Copper-resistant enteric bacteria from United Kingdom and Australian piggeries.

Thirty-three enteric isolates from Australian (Escherichia coli only) and United Kingdom (U.K.) (Salmonella sp., Citrobacter spp., and E. coli) piggeries were characterized with respect to their copper resistance. The copper resistance phenotypes of four new Australian E. coli isolates were comparable with that of the previously studied E. coli K-12 strain ED8739(pRJ1004), in that the resistance level in rich media was high (up to 18 mM CuSO4) and resistance was inducible. Copper resistance was transferable by conjugation from the new Australian isolates to E. coli K-12 recipients. DNA similarity between the new Australian isolates and the pco copper resistance determinant located on plasmid pRJ1004 was strong as measured by DNA-DNA hybridization; however, the copper resistance plasmids were nonidentical as indicated by the presence of restriction fragment length polymorphisms between the plasmids. DNA-DNA hybridization and polymerase chain reaction analysis demonstrated DNA homology between the pco determinant and DNA from the U.K.E. coli, Salmonella sp., and Citrobacter freundii isolates. However, the copper resistance level and inducibility were variable among the U.K. strains. Of the U.K. E. coli isolates, 1 demonstrated a high level of copper resistance, 4 exhibited intermediate resistance, and 16 showed a low level of copper resistance; all of these resistances were expressed constitutively. A single U.K. C. freundii isolate, had a high level of copper resistance, inducible by subtoxic levels of copper. Transconjugants from one E. coli and one C. freundii donor, with E. coli K-12 strain UB1637 as a recipient, showed copper resistance levels and inducibility of resistance which differed from that expressed from plasmid pRJ1004.(ABSTRACT TRUNCATED AT 250 WORDS)     

Inducible plasmid-mediated copper resistance in Escherichia coli

The copper resistance in Escherichia coli determined by plasmid pRJ1004 is inducible. The level of resistance is proportional to the inducing dose of copper. The level of copper resistance in induced and uninduced cells changes with the growth phase of the culture. Induced resistant cells accumulate less copper than uninduced cells, so that reduced accumulation may be the mechanism of resistance. We propose that the inducible plasmid-coded copper resistance interacts with the normal metabolism of the cell to protect against toxic levels of copper while allowing continued operation of copper-dependent functions.     

Molecular genetics and transport analysis of the copper-resistance determinant (pco) from Escherichia coli plasmid pRJ1004

The copper-resistance determinant ( pco ) of Escherichia coli plasmid pRJ1004 was cloned and sequenced. Tn 1000 transposon mutagenesis identified four complementation groups, mutations in any of which eliminated copper resistance. DNA sequence analysis showed that the four complementation groups contained six open reading frames, designated pcoABCDRS . The protein product sequences derived from the nucleotide sequence show close homology between this copper-resistance system and the cop system of a plasmid pPT23D of Pseudomonas syringae pv. tomato . The PcoR and PcoS protein sequences show homology to the family of two-component sensor/responder phosphokinase regulatory systems. A seventh reading frame ( pcoE ) was identified from DNA sequence data, and lies downstream of a copper-regulated promoter. Transport assays with ⁶⁴Cu(II) showed that the resistant cells containing the plasmid had reduced copper accumulation during the log phase of growth, while increased accumulation had previously been observed during stationary phase. Chromosomal mutants defective in cellular copper management were obtained and characterized. In two of these mutants pco resistance was rendered totally inactive, whilst in another two mutants pco complemented the defective genes. These data indicate that plasmid-borne copper resistance in E. coli is linked with chromosomal systems for copper management.     

Incompatibility and molecular relationships between small bacteriocinogenic plasmids of Staphylococcus aureus

The sequence relations between small bacteriocinogenic plasmids (pRJ6, pRJ9, pRJ10 and pRJ11) of Staphylococcus aureus were investigated by comparing restriction maps and by hybridization. Plasmids pRJ10 and pRJ11 showed identical restriction maps, similar to that of pRJ9. The restriction map of pRJ6 differed from those of pRJ9 and pRJ10/pRJ11. Both groups of plasmids were shown to share a region of homology of at least 2.6 kb. The incompatibility relationships between them were also investigated by using plasmid derivatives tagged with transposon Tn551. Plasmids pRJ6 and pRJ9 proved to belong to different incompatibility groups.     

