the –COOH terminated tips, the adhesion forces are dependent on pH, whereas for the –CH₃ and –OH terminated tips adhesion is not strongly affected by pH. Comparison between the cellulose model surfaces and cellulosic fibers under our experimental conditions reveal that surface roughness does not affect adhesion strongly. X-ray photoelectron spectroscopy (XPS) and Fourier Transformed Infrared (FTIR) spectroscopy reveal that both substrate surfaces have homogeneous chemical composition. The results show that chemical force microscopy can be used for the chemical characterization of cellulose surfaces at a nano-level.     

Transglutaminase mediated grafting of silk proteins onto wool fabrics leading to improved physical and mechanical properties

Transglutaminases have the ability to incorporate primary amines and to graft peptides (containing glutamine or lysine residues) into proteins. These properties enable transglutaminases to be used in the grafting of a range of compounds including peptides and/or proteins onto wool fibres, altering their functionality. In this paper we investigated the transglutaminase mediated grafting of silk proteins into wool and its effect on wool properties. A commercial hydrolysed silk preparation was compared with silk sericin. The silk sericin protein was labelled with a fluorescent probe which was used to demonstrate the efficiency of the TGase grafting of such proteins into wool fibres. The TGase mediated grafting of these proteins led to a significant effect on the properties of wool yarn and fabric, resulting in increased bursting strength, as well as reduced levels of felting shrinkage and improved fabric softness. Also observed was an accumulation of deposits on the surface of the treated wool fibres when monitored by SEM and alterations in the thermal behaviour of the modified fibres, in particular for mTGase/sericin treated fibres which, with the confocal studies, corroborate the physical changes observed on the treated wool fabric.     

Chitosan contribution on wool treatments with enzyme

In a previous research work, it was observed that the application of biopolymer chitosan (CHT) on wool fabrics before the enzymatic treatment promotes an increase of the weight loss. In order to deep on the role played by CHT, several experimental conditions have been selected according to a hybrid experimental design and different parameters, such as weight loss and shrink-resist properties, have been controlled. To enhance the CHT sorption on the wool fibre surface, wool was submitted previously to a water-vapour low-temperature plasma treatment. The weight loss results reveal that the enzyme effect increases by increasing the CHT concentration applied to untreated wool. However, CHT concentration does not have any influence when wool has been previously treated with plasma. It is deduced that the surface free energy of wool fibres plays an important role on the enzyme activity. Therefore, the results obtained reveal that the main contribution of CHT on hydrophobic surface of untreated wool fibres is to confer hydrophilicity to wool. Furthermore, CHT tends to coat the wool fibres by film formation reducing apparently the fibre damage promoted by enzyme treatment and also reducing the wool shrinkage.     

The influence of enzymatic treatment on wool fibre properties using PEG-modified proteases

The main contribution of the presented work was to introduce the use of proteases modified with the soluble polymer polyethylene glycol (PEG) in the bio-finishing process of wool fibres, to target enzyme action to the outer parts of wool fibres, i.e. to avoid the diffusion and consequent destroying of the inner parts of the wool fibre structure, in the case of native proteases using.

Different proteolytic enzymes from Bacillus lentus and Bacillus subtilis in native and PEG-modified forms were investigated and their influence on the modification of wool fibres morphology surface, chemical structure, as well as the hydrolysis of wool proteins, the physico-mechanical properties, and the sorption properties of 1:2 metal complex dye during dyeing were studied. SEM images of wool fibres confirmed smoother and cleaner fibre surfaces without fibre damages using PEG-modified proteases. Modified enzyme products have a benefit effect on the wool fibres felting behaviours (14%) in the case when PEG-modified B. lentus is used, without markedly fibre damage expressed by tensile strength and weight loss of the fibre. Meanwhile the dye exhaustion showed slower but comparable level of dye uptake at the end of the dyeing.     

Characterization of the surfaces generated by liposome binding to the modified dextran matrix of a surface plasmon resonance sensor chip

