Why clinically used tazobactam and sulbactam are poor inhibitors of OXA-10 beta-lactamase: Raman crystallographic evidence

The clinically used inhibitors tazobactam and sulbactam are effective in the inhibition of activity of class A beta-lactamases, but not for class D beta-lactamases. The two inhibitors exhibit a complex multistep profile for their chemistry of inhibition with class A beta-lactamases. To compare the inhibition profiles for class A and D enzymes, the reactions were investigated within OXA-10 beta-lactamase (a class D enzyme) crystals using a Raman microscope. The favored reaction pathway appears to be distinctly different from that for class A beta-lactamases. In contrast to the case of class A enzymes that favor the formation of a key enamine species, the OXA-10 enzyme forms an alpha,beta-unsaturated acrylate (acid or ester). Quantum mechanical calculations support the likely product as the adduct of Ser115 to the acrylate. Few enamine-like species are formed by sulbactam or tazobactam with this enzyme. Taken together, our results show that the facile conversion of the initial imine, formed upon acylation of the active site Ser67, to the cis- and/or trans-enamine is disfavored. Instead, there is a significant population of the imine that could either experience cross-linking to a second nucleophile (e.g., Ser115) or give rise to the alpha,beta-unsaturated product and permanent inhibition. Alternatively, the imine can undergo hydrolysis to regenerate the catalytically active OXA-10 enzyme. This last process is the dominant one for class D beta-lactamases since the enzyme is not effectively inhibited. In contrast to sulbactam and tazobactam, the reactions between oxacillin or 6alpha-hydroxyisopropylpenicillinate (both substrates) and OXA-10 beta-lactamase appear much less complex. These compounds lead to a single acyl-enzyme species, the presence of which was confirmed by Raman and MALDI-TOF experiments.     

High resolution crystal structures of the trans-enamine intermediates formed by sulbactam and clavulanic acid and E166A SHV-1 {beta}-lactamase

Antibiotic resistance mediated by constantly evolving beta-lactamases is a serious threat to human health. The mechanism of inhibition of these enzymes by therapeutic beta-lactamase inhibitors is probed using a novel approach involving Raman microscopy and x-ray crystallography. We have presented here the high resolution crystal structures of the beta-lactamase inhibitors sulbactam and clavulanic acid bound to the deacylation-deficient E166A variant of SHV-1 beta-lactamase. Our previous Raman measurements have identified the trans-enamine species for both inhibitors and were used to guide the soaking time and concentration to achieve full occupancy of the active sites. The two inhibitor-bound x-ray structures revealed a linear trans-enamine intermediate covalently attached to the active site Ser-70 residue. This intermediate was thought to play a key role in the transient inhibition of class A beta-lactamases. Both the Raman and x-ray data indicated that the clavulanic acid intermediate is decarboxylated. When compared with our previously determined tazobactam-bound inhibitor structure, our new inhibitor-bound structures revealed an increased disorder in the tail region of the inhibitors as well as in the enamine skeleton. The x-ray crystallographic observations correlated with the broadening of the O-C=C-N (enamine) symmetric stretch Raman band near 1595 cm(-1). Band broadening in the sulbactam and clavulanic acid inter-mediates reflected a heterogeneous conformational population that results from variations of torsional angles in the O-(C=O)-C=C=NH-C skeleton. These observations led us to conclude that the conformational stability of the trans-enamine form is critical for their transient inhibitory efficacy.     

