Inhibition of beta-lactamase of Bacillus licheniformis 749/C by compound PS-5, a new beta-lactam antibiotic.

By use of a new computer-assisted u.v.-spectrophotometric assay method, the kinetic parameters of the reaction catalysed by Bacillus licheniformis 749/C beta-lactamase were re-examined and the mode of inhibition of the enzyme by compound PS-5, a novel beta-lactam antibiotic, was studied with benzylpenicillin as substrate. (1) The fundamental assay conditions for the determination of Km and V were examined in detail with benzylpenicillin as substrate. In 0.1 M-sodium/potassium phosphate buffer, pH 6.8, at 30 degrees C, initial substrate concentrations of benzylpenicillin above 0.7 mM were very likely to lead to substrate inhibition. The Km value of the enzyme for benzylpenicillin at initial concentrations from 1.96 to 0.07 mM was calculated to be 97-108 microM. (2) The Km values of the enzyme for 6-aminopenicillanic acid, ampicillin and cephaloridine were found to be 25, 154-161 and 144-161 microM respectively. (3) Compound PS-5 was virtually unattacked by Bacillus licheniformis 749/C beta-lactamase. (4) The activity of the enzyme was diminished by compound PS-5, to extents depending on the duration of incubation and the concentration of the inhibitor. The rate of inactivation of the enzyme by compound PS-5 followed first-order kinetics. (5) In an Appendix, a new computer-assisted u.v.-spectrophotometric enzyme assay method, in which a single reaction progress curve of time-absorbance was analysed by the integrated Michaelis-Menten equation, was devised for the accurate and precise determination of the kinetic constants of beta-lactamase. For conversion of absorbance readings into molar substrate concentrations, the initial or final absorbance reading that was independent of the reaction time was used as the basis of calculation. In calculation of Km and V three systematic methods of data combination were employed for finer analysis of the reaction progress curve. A list of the computer program named YF6TAIM is obtainable from the author on request or as Supplementary Publication SUP 50100 (12 pages) from the British Library Lending Division, Boston Spa, Wetherby, West Yorkshire LS23 7BQ, U.K., on the terms indicated in Biochem. J. (1978) 169, 5.     

Cryoenzymology of Bacillus cereus beta-lactamase II

The effects of cryosolvents and subzero temperatures on the metalloenzyme beta-lactamase II from Bacillus cereus have been investigated. Preliminary experiments led to the selection of suitable systems for the study of beta-lactamase II catalysis at low temperatures, namely, cobalt(II) beta-lactamase II hydrolysis of benzylpenicillin in 60% (v/v) ethylene glycol and zinc beta-lactamase II hydrolysis of the chromophoric cephalosporin nitrocefin in 60% (v/v) methanol. Progress curves for the hydrolysis of benzylpenicillin by cobalt beta-lactamase II in 60% (v/v) ethylene glycol at temperatures below -30 degrees C consisted of a transient followed by a steady-state phase. The amplitude of the transient implied a burst whose magnitude was greater than the concentration of enzyme, and the proposed mechanism comprises a branched pathway. The kinetics for the simplest variants of such pathways have been worked out, and the rate constants (and activation parameters) for the individual steps have been determined. The spectrum of the enzyme changed during turnover: when benzylpenicillin was added to cobalt beta-lactamase II, there was a large increase in the cysteine-cobalt(II) charge-transfer absorbance at 333 nm. This increase occurred within the time of mixing, even at -50 degrees C. The subsequent decrease in A333 was characterized by a rate constant that had the same value as the "branching" rate constant of the branched-pathway mechanism. This step is believed to be a change in conformation of the enzyme-substrate complex. Single-turnover experiments utilized the change in A333, and the results were consistent with pre-steady-state and steady-state experiments. When a single-turnover experiment at -48 degrees C was quenched with acid, the low molecular weight component of the intermediate was shown to be substrate. The mechanism advanced for the hydrolysis of benzylpenicillin by cobalt beta-lactamase II involves two noncovalent enzyme-substrate complexes that have been characterized by their electronic absorption spectra. When manganese beta-lactamase II was used, the same features (implying a branched pathway) were evident; these experiments were carried out at ordinary temperatures and did not utilize a cryosolvent. The hydrolysis of nitrocefin by zinc beta-lactamase II has been studied concurrently in 60% (v/v) methanol. Progress curves were triphasic. There were two transients preceding the linear steady-state phase. The stoichiometry of the burst again implied a branched pathway.(ABSTRACT TRUNCATED AT 400 WORDS)     

