Conservation of essential design features in coiled coil silks

Silks are strong protein fibers produced by a broad array of spiders and insects. The vast majority of known silks are large, repetitive proteins assembled into extended beta-sheet structures. Honeybees, however, have found a radically different evolutionary solution to the need for a building material. The 4 fibrous proteins of honeybee silk are small ( approximately 30 kDa each) and nonrepetitive and adopt a coiled coil structure. We examined silks from the 3 superfamilies of the Aculeata (Hymenoptera: Apocrita) by infrared spectroscopy and found coiled coil structure in bees (Apoidea) and in ants (Vespoidea) but not in parasitic wasps of the Chrysidoidea. We subsequently identified and sequenced the silk genes of bumblebees, bulldog ants, and weaver ants and compared these with honeybee silk genes. Each species produced orthologues of the 4 small fibroin proteins identified in honeybee silk. Each fibroin contained a continuous predicted coiled coil region of around 210 residues, flanked by 23-160 residue length N- and C-termini. The cores of the coiled coils were unusually rich in alanine. There was extensive sequence divergence among the bee and ant silk genes (<50% similarity between the alignable regions of bee and ant sequences), consistent with constant and equivalent divergence since the bee/ant split (estimated to be 155 Myr). Despite a high background level of sequence diversity, we have identified conserved design elements that we propose are essential to the assembly and function of coiled coil silks.     

Identification of four major hornet silk genes with a complex of alanine-rich and serine-rich sequences in Vespa simillima xanthoptera Cameron

Hornet silk, a fibrous protein in the cocoon produced by the larva of the vespa, is composed of four major proteins. In this study, we constructed silk-gland cDNA libraries from larvae of the hornet Vespa simillima xanthoptera Cameron and deduced the full amino acid sequences of the four hornet silk proteins, which were named Vssilk 1-4 in increasing order of molecular size. Portions of the amino acid sequences of the four proteins were confirmed by Matrix-assisted laser desorption/ionization-time of flight/mass spectrometry (MALDI-TOF/MS) and N-terminal protein sequencing. The primary sequences of the four Vssilk proteins (1-4) were highly divergent, but the four proteins had some common properties: (i) the amino acid compositions of all four proteins were similar to each other in that the well-defined and characteristic repetitive patterns present in most of the known silk proteins were absent; and (ii) the characteristics of the amino acid sequences of the four proteins were also similar in that Ser-rich structures such as sericin were localized at both ends of the chains and Ala-rich structures such as fibroin were found in the center. These characteristic primary structures might be responsible for the coexisting alpha-helix and beta-sheet conformations that make up the unique secondary structure of hornet silk proteins in the native state. Because heptad repeat sequences of hydrophobic residue are present in the Ala-rich region, we believe that the Ala-rich region of hornet silk predominantly forms a coiled coil with an alpha-helix conformation.     

Phylogenetic occurrence of coiled coil proteins: Implications for tissue structure in metazoa via a coiled coil tissue matrix

We examined GenBank sequence files with a heptad repeat analysis program to assess the phylogenetic occurrence of coiled coil proteins, how heptad repeat domains are organized within them, and what structural/functional categories they comprise. Of 102,007 proteins analyzed, 5.95% (6,074) contained coiled coil domains; 1.26% (1,289) contained “extended” (> 75 amino acid) domains. While the frequency of proteins containing coiled coils was surprisingly constant among all biota, extended coiled coil proteins were fourfold more frequent in the animal kingdom and may reflect early events in the divergence of plants and animals. Structure/function categories of extended coils also revealed phylogenetic differences. In pathogens and parasites, many extended coiled coil proteins are external and bind host proteins. In animals, the majority of extended coiled coil proteins were identified as constituents of two protein categories: 1) myosins and motors; or 2) components of the nuclear matrix-intermediate filament scaffold. This scaffold, produced by sequential extraction of epithelial monolayers in situ, contains only 1–2% of the cell mass while accurately retaining morphological features of living epithelium and is greatly enriched in proteins with extensive, interrupted coiled coil forming domains. The increased occurrence of this type of protein in Metazoa compared with plants or protists leads us to hypothesize a tissue-wide matrix of coiled coil interactions underlying metazoan differentiated cell and tissue structure.     