Tazobactam forms a stoichiometric trans-enamine intermediate in the E166A variant of SHV-1 beta-lactamase: 1.63 A crystal structure

Many pathogenic bacteria develop antibiotic resistance by utilizing beta-lactamases to degrade penicillin-like antibiotics. A commonly prescribed mechanism-based inhibitor of beta-lactamases is tazobactam, which can function either irreversibly or in a transient manner. We have demonstrated previously that the reaction between tazobactam and a deacylation deficient variant of SHV-1 beta-lactamase, E166A, could be followed in single crystals using Raman microscopy [Helfand, M. S., et al. (2003) Biochemistry 42, 13386-13392]. The Raman data show that maximal populations of an enamine-like intermediate occur 20-30 min after "soaking in" has commenced. By flash-freezing crystals in this time frame, we were able to trap the enamine species. The resulting 1.63 A resolution crystal structure revealed tazobactam covalently bound in the trans-enamine intermediate state with close to 100% occupancy in the active site. The Raman data also indicated that tazobactam forms a larger population of enamine than sulbactam or clavulanic acid does and that tazobactam's intermediate is also the most long-lived. The crystal structure provides a rationale for this finding since only tazobactam is able to form favorable intra- and intermolecular interactions in the active site that stabilize this trans-enamine intermediate. These interactions involve both the sulfone and triazolyl groups that distinguish tazobactam from clavulanic acid and sulbactam, respectively. The observed stabilization of the transient intermediate of tazobactam is thought to contribute to tazobactam's superior in vitro and in vivo clinical efficacy. Understanding the structural details of differing inhibitor effectiveness can aid the design of improved mechanism-based beta-lactamase inhibitors.     

Inactivation of CMY-2 beta-lactamase by tazobactam: initial mass spectroscopic characterization.

The CMY-2 beta-lactamase, a plasmid determined class C cephalosporinase, was shown to be susceptible to inhibition by tazobactam (K(i)=40 microM). The reaction product(s) of CMY-2 beta-lactamase with the beta-lactamase inhibitor tazobactam were analyzed by electrospray ionization/mass spectrometry (ESI/MS) to characterize the prominent intermediates of the inactivation pathway. The ESI/MS determined mass of CMY-2 beta-lactamase was 39851+/-3 Da. After inactivating CMY-2 beta-lactamase with excess tazobactam, a single species, M(r)=39931+/-3.0, was detected. Comparison of the peptide maps from tryptic digestion of the native enzyme and the inactivated beta-lactamase followed by LC/MS identified two 22 amino acid peptides containing the active site Ser64 modified by a fragment of tazobactam. These two peptides were increased in mass by 70 and 88 Da, respectively. UV difference spectra following inactivation revealed the presence of a new species with a 302 nm lambda(max). Based upon the increase in molecular mass of the tazobactam inactivated CMY-2 beta-lactamase, we propose that during the inactivation of this beta-lactamase by tazobactam an imine is formed. Tautomerization forms the spectrally observed enamine. Hydrolysis generates the covalently attached malonyl semialdehyde, its hydrate, or an enol. This work provides information on the mass of a stable enzyme intermediate of a class C beta-lactamase inactivated by tazobactam and, for the first time, unequivocal evidence that a cross-linked species is not required for apparent inactivation.     

Inhibition of the SHV-1 beta-lactamase by sulfones: crystallographic observation of two reaction intermediates with tazobactam

Two species resulting from the reaction of the SHV-1 class A beta-lactamase with the sulfone inhibitor tazobactam have been trapped at 100 K and mapped by X-ray crystallography at 2.0 A resolution. An acyclic form of tazobactam is covalently bonded to the catalytic Ser70 side chain, and a second species, a five-atom vinyl carboxylic acid fragment of tazobactam, is bonded to Ser130. It is proposed that the electron density map of the crystal is a composite picture of two complexes, each with only a single bound species. It is estimated that the two complexes exist in the crystal in approximately equal populations. Results are discussed in relation to the mechanism-based inhibition of class A beta-lactamases by the similar inhibitors sulbactam and clavulanic acid.     

