Monitoring of accelerated naphthalene-biodegradation in a bioaugmented soil slurry

The effect of microbial inoculation on the mineralization of naphthalene in a bioslurry treatment was evaluated in soil slurry microcosms. Inoculation by Pseudomonas putida G7 carrying the naphthalene dioxygenase (nahA) gene resulted in rapid mineralization of naphthalene, whereas indigenous microorganisms in the PAH-contaminated soil required a 28 h adaptation period before significant mineralization occurred. The number of nahA-like gene copies increased in both the inoculated and non-inoculated soil as mineralization proceeded, indicating selection towards naphthalene dioxygenase producing bacteria in the microbial community. In addition, 16S rRNA analysis by denaturing gradient gel electrophoresis (DGGE) analysis showed that significant selection occurred in the microbial community as a result of biodegradation. However, the indigenous soil bacteria were not able to compete with the P. putida G7 inoculum adapted to naphthalene biodegradation, even though the soil microbial community slightly suppressed naphthalene mineralization by P. putida G7.     

A Targeted Real-Time PCR Assay for Studying Naphthalene Degradation in the Environment

A quantitative real-time polymerase chain reaction (PCR) assay was developed for monitoring naphthalene degradation during bioremediation processes. The phylogenetic affiliations of known naphthalene-hydroxylating dioxygenase genes were determined to target functionally related bacteria, and degenerate primers were designed on the basis of the close relationships among dioxygenase genes identified from naphthalene-degrading Proteobacteria. Evaluation of the amplification specificity demonstrated that the developed real-time PCR assay represents a rapid, precise means for the group-specific enumeration of naphthalene-degrading bacteria. According to validation with bacterial pure cultures, the assay discriminated between the targeted group of naphthalene dioxygenase sequences and genes in other naphthalene or aromatic hydrocarbon-degrading bacterial strains. Specific amplification of gene fragments sharing a high sequence similarity with the genes included in the assay design was also observed in soil samples recovered from large-scale remediation processes. The target genes could be quantified reproducibly at over five orders of magnitude down to 3 × 10² gene copies. To investigate the suitability of the assay in monitoring naphthalene biodegradation, the assay was applied in enumerating the naphthalene dioxygenase genes in a soil slurry microcosm. The results were in good agreement with contaminant mineralization and dot blot quantification of nahAc gene copies. Furthermore, the real-time PCR assay was found to be more sensitive than hybridization-based analysis.     

Horizontal transfer of catabolic plasmids and naphthalene biodegradation in open soil

The horizontal transfer of naphthalene biodegradation plasmids and the parallel process of its microbial degradation were studied for the first time. The tagged naphthalene-degrading strains bearing labeled biodegradation plasmids were used for the monitoring of horizontal plasmid transfer in open soil. The population kinetics of microorganisms, the survival rate and competitiveness of introduced strains, and the transfer of biodegradation plasmids to indigenous strains were investigated. The transfer of the labeled plasmid pNF142::TnMod-OTc to the introduced plasmid-free recipient P. putida KT2442 and to indigenous soil microorganisms of the genus Pseudomonas was shown both under selection pressure (in the presence of naphthalene) and in its absence. The 16S rRNA gene sequencing showed that the soil strains that had acquired plasmids were close to the species P. lini, P. frederiksbergensis, P. jessenii, P. graminis, P. putida, and P. alcaligenes. Thus, direct evidence of dissemination of the naphthalene biodegradation plasmids in microbial populations in open soil under selective and nonselective conditions has been obtained.     

Identification,cloning, and characterization of a multicomponent biphenyl dioxygenase from <Emphasis Type="Italic">Sphingobium yanoikuyae</Emphasis> B1

