Fractionation and characterization of chlorophyll and lignin from de-juiced Italian ryegrass (Lolium multifolrum) and timothy grass (Phleum pratense)

In this study, de-juiced Italian ryegrass and timothy grass were successfully fractionated into one chlorophyll rich fraction, two lignin fractions, two hemicellulosic preparations, and one cellulosic fraction by sequential processes with 80% ethanol containing 0.2% NaOH, 2.5% H₂O₂–0.2% EDTA containing 1.5% NaOH, and 2.5% H₂O₂–0.2% TAED containing 1.0% NaOH at 75 °C for 3 h, respectively. The yields of chlorophyll rich fraction and total lignin fraction were found to be 6.1 and 11.0% from de-juiced Italian ryegrass, and 12.7 and 13.2% from de-juiced timothy grass. It should be noted that the two chlorophyll rich fractions contained noticeable amounts of contaminated hemicelluloses (17.1–18.8%) and lignin, whereas the four lignin fractions contained only small amounts of bound hemicelluloses (5.6–8.6%). Nitrobenzene oxidation and NMR spectra of the lignin fraction revealed that the presence of both guaiacyl and syringyl units, as well as p-hydroxyphenyl structures. Small amounts of esterified p-coumaric acids and mainly etherified ferulic acids were also identified in the lignin fractions. It was found that the lignin fractions obtained from the two different grasses had very similar structural composition. They are distinguished by rather low amounts of β-O-4 structures, resinol units (β-β), and of condensed units (β-5 and 5-5). This trait is even more pronounced in the production of phenolic compounds for chemical industry from grass.     

Fibrillation tendency of cellulosic fibers—Part 4. Effects of alkali pretreatment of various cellulosic fibers

The effects of alkali type and the concentration in the alkali treatments on the weight loss in six cellulosic fibers and their influences on the fibrillation tendency were investigated. The fibril number of the cellulosic fibers pretreated with alkalis (FN_pre) increased with increasing the alkali concentrations as well as the weight loss of the fiber except in the lyocell fiber treated in NaOH and KOH solutions. The FN_pre in lyocell was reduced as the fibers were treated in 5 mol/l NaOH and KOH solutions. This result and the fact that the fibers were split in organic alkali such as tetramethylammonium hydroxide even at the low weight loss suggested that not only the loss of cellulose component but also reorganization of microfibril structure, inhomogeneous swelling of the fibers and other influences control the fibrillation tendency of cellulosic fibers.     

Hemicelluloses negatively affect lignocellulose crystallinity for high biomass digestibility under NaOH and H2SO4 pretreatments in Miscanthus

ABSTRACT: BACKGROUND: Lignocellulose is the most abundant biomass on earth. However, biomass recalcitrance has become a major factor affecting biofuel production. Although cellulose crystallinity significantly influences biomass saccharification, little is known about the impact of three major wall polymers on cellulose crystallization. In this study, we selected six typical pairs of Miscanthus samples that presented different cell wall compositions, and then compared their cellulose crystallinity and biomass digestibility after various chemical pretreatments. RESULTS: A Miscanthus sample with a high hemicelluloses level was determined to have a relatively low cellulose crystallinity index (CrI) and enhanced biomass digestibility at similar rates after pretreatments of NaOH and H2SO4 with three concentrations. By contrast, a Miscanthus sample with a high cellulose or lignin level showed increased CrI and low biomass saccharification, particularly after H2SO4 pretreatment. Correlation analysis revealed that the cellulose CrI negatively affected biomass digestion. Increased hemicelluloses level by 25% or decreased cellulose and lignin contents by 31% and 37% were also found to result in increased hexose yields by 1.3-times to 2.2-times released from enzymatic hydrolysis after NaOH or H2SO4 pretreatments. The findings indicated that hemicelluloses were the dominant and positive factor, whereas cellulose and lignin had synergistic and negative effects on biomass digestibility. CONCLUSIONS: Using six pairs of Miscanthus samples with different cell wall compositions, hemicelluloses were revealed to be the dominant factor that positively determined biomass digestibility after pretreatments with NaOH or H2SO4 by negatively affecting cellulose crystallinity. The results suggested potential approaches to the genetic modifications of bioenergy crops.     

