Calix[4]arene supported group 5 imido complexes

The reaction of imidoyl chlorides [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and calix[4]arene methyl ether H₃Mecalix unexpectedly leads to the formation of the structurally characterized vanadium (IV) complex [VCl(Mecalix)] (4). Calix[4]arene methyl ether stabilized imido complexes of the type [V(NR)(Mecalix)] (R = Ph 7, Tol 8, tBu 9) were afforded from the reaction of [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and the tris(lithium) or tris(sodium) salt of the calix[4]arene ether. The lithium salt [{Li₃(Mecalix)}₂] (5) is a dimer in the solid state, in which two monomeric trianions are bridged by lithium cations. Imido complexes [M(NR)(Mecalix)] (M = Nb: R = tBu, 12, R = Tol 13, R = Mes 14, R = Dipp 15; M = Ta: R = tBu 16, R = Tol 17) (Tol = 4-C₆H₄Me, Mes = 2,6-C₆H₃Me₂; Dipp = 2,6-C₆H₃iPr₂) have been prepared from structurally characterized [NbCl₂(Mecalix)] (10) and previously known [TaCl₂(Mecalix)] (11) via reaction with two equivalents of the appropriately metallated (Li, K) primary amine. The molecular structures of 13 and 15 confirm the mononuclear nature of these complexes.     

Synthesis and reactivity with amines of new diiron alkynyl methoxy carbene complexes

The new diiron alkynyl methoxy carbene complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CCR′}(Cp)₂]⁺ (R = 2,6-Me₂C₆H₃ (Xyl), R′ = Tol, 3a; R = Xyl, R′ = Ph, 3b; R = Xyl, R′=Buⁿ, 3c; R = Xyl, R′=SiMe₃, 3d; R = Me, R′ = Tol, 3e; R = Me, R′ = Ph, 3f) are obtained in two steps by addition of R′CCLi (R′ = Tol, Ph, Buⁿ, SiMe₃) to the carbonyl aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂]⁺ (R = Xyl, 1a; Me, 1b), followed by methylation of the resulting alkynyl acyl compounds [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(O)CCR′}(Cp)₂] (R = Xyl, R′ = Tol, 2a; R = Xyl, R′ = Ph, 2b; R = Xyl, R′ = Buⁿ, 2c; R = Xyl, R′ = SiMe₃, 2d; R = Me, R′ = Tol, 2e; R = Me, R′ = Ph, 2f). Complexes 3 react with secondary amines (i.e., Me₂NH, C₅H₁₀NH) to give the 4-amino-1-metalla-1,3-dienes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CHC(R′)(NMe₂)}(Cp)₂]⁺ (R = Xyl, R′ = Tol, 4a; R = Xyl, R′ = Ph, 4b; R = Me, R′ = Ph, 4c) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(Tol)(NC₅H₁₀)}(Cp)₂]⁺, 5. The addition occurs stereo-selectively affording only the E-configured products. Analogously, addition of primary amines R′NH₂ (R′ = Ph, Et, Prⁱ) affords the 4-(NH-amino)-1-metalla-1,3-diene complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(R)(NHR′)}(Cp)₂]⁺ (R = Ph, 6a; Et, 6b; Prⁱ, 6c). In the case of 6a, only the E isomer is formed, whereas a mixture of the E and Z isomers is present in the case of 6b,c, with prevalence of the latter. Moreover, the two isomeric forms exist under dynamic equilibrium conditions, as shown by VT NMR studies. Complexes 6 are deprotonated by strong bases (e.g., NaH) resulting in the formation of the neutral vinyl imine complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(NR)(Tol)}(Cp)₂] (R = Ph, 7a; Et, 7b; Prⁱ, 7c); the reaction can be reverted by addition of strong acids. X-ray crystal structures have been determined for 3a[CF₃SO₃] · Et₂O, 4c[CF₃SO₃], 6a[BF₄] · CH₂Cl₂, 6c[CF₃SO₃] · 0.5Et₂O and 7a · CH₂Cl₂.     