Evidence of α-helical coiled coils and β-sheets in hornet silk

α-Helical coiled coil and β-sheet complexes are essential structural building elements of silk proteins produced by different species of the Hymenoptera. Beside X-ray scattering at wide and small angles we applied cryo-electron diffraction and microscopy to demonstrate the presence and the details of such structures in silk of the giant hornet Vespa mandarinia japonica. Our studies on the assembly of the fibrous silk proteins and their internal organization in relation to the primary chain structure suggest a 172 Å pitch supercoil consisting of four intertwined alanine-rich α-helical strands. The axial periodicity may adopt even multiples of the pitch value. Coiled coil motifs form the largest portion of the hornet silk structure and are aligned nearly parallel to the cocoon fiber axis in the same way as the membrane-like parts of the cocoon are molecularly orientated in the spinning direction. Supercoils were found to be associated with β-crystals, predominantly localized in the l-serine-rich chain sequences terminating each of the four predominant silk proteins. Such β-sheet blocks are considered resulting from transformation of random coil molecular sequences due to the action of elongational forces during the spinning process.     

Conformation change of hornet silk proteins in the solid phase in response to external stimulation

Hornet silks adopt a variety of morphology such as fibers, sponge, films, and gels depending on the preparation methods. We have studied the conformation change of hornet silk proteins (Vespa mandarina) as regenerated films, using chiroptical spectrophotometer universal chiroptical spectrophotometer 1, which can measure true circular dichroism spectra without artifact signals that are intrinsic to solid‐state samples. The spectra showed that the proteins in films alter the conformation rapidly from the α‐helix to the coiled coil and then to a β‐sheet structure in response to heat/moisture treatment, but the transformation stopped at the coiled coil state when the sample was soaked in EtOH/water solution. Water is required for the α‐helix to the coiled coil transition, and extra energy is required for the further transition to a β‐sheet structure. This is the first successful circular dichroism study of fibril silk proteins to follow the conformation changes in the solid state. This work shows that proteins can undergo conformational changes easily even in the solid phase in response to external stimuli, and this can be traced by solid‐phase‐feasible chiroptical spectrophotometers. Application of unnatural stress to proteins gives valuable insights into their structure and characteristics.     

Structural mapping of the coiled‐coil domain of a bacterial condensin and comparative analyses across all domains of life suggest conserved features of SMC proteins

The structural maintenance of chromosomes (SMC) proteins form the cores of multisubunit complexes that are required for the segregation and global organization of chromosomes in all domains of life. These proteins share a common domain structure in which N‐ and C‐ terminal regions pack against one another to form a globular ATPase domain. This “head” domain is connected to a central, globular, “hinge” or dimerization domain by a long, antiparallel coiled coil. To date, most efforts for structural characterization of SMC proteins have focused on the globular domains. Recently, however, we developed a method to map interstrand interactions in the 50‐nm coiled‐coil domain of MukB, the divergent SMC protein found in γ‐proteobacteria. Here, we apply that technique to map the structure of the Bacillus subtilis SMC (BsSMC) coiled‐coil domain. We find that, in contrast to the relatively complicated coiled‐coil domain of MukB, the BsSMC domain is nearly continuous, with only two detectable coiled‐coil interruptions. Near the middle of the domain is a break in coiled‐coil structure in which there are three more residues on the C‐terminal strand than on the N‐terminal strand. Close to the head domain, there is a second break with a significantly longer insertion on the same strand. These results provide an experience base that allows an informed interpretation of the output of coiled‐coil prediction algorithms for this family of proteins. A comparison of such predictions suggests that these coiled‐coil deviations are highly conserved across SMC types in a wide variety of organisms, including humans. Proteins 2015; 83:1027–1045. © 2015 Wiley Periodicals, Inc.     

Insertion of the membrane-proximal region of the neuronal SNARE coiled coil into the membrane

In the neuron, soluble N-ethylmaleimide-sensitive factor attachment protein receptor (SNARE) proteins assemble into an alpha-helical coiled coil that bridges the synaptic vesicle to the plasma membrane and drives membrane fusion, a required process for neurotransmitter release at the nerve terminal. How does coiled coil formation drive membrane fusion? To investigate the structural and energetic coupling between the coiled coil and membrane, the recombinant SNARE complex in the phospholipid bilayer was studied using fluorescence quenching and site-directed spin labeling EPR. Fluorescence analysis revealed that two native Trp residues at the membrane-proximal region of the coiled coil are inserted into the membrane, tightly coupling the coiled coil to the membrane. The EPR results indicate that the coiled coil penetrates into the membrane with an oblique angle, providing a favorable geometry for the basic residues to interact with negatively charged lipids. The result supports the proposition that core complex formation directly leads to the apposition of two membranes, which could facilitate lipid mixing. Trp residues and basic residues are abundant at the membrane-proximal region of transmembrane SNARE proteins, suggesting the generality of the proposed mechanism for the SNARE complex-membrane coupling.     

