Glass‐Ceramic‐Like Vanadate Cathodes for High‐Rate Lithium‐Ion Batteries

Nanostructured electrode materials are good candidates in batteries especially for high‐rate applications, yet they often suffer from extensive side reactions due to anomalously large surface areas. While micrometer‐size materials provide better stability, the lattice diffusivity is often too slow for lithium ion intercalation over the same length scale in a short time. Herein, a simple method to synthesize glass‐ceramic‐like vanadate cathodes for lithium‐ion batteries with abundant internal boundaries that allow fast lithium ion diffusion while maintaining a small surface area that thus minimize the contact and side reactions with organic electrolyte, is reported. Such samples heat‐treated under optimized conditions can deliver an impressive high‐rate capacity of 103 mAh g^?1 at 4000 mA g^?1 over 500 cycles, which has better kinetics and cycling stability than similar vanadate‐based materials. A striking grain‐size refinement effect accompanied by a low‐temperature growth‐controlled phase transition, can be achieved by fine tuning the heat‐treatment process. It is believed that the findings are general for other transition metal oxides for energy applications.     

Calorimetric and optical characterization of sickle cell hemoglobin gelation.

We have used two techniques to characterize the gelation of deoxyhemoglobin S, a high sensitivity heat-flow calorimeter to measure the heat of gelation and a simple light-transmission method to measure the optical birefringence resulting from the alignment of deoxyhemoglobin S fibers in the gel. A theory for the interpretation of the birefringence measurements is presented. We combine the results of the calorimetric and optical measurements with those of sedimentation experiments to obtain enthalpy changes for gelation. The enthalpy change obtained from scanning and isothermal calorimetric measurements (0.25 m-potassium phosphate, 0.05 m-sodium dithionite, pH 6.9) varies from 4000 to 2200 cal mol⁻¹ hemoglobin between 16 and 25 °C. There is a large apparent heat capacity change of −130 to −190 cal deg.⁻¹ mol⁻¹. The apparent enthalpy change estimated from solubility measurements and birefringence melting experiments is 2200 ± 500 cal mol⁻¹ in qualitative agreement with the calorimetric results. Analysis of the time dependence of the calorimetric and optical progress curves at 20 °C leads to a rough estimate of 1800 to 4000 and −800 to 1500 cal mol⁻¹ hemoglobin for the enthalpies of polymerization and alignment of fibers, respectively. The small magnitude of the observed enthalpy change is in accord with the view that no large conformational change takes place in the deoxyhemoglobin S molecule upon gelation.     

Evaluation of Tadalafil Nanosuspensions and Their PEG Solid Dispersion Matrices for Enhancing Its Dissolution Properties

The aim of this work was to prepare and evaluate Tadalafil nanosuspensions and their PEG 4000 solid dispersion matrices to enhance its dissolution rate. Nanosuspensions were prepared by precipitation/ultrasonication technique at 5°C where different stabilizers were screened for stabilization. Nanosuspensions were characterized in terms of particle size and charge. Screening process limited suitable stabilizers into structurally related surfactants composed of a mixture of Tween80 and Span80 at 1:1 ratio (in percent, weight/volume) in adjusted alkaline pH (named TDTSp-OH). The surfactant mixture aided the production of nanosuspensions with an average particle size of 193 ± 8 nm and with short-term stability sufficient for further processing. Solid dispersion matrices made of dried Tadalafil nanosuspensions or dried Tadalafil raw powder suspensions and PEG 4000 as a carrier were prepared by direct compression. Drying was performed via dry heat or via freeze dry. Drug release studies showed that, in general, tablet formulations made of freeze-dried product exhibited faster initial release rates than the corresponding tablets made of oven-dried products which could be attributed to possible larger crystal growth and larger crushing strengths of oven-dried formulations. At best, 60% of drug was released from solid dispersion matrices, while more than 90% of drug was released from TDTSp-OH nanosuspension within the first 5 min. In conclusion, Tadalafil nanosuspensions obtained using a mixed surfactant system provided rapid dissolution rates of Tadalafil that can theoretically enhance its bioavailability.KEY WORDS: nanosuspension, particle size, solid dispersion, stabilizer, tablets, Tadalafil     

Separation of macromolecules by ultrafiltration: Removal of poly(ethylene glycol) from human albumin