Sphingobium yanoikuyae B1 utilizes both polycyclic aromatic hydrocarbons (biphenyl, naphthalene, and phenanthrene) and monocyclic aromatic hydrocarbons (toluene, m- and p-xylene) as its sole source of carbon and energy for growth. The majority of the genes for these intertwined monocyclic and polycyclic aromatic pathways are grouped together on a 39 kb fragment of chromosomal DNA. However, this gene cluster is missing several genes encoding essential enzymatic steps in the aromatic degradation pathway, most notably the genes encoding the oxygenase component of the initial polycyclic aromatic hydrocarbon (PAH) dioxygenase. Transposon mutagenesis of strain B1 yielded a mutant blocked in the initial oxidation of PAHs. The transposon insertion point was sequenced and a partial gene sequence encoding an oxygenase component of a putative PAH dioxygenase identified. A cosmid clone from a genomic library of S. yanoikuyae B1 was identified which contains the complete putative PAH oxygenase gene sequence. Separate clones expressing the genes encoding the electron transport components (ferredoxin and reductase) and the PAH dioxygenase were constructed. Incubation of cells expressing the dioxygenase enzyme system with biphenyl or naphthalene resulted in production of the corresponding cis-dihydrodiol confirming PAH dioxygenase activity. This demonstrates that a single multicomponent dioxygenase enzyme is involved in the initial oxidation of both biphenyl and naphthalene in S. yanoikuyae B1.     

The effect of transposons on the expression of the naphthalene biodegradation genes in Pseudomonas putida BS202(NPL-1) and derivative strains

NPL-1 and its derivative plasmid pBS106, which control the degradation of naphthalene and salicylate, were found to contain class II transposons of the Tn3 family. These transposons are involved in intraplasmid rearrangements, such as deletions and inversions, and can influence the expression of the catabolic and regulatory genes borne by biodegradation plasmids. The formation of a strong NahR-independent constitutive promoter by the inversion of a DNA fragment may be responsible for changing the character of naphthalene dioxygenase synthesis from inducible (in the case of plasmid NPL-1) to constitutive (in the case of plasmid NPL-41). The stability of plasmids NPL-1 and NPL-41 in Pseudomonas putida strains grown on different substrates depends on the expression of the nah and tnp genes.Translated from Mikrobiologiya, Vol. 74, No. 1, 2005, pp. 79–86.Original Russian Text Copyright © 2005 by Sokolov, Kosheleva, Filonov, Boronin.     

Isolation and characterization of ethylbenzene degrading <Emphasis Type="Italic">Pseudomonas putida</Emphasis> E41

Pseudomonas putida E41 was isolated from oil-contaminated soil and showed its ability to grow on ethyl-benzene as the sole carbon and energy source. Moreover, P. putida E41 show the activity of biodegradation of ethylbenzene in the batch culture. E41 showed high efficiency of biodegradation of ethylbenzene with the optimum conditions (a cell concentration of 0.1 g wet cell weight/L, pH 7.0, 25°C, and ethylbenzene concentration of 50 mg/L) from the results of the batch culture. The maximum degradation rate and specific growth rate (μ_max) under the optimum conditions were 0.19+0.03 mg/mg-DCW (Dry Cell Weight)/h and 0.87+0.13 h⁻¹, respectively. Benzene, toluene and ethylbenzene were degraded when these compounds were provided together; however, xylene isomers persisted during degradation by P. putida E41. When using a bioreactor batch system with a binary culture with P. putida BJ10, which was isolated previously in our lab, the degradation rate for benzene and toluene was improved in BTE mixed medium (each initial concentration: 50 mg/L). Almost all of the BTE was degraded within 4 h and 70–80% of m-, p-, and o-xylenes within 11 h in a BTEX mixture (initial concentration: 50 mg/L each). In summary, we found a valuable new strain of P. putida, determined the optimal degradation conditions for this isolate and tested a mixed culture of E41 and BJ10 for its ability to degrade a common sample of mixed contaminants containing benzene, toluene, and xylene.     

Development of Catechol 2,3-Dioxygenase-Specific Primers for Monitoring Bioremediation by Competitive Quantitative PCR