Crystal structure of a super leucine zipper,an extended two‐stranded super long coiled coil

Coiled coil is a ubiquitous structural motif in proteins, with two to seven alpha helices coiled together like the strands of a rope, and coiled coil folding and assembly is not completely understood. A GCN4 leucine zipper mutant with four mutations of K3A, D7A, Y17W, and H18N has been designed, and the crystal structure has been determined at 1.6 Å resolution. The peptide monomer shows a helix trunk with short curved N‐ and C‐termini. In the crystal, two monomers cross in 35° and form an X‐shaped dimer, and each X‐shaped dimer is welded into the next one through sticky hydrophobic ends, thus forming an extended two‐stranded, parallel, super long coiled coil rather than a discrete, two‐helix coiled coil of the wild‐type GCN4 leucine zipper. Leucine residues appear at every seventh position in the super long coiled coil, suggesting that it is an extended super leucine zipper. Compared to the wild‐type leucine zipper, the N‐terminus of the mutant has a dramatic conformational change and the C‐terminus has one more residue Glu 32 determined. The mutant X‐shaped dimer has a large crossing angle of 35° instead of 18° in the wild‐type dimer. The results show a novel assembly mode and oligomeric state of coiled coil, and demonstrate that mutations may affect folding and assembly of the overall coiled coil. Analysis of the formation mechanism of the super long coiled coil may help understand and design self‐assembling protein fibers.     

Invited review the coiled coil silk of bees, ants, and hornets

In this article, we review current knowledge about the silk produced by the larvae of bees, ants, and hornets [Apoidea and Vespoidea: Hymenoptera]. Different species use the silk either alone or in composites for a variety of purposes including mechanical reinforcement, thermal regulation, or humidification. The characteristic molecular structure of this silk is α-helical proteins assembled into tetrameric coiled coils. Gene sequences from seven species are available, and each species possesses a copy of each of four related silk genes that encode proteins predicted to form coiled coils. The proteins are ordered at multiple length scales within the labial gland of the final larval instar before spinning. The insects control the morphology of the silk during spinning to produce either fibers or sheets. The silk proteins are small and non repetitive and have been produced artificially at high levels by fermentation in E. coli. The artificial silk proteins can be fabricated into materials with structural and mechanical properties similar to those of native silks.     

Influence of a heptad repeat stutter on the pH‐dependent conformational behavior of the central coiled‐coil from influenza hemagglutinin HA2

The coiled‐coil is one of the most common protein structural motifs. Amino acid sequences of regions that participate in coiled‐coils contain a heptad repeat in which every third then forth residue is occupied by a hydrophobic residue. Here we examine the consequences of a “stutter,” a deviation of the idealized heptad repeat that is found in the central coiled‐coil of influenza hemagluttinin HA2. Characterization of a peptide containing the native stutter‐containing HA2 sequence, as well as several variants in which the stutter was engineered out to restore an idealized heptad repeat pattern, revealed that the stutter is important for allowing coiled‐coil formation in the WT HA2 at both neutral and low pH (7.1 and 4.5). By contrast, all variants that contained idealized heptad repeats exhibited marked pH‐dependent coiled‐coil formation with structures forming much more stably at low pH. A crystal structure of one variant containing an idealized heptad repeat, and comparison to the WT HA2 structure, suggest that the stutter distorts the optimal interhelical core packing arrangement, resulting in unwinding of the coiled‐coil superhelix. Interactions between acidic side chains, in particular E69 and E74 (present in all peptides studied), are suggested to play a role in mediating these pH‐dependent conformational effects. This conclusion is partially supported by studies on HA2 variant peptides in which these positions were altered to aspartic acid. These results provide new insight into the structural role of the heptad repeat stutter in HA2. Proteins 2014; 82:2220–2228. © 2014 Wiley Periodicals, Inc.     