Mixtures of albumin and poly(ethylene glycol) (PEG) were used to elucidate some of the factors which influence the separation of macromolecules by thin-channel ultrafiltration. Several membranes which readily passed PEG-4000 in the absence of protein were found to exhibit increased rejection of the synthetic polymer when albumin was added to the system. Based on a comparison of filtration flux and net sieving properties, the PM-30 membrane of Amicon was chosen for further characterization. The increased rejection of PEG-4000 in the presence of albumin was independent of albumin concentration between 1 and 100 mg/ml and persisted even after albumin was removed and the system flushed with water. Overnight incubation of the membrane with trypsin restored the original sieving properties, indicating that the ‘permanent’ effects were due to irreversible adsorption to the membrane. By measuring flux over a 10⁶-fold range of albumin concentration it was possible to resolve the effects of protein adsorption, a saturable process which occurs at low protein concentration (<0.01 mg/ml), from the effects of concentration polarization which occur at high protein concentration (>0.1 mg/ml). Only the former process has an effect on the net sieving properties in this system. In spite of the adverse effects of protein adsorption, it was still possible to obtain efficient removal of PEG-4000 from albumin. Exchange of approximately 5 vols. of solvent at room temperature resulted in a 10-fold reduction in the concentration of PEG in the sample, with no loss of albumin, and no formation of albumin dimers.     

Effect of high-cell-density fermentation of Candida utilis on kinetic parameters and the shift to respiro-fermentative metabolism

In this study, biodesulfurization (BDS) was carried out using immobilized Rhodococcus erythropolis KA2-5-1 in n-tetradecane containing dibenzothiophene (DBT) as a model oil (n-tetradecane/immobilized cell biphasic system). The cells were immobilized by entrapping them with calcium alginate, agar, photo-crosslinkable resin prepolymers (ENT-4000 and ENTP-4000), and urethane prepolymers (PU-3 and PU-6); and it was found that ENT-4000-immobilized cells had the highest DBT desulfurization activity in the model oil system without leakage of cells from the support. Furthermore, ENT4000-immobilized cells could catalyze BDS repeatedly in this system for more than 900 h with reactivation; and recovery of both the biocatalyst and the desulfurized model oil was easy. This study would give a solution to the problems in BDS, such as the troublesome process of recovering desulfurized oil and the short life of BDS biocatalysts.     

Investigation of the pollen chromatin state of Hippeastrum hibridum at the early stages of development with fluorescent dye Hoechst 33342

The work was carried out on the pollen of Hippeastrum hibridum, whose size (ca 55 mcm) permits to follow both the pollen tube formation and development of the vegetative nucleus and generative cell within the first two hours before the growing point arising. Using fluorescent dye Hoechst 33342 chromatin state alterations accompanying changes in the pollen physiological state were investigated. The maximum fluorescent intensity was observed in 30 min of staining and reflected the maximum chromatin functional activity. Histograms of pollen distribution according to fluorescent intensity differ considerably with doses of irradiation (500, 1000, 2000, 3000 and 4000 Gy). Besides, a germinative index of fluorescence intensity was calculated. A comparative analysis of these data has shown that the lowest decrease in fluorescent intensity observed at 500, 3000 and 4000 Gy, was accompanied by different germinative indices. At 500 Gy, the index was 2.5 times lower than in the control, but at 4000 G no germination was not noted. The process of pollen grain development is supposed to be more intensive and faster at 500 Gy, than in the control. At 4000 Gy, a decrease in the functional pollen activity is accompanied by decrease or inhibition of chromatin functional activity.     

Characterization and isolation of intermediates in beta-lactoglobulin heat aggregation at high pH

The early stages of heat induced aggregation at 67.5 degrees C of beta-lactoglobulin were studied by combined static light scattering and size exclusion chromatography. At all conditions studied (pH 8.7 without salt and pH 6.7 with or without 60 mM NaCl) we observe metastable heat-modified dimers, trimers, and tetramers. These oligomers reach a maximum in concentration at about the time when large aggregates (1000-4000 kg/mol) appear, after which they decline in concentration. By isolating the oligomers it was demonstrated that they rapidly form aggregates upon heating in the absence of monomeric protein, showing that these species are central to the aggregation process. To our knowledge this is the first time that intermediates in protein aggregation have been isolated. At all stages of aggregation the dominant oligomer was the heat-modified dimer. Whereas the heat-modified oligomers are formed at a higher rate at pH 8.7 than at pH 6.7, the opposite is the case for the formation of aggregates from the metastable oligomers indicating cross-linking via disulfide bridges for the oligomers and noncovalent interaction in the formation of the aggregates. The data suggest that an aggregate nucleus is formed from four oligomers. For protein concentrations of 10 or 20 g/l a heat-modified monomer can be observed until about the time when the maximum in concentration appears of the heat-modified dimer. The disappearance of this heat-modified monomer correlates to the formation of dimers (trimers and tetramers).     

