Conjugal transfer between Bacillus thuringiensis and Bacillus cereus strains is not directly correlated with growth of recipient strains

Bacillus thuringiensis and Bacillus cereus belong to the B. cereus species group. The two species share substantial chromosomal similarity and differ mostly in their plasmid content. The phylogenetic relationship between these species remains a matter of debate. There is genetic exchange both within and between these species, and current evidence indicates that insects are a particularly suitable environment for the growth of and genetic exchange between these species. We investigated the conjugation efficiency of B. thuringiensis var. kurstaki KT0 (pHT73-Em^R) as a donor and a B. thuringiensis and several B. cereus strains as recipients; we used one-recipient and two-recipient conjugal transfer systems in vitro (broth and filter) and in Bombyx mori larvae, and assessed multiplication following conjugation between Bacillus strains. The B. thuringiensis KT0 strain did not show preference for genetic exchange with the B. thuringiensis recipient strain over that with the B. cereus recipient strains. However, B. thuringiensis strains germinated and multiplied more efficiently than B. cereus strains in insect larvae and only B. thuringiensis maintained complete spore germination for at least 24 h in B. mori larvae. These findings show that there is no positive association between bacterial multiplication efficiency and conjugation ability in infected insects for the used strains.     

In situ detection of antibiotic-resistance elements in single Bacillus cereus spores

Rapid detection of Bacillus spores is a challenging task in food and defense industries. In situ labeling of spores would be advantageous for detection by automated systems based on single-cell analysis. Determination of antibiotic-resistance genes in bacterial spores using in situ labeling has never been developed. Most of the in situ detection schemes employ techniques such as fluorescence in situ hybridization (FISH) that target the naturally amplified ribosomal RNA (rRNA). However, the majority of antibiotic-resistance genes has a plasmidic or chromosomal origin and is present in low copy numbers in the cell. The main challenge in the development of low-target in situ detection in spores is the permeabilization procedure and the signal amplification required for detection. This study presents permeabilization and in situ signal amplification protocols, using Bacillus cereus spores as a model, in order to detect antibiotic-resistance genes. The permeabilization protocol was designed based on the different layers of the Bacillus spore. Catalyzed reporter deposition (CARD)–FISH and in situ polymerase chain reaction (PCR) were used as signal amplification techniques. B. cereus was transformed with the high copy number pC194 and low copy number pMTL500Eres plasmids in order to induce resistance to chloramphenicol and erythromycin, respectively. In addition, a rifampicin-resistant B. cereus strain, conferred by a single-nucleotide polymorphism (SNP) in the chromosome, was used. Using CARD–FISH, only the high copy number plasmid pC194 was detected. On the other hand, in situ PCR gave positive results in all tested instances. This study demonstrated that it was feasible to detect antibiotic-resistance genes in Bacillus spores using in situ techniques. In addition, in situ PCR has been shown to be more sensitive and more applicable than CARD–FISH in detecting low copy targets.     

Microbiological induced corrosion of AA 6061 nuclear alloy in highly diluted media by Bacillus cereus RE 10

Microbiological studies of a spent nuclear fuel pool in Argentina were performed to evaluate the risk of microbiological induced corrosion and determine the cultivable bacterial population. Based on standard methods and sequencing of the 16sRNA gene, eighteen microorganisms were identified. Bacillus cereus RE 10 was the predominant organism isolated, and was selected to investigate the biofilm formation process and the corrosion effect on aluminum alloy AA 6061 and on pure aluminum (Al 99.999%). To simulate the environmental conditions, the experiments were performed using a highly diluted medium. After 20 days of exposure, major pits covered with deposits were found on AA 6061 samples exposed to B. cereus RE 10 but not on Al 99.999%. There was a close correlation between biofilm patches, corrosion deposits, pitting and Al-(Fe or Ti)-Si inclusions. We postulate that this correlation is a consequence of a light local alkalinization around the inclusions that produces changes in the expression pattern of B. cereus RE 10 and allows bacterial survival using other substrates. Under these conditions, the generated biofilm induces a crevice corrosion effect around the intermetallic inclusions of the alloy. Our results will be useful for further studies related to the microbial impact on nuclear safety in nuclear waste storage facilities in Argentina.     

