β-Diiminatolanthanoid(III) halides revisited

The crystalline compounds [LnCl₂(L)(thf)₂] [Ln = Ce (1), Tb (2), Yb (3)], [NdI₂(L)(thf)₂] (4), [LnCl(L′)₂] [Ln = Tb (5), Yb (6) (a known compound)] and [YbCl(L′′)(μ-Cl)₂Li(OEt₂)₂] (7) have been prepared [L = {N(C₆H₃Prⁱ₂-2,6)C(H)}₂CPh, L′ = {N(SiMe₃)C(Ph)}₂CH, L′′ = {N(SiMe₃)C(C₆H₄Ph-4)}₂CH]. The X-ray molecular structures of 2-7 have been established; in each, the monoanionic ligand L, L′ or L′′ is N,N′-chelating and essentially π-delocalised. Each of 1-7 was prepared from the appropriate LnCl₃, or for 4 [NdI₃(thf)₂], and an equivalent portion of the appropriate alkali metal [Li for 7, Na for 2, 3 and 5, or K for 1, 4 and 6] β-diiminate in thf; the isolation of exclusively 5 and 6 (rather than the L′ analogues of 2 or 3) is noteworthy, as is the structure of 7 which has no precedent in Group 3 or 4f metal β-diiminato chemistry.     

Synthesis and exploratory coordination chemistry of the new ditertiary carbinamine ligand 2,6-bis(α-aminoisopropyl)pyridine

The new pyridine-based N∩N∩N tridentate ligand 2,6-C₅H₃N(CMe₂NH₂)₂ (1) was synthesized by the treatment of 2,6-pyridinedicarbonitrile with an excess of the organocerium reagent in situ generated from CeCl₃ and methyllithium in THF. The reaction of 1 with [RuCl₂(PPh₃)₃] in THF at ambient conditions afforded (OC-6-23)-[RuCl{2,6-C₅H₃N(CMe₂NH₂)₂}(PPh₃)₂]Cl (2). The corresponding dimethyl sulfoxide complex [RuCl{2,6-C₅H₃N(CMe₂NH₂)₂}{S(O)Me₂}₂]Cl (3) was isolated as a mixture of the (OC-6-23) and (OC-6-32) stereoisomers 3a and 3b from the reaction between 1 and (OC-6-22)-[RuCl₂{S(O)Me₂}₃(OSMe₂)] in toluene at 80 °C. A prolonged interaction in toluene at reflux temperature gave isomerically pure 3a. The metal trichloride hydrates MCl₃ · xH₂O (M = Ru, Rh, Ir; x ≅ 2-4) produced mer-[RuCl₃{2,6-C₅H₃N(CMe₂NH₂)₂}] (M = Ru: 4; Rh: 5; Ir: 6), when combined with 1 in refluxing ethanol. The crystal structures of the following compounds were determined: ligand 1 and complexes 2-5 as addition compounds 2 · CH₂Cl₂, 3a · C₇H₈, 4 · EtOH and .     

Synthesis, structure, sorption and magnetic properties of Ni(II) and Cu(II) complexes with thiosemicarbazone of 2-hydroxybenzaldehyde, bridged by 4,4′-bipyridine

(ML)₂(bipy) complexes (LH₂ = thiosemicarbazone of 2-hydroxybenzaldehyde, bipy = 4,4′-bipyridine, M = Ni(II), 1, or Cu(II), 2) were synthesized and characterized by X-ray crystallography. Compound 1 possessed porous structure due to peculiarities of crystal packing, whereas 2 formed infinite zig-zag chains with dense non-porous packing. It was shown that 1 absorbed 0.013 cm³/g of methanol vapor in two steps. Complex 1 was diamagnetic; for 2, the dependency of χ versus T could be interpreted by Bleaney-Bowers expression in 20-300 K temperature range (J = −6.8 cm⁻¹, g = 2.07).     

