The molecular relatedness among alpha-hemolytic plasmids from various incompatibility groups

Deoxyribonucleic acid (DNA) reassociation studies among α-hemolytic (Hly) plasmids from FVI and FIII–IV incompatibility groups showed a close similarity between the nucleotide sequences of plasmids from the same group. With respect to R plasmids from the F overgroup, they have 20–26 Mdal in common, an amount of DNA close to the amount involved in the traF operon. No more extensive sequence homology was found between pSU316 (IncFIII–IV) and the incompatible plasmids ColB-K98 (IncFIII) or R124 (IncFIV). The IncIα I2 plasmid pSU5 has only the α-hemolytic region (5 Mdal) in common with plasmid pSU316 but it is much more closely related to IncFVI plasmids where the DNA in common amounts to 22 Mdal. Finally, the genetically unrelated plasmid pSU233 shares 66% of its nucleotide sequences (40 Mdal) with the IncFVI plasmids and has 16–23 Mdal in common with various F-like plasmids.     

Incompatibility properties of the IncFIII/FIV haemolytic plasmid pSU316 when integrated in the Escherichia coli chromosome

The haemolytic plasmid pSU316 is incompatible with members of the IncFIII and IncFIV incompatibility groups. Plasmid pSU307 (pSU316 hlyC::Tn5) was inserted by integrative suppression into the chromosome of JW112, a temperature-sensitive dnaA mutant of Escherichia coli. The incompatibility properties of this strain (SU51) were studied and it was found that: (1) plasmid pSU306 (pSU316 hlyA::Tn802) was rapidly lost from strain SU51 both at 30 degrees C and 42 degrees C; (2) the IncFIII plasmid pSU397 (ColB-K98::Tn802) was lost from strain SU51 and at 42 degrees C but not at 30 degrees C; and (3) the IncFIV plasmid R124 was stably maintained in strain SU51 at both temperatures. Revertants of pSU307 to the autonomous state could be obtained from SU51. These revertants exerted incompatibility towards the prototype plasmids pSU306, pSU397 and R124 in the same way as pSU307 itself. Thus, strain SU51 provided a suitable method for distinguishing the three different incompatibility determinants of plasmid pSU316.     

Incompatibility among alpha-hemolytic plasmids studied after inactivation of the alpha-hemolysin gene by transposition of Tn802.

Five α-hemolytic plasmids were studied with respect to their molecular and genetic properties. Their molecular weights ranged from 48 to 93 Mdal. Digestion with HindIII restriction endonuclease indicated that they were all clearly different plasmids although similarities in their band patterns were observed. Plasmids pSU1, pSU105, and pSU316 produce F-like pili. Incompatibility studies between Hly plasmids were prevented by lack of markers other than α-hemolysin production. In order to overcome this problem, the inactivating properties of the transposable element Tn802 were used. Several Hly plasmids that have lost the ability to produce α-hemolysin were isolated after insertion of the ampicillin transposon Tn802. Incompatibility between the parental plasmids and their Tn802 derivatives suggests that α-hemolytic plasmids have spread over, at least, four incompatibility groups. Plasmids pSU1 and pSU105 were found to be incompatible with Hly-P212, the only representative, so far, of IncFVI. Plasmid pSU316 was incompatible both with ColB-K98 and R124, which suggests the existance of a FIII-FIV incompatibility complex. In addition, pSU5 and pSU233 were compatible with each other and with pSU316, pSU1, pSU105, and Hly-P212. They also produce a different type of pili from this test plasmids.     

Sa/I restriction endonuclease maps of FII incompatibility group R plasmids.

SalI restriction endonuclease maps of FII incompatibility group R plasmids NR1, NR84, and R6 have been determined by sequential digestion of plasmid DNA with EcoRI and SalI and subsequent analysis of the fragments by electrophoresis on agarose gels. In the composite R plasmid NR1 there are five SalI sites, one in the r-determinants component and four in the RTF-Tc component. SalI cleavage of transitioned NR1 DNA, which contains tandem sequences of the r-determinants in a head-to-tail orientation, produces the five original bands plus a single new amplified band whose mobility on agarose gels corresponds to the monomer r-determinants DNA. NR84 has a total of four SalI sites. It is missing one of the SalI sites near the repA locus. R6 has five SalI sites, four the same as those of NR84, and one additional site within the Km transposon Tn601.     