Benzene, toluene, xylenes, phenol, naphthalene, and biphenyl are among a group of compounds that have at least one reported pathway for biodegradation involving catechol 2,3-dioxygenase enzymes. Thus, detection of the corresponding catechol 2,3-dioxygenase genes can serve as a basis for identifying and quantifying bacteria that have these catabolic abilities. Primers that can successfully amplify a 238-bp catechol 2,3-dioxygenase gene fragment from eight different bacteria are described. The identities of the amplicons were confirmed by hybridization with a 238-bp catechol 2,3-dioxygenase probe. The detection limit was 10² to 10³ gene copies, which was lowered to 10⁰ to 10¹ gene copies by hybridization. Using the dioxygenase-specific primers, an increase in catechol 2,3-dioxygenase genes was detected in petroleum-amended soils. The dioxygenase genes were enumerated by competitive quantitative PCR with a 163-bp competitor that was amplified using the same primers. Target and competitor sequences had identical amplification kinetics. Potential PCR inhibitors that could coextract with DNA, nonamplifying DNA, soil factors (humics), and soil pollutants (toluene) did not impact enumeration. Therefore, this technique can be used to accurately and reproducibly quantify catechol 2,3-dioxygenase genes in complex environments such as petroleum-contaminated soil. Direct, non-cultivation-based molecular techniques for detecting and enumerating microbial pollutant-biodegrading genes in environmental samples are powerful tools for monitoring bioremediation and developing field evidence in support of natural attenuation.     

Proteogenomic Characterization of Monocyclic Aromatic Hydrocarbon Degradation Pathways in the Aniline-Degrading Bacterium Burkholderia sp. K24

Burkholderia sp. K24, formerly known as Acinetobacter lwoffii K24, is a soil bacterium capable of utilizing aniline as its sole carbon and nitrogen source. Genomic sequence analysis revealed that this bacterium possesses putative gene clusters for biodegradation of various monocyclic aromatic hydrocarbons (MAHs), including benzene, toluene, and xylene (BTX), as well as aniline. We verified the proposed MAH biodegradation pathways by dioxygenase activity assays, RT-PCR, and LC/MS-based quantitative proteomic analyses. This proteogenomic approach revealed four independent degradation pathways, all converging into the citric acid cycle. Aniline and p-hydroxybenzoate degradation pathways converged into the β-ketoadipate pathway. Benzoate and toluene were degraded through the benzoyl-CoA degradation pathway. The xylene isomers, i.e., o-, m-, and p-xylene, were degraded via the extradiol cleavage pathways. Salicylate was degraded through the gentisate degradation pathway. Our results show that Burkholderia sp. K24 possesses versatile biodegradation pathways, which may be employed for efficient bioremediation of aniline and BTX.     

Degradation of Phenanthrene by Mutant Naphthalene-Degrading Pseudomonas putida Strains

Five naphthalene- and salicylate-utilizing Pseudomonas putida strains cultivated for a long time on phenanthrene produced mutants capable of growing on this substrate and 1-hydroxy-2-naphthoate as the sole sources of carbon and energy. The mutants catabolize phenanthrene with the formation of 1-hydroxy-2-naphthoate, 2-hydroxy-1-naphthoate, salicylate, and catechol. The latter products are further metabolized by the meta- and ortho-cleavage pathways. In all five mutants, naphthalene and phenanthrene are utilized with the involvement of plasmid-born genes. The acquired ability of naphthalene-degrading strains to grow on phenanthrene is explained by the fact that the inducible character of the synthesis of naphthalene dioxygenase, the key enzyme of naphthalene and phenanthrene degradation, becomes constitutive.     

Toluene biodegradation by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> F1: targeting culture stability in long-term operation

The stability of Pseudomonas putida F1, a strain harbouring the genes responsible for toluene degradation in the chromosome was evaluated in a bioscrubber under high toluene loadings and nitrogen limiting conditions at two dilution rates (0.11 and 0.27 h⁻¹). Each experiment was run for 30 days, period long enough for microbial instability to occur considering previously reported studies carried out with bacterial strains encoding the catabolic genes in the TOL plasmid. At all tested conditions, P. putida F1 exhibited stable performance as shown by the constant values of the specific toluene degradation yield, CO₂ produced versus toluene degraded yield, and biomass concentration within each steady state. Benzyl alcohol, a curing agent causing TOL plasmid deletion in Pseudomonas strains, was present in the cultivation medium as a result of the monooxygenation of toluene by the diooxygenase system of P. putida F1. However, no mutant population growing at the expense of the extracellular excreted carbon or lysis products was established in the chemostat as confirmed by the constant dissolved total organic carbon (TOC) concentration and fraction of toluene degrading cells (approx. 100%). In addition, batch experiments conducted with both lysis substrate and toluene simultaneously confirmed that P. putida F1 preferentially consumed toluene rather than extracellular excreted carbon.     

