Dental microwear and diets of African early Homo

Conventional wisdom ties the origin and early evolution of the genus Homo to environmental changes that occurred near the end of the Pliocene. The basic idea is that changing habitats led to new diets emphasizing savanna resources, such as herd mammals or underground storage organs. Fossil teeth provide the most direct evidence available for evaluating this theory. In this paper, we present a comprehensive study of dental microwear in Plio-Pleistocene Homo from Africa. We examined all available cheek teeth from Ethiopia, Kenya, Tanzania, Malawi, and South Africa and found 18 that preserved antemortem microwear. Microwear features were measured and compared for these specimens and a baseline series of five extant primate species (Cebus apella, Gorilla gorilla, Lophocebus albigena, Pan troglodytes, and Papio ursinus) and two protohistoric human foraging groups (Aleut and Arikara) with documented differences in diet and subsistence strategies. Results confirmed that dental microwear reflects diet, such that hard-object specialists tend to have more large microwear pits, whereas tough food eaters usually have more striations and smaller microwear features. Early Homo specimens clustered with baseline groups that do not prefer fracture resistant foods. Still, Homo erectus and individuals from Swartkrans Member 1 had more small pits than Homo habilis and specimens from Sterkfontein Member 5C. These results suggest that none of the early Homo groups specialized on very hard or tough foods, but that H. erectus and Swartkrans Member 1 individuals ate, at least occasionally, more brittle or tough items than other fossil hominins studied.     

Molar microwear textures and the diets of Australopithecus anamensis and Australopithecus afarensis

Many researchers have suggested that Australopithecus anamensis and Australopithecus afarensis were among the earliest hominins to have diets that included hard, brittle items. Here we examine dental microwear textures of these hominins for evidence of this. The molars of three Au. anamensis and 19 Au. afarensis specimens examined preserve unobscured antemortem microwear. Microwear textures of these individuals closely resemble those of Paranthropus boisei, having lower complexity values than Australopithecus africanus and especially Paranthropus robustus. The microwear texture complexity values for Au. anamensis and Au. afarensis are similar to those of the grass-eating Theropithecus gelada and folivorous Alouatta palliata and Trachypithecus cristatus. This implies that these Au. anamensis and Au. afarensis individuals did not have diets dominated by hard, brittle foods shortly before their deaths. On the other hand, microwear texture anisotropy values for these taxa are lower on average than those of Theropithecus, Alouatta or Trachypithecus. This suggests that the fossil taxa did not have diets dominated by tough foods either, or if they did that directions of tooth–tooth movement were less constrained than in higher cusped and sharper crested extant primate grass eaters and folivores.     

Dental microwear variability on buccal tooth enamel surfaces of extant Catarrhini and the Miocene fossil Dryopithecus laietanus (Hominoidea)

Analyses of buccal tooth microwear have been used to trace dietary habits of modern hunter-gatherer populations. In these populations, the average density and length of striations on the buccal surfaces of teeth are significantly cor-related with the abrasive potential of food items consumed. In non-human pri-mates, tooth microwear patterns on both occlusal and buccal wear facets have been thoroughly studied and the results applied to the characterization of dietary habits of fossil species. In this paper, we present inter- and intra-specific buccal microwear variability analyses in extant Cercopithecoidea (Cercopithecus mitis, C. neglectus, Chlorocebus aethiops, Colobus spp., Papio anubis) and Hominoidea (Gorilla gorilla, Pan troglodytes, Pongo pygmaeus). The results are tentatively compared to buccal microwear patterns of the Miocene fossils Dryopithecus and Oreopithecus. Significant differences in striation density and length are found among the fossil taxa studied and the extant primates, suggesting that buccal microwear can be used to identify dietary differences among taxa. The Dryopithecus buccal microwear pattern most closely resembles that of abrasive, tough plant foods consumers, such as the gorilla, in contrast to stud-ies of dental morphology that suggest a softer, frugivorous diet. Results for Oreopithecus were equivocal, but suggest a more abrasive diet than that previously thought.     