Genetics of the replication and maintenance functions of the hemolytic plasmid pSU316. Cloning of an IncFIII determinant

Two miniplasmids have been constructed from pSU306, a Tn802 insertion derivative of the IncFIII-IncFIV hemolytic plasmid pSU316. One of these, pSU3027, is a low copy number plasmid expressing both IncFIII and IncFIV incompatibilities, but is rather unstable, and probably lacks a putative par gene. The other, pSU3025, is maintained in about 340 copies per genome equivalent and expresses only IncFIII incompatibility. Most of the PstI-generated fragments from pSU3027 have been cloned in pBR322. One of the resulting plasmids, pSU3135, contains an insertion of 0.5 kb in the vector molecule, and expresses IncFIII, but not the IncFIV incompatibility. These results allowed us to identify and locate several genes involved in the control of pSU316 replication and stable plasmid maintenance.     

Relationship of the replication and incompatibility genes of an IncFVI haemolysin plasmid with other F-like haemolysin plasmids

The replication and incompatibility region of the IncFVI plasmid pSU502 has been isolated by in vitro DNA manipulation as part of a 12.6 kb plasmid, denominated pSU503. Plasmid pSU503 was strongly incompatible with its parental plasmid, pSU1, but was fully compatible with the haemolytic plasmids pSU316 (IncFIII/IV), pHly152 (IncI2) and pSU233 (Inc-pSU233). Furthermore, the 6.9 kb EcoRI fragment of pSU503 which carries the replication and incompatibility determinants of pSU1 did not show any detectable homology (less than 70%) with any of the haemolysin-determining plasmids with which it is compatible. Thus, homologous haemolysin determinants have become linked to apparently unrelated replicons.     

Physical mapping of homologous segments of mitochondrial episomes from S male-sterile maize

Restriction endonuclease maps of two double-stranded plasmid-like DNAs, 6180 and 5175 bp each, isolated as linear molecules from the mitochondria of S-type cytoplasmic male-sterile maize were prepared. Twelve cleavage sites were mapped in each using HindIII, XhoI, EcoRI, SacI, XbaI, SalI, BamHI, and BstEII. BamHI does not cleave S-1 DNA and SalI does not cleave S-2 DNA. A 1150-bp homologous sequence in addition to the 200-bp terminal inverted repeats was terminally oriented on both DNAs by reciprocal hybridization and heteroduplex analysis.     

Identification and expression of a copy number control gene in the IncFIII hemolytic plasmid pSU316.

A DNA fragment carrying both the IncFIII determinant and a copy number control gene of the hemolytic plasmid pSU316 has been cloned in pBR322. Deletion derivatives of the hybrid plasmid generated by Bal 31 digestion, which no longer exhibit the IncFIII phenotype, fall into two complementation groups when tested against a pSU316 miniplasmid derivative. Type 1 mutants exhibit the copy number control (Cop+) phenotype whereas type 2 mutants do not. Restriction analysis of type 1 and type 2 mutants allowed us to locate the cop gene of pSU316 in a 700-base-pair fragment adjacent to the IncFIII determinant. Plasmid expression in a minicell system suggests that the product of the cop gene of pSU316 could be a 13,000-dalton protein.     

Incompatibility among α-hemolytic plasmids studied after inactivation of the α-hemolysin gene by transposition of Tn802

Five α-hemolytic plasmids were studied with respect to their molecular and genetic properties. Their molecular weights ranged from 48 to 93 Mdal. Digestion with HindIII restriction endonuclease indicated that they were all clearly different plasmids although similarities in their band patterns were observed. Plasmids pSU1, pSU105, and pSU316 produce F-like pili. Incompatibility studies between Hly plasmids were prevented by lack of markers other than α-hemolysin production. In order to overcome this problem, the inactivating properties of the transposable element Tn802 were used. Several Hly plasmids that have lost the ability to produce α-hemolysin were isolated after insertion of the ampicillin transposon Tn802. Incompatibility between the parental plasmids and their Tn802 derivatives suggests that α-hemolytic plasmids have spread over, at least, four incompatibility groups. Plasmids pSU1 and pSU105 were found to be incompatible with Hly-P212, the only representative, so far, of IncFVI. Plasmid pSU316 was incompatible both with ColB-K98 and R124, which suggests the existance of a FIII-FIV incompatibility complex. In addition, pSU5 and pSU233 were compatible with each other and with pSU316, pSU1, pSU105, and Hly-P212. They also produce a different type of pili from this test plasmids.     

Analysis of IncF plasmids evolution: nucleotide sequence of an IncFIII replication region

We determined the nucleotide sequence of RepFIII, the IncFIII replication region of the plasmid pSU316. Our data confirmed that RepFIII belongs to the RepFIIA family. The comparison of the nucleotide sequences from several RepFIIA-family plasmids revealed that pSU316 and R1 replicons are almost identical (96% similarity). Most of the differences between them are clustered in the incompatibility determinant. Analysis of the rest of the sequence suggested that the divergence between R1 and pSU316 replicons is very recent.     