Rhenium(III) and technetium(III) complexes with 2-mercapto-1,3-azole ligands and X-ray crystal structures

Reactions of labile [MCl₃(PPh₃)₂(NCMe)] (M = Tc, Re) precursors with 1H-benzoimidazole-2-thiol (H₂L¹), 5-methyl-1H-benzoimidazole-2-thiol (H₂L²) and 1H-imidazole-2-thiol (H₂L³), in the presence of PPh₃ and [AsPh₄]Cl gave a new series of trigonal bipyramidal M(III) complexes [AsPh₄]{[M(PPh₃)Cl(H₂L^1-3)₃]Cl₃} (M = Re, 1-3; M = Tc, 4-6). The molecular structures of 1 and 3 were determined by X-ray diffraction. When the reactions were carried out with benzothiazole-2-thiol (HL⁴) and benzoxazole-2-thiol (HL⁵), neutral paramagnetic monosubstituted M(III) complexes [M(PPh₃)₂Cl₂(L^4,5)] (M = Re, 8, 9; M = Tc, 10, 11) were obtained. In these compounds, the central metal ions adopt an octahedral coordination geometry as authenticated by single crystal X-ray diffraction analysis of 8 and 11. Rhenium and technetium complexes 1, 4 and rhenium chelate compounds 8, 9 have been also synthesized by reduction of [MO₄]⁻ with PPh₃ and HCl in the presence of the appropriate ligand. All the complexes were characterized by elemental analyses, FTIR and NMR spectroscopy.     

Synthesis, characterization and in vitro cytotoxicity of the first palladium(II) oxalato complexes involving adenine-based ligands

The first [Pd(Lⁿ)₂(ox)] xH₂O oxalato(ox) complexes involving 2-chloro-N6-(benzyl)-9-isopropyladenine (L¹; complex 1), 2-chloro-N6-(4-methoxybenzyl)-9-isopropyladenine (L²; 2), 2-chloro-N6-(2,3-dimethoxybenzyl)-9-isopropyladenine (L³; 3), 2-chloro-N6-(2,4-dimethoxybenzyl)-9-isopropyladenine (L⁴; 4), and 2-chloro-N6-(4-methylbenzyl)-9-isopropyladenine (L⁵; 5) have been synthesized by the reactions of potassium bis(oxalato)palladate(II) dihydrate, [K₂Pd(ox)₂]·2H₂O, with the mentioned organic compounds (H₂ox = oxalic acid; x = 0 for 1-3 and 5 or 2 for 4). Elemental analyses (C, H, N), FTIR, Raman and NMR (¹H, ¹³C, ¹⁵N) spectroscopies, conductivity measurements and thermal studies (thermogravimetric and differential thermal analyses, TG/DTA) have been used to characterize the prepared complexes. The molecular structures of [Pd(L²)₂(ox)] (2) and [Pd(L⁵)₂(ox)]·L⁵·Me₂CO (5·L⁵·Me₂CO) have been determined by a single crystal X-ray analysis. The geometry of these complexes is slightly distorted square-planar with two appropriate Lⁿ (n = 2 or 5) molecules mutually arranged in the head-to-head (2) or head-to-tail (5) orientation. The Lⁿ ligands are coordinated to the central Pd(II) ion via the N7 atoms. The same conclusions regarding the binding properties of L¹-L⁵ ligands can be made based on multinuclear NMR spectra. In vitro cytotoxicity of the complexes 1-5 has been evaluated against human chronic myelogenous leukaemia (K562) and human breast adenocarcinoma (MCF7) cancer cell lines. Significant cytotoxicity has been determined for the complexes 3 (IC₅₀ = 6.2 μM) and 5 (IC₅₀ = 6.8 μM) on the MCF7 cell line, which is even better than that found for the well-known and widely-used platinum-bearing antineoplastic drugs, i.e. oxaliplatin and cisplatin.     

Copper(II) complexes derived from tripodal tris[(2-ethyl-(1-pyrazolyl)]amine

Three mono-nuclear copper(II) complexes [Cu(tepza)X]ClO₄ (X = Cl, 1; X = NCS, 2; X = dca, 3) and two dinuclear bridging complexes [Cu₂(tepza)₂(μ-C₄O₄)](ClO₄)₂·H₂O(4) and [Cu₂(tepza)₂(μ-C₅O₅)](ClO₄)₂(5) where tepza = tris[2-ethyl(1-pyrazolyl)]amine, dca = dicyanamide, C₄O₄²⁻ = 3,4-dihydroxycyclobut-3-ene-1,2-dionate (squarate dianion) and C₅O₅²⁻ = 4,5-dihydroxycyclopent-4-ene-1,2,3-trionate (croconate dianion) were synthesized and structurally characterized by IR and UV-Vis spectroscopy as well as by single X-ray crystallography. In the solid state, the geometry of copper(II) centers in these complexes are as follows: close to SP in 2, distorted TBP in 3, predominant SP in 4, and distorted octahedral in 5, whereas in solution distorted SP geometry was generally found. The squarato and the croconato dianions in complexes 4 and 5 are bridging the two copper(II) centers in cis-bis-monodentate and bis-bidentate bonding modes, respectively. Magnetic susceptibility measurements at variable temperatures (2-300 K) reveal the weak antiferromagnetic coupling in the two bridging dinuclear complexes 4 (J = −24.9 cm⁻¹) and 5 (J = −3.1 cm⁻¹).     