Relationships between dental microwear and diet in Carnivora (Mammalia) — Implications for the reconstruction of the diet of extinct taxa

Food consumption causes distinct microwear patterns on teeth, especially in mammals that actively masticate food. Here we perform a microwear analysis to assess the relationships between diet and microwear features of diverse Carnivora. Our database includes approximately 230 individuals of 17 extant species having different diets. We analyse both slicing and grinding facets of M1 and m1. The proposed method is reproducible and allows the differentiation, especially on slicing facets, of microwear poles that are significantly distinct from one another. In carnivorans, the microwear features mainly result from their foraging behavior and the proportion of certain food items consumed. We applied our method to extinct taxa such as the amphicyonid Amphicyon major. The results on the m1 slicing facet indicate dietary similarities between this large Miocene predator and the extant red fox; results from the m1 grinding facet do not have equivalent in extant taxa, however.     

Dental microwear and stable isotopes inform the paleoecology of extinct hominins

Determining the diet of an extinct species is paramount in any attempt to reconstruct its paleoecology. Because the distribution and mechanical properties of food items may impact postcranial, cranial, mandibular, and dental morphologies related to their procurement, ingestion, and mastication, these anatomical attributes have been studied intensively. However, while mechanical environments influence skeletal and dental features, it is not clear to what extent they dictate particular morphologies. Although biomechanical explanations have been widely applied to extinct hominins in attempts to retrodict dietary proclivities, morphology may say as much about what they were capable of eating, and perhaps more about phylogenetic history, than about the nature of the diet. Anatomical attributes may establish boundary limits, but direct evidence left by the foods that were actually (rather than hypothetically) consumed is required to reconstruct diet. Dental microwear and the stable light isotope chemistry of tooth enamel provide such evidence, and are especially powerful when used in tandem. We review the foundations for microwear and biogeochemistry in diet reconstruction, and discuss this evidence for six early hominin species (Ardipithecus ramidus, Australopithecus anamensis, Au. afarensis, Au. africanus, Paranthropus robustus, and P. boisei). The dietary signals derived from microwear and isotope chemistry are sometimes at odds with inferences from biomechanical approaches, a potentially disquieting conundrum that is particularly evident for several species.     

Seasonal Mortality Patterns in Primates: Implications for the Interpretation of Dental Microwear

The microscopic traces of use wear on teeth have been extensively studied to provide information that will assist in elucidating the dietary habits of extinct hominin species. 1 - 13 It has been amply documented that dental microwear provides information pertaining to diet for living animals, where there is a strong and consistent association between dental microwear patterns and different types of foods that are chewed. The details of occlusal surface wear patterns are capable of distinguishing among diets when the constituent food items differ in their fracture properties. 14 - 20 For example, the microwear traces left on the teeth of mammals that crush hard, brittle foods such as nuts are generally dominated by pits, whereas traces left on the teeth of mammals that shear tough items such as leaves tend to be characterized by scratches. These microwear features result from and thus record actual chewing events. As such, microwear patterns are expected to be variably ephemeral, as individual features are worn away and replaced or overprinted by others as the tooth wears down in subsequent bouts of mastication. Indeed, it has been demonstrated, both in the laboratory and the wild, that short‐term dietary variation can result in the turnover of microwear. 17 , 21 - 23 Because occlusal microwear potentially reflects an individual's diet for a short time (days, weeks, or months, depending on the nature of the foods being masticated), tooth surfaces sampled at different times will display differences that relate to temporal (for example, seasonal) differences in diet. 24     

Preliminary examination of non-occlusal dental microwear in anthropoids: Implications for the study of fossil primates

Most studies of microscopic wear on non-human primate teeth have focused on the occlusal surfaces of molars. Recent analyses of the buccal surfaces of human cheek teeth have demonstrated an association between diet and dental microwear on the these surfaces as well. In the current study, we examine microwear on both the buccal and lingual surfaces of non-human primate molars to assess the potential of these surfaces to reveal information concerning anthropoid feeding behaviors. We compare frequency of microwear occurrence in 12 extant and 11 fossil anthropoid species. Among the living primates, the occurrence of microwear on non-occlusal surfaces appears to relate to both diet and degree of terrestriality. The implications of this research for the inference of feeding behaviors and substrate use in fossil cercopithecoids are discussed. © 1996 Wiley-Liss, Inc.     

