Comparability testing of a humanized monoclonal antibody (Synagis) to support cell line stability, process validation, and scale-up for manufacturing.

Biochemical and functional testing of a humanized monoclonal antibody directed against Respiratory Syncytial Virus (Synagis) has been performed to evaluate cell line stability, support process validation, and to demonstrate "comparability" during the course of process development. Using a variety of analytical methods, product manufactured at different sites and in bioreactors from 20 litres to 10,000 litres was shown to be biochemically and functionally equivalent. The biochemical testing for microheterogeneity found on Synagis included evaluation of changes in post-translational modifications such as deamidation, truncation, and carbohydrate structure. Studies were also performed to support cell line stability assessment and cell culture process validation. Cell culture conditions were deliberately varied in an attempt to determine if this would have an impact on the microheterogeneity of the product. In these studies Synagis was produced from cells cultured beyond the population doublings achieved at the maximum manufacturing scale, under conditions of low glucose, and using harvest times outside of the historical manufacturing operating range. Results showed that there was a different pattern of glycosylation during the early stages of bioreactor culture. No other changes in microheterogeneity were apparent for the other culture conditions studied. In summary, comparability assessment demonstrated that the Synagis manufacturing process is robust and consistent resulting in a predictable and reproducible monoclonal antibody product.     

The role of formulation in insulin comparability assessments.

The concept of comparability can be applied when changes are made to manufacturing processes for biotechnology products subsequent to pivotal clinical trial studies. For many process changes, comparability can be demonstrated based entirely on relevant in vitro data provided that a detailed knowledge of the process/product exists, suitable analytical methodology is employed, and historical data are available for the assessment. Insulin provides an excellent model system to illustrate many important considerations when dealing with comparability exercises for biotechnology products. The physicochemical properties of insulin demonstrate the numerous chemical reactions and physical transformations that are exclusive to proteins. These properties are heavily influenced by formulation conditions and must be carefully evaluated when process changes are made. In addition, physical and chemical testing performed on representative formulations can provide valuable insight when assessing the comparability between pre- and post-change materials. This paper reviews our experience with manufacturing changes involving insulin emphasizing the important role of formulation in the comparability exercise for protein biopharmaceuticals.     

Quality Control Testing,Characterization and Critical Quality Attributes of Adeno-Associated Virus Vectors Used for Human Gene Therapy

For adeno-associated virus (AAV)-based human gene therapy, challenges for the translation of promising research results to successful clinical development include optimization of vector design and manufacturing processes to ensure that vectors prepared for administration to human subjects have attributes consistent with safe and durable expression. This article briefly reviews quality control methods for routine testing and supplemental characterization of AAV vectors for investigational product development. The relationship of vector and manufacturing process design with product critical quality attributes is discussed.     

Power of the Dissolution Test in Distinguishing a Change in Dosage Form Critical Quality Attributes

For a dissolution method to be considered relevant to in vivo performance, the dissolution data profiles should show discrimination or meaningful change when there is a change in critical material attributes (CMAs) and critical product properties (CPPs). The dissolution test has been shown repeatedly to have the power to distinguish between significant changes in active pharmaceutical ingredient (API), formulation, and process that relate to the release mechanism of the in vivo performance. Examples will be discussed in the literature where the effects of formulation, drug substance, and manufacturing variables have been measured by dissolution testing. There will be a suggested plan on how to develop and challenge a discriminating method that may be utilized for regulatory purposes. A brief review of other challenges and considerations regarding discriminatory dissolution testing is presented.     

