Construction of tandem repeats of DNA fragments by a polymerase chain reaction-based method

We describe a new application of megaprimer polymerase chain reaction (PCR) for constructing a tandemly repeated DNA sequence using the drought responsive element (DRE) from Arabidopsis thaliana as an example. The key feature in the procedure was PCR primers with partial complementarity but differing melting temperatures (T(m)). The reverse primer had a higher T(m), a 3' end complementary to the DRE sequence and a 5' region complementary to the forward primer. The initial cycles of the PCR were conducted at a lower primer annealing temperature to generate products that served as megaprimers in the later cycles conducted at a higher temperature to prevent annealing of the forward primer. The region of overlap between the megaprimers was extended for generating products with a variable copy number (one to four copies) of tandem DRE sequence repeats (71?bp). The PCR product with four tandem repeats (4× DRE) was used as a template to generate tandem repeats with higher copies (copy number large than four) or demonstrated to bind DRE-binding protein in an yeast one-hybrid assay using promotorless reporter genes (HIS and lacZ). This PCR protocol has numerous applications for generating DNA fragments of repeated sequences.     

New insights into the QuikChangeTM process guide the use of Phusion DNA polymerase for site-directed mutagenesis

The QuikChange^TM site-directed mutagenesis method is popular but imperfect. An improvement by using partially overlapping primers has been reported several times; however, it is incompatible with the proposed mechanism. The QuikChange^TM method using complementary primers is proposed to linearly amplify a target plasmid with the products annealing to produce double-stranded DNA molecules with 5′-overhangs. The overhang annealing is supposed to form circular plasmids with staggered breaks, which can be repaired in Escherichia coli after transformation. Here, we demonstrated that the PCR enzyme fills the 5′-overhangs in the early cycles, and the product is then used as the template for exponential amplification. The linear DNA molecules with homologous ends are joined to generate the plasmid with the desired mutations through homologous recombination in E. coli. The correct understanding is important to method improvements, guiding us to use partially overlapping primers and Phusion DNA polymerase for site-directed mutagenesis. Phusion did not amplify a plasmid with complementary primers but used partially overlapping primers to amplify the plasmid, producing linear DNA molecules with homologous ends for site-directed mutagenesis.     

PCR fragmentation of DNA

A method has been developed to prepare random DNA fragments using PCR. First, two cycles are carried out at 16 degrees C with the Klenow's fragment and oligonucleotides (random primers) with random 3'-sequences and the 5'-constant part containing the site for cloning with the site-specific endonuclease. The random primers can link to any DNA site, and random DNA fragments are formed during DNA synthesis. During the second cycle, after denaturation of the DNA and addition of the Klenow's fragment, the random primers can link to newly synthesized DNA strands, and after DNA synthesis single-stranded DNA fragments are produced which have a constant primer sequence at the 5'-end and a complementary to it sequence at the 3'-end. During the third cycle, the constant primer is added and double-stranded fragments with the constant primer sequences at both ends are formed during DNA synthesis. Incubation for 1 h at 37 degrees C degrades the oligonucleotides used at the first stage due to endonuclease activity of the Klenow's fragment. Then routine PCR amplification is carried out using the constant primer. This method is more advantageous than hydrodynamic methods of DNA fragmentation widely used for "shotgun" cloning.     

PCR hot start using primers with the structure of molecular beacons (hairpin-like structure)

A new technique of PCR hot start using oligonucleotide primers with a stem–loop structure is developed here. The molecular beacon oligonucleotide structure without any chromophore addition to the ends was used. The 3′-end sequence of the primers was complementary to the target and five or six nucleotides complementary to the 3′-end were added to the 5′-end. During preparation of the reaction mixture and initial heating, the oligonucleotide has a stem–loop structure and cannot serve as an effective primer for DNA polymerase. After heating to the annealing temperature it acquires a linear structure and primer extension can begin.     

A polymerase chain reaction mediated by a single primer: cloning of genomic sequences adjacent to a serotonin receptor protein coding region.

Under appropriate conditions, specific double-stranded DNA product was generated after amplification of genomic DNA sequences in a polymerase chain-like reaction that contained only a single primer. This type of amplification reaction was performed with a variety of primers and substrate DNAs. In addition to nonspecific heterogeneous products, 5 of 11 primers reproducibly directed synthesis of double-stranded DNA that corresponded to the region of the template that contained the authentic primer annealing site. Three of these amplified products were cloned and their ends were sequenced. All three contained a copy of the primer at both 5' ends, and the position of one of the primers represented the authentic primer binding site. In each case, the location of the second copy of the primer indicated that it had initially hybridized to a partially homologous sequence in the template DNA. This single primer reaction makes it possible to amplify and clone a DNA region of unknown sequence that is adjacent to a known DNA sequence. One of the single primer reaction products described here included sequence to the 5' side of the coding region of a serotonin receptor gene that contained a functional promoter.     

