High-level expression of the <Emphasis Type="Italic">Penicillium notatum</Emphasis> glucose oxidase gene in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using codon optimization

The glucose oxidase (GOD) gene from Penicillium notatum was expressed in Pichia pastoris. The 1,815 bp gene, god-w, encodes 604 amino acids. Recombinant GOD-w had optimal activity at 35–40°C and pH 6.2 and was stable, from pH 3 to 7 maintaining >75% maximum activity after incubation at 50°C for 1 h. GOD-w worked as well as commercial GODs to improve bread making. To achieve high-level expression of recombinant GOD in P. pastoris, 272 nucleotides involving 228 residues were mutated, consistent with the codon bias of P. pastoris. The optimized recombinant GOD-m yielded 615 U ml⁻¹ (2.5 g protein l⁻¹) in a 3 l fermentor—410% higher than GOD-w (148 U ml⁻¹), and thus is a low-cost alternative for the bread baking industry.     

High expression of recombinant <Emphasis Type="Italic">Streptomyces</Emphasis> sp. S38 xylanase in <Emphasis Type="Italic">Pichia pastoris</Emphasis> by codon optimization and analysis of its biochemical properties

In recent years, the biotechnological use of xylanases has grown remarkably. To efficiently produce xylanase for food processing and other industry, a codon-optimized recombinant xylanase gene from Streptomyces sp. S38 was synthesized and extracellularly expressed in Pichia pastoris under the control of AOX1 promoter. SDS-PAGE and activity assay demonstrated that the molecular mass of the recombinant xylanase was estimated to be 25 kDa, the optimum pH and optimum temperature were 5.5 and 50°C, respectively. In shake flask culture, the specific activity of the xylanase activity was 5098.28 U/mg. The K _m and V _max values of recombinant xylanase were 11.0 mg/ml and 10000 μmol min⁻¹ mg⁻¹, respectively. In the presence of metal ions such as Ca²⁺, Cu²⁺, Cr³⁺ and K⁺, the activity of the enzyme increased. However, strong inhibition of the enzyme activity was observed in the presence of Hg²⁺. This is the first report on the expression properties of a recombinant xylanase gene from the Streptomyces sp. S38 using Pichia pastoris. The attractive biochemical properties of the recombinant xylanase suggest that it may be a useful candidate for variety of commercial applications.     

Heterologous expression of polyhydroxyalkanoate depolymerase from <Emphasis Type="Italic">Thermobifida</Emphasis> sp. in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and catalytic analysis by surface plasmon resonance

A polyhydroxyalkanote depolymerase gene from Thermobifida sp. isolate BCC23166 was cloned and expressed as a C-terminal His₆-tagged fusion in Pichia pastoris. Primary structure analysis revealed that the enzyme PhaZ-Th is a member of a proposed new subgroup of SCL-PHA depolymerase containing a proline–serine repeat linker. PhaZ-Th was expressed as two glycosylated forms with apparent molecular weights of 61 and 70 kDa, respectively. The enzyme showed esterase activity toward p-nitrophenyl alkanotes with V _max and K _m of 3.63 ± 0.16 μmol min⁻¹ mg⁻¹ and 0.79 ± 0.12 mM, respectively, on p-nitrophenyl butyrate with optimal activity at 50–55°C and pH 7–8. Surface plasmon resonance (SPR) analysis demonstrated that PhaZ-Th catalyzed the degradation of poly-[(R)-3-hydroxybutyrate] (PHB) films, which was accelerated in (R)-3-hydroxyvalerate copolymers with a maximum degradation rate of 882 ng cm⁻² h⁻¹ for poly[(R)-3-hydroxybutyrate-co-3-hydroxyvalerate] (12 mol% V). Surface deterioration, especially on the amorphous regions of PHB films was observed after exposure to PhaZ-Th by atomic force microscopy. The use of P. pastoris as an alternative recombinant system for bioplastic degrading enzymes in secreted form and a sensitive SPR analytical technique will be of utility for further study of bioplastic degradation.     