Effect of the inhibitor-resistant M69V substitution on the structures and populations of trans-enamine beta-lactamase intermediates

The objective of this study was to determine the molecular factors that lead to beta-lactamase inhibitor resistance for the M69V variant in SHV-1 beta-lactamase. With mechanism-based inhibitors, the beta-lactamase forms an acyl-enzyme intermediate that consists of a trans-enamine derivative in the active site. This study focuses on these intermediates by introducing the E166A mutation that greatly retards deacylation. Thus, by comparing the properties of the E166A and M69V/E166A forms, we can explore the consequences of the resistance mutation at the level of the enamine acyl-enzyme forms. The reactions between the beta-lactamase and the inhibitors tazobactam, sulbactam, and clavulanic acid are followed in single crystals of the enzymes by using a Raman microscope. The resulting Raman difference spectroscopic data provide detailed information about conformational events involving the enamine species as well as an estimate of their populations. The Raman difference spectra for each of the inhibitors in the E166A and M69V/E166A variants are very similar. In particular, detailed analysis of the main enamine Raman vibration near 1595 cm(-1) reveals that the structure and flexibility of the enamine fragments are essentially identical for each of the three inhibitors in E166A and in the M69V/E166A double mutant. This finding is in accord with the X-ray-derived structures, presented herein at 1.6-1.75 A resolution, of the trans-enamine intermediates formed by the three inhibitors in M69V/E166A. However, a comparison of Raman results for M69V/E166A and E166A shows that the M69V mutation results in a 40%, 25%, and negligible reductions in the enamine population when the beta-lactamase crystals are soaked in 5 mM tazobactam, clavulanic acid, and sulbactam solutions, respectively. The levels of enamine from tazobactam and clavulanic acid can be increased by increasing the concentrations of inhibitor in the mother liquor. Thus, the sensitivity of population levels to the inhibitor concentration in the mother liquor focuses attention on the properties of the encounter complex preceding acylation. It is proposed that for small ligands, such as tazobactam, sulbactam, and clavulanic acid, the positioning of the lactam ring in the active site in the correct orientation for acylation is only one of a number of poorly defined conformations. For tazobactam and clavulanic acid, the correctly oriented encounter complex is even less likely in the M69V variant, leading to a reduction in the level of inhibition of the enzyme via formation of the acyl-enzyme intermediate and the onset of resistance. Analysis of the X-ray structures of the three intermediates in M69V/E166A demonstrates that, compared to the structures for the E166A form, the oxyanion hole becomes smaller, providing one explanation for why acylation may be less efficient following the M69V substitution.     

Overcoming resistance to beta-lactamase inhibitors: comparing sulbactam to novel inhibitors against clavulanate resistant SHV enzymes with substitutions at Ambler position 244

Amino acid changes at Ambler position R244 in class A TEM and SHV beta-lactamases confer resistance to ampicillin/clavulanate, a beta-lactam/beta-lactamase inhibitor combination used to treat serious infections. To gain a deeper understanding of this resistance phenotype, we investigated the activities of sulbactam and two novel penem beta-lactamase inhibitors with sp2 hybridized C3 carboxylates and bicyclic R1 side chains against a library of SHV beta-lactamase variants at the 244 position. Compared to SHV-1 expressed in Escherichia coli, all 19 R244 variants exhibited increased susceptibility to ampicillin/sulbactam, an important difference compared to ampicillin/clavulanate. Kinetic analyses of SHV-1 and three SHV R244 (-S, -Q, and -L) variants revealed the Ki for sulbactam was significantly elevated for the R244 variants, but the partition ratios, kcat/kinact, were markedly reduced (13 000 --> 相似文献   

Following the reactions of mechanism-based inhibitors with beta-lactamase by Raman crystallography