Microwear evidence for Plio-Pleistocene bovid diets from Makapansgat Limeworks Cave, South Africa

Makapansgat Limeworks Cave is a well-known Australopithecus africanus bearing locality that has spawned a considerable amount of paleoecological research because of its hominin component. Most recently, the paleoecology of this Plio-Pleistocene site has been studied by determining the diet and habitat of other extinct taxa, particularly the bovids. The diets of seven bovids (Aepyceros sp., Gazella vanhoepeni, Makapania broomi, Parmularius braini, Redunca darti, Tragelaphus sp. aff. T. angasii, and Tragelaphus pricei) have now been classified using taxonomic uniformitarianism, ecomorphology, stable carbon isotopes, and mesowear analysis. Here, dental microwear is applied to the same bovids for additional comparison and to further elucidate the strengths and weaknesses of each method. The different dietary proxy methods noted provide a temporal continuum, with genetic signals such as ecomorphology and taxonomic uniformitarianism indicating behavioral adaptations over geologic time, while nongenetic data such as stable carbon isotopes and mesowear reflect different aspects of average diet over extended portions of an animal's life, and dental microwear provides dietary snapshots.Microwear separated an extant baseline of ten bovid species into expected dietary categories and the Makapansgat bovids clearly fell into two groups with the same degree of separation as between extant grazers and browsers. The results indicate that a multidisciplinary approach produces a more accurate and robust reconstruction of past diets. In sum, the microwear analysis is in-line with the isotope and mesowear results, which suggest a stronger browsing component than either taxonomic uniformitarianism or ecomorphology imply.     

Incisor microwear and diet in three species of Colobus

Examination of incisor microwear in three species of Colobus revealed that the predominantly folivorous C. badius more closely resembles C. satanas, a seed predator/folivore, than C. guereza, another predominantly folivorous species. This demonstrates that species of the same broad dietary category can have very different patterns of incisor microwear, indicative of differences in food procurement behavior and/or the physical properties of dietary items for some portion of the diet. Conversely, species of different categories can have microwear patterns that, superficially at least, are quite similar. The dissimilarity in incisor microwear between C. badius and C. guereza is mirrored to a certain extent in molar microwear, although the differences are not nearly so great on the molars. The differences between C. badius and C. guereza may involve different food items in the major, folivorous portions of their diets, or they may relate to differences in the very minor fruit and bark components. The similar microwear patterns of C. badius and C. satanas demonstrate that incisor microwear by itself is unreliable for assigning fossil species to broad dietary categories. Incisor microwear can be used to infer finer dietary distinctions in fossil species for which dietary category has been determined by other means.     

Premolar microwear and tooth use in Australopithecus afarensis

The mandibular third premolar (P₃) of Australopithecus afarensis is notable for extensive morphological variability (e.g., metaconid presence/absence, closure of the anterior fovea, root number) and temporal trends in crown length and shape change over its 700 Ka time range. Hominins preceding A. afarensis have unicuspid, mesiodistally elongated P₃s with smaller talonids, and subsequent australopiths have bicuspid, more symmetrically-shaped P₃ crowns with expanded talonids. For these features, A. afarensis is intermediate and, thus, evinces the incipient stages of P₃ molarization. Here, we examine A. afarensis P₃ Phase II microwear and compare it with that of Australopithecus africanus and Cercocebus atys, an extant hard-object specialist, to assess whether the role of the P₃ in food processing changed over time in A. afarensis. Premolar Phase II microwear textures are also compared with those of the molars to look for evidence of functional differentiation along the tooth row (i.e., that foods with different mechanical properties were processed by separate regions of the postcanine battery). Microwear textures were also examined along the mesial protoconid crest, the site of occlusion with the maxillary canine, of the A. afarensis P₃ and compared with the same region in Pan troglodytes to determine whether microwear can be useful for identifying changes in the occlusal relationship between the P₃ and maxillary canine in early Australopithecus. Finally, temporal trends in P₃ Phase II and mesial microwear are considered. Results indicate that 1) both the P₃ and molar Phase II facets of A. afarensis have less complex microwear textures than in A. africanus or C. atys; 2) A. afarensis P₃ and molar Phase II textures differ, though not to the extent seen in taxa that eat hard and tough items; 3) microwear along the A. afarensis mesial protoconid crest is clearly distinct from that of the P. troglodytes, indicating that there is no honing equivalent in A. afarensis; and 4) there is little evidence of change over time in A. afarensis P₃ microwear on either the mesial or Phase II facet. In sum, these results provide no evidence that A. afarensis routinely loaded either its premolars or molars to process hard objects or that A. afarensis P₃ function changed over time.     