Characterization of a novel bacteriocin-encoding plasmid found in clinical isolates of Staphylococcus aureus

Plasmids specifying bacteriocin production and immunity to its action were found in three clinical isolates of Staphylococcus aureus obtained in different hospitals located in Rio de Janeiro. These plasmids (pRJ28, pRJ29 and pRJ30) of 8.0 kb were found to generate identical restriction fragment patterns upon digestion with several enzymes, although the range of strains susceptible to the respective bacteriocin varied among the producer strains, when different Gram-positive bacteria were used as indicators. pRJ29 was then chosen for further characterization in order to compare it with pRJ6 and pRJ9, two small bacteriocin-encoding plasmids previously described in strains isolated from food. pRJ29 was found to code for a bacteriocin with chemical properties (sensitivity to proteases, heat resistance, activity under anaerobiosis, and estimated molecular weight) similar to those of pRJ6-encoded bacteriocin, conferring cross-immunity to it. However, its restriction map differed from those of pRJ6 and pRJ9. These studies together with hybridization, incompatibility, and mobilization analyses using a derivative of pRJ29 tagged with Tn917-lac suggest that pRJ29 is a mosaic composed of genetic determinants found on pRJ6 and pRJ9, and that IS 257 was not involved in the recombination events which gave rise to pRJ29.     

Identification of iron Superoxide dismutase and a copper/zinc Superoxide dismutase enzyme activity within the marine cyanobacterium Synechococcus sp. WH 7803

Abstract Three constitutive forms of Superoxide dismutase activity have been demonstrated in the cyanobacterial marine picoplankter Synechococcus sp. WH 7803 using polyacrylamide gel activity staining techniques. A protein which gave a positive non-haem iron stain on native polyacrylamide gels exhibited N-terminal similarity to both the iron Superoxide dismutase and the manganese Superoxide dismutase of Escherichia coli . The metal prosthetic group of each of the three activity bands was characterised by analysing their differential sensitivities to 5 mM H₂O₂, 2 mM cyanide and 2 mM of the copper chelator diethyldithiocarbamate. Three distinct Superoxide dismutase activities were observed, an iron Superoxide dismutase, a copper/zinc Superoxide dismutase and a third form which has not been identified. Growth of Synechococcus cells in ASW medium containing no added iron resulted in no alteration in the activity of the iron Superoxide dismutase. Growth of cultures in the absence of copper or zinc resulted in differential changes in the activities of the copper/zinc Superoxide dismutase and the unidentified Superoxide dismutase.     

Molecular cloning and purification of klebicin B

A novel klebicin, klebicin B, produced by an isolate of Klebsiella pneumoniae has been identified. It is encoded by a 5.5 kb plasmid, pKlebB-K17/80, which is mobilized into K. pneumoniae UNF5023 by a large plasmid found in the same strain. The 5.5 kb plasmid has been cloned into the high-copy-number vector pUC19 and the restriction map of the resulting recombinant plasmid pRJ180 has been determined. Using sub-cloning and transposon mutagenesis, the klebicin B structural gene, the klebicin B immunity gene and the mitomycin C (MC) sensitivity gene (lys) present on pRJ180 have been localized. Transposon inserts which inactivated klebicin production also abolished lysis protein production encoded by pRJ180, but did not affect klebicin B immunity. Using SDS-PAGE an MC-induced polypeptide of 85 kDa was observed in cultures of K. pneumoniae UNF5023(pRJ180). This polypeptide was absent in cultures carrying plasmid pRJ180 with a Tn1000 insert which inactivated klebicin production. Analysis of the polypeptides present in the medium of Escherichia coli JM83 hsdR(pRJ180) or K. pneumoniae UNF5023(pRJ180) indicated that the 85 kDa polypeptide is specifically secreted from the producing cell. Klebicin B has been purified, using gel filtration, from a cell-free extract of K. pneumoniae UNF5023(pRJ180) which had been induced with MC. After boiling in sample buffer the purified klebicin B gave rise to two peptides on SDS-PAGE, one of 85 kDa and the other of 11 kDa. Klebicin B-resistant mutants of K. pneumoniae UNF5023 were sensitive to klebicin A, colicin B and colicin D.     

