Performance validation of an improved Xenon-arc lamp-based CCD camera system for multispectral imaging in proteomics

Advances in gel-based nonradioactive protein expression and PTM detection using fluorophores has served as the impetus for developing analytical instrumentation with improved imaging capabilities. We describe a CCD camera-based imaging instrument, equipped with both a high-pressure Xenon arc lamp and a UV transilluminator, which provides broad-band wavelength coverage (380-700 nm and UV). With six-position filter wheels, both excitation and emission wavelengths may be selected, providing optimal measurement and quantitation of virtually any dye and allowing excellent spectral resolution among different fluorophores. While spatial resolution of conventional fixed CCD camera imaging systems is typically inferior to laser scanners, this problem is circumvented with the new instrument by mechanically scanning the CCD camera over the sample and collecting multiple images that are subsequently automatically reconstructed into a complete high-resolution image. By acquiring images in succession, as many as four different fluorophores may be evaluated from a gel. The imaging platform is suitable for analysis of the wide range of dyes and tags commonly encountered in proteomics investigations. The instrument is unique in its capabilities of scanning large areas at high resolution and providing accurate selectable illumination over the UV/visible spectral range, thus maximizing the efficiency of dye multiplexing protocols.     

Sensitive, quantitative, and fast modifications for Coomassie Blue staining of polyacrylamide gels

In spite of the high sensitivity of silver staining and the wide dynamic range of various fluorescent detection methods, Coomassie Brilliant Blue staining is still the most widely used protein detection technique for proteins separated by polyacrylamide gel electrophoresis. There are several reasons: Low price, Visible with the eye, Desk top scanners can be employed for image acquisition, Better for quantitative analysis than silver staining, Possible modifications for fast or highly sensitive staining, Mass spectrometry compatible.     

Development of improved cell lysis, solubilization and imaging approaches for proteomic analyses

Analysis of complex biochemical processes at the level of the proteome requires methods that quantitatively solubilize cytosolic and membrane bound proteins yet are compatible with isoelectric focusing and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. In addition, it is often necessary to employ several highly sensitive detection methods to identify key proteins that are modified or exhibit a change in expression levels in response to a given experimental stimulus or condition. Methods were developed that efficiently extract tissues or lyse cultured cells and quantitatively solubilize proteins in a single step without the need to shear nucleic acids. These approaches utilize urea, thiourea, a mixture of detergents, low levels of an ampholyte blend, reductant and a combination of alcohols. To aid in the detection of low abundance proteins and the accurate identification of specific proteins of interest in these samples, two approaches were pursued. In one, proteins are transferred from two-dimensional (2-D) gels to blot membranes. Proteins are then detected by staining with SYPRO Ruby and the resulting 2-D protein pattern is captured using a charge-coupled device (CCD) camera. The blots are then probed with antibodies directed against the protein(s) or functionalities of interest. The resulting chemiluminescent blot image is also generated with the CCD camera and the fluorescent SYPRO Ruby image is recaptured again without moving the membrane. It is thereby possible to generate a direct image overlay of the blot pattern on that of the stained protein pattern. This approach significantly aids in the accurate identification of the dye-stained protein that is detected by the specific antibody. In addition to detecting protein post-gel transfer, a second approach utilizes protein samples labeled with fluorescent dyes prior to 2-D electrophoresis in an effort to increase the sensitivity of protein detection and to facilitate protein quantitation. It is also possible to stain the blots with different dyes and overlay these images as well. Using these approaches, it is possible to perform more rapid and accurate comparative analyses and proteomic, post-gel characterization of proteins of interest than using comparative image analysis of multiple gels.     