The reactions between three clinically relevant inhibitors, tazobactam, sulbactam, and clavulanic acid, and SHV beta-lactamase (EC 3.5.2.6) have been followed in single crystals using a Raman microscope. The data are far superior to those obtained for the enzyme in aqueous solution and allow us to identify species on the reaction pathway and to measure the rates of the accumulation and decay of these species. A key intermediate on the reaction pathway is an acyl enzyme formed between Ser70 and the lactam ring's C=O group. By using the E166A deacylation deficient variant of the enzyme, we were able to focus on the process of acyl enzyme formation. The Raman data show that all three inhibitors form an enamine-type acyl enzyme reaching maximal populations at 10, 22, and 29 min for sulbactam, clavulanic acid, and tazobactam, respectively. The enamine intermediate exhibits a characteristic and relatively intense band near 1595 cm(-1) due to a stretching motion of the O=C-C=C-NH moiety that shifts to lower frequency upon NH <--> ND exchange. This feature was used to follow the kinetics of enamine buildup and decay in the crystal. Quantum mechanical calculations support the assignment of the 1595 cm(-1) band, as well as several other bands, to a trans-enamine species. The Raman data also demonstrate that the lactam ring opens prior to enamine formation since the lactam ring carbonyl (C=O) peak disappears prior to the appearance of the enamine 1595 cm(-1) band. Tazobactam appears to form approximately twice as much enamine intermediate as sulbactam and clavulanic acid, which correlates with its superior performance in the clinic, a finding that may bear on future drug design.     

Why tazobactam and sulbactam have different intermediates population with SHV-1 β-lactamase: a molecular dynamics study

The imine intermediates of tazobactam and sulbactam bound to SHV-1 β-lactamase were investigated by molecular dynamics (MD) simulation respectively. Hydrogen bond networks around active site were found different between tazobactam and sulbactam acyl-enzymes. In tazobactam imine intermediate, it was observed that the triazolyl ring formed stable hydrogen bonds with Asn170 and Thr167. The results suggest that conformation of imine determined the population of intermediates. In imine intermediate of tazobactam, the triazolyl ring is trapped in Thr_Asn pocket, and it restricts the rotation of C5-C6 bond so that tazobactam can only generate trans enamine intermediate. Further, conformational cluster analyses are performed to substantiate the results. These findings provide an explanation for the corresponding experimental results, and will be potentially useful in the development of new inhibitors.

Efficient inhibition of class A and class D beta-lactamases by Michaelis complexes

A 6-alkylidiene penam sulfone, SA-1-204, is an efficient inhibitor of both SHV-1 and OXA-1 beta-lactamases with K(I) = 42 +/- 4 nm and 1.0 +/- 0.1 microm, respectively. To gain insight into the reaction chemistry of SA-1-204, the reactions between this inhibitor and SHV-1 and OXA-1 were studied by Raman spectroscopy in single crystals and in solution. Raman signatures characteristic of the unreacted beta-lactam ring show that in both phases the inhibitor binds as a noncovalent Michaelis-like complex. This complex is present as the major population for periods of up to an hour. On longer time scales, the Raman data show that beta-lactam ring opening eventually leads to a complex mixture of reaction products. However, the data clearly demonstrate that the key species for inhibition on the time scale of bacterial half-lives is the noncovalent complex preceding acylation.     

Types of beta-lactamase determined by plasmids in gram-negative bacteria.

Two species of beta-lactamase determined by plasmids in enteric bacteria that show some resemblance to TEM enzymes are described. Both are distinct from all other plasmid-mediated beta-lactamases and differ from the TEM beta-lactamases in ability to hydrolyze some substrates, in isoelectric point, in immunological specificity, and in susceptibility to inhibition. One of the enzyme species, mediated by plasmid p453, has been briefly described previously. We have discovered that this beta-lactamase, designated SHV-1, is unique in its response to inhibition by the sulfhydryl group reagent p-chloromercuribenzoate, because the hydrolysis of cephaloridine but not that of benzylpenicillin is affected. This enzyme is found in a variety of plasmid types which were transferred from several bacterial species collected from a wide geographic range. The other enzyme species is novel; only a single plasmid determining this kind of beta-lactamase (designated HMS-1) has been detected.     