Interaction of Pt(II) and Pd(II) complexes of terpyridine with 1-methylazoles: A combined experimental and density functional study

The synthesis and characterization of several complexes of the composition [{M(terpy)}_n(L)](ClO₄)_m (M = Pt, Pd; L = 1-methylimidazole, 1-methyltetrazole, 1-methyltetrazolate; terpy = 2,2′:6′,2″-terpyridine; n = 1, 2; m = 1, 2, 3) is reported and their applicability in terms of a metal-mediated base pair investigated. Reaction of [M(terpy)(H₂O)]²⁺ with 1-methylimidazole leads to [M(terpy)(1-methylimidazole)](ClO₄)₂ (1: M = Pt; 2: M = Pd). The analogous reaction of [Pt(terpy)(H₂O)]²⁺ with 1-methyltetrazole leads to the organometallic compound [Pt(terpy)(1-methyltetrazolate)]ClO₄ (3) in which the aromatic tetrazole proton has been substituted by the platinum moiety. For both platinum(II) and palladium(II), doubly metalated complexes [{M(terpy)}₂(1-methyltetrazolate)](ClO₄)₃ (4: M = Pt; 5: M = Pd) can also be obtained depending on the reaction conditions. In the latter two compounds, the [M(terpy)]²⁺ moieties are coordinated via C5 and N4. X-ray crystal structures of 1, 2, and 3 are reported. In addition, DFT calculations have been carried out to determine the energy difference between fully planar [Pd(mterpy)(L)]²⁺ complexes Ip-IVp (mterpy = 4′-methyl-2,2′:6′,2″-terpyridine; L = 1-methylimidazole-N3 (I), 1-methyl-1,2,4-triazole-N4 (II), 1-methyltetrazole-N3 (III), or 3-methylpyridine-N1 (IV)) and the respective geometry-optimized structures Io-IVo. Whereas this energy difference is larger than 70 kJ mol⁻¹ for compounds I, II, and IV, it amounts to only 0.8 kJ mol⁻¹ for the tetrazole-containing complex III, which is stabilized by two intramolecular C-H?N hydrogen bonds. Of all complexes under investigation, only the terpyridine-metal ion-tetrazole system with N3-coordinated tetrazole appears to be suited for an application in terms of a metal-mediated base pair in a metal-modified oligonucleotide.     

Syntheses and characterization of titanium malonato and amino acid complexes: [Ti(cp)2(OOCCH2NMe2)] - The first structurally characterized α-amino acid titanium(III) complex

The reaction of [Ti(cp^∗)₂(BTMSA)] (1) (cp^∗ = η⁵-C₅Me₅, BTMSA = bis(trimethylsilyl)acetylene) with malonic acids ((HOOC)₂CR₂, R = H, Me) and N,N-dimethylglycine resulted in the formation of titanium(IV) dicarboxylato complexes [Ti(cp^∗)₂{(OOC)₂CR₂}] (R = H, 2; R = Me, 3) and an α-amino acid titanium(III) complex [Ti(cp^∗)₂(OOCCH₂NMe₂)] (4). The identities of complexes 2-4 were confirmed by microanalysis, ¹H and ¹³C NMR spectroscopy (2, 3), ESI-MS and CID experiments (2, 3) as well as by ESR and magnetic measurements (μ_eff = 1.81, 298 K) for 4. Single X-ray diffraction analyses of 2 and 4 exhibited monomolecular complexes in which the titanium atom is distorted tetrahedrally coordinated by two η⁵-C₅Me₅ rings and by the chelating bound malonato-κ²O,O′ (2) and N,N-dimethylglycinato-κ²O,O′ ligand (4).     

Synthesis, characterizations, and crystal structures of triorganotin(IV) derivatives with areneseleninic acids

Six new triorganotin(IV) complexes, [R₃Sn(O₂SeC₆H₄Cl)]_n (R = Me 1; Ph 2), [R₃Sn(O₂SeC₆H₄Me)]_n (R = Me 3; Ph 4), [R₃Sn(O₂SeC₆H₄Bu)]_n (R = Me 5; Ph 6) have been synthesized by the reaction of 4-chlorobenzeneseleninic acid, p-Tolueneseleninic acid, and 4-tert-butylbenzeneseleninic acid with triorganotin(IV) chloride in the presence of sodium ethoxide. All of the complexes were characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C, and ¹¹⁹Sn) spectroscopy, and X-ray crystallography. Crystal structures show that all of the complexes exhibit 1D infinite chain structures which are generated by the bidentate oxygen atoms and the five-coordinated tin centers.     