Ultrafast coelectrophoretic fluorescent staining of proteins with carbocyanines

Protein detection on SDS gels or on 2-D gels must combine several features, such as sensitivity, homogeneity from one protein to another, speed, low cost, and user-friendliness. For some applications, it is also interesting to have a nonfixing stain, so that proteins can be mobilized from the gel for further use (electroelution, blotting). We show here that coelectrophoretic staining by fluorophores of the oxacarbocyanine family, and especially diheptyloxacarbocyanine, offers several positive features. The sensitivity is intermediate between the one of colloidal CBB and the one of fluorescent ruthenium complexes. Detection is achieved within 1 h after the end of the electrophoretic process and does not use any fixing or toxic agent. The fluorescent SDS-carbocyanine-protein complexes can be detected either with a laser scanner with an excitation wavelength of 488 nm or with a UV table operating at 302 nm. Excellent sequence coverage in subsequent MS analysis of proteolytic peptides is also achieved with this detection method.     

ProteomIQ blue, a potent post-stain for the visualization and subsequent mass spectrometry based identification of fluorescent stained proteins on 2D-gels

Manual spot excision for protein identification from fluorescent stained two-dimensional (2-D) gels is hard to accomplish. Here, we explore the use of ProteomIQ Blue as a post-stain method for the visualization of fluorescent stained/labeled proteins. We show that ProteomIQ Blue post-staining is almost as sensitive as staining with SYPRO Ruby or cyanine dyes alone. More than 90% of the protein spots that are stained with the fluorescent stains are still detectable with ProteomIQ Blue. In protein identification by mass spectrometry, ProteomIQ Blue post-stained spots provide high sensitivity and high protein sequence coverage of the peptide mass maps in both MALDI-TOF-MS and ESI-MS/MS analyses. In conclusion, post-staining of fluorescent stained gels with ProteomIQ Blue provides a facile and a powerful method to achieve quantitative protein analysis as well as protein identification in the same semianalytical gel without requiring sophisticated/expensive robotic equipment.     

Evaluation of saturation labelling two-dimensional difference gel electrophoresis fluorescent dyes

Two-dimensional difference gel electrophoresis (2-D DIGE) enables an increased confidence in detection of protein differences. However, due to the nature of the minimal labelling where only approximately 5% of a given protein is labelled, spots cannot be directly excised for mass spectrometry (MS) analysis and detection sensitivity could be further enhanced. Amersham Biosciences have developed a second set of CyDye DIGE Cy 3 and Cy5 dyes, which aim to overcome these limitations through saturation-labelling of cysteine residues. The dyes were evaluated in relation to their sensitivity and dynamic range, their useability as multiplexing reagents and the possibility of direct spot picking from saturation-labelled gels for MS analysis. The saturation-labelling dyes were superior in sensitivity to their minimal-labelling counterparts, silver stain and Sypro Ruby, however, the resulting 2-D spot pattern was significantly altered from that of unlabelled or minimal-labelled protein. The dyes were found to be useful as multiplexing reagents although preferential labelling of proteins with one dye over another was observed but was controlled for through experimental design. Protein identities were successfully obtained from material directly excised from saturation-labelled gels eliminating the need for post-stained preparative gels.     

Two-photon absorption properties of fluorescent proteins

Two-photon excitation of fluorescent proteins is an attractive approach for imaging living systems. Today researchers are eager to know which proteins are the brightest and what the best excitation wavelengths are. Here we review the two-photon absorption properties of a wide variety of fluorescent proteins, including new far-red variants, to produce a comprehensive guide to choosing the right fluorescent protein and excitation wavelength for two-photon applications.     

An accurate proteomic quantification method: Fluorescence labeling absolute quantification (FLAQ) using multidimensional liquid chromatography and tandem mass spectrometry

