首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The present article describes two novel flexible plastic-based disposable bioreactors. The first one, the WU bioreactor, is based on the principle of a wave and undertow mechanism that provides agitation while offering convenient mixing and aeration to the plant cell culture contained within the bioreactor. The second one is a high aspect ratio bubble column bioreactor, where agitation and aeration are achieved through the intermittent generation of large diameter bubbles, "Taylor-like" or "slug bubbles" (SB bioreactor). It allows an easy volume increase from a few liters to larger volumes up to several hundred liters with the use of multiple units. The cultivation of tobacco and soya cells producing isoflavones is described up to 70 and 100 L working volume for the SB bioreactor and WU bioreactor, respectively. The bioreactors being disposable and pre-sterilized before use, cleaning, sterilization, and maintenance operations are strongly reduced or eliminated. Both bioreactors represent efficient and low cost cell culture systems, applicable to various cell cultures at small and medium scale, complementary to traditional stainless-steel bioreactors.  相似文献   

2.
近年来,国内中国仓鼠卵巢细胞(Chinese hamster ovary,CHO)生产罐的培养规模已达上千升,国外已达上万升,最终的生产罐前需要多级摇瓶、种子罐进行种子细胞扩增,扩增效率较低,严重影响了抗体、融合蛋白等生物制品的生产效率。文中利用WAVETM波浪式生物反应器,通过灌注培养的方法,成功地实现了种子细胞的高效扩增。WAVETM波浪式生物反应器灌注培养方法制备种子细胞,CHO细胞密度高达2.28×107cells/mL时仍处于指数生长期且细胞活力大于95%,以此细胞作为种子细胞,4×105cells/mL接种于另一个WAVETM生物反应器进行流加培养,最大活细胞密度仍可达1.73×107cells/mL。通过此种扩增方式,1台WAVETM20/50即可为1 000 L或2 000 L的生产罐提供种子细胞,种子细胞的扩增倍数(Split ratio)可以达到1∶50~1∶100倍,与传统不锈钢罐种子细胞扩增倍数1∶2~1∶10相比,可以显著减少2~3级种子罐,种子细胞的扩增时间减少7~9 d,极大地提高生产效率。  相似文献   

3.
Plant cell suspension cultures and hairy roots are potential sources of secondary metabolites and recombinant proteins. In contrast to traditionally grown “whole wild plants” or “whole transgenic plants”, their production in bioreactors guarantees defined controlled process conditions and therefore minimizes or even prevents variations in product yield and quality, which simplifies process validation and product registration. Moreover, bioreactors and their configuration significantly affect cultivation results by accomplishing and controlling the optimum environment for effective cell growth and production of bioactive substances. This review highlights the main design criteria of the most widely used bioreactor types, both for plant cell suspension cultures and for hairy roots, and outlines suitable low-cost disposable bioreactors which have found increasing acceptance over the last 10 years. Plants for human health in the post-genome era, PSE congress 26.8.2007–29.8.2007, Helsinki.  相似文献   

4.
The present article describes two new applications of plastic-based cell culture systems in the plant biotechnology domain. Different types of bioreactors are used at Nestlé R&D Center-Tours for large scale culture of plants cells to produce metabolites or recombinant proteins and for mass propagation of selected plant varieties by somatic embryogenesis. Particularly, recent studies are directed to cut down the production costs of these two processes by developing disposable cell culture systems. For large scale culture, two novel flexible plastic-based disposable bioreactors have been developed from 10 to 100 l working volumes, validated with several plant species (“Wave and Undertow” and “Slug Bubble” bioreactors). Vegetative propagation of elite plant varieties is achieved through somatic embryogenesis in liquid medium. A pilot scale process has been recently set up for the industrial propagation of Coffea canephora (Robusta coffee). The current production capacity is 2.5–3.0 million embryos per year. The pre-germination of the embryos was previously conducted by temporary immersion in liquid medium in 10-l glass bioreactors. An improved process has been developed using a 10-l disposable bioreactor consisting in a bag containing a rigid plastic box (“Box-in-Bag” bioreactor), insuring, amongst other advantages, a higher light transmittance to the biomass due to its horizontal design.  相似文献   