Enhanced fructooligosaccharides and inulinase production by a <Emphasis Type="Italic">Xanthomonas campestris</Emphasis> pv. <Emphasis Type="Italic">phaseoli</Emphasis> KM 24 mutant

Xanthomonas campestris pv phaseoli produced an extracellular endoinulinase (9.24 ± 0.03 U mL⁻¹) in an optimized medium comprising of 3% sucrose and 2.5% tryptone. X. campestris pv. phaseoli was further subjected to ethylmethanesulfonate mutagenesis and the resulting mutant, X. campestris pv. phaseoli KM 24 demonstrated inulinase production of 22.09 ± 0.03 U mL⁻¹ after 18 h, which was 2.4-fold higher than that of the wild type. Inulinase production by this mutant was scaled up using sucrose as a carbon source in a 5-L fermenter yielding maximum volumetric (21,865 U L⁻¹ h⁻¹) and specific (119,025 U g⁻¹ h⁻¹) productivities of inulinase after 18 h with an inulinase/invertase ratio of 2.6. A maximum FOS production of 11.9 g L⁻¹ h⁻¹ and specific productivity of 72 g g⁻¹ h⁻¹ FOS from inulin were observed in a fermenter, when the mutant was grown on medium containing 3% inulin and 2.5% tryptone. The detection of mono- and oligosaccharides in inulin hydrolysates by TLC analysis indicated the presence of an endoinulinase. This mutant has potential for large-scale production of inulinase and fructooligosaccharides.     

A Novel Phytase appA from <Emphasis Type="Italic">Citrobacter amalonaticus</Emphasis> CGMCC 1696: Gene Cloning and Overexpression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A novel phytase gene appA, with upstream and downstream sequences from Citrobacter amalonaticus CGMCC 1696, was cloned by degenerate polymerase chain reaction (PCR), and thermal asymmetric interlaced (TAIL) PCR and was overexpressed in Pichia pastoris. Sequence analysis revealed one open reading frame that consisted of 1311 bp encoding a 436–amino-acid protein, which had a deduced molecular mass of 46.3 kDa. The phytase appA belongs to the histidine acid phosphatase family and exhibits the highest identity (70.1%) with C. braakii phytase. The gene was overexpressed in P. pastoris. The secretion yield of recombinant appA protein was accumulated to approximately 4.2 mg·mL⁻¹, and the enzyme activity level reached 15,000 U·mL⁻¹, which is higher than any previous reports. r-appA was glycosylated, as shown by Endo H treatment. r-appA was purified and characterized. The specific activity of r-appA for sodium phytate was 3548 U·mg⁻¹. The optimum pH and temperature for enzyme activity were 4.5 and 55°C, respectively. r-appA was highly resistant to pepsin or trypsin treatment. This enzyme could be an economic and efficient alternative to the phytases currently used in the feed industry.     

High-level heterologous expression of an alkaline lipase gene from <Emphasis Type="Italic">Penicillium cyclopium</Emphasis> PG37 in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A 777-bp cDNA fragment encoding a mature alkaline lipase (LipI) from Penicillium cyclopium PG37 was amplified by RT–PCR, and inserted into the expression plasmid pPIC9 K. The recombinant plasmid, designated as pPIC9 K-lipI, was linearized with SalI and transformed into Pichia pastoris GS115 (his4, Mut⁺) by electroporation. MD plate and YPD plates containing G418 were used for screening of the multi-copy P. pastoris transformants (His⁺, Mut⁺). One transformant resistant to 4.0 mg/ml of G418, numbered as P. pastoris GSL4-7, expressing the highest recombinant LipI (rLipI) activity was chosen for optimizing expression conditions. The integration of the gene LipI into the P. pastoris GS115 genome was confirmed by PCR analysis using 5′- and 3′-AOX1 primers. SDS–PAGE and lipase activity assays demonstrated that the rLipI, a glycosylated protein with an apparent molecular weight of about 31.5 kDa, was extracellularly expressed in P. pastoris. When the P. pastoris GSL4-7 was cultured under the optimized conditions, the expressed rLipI activity was up to 407 U/ml, much higher than that (10.5 U/ml) expressed with standard protocol. The rLipI showed the highest activity at pH 10.5 and 25°C, and was stable at a broad pH range of 7.0–10.5 and at a temperature of 30°C or below.     

