Synthesis of fructose esters by Pseudomonas sp. lipase in anhydrous pyridine

Fructose esters were synthesized from fructose and vinyl esters by transesterification catalyzed by lipase AK in anhydrous pyridine. The efficacy of ester synthesis was enhanced by increasing the length of carbon chain in the vinyl ester. Fructose monoesters and diesters were synthesized and their relative production ratio depended on the chain length of vinyl esters. Vinyl esters with chain length longer than C10 produced only monoacyl fructose which has an acyl moiety attached to C1 carbon of fructose. The monoacyl fructose composed of fatty acid with C10 or longer chains had a strong emulsifying activity on various hydrocarbons and oils.     

Synthesis of ethyl ferulate in organic medium using celite-immobilized lipase

In the present work we have evaluated synthesis of ethyl ferulate by the esterification reaction of ferulic acid and ethanol catalyzed by a commercial lipase (Steapsin) immobilized onto celite-545 in a short period of 6 h in DMSO. The immobilized lipase was treated with cross-linking agent glutaraldehyde (1%; v/v). The optimum synthesis of ethyl ferulate was recorded at 45 °C, pH 8.5 and 1:1 ratio of ethanol and ferulic acid. Co²⁺, Ba²⁺and Pb²⁺ ions enhanced the synthesis of ethyl ferulate Hg²⁺, Cd³⁺and NH⁴⁺ ions had mild inhibitory effect. The celite-bound lipase produced 68 mM of ethyl ferulate under optimized reaction conditions.     

Synthesis of geranyl acetate in non-aqueous media using immobilized Pseudomonas cepacia lipase on biodegradable polymer film: Kinetic modelling and chain length effect study

Pseudomonas cepacia lipase (PCL) was immobilized on ternary blend biodegradable polymer made up of polylactic acid (PLA), chitosan (CH), and polyvinyl alcohol (PVA). Immobilized biocatalyst was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), % water content, protein and lipase activity assay. The lipase activity assay showed enhanced activity of immobilized lipase than crude lipase. Higher half life time (t_1/2) and lower deactivation rate constant (K_d) was found for the n-hexane among various tested solvent. Influence of various reaction parameters on enzyme activity were studied in detail. When geraniol (1 mmol) and vinyl acetate (4 mmol) in toluene (3 mL) were reacted with 50 mg immobilized lipase at 55 °C; then 99% geraniol was converted to geranyl acetate after 3 h. Various kinetic parameters such as r_max, K_i(A), K_m(A), K_m(B) were determined using non-linear regression analysis for ternary-complex and Bi–Bi ping-pong mechanism. The kinetic study showed that reaction followed ternary-complex mechanism with inhibition by geraniol. Activation energy (Ea) was found to be lower for immobilized lipase (13.76 kCal/mol) than crude lipase (19.9 kCal/mol) indicating better catalytic efficiency of immobilized lipase. Immobilized biocatalyst demonstrated 4 fold increased catalytic activity than crude lipase and recycled five times.     

间歇及连续式固定化酶反应生产生物柴油

探讨了利用本实验室自制的Candida sp99．125脂肪酶转酯化合成生物柴油的过程。在利用间歇式反应得到最佳反应条件的情况下利用固定床反应器生产生物柴油,经过初步优化的试验结果表明,在采用分级流加甲醇下,生物柴油的转化率可以达到93％左右,并且固定化酶的使用寿命超过480h。     

A method for lipase co-precipitation in a biodegradable protein matrix

This article presents a novel method for immobilization of active ingredients. The method is based on CO(2) aided active ingredient co-precipitation with glycinin, a biodegradable protein matrix from edible soybean protein. Glycinin precipitates abundantly under isoelectric conditions and serves as the matrix within which the active substance is trapped during the precipitation process. The enzyme lipase from Candida rugosa was successfully co-precipitated into the protein pellet to prove the principle. It was shown that the lipase within the co-precipitate retained lipase and esterase activity under different pH conditions. In some cases the activity was even higher than the activity of crude lipase, possibly due to the protective role of the matrix protein. Due to the retained lipase activity and food-grade quality of the binary precipitate, it has potential of being used in the food or pharmaceutical industry. Additional quality of the binary precipitate is the potentially significantly reduced downstream processing due to the fact that no organic solvents or precipitants were used in the precipitation process.     