Synthesis, structure, DNA binding and cleavage properties of ternary amino acid Schiff base-phen/bipy Cu(II) complexes

Ternary Cu(II) complexes [Cu(II)(saltrp)(B)] (1,2), (saltrp = salicylidene tryptophan, B = 1,10 phenathroline (1) or 2,2′ bipyridine (2)) were synthesized and characterized. Complex 2 was structurally characterized by single crystal X-ray crystallography. The molecular structure shows a distorted square pyramidal coordination geometry (CuN₃O₂) in which the ONO donor Schiff base is bonded to the Cu(II) in the basal plane. The N,N donor heterocyclic base displays an axial-equatorial binding mode. CT-DNA binding studies revealed that the complexes show good binding propensity (Intrinsic binding constant, K_b = 3.32 × 10⁵ M⁻¹ for 1 and K_b = 3.10 × 10⁵ M⁻¹ for 2). The catalytic role of these complexes in the oxidative and hydrolytic cleavage of DNA was studied in detail. Complex 1 binds and cleaves DNA more efficiently as compared to 2. From the kinetic experiments, rate constants for the hydrolysis of phosphodiester bond of DNA backbone were determined as 1.94 h⁻¹ and 1.05 h⁻¹ for 1 and 2 respectively. It amounts to (2.93-5.41) × 10⁷ fold rate enhancement compared to uncatalyzed double stranded DNA, which is impressive as compared to related Cu(II) Schiff base complexes.     

Nickel(II) complexes bearing pyrazolylimine ligands: Synthesis, characterization, and catalytic properties for ethylene oligomerization

Four phenyl-substituted pyrazolylimine ligands 2-(C₃HN₂Me₂-3,5)(C(Ph)N(4-R₂C₆H₂(R₁)₂-2,6)) (L1: R₁ = ⁱPr, R₂ = H; L2: R₁ = H, R₂ = NO₂; L3: R₁ = R₂ = H; L4: R₁ = H, R₂ = OCH₃) were synthesized. The influences of steric bulk and electronic effect of pyrazolylimine ligands on the structures of their corresponding nickel complexes were investigated. Ligands with more bulky and electron withdrawing substituents on N-phenyl ring produced four-coordinate nickel complexes (2-(C₃HN₂Me₂-3,5))(C(Ph)(4-R₂C₆H₂(R₁)₂-2,6)NiBr₂ (1, R₁ = ⁱPr, R₂ = H; 2, R₁ = H, R₂ = NO₂)), whereas the ligands with less bulky and electron donating substituents on N-phenyl ring formed bis-pyrazolylimine dinickel tetrahalides (bis-2-(C₃HN₂Me₂-3,5))(C(Ph)N(4-R₂C₆H₂ (R₁)₂-2,6)Ni₂Br₄ (3, R₁ = R₂ = H; 4, R₁ = H, R₂ = OCH₃)) and six-coordinate nickel dihalides (bis-2-(C₃HN₂Me₂-3,5))(C(Ph)N(4-R₂C₆H₂(R₁)₂-2,6) NiBr₂ (5, R₁ = R₂ = H;6, R₁ = H, R₂ = OCH₃)). The solid-state structures of complexes 1, 4 and 5 have been confirmed by X-ray single-crystal analyses. Activated by methylaluminoxane (MAO), complexes 1, 2, 5 and 6 showed moderate to high activity for ethylene oligomerization, and complex 5 revealed the highest activity up to 8.96 × 10⁵ g oligomer/(mol Ni · h). The proportions of resultant oligomers were mainly C4-C8 and a little C10-C14 determined by gas chromatography/mass spectrometry.     

Synthesis, structures and ligating properties of 2,6-bis(phosphino)thiophenol derivatives

New t-butyl-aryl thioethers where the aryl group is 2,6-bis(phosphino)phenyl have been synthesized. The syntheses were completed via sequential ortho-lithiations of t-butylphenylsulfide, followed by chlorophosphine (ClPR₂) quenches; symmetric (2,6-bis(diphenylphosphino)phenyl, (4a)) and unsymmetric (2-diisopropylphosphino-6-diphenylphosphino)phenyl, (4b) aryl groups were obtained. Treatment of 4a with Li or Na naphthalenide yielded 2,6-bis(diphenylphosphino)thiophenol 5. Reactions of 4a or 5 with NiCl₂ · 6H₂O yielded nickel bis(phosphinothiophenolate) 6. Compounds 4a,b, 5 and 6 were characterized by ¹H and ³¹P NMR, and by mass-spectrometry. In addition, 4a, 5 and 6 were characterized by single crystal X-ray diffraction methods.     