Manufacturing and characterization of extracellular vesicles from umbilical cord–derived mesenchymal stromal cells for clinical testing

Extracellular vesicles (EVs) derived from mesenchymal stromal cells (MSCs) may deliver therapeutic effects that are comparable to their parental cells. MSC-EVs are promising agents for the treatment of a variety of diseases. To reach the intermediate goal of clinically testing safety and efficacy of EVs, strategies should strive for efficient translation of current EV research. On the basis of our in vitro an in vivo findings regarding the biological actions of EVs and our experience in manufacturing biological stem cell therapeutics for routine use and clinical testing, we discuss strategies of manufacturing and quality control of umbilical cord–derived MSC-EVs. We introduce guidelines of good manufacturing practice and their practicability along the path from the laboratory to the patient. We present aspects of manufacturing and final product quality testing and highlight the principle of “The process is the product.” The approach presented in this perspective article may facilitate translational research during the development of complex biological EV-based therapeutics in a very early stage of manufacturing as well as during early clinical safety and proof-of-concept testing.     

Ion chromatographic quantification of cyanate in urea solutions: estimation of the efficiency of cyanate scavengers for use in recombinant protein manufacturing

The chaotrope urea is commonly used during recombinant protein manufacturing as a denaturant/solublizing agent. The adventitious accumulation of cyanate in urea solutions during product manufacturing can cause unwanted carbamylation of proteins, leading to alterations in drug product structure, stability and function. We have developed an ion chromatographic method to quantify cyanate production in urea solutions, suitable for analysis of samples from manufacturing process buffers. We discuss assay development, system suitability criteria and limitations on assay applicability. The assay has a linear range from 2 to 250 microM, with LOQ/LOD values of 6 and 2 microM, respectively. Assay accuracy through spike/recovery testing were established and both precision and intermediate precision were estimated. We assessed the utility of the assay by testing a variety of biological buffers and potential cyanate scavengers, which could be used during protein purification processes, for their ability to control the level of cyanate in 8 M urea solutions buffered over the range of pH 5-10. Our results demonstrate pH dependence for prevention of cyanate accumulation by these buffers/scavengers and indicate useful buffers, pH ranges, and additives for controlling cyanate accumulation during recombinant protein manufacturing. The pertinence of these approaches in preventing protein carbamylation during manufacturing are discussed.     

Developing manufacturing control software: A survey and critique

The complexity and diversity of manufacturing software and the need to adapt this software to the frequent changes in the production requirements necessitate the use of a systematic approach to developing this software. The software life-cycle model (Royce, 1970) that consists of specifying the requirements of a software system, designing, implementing, testing, and evolving this software can be followed when developing large portions of manufacturing software. However, the presence of hardware devices in these systems and the high costs of acquiring and operating hardware devices further complicate the manufacturing software development process and require that the functionality of this software be extended to incorporate simulation and prototyping. This paper reviews recent methods for planning, scheduling, simulating, and monitoring the operation of manufacturing systems. A synopsis of the approaches to designing and implementing the real-time control software of these systems is presented. It is concluded that current methodologies support, in a very restricted sense, these planning, scheduling, and monitoring activities, and that enhanced performance can be achieved via an integrated approach.     

Implementing high-temperature short-time media treatment in commercial-scale cell culture manufacturing processes

The production of therapeutic proteins by mammalian cell culture is complex and sets high requirements for process, facility, and equipment design, as well as rigorous regulatory and quality standards. One particular point of concern and significant risk to supply chain is the susceptibility to contamination such as bacteria, fungi, mycoplasma, and viruses. Several technologies have been developed to create barriers for these agents to enter the process, e.g. filtration, UV inactivation, and temperature inactivation. However, if not implemented during development of the manufacturing process, these types of process changes can have significant impact on process performance if not managed appropriately. This article describes the implementation of the high-temperature short-time (HTST) treatment of cell culture media as an additional safety barrier against adventitious agents during the transfer of a large-scale commercial cell culture manufacturing process. The necessary steps and experiments, as well as subsequent results during qualification runs and routine manufacturing, are shown.     

Development of control serum for microbial antibody tests.

Control sera are an essential component of in-vitro clinical diagnostic reagents. We have developed a control serum for HBsAg, anti-HCV, anti-HIV and anti- Treponema pallidum testing. Since this control serum is prepared from human plasma, we paid special attention to viral safety. We incorporated three viral inactivation methods into the manufacturing process that maintain the necessary characteristics of a stable control serum.     