蛋白质结构中卷曲螺旋的研究进展

卷曲螺旋 (coiledcoil)是存在于多种天然蛋白质中的结构模式 .近年来 ,通过对天然蛋白质中卷曲螺旋结构以及根据已有知识设计合成的卷曲螺旋结构的研究 ,已基本掌握了这类结构模式的特点 ,并将特异的卷曲螺旋结构应用于生化分析、工业、医药卫生等领域 .本文主要从天然蛋白质中卷曲螺旋的主要存在形式及其生物学功能、卷曲螺旋的主要结构特点、影响卷曲螺旋稳定性和结构特异性的因素、卷曲螺旋结构设计及其应用以及今后卷曲螺旋研究的主要发展方向等几个方面对近年来卷曲螺旋结构的研究进展情况进行了综述 .     

Structure and properties of silk hydrogels

Control of silk fibroin concentration in aqueous solutions via osmotic stress was studied to assess relationships to gel formation and structural, morphological, and functional (mechanical) changes associated with this process. Environmental factors potentially important in the in vivo processing of aqueous silk fibroin were also studied to determine their contributions to this process. Gelation of silk fibroin aqueous solutions was affected by temperature, Ca(2+), pH, and poly(ethylene oxide) (PEO). Gelation time decreased with increase in protein concentration, decrease in pH, increase in temperature, addition of Ca(2+), and addition of PEO. No change of gelation time was observed with the addition of K(+). Upon gelation, a random coil structure of the silk fibroin was transformed into a beta-sheet structure. Hydrogels with fibroin concentrations >4 wt % exhibited network and spongelike structures on the basis of scanning electron microscopy. Pore sizes of the freeze-dried hydrogels were smaller as the silk fibroin concentration or gelation temperature was increased. Freeze-dried hydrogels formed in the presence of Ca(2+) exhibited larger pores as the concentration of this ion was increased. Mechanical compressive strength and modulus of the hydrogels increased with increase in protein concentration and gelation temperature. The results of these studies provide insight into the sol-gel transitions that silk fibroin undergoes in glands during aqueous processing while also providing important insight in the in vitro processing of these proteins into useful new materials.     

Engineering of the hydrophobic core of an alpha-helical coiled coil

The amino acid sequence that forms the alpha-helical coiled coil structure has a representative heptad repeat denoted by defgabc, according to their positions. Although the a and d positions are usually occupied by hydrophobic residues, hydrophilic residues at these positions sometimes play important roles in natural proteins. We have manipulated a few amino acids at the a and d positions of a de novo designed trimeric coiled coil to confer new functions to the peptides. The IZ peptide, which has four heptad repeats and forms a parallel triple-stranded coiled coil, has Ile at all of the a and d positions. We show three examples: (1) the substitution of one Ile at either the a or d position with Glu caused the peptide to become pH sensitive; (2) the metal ion induced alpha-helical bundles were formed by substitutions with two His residues at the d and a positions for a medium metal ion, and with one Cys residue at the a position for a soft metal ion; and (3) the AAB-type heterotrimeric alpha-helical bundle formation was accomplished by a combination of Ala and Trp residues at the a positions of different peptide chains. Furthermore, we applied these procedures to prepare an ABC-type heterotrimeric alpha-helical bundle and a metal ion-induced heterotrimeric alpha-helical bundle.     

Self‐association of TPR domains: Lessons learned from a designed,consensus‐based TPR oligomer

The tetratricopeptide repeat (TPR) motif is a protein–protein interaction module that acts as an organizing centre for complexes regulating a multitude of biological processes. Despite accumulating evidence for the formation of TPR oligomers as an additional level of regulation there is a lack of structural and solution data explaining TPR self‐association. In the present work we characterize the trimeric TPR‐containing protein YbgF, which is linked to the Tol system in Gram‐negative bacteria. By subtracting previously identified TPR consensus residues required for stability of the fold from residues conserved across YbgF homologs, we identified residues involved in oligomerization of the C‐terminal YbgF TPR domain. Crafting these residues, which are located in loop regions between TPR motifs, onto the monomeric consensus TPR protein CTPR3 induced the formation of oligomers. The crystal structure of this engineered oligomer shows an asymmetric trimer where stacking interactions between the introduced tyrosines and displacement of the C‐terminal hydrophilic capping helix, present in most TPR domains, are key to oligomerization. Asymmetric trimerization of the YbgF TPR domain and CTPR3Y3 leads to the formation of higher order oligomers both in the crystal and in solution. However, such open‐ended self‐association does not occur in full‐length YbgF suggesting that the protein's N‐terminal coiled‐coil domain restricts further oligomerization. This interpretation is borne out in experiments where the coiled‐coil domain of YbgF was engineered onto the N‐terminus of CTPR3Y3 and shown to block self‐association beyond trimerization. Our study lays the foundations for understanding the structural basis for TPR domain self‐association and how such self‐association can be regulated in TPR domain‐containing proteins. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