Detection of heavy metal ion resistance genes in Gram-positive and Gram-negative bacteria isolated from a lead-contaminated site

Resistance to a range of heavy metal ions wasdetermined for lead-resistant and other bacteria whichhad been isolated from a battery-manufacturing sitecontaminated with high concentrations of lead. Several Gram-positive (belonging to the genera Arthrobacter and Corynebacterium) andGram-negative (Alcaligenes species) isolateswere resistant to lead, mercury, cadmium, cobalt,zinc and copper, although the levels of resistance tothe different metal ions were specific for eachisolate. Polymerase chain reaction, DNA-DNAhybridization and DNA sequencing were used to explorethe nature of genetic systems responsible for themetal resistance in eight of the isolates. SpecificDNA sequences could be amplified from the genomic DNAof all the isolates using primers for sections of themer (mercury resistance determinant on thetransposon Tn501) and pco (copperresistance determinant on the plasmid pRJ1004) geneticsystems. Positive hybridizations with mer andpco probes indicated that the amplified segmentswere highly homologous to these genes. Some of thePCR products were cloned and partially sequenced, andthe regions sequenced were highly homologous to theappropriate regions of the mer and pcodeterminants. These results demonstrate the widedistribution of mercury and copper resistance genes inboth Gram-positive and Gram-negative isolates obtainedfrom this lead-contaminated soil. In contrast, theczc (cobalt, zinc and cadmium resistance) andchr (chromate resistance) genes could not beamplified from DNAs of some isolates, indicating thelimited contribution, if any, of these genetic systemsto the metal ion resistance of these isolates.     

Slow-growing heterokaryons as potential intermediates in supernumerary chromosome transfer between biotypes of Colletotrichum gloeosporioides

The vegetative transfer of a supernumerary chromosome between two biotypes (A and B) of Colletotrichum gloeosporioides pathogenic on Stylosanthes spp. has been previously demonstrated. The mechanism of transfer is unknown, and transient heterokaryosis has been implicated as an intermediary step, but inter-biotype heterokaryons have not so far been isolated. Conidia of a hygromycin-resistant strain of biotype A and a phleomycin-resistant strain of biotype B were mixed, co-cultured and plated on media containing both antibiotics and extremely slow-growing colonies resistant to both antibiotics isolated using repeated hyphal tip sub-culturing. Mononucleate conidia derived from these colonies were unable to germinate on media containing both antibiotics, but were able to germinate on media containing only one antibiotic, with hygromycin-resistant colonies predominating, indicating that unbalanced heterokaryons had formed. The heterokaryons had highly impaired growth rates suggesting some incompatibility. DNA marker analysis confirmed their heterokaryon status. These results demonstrate that unfit inter-biotype heterokaryons can form and potentially provide an intermediate step for supernumerary chromosomal exchange.     

Escherichia coli mutants with an altered sensitivity to cecropin D.

Cecropins are a family of small, basic antibacterial polypeptides which can be isolated from pupae of immunized Lepidoptera. They are active against both gram-negative and gram-positive bacteria. We studied a mutant of Escherichia coli, strain SB1004, which is more sensitive to cecropin D than is the parental strain. The mutant was selected as resistant to a host range mutant of a Serratia marcescens phage. When the protein composition of the outer membrane was examined, strain SB1004 and some other phage-resistant mutants were found to be deficient in the OmpC protein. It was concluded that the OmpC protein is the receptor of the phage. Strain SB1004 was found to differ from other ompC mutants in being especially sensitive to hydrophobic antibiotics and to cecropin D. Furthermore, strain SB1004 has a tendency for spontaneous autolysis. A genetic analysis showed the mutations in strain SB1004 and a suppressor mutant to map in the ompC region. The activity of cecropin D against different strains of E. coli was specifically enhanced when divalent cations were absent. No such effect was found with cecropins A and B, which are less hydrophobic than the D form.     

Distinct groups of plasmids correlated with bacteriocin production in Staphylococcus aureus

The genetic basis of bacteriocin (Bac) production by six strains of Staphylococcus aureus was examined. Gene transfer experiments (in which the plasmids were tagged with the erythromycin resistance transposon Tn551) and plasmid-elimination experiments by growth at 43 degrees C associated bacteriocin production with a particular plasmid in each strain. The Bac plasmids could be separated into two distinct groups: the first comprised plasmids larger than 40 kb, which did not specify immunity to bacteriocins; the second comprised small plasmids (8.0-10.4 kb) which also specified immunity to bacteriocins. The sequence relations among the small plasmids (pRJ6, pRJ9, pRJ10 and pRJ11) were investigated by comparing restriction enzyme digest patterns and by hybridization. Plasmids pRJ10 and pRJ11 were indistinguishable and very closely related to plasmid pRJ9. Plasmid pRJ6, although different from the others, shared regions of sequence homology with them. No homology was found between plasmids pRJ6 or pRJ9 and the large Bac plasmids.     