Synthesis, and characterization of cobalt(III) complexes with Schiff bases derived from 2-hydroxynaphthaldehyde, (naph)2dien and (naph)2dpt, and monodentate amine ligands: Crystal structure, spectral and redox properties

Two series of complexes of the type [Co^III{(naph)₂dien}(amine)]BPh₄ {(naph)₂dien = bis-(2-hydroxy-1-naphthaldimine)-N-diethylenetriamine dianion, and amine = piperidine (pprdn) (1), pyrrolidine (prldn) (2), pyridine (py) (3), N-methylimidazole (N-MeIm) (4)}, and [Co^III{(naph)₂dpt}(amine)]BPh₄ {(naph)₂dpt = bis-(2-hydroxy-1-naphthaldimine)-N-dipropylenetriamine dianion, and amine = piperidine (pprdn) (5), 3-methylpyridine (3-Mepy) (6)} have been synthesized and characterized by elemental analyses, IR, UV-Vis, and ¹H NMR spectroscopy. The crystal structures of (2) and (6) have been determined by X-ray diffraction. The redox potentials of the central cobalt ion show a relatively good correlation with the σ-donor ability of the axial ligands. The spectroscopic and electrochemical properties of these complexes are also influenced by the mutual steric hindrance between the pentadentate Schiff base and the ancillary ligands.     

Gold(I) and silver(I) complexes of 2,3-bis(diphenylphosphino)maleic acid: Structural studies and antitumour activity

The 2:1 and 1:2 adducts of Au(I) and 1:2 adducts of Ag(I) with the diphosphine 2,3-bis(diphenylphosphino)maleic acid (dpmaa) have been prepared in high yields. Crystal structures have been determined for the neutral digold complex (AuCl)₂(dpmaa) · 2thf (1) and the bis-chelated complex [Au(dpmaa)₂]Cl · H₂O · CH₃OH (2). For 1, conformational rigidity imposed by the ethylenic bridge facilitates the formation of short intramolecular Au-Au contacts with no evidence of similar intermolecular contacts. Complex 2 crystallizes with [Au(dpmaa)₂]⁺ cations hydrogen bonded through the carboxyl groups to a water molecule and chloride anion to form a H-bonded chain along the a axis. ³¹P NMR titration of 1 with dpmaa in acetone shows conversion to 2 at Au:P-P ratios less than 1:1 indicating similar high thermodynamic and kinetic stabilities to other bis-chelated [Au(P-P)₂]⁺ complexes containing 5- or 6-membered chelate rings. The ionic Au(I) complex 2 and the analogous Ag(I) complex [Ag(dpmma)₂]NO₃ (3) are highly water soluble. The in vitro cytotoxic activity of 2 was assessed against eight different cell lines and no significant activity was found. The solubility properties and solution behaviour of the complexes are compared to the analogous 1,2-bis(diphenylphosphino)ethane (dppe) complexes and the potential significance of these results to the antitumour properties of chelated 1:2 Au(I)diphosphine complexes are discussed.     

Palladium(II), platinum(II), ruthenium(II) and mercury(II) complexes of potentially tridentate Schiff base ligands of (E, N, O) type (E = S, Se, Te): Synthesis, crystal structures and applications in Heck and Suzuki coupling reactions

Schiff bases of 2-hydroxybenzophenone (HBP) (C₆H₅)(2-HOC₆H₄)CN(CH₂)_nEAr (L1/L2: E = S, Ar = Ph, n = 2/3; L3/L4: E = Se, Ar = Ph, n = 2/3; L5/L6: E = Te, Ar = 4-MeOC₆H₄, n = 2/3) and their complexes [PdCl(L-H)] (L = L1−L6; 1, 2, 3, 5, 7, 11), [PtCl(L3-H/L5-H)] (4/8), [PtCl₂(L4/L6)₂] (6/12), [(p-cymene)RuCl(L5/L6)]Cl (9/13) and [HgBr₂(L5/L6)₂] (10/14) have been synthesized and characterized by proton, carbon-13, selenium-77 and tellurium-125 NMR, IR and mass spectra. Single crystal structures of L1, 1, 3, 4, 5 and 7 were solved. The Pd-E bond distances (Å): 2.2563(6) (E = S), 2.3575(6)−2.392(2) (E = Se); 2.5117(5)−2.5198(5) (E = Te) are near the lower end of the bond length range known for them. The Pt-Se bond length, 2.3470(8) Å, is also closer to the short values reported so far. The Heck and Suzuki reaction were carried out using complexes 1, 3, 5 and 7 as catalysts under aerobic condition. The percentage yields for trans product in Heck reaction were found upto 85%.     