Automated calibration and in-line measurement of product quality during therapeutic monoclonal antibody purification using Raman spectroscopy

Current manufacturing and development processes for therapeutic monoclonal antibodies demand increasing volumes of analytical testing for both real-time process controls and high-throughput process development. The feasibility of using Raman spectroscopy as an in-line product quality measuring tool has been recently demonstrated and promises to relieve this analytical bottleneck. Here, we resolve time-consuming calibration process that requires fractionation and preparative experiments covering variations of product quality attributes (PQAs) by engineering an automation system capable of collecting Raman spectra on the order of hundreds of calibration points from two to three stock seed solutions differing in protein concentration and aggregate level using controlled mixing. We used this automated system to calibrate multi-PQA models that accurately measured product concentration and aggregation every 9.3 s using an in-line flow-cell. We demonstrate the application of a nonlinear calibration model for monitoring product quality in real-time during a biopharmaceutical purification process intended for clinical and commercial manufacturing. These results demonstrate potential feasibility to implement quality monitoring during GGMP manufacturing as well as to increase chemistry, manufacturing, and controls understanding during process development, ultimately leading to more robust and controlled manufacturing processes.     

Measuring residual solvents in pharmaceutical samples using fast gas chromatography techniques

Residual process solvents in pharmaceutical samples are monitored using gas chromatography (GC) with either flame ionization detection (FID) or mass spectrometry. Based on good manufacturing practices, measuring residual solvents is mandatory for the release testing of all active pharmaceutical ingredients and is routinely performed on samples of process intermediates. General GC methods have been developed to monitor solvents routinely used in the drug synthesis process. It is now possible to take advantage of GC equipment with faster temperature ramping capabilities, in combination with shorter capillary GC columns, to achieve a considerable gain in efficiency and a reduction in analysis turnaround time. In this paper, the development and implementation of fast GC methods for residual solvents testing will be discussed. Continued efforts to improve the efficiency of gas chromatography using existing technologies such as, the ThermoOrion Flash GC will also be discussed.     

Mesenchymal stromal cell therapy: progress in manufacturing and assessments of potency

Mesenchymal stromal cell (MSC) therapies have been pursued for a broad spectrum of indications but mixed reports on clinical efficacy have given rise to some degree of skepticism regarding the effectiveness of this approach. However, recent reports of successful clinical outcomes and regulatory approvals for graft-versus-host disease, Crohn's disease and critical limb ischemia have prompted a shift in this perspective. With hundreds of clinical trials involving MSCs currently underway and an increasing demand for large-scale manufacturing protocols, there is a critical need to develop standards that can be applied to processing methods and to establish consensus assays for both MSC processing control and MSC product release. Reference materials and validated, uniformly applied tests for quality control of MSC products are needed. Here, we review recent developments in MSC manufacturing technologies, release testing and potency assays. We conclude that, although MSCs hold considerable promise clinically, economies of scale have yet to be achieved although numerous bioreactor technologies for scalable production of MSCs exist. Additionally, rigorous disease-specific product testing and comprehensive understanding of mechanisms of action, which are linked to relevant process and product release potency assays, will be required to ensure that these therapies continue to be successful.     

Strain identification of commercial influenza vaccines by mass spectrometry

Current influenza vaccine manufacturing and testing timelines require that the constituent hemagglutinin (HA) and neuraminidase (NA) strains be selected each year approximately 10 months before the vaccine becomes available. The threat of a pandemic influenza outbreak requires that more rapid testing methods be found. We have developed a specialized on-filter sample preparation method that uses both trypsin and chymotrypsin to enzymatically digest peptide-N-glycosidase F (PNGase F)-deglycosylated proteins in vaccines. In tandem with replicate liquid chromatography-mass spectrometry (LC-MS) analyses, this approach yields sufficient protein sequencing data (>85% sequence coverage on average) for strain identification of HA and NA components. This has allowed the confirmation, and in some cases the correction, of the identity of the influenza strains in recent commercial vaccines as well as the correction of some ambiguous HA sequence annotations in available databases. This method also allows the identification of low-level contaminant egg proteins produced during the manufacturing process.     