Characterization of the adenine nucleoside specific phosphorylase of Bacillus cereus

Adenosine phosphorylase, a purine nucleoside phosphorylase endowed with high specificity for adenine nucleosides, was purified 117-fold from vegetative forms of Bacillus cereus. The purification procedure included ammonium sulphate fractionation, pH 4 treatment, ion exchange chromatography on DEAE-Sephacel, gel filtration on Sephacryl S-300 HR and affinity chromatography on N⁶-adenosyl agarose. The enzyme shows a good stability to both temperature and pH. It appears to be a homohexamer of 164 ± 5 kDa. Kinetic characterization confirmed the specificity of this phosphorylase for 6-aminopurine nucleosides. Adenosine was the preferred substrate for nucleoside phosphorolysis (k_cat/K_m 2.1 × 10⁶ s^− 1 M^− 1), followed by 2′-deoxyadenosine (k_cat/K_m 4.2 × 10⁵ s^− 1 M^− 1). Apparently, the low specificity of adenosine phosphorylase towards 6-oxopurine nucleosides is due to a slow catalytic rate rather than to poor substrate binding.     

Processive interfacial catalytic turnover by Bacillus cereus sphingomyelinase on sphingomyelin vesicles

Sphingomyelinase (SMase), a water-soluble enzyme from Bacillus cereus, is shown to bind with high affinity to vesicles of sphingomyelin (SM) but not to vesicles of phosphatidylcholine (PC). The reaction progress by SMase bound to SM vesicles occurs in the scooting mode with virtually infinite processivity of the successive interfacial turnover cycles. Three conditions for the microscopic steady state during the reaction progress at the interface are satisfied: the bound SMase does not leave the interface even after all the SM in the outer layer is converted to ceramide; the SMase-treated vesicles remain intact; and the ceramide product does not exchange with SM present in excess vesicles or in the inner layer of the hydrolyzed vesicle. Within these constraints, on accessibility and replenishment of the substrate, the extent of hydrolysis in the scooting mode reaction progress is a measure of the number of vesicles containing enzyme. The slope of the Poisson distribution plot, for the enzyme per vesicle versus the logarithm of the fraction of the total accessible substrate remaining unhydrolyzed in excess vesicles, shows that a single 32 kDa subunit of SMase is fully catalytically active. The maximum initial rate of hydrolysis, at the limit of the maximum possible substrate mol fraction, X_S*=1, is 400 s^?1 in H₂O and 220 s^?1 in D₂O, which is consistent with the rate-limiting chemical step. The integrated reaction progress suggests that the ceramide product does not codisperse ideally on the hydrolyzed vesicles. Furthermore, complex reaction progress seen with covesicles of SM+PC are attributed to slow secondary changes in the partially hydrolyzed SM vesicles.     

The properties of Bacillus cereus hemolysin II pores depend on environmental conditions

Hemolysin II (HlyII), one of several cytolytic proteins encoded by the opportunistic human pathogen Bacillus cereus, is a member of the family of oligomeric β-barrel pore-forming toxins. This work has studied the pore-forming properties of HlyII using a number of biochemical and biophysical approaches. According to electron microscopy, HlyII protein interacts with liposomes to form ordered heptamer-like macromolecular assemblies with an inner pore diameter of 1.5-2 nm and an outer diameter of 6-8 nm. This is consistent with inner pore diameter obtained from osmotic protection assay. According to the 3D model obtained, seven HlyII monomers might form a pore, the outer size of which has been estimated to be slightly larger than by the other method, with an inner diameter changing from 1 to 4 nm along the channel length. The hemolysis rate has been found to be temperature-dependent, with an explicit lag at lower temperatures. Temperature jump experiments have indicated the pore structures formed at 37 °C and 4 °C to be different. The channels formed by HlyII are anion-selective in lipid bilayers and show a rising conductance as the salt concentration increases. The results presented show for the first time that at high salt concentration HlyII pores demonstrate voltage-induced gating observed at low negative potentials. Taken together we have found that the membrane-binding properties of hemolysin II as well as the properties of its pores strongly depend on environmental conditions. The study of the properties together with structural modeling allows a better understanding of channel functioning.     