The dextran matrix of a surface plasmon resonance (SPR) sensor chip modified with hydrophobic residues (BIAcore sensor chip L1) provides an ideal substrate for liposome adsorption. Liposomes of different lipid compositions are captured on the sensor chips by inserting these residues into the liposome membrane, thereby generating stable lipid surfaces. To gain a more detailed understanding of these surfaces, and to prove whether the liposomes stay on the matrix as single particles or form a continuous lipid layer by liposome fusion, we have investigated these materials, using atomic force microscopy (AFM) and fluorescence microscopy. Force measurements with AFM probes functionalized with bovine serum albumin (BSA) were employed to recognize liposome adsorption. Analysis of the maximal adhesive force and adhesion energy reveals a stronger interaction between BSA and the dextran matrix compared to the lipid-covered surfaces. Images generated using BSA-coated AFM tips indicated a complete and homogeneous coverage of the surface by phospholipid. Single liposomes could not be detected even at lower lipid concentrations, indicating that the liposomes fuse and form a lipid bilayer on the dextran matrix. Experiments with fluorescently labeled liposomes concurred with the AFM studies. Surfaces incubated with liposomes loaded with TRITC-labeled dextran showed no fluorescence, indicating a complete release of the encapsulated dye. In contrast, surfaces incubated with liposomes containing a fluorescently labeled lipid showed fluorescence.     

Affinity capture of proteins from solution and their dissociation by contact printing

Biological experiments at the solid/liquid interface, in general, require surfaces with a thin layer of purified molecules, which often represent precious material. Here, we have devised a method to extract proteins with high selectivity from crude biological sample solutions and place them on a surface in a functional, arbitrary pattern. This method, called affinity-contact printing (alphaCP), uses a structured elastomer derivatized with ligands against the target molecules. After the target molecules have been captured, they are printed from the elastomer onto a variety of surfaces. The ligand remains on the stamp for reuse. In contrast with conventional affinity chromatography, here dissociation and release of captured molecules to the substrate are achieved mechanically. We demonstrate this technique by extracting the cell adhesion molecule neuron-glia cell adhesion molecule (NgCAM) from tissue homogenates and cell culture lysates and patterning affinity-purified NgCAM on polystyrene to stimulate the attachment of neuronal cells and guide axon outgrowth.     

Bio‐antifelting of wool based on mild methanolic potassium hydroxide pretreatment

Covalently bound lipids cover the wool surface and make enzymatic degradation of wool scales very difficult. In this paper, methanolic potassium hydroxide (MPH) pretreatment was used prior to enzymatic treatment of wool with protease, aiming at hydrolyzing the outmost lipids on the wool surface and promoting the subsequent proteolytic reaction. The efficacy of lipid removal from the fiber surface and the properties of the protease‐treated wool were evaluated. The results indicated that mild MPH pretreatment with 0.10 mol/L MPH for 10 min improved the wettability of the wool without adverse impacts on its mechanical properties. The wetting time and area shrinkage of the wool fabric reached 0.5 s and 5.6%, respectively, and the strength loss was within the acceptable range. Pretreatment with high concentrations of MPH for longer times led to significant damage to the wool fibers and caused heavy strength loss, without improving the antifelting properties after protease treatment. Thus, the combination of mild MPH and protease treatments endowed the wool with desirable properties in contrast to the treatment with protease alone.     

Study of the DNA/ethidium bromide interactions on mica surface by atomic force microscope: influence of the surface friction

The influence of mica surface on DNA/ethidium bromide interactions is investigated by atomic force microscopy (AFM). We describe the diffusion mechanism of a DNA molecule on a mica surface by using a simple analytical model. It appears that the DNA diffusion on a mica surface is limited by the surface friction due to the counterion correlations between the divalent counterions condensed on both mica and DNA surfaces. We also study the structural changes of linear DNA adsorbed on mica upon ethidium bromide binding by AFM. It turns out that linear DNA molecules adsorbed on a mica surface are unable to relieve the topological constraint upon ethidium bromide binding. In particular, strongly adsorbed molecules tend to be highly entangled, while loosely bound DNA molecules appear more extended with very few crossovers. Adsorbed DNA molecules cannot move freely on the surface because of the surface friction. Therefore, the topological constraint increases due to the ethidium bromide binding. Moreover, we show that ethidium bromide has a lower affinity for strongly bound molecules due to the topological constraint induced by the surface friction.     

Dynamics of adhesion molecule domains on neutrophil membranes: surfing the dynamic cell topography

Lateral organization and mobility of adhesion molecules play a significant role in determining the avidity with which cells can bind to target cells or surfaces. Recently, we have shown that the lateral mobility of the principal adhesion molecules on neutrophils is lower for rolling associated adhesion molecules (RAAMs: L-selectin and PSGL-1) than for β₂ integrins (LFA-1 and Mac-1). Here we report that all four adhesion molecules exhibit distinct punctate distributions that are mobile on the cell surface. Using uniform illumination image correlation microscopy, we measure the lateral mobility of these topologically distinct domains. For all four molecules, we find that diffusion coefficients calculated from domain mobility agree with measurements we made previously using fluorescence recovery after photobleaching. This agreement indicates that the transport of receptors on the surface of the resting neutrophil is dominated by the lateral movement of domains rather than individual molecules. The diffusion of pre-assembled integrin domains to zones of neutrophil/endothelial contact may provide a mechanism to facilitate high avidity adhesion during the earliest stages of firm arrest.     