beta-lactamase from Streptomyces cacaoi. Purification and properties

A beta-lactamase was purified to an apparently homogeneous state from Streptomyces cacaoi. The molecular weight calculated from the mobility in sodium dodecyl sulfate polyacrylamide gel electrophoresis was 34,000. pI was 4.7 and the optimal pH was 6.5. The optimum temperature was found to be between 40 degrees C and 45 degrees C, but the enzyme lost activity above 50 degrees C. N-Bromosuccinimide was the strongest inhibitor among the reagents tested, followed by iodine. p-Chloromercuribenzoate showed a weak inhibitory effect. Diisopropylfluorophosphate and sodium chloride did not show any inhibitory effect on the enzyme. The beta-lactamase catalyzed the hydrolysis of methicillin and cloxacillin at two-thirds to one-third the rate of benzylpenicillin. On the other hand, the enzyme hydrolyzed cephalosporins and 7-methoxycephalosporin only slowly. With benzylpenicillin as a substrate, the Km increased sharply with decreasing pH and the pK alpha estimated from the Km versus pH curve was 6.5 to 7.0. In contrast, with cloxacillin as a substrate, the Km showed a minimum at pH 7.5. The Vmax changed with pH in a bell-shaped curve in the case of benzylpenicillin, but the Vmax for cloxacillin changed only within a small range. In addition, the ratio of the hydrolysis rate of benzylpenicillin and cloxacillin at 30 degrees C and 20 degrees C (V30 degrees/V20 degrees) was found to be 1.23 and 1.55, respectively. These results indicate that the S. cacaoi beta-lactamase behaves differently toward benzylpenicillin and cloxacillin, although both are penicillins. S. cacaoi seems to release beta-lactamase into the culture medium soon after its biosynthesis without retaining it in the membrane and the soluble fraction. The possible relationships between beta-lactamases from Streptomyces and those from pathogenic bacteria are discussed.     

The kinetic properties of the carboxy terminal domain of the Bacillus licheniformis 749/I BlaR penicillin-receptor shed a new light on the derepression of beta-lactamase synthesis

To study the properties of the BlaR penicillin-receptor involved in the induction of the Bacillus licheniformisbeta-lactamase, the water-soluble carboxy terminal domain of the protein (BlaR-CTD) was overproduced in the periplasm of Escherichia coli JM105 and purified to protein homogeneity. Its interactions with various beta-lactam antibiotics were studied. The second-order acylation rate constants k2/K' ranged from 0.0017 to more than 1 micro M-1s-1 and the deacylation rate constants were lower than 4 x 10-5 s-1. These values imply a rapid to very rapid formation of a stable acylated adduct. BlaR-CTD is thus one of the most sensitive penicillin-binding proteins presently described. In the light of these results, the kinetics of beta-lactamase induction in Bacillus licheniformis were re-examined. When starting with a rather high cell density, a good beta-lactamase substrate such as benzylpenicillin is too sensitive to beta-lactamase-mediated hydrolysis to allow full induction. By contrast, a poor beta-lactamase substrate (7-aminocephalosporanic acid) can fully derepress beta-lactamase expression under conditions where interference of the antibiotic with cell growth is observed. These results suggest that acylation of the penicillin receptor is a necessary, but not sufficient, condition for full induction.     

Cephalosporinase and penicillinase activities of a β-lactamase from Pseudomonas pyocyanea