Quantification methods for Bacillus cereus vegetative cells and spores in the gastrointestinal environment

There is an interest to understand the fate and behaviour of the food-borne pathogen Bacillus cereus in the gut, a challenging environment with a high bacterial background. We evaluated the current detection methods to select an appropriate strategy for B. cereus monitoring during gastrointestinal experiments. Application of quantitative real-time PCR (qPCR) in a gastrointestinal matrix required careful selection of the qPCR reaction and elaborate optimization of the DNA extraction protocol. Primer competition and depletion problems associated with qPCR reactions targeting general 16S rRNA gene can be avoided by the selection of a target sequence that is unique for and widespread among the target bacteria, such as the toxin gene nheB in the case of pathogenic B. cereus. Enumeration of B. cereus during the ileum phase was impossible by plating due to overgrowth by intestinal bacteria, while a carefully optimized qPCR enabled specific detection and quantification of B. cereus. On the other hand, plating allowed the distinction of viable, injured and dead bacteria and the germination of spores, which was not possible with qPCR. In conclusion, both plating and qPCR were necessary to yield the maximal information regarding the viability and physiology of the B. cereus population in various gastrointestinal compartments.     

Distribution of phenotypes among Bacillus thuringiensis strains

An extensive collection of Bacillus thuringiensis isolates from around the world were phenotypically profiled using standard biochemical tests. Six phenotypic traits occurred in 20–86% of the isolates and were useful in distinguishing isolates: production of urease (U; 20.5% of isolates), hydrolysis of esculin (E; 32.3% of isolates), acid production from salicin (A; 37.4% of isolates), acid production from sucrose (S; 34.0% of isolates), production of phospholipase C or lecithinase (L; 79.7% of isolates), and hydrolysis of starch (T; 85.8% of isolates). With the exception of acid production from salicin and hydrolysis of esculin, which were associated, the traits assorted independently. Of the 64 possible combinations of these six phenotypic characteristics, 15 combinations accounted for ca. 80% of all isolates, with the most common phenotype being TL (23.6% of isolates). Surprisingly, while the biochemical traits generally assorted independently, certain phenotypic traits associated with the parasporal crystal were correlated with certain combinations of biochemical traits. Crystals that remained attached to spores (which tended to be non-toxic to insects) were highly correlated with the phenotypes that included both L and S. Among the 15 most abundant phenotypes characterizing B. thuringiensis strains, amorphous crystals were associated with TLE, TL, T, and Ø (the absence of positive tested biochemical traits). Amorphous crystal types displayed a distinct bias toward toxicity to dipteran insects. Although all common phenotypes included B. thuringiensis isolates producing bipyramidal crystals toxic to lepidopteran insects, those with the highest abundance of these toxic crystals displayed phenotypes TLU, TLUA, TLUAE, and TLAE.     

Description of Bacillus toyonensis sp. nov., a novel species of the Bacillus cereus group,and pairwise genome comparisons of the species of the group by means of ANI calculations

Strain BCT-7112^T was isolated in 1966 in Japan from a survey designed to obtain naturally occurring microorganisms as pure cultures in the laboratory for use as probiotics in animal nutrition. This strain, which was primarily identified as Bacillus cereus var toyoi, has been in use for more than 30 years as the active ingredient of the preparation TOYOCERIN^®, an additive for use in animal nutrition (e.g. swine, poultry, cattle, rabbits and aquaculture). Despite the fact that the strain was initially classified as B. cereus, it showed significant genomic differences from the type strains of the B. cereus group that were large enough (ANI values below 92%) to allow it to be considered as a different species within the group. The polyphasic taxonomic study presented here provides sufficient discriminative parameters to classify BCT-7112^T as a new species for which the name Bacillus toyonensis sp. nov. is proposed, with BCT-7112^T (=CECT 876^T; =NCIMB 14858^T) being designated as the type strain. In addition, a pairwise comparison between the available genomes of the whole B. cereus group by means of average nucleotide identity (ANI) calculations indicated that besides the eight classified species (including B. toyonensis), additional genomospecies could be detected, and most of them also had ANI values below 94%. ANI values were on the borderline of a species definition only in the cases of representatives of B. cereus versus B. thuringiensis, and B. mycoides and B. weihenstephanensis.     