Dental topography and diets of Australopithecus afarensis and early Homo

Diet is key to understanding the paleoecology of early hominins. We know little about the diets of these fossil taxa, however, in part because of a limited fossil record, and in part because of limitations in methods available to infer their feeding adaptations. This paper applies a new method, dental topographic analysis, to the inference of diet from fossil hominin teeth. This approach uses laser scanning to generate digital 3D models of teeth and geographic information systems software to measure surface attributes, such as slope and occlusal relief. Because it does not rely on specific landmarks that change with wear, dental topographic analysis allows measurement and comparison of variably worn teeth, greatly increasing sample sizes compared with techniques that require unworn teeth. This study involved comparison of occlusal slope and relief of the lower second molars of Australopithecus afarensis (n=15) and early Homo (n=8) with those of Gorilla gorilla gorilla (n=47) and Pan troglodytes troglodytes (n=54). Results indicate that while all groups show reduced slope and relief in progressively more worn specimens, there are consistent differences at given wear stages among the taxa. Early Homo shows steeper slopes and more relief than chimpanzees, whereas A. afarensis shows less slope and relief than any of the other groups. The differences between the two hominin taxa are on the same order as those between the extant apes, suggesting similar degrees of difference in diet. Because these chimpanzees and gorillas differ mostly in fallback foods where they are sympatric, results suggest that the early hominins may likewise have differed mostly in fallback foods, with A. afarensis emphasizing harder, more brittle foods, and early Homo relying on tougher, more elastic foods.     

Limb-size proportions in Australopithecus afarensis and Australopithecus africanus

Previous analyses have suggested that Australopithecus africanus possessed more apelike limb proportions than Australopithecus afarensis. However, due to the errors involved in estimating limb length and body size, support for this conclusion has been limited. In this study, we use a new Monte Carlo method to (1) test the hypothesis that A. africanus had greater upper:lower limb-size proportions than A. afarensis and (2) assess the statistical significance of interspecific differences among these taxa, extant apes, and humans. Our Monte Carlo method imposes sampling constraints that reduce extant ape and human postcranial measurements to sample sizes comparable to the fossil samples. Next, composite ratios of fore- and hindlimb geometric means are calculated for resampled measurements from the fossils and comparative taxa. Mean composite ratios are statistically indistinguishable (alpha=0.05) from the actual ratios of extant individuals, indicating that this method conserves each sample's central tendency. When applied to the fossil samples, upper:lower limb-size proportions in A. afarensis are similar to those of humans (p=0.878) and are significantly different from all great ape proportions (p< or =0.034), while Australopithecus africanus is more similar to the apes (p> or =0.180) and significantly different from humans and A. afarensis (p< or =0.031). These results strongly support the hypothesis that A. africanus possessed more apelike limb-size proportions than A. afarensis, suggesting that A. africanus either evolved from a more postcranially primitive ancestor than A. afarensis or that the more apelike limb-size proportions of A. africanus were secondarily derived from an A. afarensis-like ancestor. Among the extant taxa, limb-size proportions correspond with observed levels of forelimb- and hindlimb-dominated positional behaviors. In conjunction with detailed anatomical features linked to arboreality, these results suggest that arboreal posture and locomotion may have been more important components of the A. africanus behavioral repertoire relative to that of A. afarensis.     

Dental microwear texture and anthropoid diets

Dental microwear has long been used as evidence concerning the diets of extinct species. Here, we present a comparative baseline series of dental microwear textures for a sample of 21 anthropoid primate species displaying interspecific and intraspecific dietary variability. Four dental microwear texture variables (complexity, anisotropy, textural fill volume, and heterogeneity) were computed based on scale-sensitive fractal analysis and high-resolution three-dimensional renderings of microwear surfaces collected using a white-light confocal profiler. The purpose of this analysis was to assess the extent to which these variables reflect variation in diet. Significant contrasts between species with diets known to include foods with differing material properties are clearly evident for all four microwear texture variables. In particular, species that consume more tough foods, such as leaves, tended to have high levels of anisotropy and low texture complexity. The converse was true for species including hard and brittle items in their diets either as staples or as fallback foods. These results reaffirm the utility of dental microwear texture analysis as an important tool in making dietary inferences based on fossil primate samples.     