Detection and Enumeration of Aromatic Oxygenase Genes by Multiplex and Real-Time PCR

Our abilities to detect and enumerate pollutant-biodegrading microorganisms in the environment are rapidly advancing with the development of molecular genetic techniques. Techniques based on multiplex and real-time PCR amplification of aromatic oxygenase genes were developed to detect and quantify aromatic catabolic pathways, respectively. PCR primer sets were identified for the large subunits of aromatic oxygenases from alignments of known gene sequences and tested with genetically well-characterized strains. In all, primer sets which allowed amplification of naphthalene dioxygenase, biphenyl dioxygenase, toluene dioxygenase, xylene monooxygenase, phenol monooxygenase, and ring-hydroxylating toluene monooxygenase genes were identified. For each primer set, the length of the observed amplification product matched the length predicted from published sequences, and specificity was confirmed by hybridization. Primer sets were grouped according to the annealing temperature for multiplex PCR permitting simultaneous detection of various genotypes responsible for aromatic hydrocarbon biodegradation. Real-time PCR using SYBR green I was employed with the individual primer sets to determine the gene copy number. Optimum polymerization temperatures for real-time PCR were determined on the basis of the observed melting temperatures of the desired products. When a polymerization temperature of 4 to 5°C below the melting temperature was used, background fluorescence signals were greatly reduced, allowing detection limits of 2 × 10² copies per reaction mixture. Improved in situ microbial characterization will provide more accurate assessment of pollutant biodegradation, enhance studies of the ecology of contaminated sites, and facilitate assessment of the impact of remediation technologies on indigenous microbial populations.     

Isolation and characterization of naphthalene-catabolic genes and plasmids from oil-contaminated soil by using two cultivation-independent approaches

Two different cultivation-independent approaches were applied to isolate genes for naphthalene dioxygenase (NDO) from oil-contaminated soil in Japan. One approach was the construction of a broad-host-range cosmid-based metagenomic DNA library, and the other was the so-called exogenous plasmid isolation technique. Our screening of NDO genes in both approaches was based on the functional complementation of Pseudomonas putida strains which contained Tn4655K, a transposon carrying the entire set of naphthalene-catabolic (nah) genes but lacking the NDO-encoding gene. We obtained in the former approach a cosmid clone (pSLX928-6) that carried an nah upper pathway operon for conversion of naphthalene to salicylate, and this operon showed a significantly high level of similarity to the corresponding operon on an IncP-9 naphthalene-catabolic plasmid, pDTG1. In the latter approach, the microbial fraction from the soil was mated with a plasmid-free P. putida strain containing a chromosomal copy of Tn4655K, and transconjugants were obtained that received either a 200- or 80-kb plasmid containing all the nah genes for the complete degradation of naphthalene. Subsequent analysis revealed that (1) both plasmids belong to the IncP-9 incompatibility group; (2) their nah upper pathway operons are significantly similar, but not completely identical, to those of pDTG1 and pSLX928-6; and (3) these plasmids carried genes for the salicylate metabolism by the meta-cleavage pathway. A.O. and R.M. contributed equally to this work.     

Structural and Functional Variation in Genetic Systems for Catabolism of Polycyclic Aromatic Hydrocarbons in Pseudomonas putida Strains

The genetic control of naphthalene, phenanthrene, and anthracene biodegradation was studied in three Pseudomonas putida strains isolated from coal tar- and oil-contaminated soils. These strains isolated from different geographical locations contained similar catabolic plasmids controlling the first steps of naphthalene conversion to salicylate (the nah1operon), functionally inoperative salicylate hydroxylase genes, and genes of the metha-pathway of catechol degradation (the nah2 operon). Salicylate oxidation in these strains is determined by genes located in trans-position relative to the nah1 operon: in strains BS202 and BS3701, they are located on the chromosome, and in the strain BS3790, on the second plasmid.     