Involvement of SpoVG in hemolysis caused by Bacillus subtilis

Bacillus subtilis is a facultative anaerobic Gram-positive non-pathogenic bacterium that includes members displaying hemolytic activity. To identify the genes responsible for hemolysis, a random mariner-based transposon insertion mutant library of B. subtilis 168 was constructed. More than 20,000 colonies were screened for the hypohemolytic phenotype on blood agar plates. One mutant showed significantly less pronounced hemolytic phenotype than the wild type. DNA sequencing and Southern blot analysis showed this mutant has a single transposable element inserted into the open reading frame (ORF) of the spoVG gene; complementation of the spoVG-disrupted mutant with a wild-type copy restored its hemolytic phenotype. It was therefore concluded that the spoVG gene, which plays a role in regulating asymmetric septation during sporulation in B. subtilis, is involved in hemolysis by B. subtilis.     

End-products diacylglycerol and ceramide modulate membrane fusion induced by a phospholipase C/sphingomyelinase from Pseudomonas aeruginosa

A phospholipase C/sphingomyelinase from Pseudomonas aeruginosa has been assayed on vesicles containing phosphatidylcholine, sphingomyelin, phosphatidylethanolamine and cholesterol at equimolar ratios. The enzyme activity modifies the bilayer chemical composition giving rise to diacylglycerol (DAG) and ceramide (Cer). Assays of enzyme activity, enzyme-induced aggregation and fusion have been performed. Ultrastructural evidence of vesicle fusion at various stages of the process is presented, based on cryo-EM observations. The two enzyme lipidic end-products, DAG and Cer, have opposite effects on the bilayer physical properties; the former abolishes lateral phase separation, while the latter generates a new gel phase [Sot et al., FEBS Lett. 582, 3230-3236 (2008)]. Addition of either DAG, or Cer, or both to the liposome mixture causes an increase in enzyme binding to the bilayers and a decrease in lag time of hydrolysis. These two lipids also have different effects on the enzyme activity, DAG enhancing enzyme-induced vesicle aggregation and fusion, Cer inhibiting the hydrolytic activity. These effects are explained in terms of the different physical properties of the two lipids. DAG increases bilayers fluidity and decreases lateral separation of lipids, thus increasing enzyme activity and substrate accessibility to the enzyme. Cer has the opposite effect mainly because of its tendency to sequester sphingomyelin, an enzyme substrate, into rigid domains, presumably less accessible to the enzyme.     

Screen of Bacillus thuringiensis toxins for transgenic rice to control Sesamia inferens and Chilo suppressalis

