Prevention of mechanical stretch-induced endothelial and smooth muscle cell injury in experimental vein grafts

Vein grafts are subject to increased tensile stress due to exposure to arterial blood pressure, which has been hypothesized to induce endothelial cell (EC) and smooth muscle cell (SMC) injury. This study was designed to verify this hypothesis and to develop a tissue engineering approach that can be used to prevent these pathological events. Two experimental models were created in rats to achieve these goals: (1) a nonengineered vein graft with increased tensile stress, which was created by grafting a jugular vein into the abdominal aorta using a conventional end-to-end anastomotic technique; and (2) an engineered vein graft with reduced tensile stress, which was created by restricting a vein graft into a cylindrical sheath constructed using a polytetrafluoroethylene membrane. The integrity of ECs in these models was examined by using a silver nitrate staining method, and the integrity of SMCs was assessed by using a fluorescein phalloidin-labeling technique. It was found that nonengineered vein grafts were associated with early EC denudation with a change in EC coverage from 100 percent in normal jugular veins to 36 +/- 10, 28 +/- 12, 18 +/- 9, 44 +/- 15, 80 +/- 13, and 97 +/- 6 percent at 1 and 6 hours and 1, 5, 10, and 30 days, respectively. Similarly, rapid SMC actin filament degradation was found during the early period with a change in SMC coverage from approximately 94 percent in normal jugular veins to 80 +/- 10, 41 +/- 17, 25 +/- 9, 51 +/- 15, 79 +/- 15, 98 +/- 2 percent at 1 and 6 hours and 1, 5, 10, and 30 days, respectively, in nonengineered vein grafts. In engineered vein grafts with reduced tensile stress, EC denudation and SMC actin filament degradation were prevented significantly. These results suggested that mechanical stretch due to increased tensile stress contributed to EC and SMC injury in experimental vein grafts, and these pathological events could be partially prevented when tensile stress was reduced by using a biomechanical engineering approach.     

Role of tensile stress and strain in the induction of cell death in experimental vein grafts

Tensile stress and strain are known to induce vascular cell proliferation, a process that is physiologically counterbalanced by cell death. Here we investigate whether tensile stress and strain regulate vascular-cell death by using an end-to-end anastomosed rat vein graft model. In such a model, the circumferential tensile stress in the graft wall was increased by approximately 140 times immediately after surgery compared with that in the venous wall. This change was associated with an increase in the percentage of TUNEL-positive cells at 1, 6, 24, 120, 240, and 720h with two distinct peaks at 1 and 24h (10.1+/-3.5 and 14.4+/-3.2%, respectively) compared with that in control jugular veins (0.4+/-0.5 and 0.5+/-0.5% at 1 and 24h, respectively). When tensile stress and strain in the vein graft wall were reduced by using a biomechanical engineering approach, the rate of cell death was reduced significantly (3.6+/-1.1 and 1.6+/-0.5% at 1 and 24h, respectively). Furthermore, DEVD-CHO, a tetrapeptide aldehyde that inhibits the activity of caspase 3, significantly suppressed this event. These results suggest that a step increase in tensile stress and strain in experimental vein grafts induces rapid cell death, which is possibly mediated by cell death signaling mechanisms.     

Computational model of blood flow in the aorto-coronary bypass graft

Background

Coronary artery bypass grafting surgery is an effective treatment modality for patients with severe coronary artery disease. The conduits used during the surgery include both the arterial and venous conduits. Long- term graft patency rate for the internal mammary arterial graft is superior, but the same is not true for the saphenous vein grafts. At 10 years, more than 50% of the vein grafts would have occluded and many of them are diseased. Why do the saphenous vein grafts fail the test of time? Many causes have been proposed for saphenous graft failure. Some are non-modifiable and the rest are modifiable. Non-modifiable causes include different histological structure of the vein compared to artery, size disparity between coronary artery and saphenous vein. However, researches are more interested in the modifiable causes, such as graft flow dynamics and wall shear stress distribution at the anastomotic sites. Formation of intimal hyperplasia at the anastomotic junction has been implicated as the root cause of long- term graft failure.Many researchers have analyzed the complex flow patterns in the distal sapheno-coronary anastomotic region, using various simulated model in an attempt to explain the site of preferential intimal hyperplasia based on the flow disturbances and differential wall stress distribution. In this paper, the geometrical bypass models (aorto-left coronary bypass graft model and aorto-right coronary bypass graft model) are based on real-life situations. In our models, the dimensions of the aorta, saphenous vein and the coronary artery simulate the actual dimensions at surgery. Both the proximal and distal anastomoses are considered at the same time, and we also take into the consideration the cross-sectional shape change of the venous conduit from circular to elliptical. Contrary to previous works, we have carried out computational fluid dynamics (CFD) study in the entire aorta-graft-perfused artery domain. The results reported here focus on (i) the complex flow patterns both at the proximal and distal anastomotic sites, and (ii) the wall shear stress distribution, which is an important factor that contributes to graft patency.