Functional analysis of genes involved in biphenyl, naphthalene, phenanthrene, and m-xylene degradation by Sphingomonas yanoikuyae B1

Sphingomonas yanoikuyae B1 is able to utilize toluene, m-xylene, p-xylene, biphenyl, naphthalene, phenanthrene, and anthracene as sole sources of carbon and energy for growth. A forty kilobase region of DNA containing most of the genes for the degradation of these aromatic compounds was previously cloned and sequenced. Insertional inactivation of bphC results in the inability of B1 to grow on both polycyclic and monocyclic compounds. Complementation experiments indicate that the metabolic block is actually due to a polar effect on the expression of bphA3, coding for a ferredoxin component of a dioxygenase. Lack of the ferredoxin results in a nonfunctional polycyclic aromatic hydrocarbon dioxygenase and a nonfunctional toluate dioxygenase indicating that the electron transfer components are capable of interacting with multiple oxygenase components. Insertional inactivation of a gene for a dioxygenase oxygenase component downstream of bphA3 had no apparent effect on growth besides a polar effect on nahD which is only needed for growth of B1 on naphthalene. Insertional inactivation of either xylE or xylG in the meta-cleavage operon results in a polar effect on bphB, the last gene in the operon. However, insertional inactivation of xylX at the beginning of this cluster of genes does not result in a polar effect suggesting that the genes for the meta-cleavage pathway, although colinear, are organized in at least two operons. These experiments confirm the biological role of several genes involved in metabolism of aromatic compounds by S. yanoikuyae B1 and demonstrate the interdependency of the metabolic pathways for polycyclic and monocyclic aromatic hydrocarbon degradation. Received 13 May 1999/ Accepted in revised form 05 July 1999     

Efficient degradation of trichloroethylene by a hybrid aromatic ring dioxygenase.

Engineering of hybrid gene clusters between the toluene metabolic tod operon and the biphenyl metabolic bph operon greatly enhanced the rate of biodegradation of trichloroethylene. Escherichia coli cells carrying a hybrid gene cluster composed of todC1 (the gene encoding the large subunit of toluene terminal dioxygenase in Pseudomonas putida F1), bphA2 (the gene encoding the small subunit of biphenyl terminal dioxygenase in Pseudomonas pseudoalcaligenes KF707), bphA3 (the gene encoding ferredoxin in KF707), and bphA4 (the gene encoding ferredoxin reductase in KF707) degraded trichloroethylene much faster than E. coli cells carrying the original toluene dioxygenase genes (todC1C2BA) or the original biphenyl dioxygenase genes (bphA1A2A3A4).     

Functional genes reveal the intrinsic PAH biodegradation potential in creosote-contaminated groundwater following in situ biostimulation

A small-scale functional gene array containing 15 functional gene probes targeting aliphatic and aromatic hydrocarbon biodegradation pathways was used to investigate the effect of a pilot-scale air sparging and nutrient infiltration treatment on hydrocarbon biodegradation in creosote-contaminated groundwater. Genes involved in the different phases of polycyclic aromatic hydrocarbon (PAH) biodegradation were detected with the functional gene array in the contaminant plume, thus indicating the presence of intrinsic biodegradation potential. However, the low aerobic fluorescein diacetate hydrolysis, the polymerase chain reaction (PCR) amplification of 16S rRNA genes closely similar to sulphate-reducing and denitrifying bacteria and the negligible decrease in contaminant concentrations showed that aerobic PAH biodegradation was limited in the anoxic groundwater. Increased abundance of PAH biodegradation genes was detected by functional gene array in the monitoring well located at the rear end of the biostimulated area, which indicated that air sparging and nutrient infiltration enhanced the intrinsic, aerobic PAH biodegradation. Furthermore, ten times higher naphthalene dioxygenase gene copy numbers were detected by real-time PCR in the biostimulated area, which was in good agreement with the functional gene array data. As a result, functional gene array analysis was demonstrated to provide a potential tool for evaluating the efficiency of the bioremediation treatment for enhancing hydrocarbon biodegradation in field-scale applications. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Addition of Aromatic Substrates Restores Trichloroethylene Degradation Activity in Pseudomonas putida F1

The rate of trichloroethylene (TCE) degradation by toluene dioxygenase (TDO) in resting cells of Pseudomonas putida F1 gradually decreased and eventually stopped within 1.5 h, as in previous reports. However, the subsequent addition of toluene, which is the principal substrate of TDO, resulted in its immediate degradation without a lag phase. After the consumption of toluene, degradation of TCE restarted at a rate similar to its initial degradation, suggesting that this degradation was mediated by TDO molecules that were present before the cessation of TCE degradation. The addition of benzene and cumene, which are also substrates of TDO, also caused restoration of TCE degradation activity: TCE was degraded simultaneously with cumene, and a larger amount of TCE was degraded after cumene was added than after toluene or benzene was added. But substrates that were expected to supply the cells with NADH or energy did not restore TCE degradation activity. This cycle of pseudoinactivation and restoration of TCE degradation was observed repeatedly without a significant decrease in the number of viable cells, even after six additions of toluene spread over 30 h. The results obtained in this study demonstrate a new type of restoration of TCE degradation that has not been previously reported.     