Transgenic rice to control stem borer damage is under development in China. To assess the potential of Bacillus thuringiensis (Bt) transgenes in stem borer control, the toxicity of five Bt protoxins (Cry1Aa, Cry1Ab, Cry1Ac, Cry1Ba and Cry1Ca) against two rice stem borers, Sesamia inferens (pink stem borer) and Chilo suppressalis (striped stem borer), was evaluated in the laboratory by feeding neonate larvae on artificial diets containing Bt protoxins. The results indicated that Cry1Ca exhibited the highest level of toxicity to both stem borers, with an LC₅₀ of 0.24 and 0.30 μg/g for C. suppressalis and S. inferens, respectively. However, S. inferens was 4-fold lower in susceptibility to Cry1Aa, and 6- and 47-fold less susceptible to Cry1Ab and Cry1Ba, respectively, compared to C. suppressalis. To evaluate interactions among Bt protoxins in stem borer larvae, toxicity assays were performed with mixtures of Cry1Aa/Cry1Ab, Cry1Aa/Cry1Ca, Cry1Ac/Cry1Ca, Cry1Ac/Cry1Ba, Cry1Ab/Cry1Ac, Cry1Ab/Cry1Ba, and Cry1Ab/Cry1Ca at 1:1 (w/w) ratios. All protoxin mixtures demonstrated significant synergistic toxicity activity against C. suppressalis, with values of 1.6- to 11-fold higher toxicity than the theoretical additive effect. Surprisingly, all but one of the Bt protoxin mixtures were antagonistic in toxicity to S. inferens. In mortality-time response experiments, S. inferens demonstrated increased tolerance to Cry1Ab and Cry1Ac compared to C. suppressalis when treated with low or high protoxin concentrations. The data indicate the utility of Cry1Ca protoxin and a Cry1Ac/Cry1Ca mixture to control both stem borer populations.     

Insecticidal activity of Bacillus thuringiensis crystal proteins

Published data on insecticidal activity of crystal proteins from Bacillus thuringiensis are incorporated into the Bt toxin specificity relational database. To date, 125 of the 174 holotype known toxins have been tested in ∼1700 bioassays against 163 test species; 49 toxins have not been tested at all; 59 were tested against 71 Lepidoptera species in 1182 bioassays; 53 toxins were tested against 23 Diptera species in 233 bioassays; and 47 were tested against 39 Coleoptera species in 190 bioassays. Activity spectra of the tested toxins were summarized for each order. Comparisons of LC₅₀ values are confounded by high variability of the estimates, mostly due to within-species variation in susceptibility, and errors associated with estimation of toxin protein content. Limited analyses suggest that crystal protein toxicity is not affected by quarternary toxin rank or host used for gene expression, but that pre-ingestion treatment by solubilization or enzymatic processing has a large effect. There is an increasing number of toxin families with cross-order activity, as 15 of the 87 families (secondary rank) that are pesticidal are active against more than one order. Cross-order activity does not threaten environmental safety of B. thuringiensis-based pest control because toxins tend to be much less toxic to taxa outside the family’s primary specificity range.     

Peptides panned from a phage-displayed random peptide library are useful for the detection of Bacillus anthracis surrogates B. cereus 4342 and B. anthracis Sterne

Recent use of Bacillus anthracis as a bioweapon has highlighted the need for a sensitive monitoring system. Current bacterial detection tests use antibodies as bio-molecular recognition elements which have limitations with regard to time, specificity and sensitivity, creating the need for new and improved cost-effective high-affinity detection probes. In this study, we screened a commercially available bacteriophage-displayed random peptide library using Bacillus cereus 4342 cells as bait to identify peptides that could be used for detection of Bacillus. The method enabled us to identify two 12-amino acid consensus peptide sequences that specifically bind to B. cereus 4342 and B. anthracis Sterne, the nonpathogenic surrogates of B. anthracis strain. The two Bacillus-binding peptides (named BBP-1 and BBP-2) were synthesized with biotin tag to confirm their binding by four independent detection assays. Dot-blot analysis revealed that the peptides bind specifically to B. cereus 4342 and B. anthracis Sterne. Quantitative analysis of this interaction by ELISA and fluorometry demonstrated a detection sensitivity of 10² colony forming U/ml (CFU/ml) by both assays. When the peptides were used in combination with Qdots, the sensitivity was enhanced further by enabling detection of even a single bacterium by fluorescence microscopy. Immunoblot analysis and protein sequencing showed that BBP-1 and BBP-2 bound to the S-layer protein of B. anthracis Sterne. Overall, our findings validate the usefulness of synthetic versions of phage-derived peptides in combination with Qdot-liquid nanocrystals as high sensitivity bioprobes for various microbial detection platforms.     