Target region amplification polymorphism: A novel marker technique for plant genotyping

The advent of large-scale DNA sequencing technology has generated a tremendous amount of sequence information for many important organisms. We have developed a rapid and efficient PCR-based technique, which uses bioinformatics tools and expressed sequence tag (EST) database information to generate polymorphic markers around targeted candidate gene sequences. This target region amplification polymorphism (TRAP) technique uses 2 primers of 18 nucleotides to generate markers. One of the primers, the fixed primer, is designed from the targeted EST sequence in the database; the second primer, the arbitrary primer, is an arbitrary sequence with either an AT-or GC-rich core to anneal with an intron or exon, respectively. PCR amplification is run for the first 5 cycles with an annealing temperature of 35°C, followed by 35 cycles with an annealing temperature of 50°C. For different plant species, each PCR reaction can generate as many as 50 scorable fragments with sizes ranging from 50–900 bp when separated on a 6.5% polyacrylamide sequencing gel. The TRAP technique should be useful in genotyping germplasm collections and in tagging genes governing desirable agronomic traits of crop plants.     

A New PCR Method: One Primer Amplification of PCR-CTPP Products

Polymerase chain reaction with confronting two-pair primers (PCR-CTPP) is a convenient method for genotyping single nucleotide polymorphisms, saving time, and costs. It uses four primers for PCR; F1 and R1 for one allele, and F2 and R2 for the other allele, by which three different sizes of DNA are amplified; between F1 and R1, between F2 and R2, and between F1 and R2. To date, we have applied PCR-CTPP successfully for genotyping more than 60 polymorphisms. However, it is not rare that PCR does not produce balanced amplification of allele specific bands. Accordingly, the method was modified by attaching a common sequence at the 5' end of two-pair primers and adding another primer with the common sequence in PCR, in total five different primers in a tube for PCR. The modification allowed one primer amplification for the products of initial PCR with confronting two-pair primers, named as one primer amplification of PCR-CTPP products (OPA-CTPP). This article demonstrates an example for an A/G polymorphism of paraoxonase 1 (PON1) Gln192Arg (rs662). PCR-CTPP failed clear genotyping for the polymorphism, while OPA-CTPP successfully produced PCR products corresponding to the allele. The present example indicated that the OPA-CTPP would be useful in the case that PCR-CTPP failed to produce balanced PCR products specific to each allele.     

Efficient One-Step Fusion PCR Based on Dual-Asymmetric Primers and Two-Step Annealing

Gene splicing by fusion PCR is a versatile and widely used methodology, especially in synthetic biology. We here describe a rapid method for splicing two fragments by one-round fusion PCR with a dual-asymmetric primers and two-step annealing (ODT) method. During the process, the asymmetric intermediate fragments were generated in the early stage. Thereafter, they were hybridized in the subsequent cycles to serve as template for the target full-length product. The process parameters such as primer ratio, elongation temperature and cycle numbers were optimized. In addition, the fusion products produced with this method were successfully applied in seamless genome editing. The fusion of two fragments by this method takes less than 0.5 day. The method is expected to facilitate various kinds of complex genetic engineering projects with enhanced efficiency.     

Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.     

Antisense PCR: A simple and robust method for performing nested single-tube PCR

To overcome the disadvantages of two-round nested PCR, we developed a simple and robust closed single-tube nested PCR method (antisense PCR). The method uses antisense oligonucleotides that carry a 5′ tag and that can potentially hybridize to the 3′ ends of the outer primers, depending on the annealing temperature. During initial cycles, which are performed at a high annealing temperature, the antisense oligonucleotides do not hybridize and amplification is directed by the outer primers. During later cycles, for which the annealing temperature is decreased, the outer primers hybridize to the antisense oligonucleotides, extend to produce sequences that are mismatched to the amplicon templates, and consequently become inactivated, whereas the inner primers hybridize to the amplicon templates and continue amplification. Antisense quantitative PCR (qPCR) was compared with one-round qPCR for real-time amplification of four PCR targets (BCR, APC, N-RAS, and a rearranged IGH gene). It had equal amplification efficiency but produced much less nonspecific amplification. Antisense PCR enables both endpoint detection and real-time quantification. It can substitute for two-round nested PCRs but may also be applicable to instances of one-round PCR in which nonspecificity is a problem.     