Cellulase digestibility of pretreated biomass is limited by cellulose accessibility

Attempts to correlate the physical and chemical properties of biomass to its susceptibility to enzyme digestion are often inconclusive or contradictory depending on variables such as the type of substrate, the pretreatment conditions and measurement techniques. In this study, we present a direct method for measuring the key factors governing cellulose digestibility in a biomass sample by directly probing cellulase binding and activity using a purified cellobiohydrolase (Cel7A) from Trichoderma reesei. Fluorescence-labeled T. reesei Cel7A was used to assay pretreated corn stover samples and pure cellulosic substrates to identify barriers to accessibility by this important component of cellulase preparations. The results showed cellulose conversion improved when T. reesei Cel7A bound in higher concentrations, indicating that the enzyme had greater access to the substrate. Factors such as the pretreatment severity, drying after pretreatment, and cellulose crystallinity were found to directly impact enzyme accessibility. This study provides direct evidence to support the notion that the best pretreatment schemes for rendering biomass more digestible to cellobiohydrolase enzymes are those that improve access to the cellulose in biomass cell walls, as well as those able to reduce the crystallinity of cell wall cellulose.     

Solubilization of native and derived forms of cellulose by cell-free microbial enzymes

1. Cell-free enzymes from Myrothecium verrucaria and Trichoderma koningii hydrolyse native undegraded cellulose, as found in cotton fibres, in a random manner to short insoluble fibres and to minor amounts of soluble products. 2. Enzyme preparations from M. verrucaria fail to attack the short fibres whereas preparations from T. koningii solubilize them completely to sugars at an optimum pH4.2-4.6. 3. The mode of hydrolysis of cotton cellulose by preparations from T. koningii involves from the earliest stages the formation of reducing sugars, followed closely by the appearance of short fibres, until the insoluble and soluble products each constitute about 40-50% of the weight of the initial substrate. After this stage the quantity of sugars increases at the expense of the insoluble short fibres. 4. Depending upon the method of preparation, derived forms of cellulose may be hydrolysed more slowly, much more rapidly, or at the same rate as cotton fibres by enzyme preparations from T. koningii.     

Binding of Extracellular Carboxymethylcellulase Activity from the Marine Shipworm Bacterium to Insoluble Cellulosic Substrates

The binding of extracellular endoglucanase, a carboxymethylcellulase (CMCase), produced by the marine shipworm bacterium to insoluble cellulose substrates was investigated. Up to 70% of CMCase activity bound to cellulosic substrates, and less than 10% bound to noncellulosic substrates. CMCase binding to cellulose was enhanced in basal salt medium or sodium phosphate buffer containing 0.5 M NaCl. Increased cellulose particle size correlated with decreased CMCase binding. Also, cellulose treated with either 5 N NaOH or commercial cellulase reduced the CMCase binding to these surfaces. Pretreatment of CMCase preparations with 0.01% sodium dodecyl sulfate, 5% β-mercaptoethanol, and 5 mM EDTA or ethylene glycol-bis(β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid (EGTA) had little effect on binding to cellulose. While pretreatment of CMCase with trypsin, chymotrypsin, and pronase had little effect on CMCase enzymatic activity, the ability to bind to cellulose was greatly diminished by these treatments.     