1. Pseudomonas pyocyanea N.C.T.C. 8203 produces a beta-lactamase that is inducible by high concentrations of benzylpenicillin or cephalosporin C. Methicillin appeared to be a relatively poor inducer, but this could be attributed in part to its ability to mask the enzyme produced. Much of the enzyme is normally cell-bound. 2. No evidence was obtained that the crude enzyme preparation consisted of more than one beta-lactamase and the preparation appeared to contain no significant amount of benzylpenicillin amidase or of an acetyl esterase. 3. The maximum rate of hydrolysis of cephalosporin C and several other derivatives of 7-aminocephalosporanic acid by the crude enzyme was more than five times that of benzylpenicillin. Methicillin, cloxacillin, 6-aminopenicillanic acid and 7-aminocephalosporanic acid were resistant to hydrolysis, and methicillin and cloxacillin were powerful competitive inhibitors of the action of the enzyme on easily hydrolysable substrates. 4. Cephalosporin C, cephalothin and cephaloridine yielded 2 equiv. of acid/mole on enzymic hydrolysis, and deacetylcephalorsporin C yielded 1 equiv./mole. Evidence was obtained that the opening of the beta-lactam ring of cephalosporin C and cephalothin is accompanied by the spontaneous expulsion of an acetoxy group and that of cephaloridine by the expulsion of pyridine. 5. A marked decrease in the minimum inhibitory concentration of benzylpenicillin and several hydrolysable derivatives of 7-aminocephalosporanic acid was observed when the size of the inoculum was decreased. This suggested that the production of a beta-lactamase contributed to the factors responsible for the very high resistance of Ps. pyocyanea to these substances. It was therefore concluded that the latter might show synergism with the enzyme inhibitors, methicillin and cloxacillin, against this organism.     

The pH-dependence of class B and class C beta-lactamases.

The classification by structure allots beta-lactamases to (at present) three classes, A, B and C. The pH-dependence of the kinetic parameters for class B and class C have been determined. They differ from each other and from class A beta-lactamases. The class B enzyme was beta-lactamase II from Bacillus cereus 569/H/9. The plots of kcat against pH for the hydrolysis of benzylpenicillin by Zn(II)-requiring beta-lactamase II and Co(II)-requiring beta-lactamase II were not symmetrical, but those of kcat/Km were. A similar feature was observed for the hydrolysis of both benzylpenicillin and cephalosporin C by a class C beta-lactamase from Pseudomonas aeruginosa. The results have been interpreted by a scheme in which two ionic forms of an intermediate can give product, but do so at differing rates.     

Isolation and properties of beta-lactamase of the cephalosporinase type from cells of Enterobacter aerogenes 6803

beta-Lastamase with the molecular weight of 32500 was isolated from the cells of clinical strain 6803 of Enterobacter aerogenes and purified. By the substrate profile determined microiodometrically beta-lactamase was classified as belonging to the cephalosporinase type. The activity of the electrophoretically homogenous enzyme was equal to 430 microM a minute per mg protein with respect to benzylpenicillin. The Km for benzylpenicillin, dicloxacillin, cephaloridin and cephalothin was 6.5410(-5), 3 X 10(-4), 2.1 X 10(-5) and 5.7 X 10(-5) M, respectively. The isoelectric point of the enzyme equal to 5.45 was estimated with the method of preparative isoelectrofocusing. The presence of the serine residue or residues was shown with the use of selective reagents applied to the functionally important groups. With the method of circular dichroism the ratio of alpha- and beta-structures in the enzyme molecule was determined, the slow hydrolysis of cephazolin was demonstrated and the values of Km and Kcat for this process were estimated.     

Purification and characterization of a beta-lactamase from Haemophilus ducreyi in Escherichia coli

A pCb plasmid encoding a beta-lactamase from Haemophilus ducreyi was transferred to Escherichia coli, purified, and characterized. The beta-lactamase could be isolated from a culture filtrate and further purified by ammonium sulfate and chelating Sepharose fast flow loaded with Zn(2+). The purified enzyme resulted in a major band at approximately 30-kDa on SDS-PAGE and its pI was determined to be 5.4. The beta-lactamase could hydrolyze both penicillin antibiotics including ampicillin, benzylpenicillin, and carbenicillin as well as cephalosporin antibiotics including nitrocefin, cephalothin, cephaloridine, and cefoperazone. However, benzylpenicillin was the best substrate. The enzyme activity was inhibited by clavulanic acid but not by boric acid, cefotaxime, ethylenediaminetetraacetic acid, or phenylmethylsulfonyl fluoride. The sequence of the beta-lactamase gene was also determined. It confirmed that the enzyme belonged to a class A beta-lactamase which had 99% identity to the ampicillin resistance transposon Tn3 of pBR322. Two nucleotides were different between the E. coli (Tn3) and H. ducreyi (pCb) genes that affected the amino-acid sequence. The valine at position 82 (ABL 84) was changed to isoleucine and the alanine at position 182 (ABL 184) was changed to valine. Genetic homogeneity among beta-lactamases is remarkable. Amino acid sequencing of some beta-lactamases has shown that substitution of only a few amino acids in the bla gene leads to high-level resistance against specific cephalosporins.     