Calix[4]arene supported group 5 imido complexes

The reaction of imidoyl chlorides [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and calix[4]arene methyl ether H₃Mecalix unexpectedly leads to the formation of the structurally characterized vanadium (IV) complex [VCl(Mecalix)] (4). Calix[4]arene methyl ether stabilized imido complexes of the type [V(NR)(Mecalix)] (R = Ph 7, Tol 8, tBu 9) were afforded from the reaction of [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and the tris(lithium) or tris(sodium) salt of the calix[4]arene ether. The lithium salt [{Li₃(Mecalix)}₂] (5) is a dimer in the solid state, in which two monomeric trianions are bridged by lithium cations. Imido complexes [M(NR)(Mecalix)] (M = Nb: R = tBu, 12, R = Tol 13, R = Mes 14, R = Dipp 15; M = Ta: R = tBu 16, R = Tol 17) (Tol = 4-C₆H₄Me, Mes = 2,6-C₆H₃Me₂; Dipp = 2,6-C₆H₃iPr₂) have been prepared from structurally characterized [NbCl₂(Mecalix)] (10) and previously known [TaCl₂(Mecalix)] (11) via reaction with two equivalents of the appropriately metallated (Li, K) primary amine. The molecular structures of 13 and 15 confirm the mononuclear nature of these complexes.     

Reactions of alkyl- and aryl(ferrocenyl)phosphines with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone

Reaction of diphenyl(ferrocenyl)phosphine (1), tri(ferrocenyl)phosphine (2) and ^tbutyl(diferrocenyl)phosphine (3) with one equivalent of 2,3-dichloro-4,5-dicyano-1,4-benzoquinone (DDQ) yields FcPPh₂ • DDQ (4), Fc₃P • DDQ (5) and Fc₂P^tBu • DDQ (6), respectively. Infrared, UV-Vis and ESR spectra of 4-6 are consistent with formation of DDQ⁻ Mössbauer spectroscopy, however, reveals that 4-6 all contain low spin Fe^II suggesting that the radical cation is ligand centered rather than iron centered.     

Cyclometalated rhodium(III) and iridium(III) complexes containing amino acids as N,O-chelates

The synthesis of bis-cyclometalated aminocarboxylato complexes [M(α-aminocarboxylato)(ptpy)₂] (M = Rh, 3, 4, 5; M = Ir, 6, 7, 8), ptpy = 2-(p-tolyl)pyridinato; aminocarboxylato = glycinato, l-alaninato, l-prolinato) from [{M(μ-Cl)(ptpy)₂}₂] (M = Rh, 1; M = Ir, 2) is described. The molecular structure of [Ir(l-alaninato)(ptpy)₂] (7) was confirmed by a single-crystal X-ray diffraction study. Compound 7 crystallized from methanol-iso-hexane in the space group P2₁. For 7 the two diastereoisomers Δ_Ir, S_C and Λ_Ir, S_C were found crystallizing twice per unit. Absorption and emission spectra were recorded. The rhodium compounds are weak yellow-green and the iridium species strong green emitters.     

Spectral properties and bio-activity of copper(II) clofibriates, part III: crystal structure of Cu(clofibriate)2(2-pyridylmethanol)2, Cu(clofibriate)2(4-pyridylmethanol)2(H2O) dihydrate, and Cu2(clofibriate)4(N,N-diethylnicotinamide)2