The complete nucleotide sequence of the resistance plasmid R478: defining the backbone components of incompatibility group H conjugative plasmids through comparative genomics

Horizontal transfer of resistance determinants amongst bacteria can be achieved by conjugative plasmid DNA elements. We have determined the complete 274,762 bp sequence of the incompatibility group H (IncH) plasmid R478, originally isolated from the Gram negative opportunistic pathogen Serratia marcescens. This self-transferable extrachromosomal genetic element contains 295 predicted genes, of which 144 are highly similar to coding sequences of IncH plasmids R27 and pHCM1. The regions of similarity among these three IncH plasmids principally encode core plasmid determinants (i.e., replication, partitioning and stability, and conjugative transfer) and we conducted a comparative analysis to define the minimal IncHI plasmid backbone determinants. No resistance determinants are included in the backbone and most of the sequences unique to R478 were contained in a large contiguous region between the two transfer regions. These findings indicate that plasmid evolution occurs through gene acquisition/loss predominantly in regions outside of the core determinants. Furthermore, a modular evolution for R478 was signified by the presence of gene neighbors or operons that were highly related to sequences from a wide range of chromosomal, transposon, and plasmid elements. The conjugative transfer regions are most similar to sequences encoded on SXT, Rts1, pCAR1, R391, and pRS241d. The dual partitioning modules encoded on R478 resemble numerous sequences; including pMT1, pCTX-M3, pCP301, P1, P7, and pB171. R478 also codes for resistance to tetracycline (Tn10), chloramphenicol (cat), kanamycin (aphA), mercury (similar to Tn21), silver (similar to pMG101), copper (similar to pRJ1004), arsenic (similar to pYV), and tellurite (two separate regions similar to IncHI2 ter determinants and IncP kla determinants). Other R478-encoded sequences are related to Tn7, IS26, tus, mucAB, and hok, where the latter is surrounded by insLKJ, and could potentially be involved in post-segregation killing. The similarity to a diverse set of bacterial sequences highlights the ability of horizontally transferable DNA elements to acquire and disseminate genetic traits through the bacterial gene pool.     

Cloning of the replication region on the bacteriocinogenic plasmid pRJ9 of Staphylococcus aureus

Abstract A 5.8-kb Cla I fragment of pRJ9, a bacteriocinogenic plasmid of Sphylococcus aureus , was cloned in the unique Cla I site of pRJ5. The recombinant plasmid obtained, pRJ23, failed to confer bacteriocin production and immunity to bacteriocin on host cells. The cloned fragment was shown to contain the complete replicon of pRJ9. Attempts to clone the 4.4-kb Cla I fragment of pRJ9 were unsuccessful, apparently due to the inactivation of the basic replicon of the cloning vector. Therefore, plasmid pRJ5 cut at its Cla I site appears to be a suitable vector for cloning replication regions of plasmids that cab replicate in S. aureus .     

Revealing the latent mobilization capability of the staphylococcal bacteriocinogenic plasmid pRJ9

Plasmid pRJ9 is a non-self-mobilizable bacteriocinogenic plasmid from Staphylococcus aureus. Despite this feature, DNA sequencing and RT-PCR experiments showed that it presents a Mob region with three genes (mobCAB), transcribed as an operon. In silico analysis of the Mob proteins encoded by pRJ9 showed that they present all the conserved functional features reported until present as being essential for plasmid mobilization. Moreover, they showed a high identity to Mob proteins encoded by mobilizable plasmids from Staphylococcus spp., especially to those encoded by plasmid pRJ6, which presents four mob genes (mobCDAB). A putative oriT region was also found upstream of the pRJ9 mob operon. pRJ9 could only be successfully mobilized by pGO1 when pRJ6 was present in the same strain. Further experiments showed that the pRJ9 oriT can be recognized by the pRJ6 Mob proteins, confirming its functionality. As pRJ9 does not possess a mobD gene while pRJ6 does, the absence of this gene was believed to be responsible for its lack of mobilization. However, conjugation experiments with a donor strain carrying also mobD cloned into an S. aureus vector showed that pRJ9 does not become mobilized even in the presence of the protein MobD encoded by pRJ6. Therefore, the reasons for pRJ9 failure to be mobilized are presently unknown.     

A simple method for screening porphyrin secretion by colonies of Escherichia coli

Abstract Escherichia coli secretes porphyrins when exposed to 20 mM 1-thioglycerol. A method was devised to isolate mutants, which do not excrete porphyrins in the presence of thiols. DEAE-Sephadex beads were incorporated into plates growing colonies of E. coli . The secreted porphyrins on these plates formed a fluorescent halo around each colony, when the plates were viewed under long-wave ultraviolet light. Mutants were found, that formed either halo-less colonies or a colony with excess halo. This method of incorporating immobilized ion exchangers into plates may be useful in isolating non-secretor or super-secretor mutants of a variety of organisms.     