Palaeoecological investigations towards the reconstruction of the history of forest clearances and coastal heathlands in south-western Norway

Palynological data collected over a period of 60 years have been compiled and re-interpreted in order to reveal the patterns of deforestation and health establishment in the south-western Norwegian coastal heathland. This heathland area has been divided into four sub-regions based on topography, bedrock and drift cover. The palynological investigations are from sites with pollen source areas of different sizes. The palynological signals are interpreted in terms of models that suggest an abrupt, gradual or stepwise deforestation which can be explained by terms of different pollen source areas. The deforestation seems to have been metachronous, leading to a regional mosaic pattern of different vegetation types. The deforestation process spanned more than 3600 calendar years (4000-400 B.C.), with three pronounced clearance periods at 4000-3600 B.C. (Mesolithic/Early Neolithic transition), 2500-2200 B.C. (Middle Neolithic II/Early Late Neolithic transition), and 1900-1400 B.C. (Late Neolithic to Bronze Age period II). The expansion of heathland has also been metachronous and took place over a period of ca. 4000 years between 4000-200 B.C., but was mainly completed by the end of the Bronze Age. Regional differences in the chronology of deforestation and heathland establishment are discussed. Deforestation with subsequent heathland expansion can best be explained in terms of the interaction between land-use history, topography and edaphic conditions under climatic conditions that favoured heathland development.     

Direct gene transfer into Actinidia deliciosa protoplasts: analysis of transient expression of the CAT gene using TLC autoradiography and a GC-MS-based method

Chloramphenicol acetyl transferase (CAT) gene was used as a reporter gene to assess the conditions for polyethylene glycol (PEG)-mediated transfection of kiwifruit protoplasts. The effect of plasmid concentration and the presence of carrier DNA were each assessed by analysing CAT activity in transfected protoplasts using thin-layer chromatography (TLC) autoradiographic detection of acetylated chloramphenicol. A gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) non-radioactive method was developed for monitoring CAT gene activity. This method provides a high speed of analysis (30 min) and precise means of detecting acetylated products at the nanomolar level, enabling quantification at very low transfection rates. Using this method we optimized plasmid and PEG concentration and also assessed the effect of heat shock on transfection. The best CAT activity was obtained using 30% polyethylene glycol 4000 and by submitting protoplasts to heat shock (45 °C, 5 min) prior to transfection.     

The pressure tolerance of deep sea amphipods collected at their ambient high pressure

• 1.1. Deep sea benthic amphipods were collected at their normal ambient pressure of 394–442 atm from depths of approximately 4000 m (Parulicella caperesca, Orchomene sp. and other species).
• 2.2. Their activity at their normal pressure and temperature was observed and the responses to a standard pressure test were noted.
• 3.3. Contrary to a prediction derived from the responses of similar animals from lesser depths, the 4000 m amphipods did not convulse at high pressure although they exhibited mild hyperexcitability above 400 atm followed by a progressive inhibition of activity starting at approximately 700 atm.
• 4.4. In failing to convulse at high pressure the amphipods from 4000 m differ radically in their pressure tolerance from those which live at depths down to 2700 m.

