Structural requirements for interruption of protein translocation across rough endoplasmic reticulum membrane

Co-translational translocation of proteins across the membrane of rough endoplasmic reticulum (ER) is interrupted by particular amino acid sequences, which are functionally termed "stop-transfer sequence." We analyzed the structural requirements for the interruption of the peptide translocation. By the manipulation of the cDNA of interleukin 2 (IL2), which passes through ER membrane co-translationally, the middle portion of the IL2 molecule was replaced with systematically altered hydrophobic segments, leucine, alanine, or leucine/alanine mixed clusters. Furthermore, charged amino acid residues were introduced just downstream of the hydrophobic segments. These modified IL2 peptides were synthesized with wheat germ cell-free system in the presence of rough microsomes and the topology of the peptides in the microsomes was assessed by post-translational digestion with proteinase K. We obtained the following results. (i) Each modified protein was processed to the mature form but the extent of stop-translocation varied widely. The ratio of the stopped to the translocated products increased as the length and hydrophobicity of the inserted segment increased. (ii) Shorter hydrophobic segments than naturally occurring native transmembrane segment promoted stop-translocation. (iii) Proteins with hydrophobic segments followed by positive charges were more efficiently stop-translocated than those having negative charges. (iv) If the hydrophobicity of the segment was sufficiently high, the positive charges after the segment were not essential for stop-translocation. We also suggest that the stop-transfer process includes protein-protein interaction between the hydrophobic segment and translocation channel.     

Charged Amino Acids in a Preprotein Inhibit SecA-Dependent Protein Translocation

Sec translocase catalyzes membrane protein insertion and translocation. We have introduced stretches of charged amino acid residues into the preprotein proOmpA and have analyzed their effect on in vitro protein translocation into Escherichia coli inner membrane vesicles. Both negatively and positively charged amino acid residues inhibit translocation of proOmpA, yielding a partially translocated polypeptide chain that blocks the translocation site and no longer activates preprotein-stimulated SecA ATPase activity. Stretches of positively charged residues are much stronger translocation inhibitors and suppressors of the preprotein-stimulated SecA ATPase activity than negatively charged residues. These results indicate that both clusters of positively and negatively charged amino acids are poor substrates for the Sec translocase and that this is reflected by their inability to stimulate the ATPase activity of SecA.     

Positive Charges of Translocating Polypeptide Chain Retrieve an Upstream Marginal Hydrophobic Segment from the Endoplasmic Reticulum Lumen to the Translocon

Positively charged amino acid residues are well recognized topology determinants of membrane proteins. They contribute to the stop-translocation of a polypeptide translocating through the translocon and to determine the orientation of signal sequences penetrating the membrane. Here we analyzed the function of these positively charged residues during stop-translocation in vitro. Surprisingly, the positive charges facilitated membrane spanning of a marginally hydrophobic segment, even when separated from the hydrophobic segment by 70 residues. In this case, the hydrophobic segment was exposed to the lumen, and then the downstream positive charges triggered the segment to slide back into the membrane. The marginally hydrophobic segment spanned the membrane, but maintained access to the water environment. The positive charges not only fix the hydrophobic segment in the membrane at its flanking position, but also have a much more dynamic action than previously realized.     

Negatively charged residues in the IgM stop-transfer effector sequence regulate transmembrane polypeptide integration

A non-hydrophobic sequence that contributes to the biogenesis of a transmembrane protein is termed a stop-transfer effector (STE). To examine the mechanism of STE-mediated stop-transfer, a series of fusion proteins were constructed containing variants of a putative STE from murine IgM fused to an otherwise translocated hydrophobic sequence. Unexpectedly, the fraction of molecules adopting transmembrane topology was insensitive to many amino acid substitutions within the STE sequence but varied directly with the number of negative charges. Furthermore, when present at the amino terminus of a reporter, mutants were observed that adopted type I (amino terminus lumenal) and type II (amino terminus cytoplasmic) transmembrane topologies, demonstrating that the STE sequence can be located at either side of the endoplasmic reticulum membrane. Our results suggest that recognition of a broad structural feature formed primarily by negatively charged residues within the STE halts translocation and triggers membrane integration, even when the negative charges end up on the cytoplasmic side of the membrane. Since functional STE sequences photocross-link to two membrane proteins not previously identified at the translocon, these unique proteins are presumably involved in recognizing STE sequences and/or facilitating STE function.     