Adhesive and frictional properties of tarsal attachment pads in two species of stick insects (Phasmatodea) with smooth and nubby euplantulae

In the present study, the tarsal attachment pads (euplantulae) of two stick insect species (Phasmatodea) were compared. While the euplantulae of Cuniculina impigra (syn. Medauroidea extradentata) are smooth, those of Carausius morosus bear small nubs on their surfaces. In order to characterize the adhesive and frictional properties of both types of euplantulae, adhesion and friction measurements on smooth (Ra=0.054 μm) and rough (Ra=1.399 μm) substrates were carried out. The smooth pads of C. impigra generated stronger adhesion on the smooth substrate than on the rough one. The adhesive forces of the structured pads of C. morosus did not differ between the two substrates. Friction experiments showed anisotropy for both species with higher values for proximal pulls than for distal pushes. In C. impigra, friction was stronger on the smooth than on the rough surface for both directions, whereas in C. morosus friction was stronger on the smooth surface only for pushes. This shows that smooth attachment pads are able to generate relatively stronger adhesion and friction on a flat smooth surface than on a rough one. In contrast, nubby pads have similar adhesion on both substrates, and also show no difference in friction in the pulling direction. This leads to the conclusion that smooth pads are specialized for rather smooth substrates, whereas nubby pads are better adapted to generate stronger forces on a broader range of surfaces.     

Cell Adhesion Molecule Distribution Relative to Neutrophil Surface Topography Assessed by TIRFM

The positioning of adhesion molecules relative to the microtopography of the cell surface has a significant influence on the molecule's availability to form adhesive contacts. Measurements of the ratio of fluorescence intensity per unit area in epi-fluorescence images versus total internal reflection fluorescence images provides a means to assess the relative accessibility for bond formation of different fluorescently labeled molecules in cells pressed against a flat substrate. Measurements of the four principal adhesion molecules on human neutrophils reveal that L-selectin has the highest ratio of total internal reflection fluorescence/epi intensity, and that P-selectin glycoprotein ligand-1 (PSGL-1) and the integrins α_Lβ₂ (LFA-1) and α_Mβ₂ (Mac-1) have ratios similar to each other but lower than for L-selectin. All of the ratios increased with increasing impingement, indicating an alteration of surface topography with increasing surface compression. These results are consistent with model predictions for molecules concentrated near the tips of microvilli in the case of L-selectin, and sequestered away from the microvillus tips in the case of LFA-1, Mac-1, and PSGL-1. The results confirm differences among adhesion molecules in their surface distribution and reveal how the availability of specific adhesion molecules is altered by mechanical compression of the surface in live cells.     

Molecular-dynamic simulation of phospholipid bilayers: Ion distribution at the surface of neutral and charged bilayer in the liquid crystalline state

The electric field and ion distribution at the surface of neutral and charged lipid bilayers (BeCl₂ and dipalmitoyl phosphatidylcholine/dipalmitoyl phosphatidylserine (DPPC/DPPS) + KCl) were studied with molecular dynamic (MD) methods. It is shown that the contributions of lipid molecules, water and ions to the electric potential compensate each other in the region of the diffuse double layer and decrease the potential value close to zero. It is also demonstrated that the ion distribution at the charged surface is determined not only by the electrostatic ion-medium interaction. The total energy of this interaction was compared with the potential of mean ion force. It was shown that cations and anions have a different effect on the state of water molecules at the surface. The order parameter of water in the system DPPC + BeCl₂ and the Clion distribution have the extremum at the distance of 10 α atoms of the phospholipid glycerol. This position was chosen as the “electrical” interface of the electrical double layer (EDL) for all lipid systems studied. The potential of mean force of counter ions in EDL allows us to obtain the value of potential at the lipid surface suitable for experimental test of the MD data. This surface potential and surface charge density was found from MD simulation different electrolyte concentrations and DPPS content of 20, 40 and 60% in the mixture with DPPC and was shown to be in a good agreement with the Gouy-Chapman-Stern model upon fitting parameters close to their experimental values.     