Dental microwear and diet of the Plio-Pleistocene hominin Paranthropus boisei

The Plio-Pleistocene hominin Paranthropus boisei had enormous, flat, thickly enameled cheek teeth, a robust cranium and mandible, and inferred massive, powerful chewing muscles. This specialized morphology, which earned P. boisei the nickname "Nutcracker Man", suggests that this hominin could have consumed very mechanically challenging foods. It has been recently argued, however, that specialized hominin morphology may indicate adaptations for the consumption of occasional fallback foods rather than preferred resources. Dental microwear offers a potential means by which to test this hypothesis in that it reflects actual use rather than genetic adaptation. High microwear surface texture complexity and anisotropy in extant primates can be associated with the consumption of exceptionally hard and tough foods respectively. Here we present the first quantitative analysis of dental microwear for P. boisei. Seven specimens examined preserved unobscured antemortem molar microwear. These all show relatively low complexity and anisotropy values. This suggests that none of the individuals consumed especially hard or tough foods in the days before they died. The apparent discrepancy between microwear and functional anatomy is consistent with the idea that P. boisei presents a hominin example of Liem's Paradox, wherein a highly derived morphology need not reflect a specialized diet.     

Ecogeographic variation in Neandertal dietary habits: evidence from occlusal molar microwear texture analysis

In the late Middle and early Late Pleistocene, Neandertals inhabited a wide variety of ecological zones across western Eurasia during both glacial and interglacial times. To elucidate the still poorly understood effects of climatic change on Neandertal subsistence patterns, this study employs dental microwear texture analysis to reconstruct the diets of Neandertal individuals from various sites across their wide temporal and geographic ranges. The results of this study reveal environmentally-driven differences in the diets of Neandertal groups. Significant differences in microwear signatures, correlated with paleoecological conditions, were found among Neandertal groups that lived in open, mixed, and wooded environments. In comparison to recent hunter-gatherer populations with known, yet diverse diets, the occlusal molar microwear signatures of all the Neandertal groups indicate that their diet consisted predominantly of meat. However, the results of this study suggest that plant foods did form an important part of the diet of at least some Neandertal groups (i.e., those that lived in mixed and wooded habitats). Overall, the proportion of plant foods in the Neandertal diet appears to have increased with the increase in tree cover.     

Dental microwear texture analysis: technical considerations

Dental microwear analysis is commonly used to infer aspects of diet in extinct primates. Conventional methods of microwear analysis have usually been limited to two-dimensional imaging studies using a scanning electron microscope and the identification of apparent individual features. These methods have proved time-consuming and prone to subjectivity and observer error. Here we describe a new methodological approach to microwear: dental microwear texture analysis, based on three-dimensional surface measurements taken using white-light confocal microscopy and scale-sensitive fractal analysis. Surface parameters for complexity, scale of maximum complexity, anisotropy, heterogeneity, and textural fill volume offer repeatable, quantitative characterizations of three-dimensional surfaces, free of observer measurement error. Some results are presented to illustrate how these parameters distinguish extant primates with different diets. In this case, microwear surfaces of Cebus apella and Lophocebus albigena, which consume some harder food items, have higher average values for complexity than do folivores or soft fruit eaters.     

Brief communication: Short- and long-term in vivo human buccal-dental microwear turnover

Buccal-dental microwear depends on the abrasive content of chewed foodstuffs and can reveal long-term dietary trends in human populations. However, in vivo experimental analyses of buccal microwear formation processes are scarce. Here, we report the effects of an abrasive diet on microwear rates in two adult volunteers at intervals of 8 days over a period of 1 month and document long-term turnover over 5 consecutive years in the same subjects under an ad libitum Mediterranean diet. Buccal microwear was analyzed on mandibular first molars using high-resolution replicas and scanning electron microscopy. Microwear turnover was assessed by recording the scratches lost and gained at each time point. Our results indicate that scratch formation on enamel surfaces increased with a highly abrasive diet compared to both pre-test and post-test ad libitum dietary controls. In the long-term analysis, scratch turnover was higher than expected, but no significant long-term trends in microwear density or length were observed, because microwear formation was compensated by scratch disappearance. Our results confirm that buccal microwear patterns on mandibular molars show a dynamic formation process directly related to the chewing of abrasive particles along with ingested food. In addition, the observed long-term stability of buccal microwear patterns makes them a reliable indicator of overall dietary habits.     