Methods

The three-dimensional coronary bypass models of the aorto-right coronary bypass and the aorto-left coronary bypass systems are constructed using computational fluid-dynamics software (Fluent 6.0.1). To have a better understanding of the flow dynamics at specific time instants of the cardiac cycle, quasi-steady flow simulations are performed, using a finite-volume approach. The data input to the models are the physiological measurements of flow-rates at (i) the aortic entrance, (ii) the ascending aorta, (iii) the left coronary artery, and (iv) the right coronary artery.

Results

The flow field and the wall shear stress are calculated throughout the cycle, but reported in this paper at two different instants of the cardiac cycle, one at the onset of ejection and the other during mid-diastole for both the right and left aorto-coronary bypass graft models. Plots of velocity-vector and the wall shear stress distributions are displayed in the aorto-graft-coronary arterial flow-field domain. We have shown (i) how the blocked coronary artery is being perfused in systole and diastole, (ii) the flow patterns at the two anastomotic junctions, proximal and distal anastomotic sites, and (iii) the shear stress distributions and their associations with arterial disease.

Conclusion

The computed results have revealed that (i) maximum perfusion of the occluded artery occurs during mid-diastole, and (ii) the maximum wall shear-stress variation is observed around the distal anastomotic region. These results can enable the clinicians to have a better understanding of vein graft disease, and hopefully we can offer a solution to alleviate or delay the occurrence of vein graft disease.

     

A simple fluid-structure coupling algorithm for the study of the anastomotic mechanics of vascular grafts

Vascular anastomoses constitute a main factor in poor graft performance due to mismatches in distensibility between the host artery and the graft. This work aims at computational fluid-structure investigations of proximal and distal anastomoses of vein grafts and synthetic grafts. Finite element and finite volume models were developed and coupled with a user-defined algorithm. Emphasis was placed on the simplicity of the coupling algorithm. An artery and vein graft showed a larger dilation mismatch than an artery and synthetic graft. The vein graft distended nearly twice as much as the artery while the synthetic graft displayed only approximately half the arterial dilation. For the vein graft, luminal mismatching was aggravated by development of an anastomotic pseudo-stenosis. While this study focused on end-to-end anastomoses as a vehicle for developing the coupling algorithm, it may serve as useful point of departure for further investigations such as other anastomotic configurations, refined modelling of sutures and fully transient behaviour.     

A simple fluid–structure coupling algorithm for the study of the anastomotic mechanics of vascular grafts

Vascular anastomoses constitute a main factor in poor graft performance due to mismatches in distensibility between the host artery and the graft. This work aims at computational fluid–structure investigations of proximal and distal anastomoses of vein grafts and synthetic grafts. Finite element and finite volume models were developed and coupled with a user-defined algorithm. Emphasis was placed on the simplicity of the coupling algorithm. An artery and vein graft showed a larger dilation mismatch than an artery and synthetic graft. The vein graft distended nearly twice as much as the artery while the synthetic graft displayed only approximately half the arterial dilation. For the vein graft, luminal mismatching was aggravated by development of an anastomotic pseudo-stenosis. While this study focused on end-to-end anastomoses as a vehicle for developing the coupling algorithm, it may serve as useful point of departure for further investigations such as other anastomotic configurations, refined modelling of sutures and fully transient behaviour.     

Influence of tensile strain on smooth muscle cell orientation in rat blood vessels.