Modulation of adhesion,spreading and cytoskeleton organization of 3T3 fibroblasts by sulfonic groups present on polymer surfaces

The early phase of 3T3 fibroblast interaction with sulfonated styrene copolymer surfaces, of two sulfonic group densities and thus of differing wettability, was studied. The sulfonic groups present on copolymer surfaces affected the behaviour of cells, i.e. they stimulated cell adhesion, activated cell spreading and influenced cytoskeleton reorganization. The relative number of adhering cells correlated, while the number of spreading cells inversely correlated, with the surface density of sulfonic groups. Cell shape and the pattern of distribution of F-actin, alpha-actinin and vinculin in the interacting cells also depend on the surface density of sulfonic groups. On surfaces of high sulfonic group density, highly polarized cells were observed with F-actin bundles. On surfaces of low sulfonic group density, the cells spread with a square-like morphology with F-actin organized in stress fibres. In contrast, the cells spread poorly on nonsulfonated surfaces and cell adhesion was unaffected by surface wettability. The contribution of alpha(5)beta(1), alpha(4), and beta(5)integrins to the cell interaction with fibronectin (FN) and vitronectin (VN) adsorbed from serum-containing medium on polymer surfaces was examined. Our results suggest that surface sulfonic groups influence the conformation of FN and VN adsorbed on polymer surfaces and, in turn, determine the integrins that are involved in cell adhesion.     

The adhesive organ of the blowfly, Calliphora vomitoria: a functional approach (Diptera: Calliphoridae)

The external morphology of the terminal region of the fifth tarsal segment of the blowfly, Calliphora vomitoria (L.) has been studied using light and scanning electron microscopy (S.E.M.). The pulvilli, with their numerous tenent hairs of spatulate form projecting from the ventral surface, are responsible for adhesion to smooth surfaces. The two large claws are believed to be important in clinging to irregularities in surfaces. Two footplates, possibly sensory organs, lie in close association with the base of the large ventral seta, the empodium. Blowflies release a non-volatile lipid secretion on to the spatulate ends of the tenent hairs and this secretion is essential to the adhesion process on smooth surfaces. The force of adhesion has been measured for tethered blowflies on glass using both vertical and lateral pulls; lateral pulls gave much greater forces. It is concluded that surface tension of the lipid secretion under tenent hairs is sufficient to enable successful adhesion to smooth surfaces by blowflies.     

Kinetics of specific and nonspecific adhesion of red blood cells on glass.

Fixed spherical human red blood cells suspended in 17% sucrose were allowed to adhere on either clean glass surfaces or glass surfaces preincubated with antibodies specific to a certain blood group antigen. The adhesion experiments were performed in an impinging jet apparatus, in which the cells are subjected to stagnation point flow. The objective of this study was to compare the efficiencies of nonspecific and specific (antigen-antibody mediated) adhesion of red blood cells on glass surfaces. The efficiency was defined as the ratio of the experimental adhesion rate to that calculated based on numerical solutions of the mass transfer equation, taking into account hydrodynamic interactions as well as colloidal forces. The efficiency for nonspecific adhesion was nearly unity at flow rates lower than 85 microliter/s (corresponding to a wall shear rate, Gw, of 30 s-1 at a radial distance of 110 microns from the stagnation point). The values of efficiency dropped at higher flow rates, due to an increase in the tangential force. The critical deposition concentration is found to occur at 120-150 mM NaCl, which is consistent with the theoretically predicted values. At low salt concentrations, the experimental values are higher than the theoretical ones. Similar discrepancies have been found in many colloidal systems. Introducing steric repulsion by adsorbing a layer of albumin molecules on the glass completely prevents nonspecific adhesion at flow rates below 60 microliter/s (Gw congruent to 15 s-1). The efficiency of specific adhesion depends both on the concentration of antibody molecules on the surface and the flow rate. Normal red cells adhere more readily through antigen-antibody bonds than fixed cells. Fixed spherical cells have a higher adhesion efficiency than fixed biconcave ones.     

Microbial trans‐glutaminase enhances the physical and mechanical properties of depigmented wool

This study investigates the effects of enzymatic treatment with microbial trans‐glutaminase (m‐TGase) on the physical and mechanical properties of the depigmented wool yarns. Coarse pigmented wool yarns were treated with iron (II) followed by depigmentation with both oxidative and oxidative‐reductive chemicals. The depigmented wool yarns were then treated with m‐TGase to reduce the negative effects of the harsh chemicals. Diverse features of the wool yarns, including: tensile strength, elongation, color, diameter, moisture content, alkali solubility, and weight reduction, were measured before and after bleaching and enzymatic treatments. The treatment with the oxidative and reductive agents led to reduced tensile strength and elongation, and increased lightness, alkali solubility, and moisture content of the yarns. In contrast, the enzymatic treatment by m‐TGases cross‐linked the proteins of wool fibers via reaction between glutamine and lysine isodipeptide remediated the wool yarns. This improved the tensile strength and elongation and decreased the alkali solubility and moisture content. Fourier transform infrared spectroscopy (FTIR) was used to follow the chemical changes in wool fibres during depigmentation and enzymatic treatments.     