Anionic phospholipids are determinants of membrane protein topology.

The orientation of many membrane proteins is determined by the asymmetric distribution of positively charged amino acid residues in cytoplasmic and translocated loops. The positive-inside rule states that loops with large amounts of these residues tend to have cytoplasmic locations. Orientations of constructs derived from the inner membrane protein leader peptidase from Escherichia coli were found to depend on the anionic phospholipid content of the membrane. Lowering the contents of anionic phospholipids facilitated membrane passage of positively charged loops. On the other hand, elevated contents of acidic phospholipids in the membrane rendered translocation more sensitive to positively charged residues. The results demonstrate that anionic lipids are determinants of membrane protein topology and suggest that interactions between negatively charged phospholipids and positively charged amino acid residues contribute to the orientation of membrane proteins.     

Efficient translocation of positively charged residues of M13 procoat protein across the membrane excludes electrophoresis as the primary force for membrane insertion.

The coat protein of bacteriophage M13 is inserted into the Escherichia coli plasma membrane as a precursor protein, termed procoat, with a typical leader peptide of 23 amino acid residues. Its membrane insertion requires the electrochemical potential but not the cellular components SecA and SecY. Since the electrochemical gradients result in the periplasmic side of the membrane being positively charged, the membrane potential could contribute to the transfer of the negatively charged central region of procoat across the membrane. Here we demonstrate that the central domain following the leader peptide can be translocated across the membrane even when the net charge of the region is changed from -3 to +3. This rules out an electrophoresis-like insertion mechanism for procoat. We also show that the sec independence of procoat insertion is linked to the presence of the second apolar domain. The deletion of most of the second apolar domain from a procoat fusion protein results in sec dependent membrane insertion of the hybrid protein. Moreover, like other proteins that require the sec genes, translocation of this sec dependent procoat protein is inhibited when positively charged residues are introduced after the leader peptide. Loop models involving one or two hydrophobic regions are presented that account for the differences in tolerance of positively charged residues.     

A tripartite structure of the signals that determine protein insertion into the endoplasmic reticulum membrane

Multilineage colony stimulating factor is a secretory protein with a cleavable signal sequence that is unusually long and hydrophobic. Using molecular cloning techniques we exchanged sequences NH2- or COOH-terminally flanking the hydrophobic signal sequence. Such modified fusion proteins still inserted into the membrane but their signal sequence was not cleaved. Instead the proteins were now anchored in the membrane by the formerly cleaved signal sequence (signal-anchor sequence). They exposed the NH2 terminus on the exoplasmic and the COOH terminus on the cytoplasmic side of the membrane. We conclude from our results that hydrophilic sequences flanking the hydrophobic core of a signal sequence can determine cleavage by signal peptidase and insertion into the membrane. It appears that negatively charged amino acid residues close to the NH2 terminal side of the hydrophobic segment are compatible with translocation of this segment across the membrane. A tripartite structure is proposed for signal-anchor sequences: a hydrophobic core region that mediates targeting to and insertion into the ER membrane and flanking hydrophilic segments that determine the orientation of the protein in the membrane.     

Membrane protein topology: effects of delta mu H+ on the translocation of charged residues explain the ''positive inside'' rule.

The membrane electrochemical potential is critical for the export of most periplasmic proteins in Escherichia coli. Its exact role during insertion of integral inner membrane proteins, however, remains obscure. Using derivatives of the inner membrane protein leader peptidase (Lep), we now show that the membrane potential appears to stimulate the membrane translocation of chain segments containing negatively charged residues, that positively charged regions appear to be more easily translocated in the absence of a potential, and that certain Lep constructs insert with different topologies in the presence and absence of a membrane potential, suggesting that the electrochemical potential introduces an asymmetry between the topological effects of positively and negatively charged amino acids during the process of membrane protein insertion in E. coli.     

The role of the N region in signal sequence and signal-anchor function.