Fractionation and characterization of polysaccharides from abaca fibre

Abaca fibre polysaccharides were fractionated into water soluble, pectic, 1% NaOH soluble, hemicellulosic and cellulose fractions by extraction with hot water, dilute hydrochloric acid (pH 1.6), aqueous 1% NaOH and 17.5% NaOH, respectively. Cellulose (60.4–63.6%) and hemicelluloses (20.8%) were the major polysaccharides in abaca fibres. The hot water soluble polysaccharides contained noticeable amounts of pectic substances and a large proportion of neutral polysaccharides. The pectic polysaccharide preparation was enriched in both galacturonic acid and neutral sugars, including xylose, glucose, galactose, arabinose, and rhamnose. Extraction of the fibre with aqueous 1% NaOH produced the hemicellulose–lignin complex, which was enriched in xylose and, to a lesser extent, glucose-, arabinose- and galactose-containing polysaccharides, together with 7.6% associated lignin. Further extraction of the delignified fibre residue with aqueous 17.5%. NaOH removed the hemicellulose fractions, which were strongly enriched in xylose-containing polysaccharides. Besides ferulic and p-coumaric acids, six other phenolic monomers were also detected in the mixtures of alkaline nitrobenzene oxidation of associated lignin in all the polysaccharide fractions. The content of bound lignin in water soluble, pectic, and 1% NaOH soluble polysaccharides (Fractions 1, 2, and 3), isolated directly from the lignified fibres, was 12 times that of the hemicellulosic preparations (Fractions 4 and 5) isolated from the delignified fibre residues.     

Digestion and excretion of nitrogen and carbohydrate by the cranefly larva Tipula paludosa (Diptera: Tipulidae)

The nitrogenous and carbohydrate components of ryegrass and faeces from larvae of Tipula paludosa Meigen, fed on ryegrass (Lolium perenne L.), were compared. Proteins in ryegrass were efficiently digested and uric acid was the major nitrogenous excretory product. The alkaline midgut (pH 9.1) was considered to enhance the digestibility of hemicellulose, by removing inhibitory acetyl groups, and of cellulose by altering its crystallinity. T. paludosa larvae assimilated 50% of ryegrass cellulose, and 50% of an isolated ¹⁴C-labelled cellulose, whereas 86% of hemicellulose was digested.     

Analysis of retted and non retted flax fibres by chemical and enzymatic means

Flax fibres (Linum usitatissimum L.) were subjected to chemical and enzymatic analysis in order to determine the compositional changes brought about by the retting process and also to determine the accessibility of the fibre polymers to enzymatic treatment. Chemical analysis involved subjecting both retted and non retted fibres to a series of sequential chemical extractions with 1% ammonium oxalate, 0.05 M KOH, 1 M KOH and 4 M KOH. Retting was shown to cause minimal weight loss from the fibres but caused significant changes to the pectic polymers present. Retted fibres were shown to have significantly lower amounts of rhamnogalacturonan as well as arabinan and xylan. In addition the average molecular mass of the pectic extracts was considerably lowered. Enzyme treatment of the 1 M KOH extracts with two different enzymes demonstrated that the non retted extract contained a relatively high molecular weight xylan not found in the retted extract. Treatment of the 1 M KOH extracts and the fibres with Endoglucanase V from Trichoderma viride demonstrated that while this enzyme solubilised cellulose as well as xylan and xyloglucan oligomers from the extract, it had limited access to these polymers on the fibre. MALDI-TOF MS analysis of the material solubilised from the extract suggested that the xylan was randomly substituted with 4-O-methyl glucuronic acid moieties. The xyloglucan was shown to be of the XXXG type and was substituted with galactose and fucose units. The enzyme treatments of the fibres demonstrated that the xylan and xyloglucan polymers in the fibres were not accessible to the enzyme but that material which was entrapped by the cellulose could be released by the hydrolysis of this cellulose.     

Crystallinity of lyophilised carrot cell wall components

The aim of this work was to investigate the effect of removal of cell wall components on the crystallinity of cell walls using X-ray diffraction. Various insoluble cell wall residues were prepared following a sequential extraction of carrot cell wall material. X-ray diffraction patterns were typical of cellulose although there was a possible contribution of pectic polysaccharides to the crystallinity. As more amorphous material was removed to produce a cellulose rich residue, the crystallinity index increased from 12 to 16%, larger than that estimated from cellulose alone. For the last residue treated with 4M KOH, a lower value of crystallinity was found (14%) which resulted from the change of some crystalline domains of cellulose into amorphous regions. Pressing conditions (temperature, water content) have been investigated and did not alter the crystallinity index significantly.     