Clavulanic acid inactivation of SHV-1 and the inhibitor-resistant S130G SHV-1 beta-lactamase. Insights into the mechanism of inhibition

Clavulanic acid is a potent mechanism-based inhibitor of TEM-1 and SHV-1beta-lactamases, enzymes that confer resistance to beta-lactams in many gram-negative pathogens. This compound has enjoyed widespread clinical use as part of beta-lactam beta-lactamase inhibitor therapy directed against penicillin-resistant pathogens. Unfortunately, the emergence of clavulanic acid-resistant variants of TEM-1 and SHV-1 beta-lactamase significantly compromise the efficacy of this combination. A single amino acid change at Ambler position Ser130 (Ser --> Gly) results in resistance to inactivation by clavulanate in the SHV-1 and TEM-1beta-lactamases. Herein, we investigated the inactivation of SHV-1 and the inhibitor-resistant S130G variant beta-lactamases by clavulanate. Using liquid chromatography electrospray ionization mass spectrometry, we detected multiple modified proteins when SHV-1 beta-lactamase is inactivated by clavulanate. Matrix-assisted laser desorption ionization-time of flight mass spectrometry was used to study tryptic digests of SHV-1 and S130Gbeta-lactamases (+/- inactivation with clavulanate) and identified peptides modified at the active site Ser70. Ultraviolet (UV) difference spectral studies comparing SHV-1 and S130Gbeta-lactamases inactivated by clavulanate showed that the formation of reaction intermediates with absorption maxima at 227 and 280 nm are diminished and delayed when S130Gbeta-lactamase is inactivated. We conclude that the clavulanic acid inhibition of the S130G beta-lactamase must follow a branch of the normal inactivation pathway. These findings highlight the importance of understanding the intermediates formed in the inactivation process of inhibitor-resistant beta-lactamases and suggest how strategic chemical design can lead to novel ways to inhibit beta-lactamases.     

Raman crystallographic studies of the intermediates formed by Ser130Gly SHV, a beta-lactamase that confers resistance to clinical inhibitors

Antibiotic resistance to beta-lactam compounds in Gram-negative bacteria such as Escherichia coli and Klebsiella pneumoniae is often mediated by beta-lactamase enzymes like TEM and SHV. Previously, a limited number of inhibitors have shown efficacy in combating such bacterial drug resistance. However, many Gram-negative pathogens have evolved inhibitor resistant forms of these hydrolytic enzymes. A single point mutation of the active site residue Ser130 to a Gly in either TEM or SHV results in resistance to amoxicillin and clavulanic acid, an important clinical beta-lactam-beta-lactamase inhibitor combination antibiotic. Previous structural and modeling studies of the S130G mutants of TEM and SHV have shown differences in how these two distinct but closely related enzymes compensate for the loss of the Ser130 residue. In the case of S130G SHV, a structure of tazobactam in the active site has suggested that the inhibitor preferentially assumes a cis-enamine intermediate form when the Ser130 hydroxyl is absent. Raman crystallographic studies of S130G SHV inhibited with tazobactam, sulbactam, clavulanic acid, and 2'-glutaroxy penem sulfone (SA2-13) were performed with the aim of identifying the type and amount of intermediate formed with each drug to understand the role of the S130G mutation in formation of the important enamine intermediates. It is demonstrated that with the exception of sulbactam, each compound forms observable trans-enamine intermediates. For S130G reacted with tazobactam, identical steady state levels of enamine are achieved when compared to those of wild-type (WT) or even deacylation deficient forms of the enzyme. With clavulanic acid, slightly smaller amounts of enamine are observed within the first 30 min of the reaction but are not significantly different than those for tazobactam. Thus, the resistance mutation does not substantially affect the amount of trans-enamine formed with clavulanic acid during the critical early time period of inhibition. This finding has important implications in the design of beta-lactamase inhibitors for drug resistant variants like S130G SHV.     