Plasmid pEA566 from Erwinia aroideae

A new plasmid designated pEA566 was isolated from Erwinia aroideae. The molecular weight of the plasmid, as determined by neutral and alkaline sucrose gradient centrifugation, electron microscopy, and agarose gel electrophoresis, was 6.6 × 10⁶. The plasmid replicated under relaxed control, had three cleavage sites for KpnI restriction endonuclease, and no sites for EcoRI, BamHI, SalI, PstI, and HindIII.     

Purification of alpha-hemolysin from an overproducing E. coli strain

Summary The genetic determinant of the -hemolysin encoded by plasmid pHly152 has been cloned in both orientations in plasmid pBR322 giving rise to plasmids pSU157 and pSU158. E. coli strains carrying either of these recombinant Hly plasmids produced about 20 times more hemolysin activity than the parental plasmid pHly152, when grown in minimal medium supplemented with hemoglobin. Thus high hemolytic activity is not lethal to the cells, contrary to previous assumptions.-hemolysin was purified from culture supernatants of strain SU100 (pSU157) by ammonium sulfate precipitation and gel filtration in Sephacryl S-200 in the presence of 6 M urea. When purified -hemolysin preparations were subjected to electrophoretic analysis in denaturing conditions, a single 107 kdal polypeptide was observed. This probably corresponds to the -hemolysin protein, since an isogenic E. coli strain carrying plasmid pSU161, an Hly^- mutant derivative of pSU157, did not synthesize the 107 kdal polypeptide.     

Hemolysis determinant common to Escherichia coli hemolytic plasmids of different incompatibility groups

By using cloned deoxyribonucleic acid fragments from the hemolysis determinant of the hemolytic plasmid pHly152 as hybridization probes, a deoxyribonucleic acid segment of about 3.8 megadaltons was identified as a common sequence in several hemolytic (Hly) plasmids of Escherichia coli belonging in four different incompatibility groups. This segment contained the genetic information for the synthesis and secretion of the extracellular toxin alpha-hemolysin of E. coli. With the exception of pSU5, representing a composite plasmid, one part of which seems to be very similar to pHly152, the overall sequence homology of these Hly plasmids with pHly152 seems to be rather restricted. However, the Hly plasmid pSU316 showed sequence homology with pHly152 that did not extend beyond the hemolysis determinant. The two other plasmids, pSU233 and pSU105, also shared homology with pHly152 in the hemolysis determinant as well as in various other parts of this plasmid which did not seem to be directly linked to the hemolysis determinant. This suggests that the hemolysis determinant has spread to presumably unrelated plasmids of E. coli.     

Physical characterization of plasmids from Streptomyces kasugaensis MB273

Plasmid DNA of molecular weight 6.8 × 10⁶ was isolated from Streptomyces kasugaensis MB273. The plasmid DNA showed a single CsCl-ethidium bromide density gradient centrifugation, in neutral sucrose gradient centrifugation, and in agarose gel electrophoresis. When this DNA was digested with BamHI or SalI endonucleases, an unexpected number of fragments were found on agarose gel electrophoresis. Molecular weight summation of fragments obtained from double restriction enzyme digestions suggested that the plasmid DNA was a mixture of two different plasmids. This was confirmed by constructing recombinant plasmids between S. kasugaensis plasmid DNA and pBR322, and then by isolating two plasmids after SalI endonuclease treatment followed by sucrose gradient centrifugation. One of the plasmids (pSK1) had a single recognition site for BamHI, EcoRI, and SalI, and three sites for BglII. The other plasmid (pSK2) had a single recognition site for EcoRI and BglII, two recognition sites for BamHI, and no cleavage site for SalI. The cleavage maps of these plasmids were constructed using several restriction endonucleases.     

Physical map of DNA from a new cauliflower mosaic virus strain

The restriction enzymes AluI, BamHI, BglII, EcoRI, HindIII, and SalI have been used to characterize and map a new cauliflower mosaic virus strain (Cabb-S). These fragments have been ordered by examining their overlapping regions after double enzymatic digestion. The single SalI cleavage site was chosen as the point of origin. We compare this strain with those already described.     

Cloning and expression of the SalI restriction-modification genes of Streptomyces albus G

Summary The Streptomyces albus G genes (salR and salM) for the class II restriction enzyme SalI (SalGI) and its cognate modification enzyme were cloned in Streptomyces lividans 66. Selection was initially for the salR gene. From a library of S. albus G DNA in the high copy number plasmid pIJ486 several clones of S. lividans were obtained that were resistant to phage C31 unmodified at the many SalI sites in its DNA, but were sensitive to modified phages last propagated on a restriction-deficient, modification-proficient mutant of S. albus G. SalI activity was detected in cell-free extracts of the clones, though only at levels comparable with that in S. albus G. Five different recombinant plasmids were isolated, with inserts of 5.6, 5.7, 8.9, 10 and 18.9 kb that contained a common region of 4.5 kb. These plasmids could not be digested by SalI, although the vector has four recognition sites for this enzyme, indicating that the salM gene was also cloned and expressed. Subcloning experiments in S. lividans indicated the approximate location of salR and salM, and in Escherichia coli led to detectable expression of salM but not of salR. A variety of previously isolated S. albus G mutants affected in aspects of SalI-specific restriction and modification were complemented by the cloned DNA; they included a mutant temperature-sensitive for growth apparently because of a mutation in salM. Southern blotting showed that DNA homologous to the cloned sal genes was present in Xanthomonas and Rhodococcus strains, but not detectably in Herpetosiphon strains, all of which produce SalI isoschizomers.     