Screening of cellulases for biofuel production: online monitoring of the enzymatic hydrolysis of insoluble cellulose using high-throughput scattered light detection

A new prospective cellulase assay simultaneously combining high-throughput, online analysis and insoluble cellulosic substrates is described. The hydrolysis of three different insoluble cellulosic substrates, catalysed by a commercial cellulase preparation from Trichoderma reesei (Celluclast), was monitored using the BioLector - allowing online monitoring of scattered light intensities in a continuously shaken microtiter plate. Cellulase activities could be quantitatively assayed using the BioLector. At low cellulase/cellulose ratios, the Michaelis-Menten parameters of the cellulase mixture were mainly affected by the crystallinity index of the cellulose. Here, the apparent maximum cellulase activities inversely correlated with the crystallinity index of the cellulose. At high cellulase/cellulose ratios the particle size of the cellulose, defining the external surface area accessible to the cellulases, was the key determining factor for cellulase activity. The developed technique was also successfully applied to evaluate the pH optimum of cellulases. Moreover, the non-hydrolytic deagglomeration of cellulose particles was investigated, for the first time, using high-throughput scattered light detection. In conclusion, this cellulase assay ideally links high-throughput, online analysis and realistic insoluble cellulosic substrates in one simple system. It will considerably simplify and accelerate fundamental research on cellulase screening.     

Sulfuric acid pretreatment and enzymatic hydrolysis of photoperiod sensitive sorghum for ethanol production

Photoperiod sensitive (PS) sorghum, with high soluble sugar content, high mass yield and high drought tolerance in dryland environments, has great potential for bioethanol production. The effect of diluted sulfuric acid pretreatment on enzymatic hydrolysis was investigated. Hydrolysis efficiency increased from 78.9 to 94.4% as the acid concentration increased from 0.5 to 1.5%. However, the highest total glucose yield (80.3%) occurred at the 1.0% acid condition because of the significant cellulose degradation at the 1.5% concentration. Synchrotron wide-angle X-ray diffraction was used to study changes of the degree of crystallinity. With comparison of cellulosic crystallinity and adjusted cellulosic crystallinity, the crystalline cellulose decreased after low acidic concentration (0.5%) applied, but did not change significantly, as the acid concentration increased. Scanning electron microscopy was also employed to understand how the morphological structure of PS sorghum changed after pretreatment. Under current processing conditions, the total ethanol yield is 74.5% (about 0.2 g ethanol from 1 g PS sorghum). A detail mass balance was also provided.     

Modification of cellulosic fibers by UV-irradiation. Part II: After treatments effects

This work presents the comparative study on the dyeing behavior of cellulose fibers in alkaline solutions and under the influence of UV radiation. The cellulosic fabrics were pretreated followed by conventional mercerization technique or treatment with UV irradiation. For different time duration the reorganization of cellulose fibers by swelling treatments in alkaline solutions results in numerous structural modifications, causing changes of their accessibility and/or reactivity. The results revealed that the swelling of the cellulosic fibers depends on type of pre-treatment, dose of the radiation and the concentration of alkaline solution used. SEM analysis confirmed that UV irradiation of the cellulosic fibers leads to a higher swelling in comparison with any concentration of NaOH treatment. In comparison of both the treatments, the mercerized cellulosic fibers have shown better tear and tensile strength as compared to the untreated and UV irradiated one. There is adverse effect of UV radiation on the mechanical properties of UV radiation. Moreover, no loss in weight was observed after exposing the cellulose fabrics surface to UV radiation.     

Comparative characterization of a recombinant Volvariella volvacea endoglucanase I (EG1) with its truncated catalytic core (EG1-CM), and their impact on the bio-treatment of cellulose-based fabrics