5.
Anchorage‐dependent cell cultures are used for the production of viruses, viral vectors, and vaccines, as well as for various cell therapies and tissue engineering applications. Most of these applications currently rely on planar technologies for the generation of biological products. However, as new cell therapy product candidates move from clinical trials towards potential commercialization, planar platforms have proven to be inadequate to meet large‐scale manufacturing demand. Therefore, a new scalable platform for culturing anchorage‐dependent cells at high cell volumetric concentrations is urgently needed. One promising solution is to grow cells on microcarriers suspended in single‐use bioreactors. Toward this goal, a novel bioreactor system utilizing an innovative Vertical‐Wheel? technology was evaluated for its potential to support scalable cell culture process development. Two anchorage‐dependent human cell types were used: human lung carcinoma cells (A549 cell line) and human bone marrow‐derived mesenchymal stem cells (hMSC). Key hydrodynamic parameters such as power input, mixing time, Kolmogorov length scale, and shear stress were estimated. The performance of Vertical‐Wheel bioreactors (PBS‐VW) was then evaluated for A549 cell growth and oncolytic adenovirus type 5 production as well as for hMSC expansion. Regarding the first cell model, higher cell growth and number of infectious viruses per cell were achieved when compared with stirred tank (ST) bioreactors. For the hMSC model, although higher percentages of proliferative cells could be reached in the PBS‐VW compared with ST bioreactors, no significant differences in the cell volumetric concentration and expansion factor were observed. Noteworthy, the hMSC population generated in the PBS‐VW showed a significantly lower percentage of apoptotic cells as well as reduced levels of HLA‐DR positive cells. Overall, these results showed that process transfer from ST bioreactor to PBS‐VW, and scale‐up was successfully carried out for two different microcarrier‐based cell cultures. Ultimately, the data herein generated demonstrate the potential of Vertical‐Wheel bioreactors as a new scalable biomanufacturing platform for microcarrier‐based cell cultures of complex biopharmaceuticals. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1600–1612, 2015  相似文献   

6.
Bioreactors provide a rapid and efficient plant propagation system for many agricultural and forestry species, utilizing liquid media to avoid intensive manual handling. Large-scale liquid cultures have been used for micropropagation through organogenesis or somatic embryogenesis pathways. Various types of bioreactors with gas-sparged mixing are suitable for the production of clusters of buds, meristems or protocorms. A simple glass bubble-column bioreactor for the proliferation of ornamental and vegetable crop species resulted in biomass increase of 3 to 6-fold in 3–4 weeks. An internal loop bioreactor was used for asparagus, celery and cucumber embryogenic cultures. However, as the biomass increased, the mixing and circulation were not optimal and growth was reduced. A disposable pre-sterilized plastic bioreactor (2–5-l volume) was used for the proliferation of meristematic clusters of several ornamental, vegetable and woody plant species. The plastic bioreactor induced minimal shearing and foaming, resulting in an increase in biomass as compared to the glass bubble-column bioreactor. A major issue related to the use of liquid media in bioreactors is hyperhydricity, that is, morphogenic malformation. Liquid cultures impose stress signals that are expressed in developmental aberrations. Submerged tissues exhibit oxidative stress, with elevated concentrations of reactive oxygen species associated with a change in antioxidant enzyme activity. These changes affect the anatomy and physiology of the plants and their survival. Malformation was controlled by adding growth retardants to decrease rapid proliferation. Growth retardants ancymidol or paclobutrazol reduced water uptake during cell proliferation, decreased vacuolation and intercellular spaces, shortened the stems and inhibited leaf expansion, inducing the formation of clusters. Using a two-stage bioreactor process, the medium was changed in the second stage to a medium lacking growth retardants to induce development of the meristematic clusters into buds or somatic embryos. Cluster biomass increased 10–15-fold during a period of 25–30 days depending on the species. Potato bud clusters cultured in 1.5 1 of medium in a 2-l capacity bioreactor, increased during 10–30 days. Poplar in vitro roots regenerated buds in the presence of thidiazuron (TDZ); the biomass increased 12-fold in 30 days. Bioreactor-regenerated clusters were separated with a manual cutter, producing small propagule units that formed shoots and initiated roots. Clusters of buds or meristematic nodules with reduced shoots, as well as arrested leaf growth, had less distortion and were optimal for automated cutting and dispensing. In tuber-, bulb- and corm-producing plants, growth retardants and elevated sucrose concentrations in the media were found to enhance storage organ formation, providing a better propagule for transplanting or storage. Bioreactor-cultures have several advantages compared with agar-based cultures, with a better control of the contact of the plant tissue with the culture medium, and optimal nutrient and growth regulator supply, as well as aeration and medium circulation, the filtration of the medium and the scaling-up of the cultures. Micropropagation in bioreactors for optimal plant production will depend on a better understanding of plant responses to signals from the microenvironment and on specific culture manipulation to control the morphogenesis of plants in liquid cultures.  相似文献   