     

Evidence for the synthesis of pro-CRF (corticotropin-releasing factor) in cultured fetal pancreatic islets of rats

Immunoreactive species extracted from cultured pancreatic fetal islets of rat have been immunoprecipitated with anti-CRF (corticotropin-releasing factor) antibody and labeled with 125I. This material was analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. These immunoreactive species corresponded to CRF-like material detected by immunocytochemistry in certain cells of the islets of Langerhans. The analysis of immunoprecipitated material showed that it contained an immunoreactive polypeptide chain of 17,000. This band corresponds to the precursor minus the signal peptide as deduced by cDNA cloning analysis. A lower molecular weight immunoreactive material was also detected, apparently derived from the precursor by peptide bond cleavage which yielded intermediate fragments. These bands disappeared and generated a Mr 4000 when the corresponding species, fractionated by Sephadex G-25 column, were incubated with isolated islet extracts at pH 5.5. In isolated islets from 3-day-old rat, only the Mr 17,000 and 4000 species appeared. These results suggest strongly that CRF is synthesized in situ and that the conversion process could involve a sequential rather than a single cleavage of pro-CRF. The major end product was probably CRF, whereas intermediate forms seem to carry an NH2 terminal extension of CRF.     

Metals and altitude drive genetic diversity of chironomids in Andean streams

相似文献   

The location of a disulfonic stilbene binding site in band 3, the anion transport protein of the red blood cell membrane

The binding site for 4,4′-diisothiocyano-2,2′-stilbenedisulfonic acid, a specific, potent, irreversible inhibitor of anion transport in red blood cells is located in a 15 000 dalton transmembrane segment of band 3, produced by chymotrypsin treatment of ghosts stripped of extrinsic proteins. The segment was cleaved into three fragments of 7000, 4000 and 4000 daltons by CNBr. The C-terminus of the segment is located in the 7000 dalton fragment; the N-terminus in one of the 4000 dalton fragments; and the binding site for 4,4′-diisothiocyano-2,2′-stilbenedisulfonic acid in the middle 4000 dalton fragment. The latter was cleaved by $\text{N-}\text{bromosuccinimide}$ into two fragments of 2000 daltons. The binding site for 4,4′-diisothiocyano-2,2′-stilbenedisulfonic acid was located on the fragment containing the newly formed N-terminus. It is concluded that the binding site is located about 9000 daltons from the C-terminus (at the outside face of the membrane) and 6000 daltons from the N-terminus (at the cytoplasmic face). In view of the existing evidence that the binding site may be located near the outside face of the membrane, it is suggested that the 15 000 dalton segment is folded, so that it crosses the bilayer three times.     

One-step transformation of the dimorphic yeast Yarrowia lipolytica

An efficient one-step transformation method for the dimorphic yeast Yarrowia lipolytica is described. Using cells grown overnight on agar plates, the whole process is carried out within 1 h. The transformant clones could be recovered on selective plates as early as 36–48 h after plating. The efficiency was better than 10⁵ transformants/μg replicative plasmid DNA. Effects of cell density, dithiothreitol, heat shock, poly(ethylene glycol) 4000 concentration and the wetness of selective plates were investigated. Received: 17 February 1997 / Received revision: 4 April 1997 / Accepted: 19 April 1997     

Purification,crystallization, and preliminary crystallographic analysis of 3-deoxy-D-arabino-heptulosonate-7-phosphate synthase from Escherichia coli

The phenylalanine-regulated isozyme of 3-deoxy-D-arabino-heptulosonate-7-phosphate- synthase (DAHPS) from Escherichia coli, its binary complexes with either substrate, phosphoenolpyruvate (PEP), or feedback inhibitor, Phe, and its ternary complexes with either PEP or Phe plus metal cofactor (either Mn²⁺, Cd²⁺, or Pb²⁺) were crystallized from polyethylglycol (PEG) solutions. All crystals of the DAHPS without Phe belong to space group C2, with cell parameters a = 213.5 Å, b = 54.3 Å, c = 149.0 Å, β = 116.6°. All crystals of the enzyme with Phe also belong to space group C2, but with cell parameters a = 297.1 Å, b = 91.4 Å, c = 256.5 Å, and β = 148.2°.     

Active internal waters in the bacteriorhodopsin photocycle. A comparative study of the L and M intermediates at room and cryogenic temperatures by infrared spectroscopy