New copper(II) clofibriates (clof, {2-(4-chlorophenoxy)-2-methylpropionic or 2-(4-chlorophenoxy)isobutyric acid}) of composition Cu(clof)₂L₂ (where L=2-pyridylmethanol (2-pymeth) (1), N-methylnicotinamide (Menia) (4), N,N-diethylnicotinamide (Et₂nia) (5), isonicotinamide (isonia) (7) or methyl-3-pyridylcarbamate (mpc) (8)), [Cu(clof)₂(4-pymeth)₂(H₂O)] · 2H₂O (4-pymeth=4-pyridylmethanol) (2 · 2H₂O) and Cu(clof)₂L (where L=4-pymeth (3) or Et₂nia (6)) have been prepared and spectroscopically characterized. All the Cu(clof)₂L₂ compounds seem to possess distorted octahedral copper(II) stereochemistry with differing tetragonal distortions. An X-ray analysis of 1 was carried out and it featured a tetragonal-bipyramidal geometry around the copper(II) atom. X-ray analysis of 2 · 2H₂O featured a square-pyramidal geometry around copper(II) atom. Both the Cu(clof)₂L compounds seem to consist of a binuclear unit of tetracarboxylate type bridging. An X-ray analysis of 6 revealed typical binuclear paddle-wheel type structure, consisting of two copper(II) atoms in square-pyramidal geometry bridged by four carboxylate anions in the xy-plane. All complexes under study were characterized by EPR and electronic spectroscopy. The antimicrobial effects have been tested on various strains of bacteria, yeasts and filamentous fungi.     

X-ray structure and photoluminescence of copper(I) 2,6-bis(trifluoromethyl)benzoate

This report describes synthesis, X-ray crystallographic characterization, and photoluminescence of copper(I) 2,6-bis(trifluoromethyl)benzoate, [Cu(O₂C(2,6-CF₃)₂C₆H₃)] (1). Complex 1 has a polymeric structure comprised of axially bound dinuclear [Cu₂(O₂C(2,6-CF₃)₂C₆H₃)₂] units that is reminiscent of the well-known structure of copper(I) acetate, [Cu₂(O₂CMe)₂] (2). However, a close comparison of two analogues revealed a non-planarity of 1D chains and their orthogonal disposition in the crystal structure of 1 versus parallel alignment of planar chains in 2. Complex 1 exhibits green photoluminescence at ca. 560 nm upon UV-radiation (λ_ex = 350 nm) in the solid state.     

Synthesis, structure and electronic spectra of new three-coordinated copper(I) complexes with tricyclohexylphosphine and diimine ligands

Three new copper(I) complexes with tricyclohexylphosphine (PCy₃) and different diimine ligands, [Cu(phen)(PCy₃)]BF₄ (1) (phen = 1,10′-phennanthroline), [Cu(bpy)(PCy₃)₂]BF₄ (2) (bpy = 2,2′-bipyridine) and [Cu(MeO-CNN)(PCy₃)]BF₄ (3) (MeO-CNN = 6-(4-methoxyl)phenyl-2,2′-bipyridine), have been synthesized and characterized. X-ray structure reveals that complexes 1 and 3 are three-coordinated with trigonal geometry, while complex 2 adopts distorted tetrahedron geometry. Complexes 1 and 3 exhibit ligand redistribution reactions in chloromethane solution by addition of excess amount of PCy₃, in which three-coordinated 1 changes into four-coordinated [Cu(phen)(PCy₃)₂]⁺, and 3 leads to form [Cu(PCy₃)₂]BF₄ and CNN-OMe. All the three complexes display yellow ³MLCT emissions in solid state at room temperature with λ_max at 558, 564 and 582 nm for 1, 2 and 3, respectively, and red-shift to 605, 628 and 643 nm at 77 K in dichloromethane solution.     

Palladium(II) complexes obtained from 3,4-bis(cyanamido)cyclobutane-1,2-dione dianion

Three palladium(II) complexes have been synthesized, using 3,4-bis(cyanamido) cyclobutane-1,2-dione dianion (3,4-bis(cyanamido)squarate or 3,4-NCNsq²⁻): [Pd(en)(3,4-NCNsq)] · 1.5H₂O (1) (en=1,2-diaminoethane), [Pd(en)(3,4-(NC(O)NH₂)sq)] · 0.5H₂O (2) and K₃Na[Pd₂(3,4-(NCN)₂sq)₄] · 5H₂O (3). Complex 1 has been characterized by elemental analysis, IR and ¹³C NMR spectroscopies. Complexes 2 and 3 have been characterized by single-crystal X-ray diffraction. In complex 2, the unusual hydration of the cyanamido ligand was observed, it proceeds in the coordination sphere of the palladium and leads to a chelating urea squarate ligand. Complex 3 is an anionic dinuclear complex containing four bridging cyanamido squarate ligands. In complexes 2 and 3, the 3,4-NCNsq²⁻ ligand (hydrated or not) is, for the first time, coordinated to the metal atom by the two amido nitrogen atoms, either in a chelating mode (complex 2) or in a bridging mode giving a short Pd ? Pd distance of 2.8866(15) Å (complex 3). Electrochemical studies in acetonitrile and dmf solutions have been performed on complexes 1 and 3.     