在单个PCR管内快捷完成定点突变

采用大引物方法,利用质粒多克隆位点两侧的普通测序引物作为旁侧引物,在单个PCR管内,经2个步骤共34个循环进行定点突变. 该方法通过优化模板和引物的量达到降低PCR循环次数, 通过加入10个在68℃复性条件下的PCR循环达到增加突变效率而无需胶纯化.本方法达到平均62%的突变效率,而且全长扩增产物的产率很高.     

Multilocus markers for mouse genome analysis: PCR amplification based on single primers of arbitrary nucleotide sequence

Polymerase chain reaction (PCR) based on single primers of arbitrary nucleotide sequence provides a powerful marker system for genome analysis because each primer amplifies multiple products, and cloning, sequencing, and hybridization are not required. We have evaluated this typing system for the mouse by identifying optimal PCR conditions; characterizing effects of GC content, primer length, and multiplexed primers; demonstrating considerable variation among a panel of inbred strains; and establishing linkage for several products. Mg²⁺, primer, template, and annealing conditions were identified that optimized the number and resolution of amplified products. Primers with 40% GC content failed to amplify products readily, primers with 50% GC content resulted in reasonable amplification, and primers with 60% GC content gave the largest number of well-resolved products. Longer primers did not necessarily amplify more products than shorter primers of the same proportional GC content. Multiplexed primers yielded more products than either primer alone and usually revealed novel variants. A strain survey showed that most strains could be readily distinguished with a modest number of primers. Finally, linkage for seven products was established on five chromosomes. These characteristics establish single primer PCR as a powerful method for mouse genome analysis.     

Open reading frame analysis by selective PCR-mediated deletion mutagenesis

Recently, we demonstrated that a nested set of DNA fragments can be obtained by using one specific primer and one semirandom primer in a polymerase chain reaction (PCR). We now describe a strategy for selective deletion mutagenesis that is based on this observation. The gene of interest is cloned as a fusion construct with a selectable marker in a small vector, allowing for PCR amplification of the entire recombinant plasmid. The specific primer is complementary to the vector sequence beyond the gene of interest and is oriented downstream. The 3′ end of the semirandom primer is complementary to a triplet (GAT) that is scattered over the entire open reading frame (ORF). It is shown by nucleotide sequence analysis that deletion mutants result exclusively from annealing of the semirandom primer at different GAT triplets. PCR products resulting fro from annealing to GAT triplets elsewhere in the plasmid are counterselected by the need for replication functions and for the expression of the selectable marker. This technique is demonstrated on the Saccharomyces cerevisiae ORF YCL56C.     

白菜的EST标记及其对油菜的通用性

根据白菜的表达序列标签,设计了28对引物。在对引物、dNTP、MgCl2的浓度及退火温度等参数进行测试后,建立了合适的PCR反应体系。在此反应体系下,以构建EST的白菜自交系A的DNA为模板,对设计的引物进行了筛选,发现有18对引物能对白菜DNA扩增出产物。用筛选出来的引物分别对17个白菜类品种进行PCR扩增,用琼脂糖凝胶电泳分析其产物的多态性,发现10对引物有多态性,这占了筛选引物的55.6%。为检测白菜EST标记的通用性,进一步利用设计的引物对不同油菜品种的DNA进行PCR扩增。在检测的28对引物中,共有24对引物能扩增出产物,占引物总数的85.7%,显示多态性的引物为18对,占引物总数的64.3%.。在对白菜DNA能扩增出产物的18对引物中,对油菜完全可用,且有13对引物产生多态性。而在那些对白菜未扩增出产物的10对引物中,也有6对能扩增出产物,其中5对显示多态性。文章研究结果证明,通过EST建立分子标记是可行的,而且这种标记对近缘物种是可通用的。     

Rapid amplification of genomic ends (RAGE) as a simple method to clone flanking genomic DNA

This report describes the amplification of upstream genomic sequences using the polymerase chain reaction (PCR) based solely on downstream DNA information from a cDNA clone. In this novel and rapid technique, genomic DNA (gDNA) is first incubated with a restriction enzyme that recognizes a site within the 5′ end of a gene, followed by denaturation and polyadenylation of its free 3′ ends with terminal transferase. The modified gDNA is then used as template for PCR using a gene-specific primer complementary to a sequence in the 3′ end of its cDNA and an anchored deoxyoligothymidine primer. A second round of PCR is then performed with a second, nested gene-specific primer and the anchor sequence primer. The resulting PCR product is cloned and its sequence determined. Three independent plant genomic clones were isolated using this method that exhibited complete sequence identity to their cDNAs and to the primers used in the amplification.     