Surface-induced conformational and functional changes of bone morphogenetic protein-2 adsorbed onto single-walled carbon nanotubes

Efficient immobilization of bone morphogenetic protein-2 (BMP-2) onto matrix is of crucial importance in the development of BMP-2-based bone tissue scaffold/implant. This often ties with precise control of desirable protein conformation and retention of protein activity. Recently, great attentions were paid to the regulation of protein conformation by tailoring the nanoscale surface properties. In this contribution, with hydrophilic COOH- and hydrophobic CH₃-terminated single-walled carbon nanotubes (SWNTs-COOH and SWNTs-CH₃) as models, we investigated the nanoscale interface-induced changes of adsorption dynamics, conformation, and bioactivity of recombinant human BMP-2 (rhBMP-2). Our data showed that SWNTs-COOH and SWNTs-CH₃ bound rapidly to and induced unfolding of rhBMP-2 molecules, which promoted their interactions with corresponding receptors on cell surface and thus enhanced their bioactivities. In contrast, rhBMP-2 showed stronger affinity to the COOH-terminated surface than that terminated with CH₃ groups, while better enhanced bioactivity on the SWNTs-CH₃ surfaces. After released from SWNTs, the unfolded rhBMP-2 refolded and their activities from SWNTs-COOH and SWNTs-CH₃ were reduced to 90% and 70% of the native rhBMP-2, respectively. Based on these results obtained, a model of the binding characteristics of rhBMP-2 onto SWNTs with different chemistry is presented. This study demonstrates the possibility of simple tailor-made nanoscale chemical surfaces to modulate the binding, conformation and bioactivity of BMP-2, allowing fabrication of BMP-2-based bone tissue scaffolds with high osteoinductivity and low BMP-2 dosage.     

An ethoxylated alkyl phosphate (anionic surfactant) for the promotion of activities of proteases and its potential use in the enzymatic processing of wool

Pretreatments of wool fabrics with cationic, anionic or non-ionic surfactants were investigated to reduce surface tension and improve the wettability of the fibres in order to promote protease activity on the fibres in subsequent processes. Results showed that an ethoxylated alkyl phosphate (specific anionic surfactant) as well as the widely used non-ionic surfactant was compatible with proteases in the enzymatic treatment of wool. There is therefore a potential for using specific anionic surfactants to achieve efficient enzymatic scouring processes.     

In Vivo Availability of Pro-Resolving Lipid Mediators in Oxazolone Induced Dermal Inflammation in the Mouse

The activation and infiltration of polymorphonuclear neutrophils (PMN) are critical key steps in inflammation. PMN-mediated inflammation is limited by anti-inflammatory and pro-resolving mechanisms, including specialized pro-resolving lipid mediators (SPM). We examined the effects of 15-epi-LXA₄ on inflammation and the biosynthesis of pro-inflammatory mediators, such as prostaglandins, leukotriene B₄ and various hydroxyeicosatetraenoic acids and SPM, in an oxazolone (OXA)-induced hypersensitivity model for dermal inflammation. 15-epi-LXA₄ (100 μM, 5 μL subcutaneously injected) significantly (P < 0.05) reduced inflammation in skin, 24 hours after the OXA challenge, as compared to skin treated with vehicle. No significant influence on the biosynthesis of prostaglandins or leukotriene B₄ was observed, whereas the level of 15S-hydroxy-eicosatetraenoic acid was significantly (P < 0.05) lower in the skin areas treated with 15-epi-LXA₄. In spite of the use of a fully validated analytical procedure, no SPM were detected in the biological samples. To investigate the reason for the lack of analytical signal, we tried to mimic the production of SPM (lipoxins, resolvins, maresin and protectin) by injecting them subcutaneously into the skin of mice and studying the in vivo availability and distribution of the compounds. All analytes showed very little lateral distribution in skin tissue and their levels were markedly decreased (> 95%) 2 hours after injection. However, docosahexaenoic acid derivatives were biologically more stable than SPM derived from arachidonic acid or eicosapentaenoic acid.