Heterologous expression and characterization of <Emphasis Type="Italic">Bacillus coagulans</Emphasis><Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase

Bacillus coagulans has been of great commercial interest over the past decade owing to its strong ability of producing optical pure l-lactic acid from both hexose and pentose sugars including l-arabinose with high yield, titer and productivity under thermophilic conditions. The l-arabinose isomerase (L-AI) from Bacillus coagulans was heterologously over-expressed in Escherichia coli. The open reading frame of the L-AI has 1,422 nucleotides encoding a protein with 474 amino acid residues. The recombinant L-AI was purified to homogeneity by one-step His-tag affinity chromatography. The molecular mass of the enzyme was estimated to be 56 kDa by SDS-PAGE. The enzyme was most active at 70°C and pH 7.0. The metal ion Mn²⁺ was shown to be the best activator for enzymatic activity and thermostability. The enzyme showed higher activity at acidic pH than at alkaline pH. The kinetic studies showed that the K _m, V _max and k _cat/K _m for the conversion of l-arabinose were 106 mM, 84 U/mg and 34.5 mM⁻¹min⁻¹, respectively. The equilibrium ratio of l-arabinose to l-ribulose was 78:22 under optimal conditions. l-ribulose (97 g/L) was obtained from 500 g/l of l-arabinose catalyzed by the enzyme (8.3 U/mL) under the optimal conditions within 1.5 h, giving at a substrate conversion of 19.4% and a production rate of 65 g L⁻¹ h⁻¹.     

Large-scale production of tannase using the yeast <Emphasis Type="Italic">Arxula adeninivorans</Emphasis>

Tannase (tannin acyl hydrolase, EC 3.1.1.20) hydrolyses the ester and depside bonds of gallotannins and gallic acid esters and is an important industrial enzyme. In the present study, transgenic Arxula adeninivorans strains were optimised for tannase production. Various plasmids carrying one or two expression modules for constitutive expression of tannase were constructed. Transformant strains that overexpress the ATAN1 gene from the strong A. adeninivorans TEF1 promoter produce levels of up to 1,642 U L⁻¹ when grown in glucose medium in shake flasks. The effect of fed-batch fermentation on tannase productivity was then investigated in detail. Under these conditions, a transgenic strain containing one ATAN1 expression module produced 51,900 U of tannase activity per litre after 142 h of fermentation at a dry cell weight of 162 g L⁻¹. The highest yield obtained from a transgenic strain with two ATAN1 expression modules was 31,300 U after 232 h at a dry cell weight of 104 g L⁻¹. Interestingly, the maximum achieved yield coefficients [Y(P/X)] for the two strains were essentially identical.     

Cloning and characterization of a chitinase gene <Emphasis Type="Italic">Lbchi31</Emphasis> from <Emphasis Type="Italic">Limonium bicolor</Emphasis> and identification of its biological activity