Recombinant Volvariella volvacea endoglucanase 1 (EG1) and its catalytic module (EG1-CM) were obtained by expression in Pichia pastoris, purified by two-step chromatography, and the catalytic activities and binding capacities were compared. EG1 and EG1-CM exhibited very similar specific activities towards the soluble substrates carboxymethyl cellulose, lichenan and mannan, and insoluble H₃PO₄ acid-swollen cellulose, whereas the specific activities of EG1-CM towards the insoluble substrates -cellulose, Avicel and filter paper were approximately 58, 43 and 38%, respectively compared to EG1. No increase in reducing sugar release was detected in the reaction mixture supernatants after 50 h exposure of filter paper, Avicel or -cellulose to EG1-CM, whereas increases in the total reducing sugar equivalents (i.e. reducing sugar released into solution together with new reducing ends generated in the cellulosic substrates) in reaction mixtures were observed after 1 h. In reaction mixtures containing EG1, soluble reducing sugar equivalents were detected in supernatants after 3 h incubation with the insoluble cellulosic substrates. EG1-CM did not adsorb to Avicel, and the binding capacities of EG1-CM towards filter paper and H₃PO₄ acid-swollen cellulose were 27.9–33.3% and 29.6–60.6%, respectively of values obtained with EG1 within the range of total added protein. In enzymatic deinking experiments, the ink removal rate in EG1-CM-treated samples was only slightly higher (8%), than that of untreated controls, whereas that of the EG1-treated samples was 100% higher. Bio-stoning of denim with EG1-CM resulted in increases of 48% and 40% in weight loss and indigo dye removal, respectively compared with untreated controls. These increases were considerably lower than the corresponding values of 219% and 133% obtained when samples were treated with EG1.     

Effects of alkaline hydrogen peroxide treatment on in vitro degradation of cellulosic substrates by mixed ruminal microorganisms and Bacteroides succinogenes S85

The effects of sodium hydroxide (NaOH) and alkaline hydrogen peroxide (AHP) treatments on wheat straw (WS) and various cellulosic substrates were determined by measuring susceptibility to degradation by mixed ruminal organisms or Bacteroides succinogenes S85. In vitro incubations were used to measure differences in fermentation resulting from each successive step in the AHP treatment process. In vitro incubations through 48 or 108 h were conducted to measure these differences. The AHP treatment of WS increased (P less than 0.05) dry matter, neutral detergent fiber, and acid detergent fiber degradation over control WS when these substrates were incubated with mixed ruminal microorganisms or B. succinogenes S85. Fermentations containing AHP-treated WS had greater (P less than 0.05) microbial purine (RNA) and volatile fatty acid concentrations by 12 h compared with those containing untreated or NaOH-treated WS. Xylose in AHP-treated WS was utilized more extensively (P less than 0.05) by 12 h compared with the xylose of untreated or NaOH-treated WS. Treatment with AHP removed 23% of the alkali-labile phenolic compounds from WS. When substrates with high levels of crystalline cellulose (raw cotton fiber, Solka floc, and Sigmacell-50) were treated with NaOH or AHP and incubated for 108 h with B. succinogenes S85, extent of acid detergent fiber degradation of cotton fiber and Sigmacell-50 was similar to that of their respective controls. Sodium hydroxide and AHP treatments were effective in increasing acid detergent fiber degradation of the Solka floc which contained, on average, 3.3 and 4.8 percentage units more acid detergent lignin and hemicellulose, respectively, than cotton fiber and Sigmacell-50.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effects of alkaline hydrogen peroxide treatment on in vitro degradation of cellulosic substrates by mixed ruminal microorganisms and Bacteroides succinogenes S85.

The effects of sodium hydroxide (NaOH) and alkaline hydrogen peroxide (AHP) treatments on wheat straw (WS) and various cellulosic substrates were determined by measuring susceptibility to degradation by mixed ruminal organisms or Bacteroides succinogenes S85. In vitro incubations were used to measure differences in fermentation resulting from each successive step in the AHP treatment process. In vitro incubations through 48 or 108 h were conducted to measure these differences. The AHP treatment of WS increased (P less than 0.05) dry matter, neutral detergent fiber, and acid detergent fiber degradation over control WS when these substrates were incubated with mixed ruminal microorganisms or B. succinogenes S85. Fermentations containing AHP-treated WS had greater (P less than 0.05) microbial purine (RNA) and volatile fatty acid concentrations by 12 h compared with those containing untreated or NaOH-treated WS. Xylose in AHP-treated WS was utilized more extensively (P less than 0.05) by 12 h compared with the xylose of untreated or NaOH-treated WS. Treatment with AHP removed 23% of the alkali-labile phenolic compounds from WS. When substrates with high levels of crystalline cellulose (raw cotton fiber, Solka floc, and Sigmacell-50) were treated with NaOH or AHP and incubated for 108 h with B. succinogenes S85, extent of acid detergent fiber degradation of cotton fiber and Sigmacell-50 was similar to that of their respective controls. Sodium hydroxide and AHP treatments were effective in increasing acid detergent fiber degradation of the Solka floc which contained, on average, 3.3 and 4.8 percentage units more acid detergent lignin and hemicellulose, respectively, than cotton fiber and Sigmacell-50.(ABSTRACT TRUNCATED AT 250 WORDS)     