Blood vessels are subject to tensile stress and associated strain which may influence the structure and organization of smooth muscle cells (SMCs) during physiological development and pathological remodeling. This study focused on the influence of the major tensile strain on the SMC orientation in the blood vessel wall. Several blood vessels, including the aorta, the mesenteric artery and vein, and the jugular vein of the rat were used to observe the normal distribution of tensile strains and SMC orientation; and a vein graft model was used to observe the influence of altered strain direction on the SMC orientation. The circumferential and longitudinal strains in these blood vessels were measured by using a biomechanical technique, and the SMC orientation was examined by fluorescent microscopy at times of 10, 20, and 30 days. Results showed that the SMCs were mainly oriented in the circumferential direction of straight blood vessels with an average angle of approximately 85 deg between the SMC axis and the vessel axis in all observed cases. The SMC orientation coincided with the principal direction of the circumferential strain, a major tensile strain, in the blood vessel wall. In vein grafts, the major tensile strain direction changed from the circumferential to the longitudinal direction at observation times of 10, 20, and 30 days after graft surgery. This change was associated with a decrease in the angle between the axis of newly proliferated SMCs and that of the vessel at all observation times (43 +/- 11 deg, 42 +/- 10 deg, and 41 +/- 10 deg for days 10, 20, and 30, respectively), indicating a shift of the SMC orientation from the circumferential toward the longitudinal direction. These results suggested that the major tensile strain might play a role in the regulation of SMC orientation during the development of normal blood vessels as well as during remodeling of vein grafts.     

In vivo effects of monoclonal antibody to ICAM-1 (CD54) in nonhuman primates with renal allografts

These studies test whether allograft rejection can be blocked by interference with leukocyte adhesion, using a murine IgG2a mAb (R6.5) reactive with monkey ICAM-1 (CD54). In 16 Cynomolgus renal allograft recipients, R6.5 was administered prophylactically as the sole immunosuppressive agent for 12 days (0.01 to 2 mg/kg/day). Survival in 14 recipients with technically successful grafts was significantly prolonged (24.2 +/- 2.4 vs 9.2 +/- 0.6 days for controls; p less than 0.001). Intercellular adhesion molecule-1 (CD54) (ICAM-1) was expressed on vascular endothelium in the kidney and other organs in the monkey in a pattern similar to that in humans. During cellular rejection in controls, ICAM-1 expression increased on endothelial cells, infiltrating mononuclear leukocytes and tubular cells. Biopsies during R6.5 administration showed decreased T cell infiltration (CD2, CD8, CD4) compared with controls and decreased arterial endothelial inflammation. No changes occurred in circulating T cells, aside from variable coating with mIgG. In six of eight other recipients R6.5 administration (0.5 to 2 mg/kg/day for 10 days) reversed preexisting rejection that resulted from taper of Cyclosporine to subtherapeutic levels. Responding grafts showed decreased edema and hemorrhage but no consistent change in the infiltrate. At 1 h after the first dose, mouse IgG deposited primarily on the graft vascular endothelium without any change in the inflammatory infiltrate. Mouse IgG also deposited on the endothelium of normal organs without eliciting an inflammatory response and was cleared from the endothelium within 4 days. Inasmuch as the principal site of binding was the vascular endothelium, we hypothesize that the antibody blocks adhesion to graft ICAM-1 molecules on the vessels. Anti-ICAM-1 also binds to recipient cells and may interfere with Ag presentation and/or T cell interactions. Whatever the mechanism(s), these studies indicate that an anti-ICAM-1 antibody inhibits T cell mediated injury in vivo, and that ICAM-1 is a critical molecule in the pathogenesis of allograft rejection.     