Site-saturation mutagenesis of Tyr-105 reveals its importance in substrate stabilization and discrimination in TEM-1 beta-lactamase

The conserved Class A beta-lactamase active site residue Tyr-105 was substituted by saturation mutagenesis in TEM-1 beta-lactamase from Escherichia coli in order to clarify its role in enzyme activity and in substrate stabilization and discrimination. Minimum inhibitory concentrations were calculated for E. coli cells harboring each Y105X mutant in the presence of various penicillin and cephalosporin antibiotics. We found that only aromatic residues as well as asparagine replacements conferred high in vivo survival rates for all substrates tested. At position 105, the small residues alanine and glycine provide weak substrate discrimination as evidenced by the difference in benzylpenicillin hydrolysis relative to cephalothin, two typical penicillin and cephalosporin antibiotics. Kinetic analyses of mutants of interest revealed that the Y105X replacements have a greater effect on K(m) than k(cat), highlighting the importance of Tyr-105 in substrate recognition. Finally, by performing a short molecular dynamics study on a restricted set of Y105X mutants of TEM-1, we found that the strong aromatic bias observed at position 105 in Class A beta-lactamases is primarily defined by a structural requirement, selecting planar residues that form a stabilizing wall to the active site. The adopted conformation of residue 105 prevents detrimental steric interactions with the substrate molecule in the active site cavity and provides a rationalization for the strong aromatic bias found in nature at this position among Class A beta-lactamases.     

Peptidoglycan synthesis in Bacillus licheniformis. The inhibition of cross-linking by benzylpenicillin and cephaloridine in vivo accompanied by the formation of soluble peptidoglycan.

The synthesis of peptidoglycan by an autolysin-deficient beta-lactamase-negative mutant of Bacillus licheniformis was studied in vivo in the absence of protein synthesis. Benzylpenicillin and cephaloridine inhibited the formation of cross-bridges between newly synthesized peptidoglycan and the pre-existing cell wall. This inhibition, detected by measurement of the incorporation of N-acetyl[14C]glucosamine into the glycan fraction of the cell wall, was reversed by treatment with beta-lactamase and washing. Inhibition of D-alanine carboxypeptidase by benzylpenicillin was not reversed under similar conditions. Cells in which the initial penicillin inhibition of transpeptidation had been reversed showed an increased sensitivity to a subsequent addition of the antibiotic. Chemical analysis of peptidoglycan synthesized after reversal of penicillin inhibition revealed the presence of excess of alanine resulting from the continued inhibition of D-alanine carboxypeptidase. When the cell walls were digested to yield muropeptides so that the degree of cross-linking could be measured, the product after reversal of penicillin inhibition contained fewer cross-links than did the control preparation. Cultures treated with benzylpenicillin and cephaloridine continued to synthesize uncross-linked soluble peptidoglycan, which accumulated in the medium. This soluble material was all newly synthesized peptidoglycan and did not result from autolysis of the bacteria. The average chain lengths of the glycan synthesized in vivo and released as soluble peptidoglycan in the presence of both benzylpenicillin and cephaloridine were similar to those found previously in this organism.     

Purification and characterization of the penicillin-binding protein that is the lethal target of penicillin in Bacillus megaterium and Bacillus licheniformis. Protein exchange and complex stability.

The penicillin-binding protein that is thought to be the lethal target of penicillin in Bacillus megaterium (protein 1) has been purified to greater than 95% homogeneity. The membrane-bound penicillin-binding proteins were solubilized with a non-ionic detergent and partially separated from each other by ion-exchange chromatography on DEAE-Sepharose CL-6B. Protein 1 was subsequently purified by covalent affinity chromatography on ampicillin-affinose. Bacillus licheniformis contains an equivalent penicillin-binding protein (protein 1) that can be more readily purified to virtual homogeneity in a one-step procedure. It was separated from the other penicillin-binding proteins by utilizing the observation that in this organism, this particular protein is the only one whose covalent complex with benzylpenicillin subsequently breaks down. Membranes were treated with saturating concentrations of benzylpenicillin followed by the removal of free penicillin and further incubation to allow the complex between benzylpenicillin and protein 1 to break down. The penicillin-binding proteins were then solubilized and applied to a column of ampicillin-affinose to which only protein 1 was bound as the other penicillin-binding proteins still had benzylpenicillin bound to them. Pure protein 1 was eluted from the affinity resin with hydroxylamine. The interaction of benzylpenicillin with purified protein 1 has been studied by separating unbound antibiotic from the benzylpenicillin . protein complex by paper electrophoresis. Benzylpenicillin reacts with the protein rapidly to form a covalent complex and the fully saturated complex has a molar ratio of bound [14C] benzylpenicillin: protein of 0.7:1. The complex breaks down, obeying first-order kinetics, with a half-life of 16 min at 35 degrees C, a value identical to that obtained with the membrane-bound protein. The concentration of benzylpenicillin that results in the formation of 50% of the maximum amount of benzylpenicillin . protein complex is that at which the molar amount of benzylpenicillin present is equal to 50% of the molar amount of penicillin-binding protein, rather than being a measure of any of the kinetic parameters of the binding reaction. This observation may be significant in the interpretation of previous results where the amounts of penicillins needed to kill cells or to inhibit penicillin-sensitive reactions have been expressed as concentrations. The possible importance of the breakdown of beta-lactam . protein complexes in the clinical use of these antibiotics is discussed.     