Inhibition of class A and class C beta-lactamases by penems: crystallographic structures of a novel 1,4-thiazepine intermediate

A new beta-lactamase inhibitor, a methylidene penem having a 5,6-dihydro-8H-imidazo[2,1-c][1,4]oxazine heterocyclic substituent at the C6 position with a Z configuration, irreversibly inhibits both class A and class C serine beta-lactamases with IC(50) values of 0.4 and 9.0 nM for TEM-1 and SHV-1 (class A), respectively, and 4.8 nM in AmpC (class C) beta-lactamases. The compound also inhibits irreversibly the class C extended-spectrum GC1 beta-lactamase (IC(50) = 6.2 nM). High-resolution crystallographic structures of a reaction intermediate of (5R)-(6Z)-6-(5,6-dihydro-8H-imidazo[2,1-c][1,4]oxazin-2-ylmethylene)-7-oxo-4-thia-1-azabicyclo[3.2.0]hept-2-ene-3-carboxylic acid 1 with the SHV-1 beta-lactamase and with the GC1 beta-lactamase have been determined by X-ray diffraction to resolutions of 1.10 and 1.38 A, respectively. The two complexes were refined to crystallographic R-factors (R(free)) of 0.141 (0.186) and 0.138 (0.202), respectively. Cryoquenching of the reaction of 1 with each beta-lactamase crystal produced a common, covalently bound intermediate. After acylation of the serine, a nucleophilic attack by the departing thiolate on the C6' atom yielded a novel seven-membered 1,4-thiazepine ring having R stereochemistry at the new C7 moiety. The orientation of this ring in each complex differs by a 180 degrees rotation about the bond to the acylated serine. The acyl ester bond is stabilized to hydrolysis through resonance stabilization with the dihydrothiazepine ring and by low occupancy or disorder of hydrolytic water molecules. In the class A complex, the buried water molecule on the alpha-face of the ester bond appears to be loosely bound or absent. In the class C complex, a water molecule on the beta-face is disordered and poorly activated for hydrolysis. Here, the acyl intermediate is unable to assist its own hydrolysis, as is thought to occur with many class C substrates.     

Carbapenems and SHV-1 beta-lactamase form different acyl-enzyme populations in crystals and solution

The reactions between single crystals of the SHV-1 beta-lactamase enzyme and the carbapenems, meropenem, imipenem, and ertapenem, have been studied by Raman microscopy. Aided by quantum mechanical calculations, major populations of two acyl-enzyme species, a labile Delta (2)-pyrroline and a more tightly bound Delta (1)-pyrroline, have been identified for all three compounds. These isomers differ only in the position of the double bond about the carbapenem nucleus. This discovery is consonant with X-ray crystallographic findings that also identified two populations for meropenem bound in SHV-1: one with the acyl CO group in the oxyanion hole and the second with the acyl group rotated 180 degrees compared to its expected position [Nukaga, M., Bethel, C. R., Thomson, J. M., Hujer, A. M., Distler, A. M., Anderson, V. E., Knox, J. R., and Bonomo, R. A. (2008) J. Am. Chem. Soc. (in press)]. When crystals of the Delta (1)- and Delta (2)-containing acyl-enzymes were exposed to solutions with no carbapenem, rapid deacylation of the Delta (2) species was observed by kinetic Raman experiments. However, no change in the Delta (1) population was observed over 1 h, the effective lifetime of the crystal. These observations lead to the hypothesis that the stable Delta (1) species is due to the form seen by X-ray with the acyl carbonyl outside the oxyanion hole, while the Delta (2) species corresponds to the form with the carbonyl inside the oxyanion hole. Soak-in and soak-out Raman experiments also demonstrated that tautomeric exchange between the Delta (1) and Delta (2) forms does not occur on the crystalline enzyme. When meropenem or ertapenem was reacted with SHV-1 in solution, the Raman difference spectra demonstrated that only a major population corresponding to the Delta (1) acyl-enzyme could be detected. The 1003 cm (-1) mode of the phenyl ring positioned on the C3 side chain of ertapenem acts as an effective internal Raman intensity standard, and the ratio of its intensity to that of the 1600 cm (-1) feature of Delta (1) provides an estimate of the relative populations of Delta (1). In solution, I 1600/ I 1003 equals 2, and in the crystal, I 1600 /I 1003 equals 1. This is strong evidence that the Delta (1) and Delta (2) acyl-enzymes in the crystal are present in approximately equal amounts, in agreement with the X-ray data. However, in solution there are twice as many Delta (1) species per Phe group, and this represents approximately 100% of the active sites, which is consistent with the observed inhibition of the enzyme's activity.     