ESM-1 promotes adhesion between monocytes and endothelial cells under intermittent hypoxia

Intermittent hypoxia (IH), the key property of obstructive sleep apnea (OSA), is closely associated with endothelial dysfunction. Endothelial-cell-specific molecule-1 (ESM-1, Endocan) is a novel, reported molecule linked to endothelial dysfunction. The aim of this study is to evaluate the effect of IH on ESM-1 expression and the role of ESM-1 in endothelial dysfunction. We found that serum concentration of ESM-1, inter-cellular adhesion molecule-1 (ICAM-1), and vascular cell adhesion molecule-1 (VCAM-1) is significantly higher in patients with OSA than healthy volunteers (p < 0.01). The expression of ESM-1, hypoxia-inducible factor-1 alpha (HIF-1α), and vascular endothelial growth factor (VEGF) was significantly increased in human umbilical vein endothelial cells (HUVECs) by treated IH in a time-dependent manner. HIF-1α short hairpin RNA and vascular endothelial growth factor receptor (VEGFR) inhibitor inhibited the expression of ESM-1 in HUVECs. ICAM-1 and VCAM-1 expressions were significantly enhanced under IH status, accompanied by increased monocyte–endothelial cell adhesion rate ( p < 0.001). Accordingly, ESM-1 silencing decreased the expression of ICAM-1 and VCAM-1 in HUVECs, whereas ESM-1 treatment significantly enhanced ICAM-1 expression accompanied by increasing adhesion ability. ESM-1 is significantly upregulated by the HIF-1α/VEGF pathway under IH in endothelial cells, playing a critical role in enhancing adhesion between monocytes and endothelial cells, which might be a potential target for IH-induced endothelial dysfunction.     

Comparative analysis of function of reproductive organs of cow and female reindeer. Cellular composition of blood in vessels of reproductive organs

Cellular composition of blood was studied in vessels of reproductive organs and jugular vein in females of reindeer and cow depending on their physiological state. Physiological leukocytosis was revealed in reproductive organs of the animals, the most expressed in reindeer. In both species, during the estrous cycle, in blood of vessels of reproductive organs the content of lymphocytes and monocytes is higher than that of granulocytes. With onset of pregnancy, in vessels of ovary and uterus in reindeer and cow the number of lymphocytes and monocytes decreases, while the number of granulocytes increases due to a rise of eosinophils and basophils. The more successful reproduction of reindeer females under conditions of North seems to be owing to an increased immune reactivity of reproductive organs.     

The influence of garlic (Allium sativum) extract on interleukin 1alpha-induced expression of endothelial intercellular adhesion molecule-1 and vascular cell adhesion molecule-1.

Inflammation plays an important role in both the initiation of atherosclerosis and development of atherothrombotic events. The adherence of leukocytes/monocytes to the endothelium is an early event in atherogenesis. Phytotherapeutica as garlic and garlic extracts were shown to have beneficial modulating effects in patients with atherosclerotic disease. The aim of this study was to evaluate in vitro the influence of water-soluble garlic (Allium sativum) extract on the cytokine-induced expression of endothelial leukocyte adhesion molecules such as intercellular adhesion molecule-1 (ICAM-1, CD54) and vascular cell adhesion molecule-1 (VCAM-1, CD106). Cytokine-induced expression of cellular adhesion molecules was measured on primary human coronary artery endothelial cell (HCAEC) cultures. HCAEC were cultured in microvascular endothelial cell growth medium and preincubated with garlic extract at various concentrations (0.25-4.0 mg/ml), after which human interleukin-1alpha (IL-1alpha, 10 ng/ml) was added for 1 day. Fluorescein isothiocyanate (FITC)-labeled anti-ICAM-1 and FITC-labeled anti-VCAM-1 were used to analyze the IL-1alpha-induced expression of ICAM-1 and VCAM-1 by flow cytometry. Incubation of HCAEC with garlic extract significantly decreased ICAM-1 and VCAM-1 expression induced by IL-1alpha. In addition, we examined the effects of garlic extract on the adhesion of monocytes to endothelial cells, using the monocytic U937 cell line. The presence of garlic extract significantly inhibited the adhesion of monocytes to IL-1alpha-stimulated endothelial cells. These results indicate that garlic extract modulates the expression of ICAM-1 and VCAM-1, thus potentially contributing to the beneficial effects traditionally attributed to garlic.     