Sterically crowded triazenides as novel ancillary ligands in copper chemistry

We have synthesized copper salts MN₃RR′ derived from the biphenyl- or m-terphenyl-substituted triazenes Tph₂N₃H (1a) and Dmp(Tph)N₃H (1b) (Dmp = 2,6-Mes₂C₆H₃ with Mes = 2,4,6-Me₃C₆H₂; Tph = 2-TripC₆H₄ with Trip = 2,4,6-i-Pr₃C₆H₂). The homoleptic copper triazenide [CuN₃Tph₂] (2a) was obtained in high yield from the metallation of 1a with mesityl copper in n-heptane, while the complex [CuN₃(Dmp)Tph] (2b) was generated by the same method in situ only. Reaction of 2a with triphenylphosphane gave the 2:1 adduct [CuN₃Tph₂(PPh₃)₂] (3a), regardless of the used complex/donor ratio, while reaction of 2a or 2b with a stochiometric amount of t-butylisonitrile afforded the 1:1 adducts [Tph₂N₃CuCNtBu] (4a) and [Dmp(Tph)N₃CuCNtBu] (4b). All new compounds (except 2b) have been characterized by ¹H NMR, ¹³C NMR and IR spectroscopy, elemental analysis, melting point (not 2a), and X-ray crystallography. The IR spectroscopic examination of the ν(CN) stretch in the isonitrile adducts 4a and 4b revealed the weaker donor character of the supporting triazenido ligands compared to related β-diketiminato ligands.     

One-pot syntheses of alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III) bearing p-cymene or pentamethylcyclopentadienyl groups

Reaction of [(p-cymene)RuCl₂(PPh₃)] (1) or [Cp^∗MCl₂(PPh₃)] (Cp^∗ = C₅Me₅) (3a: M = Rh; 4a: M = Ir) with 1-alkynes and PPh₃ were carried out in the presence of KPF₆, generating the corresponding alkenyl-phosphonio complexes, [(p-cymene)RuCl(PPh₃){CHCR(PPh₃)}](PF₆) (2a: R = Ph; 2b: R = p-tolyl) or [Cp^∗MCl(PPh₃){CHCPh(PPh₃)}](PF₆) (5: M = Rh; 6: M = Ir). Similar reactions of complexes [Cp^∗RhCl₂(L¹)] (3a: L¹ = PPh₃; 3c: L¹ = P(OMe)₃) with L² (L² = PPh₃, PMePh₂, P(OMe)₃) gave [Cp^∗RhCl(L¹)(L²)](PF₆) (7bb: L¹ = L² = PMePh₂; 7ca: L¹ = P(OMe)₃, L² = PPh₃; 7cc: L¹ = L² = P(OMe)₃). Alkenyl-phosphonio complex 5 was treated with P(OMe)₃ or 2,6-xylyl isocyanide, affording [Cp^∗RhCl(L){CHCPh(PPh₃)}](PF₆) (8a: L = P(OMe)₃; 8b: L = 2,6-xylNC). X-ray structural analyses of 2a, 6 and 8a revealed that the phosphonium moiety bonded to the C_β atom of the alkenyl group are E configuration.     

Macrocyclic dinuclear gold(I) and silver(I) NHCs complexes

The ligands bis-(imidazolium) hexafluorophosphate (Himy = -C₃N₂H₃-, imidazolium; R = 1-naphthylmethylene, 1a; 9-anthracenylmethylene, 1b) with an oxoether chain were easily prepared by the reaction of substituted imidazole with the diglycol diiodide, followed by exchange of anions with . 1a and 1b reacted with Ag₂O in DMSO or CH₃CN to yield [2 + 2] dinuclear Ag(I) NHCs macrocyclic complexes 2a and 2b, which showed much different conformation in solid corresponding to the R- substituent. Carbene transmetalation reactions of 2a-b with Au(SMe₂)Cl give dinuclear Au(I) analogs 3a and 3b. The new NHCs complexes were characterized by elemental analyses, ¹H NMR, ¹³C NMR and the structures of 2a-b and 3a were confirmed by X-ray diffraction determination.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.