A facile proteomic quantification method, fluorescent labeling absolute quantification (FLAQ), was developed. Instead of using MS for quantification, the FLAQ method is a chromatography-based quantification in combination with MS for identification. Multidimensional liquid chromatography (MDLC) with laser-induced fluorescence (LIF) detection with high accuracy and tandem MS system were employed for FLAQ. Several requirements should be met for fluorescent labeling in MS identification: Labeling completeness, minimum side-reactions, simple MS spectra, and no extra tandem MS fragmentations for structure elucidations. A fluorescence dye, 5-iodoacetamidofluorescein, was finally chosen to label proteins on all cysteine residues. The fluorescent dye was compatible with the process of the trypsin digestion and MALDI MS identification. Quantitative labeling was achieved with optimization of reacting conditions. A synthesized peptide and model proteins, BSA (35 cysteines), OVA (five cysteines), were used for verifying the completeness of labeling. Proteins were separated through MDLC and quantified based on fluorescent intensities, followed by MS identification. High accuracy (RSD% < 1.58) and wide linearity of quantification (1-10(5) ) were achieved by LIF detection. The limit of quantitation for the model protein was as low as 0.34 amol. Parts of proteins in human liver proteome were quantified and demonstrated using FLAQ.     

Comparison of SYPRO Ruby and Flamingo fluorescent stains for application in proteomic research

Fluorescent dyes are widely used for the detection and quantitation of proteins separated by polyacrylamide gel electrophoresis. SYPRO Ruby is one such fluorescent dye widely used for this purpose. More recently, another fluorescent dye, Flamingo, is available for expression proteomic research. Using a standard ultraviolet (UV) transilluminator and a charge-coupled device (CCD)-based imaging system, the relative sensitivity of these two different fluorescent stains with regard to detection of protein spots separated by two-dimensional gel electrophoresis (2D-GE) and identification by liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) were compared. Using mouse kidney and liver homogenates as well as Escherichia coli extract, we detected a greater number of protein spots using Flamingo compared with SYPRO Ruby. In addition, when we compared the number of matched peptides and the percentage of amino acid residues identified for 22 different protein spots of mouse kidney proteome, we observed a higher number of matched peptides and a higher percentage of amino acid residues for the majority of the proteins using Flamingo compared with SYPRO Ruby. Also, we were able to characterize a protein spot that can be detected by Flamingo only. Therefore, we recommend Flamingo over SYPRO Ruby to be used for studies on expression proteomics.     

Direct visualization of fluorescent signals in protein gels using a backlit blue light plate

The visualization of fluorescently labeled protein gels is required for the analysis of electrophoretic results or manually picking protein bands or spots from gels. To accomplish this task, an UV light table is generally utilized, but may be hazardous to operators. The blue light transilluminator is another apparatus that may be used for this purpose, but is sometimes insufficient for revealing weak fluorescent signals. In this study, we invented a new setup utilizing a backlit blue light plate for illuminating fluorescently stained protein gels. This method employs Snell's law and allows for the direct visualization of fluorescent signals in protein gels without the use of a filter or filter glasses. This safe, convenient, economic, and effective setup was found to be an ideal alternative for illuminating fluorescent protein gels in proteomic experiments.     

Evaluating peptide mass fingerprinting-based protein identification

Identification of proteins by mass spectrometry (MS) is an essential step in proteomic studies and is typically accomplished by either peptide mass fingerprinting (PMF) or amino acid sequencing of the peptide. Although sequence information from MS/MS analysis can be used to validate PMF-based protein identification, it may not be practical when analyzing a large number of proteins and when high- throughput MS/MS instrumentation is not readily available. At present, a vast majority of proteomic studies employ PMF. However, there are huge disparities in criteria used to identify proteins using PMF. Therefore, to reduce incorrect protein identification using PMF, and also to increase confidence in PMF-based protein identification without accompanying MS/MS analysis, definitive guiding principles are essential. To this end, we propose a value-based scoring system that provides guidance on evaluating when PMF-based protein identification can be deemed sufficient without accompanying amino acid sequence data from MS/MS analysis.     