7.
Disposable bioreactors have increasingly been incorporated into preclinical, clinical, and production-scale biotechnological facilities over the last few years. Driven by market needs, and, in particular, by the developers and manufacturers of drugs, vaccines, and further biologicals, there has been a trend toward the use of disposable seed bioreactors as well as production bioreactors. Numerous studies documenting their advantages in use have contributed to further new developments and have resulted in the availability of a multitude of disposable bioreactor types which differ in power input, design, instrumentation, and scale of the cultivation container. In this review, the term “disposable bioreactor” is defined, the benefits and constraints of disposable bioreactors are discussed, and critical phases and milestones in the development of disposable bioreactors are summarized. An overview of the disposable bioreactors that are currently commercially available is provided, and the domination of wave-mixed, orbitally shaken, and, in particular, stirred disposable bioreactors in animal cell-derived productions at cubic meter scale is reported. The growth of this type of reactor system is attributed to the recent availability of stirred disposable benchtop systems such as the Mobius CellReady 3 L Bioreactor. Analysis of the data from computational fluid dynamic simulation studies and first cultivation runs confirms that this novel bioreactor system is a viable alternative to traditional cell culture bioreactors at benchtop scale.  相似文献   

8.
Quantifying the influence of flow conditions on cell viability is essential for a successful control of cell growth and cell damage in major biotechnological applications, such as in recombinant protein and antibody production or vaccine manufacturing. In the last decade, new bioreactor types have been developed. In particular, bioreactors with wave‐induced motion show interesting properties (e.g., disposable bags suitable for cGMP manufacturing, no requirement for cleaning and sterilization of cultivation vessels, and fast setup of new production lines) and are considered in this study. As an additional advantage, it is expected that cultivations in such bioreactors result in lower shear stress compared with conventional stirred tanks. As a consequence, cell damage would be reduced as cell viability is highly sensitive to hydrodynamic conditions. To check these assumptions, an experimental setup was developed to measure the most important flow parameters (liquid surface level, liquid velocity, and liquid and wall shear stress) in two cellbag sizes (2 and 20 L) of Wave Bioreactors®. The measurements confirm in particular low shear stress values in both cellbags, indicating favorable hydrodynamic conditions for cell cultivation. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011  相似文献   

9.
Summary Proliferation of meristematic clusters of several plants in an inexpensive airlift bioreactor system, consisting of a disposable presterilized light transmittable plastic film vessel is described. The optimal shape, size, and structural function of the disposable plastic bioreactor are based on the bubble column and airlift glass bioreactors. The disposable bioreactors are designed in a conical configuration with a single inoculation and harvest port and multiple use dispensing and mixing accessories. Shearing damage and foaming problems known to exist in bioreactors due to the plant's rigid cell wall and size were greatly reduced in the disposable plastic bioreactors. The disposable bioreactors were used for propagule proliferation and growth, using meristem and bud clusters of potato, fern, banana, and gladiolus. The clusters' biomass increased five-to eightfold over a period of 26–30 d, depending on the species. The clusters were separated mechanically by a chopper made of a grid of knives. The chopped propagules were inoculated to agar medium for further growth and developed into transplantable plants. In the case of gladiolus and potato, corms and tubers developed in a sucrose-elevated storage organ induction medium, respectively, after the initial formation of small shoots. The plantlets and storage organs were transplanted to an acclimation greenhouse and continued to grow with a 95–100% survival, depending on the species. Plant development was followed for a period of 16 wk in fern and 12–14 wk in potato, banana, and gladiolus and normal shoot and leaf growth was observed. The feasibility of large-scale liquid cultures for plant micropropagation is discussed.  相似文献   