1,4,9,10-Anthradiquinone as precursor for antitumor compounds

1,4,9,10-Anthradiquinone 5 was reacted with enamines 6 in the Nenitzescu reaction to yield unexpected 3,3a,6,12-tetrahydro-3a,7-dihydroxy-2-methyl-6,12-dioxo-naphtho[2,3-d]indol-1-carboxylates 8A. However, anthracycline-like naphtho-condensed 5-hydroxyindoles were not obtained from this diquinone. It yielded similar reaction products of the Nenitzescu reaction like other quinones activated by two electron-withdrawing groups. Furthermore, these new compounds 8A were found to constitute precursors for the synthesis of azonines. The conversion to dibenzoazonines 13 occurred in an unusual and up to now unknown way consisting of isomerization, ring opening, and re-closure. 2-Chloro-anthradiquinone 19 reacted with enamines 6 as vinylogeous acid chloride to pyrroloanthraquinone 20. No substitution of chlorine was observed. Naphtho-condensed indoles 26 were obtained by the reactions of unsubstituted 1,4-anthraquinone 25 with enamines 6 via the normal Nenitzescu route. Indoles 26 were converted to Mannich bases, reacting further to dimers by the Diels-Alder reaction of intermediate o-quinone methides. Most of the synthesized heterocycles were evaluated for their anticancer properties in the NCI's human-disease oriented in vitro anticancer screen. Particularly, carbinolamines 8A exhibited inhibitory activity of tumor cell growth and thus they constitute a new class of lead structures for anticancer drug design.     

Understanding resistance to beta-lactams and beta-lactamase inhibitors in the SHV beta-lactamase: lessons from the mutagenesis of SER-130

Bacterial resistance to beta-lactam/beta-lactamase inhibitor combinations by single amino acid mutations in class A beta-lactamases threatens our most potent clinical antibiotics. In TEM-1 and SHV-1, the common class A beta-lactamases, alterations at Ser-130 confer resistance to inactivation by the beta-lactamase inhibitors, clavulanic acid, and tazobactam. By using site-saturation mutagenesis, we sought to determine the amino acid substitutions at Ser-130 in SHV-1 beta-lactamase that result in resistance to these inhibitors. Antibiotic susceptibility testing revealed that ampicillin and ampicillin/clavulanic acid resistance was observed only for the S130G beta-lactamase expressed in Escherichia coli. Kinetic analysis of the S130G beta-lactamase demonstrated a significant elevation in apparent Km and a reduction in kcat/Km for ampicillin. Marked increases in the dissociation constant for the preacylation complex, KI, of clavulanic acid (SHV-1, 0.14 microm; S130G, 46.5 microm) and tazobactam (SHV-1, 0.07 microm; S130G, 4.2 microm) were observed. In contrast, the k(inact)s of S130G and SHV-1 differed by only 17% for clavulanic acid and 40% for tazobactam. Progressive inactivation studies showed that the inhibitor to enzyme ratios required to inactivate SHV-1 and S130G were similar. Our observations demonstrate that enzymatic activity is preserved despite amino acid substitutions that significantly alter the apparent affinity of the active site for beta-lactams and beta-lactamase inhibitors. These results underscore the mechanistic versatility of class A beta-lactamases and have implications for the design of novel beta-lactamase inhibitors.     