Real-time fluorescence monitoring of tryptic digestion in proteomics

Ensuring that proteolytic digestions are complete before submitting samples for downstream proteomic analyses is important, as failure or partial digestion can waste valuable instrument time and make results difficult to interpret. Conversely, overdigestion can also be problematic, such as when removing affinity tags from recombinant proteins or using nonspecific proteases. The techniques of HPLC, circular dichroism, SDS-PAGE, and MS have each been used to assess protein digestion. These techniques are slow, may require expensive instrumentation, can be inaccurate, and/or are unsuitable for real-time monitoring. Epicocconone is a natural fluorophore that reacts reversibly with proteins to form a highly fluorescent adduct and has previously been used to quantify proteins in 1D and 2D gels and in solution. Here, we describe a new method for the real-time monitoring of protein digestion based on epicocconone. This unique in situ fluorescent assay can tracelessly follow proteolysis of samples, at low microgram levels, destined for proteomics analysis or purification.     

A methodology for simultaneous fluorogenic derivatization and boronate affinity enrichment of 3-nitrotyrosine-containing peptides

We synthesized and characterized a new tagging reagent, (3R,4S)-1-(4-(aminomethyl)phenylsulfonyl)pyrrolidine-3,4-diol (APPD), for the selective fluorogenic derivatization of 3-nitrotyrosine (3-NT) residues in peptides (after reduction to 3-aminotyrosine) and affinity enrichment. The synthetic 3-NT-containing peptide, FSAY(3-NO₂)LER, was employed as a model for method validation. Furthermore, this derivatization protocol was successfully tested for analysis of 3-NT-containing proteins exposed to peroxynitrite in the total protein lysate of cultured C2C12 cells. The quantitation of 3-NT content in samples was achieved through either fluorescence spectrometry or boronate affinity chromatography with detection by specific fluorescence (excitation and emission wavelengths of 360 and 510 nm, respectively); the respective limits of detection were 95 and 68 nM (19 and 13 pmol total amount) of 3-NT. Importantly, the derivatized peptides show a strong retention on a synthetic boronate affinity column, containing sulfonamide-phenylboronic acid, under mild chromatographic conditions, affording a route to separate the derivatized peptides from large amounts (milligrams) of nonderivatized peptides and to enrich them for fluorescent detection and mass spectrometry (MS) identification. Tandem MS analysis identified chemical structures of peptide 3-NT fluorescent derivatives and revealed that the fluorescent derivatives undergo efficient backbone fragmentations, permitting sequence-specific identification of protein nitration at low concentrations of 3-NT in complex protein mixtures.     

Difference in mass analysis using labeled lysines (DIMAL-K): a new, efficient proteomic quantification method applied to the analysis of astrocytic secretomes

Here we describe an original strategy for unbiased quantification of protein expression called difference in mass analysis using labeled lysine (K) (DIMAL-K). DIMAL-K is based on the differential predigestion labeling of lysine residues in complex protein mixtures. The method is relevant for proteomic analysis by two-dimensional electrophoresis and MALDI-TOF mass spectrometry. Protein labeling on lysine residues uses two closely related chemical reagents, S-methyl thioacetimidate and S-methyl thiopropionimidate. Using protein standards, we demonstrated that 1) the chemical labeling was quantitative, specific, and rapid; 2) the differentially labeled proteins co-migrated on two-dimensional gels; and 3) the identification by mass fingerprinting and the relative quantification of the proteins were possible from a single MALDI-TOF mass spectrum. The power of the method was tested by comparing and quantifying the secretion of proteins in normal and proinflammatory astrocytic secretomes (20 microg). We showed that DIMAL-K was more sensitive and accurate than densitometric image analysis and allowed the detection and quantification of novel proteins.     

Analysis of UV-excited fluorochromes by flow cytometry using near-ultraviolet laser diodes.