10.
We describe methods for the large-scale in vitro culturing of synchronous and asynchronous blood-stage Plasmodium falciparum parasites in sterile disposable plastic bioreactors controlled by wave-induced motion (wave bioreactor). These cultures perform better than static flask cultures in terms of preserving parasite cell cycle synchronicity and reducing the number of multiple-infected erythrocytes. The straight-forward methods described here will facilitate the large scale production of malaria parasites for antigen and organelle isolation and characterisation, for the high throughput screening of compound libraries with whole cells or extracts, and the development of live- or whole-cell malaria vaccines under good manufacturing practice compliant standards.  相似文献   

11.
Inducible transgene expression technologies are of unmatched potential for biopharmaceutical manufacturing of unstable, growth-impairing and cytotoxic proteins as well as conditional metabolic engineering to improve desired cell phenotypes. Currently available transgene dosing modalities which rely on physical parameters or small-molecule drugs for transgene fine-tuning compromise downstream processing and/or are difficult to implement technologically. The recently designed gas-inducible acetaldehyde-inducible regulation (AIR) technology takes advantage of gaseous acetaldehyde to modulate product gene expression levels. At regulation effective concentrations gaseous acetaldehyde is physiologically inert and approved as food additive by the Federal Drug Administration (FDA). During standard bioreactor operation, gaseous acetaldehyde could simply be administered using standard/existing gas supply tubing and eventually eliminated by stripping with inducer-free air. We have determined key parameters controlling acetaldehyde transfer in three types of bioreactors and designed a mass balance-based model for optimal product gene expression fine-tuning using gaseous acetaldehyde. Operating a standard stirred-tank bioreactor set-up at 10 L scale we have validated AIR technology using CHO-K1-derived serum-free suspension cultures transgenic for gas-inducible production of human interferon-beta (IFN-beta). Gaseous acetaldehyde-inducible IFN-beta production management was fully reversible while maintaining cell viability at over 95% during the entire process. Compatible with standard bioreactor design and downstream processing procedures AIR-based technology will foster novel opportunities for pilot and large-scale manufacturing of difficult-to-produce protein pharmaceuticals.  相似文献   

12.
Decreasing the timeframe for cell culture process development has been a key goal toward accelerating biopharmaceutical development. Advanced Microscale Bioreactors (ambr?) is an automated micro‐bioreactor system with miniature single‐use bioreactors with a 10–15 mL working volume controlled by an automated workstation. This system was compared to conventional bioreactor systems in terms of its performance for the production of a monoclonal antibody in a recombinant Chinese Hamster Ovary cell line. The miniaturized bioreactor system was found to produce cell culture profiles that matched across scales to 3 L, 15 L, and 200 L stirred tank bioreactors. The processes used in this article involve complex feed formulations, perturbations, and strict process control within the design space, which are in‐line with processes used for commercial scale manufacturing of biopharmaceuticals. Changes to important process parameters in ambr? resulted in predictable cell growth, viability and titer changes, which were in good agreement to data from the conventional larger scale bioreactors. ambr? was found to successfully reproduce variations in temperature, dissolved oxygen (DO), and pH conditions similar to the larger bioreactor systems. Additionally, the miniature bioreactors were found to react well to perturbations in pH and DO through adjustments to the Proportional and Integral control loop. The data presented here demonstrates the utility of the ambr? system as a high throughput system for cell culture process development. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:718–727, 2014  相似文献   