Biaxial mechanical properties of bovine jugular venous valve leaflet tissues

Venous valve incompetence has been implicated in diseases ranging from chronic venous insufficiency (CVI) to intracranial venous hypertension. However, while the mechanical properties of venous valve leaflet tissues are central to CVI biomechanics and mechanobiology, neither stress–strain curves nor tangent moduli have been reported. Here, equibiaxial tensile mechanical tests were conducted to assess the tangent modulus, strength and anisotropy of venous valve leaflet tissues from bovine jugular veins. Valvular tissues were stretched to 60% strain in both the circumferential and radial directions, and leaflet tissue stress–strain curves were generated for proximal and distal valves (i.e., valves closest and furthest from the right heart, respectively). Toward linking mechanical properties to leaflet microstructure and composition, Masson’s trichrome and Verhoeff–Van Gieson staining and collagen assays were conducted. Results showed: (1) Proximal bovine jugular vein venous valves tended to be bicuspid (i.e., have two leaflets), while distal valves tended to be tricuspid; (2) leaflet tissues from proximal valves exhibited approximately threefold higher peak tangent moduli in the circumferential direction than in the orthogonal radial direction (i.e., proximal valve leaflet tissues were anisotropic; \(p<0.01\)); (3) individual leaflets excised from the same valve apparatus appeared to exhibit different mechanical properties (i.e., intra-valve variability); and (4) leaflets from distal valves exhibited a trend of higher soluble collagen concentrations than proximal ones (i.e., inter-valve variability). To the best of the authors’ knowledge, this is the first study reporting biaxial mechanical properties of venous valve leaflet tissues. These results provide a baseline for studying venous valve incompetence at the tissue level and a quantitative basis for prosthetic venous valve design.     

Simulation of flow through a Miller cuff bypass graft

Unnatural temporal and spatial distributions of wall shear stress in the anastomosis of distal bypass grafts have been identified as possible factors in the development of anastomotic intimal hyperplasia in these grafts. Distal bypass graft anastomoses with an autologus vein cuff (a Miller cuff) interposed between the graft and artery have been shown to alleviate the effects of intimal hyperplasia. In this study, pulsatile flow through models of a standard end-to-side anastomosis and a Miller cuff anastomosis are computed and the resulting wall shear stress and pressure distributions analysed. The results are inconclusive, and could be taken to suggest that the unnatural distributions of shear stress that do occur along the anastomosis floor may not be particularly important in the development of intimal hyperplasia. However, it seems more likely that the positive effects of the biological and material properties of the vein cuff, which are not considered in this study, somehow outweigh the negative effects of the shear stress distributions predicted to occur on the floor of the Miller-cuff graft.     

Local increase of ovarian steroid hormone concentration in blood supplying the oviduct and uterus during early pregnancy of sows

Countercurrent transfer in the ovarian vascular pedicle elevates the concentration of steroid hormones in blood supplying the oviduct and periovarian part of the uterus during the estrous cycle in the pig. This study was conducted to determine whether during early pregnancy the arterial blood supply to the oviduct and uterus carries greater concentration of steroid hormone than systemic blood. The concentration of ovarian steroid hormones (progesterone, estradiol-17 beta, estrone, androstenedione and testosterone) was measured in 40 gilts on Days 12, 18, 25 or 35 of pregnancy. Silastic catheters were inserted: a) into the jugular vein, b) into the branch of uterine artery close to the ovary (proximal to the ovary) and c) into the branch of the uterine artery close to the cervix (distal to the ovary). On the day following surgery simultaneous blood samples from cannulated vessels were collected every 20 min for 3 hours. The concentration of steroid hormones was determined by radioimmunoassay. The mean concentrations of studied hormones in branches of the uterine artery proximal and distal to the ovary were significantly greater than in the jugular vein (P < 0.001) by 18 to 69% and 7 to 31%, respectively. The concentrations of hormones in proximal and distal to the ovary branch of the uterine artery were also significantly different (P < 0.001). The increase in concentrations of the measured hormones did not differ considerably between investigated days of pregnancy. It is concluded that during maternal recognition of pregnancy, formation of the corpus luteum of pregnancy, implantation of the embryo and the placenta elongation the oviduct and uterus are supplied with locally elevated concentration of steroid hormones compared to systemic blood.     