To determine the role of sequences other than the hydrophobic core in mediating signal sequence function, we examined the behavior of fusion proteins and deletion mutants in cell-free systems. We demonstrate that neither the N nor the C region of the preprolactin signal sequence is necessary for translocation. However, insertion of sequences with either a net charge of +2.5 or -6.0 between the N region and the hydrophobic core of the signal converted it into a signal-anchor. The topologies adopted (types I and II, respectively) were opposite those predicted from the distribution of charges surrounding the hydrophobic core of the signals. When these mutant signals were located in the interior of an otherwise secreted protein, both sequences functioned as stop-transfer sequences. Related mutations were assayed in fusion proteins in which the IgM transmembrane domain functioned as an amino-terminal signal-anchor. For these molecules, the distribution of charged residues surrounding the hydrophobic core had no influence on the topology adopted. Our results suggest that features other than simple charge distribution play an important role in determining membrane topology in vitro.     

Sec-dependent membrane protein biogenesis: SecYEG, preprotein hydrophobicity and translocation kinetics control the stop-transfer function.

Preprotein translocase catalyzes membrane protein integration as well as complete translocation. Membrane proteins must interrupt their translocation and be laterally released from the translocase into the lipid bilayer. We have analyzed the translocation arrest and lateral release activities of Escherichia coli preprotein translocase with an in vitro reaction and the preprotein proOmpA carrying a synthetic stop-transfer sequence. Membrane protein integration is catalytic, occurs with kinetics similar to those of proOmpA itself and only requires the functions of SecYEG and SecA. Though a strongly hydrophobic segment will direct the protein to leave the translocase and enter the lipid bilayer, a protein with a segment of intermediate hydrophobicity partitions equally between the translocated and membrane-integrated states. Analysis of the effects of PMF, varied ATP concentrations or synthetic translocation arrest show that the stop-translocation efficiency of a mildly hydrophobic segment depends on the translocation kinetics. In contrast, the lateral partitioning from translocase to lipids depends solely on temperature and does not require SecA ATP hydrolysis or SecA membrane cycling. Thus translocation arrest is controlled by the SecYEG translocase activity while lateral release and membrane integration are directed by the hydrophobicity of the segment itself. Our results suggest that a greater hydrophobicity is required for efficient translocation arrest than for lateral release into the membrane.     

Signal and membrane anchor functions overlap in the type II membrane protein I gamma CAT

I gamma CAT is a hybrid protein that inserts into the membrane of the endoplasmic reticulum as a type II membrane protein. These proteins span the membrane once and expose the NH2-terminal end on the cytoplasmic side and the COOH terminus on the exoplasmic side. I gamma CAT has a single hydrophobic segment of 30 amino acid residues that functions as a signal for membrane insertion and anchoring. The signal-anchor region in I gamma CAT was analyzed by deletion mutagenesis from its COOH-terminal end (delta C mutants). The results show that the 13 amino acid residues on the amino-terminal side of the hydrophobic segment are not sufficient for membrane insertion and translocation. Mutant proteins with at least 16 of the hydrophobic residues are inserted into the membrane, glycosylated, and partially proteolytically processed by a microsomal protease (signal peptidase). The degree of processing varies between different delta C mutants. Mutant proteins retaining 20 or more of the hydrophobic amino acid residues can span the membrane like the parent I gamma CAT protein and are not proteolytically processed. Our data suggest that in the type II membrane protein I gamma CAT, the signals for membrane insertion and anchoring are overlapping and that hydrophilic amino acid residues at the COOH-terminal end of the hydrophobic segment can influence cleavage by signal peptidase. From this and previous work, we conclude that the function of the signal-anchor sequence in I gamma CAT is determined by three segments: a positively charged NH2 terminus, a hydrophobic core of at least 16 amino acid residues, and the COOH-terminal flanking hydrophilic segment.     

In vitro kinetic analysis of the role of the positive charge at the amino-terminal region of signal peptides in translocation of secretory protein across the cytoplasmic membrane in Escherichia coli

By using an in vitro system for the translocation of secretory proteins in Escherichia coli, detailed and quantitative studies were performed as to the function of the positively charged amino acid residues at the amino terminus of the signal peptide. Uncleavable OmpF-Lpp, a model secretory protein carrying an uncleavable signal peptide, and mutant proteins derived from it were used as translocation substrates. When the positive charge, +2 (LysArg) for the wild-type, was changed to 0, -1, or -2, little or no translocation was observed. The number of the positive charge was altered by introducing different numbers of Lys or Arg residues into the amino terminus. The rate of translocation was roughly proportional to this number, irrespective of whether the charged amino acid residues were Lys or Arg. When the amino-terminal LysArg was replaced by His residues, translocation took place more efficiently at pH 6.5 than pH 8.0, whereas that of the wild-type was about the same as the two pH values. We conclude that the signal peptide requires a positive charge at its amino-terminal region to function in the translocation reaction and that the rate of translocation is roughly proportional to the number of the positively charged group, irrespective of the amino acid species that donates the charge. Evidence suggesting that the positive charge is involved in the binding of precursor proteins to the membrane surface to initiate translocation is also presented.     