The coiled-coil trigger site of the rod domain of cortexillin I unveils a distinct network of interhelical and intrahelical salt bridges

BACKGROUND: The parallel two-stranded alpha-helical coiled coil is the most frequently encountered subunit-oligomerization motif in proteins. The simplicity and regularity of this motif have made it an attractive system to explore some of the fundamental principles of protein folding and stability and to test the principles of de novo design. RESULTS: The X-ray crystal structure of the 18-heptad-repeat alpha-helical coiled-coil domain of the actin-bundling protein cortexillin I from Dictyostelium discoideum is a tightly packed parallel two-stranded alpha-helical coiled coil. It harbors a distinct 14-residue sequence motif that is essential for coiled-coil formation, and is a prerequisite for the assembly of cortexillin I. The atomic structure reveals novel types of ionic coiled-coil interactions. In particular, the structure shows that a characteristic interhelical and intrahelical salt-bridge pattern, in combination with the hydrophobic interactions occurring at the dimer interface, is the key structural feature of its coiled-coil trigger site. CONCLUSIONS: The knowledge gained from the structure could be used in the de novo design of alpha-helical coiled coils for applications such as two-stage drug targeting and delivery systems, and in the design of coiled coils as templates for combinatorial helical libraries in drug discovery and as synthetic carrier molecules.     

Contribution of DEAF1 structural domains to the interaction with the breast cancer oncogene LMO4

The proteins LMO4 and DEAF1 contribute to the proliferation of mammary epithelial cells. During breast cancer LMO4 is upregulated, affecting its interaction with other protein partners. This may set cells on a path to tumour formation. LMO4 and DEAF1 interact, but it is unknown how they cooperate to regulate cell proliferation. In this study, we identify a specific LMO4-binding domain in DEAF1. This domain contains an unstructured region that directly contacts LMO4, and a coiled coil that contains the DEAF1 nuclear export signal (NES). The coiled coil region can form tetramers and has the typical properties of a coiled coil domain. Using a simple cell-based assay, we show that LMO4 modulates the activity of the DEAF NES, causing nuclear accumulation of a construct containing the LMO4-interaction region of DEAF1.     

Silk from crickets: a new twist on spinning

Raspy crickets (Orthoptera: Gryllacrididae) are unique among the orthopterans in producing silk, which is used to build shelters. This work studied the material composition and the fabrication of cricket silk for the first time. We examined silk-webs produced in captivity, which comprised cylindrical fibers and flat films. Spectra obtained from micro-Raman experiments indicated that the silk is composed of protein, primarily in a beta-sheet conformation, and that fibers and films are almost identical in terms of amino acid composition and secondary structure. The primary sequences of four silk proteins were identified through a mass spectrometry/cDNA library approach. The most abundant silk protein was large in size (300 and 220 kDa variants), rich in alanine, glycine and serine, and contained repetitive sequence motifs; these are features which are shared with several known beta-sheet forming silk proteins. Convergent evolution at the molecular level contrasts with development by crickets of a novel mechanism for silk fabrication. After secretion of cricket silk proteins by the labial glands they are fabricated into mature silk by the labium-hypopharynx, which is modified to allow the controlled formation of either fibers or films. Protein folding into beta-sheet structure during silk fabrication is not driven by shear forces, as is reported for other silks.     

Structure-function evolution of the Transforming acidic coiled coil genes revealed by analysis of phylogenetically diverse organisms

Background  

Examination of ancient gene families can provide an insight into how the evolution of gene structure can relate to function. Functional homologs of the evolutionarily conserved transforming acidic coiled coil (TACC) gene family are present in organisms from yeast to man. However, correlations between functional interactions and the evolution of these proteins have yet to be determined.