Validation of biopharmaceutical purification processes for virus clearance evaluation

Any biopharmaceutical product that has involved the use of animal-derived material during the manufacturing process has the potential to be contaminated with animal viruses. To ensure safety of these products, extensive testing is performed on the starting materials, such as the cell banks, and on the raw materials used in manufacture. Additional testing is also performed at various stages of production and, in some cases, on the final product as well. Because of inherent limitations in direct testing methods, the capacity of the downstream purification process to remove/inactivate potential viral contaminants is also studied to give an extra degree of assurance that the final product will be free of infectious viruses.     

Practical considerations in clinical strategy to support the development of injectable drug-device combination products for biologics

The development of an injectable drug-device combination (DDC) product for biologics is an intricate and evolving process that requires substantial investments of time and money. Consequently, the commercial dosage form(s) or presentation(s) are often not ready when pivotal trials commence, and it is common to have drug product changes (manufacturing process or presentation) during clinical development. A scientifically sound and robust bridging strategy is required in order to introduce these changes into the clinic safely. There is currently no single developmental paradigm, but a risk-based hierarchical approach has been well accepted. The rigor required of a bridging package depends on the level of risk associated with the changes. Clinical pharmacokinetic/pharmacodynamic comparability or outcome studies are only required when important changes occur at a late stage. Moreover, an injectable DDC needs to be user-centric, and usability assessment in real-world clinical settings may be required to support the approval of a DDC. In this review, we discuss the common issues during the manufacturing process and presentation development of an injectable DDC and practical considerations in establishing a clinical strategy to address these issues, including key elements of clinical studies. We also analyze the current practice in the industry and review relevant and status of regulatory guidance in the DDC field.     

Development and validation of an affinity chromatography step using a peptide ligand for cGMP production of factor VIII

An affinity chromatography step was developed for purification of recombinant B-Domain Deleted Factor VIII (BDDrFVIII) using a peptide ligand selected from a phage display library. The peptide library had variegated residues, contained both within a disulfide bond-constrained ring and flanking the ring. The peptide ligand binds to BDDrFVIII with a dissociation constant of approximately 1 microM both in free solution and when immobilized on a chromatographic resin. The peptide is chemically synthesized and the affinity resin is produced by coupling the peptide to an agarose matrix preactivated with N-hydroxysuccinimide. Coupling conditions were optimized to give consistent and complete ligand incorporation and validated with a robustness study that tested various combinations of processing limits. The peptide affinity chromatographic operation employs conditions very similar to an immunoaffinity chromatography step currently in use for BDDrFVIII manufacture. The process step provides excellent recovery of BDDrFVIII from a complex feed stream and reduces host cell protein and DNA by 3-4 logs. Process validation studies established resin reuse over 26 cycles without changes in product recovery or purity. A robustness study using a factorial design was performed and showed that the step was insensitive to small changes in process conditions that represent normal variation in commercial manufacturing. A scaled-down model of the process step was qualified and used for virus removal studies. A validation package addressing the safety of the leached peptide included leaching rate measurements under process conditions, testing of peptide levels in product pools, demonstration of robust removal downstream by spiking studies, end product testing, and toxicological profiling of the ligand. The peptide ligand affinity step was scaled up for cGMP production of BDDrFVIII for clinical trials.     

Regulatory perspectives from Japan - comparability of biopharmaceuticals.