Susceptibility of Rhodobacter sphaeroides to beta-lactam antibiotics: isolation and characterization of a periplasmic beta-lactamase (cephalosporinase).

Thirteen strains of the gram-negative, facultative phototrophic bacterium Rhodobacter sphaeroides were examined fro susceptibility to beta-lactam antibiotics. All strains were sensitive to the semisynthetic penicillins ampicillin, carbenicillin, oxacillin, cloxacillin, and methicillin, but 10 of the 13 strains were resistant to penicillin G, as well as a number of cephalosporins, such as cephalothin, cephapirin, and cephalosporin C. A beta-lactamase (EC 3.5.2.6) with strong cephalosporinase activity was detected in all of the resistant strains of R. sphaeroides. With strain Y-1 as a model, it was shown that the beta-lactamase was inducible by penicillin G, cephalosporin C, cephalothin, and to some minor extent, cephapirin. The beta-lactamase was located in the periplasmic space, from which it could be extracted by osmotic shock disruption. By using this fraction, the beta-lactamase was purified 34-fold to homogeneity by steps involving batch adsorption to and elution from DEAE-Sephadex A50, chromatography on Q-Sepharose, and preparative polyacrylamide gel electrophoresis. The molecular masses of the native and denatured enzymes were determined to be 38.5 kilodaltons by gel filtration and 40.5 kilodaltons by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, respectively, indicating a monomeric structure. The isoelectric point was estimated to be at pH 4.3. In Tris hydrochloride buffer, optimum enzyme activity was measured at pH 8.5. The beta-lactamase showed high activity in the presence of the substrates cephalothin, cephapirin, cephalosporin C, and penicillin G, for which the apparent Km values were 144, 100, 65, and 110 microM, respectively. Cephalexin, cepharidine, and cephaloridine were poor substrates. The beta-lactamase was strongly inhibited by cloxacillin and oxacillin but only slightly inhibited by phenylmethylsulfonyl fluoride or thiol reagents such as iodoacetate and p-chloromercuribenzoate.     

Kinetic parameters from progress curves of competing substrates. Application to beta-lactamases.

The use of two substrates, one of them a reporter substrate, is often convenient. The time course of an enzymic reaction with competing substrates is given explicitly in the present paper. Kinetic parameters can be readily obtained. The method is applied to the hydrolysis of benzylpenicillin, with cephalosporin C as the reporter substrate, catalysed by a Pseudomonas beta-lactamase.     

Structure-based design guides the improved efficacy of deacylation transition state analogue inhibitors of TEM-1 beta-Lactamase(,)

Transition state analogue boronic acid inhibitors mimicking the structures and interactions of good penicillin substrates for the TEM-1 beta-lactamase of Escherchia coli were designed using graphic analyses based on the enzyme's 1.7 A crystallographic structure. The synthesis of two of these transition state analogues, (1R)-1-phenylacetamido-2-(3-carboxyphenyl)ethylboronic acid (1) and (1R)-1-acetamido-2-(3-carboxy-2-hydroxyphenyl)ethylboronic acid (2), is reported. Kinetic measurements show that, as designed, compounds 1 and 2 are highly effective deacylation transition state analogue inhibitors of TEM-1 beta-lactamase, with inhibition constants of 5.9 and 13 nM, respectively. These values identify them as among the most potent competitive inhibitors yet reported for a beta-lactamase. The best inhibitor of the current series was (1R)-1-phenylacetamido-2-(3-carboxyphenyl)ethylboronic acid (1, K(I) = 5.9 nM), which resembles most closely the best known substrate of TEM-1, benzylpenicillin (penicillin G). The high-resolution crystallographic structures of these two inhibitors covalently bound to TEM-1 are also described. In addition to verifying the design features, these two structures show interesting and unanticipated changes in the active site area, including strong hydrogen bond formation, water displacement, and rearrangement of side chains. The structures provide new insights into the further design of this potent class of beta-lactamase inhibitors.     