We present time-resolved room-temperature infrared difference spectra for the bacteriorhodopsin (bR) photocycle at 8 cm (-1) spectral and 5 micros temporal resolution, from 4000 to 800 cm (-1). An in situ hydration method allowed for a controlled and stable sample hydration (92% relative humidity), largely improving the quality of the data without affecting the functionality of bR. Experiments in both H 2 (16)O and H 2 (18)O were conducted to assign bands to internal water molecules. Room-temperature difference spectra of the L and M intermediates minus the bR ground state (L-BR and M-BR, respectively) were comprehensively compared with their low-temperature counterparts. The room-temperature M-BR spectrum was almost identical to that obtained at 230 K, except for a continuum band. The continuum band contains water vibrations from this spectral comparison between H 2 (16)O and H 2 (18)O, and no continuum band at 230 K suggests that the protein/solvent dynamics are insufficient for deprotonation of the water cluster. On the other hand, an intense positive broadband in the low-temperature L-BR spectrum (170 K) assigned to the formation of a water cavity in the cytoplasmic domain is absent at room temperature. This water cavity, proposed to be an essential feature for the formation of L, seems now to be a low-temperature artifact caused by restricted protein dynamics at 170 K. The observed differences between low- and room-temperature FTIR spectra are further discussed in light of previously reported dynamic transitions in bR. Finally, we show that the kinetics of the transient heat relaxation of bR after photoexcitation proceeds as a thermal diffusion process, uncorrelated with the photocycle itself.     

酰化人红细胞超氧化物歧化酶稳定性的研究

用月桂酸对人红细胞超氧化物歧化酶（ｈ－ＳＯＤ）进行化学修饰得到酰化ｈ－ＳＯＤ（Ａｃ－ｈＳＯＤ）,并对Ａｃ－ｈＳＯＤ和ｈ－ＳＯＤ的稳定性进行了比较。结果表明：Ａｃ－ｈＳＯＤ活力为ｈ－ＳＯＤ的７２％。比活力为４０００Ｕ／ｍｇ,Ａｃ－ｈＳＯＤ的热稳定性、酸碱稳定性及抗蛋白酶水解能力均比天然酶提高。     

Isolation of a novel pentachlorophenol-degrading bacterium, Pseudomonas sp. Bu34

A pentachlorophenol (PCP)-degrading bacterium was isolated from possible PCP-contaminated soil from Pusan, Korea and identified as a member of the genus Pseudomonas. It used PCP as its sole source of carbon and energy. This micro-organism was capable of degrading PCP more effectively, certified by the increase in cell density and the decrease in PCP substrate. Pseudomonas sp. Bu34 was able to degrade a much higher concentration of PCP (4000 mg l⁻¹) than any previously reported PCP-degrading bacteria and fungi and to grow in mineral salts solution containing one of a variety of chlorophenols. In non-acclimated strain Bu34, the cell number decreased from 87 to 99·9% in 75–4000 mg l⁻¹ PCP at 24 h. In the acclimated strain the PCP toxic effect did not appear with 75 mg l⁻¹ PCP treatment, but 1000–4000 mg l⁻¹ PCP decreased the cell number of strain Bu34 by 25% to 24 h and then the cell number slightly increased at 48 h. Therefore, it suggested that the maximum resistance of acclimated strain Bu34 to PCP was 4000 mg l⁻¹ PCP. We suggest that strain Bu34 could be used as a micro-organism for the bioremediation of highly PCP-contaminated soils, water or wood products.     

Ultraviolet‐B‐driven pigmentation and genetic diversity of benthic macroinvertebrates from high‐altitude Andean streams

相似文献   

穴居狼蛛毒的某些组分对培养的人肺腺癌细胞(SPC-A1)的致伤作用

本实验观察了从新疆产穴居狼蛛（Lycosa singoriensis）的冻干毒腺中提取的粗毒及其经Sephadex G-25柱层析分离所得到的各组分对培养的人肺腺癌细胞的杀伤作用：①与对政党人胚的肺细胞、正常人淋巴细胞和红细胞相比,穴居狼蛛毒对培养的SPC-A1有明显的高杀伤作用。例如用于杀伤50%的SPC-A1细胞所需的粗毒浓度为25 μg/ml,而用于杀伤相同量正常人胚肺细胞和淋巴细胞所需的粗毒浓度分别为600-500 μg/ml,即使将粗毒浓度提高到2000 μg/ml,也只能杀伤40%左右的正常人的红细胞。②在粗毒的8个分离组分中,第Ⅲ、Ⅵ和Ⅷ组分表现出杀伤SPC-A1细胞的活性,尤以后两者为明显。③粗毒经100 ℃加热30分钟后,杀伤SPC-A1细胞的活力稍有下降,但组分Ⅳ和Ⅷ经同样的加温处理后,该活性不变,唯组分Ⅲ在加温后该活性完全丧失。