Dietary Abrasiveness Is Associated with Variability of Microwear and Dental Surface Texture in Rabbits

Dental microwear and 3D surface texture analyses are useful in reconstructing herbivore diets, with scratches usually interpreted as indicators of grass dominated diets and pits as indicators of browse. We conducted feeding experiments with four groups of rabbits (Oryctolagus cuniculus) each fed a different uniform, pelleted diet (lucerne, lucerne & oats, grass & oats, grass). The lowest silica content was measured in the lucerne and the highest in the grass diet. After 25 weeks of exposure to the diets, dental castings were made of the rabbit''s lower molars. Occlusal surfaces were then investigated using dental microwear and 3D areal surface texture analysis. In terms of traditional microwear, we found our hypothesis supported, as the grass group showed a high proportion of (long) “scratches” and the lucerne group a high proportion of “pits”. Regardless of the uniform diets, variability of microwear and surface textures was higher when silica content was low. A high variability in microwear and texture analysis thus need not represent dietary diversity, but can also be related to a uniform, low-abrasion diet. The uniformity or variability of microwear/texture analysis results thus might represent varying degrees of abrasion and attrition rather than a variety of diet items per se.     

Folivory or fruit/seed predation for Mesopithecus, an earliest colobine from the late Miocene of Eurasia?

Here we compare dental microwear textures from specimens of the fossil genus Mesopithecus (Cercopithecidae, Colobinae) from the late Miocene of Eastern Europe with dental microwear textures from four extant primate species with known dietary differences. Results indicate that the dental microwear textures of Mesopithecus differ from those of extant leaf eaters Alouatta palliata and Trachypithecus cristatus and instead resemble more closely those of the occasional hard-object feeders Cebus apella and Lophocebus albigena. Microwear texture data presented here in combination with results from previous analyses suggest that Mesopithecus was a widespread, opportunistic feeder that often consumed hard seeds. These data are consistent with the hypothesis that early colobines may have preferred hard seeds to leaves.     

Early Miocene catarrhine dietary behaviour: the influence of the Red Queen Effect on incisor shape and curvature

The early Miocene catarrhine fossil record of East Africa represents a diverse and extensive adaptive radiation. It is well accepted that these taxa encompass a dietary range similar to extant hominoids, in addition to some potentially novel dietary behaviour. There have been numerous attempts to infer diet for these taxa from patterns of dental allometry and incisor and molar microwear, however, morphometric analyses until now have been restricted to the post-canine dentition. It has already been demonstrated that given the key functional role of the incisors in pre-processing food items prior to mastication, there is a positive correlation between diet and incisal curvature (Deane, A.S., Kremer, E.P., Begun, D.R., 2005. A new approach to quantifying anatomical curvatures using High Resolution Polynomial Curve Fitting (HR-PCF). Am. J. Phys. Anthropol. 128(3), 630-638.; Deane, A.S., 2007. Inferring dietary behaviour for Miocene hominoids: A high-resolution morphometric approach to incisal crown curvature. Ph.D. Dissertation. The University of Toronto.). This study seeks to re-examine existing dietary hypotheses for large-bodied early Miocene fossil catarrhines by contrasting the incisal curvature for these taxa with comparative models derived from prior studies of the correlation between extant hominoid incisor curvature and feeding behaviour. Incisor curvature was quantified for 78 fossil incisors representing seven genera, and the results confirm that early Miocene fossil catarrhines represent a dietary continuum ranging from more folivorous (i.e., Rangwapithecus) to more frugivorous (i.e., Proconsul) diets, as well as novel dietary behaviours that are potentially similar to extant ceboids (i.e., Afropithecus). Additionally, early Miocene fossil catarrhine incisors are less curved than extant hominoid incisors, indicating a general pattern of increasing mesio-distal and labial curvature through time. This pattern of morphological shifting is consistent with the Red Queen Effect (Van Valen, L., 1973. A new evolutionary law. Evol. Theory 1, 1-30), which predicts that taxa that are removed from one another by geological time, although potentially having similar diets, may exhibit differing degrees of a similar dietary adaptation (i.e., differing degrees of incisal curvature).