Single-strand breakage in DNA of Escherichia coli exposed to Cd2+.

When a growing culture of Escherichia coli was exposed to 3 X 10(-6) M Cd2+, 85 to 95% of the cells lost their ability to form colonies on agar plates. Loss of viability was accompanied by considerable single-strand breakage in the DNA, with no detectable increase in double-strand breaks. A direct correlation appeared to exist between the number of single-strand breaks and the concentrations of Cd2+ to which the cells were exposed. Exposure of DNA in vitro to a Cd2+ concentration of 3 X 10(-6) M or higher, followed by sedimentation in alkaline sucrose gradients, demonstrated no single-strand breaks. Cadmium-exposed cells recovered viability when incubated in Cd2+-free liquid medium containing 10 mM hydroxyurea. During the early period of recovery, there was a lag in the incorporation of labeled thymidine, but cellular DNA, at least in part, appeared to be repaired.     

Modification of sorbitol MacConkey medium containing cefixime and tellurite for isolation of Escherichia coli O157:H7 from radish sprouts

A modified version of sorbitol MacConkey medium containing cefixime and tellurite (CT-SMAC medium) was produced by adding salicin and 4-methylumbelliferyl-beta-D-galactopyranoside to CT-SMAC medium; this medium was designated CT-SSMAC medium and was used to isolate Escherichia coli O157:H7 from radish sprouts. Of 101 non-E. coli bacteria isolated from radish sprouts that produced colorless colonies similar to colonies of E. coli O157:H7 grown on CT-SMAC medium, 92 (91%) formed colonies that were red to pink or were beta-galactosidase negative and colorless on CT-SSMAC medium. On the other hand, colonies of E. coli O157:H7 strains were colorless and beta-galactosidase positive on CT-SSMAC medium. Our results suggest that CT-SSMAC medium is more selective than CT-SMAC medium for isolating E. coli O157:H7.     

Metal resistance and plasmid DNA in Thiobacillus ferrooxidans

The minimal inhibitory concentrations of copper and nickel were determined for each of fifteen isolates of T. ferrooxidans native to a Cu/Ni tailings environment. Ten isolates were inhibited by 160 mM Cu,²⁺ or less, and ten were inhibited by 160 mM Ni²⁺or less. The isolates were screened for plasmid DNA using an alkaline lysis method and CCC plasmid forms were confirmed using the Hintermann technique. Two isolates were found to be devoid of plasmid DNA, and only one isolate contained more than two plasmids. Variability existed in plasmid size, although the majority were larger than the standard pBR322 (4.3 kbp). One plasmid was selected for further analysis using restriction endonucleases. EcoRI, HindIII and KpnI all cleaved the plasmid in two locations, and PstI cleaved the plasmid in six locations. PstI-digested fragments of the plasmid were ligated into pBR322, and the recombinant plasmids were transformed into Escherichia coli ATCC 8739. Four genetically-different transformants resulted, and each was grown in media containing 2.0 mM Cu²⁺ and compared to the growth of a control under similar conditions. There was no conferred copper resistance in E. coli, although one recombinant plasmid appeared to decrease the tolerance for E. coli ATCC 8739 to Cu²⁺.     

Isolation and characterization of the yeast 3-phosphoglycerokinase gene (PGK) by an immunological screening technique

An immunological screening technique has been used for the detection of a specific antigen-producing clone in a bank of bacterial colonies containing hybrid plasmids. This technique involves covalent attachment of antiserum to cyanogen bromide-activated paper discs, contact of this paper with lysed colonies on agar plates, and finally detection of the bound antigen with 125I-labeled antibody. Using this method, we have identified an Escherichia coli colony, containing a yeast DNA insert in plasmid ColE1, that produces antigen which combines with antibody directed against purified yeast 3-phosphoglycerate kinase. The hybrid plasmid (pYe57E2) obtained by this procedure has been shown by both biochemical and genetic methods to contain the structural gene PGK for yeast 3-phosphoglycerate kinase. The location of the PGK structural gene on pYe56E2 was determined by immunological screening of E. coli colonies bearing plasmids containing various reconstructions of the original yeast DNA insert. Examination of the expression of the cloned yeast PGK gene in both E. coli and yeast has shown that functional enzyme is synthesized from the cloned gene in yeast, but not in E. coli.