Biological synthesis of gold nanocubes from Bacillus licheniformis

Microorganisms play an important role in the eco-friendly synthesis of metal nanoparticles. This study illustrates the synthesis of gold nanocubes using the bacterium Bacillus licheniformis after 48 h of incubation at room temperature. The morphology of the samples was analyzed using scanning electron microscopy (SEM) and the particles formed were characterized to be nanocubes. The size of gold nanocubes in aqueous solution has been calculated using UV–Vis spectroscopy, XRD and SEM measurements. The nanoparticles are found to be polydisperse nanocubes in the size range 10–100 nm.     

Single nucleotide deletion of cqm1 gene results in the development of resistance to Bacillus sphaericus in Culex quinquefasciatus

The entomopathogen Bacillus sphaericus is one of the most effective biolarvicides used to control the Culex species of mosquito. The appearance of resistance in mosquitoes to this bacterium, however, remains a threat to its continuous use in integrated mosquito control programs. Previous work showed that the resistance to B. sphaericus in Culex colonies was associated with the absence of the 60-kDa binary toxin receptor (Cpm1/Cqm1), an alpha-glucosidase present in the larval midgut microvilli. In this work, we studied the molecular basis of the resistance developed by Culex quinquefasciatus to B. sphaericus C3-41. The cqm1 genes were cloned from susceptible (CqSL) and resistant (CqRL/C3-41) colonies, respectively. The sequence of the cDNA and genomic DNA derived from CqRL/C3-41 colony differed from that of CqSL one by a one-nucleotide deletion which resulted in a premature stop codon, leading to production of a truncated protein. Recombinant Cqm1S from the CqSL colony expressed in Escherichia coli specifically bound to the Bin toxin and had α-glucosidase activity, whereas the Cqm1R from the CqRL/C3-41 colony, with a deletion of three quarters of the receptor’s C-terminal lost its α-glucosidase activity and could not bind to the binary toxin. Immunoblotting experiments showed that Cqm1 was undetectable in CqRL/C3-41 larvae, although the gene was correctly transcribed. Thus, the cqm1R represents a new allele in C. quinquefasciatus that confers resistance to B. sphaericus.     

Rapid sporulation of Bacillus anthracis in a high iron, glucose-free medium

Spores are the infectious form of Bacillus anthracis (BA), causing cutaneous, inhalation and gastrointestinal anthrax. Because of the possible use of BA spores in a bioterrorism attack, there is considerable interest in studying spore biology. In the laboratory, however, it takes a number of days to prepare spores. Standard sporulation protocols, such as the use of ‘PA broth’, allow sporulation of BA to occur in 3 to 5 days. Another method employs growth of BA on plates in the dark for several days until they have efficiently sporulated. In efforts to determine the effect of iron on gene expression in BA, we grew BA Sterne strain 7702 in a minimal defined medium (CDM; Koppisch et al., 2005) with various concentrations of iron and glucose. As part of our initial observations, we monitored BA sporulation in CDM via light microscopy. In glucose-free CDM containing 1.5 mM Fe(NO₃)₃ (CDM-Fe), > 95% of the BA sporulated by 30 h; a far shorter time period than expected. We pursued this observation and we further characterized spores derived from PA and CDM-Fe media. Purified spores derived from PA or CDM-Fe had similar morphologies when viewed by light or electron microscopy, and were equally resistant to harsh conditions including heat (65 °C), ice and fresh 30% H₂O₂. Spore viability in long term cold storage in water was similar for the two spore preparations. Extracted spore coat proteins were evaluated by SDS-PAGE and silver staining, which revealed distinct protein profiles for PA and CDM-Fe spore coat extracts. ELISA assays were done to compare the interaction of the two spore preparations with rabbit antiserum raised against UV-killed Sterne strain 7702 spores prepared in PA medium. Spores from both media reacted identically with this antiserum. Finally, the interaction and fate of spores incubated with macrophages in vitro was very similar. In summary, BA spores induced in CDM-Fe or in PA medium are similar by several criteria, but show distinct extractable coat proteins. CDM-Fe liquid medium can be used for rapid production of BA spores, and could save considerable time in spore research studies.     