INTRODUCTION: Violet laser diodes have become common and reliable laser sources for benchtop flow cytometers. While these lasers are very useful for a variety of violet and some ultraviolet-excited fluorochromes (e.g., DAPI), they do not efficiently excite most UV-stimulated probes. In this study, the next generation of InGaN near-UV laser diodes (NUVLDs) emitting in the 370-375-nm range have been evaluated as laser sources for cuvette-based flow cytometers. METHODS: Several NUVLDs, ranging in wavelength from 370 to 374 nm and in power level from 1.5 to 10 mW, were mounted on a BD Biosciences LSR II and evaluated for their ability to excite cells labeled with the UV DNA binding dye DAPI, several UV phenotyping fluorochromes (including Alexa Fluor 350, Marina Blue, and quantum dots), and the fluorescent calcium chelator indo-1. RESULTS: NUVLDs at the 8-10-mW power range gave detection sensitivity levels comparable to more powerful solid-state and ion laser sources, using low-fluorescence microsphere beads as measurement standards. NUVLDs at all tested power levels allowed extremely high-resolution DAPI cell cycle analysis, and sources in the 8-10-mW power range excited Alexa Fluor 350, Marina Blue, and a variety of quantum dots at virtually the same signal-to-noise ratios as more powerful UV sources. CONCLUSIONS: These evaluations indicate that near-UV laser diodes installed on a cuvette-based flow cytometer performed nearly as well as more powerful solid-state UV lasers on the same instrumentation, and comparably to more powerful ion lasers on a jet-in-air system, and. Despite their limited power, integration of these small and inexpensive lasers into benchtop flow cytometers should allow the use of flow cytometric applications requiring UV excitation on a wide variety of instruments.     

Equilibrium gel permeation: measurement of solute partitioning by direct fluorescence scanning

The feasibility of using fluorescence detection in quantitative gel permeation measurements has been explored. It is shown that the effect of scattering by the gel matrix can be evaluated in terms of pathlength-dependent turbidity functions for excitation and emission wavelengths. Experimental studies were carried out to evaluate these functions in cross-linked dextran gels (Sephadexes) and in agarose gels (Sepharoses). Empirical turbidity functions derived for these gels have a simple form, leading to accurate simplifying approximations for the scattering correction required in a fluorescence gel permeation measurement. Using this approach, partition cross-sections were estimated for dansyl-conjuaated β-gamma globuline and for dansyl-conjugated bovine serum albumin. The results establish feasibility of the method and clearly indicate the instrumentation requirements for its accurate implementation.     

Evaluation of two-dimensional difference gel electrophoresis for protein profiling. Soluble proteins of the marine bacterium Pirellula sp. strain 1

Two-dimensional gel electrophoresis (2DE) is a central tool of proteome research, since it allows separation of complex protein mixtures at highest resolution. Quantification of gene expression at the protein level requires sensitive visualization of protein spots over a wide linear range. Two-dimensional difference gel electrophoresis (2D DIGE) is a new fluorescent technique for protein labeling in 2DE gels. Proteins are labeled prior to electrophoresis with fluorescent CyDyes trade mark and differently labeled samples are then co-separated on the same 2DE gel. We evaluated 2D DIGE for detection and quantification of proteins specific for glucose or N-acetylglucosamine metabolism in the marine bacterium Pirellula sp. strain 1. The experiment was based on 10 parallel 2DE gels. Detection and comparison of the protein spots were performed with the DeCyder trade mark software that uses an internal standard to quantify differences in protein abundance with high statistical confidence; 24 proteins differing in abundance by a factor of at least 1.5 (t test value <10(-9)) were identified. For comparison, another experiment was carried out with four SYPRO-Ruby-stained 2DE gels for each of the two growth conditions; image analysis was done with the ImageMaster trade mark 2D Elite software. Sensitivity of the CyDye fluors was evaluated by comparing Cy2, Cy3, Cy5, SYPRO Ruby, silver, and colloidal Coomassie staining. Three replicate gels, each loaded with 50 microg of protein, were run for each stain and the gels were analyzed with the ImageMaster software. Labeling with CyDyes allowed detection of almost as many protein spots as staining with silver or SYPRO Ruby.     