Chitinases are digestive enzymes that break down glycosidic bonds in chitin. In the current study, an endochitinase gene Lbchi31 was cloned from Limonium bicolor. The cDNA sequence of Lbchi31 was 1,107 bp in length, encoding 322 amino acid residues with a calculated molecular mass of 31.7 kDa. Clustal analysis showed that there was a highly conserved chitin-binding domains in Lbchi31 protein, containing four sulfide bridges. The Lbchi31 gene was inserted into the pPIC9 vector and transferred into yeast Pichia pastoris GS115 and KM71 for heterologous expression. The transformant harboring the Lbchi31 gene showed a clearly visible protein band with a molecular mass of more than 31 kDa in the SDS-PAGE gel, indicating that it had been translated in P. pastoris. Enzyme characterization showed that the optimal reaction condition for chitinase LbCHI31 activity was: 40°C, pH of 5.0 and 5 mmol l⁻¹ of Mn²⁺. The maximum enzyme activity was 0.88 U ml⁻¹ following exposure to the cell wall chitin of Valsa sordida. The LbCHI31 enzyme can efficiently degrade cell wall chitin of the phytopathogenic Rhizoctonia solani, Fusarium oxysporum, Sclerotinia sclerotiorum, V. sordida, Septoria tritici and Phytophthora sojae, suggesting that it has the biocontrol function to fungal phytopathogen.     

Expression,characterization and 2,4,6-trichlorophenol degradation of laccase from <Emphasis Type="Italic">Monilinia fructigena</Emphasis>

A novel laccase gene from Monilinia fructigena was synthesized chemically according to the yeast bias codon and integrated into the genome of Pichia pastoris GS115 by electroporation. The expressed enzyme was recovered from the culture supernatant and purified. The result of enzyme activity assay and SDS-PAGE demonstrated that the recombinant laccase was induced and extracellularly expressed in P. pastoris. Main biochemical properties of this laccase, such as thermodependence and thermostability, optimal pH and pH stability, and the effect of metal ions and inhibitors, were characterized. With 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulfonate (ABTS) as the substrate, MfLcc had its optimal pH at 3.5 and optimal temperature at 45°C. The Km values of the ABTS, guaiacol were 0.012 and 0.016 Mm, respectively, and the corresponding V _max values are 243.9 and 10.55 Um min⁻¹ mg⁻¹, respectively. The recombinant laccase degraded 80% 2,4,6-trichlorophenol after 8 h under the optimal conditions. The recombinant strain and its laccase can be considered as candidate for treating waste water polluted with trichlorophenols.     

Enhanced production of GDP-<Emphasis Type="SmallCaps">l</Emphasis>-fucose by overexpression of NADPH regenerator in recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

Biosynthesis of guanosine 5′-diphosphate-l-fucose (GDP-l-fucose) requires NADPH as a reducing cofactor. In this study, endogenous NADPH regenerating enzymes such as glucose-6-phosphate dehydrogenase (G6PDH), isocitrate dehydrogenase (Icd), and NADP⁺-dependent malate dehydrogenase (MaeB) were overexpressed to increase GDP-l-fucose production in recombinant Escherichia coli. The effects of overexpression of each NADPH regenerating enzyme on GDP-l-fucose production were investigated in a series of batch and fed-batch fermentations. Batch fermentations showed that overexpression of G6PDH was the most effective for GDP-l-fucose production. However, GDP-l-fucose production was not enhanced by overexpression of G6PDH in the glucose-limited fed-batch fermentation. Hence, a glucose feeding strategy was optimized to enhance GDP-l-fucose production. Fed-batch fermentation with a pH-stat feeding mode for sufficient supply of glucose significantly enhanced GDP-l-fucose production compared with glucose-limited fed-batch fermentation. A maximum GDP-l-fucose concentration of 235.2 ± 3.3 mg l⁻¹, corresponding to a 21% enhancement in the GDP-l-fucose production compared with the control strain overexpressing GDP-l-fucose biosynthetic enzymes only, was achieved in the pH-stat fed-batch fermentation of the recombinant E. coli overexpressing G6PDH. It was concluded that sufficient glucose supply and efficient NADPH regeneration are crucial for NADPH-dependent GDP-l-fucose production in recombinant E. coli.     