Synthesis of ethyl isovalerate using Rhizomucor miehei lipase: optimization

Immobilized lipase from Rhizomucor miehei (Lipozyme IM-20) was used to catalyze the esterification reaction between isovaleric acid and ethanol to synthesize ethyl isovalerate in n-hexane. Response surface methodology based on five-level four-variable central composite rotatable design was employed to optimize four important reaction variables such as enzyme/substrate E/S ratio, substrate concentration, incubation time, and temperature affecting the synthesis of ethyl isovalerate. The optimum conditions predicted for achieving maximum ester yield (500 mM) are as follows: E/S ratio, 48.41 g/mol; substrate concentration, 1 M; reaction time, 60 h; temperature, 60 degrees C. The predicted value matched well with experimentally obtained value of 487 mM.     

Synthesis of esters using a nylon-immobilized lipase in batch and continuous reactors.

Direct esterifications using a nylon-immobilized lipase from Candida cylindracea were carried out in batch and continuous-flow reactors. The immobilized enzyme was effective in catalyzing the synthesis of ethylpropionate, isoamylpropionate, and isoamylbutyrate. With ethanol dissolved in hexane as a substrate, the maximum initial esterification rate was 0.02 mole/(h x g of immobilized protein), but the enzyme was stable only when the substrate concentrations were lower than 0.2 M. With isoamyl alcohol in hexane as a substrate, esterification rates as high as 0.085 mole/(h x g of immobilized protein) were observed and the immobilized enzyme was stable over a much broader concentration range. However, in this case, the use of a solvent, such as hexane, was not necessary for esterification, and the enzyme could be employed in equimolar acid/alcohol mixtures. A packed-bed reactor was operated successfully for the continuous synthesis of esters. The reactor was stable for long periods of time, and the steady-state performance could be accurately predicted on the basis of batch reaction experiments.     

Synthesis of novel d-glucuronic acid fatty esters using Candida antarctica lipase in tert-butanol

Glucuronic acid n-alkyl esters, a novel class of promising biosurfactants and their corresponding glucose esters with the same side-chain length, were synthesized by direct esterification in a non-aqueous phase (tert-butanol) using an immobilized lipase.     

A novel mono- and diacylglycerol lipase highly expressed in Pichia pastoris and its application for food emulsifier preparation

A mono- and diacylglycerol lipase (MDL) was cloned from Penicillium cyclopium and expressed in Pichia pastoris strain GS115. The recombinant enzyme was named Lipase GH1. High cell density fermentation was performed by culture in a 7.5-L fermenter using BSMG medium, in which the phosphate in basal salt medium was replaced by sodium glycerophosphate (Na₂GP). The maximal lipase activity detected was 18,000 U per mL, and total protein content in the fermentation supernatant was 3.94 g per L. The activity of the liquid enzyme remained stable under alkaline conditions at 4 °C for 6 months and was 50% after one year. Lipase GH1 was used for the synthesis of mono- and diacylglycerols (MAGs and DAGs), which are commonly used emulsifiers for industrial applications. A conversion rate of 84% after 24 h of reaction was obtained using glycerol/oleic acid molar ratio 11:1, water content 1.5 wt%, enzyme dosage 80 U per g, and reaction temperature 35 °C. Lipase GH1 was more efficient for the synthesis of MAGs and DAGs than was Lipase G50 (a similar, commercially available lipase derived from Penicillium camemberti) when oleic acid was used as an acyl donor. Lipase GH1 has potential for food emulsifier preparation.     

Synthesis of monoacylglycerol containing pinolenic acid via stepwise esterification using a cold active lipase

High purity monoacylglycerol (MAG) containing pinolenic acid was synthesized via stepwise esterification of glycerol and fatty acids from pine nut oil using a cold active lipase from Penicillium camembertii as a biocatalyst. Effects of temperature, molar ratio, water content, enzyme loading, and vacuum on the synthesis of MAG by lipase‐catalyzed esterification of glycerol and fatty acid from pine nut oil were investigated. Diacylglycerol (DAG) as well as MAG increased significantly when temperature was increased from 20 to 40°C. At a molar ratio of 1:1, MAG content decreased because of the significant increase in DAG content. Water has a profound influence on both MAG and DAG content through the entire course of reaction. The reaction rate increased significantly as enzyme loading increased up to 600 units. Vacuum was an effective method to reduce DAG content. The optimum temperature, molar ratio, water content, enzyme loading, vacuum, and reaction time were 20°C, 1:5 (fatty acid to glycerol), 2%, 600 units, 5 torr, and 24 h, respectively. MAG content further increased via lipase‐catalyzed second step esterification at subzero temperature. P. camembertii lipase exhibited esterification activity up to ?30°C. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Synthesis of n-butyl acetate via reactive distillation column using Candida Antarctica lipase as catalyst

Bioprocess and Biosystems Engineering - The reactive distillation process for the synthesis of n-butyl acetate via transesterification of ethyl acetate with n-butyl alcohol catalyzed by immobilized...     

