Ligand-linked structural changes in the Escherichia coli biotin repressor: the significance of surface loops for binding and allostery.

The Escherichia coli repressor of biotin biosynthesis (BirA) is an allosteric site-specific DNA-binding protein. BirA catalyzes synthesis of biotinyl-5'-AMP from substrates biotin and ATP and the adenylate serves as the positive allosteric effector in binding of the repressor to the biotin operator sequence. Although a three-dimensional structure of the apo-repressor has been determined by X-ray crystallographic techniques, no structures of any ligand-bound forms of the repressor are yet available. Results of previously published solution studies are consistent with the occurrence of conformational changes in the protein concomitant with ligand binding. In this work the hydroxyl radical footprinting technique has been used to probe changes in reactivity of the peptide backbone of BirA that accompany ligand binding. Results of these studies indicate that binding of biotin to the protein results in protection of regions of the central domain in the vicinity of the active site and the C-terminal domain from chemical cleavage. Biotin-linked changes in reactivity constitute a subset of those linked to adenylate binding. Binding of both bio-5'-AMP and biotin operator DNA suppresses cleavage at additional sites in the amino and carboxy-terminal domains of the protein. Varying degrees of protection of the five surface loops on BirA from hydroxyl radical-mediated cleavage are observed in all complexes. These results implicate the C-terminal domain of BirA, for which no function has previously been known, in small ligand and site-specific DNA binding and highlight the significance of surface loops, some of which are disordered in the apoBirA structure, for ligand binding and transmission of allosteric information in the protein.     

Multiple disordered loops function in corepressor-induced dimerization of the biotin repressor

Cooperative association of the Escherichia coli biotin repressor with the biotin operator is allosterically activated by binding of the corepressor, bio-5'-AMP. The corepressor function of the adenylate is due, in part, to its ability to induce repressor dimerization. Since a high-resolution structure of only the apo or unliganded repressor is currently available, the location of the dimerization interface on the protein structure is not known. Here, five mutants in the corepressor-binding domain of the repressor have been analyzed with respect to their DNA-binding and self-assembly properties. Results of these studies reveal that four of the mutant proteins exhibit defects in DNA binding. These same proteins are compromised in self-assembly. Furthermore, in the three-dimensional structure of the apo protein the mutations all lie in partially disordered surface loops, one of which is known to participate directly in corepressor binding. These results suggest that multiple disordered surface loops function in the corepressor-induced dimerization required for sequence-specific DNA binding by the biotin repressor.     

Co-repressor induced order and biotin repressor dimerization: a case for divergent followed by convergent evolution

BirA catalyzes the adenylation and subsequent covalent attachment of biotin to the biotin carboxyl carrier protein (BCCP). In the absence of apo-BCCP, biotin-5'-AMP acts as a co-repressor that induces BirA dimerization and binding to the bio operator to repress biotin biosynthesis. The crystal structures of apo-BirA, and BirA in complex with biotin have been reported. We here describe the 2.8A resolution crystal structure of BirA in complex with the co-repressor analog biotinol-5'-AMP. It was previously shown that the structure of apo-BirA is monomeric and that binding of biotin weakly induces a dimeric structure in which three disordered surface loops become organized to form the dimer interface. The structure of the co-repressor complex is also a dimer, clearly related to the BirA.biotin structure, but with several significant conformational changes. A hitherto disordered "adenylate binding loop" forms a well-defined structure covering the co-repressor. The co-repressor buttresses the dimer interface, resulting in improved packing and a 12 degrees change in the hinge-bending angle along the dimer interface relative to the BirA.biotin structure. This helps explain why the binding of the co-repressor is necessary to optimize the binding of BirA to the bioO operator. The structure reveals an unexpected use of the nucleotide-binding motif GXGXXG in binding adenylate and controlling the repressor function. Finally, based on structural analysis we propose that the class of adenylating enzymes represented by BirA, lipoate protein ligase and class II tRNA synthetases diverged early and were selected based on their ability to sequester co-factors or amino acid residues, and adenylation activity arose independently through functional convergence.     