Fragments of pro-peptide activate mature penicillin amidase of Alcaligenes faecalis.

Penicillin amidase from Alcaligenes faecalis is a recently identified N-terminal nucleophile hydrolase, which possesses the highest specificity constant (kcat/Km) for the hydrolysis of benzylpenicillin compared with penicillin amidases from other sources. Similar to the Escherichia coli penicillin amidase, the A. faecalis penicillin amidase is maturated in vivo from an inactive precursor into the catalytically active enzyme, containing one tightly bound Ca2+ ion, via a complex post-translational autocatalytic processing with a multi-step excision of a small internal pro-peptide. The function of the pro-region is so far unknown. In vitro addition of chemically synthesized fragments of the pro-peptide to purified mature A. faecalis penicillin amidase increased its specific activity up to 2.3-fold. Mutations were used to block various steps in the proteolytic processing of the pro-peptide to obtain stable mutants with covalently attached fragments of the pro-region to their A-chains. These extensions of the A-chain raised the activity up to 2.3-fold and increased the specificity constants for benzylpenicillin hydrolysis mainly by an increase of the turnover number (kcat).     

Permeability to cefsulodin of the outer membrane of Pseudomonas aeruginosa and discrimination between beta-lactamase-mediated trapping and hydrolysis as mechanisms of resistance

A pair of strains of Pseudomonas aeruginosa (3-Pre: cefsulodin-sensitive, inducible beta-lactamase; and 3-Post: cefsulodin-resistant, elevated beta-lactamase, derived from 3-Pre by subculture in the presence of cefsulodin) were taken as representative of the class of bacteria resistant to third-generation cephalosporins due to elevated synthesis of the normally inducible, chromosomally encoded beta-lactamase. These two strains were used to differentiate between 'trapping' and 'hydrolytic' mechanisms of cefsulodin resistance by (a) measuring the outer-membrane permeabilities to cefsulodin, (b) measuring the kinetics of cefsulodin hydrolysis and the stoichiometry of cefsulodin trapping by the periplasmic beta-lactamase, and (c) comparing the predictions of the trapping and hydrolysis hypotheses with the minimum inhibitory concentrations (MIC) of cefsulodin. The MIC of cefsulodin for strains 3-Pre and 3-Post were 2.35 microM (1.25 micrograms ml-1) and 37.6 microM (20.0 micrograms ml-1) respectively. The permeability parameter for cefsulodin of the outer membrane of the resistant strain was 0.0034 cm3 min-1 mg dry mass-1, so the flux of cefsulodin across its outer membrane at the MIC was calculated to be 0.120 nmol min-1 mg dry mass-1. Hydrolysis of cefsulodin by the beta-lactamase in the periplasm occurred at a rate of 0.118 nmol min-1 mg dry mass-1 which can thus account for resistance by matching the above rate of inflow. Trapping by the beta-lactamase, even with a 1:1 stoichiometry, would require the enzyme to be synthesized at 5.0 micrograms protein min-1 mg dry mass-1 or about 40% of the dry mass/generation. We conclude that hydrolysis, but not trapping, adequately explains the resistance to cefsulodin in P. aeruginosa 3-Post. A similar calculation for latamoxef resistance, using data taken from the literature, led to the same conclusion.     