Amino acid sequence of an egg-lysin protein from abalone spermatozoa that solubilizes the vitelline layer

Spermatozoa of the California red abalone (Haliotis rufescens; Phylum Mollusca, order Archeogastropoda) possess an acrosomal protein that dissolves the egg vitelline layer during fertilization. Evidence strongly suggests that the dissolution mechanism is a stoichiometric, nonenzymatic process that depends on the hydrophobic nature of the sperm protein which should therefore be termed an egg-lysin. Here we report the complete amino acid sequence of this unique protein. Peptides obtained by cyanogen bromide cleavage and trypsin and V8 protease digestions were isolated and subjected to automated Edman degradation. Seven unique CNBr fragments accounted for the intact lysin and the proteolytically derived peptides were used to establish the order of these fragments. The protein is composed of 134 amino acids and contains 36 charged amino acids. The majority of these occur at distances of 2 or 3 residues from each other. A stretch of 41 amino acids contains 10 positively charged amino acids and no negatively charged residue. Model building experiments demonstrated that the charged residues that may occur in alpha-helical regions of the protein would occupy one-half of the circumference of such helices. The other half would display predominantly hydrophobic residues. This arrangement of the charged and hydrophobic residues may account for the biological properties of the lysin.     

The translocation of negatively charged residues across the membrane is driven by the electrochemical potential: evidence for an electrophoresis-like membrane transfer mechanism.

The role of the membrane electrochemical potential in the translocation of acidic and basic residues across the membrane was investigated with the M13 procoat protein, which has a short periplasmic loop, and leader peptidase, which has an extended periplasmically located N-terminal tail. For both proteins we find that the membrane potential promotes membrane transfer only when negatively charged residues are present within the translocated domain. When these residues are substituted by uncharged amino acids, the proteins insert into the membrane independently of the potential. In contrast, when a positively charged residue is present within the N-terminal tail of leader peptidase, the potential impedes translocation of the tail domain. However, an impediment was not observed in the case of the procoat protein, where positively charged residues in the central loop are translocated even in the presence of the membrane potential. Intriguingly, several of the negatively charged procoat proteins required the SecA and SecY proteins for optimal translocation. The studies reported here provide insights into the role of the potential in membrane protein assembly and suggest that electrophoresis can play an important role in controlling membrane topology.     

Fine-tuning the topology of a polytopic membrane protein: role of positively and negatively charged amino acids

The effects of positively and negatively charged residues on the membrane topology of a model E. coli protein with two transmembrane segments have been studied. We show that addition or removal of as little as a single positively charged lysine residue in one of two critical regions can be sufficient to reverse the transmembrane topology of the molecule from Nout-Cout to Nin-Cin. Negatively charged residues are much less potent and significantly affect the topology only if present in high numbers. Finally, we provide data to suggest that sec-independent and sec-dependent translocation mechanisms differ in their sensitivity to positively charged amino acids.     

Outer-membrane PhoE protein of Escherichia coli K-12 as an exposure vector: possibilities and limitations.

The phosphate-limitation-inducible outer-membrane protein (PhoE) of Escherichia coli K-12 can be used in an expression system as a carrier for foreign antigenic determinants, facilitating their transport to the bacterial cell surface. The system is very flexible, since insertions varying in length and nature can be made in different cell-surface-exposed regions of PhoE protein, without interfering with the assembly process into the outer membrane. Multiple insertions of an antigenic determinant can be made in the second and eighth exposed regions, resulting in a total insert length of up to 30 and 50 amino acid (aa) residues. Insertions can be made in two exposed regions, simultaneously. However, some limitations were encountered, e.g., insertion of eight or more hydrophobic aa residues affected both the translocation process across the inner membrane and the assembly process into the outer membrane. Also, the insertion of sequences containing many charged residues resulted in accumulation of precursor protein in the cytoplasm.     