13.
The accelerating development of gene therapy from research towards clinical trials and beyond has elevated the demand for practical viral vector-manufacturing solutions. The use of disposable upstream technology is gaining traction in clinical manufacturing. Packed-bed or fixed-bed reactors, where column is packed with immobilized biocatalyst particles providing surface to constrain the cells in a particular region of the reactor, have been widely used in bioprocessing applications since mid-1900s. However, the world's first single-use, fully integrated, high cell density, fixed-bed bioreactor was launched only approximately a decade ago. By now, several single-use, fixed-bed technology solutions have been developed in a small scale. Scaling-up the manufacturing can be challenging and for commercial-scale manufacturing, there is practically only one single-use, good manufacturing practice-compliant option available. This study reviews the latest, fully disposable, fixed-bed bioreactors; compares the virus production in the different systems; and discusses important manufacturing cost-related topics. It is predicted that single-use, fixed-bed bioreactors will receive even more attention in the field of viral vector manufacturing and commercialization, especially with the need for higher virus titers and virus yields.  相似文献   

14.
More than a century has passed since the first attempt to cultivate plant cells in vitro. During this time, plant cell cultures have become increasingly attractive and cost-effective alternatives to classical approaches for the mass production of plant-derived metabolites. Furthermore, plant cell culture is the only economically feasible way of producing some high-value metabolites (e.g., paclitaxel) from rare and/or threatened plants. This review summarizes recent advances in bioprocessing aspects of plant cell cultures, from callus culture to product formation, with particular emphasis on the development of suitable bioreactor configurations (e.g., disposable reactors) for plant cell culture-based processes; the optimization of bioreactor culture environments as a powerful means to improve yields; bioreactor operational modes (fed-batch, continuous, and perfusion); and biomonitoring approaches. Recent trends in downstream processing are also considered. This paper is dedicated to Prof. Dr. Mladenka P. Ilieva on the occasion of her 70th birthday.  相似文献   

15.
Development of bioprocesses with mammalian cell culture deals with different bioreactor types and scales. The bioreactors might be intended for generation of cell inoculum and production, research, process development, validation, or transfer purposes. During these activities, not only the difficulty of up and downscaling might lead to failure of consistency in cell growth, but also the use of different bioreactor geometries and operation conditions. In such cases, criteria for bioreactor design and process transfer should be carefully evaluated in order to select appropriate cultivation parameters. In this work, power input, mixing time, impeller tip speed, and Reynolds number have been compared systematically for the cultivation of the human cell line AGE1.HN within three partner laboratories using five different bioreactor systems. Proper operation ranges for the bioreactors were identified using the maximal cell‐specific growth rate (μmax) as indicator. Common optimum values for process transfer criteria were found in these geometrically different bioreactors, in which deviations of μmax between cultivation systems can be importantly reduced. The data obtained in this work are used for process standardization and comparability of results obtained in different bioreactor systems, i.e. to guarantee lab‐to‐lab consistency for systems biology approaches using mammalian cells.  相似文献   

16.
While wave‐mixed and stirred bag bioreactors are common devices for rapid, safe insect cell culture‐based production at liter‐scale, orbitally shaken disposable flasks are mainly used for screening studies at milliliter‐scale. In contrast to the two aforementioned bag bioreactor types, which can be operated with standard or disposable sensors, shaker flasks have not been instrumented until recently. The combination of 250 mL disposable shake flasks with PreSens's Shake Flask Reader enables both pH and dissolved oxygen to be measured, as well as allowing characterization of oxygen mass transfer. Volumetric oxygen transfer coefficients (kLa‐values) for PreSens 250 mL disposable shake flasks, which were determined for the first time in insect cell culture medium at varying culture volumes and shaker frequencies, ranged between 4.4 and 37.9/h. Moreover, it was demonstrated that online monitoring of dissolved oxygen in shake flasks is relevant for limitation‐free growth of insect cells up to high cell densities in batch mode (1.6×107 cells/mL) and for the efficient expression of an intracellular model protein.  相似文献   

17.
Bioreactor technology is vital for tissue engineering. Usually, bioreactors are used to provide a tissue-specific physiological in vitro environment during tissue maturation. In addition to this most obvious application, bioreactors have the potential to improve the efficiency of the overall tissue-engineering concept. To date, a variety of bioreactor systems for tissue-specific applications have been developed. Of these, some systems are already commercially available. With bioreactor technology, various functional tissues of different types were generated and cultured in vitro. Nevertheless, these efforts and achievements alone have not yet led to many clinically successful tissue-engineered implants. We review possible applications for bioreactor systems within a tissue-engineering process and present basic principles and requirements for bioreactor development. Moreover, the use of bioreactor systems for the expansion of clinically relevant cell types is addressed. In contrast to cell expansion, for the generation of functional three-dimensional tissue equivalents, additional physical cues must be provided. Therefore, bioreactors for musculoskeletal tissue engineering are discussed. Finally, bioreactor technology is reviewed in the context of commercial constraints.  相似文献   