Enhancement of enzymatic saccharification of cellulose by cellulose dissolution pretreatments

Attempts were made to enhance cellulose saccharification by cellulase using cellulose dissolution as a pretreatment step. Four cellulose dissolution agents, NaOH/Urea solution, N-methylmorpholine-N-oxide (NMMO), ionic liquid (1-butyl-3-methylimidazolium chloride; [BMIM]Cl) and 85% phosphoric acid were employed to dissolve cotton cellulose. In comparison with conventional cellulose pretreatment processes, the dissolution pretreatments were operated under a milder condition with temperature <130 °C and ambient pressure. The dissolved cellulose was easily regenerated in water. The regenerated celluloses exhibited a significant improvement (about 2.7- to 4.6-fold enhancement) on saccharification rate during 1st h reaction. After 72 h, the saccharification yield ranged from 87% to 96% for the regenerated celluloses while only around 23% could be achieved for the untreated cellulose. Even with high crystallinity, cellulose regenerated from phosphoric acid dissolution achieved the highest saccharification rates and yield probably due to its highest specific surface area and lowest degree of polymerization (DP).     

Homogeneous modification of sugarcane bagasse cellulose with succinic anhydride using a ionic liquid as reaction medium

The homogeneous chemical modification of sugarcane bagasse cellulose with succinic anhydride using 1-allyl-3-methylimidazolium chloride (AmimCl) ionic liquid as a reaction medium was studied. Parameters investigated included the molar ratio of succinic anhydride/anhydroglucose units in cellulose in a range from 2:1 to 14:1, reaction time (from 30 to 160min), and reaction temperature (between 60 and 110 degrees C). The succinylated cellulosic derivatives were prepared with a low degree of substitution (DS) ranging from 0.071 to 0.22. The results showed that the increase of reaction temperature, molar ratio of SA/AGU in cellulose, and reaction time led to an increase in DS of cellulose samples. The products were characterized by FT-IR and solid-state CP/MAS (13)C NMR spectroscopy, and thermal analysis. It was found that the crystallinity of the cellulose was completely disrupted in the ionic liquid system under the conditions given. The data also demonstrated that homogeneous modification of cellulose with succinic anhydride in AmimCl resulted in the production of cellulosic monoester. The thermal stability of the succinylated cellulose decreased upon chemical modification.     

产自Aspergillus sp.DLCS-F18的嗜酸嗜热纤维素酶及其酶学性质

纤维素酶在饲料、造纸、纺织和纤维素乙醇生产等领域有重要用途,因而备受关注.使用稻草为唯一碳源进行纤维素降解微生物的富集,从云南大理苍山地区的土壤样品中筛选获得1株纤维素降解真菌DLCS-F18,其适宜生长温度为15-40℃、pH 2.0-13.0.通过形态学和ITS rRNA分子生物学鉴定,菌株DLCS-F18被鉴定为...     

The development of advanced cellulosic fibres

For the majority of the last century, commercial routes to regenerated cellulose fibres have coped with the difficulties of making a good cellulose solution by using an easy to dissolve derivative (e.g. xanthate in the case of viscose rayon) or complex (e.g. cuprammonium rayon). For the purposes of this paper, advanced cellulosic fibres are defined as those made from a process involving direct dissolution of cellulose. The first examples of such fibres have now been generically designated as lyocell fibres to distinguish them from rayons, and the first commercial lyocell fibre is Courtaulds' Tencel.