Secretory expression and characterization of a soluble laccase from the <Emphasis Type="Italic">Ganoderma lucidum</Emphasis> strain 7071-9 in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

Laccases are strong oxidizing enzymes that oxidize chlorinated phenols, synthetic dyes, pesticides, polycyclic aromatic hydrocarbons as well as a very wide range of other compounds with high redox potential. Based on the bias of genetic codons between fungus and yeast, we synthesized a laccase gene GlLCCI, originated from Ganoderma lucidum using optimized codons and a PCR-based two-step DNA synthesis method. The recombinant laccase, GlLCCI was successfully over-expressed in yeast, Pichia pastoris, with an alcohol oxidase1 promoter. The recombinant GlLCCI has a molecular mass of approximately 58 kDa. The K _m values of GlLCCI for 2-2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) and guaiacol were 0.9665, and 1.1122 mM, respectively. The V _max of GlLCCI for both substrates was 3,024 and 82.13 μM mg⁻¹ min⁻¹. When ABTS was used as a substrate, the enzyme had an optimal temperature of approximately 55°C. The enzyme was detected over pH values from 2 to 8. The enzyme was strongly activated by K⁺, Na⁺, Cu²⁺ and mannitol. Six amino acids (alanine, histidine, glycine, arginine, aspartate and phenylalanine) increased the catalytic ability of the enzyme. The activity of laccase was obviously inhibited by Fe²⁺, Fe³⁺, sodium hydrosulphite, and sodium azide. Additionally, under optimal conditions, GlLCCI decolorized 37.62 mg l⁻¹ of azo dye methyl orange (MO) in cultural medium. With a high MO degradation ability, GlLCCI may have potential in the treatment of industrial effluent containing azo dye MO.     

Alginate production and <Emphasis Type="Italic">alg8</Emphasis> gene expression by <Emphasis Type="Italic">Azotobacter vinelandii</Emphasis> in continuous cultures

Alginates are polysaccharides that are used as thickening agents, stabilizers, and emulsifiers in various industries. These biopolymers are produced by fermentation with a limited understanding of the processes occurring at the cellular level. The objective of this study was to evaluate the effects of agitation rate and inlet sucrose concentrations (ISC) on alginate production and the expression of the genes encoding for alginate-lyases (algL) and the catalytic subunit of the alginate polymerase complex (alg8) in chemostat cultures of Azotobacter vinelandii ATCC 9046. Increased alginate production (2.4 g l⁻¹) and a higher specific alginate production rate (0.1 g g⁻¹ h⁻¹) were obtained at an ISC of 15 g l⁻¹. Carbon recovery of about 100% was obtained at an ISC of 10 g l⁻¹, whereas it was close to 50% at higher ISCs, suggesting that cells growing at lower sucrose feed rates utilize the carbon source more efficiently. In each of the steady states evaluated, an increase in algL gene expression was not related to a decrease in alginate molecular weight, whereas an increase in the molecular weight of alginate was linked to higher alg8 gene expression, demonstrating a relationship between the alg8 gene and alginate polymerization in A. vinelandii for the first time. The results obtained provide a possible explanation for changes observed in the molecular weight of alginate synthesized and this knowledge can be used to build a recombinant strain able to overexpress alg8 in order to produce alginates with higher molecular weights.     

<Emphasis Type="Italic">Agrobacterium</Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>-mediated transformation of callus cells of <Emphasis Type="Italic">Crataegus</Emphasis><Emphasis Type="Italic">aronia</Emphasis>