A musculoskeletal model of the equine forelimb for determining surface stresses and strains in the humerus--part I. Mathematical modeling

Knowledge of the forces that act upon the equine humerus while the horse is standing and the resulting strains experienced by the bone is useful for the prevention and treatment of fractures and for assessing the proximolateral aspect of the bone as a site for obtaining autogenous bone graft material. The first objective was to develop a mathematical model to predict the loads on the proximal half of the humerus created by the surrounding musculature and ground reaction forces while the horse is standing. The second objective was to calculate surface bone stresses and strains at three cross sections on the humerus corresponding to the donor site for bone grafts, a site predisposed to stress fracture, and the middle of the diaphysis. A three-dimensional mathematical model employing optimization techniques and asymmetrical beam analysis was used to calculate shoulder muscle forces and surface strains on the proximal and mid-diaphyseal aspects of the humerus. The active shoulder muscles, which included the supraspinatus, infraspinatus, subscapularis, and short head of the deltoid, produced small forces while the horse is standing; all of which were limited to 4.3% of their corresponding maximum voluntary contraction. As a result, the strains calculated at the proximal cross sections of the humerus were small, with maximum compressive strains of -104microepsilon at the cranial aspect of the bone graft donor cross section. The middle of the diaphysis experienced larger strain magnitudes with compressive strains at the lateral and the caudal aspects and tensile strains at the medial and cranial aspects (-377microepsilon and 258microepsilon maximum values, respectively) while the horse is standing. Small strains at the donor bone graft site do not rule out using this location to harvest bone graft tissue, although strains while rising to a standing position during recovery from anesthesia are unknown. At the site common to stress fractures, small strains imply that the stresses seen by this region while the horse is standing, although applied for long periods of time, are not a cause of fracture in this location. Knowing the specific regions of the middle of the diaphysis of the humerus that experience tensile and compressive strains is valuable in determining optimum placement of internal fixation devices for the treatment of complete fractures.     

Experimental evaluation of flow patterns in interposition vein cuff anastomosis. The influence of non-planarity of the inflow

Clinical evidence suggests that the development of myointimal hyperplasia in prosthetic femorodistal bypass grafts may be reduced by the interposition of a cuff of autologous vein between the graft and the recipient artery. Previous experimental work has shown that some of the benefits may be attributed to the geometry of the cuffed anastomosis. Since the distal anastomosis in vivo is often non-planar we have carried out a preliminary study in a model where the graft is at an angle of 45 degrees to the anterior-posterior plane of the anastomosis. This out-of-plane angulation produces highly asymmetric flow patterns in the anastomosis with significant flow separation on the ipsilateral side of the cuff. In the proximal and distal outflow, however, the velocity vectors show significant helical motion with temporal instability in the distal outflow.     

TGF-beta- and CTGF-mediated fibroblast recruitment influences early outward vein graft remodeling

Luminal shearing forces have been shown to impact both geometric remodeling and the development of intimal hyperplasia. Less well studied is the influence of intramural wall stresses on vessel growth and adaptation. Using a vein graft-fistula configuration to isolate the impact of circumferential wall stress, we identify the reorganization of adventitial myofibroblasts as the dominant histological event that limits early outward remodeling of vein grafts in response to elevated wall stress. We hypothesize that increased production of transforming growth factor-beta (TGF-beta) and connective tissue growth factor (CTGF) induces recruitment of myofibroblasts, promotes adventitial reorganization, and limits early outward remodeling in response to increased intramural wall stress. Vein grafts with a distal arteriovenous fistula in the neck of rabbits were constructed, resulting in a fourfold differential in circumferential wall stress. Using this model, we demonstrate 1) elevated wall stress augments the production of TGF-beta and CTGF, 2) increased TGF-beta expression and CTGF expression are correlated with the enhanced differentiation from fibroblasts to myofibroblasts, as evidenced by the significant increase in the alpha-actin-positive cells in adventitia, and 3) the levels of TGF-beta, CTGF, and alpha-actin are inversely correlated with the magnitude of outward remodeling of the graft wall. Increased wall stress after vein graft implantation appears to induce a TGF-beta- and CTGF-mediated recruitment of adventitial fibroblasts and a conversion to a myofibroblast phenotype. Although important in the maintenance of wall stability in the face of an increased mechanical load, this adventitial adaptation limits early outward remodeling of the vein conduit and may prove deleterious in maintaining long-term vein graft patency.     