Characterization of resistance to Bacillus thuringiensis toxin Cry1Ac in Plutella xylostella from China

A field population (SZ) of Plutella xylostella, collected from the cabbage field in Shenzhen, Guangdong Province of China in 2002, showed 2.3-fold resistance to Cry1Aa, 110-fold to Cry1Ab, 30-fold to Cry1Ac, 2.1-fold to Cry1F, 5.3-fold to Cry2Aa and 6-fold resistance to Bacillus thuringiensis var. kurstaki (Btk) compared with a susceptible strain (ROTH). The SZBT strain was derived from the SZ population through 20 generations of selection with activated Cry1Ac in the laboratory. While the SZBT strain developed 1200-fold resistance to Cry1Ac after selection, resistance to Cry1Aa, Cry1Ab, Cry1F, and Btk increased to 31-, 1900-,>33- and 17-fold compared with the ROTH strain. However, little or no cross-resistance was detected to Cry1B, Cry1C and Cry2Aa in the SZBT strain. Genetic cross analyses between the SZBT and ROTH strains revealed that Cry1Ac-resistance in the SZBT strain was controlled by a single, autosomal, incompletely recessive gene. Binding studies with ¹²⁵I-labeled Cry1Ac showed that the brush border membrane vesicles (BBMVs) of midguts from the resistant SZBT insects had lost binding to Cry1Ac. Allelic complementation tests demonstrated that the major Bt resistance locus in the SZBT strain was same as that in the Cry1Ac-R strain which has “mode 1” resistance to Bt. An F₁ screen of 120 single-pair families between the SZBT strain and three field populations collected in 2008 was carried out. Based on this approach, the estimated frequencies of Cry1Ac-resistance alleles were 0.156 in the Yuxi population from Yunnan province, and 0.375 and 0.472 respectively in the Guangzhou and Huizhou populations from Guangdong province.     

MoxT toxin of Bacillus anthracis exhibits sequence specific ribonuclease activity

MoxXT module of Bacillus anthracis encodes MoxX, a labile protein and MoxT, a ribonuclease. However, mechanism of cleavage of RNA by MoxT has not been explored till date. In the present study, we have demonstrated that MoxT is a sequence specific ribonuclease which recognizes UACAU sequence in ss RNA and cleaves between U and A. Moreover, cleavage of RNA requires 2′ OH group of first residue, i.e. U of UACAU RNA sequence. An interesting finding which makes it distinct from the other MazF family toxins was also observed, i.e. its ability to cleave RNA in DNA–RNA hybrid.     

Effect of biosurfactant and fertilizer on biodegradation of crude oil by marine isolates of Bacillus megaterium, Corynebacterium kutscheri and Pseudomonas aeruginosa

This study was conducted to investigate the effects of fertilizers and biosurfactants on biodegradation of crude oil by three marine bacterial isolates; Bacillus megaterium, Corynebacterium kutscheri and Pseudomonas aeruginosa. Five sets of experiments were carried out in shake flask and microcosm conditions with crude oil as follows: Set 1-only bacterial cells added (no fertilizer and biosurfactant), Set 2-with additional fertilizer only, Set 3-with additional biosurfactant only, Set 4-with added biosurfactant + fertilizer, Set 5-with no bacterial cells added (control), all the above experimental sets were incubated for 168 h. The biosurfactant + fertilizer added Set 4, resulted in maximum crude oil degradation within shake flask and microcosm conditions. Among the three bacterial isolates, P. aeruginosa and biosurfactant produced by this strain resulted in maximum crude oil degradation compared to the other two bacterial strains investigated. Interestingly, when biosurfactant and bacterial cells were used (Set 3), significant oil biodegradation activity occurred and the difference between this treatment and that in Set 4 with added fertilizer + biosurfactant were only 4-5% higher degradation level in shake flask and 3.2-7% in microcosm experiments for all three bacterial strains used. It is concluded that, biosurfactants alone capable of promoting biodegradation to a large extent without added fertilizers, which will reduce the cost of bioremediation process and minimizes the dilution or wash away problems encountered when water soluble fertilizers used during bioremediation of aquatic environments.