A genetic transformation system has been developed for callus cells of Crataegus aronia using Agrobacterium tumefaciens. Callus culture was established from internodal stem segments incubated on Murashige and Skoog (MS) medium supplemented with 5 mg l⁻¹ Indole-3-butyric acid (IBA) and 0.5 mg l⁻¹ 6-benzyladenine (BA). In order to optimize the callus culture system with respect to callus growth and coloration, different types and concentrations of plant growth regulators were tested. Results indicated that the best average fresh weight of red colored callus was obtained on MS medium supplemented with 2 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) and 1.5 mg l⁻¹ kinetin (Kin) (callus maintenance medium). Callus cells were co-cultivated with Agrobacterium harboring the binary plasmid pCAMBIA1302 carrying the mgfp5 and hygromycin phosphotransferase (hptII) genes conferring green fluorescent protein (GFP) activity and hygromycin resistance, respectively. Putative transgenic calli were obtained 4 weeks after incubation of the co-cultivated explants onto maintenance medium supplemented with 50 mg l⁻¹ hygromycin. Molecular analysis confirmed the integration of the transgenes in transformed callus. To our knowledge, this is the first time to report an Agrobacterium-mediated transformation system in Crataegus aronia.     

Benzyladenine Promotes Flowering in <Emphasis Type="Italic">Doritaenopsis</Emphasis> and <Emphasis Type="Italic">Phalaenopsis</Emphasis> Orchids

Two experiments were performed to determine how application of the cytokinin benzyladenine (BA) influenced flowering in Doritaenopsis and Phalaenopsis orchid clones. In the first experiment, two vegetative orchid clones growing in 15-cm pots were transferred from a 28°C greenhouse that inhibited flowering to a 23°C greenhouse for flower induction (day 0). A foliar spray (0.2 L m⁻²) containing BA at 100, 200, or 400 mg L⁻¹ or 25, 50, or 100 mg L⁻¹ each of BA and gibberellins A₄ + A₇ (BA+GA) was applied on days 0, 7, and 14. Plants treated with BA alone at 200 or 400 mg L⁻¹ had a visible inflorescence 3–9 days earlier and had a mean of 0.7–3.5 more inflorescences and 3–8 more flowers per plant than nontreated plants. The application of BA+GA had no effect on inflorescence number and total flower number at the rates tested. In the second experiment, three orchid clones received a single foliar spray of BA at 200 mg L⁻¹ at six time points relative to time of transfer from 29°C to 23°C (−1, 0, +1, +2, +4, or +6 weeks). A separate group of plants received a BA application at week 0 but was maintained at 29°C. Inflorescence number was greatest in all three orchid clones when plants were treated with BA 1 week after the temperature transfer. Plants that were sprayed with BA and maintained at 29°C did not initiate inflorescences. The promotion of flowering by the application of BA suggests that cytokinins at least partially regulate inflorescence initiation of Doritaenopsis and Phalaenopsis, but its promotion is conditional and BA application cannot completely substitute for an inductive low temperature.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine from glycerol by a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

The production of l-phenylalanine is conventionally carried out by fermentations that use glucose or sucrose as the carbon source. This work reports on the use of glycerol as an inexpensive and abundant sole carbon source for producing l-phenylalanine using the genetically modified bacterium Escherichia coli BL21(DE3). Fermentations were carried out at 37°C, pH 7.4, using a defined medium in a stirred tank bioreactor at various intensities of impeller agitation speeds (300–500 rpm corresponding to 0.97–1.62 m s⁻¹ impeller tip speed) and aeration rates (2–8 L min⁻¹, or 1–4 vvm). This highly aerobic fermentation required a good supply of oxygen, but intense agitation (impeller tip speed ~1.62 m s⁻¹) reduced the biomass and l-phenylalanine productivity, possibly because of shear sensitivity of the recombinant bacterium. Production of l-phenylalanine was apparently strongly associated with growth. Under the best operating conditions (1.30 m s⁻¹ impeller tip speed, 4 vvm aeration rate), the yield of l-phenylalanine on glycerol was 0.58 g g⁻¹, or more than twice the best yield attainable on sucrose (0.25 g g⁻¹). In the best case, the peak concentration of l-phenylalanine was 5.6 g L⁻¹, or comparable to values attained in batch fermentations that use glucose or sucrose. The use of glycerol for the commercial production of l-phenylalanine with E. coli BL21(DE3) has the potential to substantially reduce the cost of production compared to sucrose- and glucose-based fermentations.     