Universal primers for fluorescent labelling of PCR fragments--an efficient and cost-effective approach to genotyping by fluorescence

Directly labelling locus‐specific primers for microsatellite analysis is expensive and a common limitation to small‐budget molecular ecology projects. More cost‐effective end‐labelling of PCR products can be achieved through a three primer PCR approach, involving a fluorescently labelled universal primer in combination with modified locus‐specific primers with 5′ universal primer sequence tails. This technique has been widely used but has been limited largely due to a lack of available universal primers suitable for co‐amplifying large numbers of size overlapping loci and without requiring locus‐specific PCR conditions to be modified. In this study, we report a suite of four high‐performance universal primers that can be employed in a three primer PCR approach for efficient and cost‐effective fluorescent end‐labelling of PCR fragments. Amplification efficiency is maximized owing to high universal primer Tm values (approximately 60+ °C) that enhance primer versatility and enable higher annealing temperatures to be employed compared with commonly used universal primers such as M13. We demonstrate that these universal primers can be combined with multiple fluorophores to co‐amplify multiple loci efficiently via multiplex PCR. This method provides a level of multiplexing and PCR efficiency similar to microsatellite fluorescent detection assays using directly labelled primers while dramatically reducing project costs. Primer performance is tested using several alternative PCR strategies that involve both single and multiple fluorophores in single and multiplex PCR across a wide range of taxa.     

Reliable fusion PCR using Taq polymerases and pGEM-T easy vectors

We describe a reliable method for the production of fusion PCR products that can be used to transform the wild-type bacteria to replace target genes for mutagenesis studies. The relevant gene fragments and selective cassette are first amplified separately by PCR using primers that produce overlapping ends. As economic Taq DNA polymerase is disappointed in producing overlap ends due to adding an extra 3′-end ‘A’ base which potentially blocks the successful fusion of the amplified fragments, we use a new primer design strategy to overcome this disadvantage by introducing an additional ‘A’ base in the overlap primers. The amplified gene fragments were then separately cloned into a pGEM-T easy vector and re-amplified with the aid of a universal primer T7/SP6. This procedure enables performing nested PCR with the outmost primers in the fusion reaction to reliably splice the gene fragments into a single molecule with all sequences in the desired order.     

Optimization of PCR conditions to amplify Cyt b, COI and 12S rRNA gene fragments of Malayan gaur (Bos gaurus hubbacki) mtDNA

PCR has been extensively used for amplification of DNA sequences. We conducted a study to obtain the best amplification conditions for cytochrome b (Cyt b), cytochrome c oxidase I (COI) and 12S rRNA (12S) gene fragments of Malayan gaur mtDNA. DNA from seven Malayan gaur samples were extracted for PCR amplification. Various trials and combinations were tested to determine the best conditions of PCR mixture and profile to obtain the best PCR products for sequencing purposes. Four selected target factors for enhancing PCR, annealing temperature, concentration of primer pairs, amount of Taq polymerase, and PCR cycle duration, were optimized by keeping the amount of DNA template (50 ng/μL) and concentration of PCR buffer (1X), MgCl(2) (2.5 mM) and dNTP mixture (200 μM each) constant. All genes were successfully amplified, giving the correct fragment lengths, as assigned for both forward and reverse primers. The optimal conditions were determined to be: 0.1 μM primers for Cyt b and COI, 0.3 μM primers for 12S, 1 U Taq polymerase for all genes, 30 s of both denaturation and annealing cycles for Cyt b, 1 min of both stages for 12S and COI and annealing temperature of 58.4 ° C for Cyt b, 56.1 ° C for 12S and 51.3 ° C for COI. PCR products obtained under these conditions produced excellent DNA sequences.     

起始密码子区域相关序列多态性的开发及在苜蓿遗传多样性上的应用

目前广泛使用的基于PCR基础的分子标记多为扩增非编码区域,或是随机基因组中扩增,在QTL定位中得到的位点一般与目标性状基因距离较远,我们开发了一个新的基于启动子序列目的基因型分子标记技术——启动子区域相关序列多态性（SCRP）,试图使标记能够更为准确的反映不同品种的遗传基础。它利用启动子位置保守一致序列 （“Kozak”序列） 作为其上游引物,利用内含子富含“AATT”的特性,作为核心序列设计下游引物,上下游引物均为18bp,引物间通过组合配对的方式作为扩增引物对。设计了14条上游引物和10条下游引物,共140对引物组合,对34个苜蓿品种进行扩增,研究了34个苜蓿的遗传多样性。每个PCR反应产生3~16个50~2000bp的条带,结果表明该标记简单、可靠、具有较高多态性,并且扩增区域为一种目的基因型分子标记,在种质资源研究中具有重要价值。