Naphtho[1,2-b]thiophene Degradation by Pseudomonas sp. HKT554: Involvement of Naphthalene Dioxygenase

Pseudomonas sp. strain HKT554 degrades naphtho[1,2-b]thiophene and two other isomers, naphtho[2,1-b]thiophene and naphtho[2,3-b]thiophene, by cometabolism, in the absence of any specific inducer, at similar degradation rates. A mutant of strain HKT554, deficient in dibenzothiophene degradation, was generated by using a recently developed transposition system. Sequence analysis of the mutant revealed that the knocked out gene was almost identical to naphthalene dioxygenase (EC 1.14.12.12). The mutant, HKT554M, degraded neither the naphthothiophene isomers nor dibenzothiophene, suggesting that the naphthalene dioxygenase is responsible for the initial catabolic reactions onto naphthothiophenes and dibenzothiophene. Received: 28 January 2002 / Accepted: 28 March 2002     

Broad substrate specificity of naphthalene- and biphenyl-utilizing bacteria

 Although aromatic compounds are most often present in the environment as components of complex mixtures, biodegradation studies commonly focus on the degradation of individual compounds. The present study was performed to investigate the range of aromatic substrates utilized by biphenyl- and naphthalene-degrading environmental isolates and to ascertain the effects of co-occurring substrates during the degradation of mono-aromatic compounds. Bacterial strains were isolated on the basis of their ability to utilize either biphenyl or naphthalene as a sole source of carbon. Growth and transformation assays were conducted on each isolate to determine the range of substrates degraded. One isolate, Pseudomonas putida BP18, was tested for the ability to biodegrade benzene, toluene, ethylbenzene and xylene isomers (BTEX) individually and as components of mixtures. Overall, the results indicate that organisms capable of growth on multi-ring aromatic compounds may be particularly versatile in terms of aromatic hydrocarbon biodegradation. Furthermore, growth and transformation assays performed with strain BP18 suggest that the biodegradation of BTEX and biphenyl by this strain is linked to a catabolic pathway with overlapping specificities. The broad substrate specificity of these environmental isolates has important implications for bioremediation efforts in the field. Received: 4 August 1999 / Received revision: 25 October 1999 / Accepted: 5 November 1999     

Induction of aromatic catabolic activity in Sphingomonas aromaticivorans strain F199

Enzyme induction studies with Sphingomonas aromaticivorans F199 demonstrated that both toluene and naphthalene induced expression of both naphthalene and toluene catabolic enzymes. However, neither aromatic compound induced expression of all the enzymes required for complete mineralization of either naphthalene or toluene. Activity measurements in combination with gene sequence analyses indicate that growth on either aromatic substrate in the absence of the other is, therefore, sub-optimal and is predicted to lead to the build-up of metabolites due to imbalance in toluene or naphthalene catabolic enzyme activities. Growth on toluene may be further inhibited by the co-expression of two toluene catabolic pathways, as predicted from gene sequence analyses. One of these pathways may potentially result in the formation of a dead-end intermediate, possibly benzaldehyde. In contrast, either p-cresol or benzoate can support high levels of growth. Analyses of promoter region sequences on the F199 aromatic catabolic plasmid, pNL1, suggest that additional regulatory events are modulated through the interaction of BphR with Sigma54 type promoters and through the binding of a regulator upstream of p-cresol catabolic genes and xylM. We hypothesize that the unusual gene clustering in strain F199 is optimized for simultaneous degradation of multiple aromatic compound classes, possibly in response to the heterogeneous composition of aromatic structures in the fossil organic matter present in the deep Atlantic Coastal Plain sediments from which this bacterium was isolated. Received 26 April 1999/ Accepted in revised form 16 August 1999