Synthesis of designer lipids using papaya (Carica papaya) latex lipase

Ethyl esters (EE) of C₂ to C₁₄ saturated acids were interesterified with tripalmitin using papaya (Carica papaya) lipase to produce structured triacylglycerols (TG) with palmitoyl moieties in the secondary (sn-2), and short-chain or medium-chain acyl moieties in the primary (sn-1,3) positions. It was found that the incorporation of the acyl moieties rose with time and chain length of the ethyl ester. Little reaction occurred with ethyl acetate. The positional analysis of the structured TG formed revealed an increase in preference of the lipase for the primary positions as compared to the secondary position with increasing chain length of the acyl donor from C₂ to C₁₄.     

Determination of lipoprotein lipase activity using a novel fluorescent lipase assay

A novel, real-time, homogeneous fluorogenic lipoprotein lipase (LPL) assay was developed using a commercially available substrate, the EnzChek lipase substrate, which is solubilized in Zwittergent. The triglyceride analog substrate does not fluoresce, owing to apposition of fluorescent and fluorescent quenching groups at the sn-1 and sn-2 positions, respectively, fluorescence becoming unquenched upon release of the sn-1 BODIPY FA derivative following hydrolysis. Increase in fluorescence intensity at 37°C was proportional to LPL concentration. The assay was more sensitive than a similar assay using 1,2-O-dilauryl-rac-glycero-3-glutaric acid-(6-methylresorufin ester) and was validated in biological samples, including determination of LPL-specific activity in postheparin mouse plasma. The simplicity and reproducibility of the assay make it ideal for in vitro, high-throughput screening for inhibitors and activators of LPL, thus expediting discovery of drugs of potential clinical value.     

Synthesis and characterization of a photo-cross-linked biodegradable elastomer

The synthesis and characterization of a photocurable biodegradable elastomer as a potential biomaterial for the delivery of thermosensitive drugs are described. The elastomer was prepared from UV initiated cross-linking of an acrylated star-poly(epsilon-caprolactone-co-D,L-lactide) prepolymer. The influence of the molecular weight of the acrylated prepolymer on the final elastomer mechanical and thermal properties was determined. The glass-transition temperature of the elastomers was independent of the prepolymer molecular weight and was from -6 to -8 degrees C. The Young's modulus and stress at break of the elastomers was proportional to the inverse of the prepolymer molecular weight, while the strain at break increased in a linear fashion with the prepolymer molecular weight. Over a degradation period of 12 weeks in phosphate buffered saline, the elastomers exhibited little mass loss, appreciable mechanical strength loss, and little dimensional or strain at break change.     

One-pot synthesis of cathepsin inhibitors: N-protected N-peptidyl-O-acetyl hydroxylamines catalysed by alcalase followed by lipase in anhydrous t-butanol.

N^a-protected N-peptidyl-O-acetyl hydroxylamines [peptides=Ala-Asp(Bzl)-Phe, Pro-Phe-Leu, Ala-Phe, and Pro-Phe] have been synthesized enzymatically in one pot catalyzed by alcalase followed by lipase in t-butanol.     

Ester hydrolyses in reversed micelles using lipase

Lipases are enzymes which require a favourable reaction system for efficient catalysis of their hydrophobic substrates and reversed micellar environment is one such medium which offers many advantages. Hydrolytic studies of esters of paranitrophenol and glycerol using imidazole and four fungal lipases are studied in AOT/isooctane reversed micelles. The effect of water and surfactant concentration on the hydrolysis of rice bran oil is investigated and the overall potential of the reversed micellar system for hydrolytic reactions is assessed.     

应用转基因植物生产生物降解塑料

随着石油化学工业塑料工业的发展 ,塑料用途的不断扩大 ,消费量日益增长 ,塑料废弃物所造成的“白色污染”已成为全球性公害。要从根本上解决这个问题 ,就必须针对塑料不能在环境中自然分解这一本质 ,研制和应用可降解塑料 ,特别是生物降解塑料。利用微生物发酵生产生物降解塑料已有成功的实践[1] 。但这种塑料的价格远高于现使用的不可降解塑料 ,实际应用受到限制。近年来 ,随着重组ＤＮＡ技术的迅猛发展 ,研究开发转基因植物生产生物降解塑料勃然兴起 ,并已取得了可喜的进展[2 ,3 ] 。本文就生物降解塑料种类及细菌合成途径和转基因培育生…