Kinetics and mechanism of the serine beta-lactamase catalyzed hydrolysis of depsipeptides

Steady-state kinetic parameters have been determined for the hydrolysis of a series of acyclic depsipeptides (ester analogues of acyl-D-alanyl-D-alanine peptides) catalyzed by representative class C (Enterobacter cloacae P99) and class A (Bacillus cereus I, TEM-2, and Staphylococcus aureus PC1) beta-lactamases. The best of these substrates, and the one most used in this work, was m-[[(phenylacetyl)-glycyl]oxy]benzoic acid, whose rates of cleavage could be followed spectrophotometrically. The P99 enzyme also catalyzed the methanolysis of these substrates in aqueous methanol solutions. Quantitative evaluation of the effects of methanol on the kinetics of the competing hydrolysis and methanolysis reactions, and on the product distribution, supports a reaction mechanism involving an acyl-enzyme intermediate whose formation is rate-determining under conditions of substrate saturation. Consideration of the variation of these kinetic parameters with the structure of the depsipeptides and comparison with the analogous parameters for bicyclic beta-lactam substrates suggest that a variety of substrate binding modes exist on this enzyme. The class A enzymes, B. cereus beta-lactamase I and the TEM-2 beta-lactamase, catalyze depsipeptide and benzylpenicillin hydrolyses but not methanolysis. The acyl-enzyme derived from both types of substrate is thus shielded from external nucleophiles; the shielding is therefore not an effect, direct or indirect, of the thiazolidinyl group in the penicilloyl-enzyme. The class A beta-lactamase of the PC1 plasmid of S. aureus is distinctly different from the above two representatives of that class, in that it does catalyze methanolysis of depsipeptides (but not of benzylpenicillin). The methanolysis kinetics suggest that deacylation is rate-determining at saturation, a conclusion supported by the demonstration of an intermediate during the hydrolysis of m-[[(phenylacetyl)glycyl]oxy]benzoate, subsequent to leaving-group departure. The beta-lactamases have thus been shown to catalyze the hydrolysis of specific depsipeptides with comparable facility to that demonstrated by D-alanyl-D-alanine carboxypeptidase/transpeptidases. The former enzymes, however, differ in being unable to cleave the analogous peptides.     

An inducible β-lactamase in a strain ofEscherichia coli

The production of beta-lactamase (penicillin/cephalosporin beta-lactam amidohydrolase, E.C.3.5.2.6) was found to be inducible in a clinically isolated strain of Escherichia coli. This is the first report of an inducible beta-lactamase in E. coli. The optimal concentration of inducer was 400 mug/ml of ml of benzylpenicillin, or 800 mug/ml of 6-aminopenicillanic acid. About fiftyfold induction was achieved. Maximum induction took ninety minutes from the time of adding the inducer. Induction was abolished by the presence of chloramphenicol(10 mug/ml). The enzyme has a molecular wieght of 23,000, and is inhibited by rho-chloromercuribenzoate and by iodine. It is active against a wide range of substrates, including cephaloridine and cloxacillin.     

The acyl-enzyme mechanism of beta-lactamase action. The evidence for class C Beta-lactamases

Methanol or ethanol can replace water in the action of certain chromosomal beta-lactamases on benzylpenicillin: the products are alpha-methyl or alpha-ethyl benzylpenicilloate. The beta-lactamases were from a mutant of Pseudomonas aeruginosa 18S that produces the enzyme constitutively [Flett, Curtis & Richmond (1976) J. Bacteriol. 127, 1585-1586; Berks, Redhead & Abraham (1982) J. Gen. Microbiol. 128, 155-159] and from Escherichia coli K12 (the ampC beta-lactamase) [Lindstr?m, Boman & Steele (1970) J. Bacteriol. 101, 218-231]. The variation of the rates of alcoholysis and hydrolysis with concentration of alcohol show that the rate-determining step is breakdown of an intermediate. This intermediate is likely to be the acyl-enzyme. The esters, alpha-methyl or alpha-ethyl benzylpenicilloate, are themselves substrates for the Pseudomonas beta-lactamase, benzylpenicilloic acid being formed. Thus this beta-lactamase can be an esterase. The kinetics for the hydrolysis of cloxacillin by the Pseudomonas beta-lactamase are consistent with the acyl-enzyme, formed by acylation of serine-80, being an intermediate in the overall hydrolysis.     

Conversion of benzylpenicillin to 6-aminopenicillanic acid in a batch reactor and continuous feed stirred tank reactor using immobilized penicillin amidase

A rate equation has been derived to describe the hydrolysis of benzylpenicillin to 6-aminopenicillanic acid by penicillin amidase. The integrated from of the rate equation has been shown to predict satisfactorily the progress of the reaction in a batch reactor using either soluble or immobilized penicillin amidase. The rate equation was also used to predict the performance of a continuous feed stirred tank reactor containing immobilized enzyme. There was good agreement with experimental measurements.