Cloning and characterization of the gene for Salmonella typhimurium serine hydroxymethyltransferase

A plasmid containing the glyA gene of Salmonella typhimurium LT2 was constructed in vitro using plasmid pACYC184 as the cloning vector and a λgt7-glyA transducing phage as the source of glyA DNA. The recombinant plasmid (pGS30) contains a 10-kb EcoRI insert fragment. Genetic and biochemical experiments established that the fragment contains a functional glyA gene. From plasmid pGS30 we subcloned a 4.4-kb SalI-EcoRI fragment containing the glyA gene and its neighboring regions (plasmid pGS38). The location and orientation of the glyA gene within the 4.4-kb insert fragment was determined in four ways: (1) comparison of the physical map of the 4.4-kb SalI-EcoRI fragment with the physical map of a 2.6-kb SalI-PvuII fragment that carries the Escherichia coli glyA gene; (2) deletion analysis; (3) transposon Tn5 insertional inactivation experiments; (4) deoxyribonucleic acid sequencing and comparison of the S. typhimurium DNA sequence with the E. coli DNA sequence. A presumptive glyA-encoded polypeptide of M_r 47000 was detected using plasmid pGS38 as template in a minicell system, but not when the glyA gene was inactivated by insertion of a Tn5 element.     

Restriction map of bacteriophage SP02: ordering the SacI fragments and identification of the DNA termini

A plasmid that is able to replicate in both Escherichia coli and Streptococcus sanguis has been constructed by the in vitro joining of the pACYC184 (Cm^r Tc^r) and pVA749 (Em^r) replicons. This plasmid, designated pVA838, is 9.2 kb in size and expresses Em^r in both E. coli and S. sanguis. Its Cm^r marker is expressed only in E. coli and may be inactivated by addition of DNA inserts at its internal EcoRI or PvuII sites. The pVA838 molecule also contains unique SalI, SphI, BamHI, NruI and XbaI cleavage sites suitable for molecular cloning. pVA838 may be amplified in E. coli but not in S. sanguis. We have used the pVA838 plasmid as a shuttle vector to clone streptococcai plasmid fragments in E. coli. Such chimeras isolated from E. coli were readily introduced into S. sanguis by transformation.     

The Constituents of the Essential Oil from Litsea japonica (Thunb.) Juss., FRUIT

Tetragenococcus halophila D10 decarboxylates aspartate to alanine, but T. halophila D10 derivatives generated by a curing treatment could not (Asd^- derivatives). We observed by electrophoresis three plasmid bands in T. halophila D10; all Asd^- derivatives lost the largest of these bands. This plasmid, pD1, has two SalI sites. We cloned and sequenced the 10 kb SalI fragment. The DNA sequence suggests that this fragment contains the aspartate decarboxylating trait.     

Cloning and Expression of the Pseudomonas Gene for Utilization of d-Leucine in Escherichia coli

Two genes of Pseudomonas putida (IFO 12996) which code for enzymes participating in amino acid metabolism, were cloned in Escherichia coli C600 using pBR322 as a vector. pST7549 is a 7.9 kb hybrid plasmid DNA which is composed of four SalI fragments (0.3, 1.4, 1.9 and 4.3 kb), and codes for β-isopropylmalate dehydrogenase (EC 1.1.1.85) in l-leucine biosynthesis. The enzyme activity in the crude extract from E. coli C600 bearing pST7549 was 80 ~ 90% lower than that of E. coli K12 or P. putida. When the foreign SalI fragments derived from P. putida were subcloned, a 1.9 kb SalI fragment was found to encode β-isopropylmalate dehydrogenase and it did not contain the promoter of P. putida DNA. Plasmid pST6961 has a 1.8 kb insert derived from the P. putida DNA in the SalI site of pBR322. E. coli cells carrying this recombinant plasmid show no leucine racemase activity and no d-leucine transaminase activity, but five-times higher d-leucine oxidation activity than the host strain, E. coli. Enzymological studies have suggested that plasmid pST6961 codes for d-amino acid dehydrogenase, a key enzyme in d-amino acid metabolism.