Positive charges in the cytoplasmic domain of Escherichia coli leader peptidase prevent an apolar domain from functioning as a signal.

Leader peptidase, an integral transmembrane protein of Escherichia coli, requires two apolar topogenic elements for its membrane assembly: a 'hydrophobic helper' and an internal signal. The highly basic cytoplasmic region between these domains is a translocation poison sequence, which we have shown blocks the function of a preceding signal sequence. We have used oligonucleotide-directed mutagenesis to remove positively charged residues within this polar domain to determine if it is the basic character in this region that has the negative effect on translocation. Our results show that mutations that remove two or more of the positively charged residues within the polar region no longer block membrane assembly of leader peptidase. In addition, when the translocation poison domain (residues 30-52) is replaced with six lysine residues, the preceding apolar domain cannot function as an export signal, whereas it can with six glutamic acids. Thus, positively charged residues within membrane proteins may have a major role in determining the function of hydrophobic domains in membrane assembly.     

Membrane protein insertion of variant MscL proteins occurs at YidC and SecYEG of Escherichia coli

The mechanosensitive channel MscL in the inner membrane of Escherichia coli is a homopentameric complex involved in homeostasis when cells are exposed to hypoosmotic conditions. The E. coli MscL protein is synthesized as a polypeptide of 136 amino acid residues and uses the bacterial signal recognition particle for membrane targeting. The protein is inserted into the membrane independently of the Sec translocon but requires YidC. Depletion of YidC inhibits translocation of the protein across the membrane. Insertion of MscL occurs primarily in a proton motive force-independent manner. The hydrophilic loop region of MscL has 29 residues that include 5 charged residues. Altering the charges in the periplasmic loop of MscL affects the requirements for membrane insertion. The introduction of one, two or three negatively charged amino acids makes the insertion dependent on the electrochemical membrane potential and gradually dependent on the Sec translocon, whereas the addition of five negatively charged residues as well as the addition of three positively charged residues inhibits membrane insertion of MscL. However, we find that the mutant with three uncharged residues requires both the SecYEG complex and YidC but not SecA for membrane insertion. In vivo cross-linking data showed that the newly synthesized MscL interacts with YidC and with SecY. Therefore, the MscL mutants use a membrane insertion mechanism that involves SecYEG and YidC simultaneously.     

Membrane topogenesis of a type I signal-anchor protein, mouse synaptotagmin II, on the endoplasmic reticulum

Synaptotagmin II is a type I signal-anchor protein, in which the NH(2)-terminal domain of 60 residues (N-domain) is located within the lumenal space of the membrane and the following hydrophobic region (H-region) shows transmembrane topology. We explored the early steps of cotranslational integration of this molecule on the endoplasmic reticulum membrane and demonstrated the following: (a) The translocation of the N-domain occurs immediately after the H-region and the successive positively charged residues emerge from the ribosome. (b) Positively charged residues that follow the H-region are essential for maintaining the correct topology. (c) It is possible to dissect the lengths of the nascent polypeptide chains which are required for ER targeting of the ribosome and for translocation of the N-domain, thereby demonstrating that different nascent polypeptide chain lengths are required for membrane targeting and N-domain translocation. (d) The H-region is sufficiently long for membrane integration. (e) Proline residues preceding H-region are critical for N-domain translocation, but not for ER targeting. The proline can be replaced with amino acid with low helical propensity.     

Stop-transfer activity of hydrophobic sequences depends on the translation system

Signal and stop-transfer sequences are the known determinants involved in topogenesis of integral membrane proteins. To study the characteristics of stop-transfer sequences, artificial proteins have been created on the DNA level based on the cDNA of the asialoglycoprotein receptor H1. Its internal signal/anchor domain initiates translocation of the downstream sequence across the endoplasmic reticulum membrane. The ability of several hydrophobic sequences inserted into the translocating polypeptide to stop further transfer was analyzed by translation of the fusion proteins using the wheat germ extract and rabbit reticulocyte lysate systems with dog pancreas microsomes. We discovered that some of the sequences behave differently with respect to translocation across the membrane depending on the translation system. Expression of one of the fusion proteins in fibroblasts showed that the reticulocyte lysate system reflects more closely the in vivo situation than the wheat germ system. Our results suggest that in a homologous system the translating ribosomes interact with the translocation machinery and influence the termination of polypeptide transfer by hydrophobic sequences.