Coupling of protein assembly and DNA binding: biotin repressor dimerization precedes biotin operator binding

The kinetics of coupling of protein dimerization and DNA binding have been investigated in the biotin repressor system. Two repressor monomers bind to the 40 base-pair biotin operator sequence. In previous analyses of equilibrium-binding data the weak dimerization of the repressor has justified using a model in which two protein monomers bind cooperatively to the operator site. Here, rapid kinetic methods have been used to directly determine the binding mechanism. Results of rapid-mixing DNaseI footprinting measurements of association of the repressor with operator indicate that the binding process involves at least two steps. Results of measurements of the unimolecular dissociation of the complex reveal a half-life of approximately 400 seconds. Analysis of the data using a combination of simulation and global non-linear least-squares analysis provides support for a binding model in which a preformed repressor dimer associates with the biotin operator. This kinetic model is consistent with the previously proposed model for regulation of the functional switch in the repressor from enzyme to site-specific DNA-binding protein.     

Sequence–function relationships in folding upon binding

Folding coupled to binding is ubiquitous in biology. Nevertheless, the relationship of sequence to function for protein segments that undergo coupled binding and folding remains to be determined. Specifically, it is not known if the well-established rules that govern protein folding and stability are relevant to ligand-linked folding transitions. Upon small ligand biotinoyl-5′-AMP (bio-5′-AMP) binding the Escherichia coli protein BirA undergoes a disorder-to-order transition that results in formation of a network of packed hydrophobic side chains. Ligand binding is also allosterically coupled to protein association, with bio-5′-AMP binding enhancing the dimerization free energy by −4.0 kcal/mol. Previous studies indicated that single alanine replacements in a three residue hydrophobic cluster that contributes to the larger network disrupt cluster formation, ligand binding, and allosteric activation of protein association. In this work, combined equilibrium and kinetic measurements of BirA variants with alanine substitutions in the entire hydrophobic network reveal large functional perturbations resulting from any single substitution and highly non-additive effects of multiple substitutions. These substitutions also disrupt ligand-linked folding. The combined results suggest that, analogous to protein folding, functional disorder-to-order linked to binding requires optimal packing of the relevant hydrophobic side chains that contribute to the transition. The potential for many combinations of residues to satisfy this requirement implies that, although functionally important, segments of homologous proteins that undergo folding linked to binding can exhibit sequence divergence.     

Binding specificity and the ligand dissociation process in the E. coli biotin holoenzyme synthetase

The binding of the Escherichia coli biotin holoenzyme synthetase to the two ligands, biotin and bio-5'-AMP, is coupled to disorder-to-order transitions in the protein. In the structure of the biotin complex, a "glycine-rich" loop that is disordered in the apo-enzyme is folded over the ligand. Mutations in three residues in this loop result in significant changes in the affinity of the enzyme for both biotin and bio-5'-AMP. The kinetic basis of these losses in the affinity resides primarily in changes in the unimolecular rates of dissociation of the complexes. In this work, isothermal titration calorimetry has been employed to examine the detailed thermodynamics of binding of three loop mutants to biotin and bio-5'-AMP. The energetic features of dissociation of the protein*ligand complexes also have been probed by measuring the temperature dependencies of the unimolecular dissociation rates. Analysis of the data using the Eyring formalism yielded entropic and enthalpic contributions to the energetic barrier to dissociation. The thermodynamic results coupled with the known structures of the apo-enzyme and biotin complex have been used to formulate a model for progression from the ground-state complex to the transition state in biotin dissociation. In this model, the transition-state is characterized by both partial disruption of noncovalent bonds and acquisition of some of the disorder that characterizes the glycine-rich loop in the absence of ligand.     

The C-terminal domain of biotin protein ligase from E. coli is required for catalytic activity

Biotin protein ligase of Escherichia coli, the BirA protein, catalyses the covalent attachment of the biotin prosthetic group to a specific lysine of the biotin carboxyl carrier protein (BCCP) subunit of acetyl-CoA carboxylase. BirA also functions to repress the biotin biosynthetic operon and synthesizes its own corepressor, biotinyl-5'-AMP, the catalytic intermediate in the biotinylation reaction. We have previously identified two charge substitution mutants in BCCP, E119K, and E147K that are poorly biotinylated by BirA. Here we used site-directed mutagenesis to investigate residues in BirA that may interact with E119 or E147 in BCCP. None of the complementary charge substitution mutations at selected residues in BirA restored activity to wild-type levels when assayed with our BCCP mutant substrates. However, a BirA variant, in which K277 of the C-terminal domain was substituted with Glu, had significantly higher activity with E119K BCCP than did wild-type BirA. No function has been identified previously for the BirA C-terminal domain, which is distinct from the central domain thought to contain the ATP binding site and is known to contain the biotin binding site. Kinetic analysis of several purified mutant enzymes indicated that a single amino acid substitution within the C-terminal domain (R317E) and located some distance from the presumptive ATP binding site resulted in a 25-fold decrease in the affinity for ATP. Our data indicate that the C-terminal domain of BirA is essential for the catalytic activity of the enzyme and contributes to the interaction with ATP and the protein substrate, the BCCP biotin domain.     