High level expression of a recombinant phospholipase C from <Emphasis Type="Italic">Bacillus cereus</Emphasis> in <Emphasis Type="Italic">Bacillus subtilis</Emphasis>

Twenty-two Bacillus cereus strains were screened for phospholipase C (PLC, EC 3.1.4.3) activity using p-nitrophenyl phosphorylcholine as a substrate. Two strains (B. cereus SBUG 318 and SBUG 516) showed high activity at elevated temperatures (>70°C) at acidic pH (pH 3.5–6) and were selected for cloning and functional expression using Bacillus subtilis. The genes were amplified from B. cereus DNA using primers based on a known PLC sequence and cloned into the expression vector pMSE3 followed by transformation into B. subtilis WB800. On the amino acid level, one protein (PLC318) was identical to a PLC described from B. cereus, whereas PLC516 contained an amino acid substitution (E173D). PLC production using the recombinant strains was performed by an acetoin-controlled expression system. For PLC516, 13.7 U g⁻¹ wet cell weight was determined in the culture supernatant after 30 h cultivation time. Three purification steps resulted in pure PLC516 with a specific activity of 13,190 U mg⁻¹ protein.     

Expression,characterization, and antimicrobial ability of T4 lysozyme from methylotrophic yeast <Emphasis Type="Italic">Hansenula polymorpha</Emphasis> A16

Lysozyme is an enzyme that is essential for protection against bacterial infections. In this study, a T4 lysozyme gene was cloned into the yeast expression vector pPIC9K under the control of the Pichia pastoris glyceraldehyde-3-phosphate dehydrogenase promoter (pGAP). A Hansenula polymorpha-derived ribosomal DNA (rDNA)-targeting element was inserted into the expression vector and was critical for stable DNA integration into the H. polymorpha chromosome. Recombinant T4 lysozyme was successfully expressed in the yeast H. polymorpha A16; 0.49 g L⁻¹ secreted recombinant T4 lysozyme was obtained 72 h after incubation in culture broth that had an initial pH of 6.0. Recombinant T4 lysozyme showed lytic activity against the cell walls of the gram positive bacteria, Micrococcus lysodeikticus, and the gram negative bacteria Xanthomonas campestris pv. malvacearum and Xanthomonas oryzae pv. oryzae. The zone of inhibition assay was used to evaluate antimicrobial activity. Mass spectrometry showed the N-terminal sequence of recombinant T4 lysozyme was identical to that of the native enzyme. SDS-PAGE indicated that the molecular mass of recombinant T4 lysozyme was 18.7 kD which corresponds to a monomer of the native enzyme. SDS-PAGE without 0.2 mol L⁻¹ dithiothreitol treatment detected two bands (15 and 31 kD) suggesting that some recombinant T4 lysozyme formed inter- and intra-molecular disulfide bonds which resulted in loss of enzyme activity.     

Construction,expression and characterization of fusion enzyme from <Emphasis Type="Italic">Arthrobacter oxydans</Emphasis> dextranase and <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> amylase

An artificial fusion protein of Arthrobacter oxydans dextranase and Klebsiella pneumoniae α-amylase was constructed and expressed in Escherichia coli. Most of the expressed protein existed as an insoluble fraction, which was solubilized with urea. The purified fusion enzyme electrophoretically migrated as a single protein band; M = 137 kDa, and exhibited activities of both dextranase (10.8 U mg⁻¹) and amylase (7.1 U mg⁻¹), which were lower than that of reference dextranase (13.3 U mg⁻¹) and α-amylase (103 U mg⁻¹). The fusion enzyme displayed bifunctional enzyme activity at pH 5–7 at 37°C. These attributes potentially make the fusion enzyme more convenient for use in sugar processing than a two-enzyme system.