18.
Single-use bioreactors (SUBs, or disposable bioreactors) are extensively used for the clinical and commercial production of biologics. Despite widespread application, minimal results have been reported utilizing the turndown ratio; an operation mode where the working range of the bioreactor can be expanded to include low fluid volumes. In this work, a systematic investigation into free surface mass transfer and cell growth in high turndown single-use bioreactors is presented. This approach, which combines experimental mass transfer measurements with numerical simulation, deconvolutes the combined effects of headspace mixing and the free surface convective mass transfer on cell growth. Under optimized conditions, mass transfer across the interface alone may be sufficient to satisfy oxygen demands of the cell culture. Within the context of high turndown bioreactors, this finding provides a counterpoint to traditional sparge-based bioreactor operational philosophy. Multiple monoclonal antibody-producing cell lines grown using this high turndown approach showed similar viable cell densities to those cells expanded using a traditional cell bag rocker. Furthermore, cells taken directly from the turndown expansion and placed into production showed identical growth characteristics to traditionally expanded cultures. Taken together, these results suggest that the Xcellerex SUB can be run at a 5:1 working volume as a seed to itself, with no need for system modifications, potentially simplifying preculture operations.  相似文献   

19.
As microbial secretory expression systems have become well developed for microbial yeast cells, such as Saccharomyces cerevisiae and Pichia pastoris, it is advantageous to develop high cell density continuous perfusion cultures of microbial yeast cells to retain the live and productive yeast cells inside the perfusion bioreactor while removing the dead cells and cell debris along with the secreted product protein in the harvest stream. While the previously demonstrated inclined or lamellar settlers can be used for such perfusion bioreactors for microbial cells, the size and footprint requirements of such inefficiently scaled up devices can be quite large in comparison to the bioreactor size. Faced with this constraint, we have now developed novel, patent‐pending compact cell settlers that can be used more efficiently with microbial perfusion bioreactors to achieve high cell densities and bioreactor productivities. Reproducible results from numerous month‐long perfusion culture experiments using these devices attached to the 5 L perfusion bioreactor demonstrate very high cell densities due to substantial sedimentation of the larger live yeast cells which are returned to the bioreactor, while the harvest stream from the top of these cell settlers is a significantly clarified liquid, containing less than 30% and more typically less than 10% of the bioreactor cell concentration. Size of cells in the harvest is smaller than that of the cells in the bioreactor. Accumulated protein collected from the harvest and rate of protein accumulation is significantly (> 6x) higher than the protein produced in repeated fed‐batch cultures over the same culture duration. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:913–922, 2017  相似文献   

20.
The adoption of plant cell cultures as an industrial process depends greatly on the economics of such a process. The multicycle or draw-fill culture technique is one method for improving the productivity and, hence, cost of a process. Mathematical models have been devised for the functional relationships between the nominal costs of biomass and secondary metabolites and the plant cell growth characteristics in a multicycle growth system. The models were used to evaluate the data obtained with cultures of Dioscorea deltoidea (which produces diosgenin) and Panax ginseng, grown in various types of bioreactors. The multicycle system gave an increase of 1.5-2 in biomass productivity compared with batch culture, but was probably only commercially viable if the cost of the process in the bioreactor was at least 30 times that of the medium and if an inoculum of about 30% of the culture of the previous cycle was left in the bioreactor. In the multicycle system incompletely utilised nutrient or metabolite accumulation can only reach 1.43 times or less that of the initial values. With the P. ginseng culture, about 75% of the calculated maximum cell packing density per fresh weight (approximately 530 g 1-1) in this regime was achieved. The possibility of growth in the standard bioreactor of a shear sensitive type culture was shown with a marine impeller speed up to 330 cm s-1.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号