Ligand specificity of group I biotin protein ligase of Mycobacterium tuberculosis

Background

Fatty acids are indispensable constituents of mycolic acids that impart toughness & permeability barrier to the cell envelope of M. tuberculosis. Biotin is an essential co-factor for acetyl-CoA carboxylase (ACC) the enzyme involved in the synthesis of malonyl-CoA, a committed precursor, needed for fatty acid synthesis. Biotin carboxyl carrier protein (BCCP) provides the co-factor for catalytic activity of ACC.

Methodology/Principal Findings

BPL/BirA (Biotin Protein Ligase), and its substrate, biotin carboxyl carrier protein (BCCP) of Mycobacterium tuberculosis (Mt) were cloned and expressed in E. coli BL21. In contrast to EcBirA and PhBPL, the ∼29.5 kDa MtBPL exists as a monomer in native, biotin and bio-5′AMP liganded forms. This was confirmed by molecular weight profiling by gel filtration on Superdex S-200 and Dynamic Light Scattering (DLS). Computational docking of biotin and bio-5′AMP to MtBPL show that adenylation alters the contact residues for biotin. MtBPL forms 11 H-bonds with biotin, relative to 35 with bio-5′AMP. Docking simulations also suggest that bio-5′AMP hydrogen bonds to the conserved ‘GRGRRG’ sequence but not biotin. The enzyme catalyzed transfer of biotin to BCCP was confirmed by incorporation of radioactive biotin and by Avidin blot. The K_m for BCCP was ∼5.2 µM and ∼420 nM for biotin. MtBPL has low affinity (K_b = 1.06×10⁻⁶ M) for biotin relative to EcBirA but their K_m are almost comparable suggesting that while the major function of MtBPL is biotinylation of BCCP, tight binding of biotin/bio-5′AMP by EcBirA is channeled for its repressor activity.

Conclusions/Significance

These studies thus open up avenues for understanding the unique features of MtBPL and the role it plays in biotin utilization in M. tuberculosis.     

Allosteric signaling in the biotin repressor occurs via local folding coupled to global dampening of protein dynamics

The biotin repressor is an allosterically regulated, site-specific DNA-binding protein. Binding of the small ligand bio-5′-AMP activates repressor dimerization, which is a prerequisite to DNA binding. Multiple disorder-to-order transitions, some of which are known to be important for the functional allosteric response, occur in the vicinity of the ligand-binding site concomitant with effector binding to the repressor monomer. In this work, the extent to which these local changes are coupled to additional changes in the structure/dynamics of the repressor was investigated using hydrogen/deuterium exchange coupled to mass spectrometry. Measurements were performed on the apo-protein and on complexes of the protein bound to four different effectors that elicit a range of thermodynamic responses in the repressor. Global exchange measurements indicate that binding of any effector to the intact protein is accompanied by protection from exchange. Mass spectrometric analysis of pepsin-cleavage products generated from the exchanged complexes reveals that the protection is distributed throughout the protein. Furthermore, the magnitude of the level of protection in each peptide from hydrogen/deuterium exchange correlates with the magnitude of the functional allosteric response elicited by a ligand. These results indicate that local structural changes in the binding site that occur concomitant with effector binding nucleate global dampening of dynamics. Moreover, the magnitude of dampening of repressor dynamics tracks with the magnitude of the functional response to effector binding.     

Overproduction and rapid purification of the biotin operon repressor from Escherichia coli

The Escherichia coli biotin operon repressor protein (BirA) has been overexpressed at the level of 0.5-1% of the total cellular protein from the plasmid pMBR10. Four lines of evidence demonstrated that authentic BirA protein was produced. First, birA plasmids complemented birA mutants for both the repressor and biotin holoenzyme synthetase activities of BirA. Second, biotin holoenzyme synthase activity was increased in strains containing the overproducing plasmids. Third, deletion of sequences flanking the birA gene did not alter production of the 35-kDa BirA protein, but insertion of oligonucleotide linkers within the birA coding region abolished it. Fourth, the 35-kDa protein copurified with the biotin binding activity normally associated with BirA. The birA protein has been purified to homogeneity in a three-step process involving chromatography on phosphocellulose and hydroxyapatite columns.