In Japan there is no official guideline about comparability assessment of biotechnological products at present. However, there is some notifications which should be referred to, when the manufacturer changes the manufacturing process. Here, regulatory perspectives from Japan on the comparability assessment are presented. When establishing the comparability of biotechnological products derived from different manufacturing processes and the validity of modified manufacturing process, rational step-by-step approaches based on both product and process aspects would be useful. At first, relevant physicochemical and biological properties of products including purity, impurity profiles and stability should be compared before and after the manufacturing change, depending on the type and nature of the desired products. It is also necessary to examine the capacities of the new manufacturing process for ensuring the consistent production of the active protein product as well as the anticipated elimination of potential impurities and contaminants. Further relevant assessment of preclinical and clinical comparability of product may be necessary in some cases.     

Integrated Modeling Framework for Manufacturing Systems: A Unified Representation of the Physical Process and Information System

The task of process modeling in a manufacturing environment centers around controlling and improving the flow of materials. This flow comprises a complicated web of control and physical systems. Despite a variety of manufacturing system modeling approaches, more rigorous process modeling is required. This paper presents an integrated modeling framework for manufacturing systems (IMF-M). Conceptual modeling of physical materials flow supported by a graphical representation facilitates improvement of operations in manufacturing environments. A declarative and executable representation of control information systems helps to improve information management by managing a variety of information models with improved readability and reusability. A unified representation of the physical process and information system provides a common modeling milieu in which efforts can be coordinated among several groups working in the different domains of scheduling, shop floor and logistics control, and information system. Since the framework helps adapt to the changes of the physical process and information system affecting each other in a consistent manner, the modeling output enhances integration of the manufacturing system.     

Characterization of a Monoclonal Antibody Cell Culture Production Process Using a Quality by Design Approach

The goal of quality by design (QbD) in cell culture manufacturing is to develop manufacturing processes which deliver products with consistent critical quality attributes (CQAs). QbD approaches can lead to better process understanding through the use of process parameter risk ranking and statistical design of experiments (DOE). The QbD process starts with an analysis of process parameter risk with respect to CQAs and key performance indicators (KPIs). Initial DOE study designs and their factor test ranges are based on the outcomes of the process parameter risk ranking exercises. Initial DOE studies screen factors for significant influences on CQAs as well as characterize responses for process KPIs. In the case study provided here, multifactor process characterization studies using a scale-down model resulted in significant variation in charge heterogeneity of a monoclonal antibody (MAb) as measured by ion-exchange chromatography (IEC). Iterative DOE studies, using both screening and response surface designs, were used to narrow the operating parameter ranges so that charge heterogeneity could be controlled to an acceptable level. The data from the DOE studies were used to predict worst-case conditions, which were then verified by testing at those conditions. Using the approach described here, multivariate process parameter ranges were identified that yield acceptable CQA levels and that still provide operational flexibility for manufacturing.     

Technology outlook for real-time quality attribute and process parameter monitoring in biopharmaceutical development—A review

Real-time monitoring of bioprocesses by the integration of analytics at critical unit operations is one of the paramount necessities for quality by design manufacturing and real-time release (RTR) of biopharmaceuticals. A well-defined process analytical technology (PAT) roadmap enables the monitoring of critical process parameters and quality attributes at appropriate unit operations to develop an analytical paradigm that is capable of providing real-time data. We believe a comprehensive PAT roadmap should entail not only integration of analytical tools into the bioprocess but also should address automated-data piping, analysis, aggregation, visualization, and smart utility of data for advanced-data analytics such as machine and deep learning for holistic process understanding. In this review, we discuss a broad spectrum of PAT technologies spanning from vibrational spectroscopy, multivariate data analysis, multiattribute chromatography, mass spectrometry, sensors, and automated-sampling technologies. We also provide insights, based on our experience in clinical and commercial manufacturing, into data automation, data visualization, and smart utility of data for advanced-analytics in PAT. This review is catered for a broad audience, including those new to the field to those well versed in applying these technologies. The article is also intended to give some insight into the strategies we have undertaken to implement PAT tools in biologics process development with the vision of realizing RTR testing in biomanufacturing and to meet regulatory expectations.