Resistin induces monocyte-endothelial cell adhesion by increasing ICAM-1 and VCAM-1 expression in endothelial cells via p38MAPK-dependent pathway

Resistin, firstly reported as an adipocyte-specific hormone, is suggested to be an important link between obesity and diabetes. Recent studies have suggested an association between resistin and atherogenic processes. The adhesion of circulating monocytes to endothelial cells is a critical step in the early stages of atherosclerosis. The purpose of the present study was to investigate the effect of resistin on the adhesion of THP-1 monocytes to human umbilical vein endothelial cells (HUVECs) and the underlying mechanism. Our results showed that resistin caused a significant increase in monocyte adhesion. In exploring the underlying mechanisms of resistin action, we found that resistin-induced monocyte adhesion was blocked by inhibition of p38MAPK activation using SB203580 and SB202190. Furthermore, resistin increased the expression of intercellular adhesion molecule-1 (ICAM-1) and vascular cell adhesion molecule-1 (VCAM-1) by HUVECs and these effects were also p38MAPK-dependent. Resistin-induced monocyte adhesion was also blocked by monoclonal antibodies against ICAM-1 and VCAM-1. Taken together, these results show that resistin increases both the expression of ICAM-1 and VCAM-1 by endothelial cells and monocyte adhesion to HUVECs via p38MAPK-dependent pathways.     

Outflow distribution at the distal anastomosis of infrainguinal bypass grafts

Outflow distribution at the distal anastomosis of infrainguinal bypass grafts remains unquantified in vivo, but is likely to influence flow patterns and haemodynamics, thereby impacting upon graft patency. This study measured the ratio of distal to proximal outflow in 30 patients undergoing infrainguinal bypass for lower limb ischaemia, using a flow probe and a transit-time ultrasonic flow meter. The mean outflow distribution was approximately 75% distal to 25% proximal, with above knee anastomoses having a greater proportion of distal flow (84%) compared to below knee grafts (73%). These in vivo flow characteristics differ significantly from those used in theoretical models studying flow phenomena (50:50 and/or 100:0), and should be incorporated into future research.     

Experience of vein grafting in G?ttingen minipigs.

We experimented with vein grafting surgery on G?ttingen minipigs. Using the internal jugular vein for the tissue graft, we performed side-to-side anastomosis to the carotid artery, to which it runs parallel. One key point in this surgery was to prevent vasospasm of the carotid artery so as to keep the lumen sufficiently patent during anastomosis. The histopathological findings in the grafts which remained patent resembled those of vein grafts in humans. We therefore considered that this technique in minipigs can be applied for the study of coronary artery bypass surgery in humans.     

A possible role of initial cell death due to mechanical stretch in the regulation of subsequent cell proliferation in experimental vein grafts

 The proliferation of vascular cells contributes to the formation of neointima and hypertrophy of the blood vessel wall. Here we show that mechanical stretch possibly regulates the proliferation of vascular cells via the mediation of cell death in a rat vein graft model. The wall of vein grafts is subject to a suddenly increased mechanical stretch due to exposure to arterial blood pressure. Such a stretch induces rapid cell death with a reduction in cell density by ∼60% within the first day after surgery. The initial cell death was followed by an increase in the percentage of proliferating cells, as shown by a BrdU incorporation assay (1.55 ± 1.27%, 8.48 ± 2.27%, 11.93 ± 2.36%, 6.36 ± 1.77%, and 5.60 ± 1.46% at days 1, 5, 10, 20, and 30, respectively). When mechanical stretch was reduced by restraining the vein graft using a polytetrafluoroethylene sheath, the percentage of proliferating cells reduced significantly (0.76 ± 0.76%, 1.70 ± 0.46%, 1.29 ± 0.56%, 0.99 ± 0.83%, and 0.47±0.52% at days 1, 5, 10, 20, and 30, respectively). A further reduction in cell density, induced by local administration of a cell death inducer ceramide to experimental vein grafts (without sheath), enhanced subsequent cell proliferation. In contrast, a prevention of cell death, induced by local administration of a cell death inhibitor tetrapeptide-aldehyde DEVD-CHO to experimental vein grafts (without sheath), significantly reduced subsequent cell proliferation. These results suggest that mechanical stretch induces cell death, which possibly mediates subsequent cell proliferation in the present model. Received: 9 September 2001 / Accepted: 19 November 2001