Effects of multispectral excitation on the sensitivity of molecular optoacoustic imaging

Molecular optoacoustic (photoacoustic) imaging typically relies on the spectral identification of absorption signatures from molecules of interest. To achieve this, two or more excitation wavelengths are employed to sequentially illuminate tissue. Due to depth‐related spectral dependencies and detection related effects, the multispectral optoacoustic tomography (MSOT) spectral unmixing problem presents a complex non‐linear inversion operation. So far, different studies have showcased the spectral capacity of optoacoustic imaging, without however relating the performance achieved to the number of wavelengths employed. Overall, the dependence of the sensitivity and accuracy of optoacoustic imaging as a function of the number of illumination wavelengths has not been so far comprehensively studied. In this paper we study the impact of the number of excitation wavelengths employed on the sensitivity and accuracy achieved by molecular optoacoustic tomography. We present a quantitative analysis, based on synthetic MSOT datasets and observe a trend of sensitivity increase for up to 20 wavelengths. Importantly we quantify this relation and demonstrate an up to an order of magnitude sensitivity increase of multi‐wavelength illumination vs. single or dual wavelength optoacoustic imaging. Examples from experimental animal studies are finally utilized to support the findings.

In vivo MSOT imaging of a mouse brain bearing a tumor that is expressing a near‐infrared fluorescent protein. ( a ) Monochromatic optoacoustic imaging at the peak excitation wavelength of the fluorescent protein. ( b ) Overlay of the detected bio‐distribution of the protein (red pseudocolor) on the monochromatic optoacoustic image. ( c ) Ex vivo validation by means of cryoslicing fluorescence imaging.     

HTAPP: High‐throughput autonomous proteomic pipeline

Recent advances in the speed and sensitivity of mass spectrometers and in analytical methods, the exponential acceleration of computer processing speeds, and the availability of genomic databases from an array of species and protein information databases have led to a deluge of proteomic data. The development of a lab‐based automated proteomic software platform for the automated collection, processing, storage, and visualization of expansive proteomic data sets is critically important. The high‐throughput autonomous proteomic pipeline described here is designed from the ground up to provide critically important flexibility for diverse proteomic workflows and to streamline the total analysis of a complex proteomic sample. This tool is composed of a software that controls the acquisition of mass spectral data along with automation of post‐acquisition tasks such as peptide quantification, clustered MS/MS spectral database searching, statistical validation, and data exploration within a user‐configurable lab‐based relational database. The software design of high‐throughput autonomous proteomic pipeline focuses on accommodating diverse workflows and providing missing software functionality to a wide range of proteomic researchers to accelerate the extraction of biological meaning from immense proteomic data sets. Although individual software modules in our integrated technology platform may have some similarities to existing tools, the true novelty of the approach described here is in the synergistic and flexible combination of these tools to provide an integrated and efficient analysis of proteomic samples.     

Proteome profiling of human epithelial ovarian cancer cell line TOV-112D

A proteome profiling of the epithelial ovarian cancer cell line TOV-112D was initiated as a protein expression reference in the study of ovarian cancer. Two complementary proteomic approaches were used in order to maximise protein identification: two-dimensional gel electrophoresis (2DE) protein separation coupled to matrix assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF MS) and one-dimensional gel electrophoresis (1DE) coupled to liquid-chromatography tandem mass spectrometry (LC MS/MS). One hundred and seventy-two proteins have been identified among 288 spots selected on two-dimensional gels and a total of 579 proteins were identified with the 1DE LC MS/MS approach. This proteome profiling covers a wide range of protein expression and identifies several proteins known for their oncogenic properties. Bioinformatics tools were used to mine databases in order to determine whether the identified proteins have previously been implicated in pathways associated with carcinogenesis or cell proliferation. Indeed, several of the proteins have been reported to be specific ovarian cancer markers while others are common to many tumorigenic tissues or proliferating cells. The diversity of proteins found and their association with known oncogenic pathways validate this proteomic approach. The proteome 2D map of the TOV-112D cell line will provide a valuable resource in studies on differential protein expression of human ovarian carcinomas while the 1DE LC MS/MS approach gives a picture of the actual protein profile of the TOV-112D cell line. This work represents one of the most complete ovarian protein expression analysis reports to date and the first comparative study of gene expression profiling and proteomic patterns in ovarian cancer.