Penicillanic acid sulfone: an unexpected isotope effect in the interaction of 6 alpha- and 6 beta-monodeuterio and of 6,6-dideuterio derivatives with RTEM beta-lactamase from Escherichia coli

Penicillanic acid sulfone (1) is both a substrate and an inactivator of the RTEM beta-lactamase. About 7000 hydrolytic events occur before enzyme inactivation. The 6,6-dideuterio sulfone shows a 3-fold acceleration of both the hydrolysis reaction and the enzyme inactivation. The kinetic and spectroscopic results are nicely accommodated by a scheme in which a transiently stable intermediate is formed in an isotopically sensitive step. The deuterated material partitions less readily toward this transiently stable intermediate by virtue of a primary isotope effect, and more enzyme is then available for the hydrolysis and inactivation pathways. Use of the stereospecifically monodeuterated sulfones shows that the 6 beta hydrogen is preferentially abstracted in the formation of the transiently stable intermediate and allows a detailed picture of the interaction of the sulfone and the beta-lactamase to be drawn. The crystal structures of both the labeled and unlabeled compounds are reported.     

Effect of sulbactam on anti-pseudomonal activity of beta-lactam antibiotics in cells producing various levels of the MexAB-OprM efflux pump and beta-lactamase

The beta-lactamase inhibitor, sulbactam, was tested for beta-lactamase inhibitory activity in Pseudomonas aeruginosa cells producing various levels of both the MexAB-OprM efflux pump and beta-lactamase. We found that sulbactam lowered the MICs of cefoperazone and piperacillin by inhibiting the beta-lactamase 8-fold in the cell producing a constitutively high level of AmpC-type beta-lactamase and a wild-type level of MexAB-OprM pump compared with that without sulbactam. The MICs of cefoperazone and piperacillin in the cell producing a constitutively high level of both the efflux pump and beta-lactamase under the presence of sulbactam were 8 and 4 times, respectively, lower than that without sulbactam. The MICs of sulbactam in the cell producing a constitutively high and a wild-type level of the efflux pump were 16- and 8-fold higher, respectively, than that in the mutant lacking the efflux pump. We concluded that sulbactam exerts potent beta-lactamase inhibitory activity in the cell producing a high level of efflux pump, in spite of the fact that sulbactam serves as a substrate of the MexAB-OprM pump. Increasing amounts of sulbactam over the weight of beta-lactams further strengthen the effect of beta-lactam antibiotics.     

Structural and computational characterization of the SHV-1 beta-lactamase-beta-lactamase inhibitor protein interface

Beta-lactamase inhibitor protein (BLIP) binds a variety of class A beta-lactamases with affinities ranging from micromolar to picomolar. Whereas the TEM-1 and SHV-1 beta-lactamases are almost structurally identical, BLIP binds TEM-1 approximately 1000-fold tighter than SHV-1. Determining the underlying source of this affinity difference is important for understanding the molecular basis of beta-lactamase inhibition and mechanisms of protein-protein interface specificity and affinity. Here we present the 1.6A resolution crystal structure of SHV-1.BLIP. In addition, a point mutation was identified, SHV D104E, that increases SHV.BLIP binding affinity from micromolar to nanomolar. Comparison of the SHV-1.BLIP structure with the published TEM-1.BLIP structure suggests that the increased volume of Glu-104 stabilizes a key binding loop in the interface. Solution of the 1.8A SHV D104K.BLIP crystal structure identifies a novel conformation in which this binding loop is removed from the interface. Using these structural data, we evaluated the ability of EGAD, a program developed for computational protein design, to calculate changes in the stability of mutant beta-lactamase.BLIP complexes. Changes in binding affinity were calculated within an error of 1.6 kcal/mol of the experimental values for 112 mutations at the TEM-1.BLIP interface and within an error of 2.2 kcal/mol for 24 mutations at the SHV-1.BLIP interface. The reasonable success of EGAD in predicting changes in interface stability is a promising step toward understanding the stability of the beta-lactamase.BLIP complexes and computationally assisted design of tight binding BLIP variants.