Extended molecular networks based on Zn and Cd imparting N-substituted imidazole

Synthesis of complexes with the formulations [M(CPI)₂Cl₂] (M = Zn, 1; M = Cd, 4) and [M(CPI)₆](X)₂ (M = Zn, X = NO₃⁻, 2; X = ClO₄⁻, 3; M = Cd, X = NO₃⁻, 5; X = ClO₄⁻, 6) have been achieved from the reactions of MCl₂, M(NO₃)₂·xH₂O and M(ClO₄)₂·xH₂O (M = Zn, Cd) with 1-(4-cyanophenyl)-imidazole (CPI). Complexes 1-6 have been characterized by elemental analyses and spectral studies (IR, ¹H, ¹³C NMR, electronic absorption and emission). Molecular structures of 1, 2, 3 and 6 have been determined crystallographically. Weak interaction studies on the complexes revealed presence of various interesting motifs resulting from C-H···N, C-H···Cl and π-π stacking interactions. The complexes under study exhibit strong luminescence at ∼450 nm in DMSO at room temperature.     

One-pot syntheses of alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III) bearing p-cymene or pentamethylcyclopentadienyl groups

Reaction of [(p-cymene)RuCl₂(PPh₃)] (1) or [Cp^∗MCl₂(PPh₃)] (Cp^∗ = C₅Me₅) (3a: M = Rh; 4a: M = Ir) with 1-alkynes and PPh₃ were carried out in the presence of KPF₆, generating the corresponding alkenyl-phosphonio complexes, [(p-cymene)RuCl(PPh₃){CHCR(PPh₃)}](PF₆) (2a: R = Ph; 2b: R = p-tolyl) or [Cp^∗MCl(PPh₃){CHCPh(PPh₃)}](PF₆) (5: M = Rh; 6: M = Ir). Similar reactions of complexes [Cp^∗RhCl₂(L¹)] (3a: L¹ = PPh₃; 3c: L¹ = P(OMe)₃) with L² (L² = PPh₃, PMePh₂, P(OMe)₃) gave [Cp^∗RhCl(L¹)(L²)](PF₆) (7bb: L¹ = L² = PMePh₂; 7ca: L¹ = P(OMe)₃, L² = PPh₃; 7cc: L¹ = L² = P(OMe)₃). Alkenyl-phosphonio complex 5 was treated with P(OMe)₃ or 2,6-xylyl isocyanide, affording [Cp^∗RhCl(L){CHCPh(PPh₃)}](PF₆) (8a: L = P(OMe)₃; 8b: L = 2,6-xylNC). X-ray structural analyses of 2a, 6 and 8a revealed that the phosphonium moiety bonded to the C_β atom of the alkenyl group are E configuration.     

Synthesis and spectroscopic characterization of organotin(IV) complexes with 2-benzoylpyridine-N(4)-cyclohexylthiosemicarbazone (HBPCT): X-ray crystal structure of [PhSnCl2(BPCT)]

The reaction of 2-benzoylpyridine-N(4)-cyclohexylthiosemicarbazone [HBPCT, (1)] ligand with organotin(IV) chloride(s) lead to the formation of three new organotin(IV) complexes: [MeSnCl₂(BPCT)] (2), [PhSnCl₂(BPCT)] (3) and [Ph₂SnCl(BPCT)] (4). The ligand (1) and its organotin(IV) complexes (2-4) have been synthesized and characterized by CHN analyses, molar conductivity, UV-Vis, FT-IR and ¹H NMR spectral studies. The single crystal X-ray diffraction studies indicated that [PhSnCl₂(BPCT)] (3) is six coordinated and adopts strongly a distorted octahedral configuration with the coordination through pyridine-N, azomethine-N and thiolato-S atoms of the ligand. The crystal system of [PhSnCl₂(BPCT)] (3) is orthorhombic with space group P2ac2n and the unit cell dimensions: a = 28.1363(5) Å, b = 9.5970(2) Å, c = 9.4353(2) Å.     

Palladium(II), platinum(II), ruthenium(II) and mercury(II) complexes of potentially tridentate Schiff base ligands of (E, N, O) type (E = S, Se, Te): Synthesis, crystal structures and applications in Heck and Suzuki coupling reactions

Schiff bases of 2-hydroxybenzophenone (HBP) (C₆H₅)(2-HOC₆H₄)CN(CH₂)_nEAr (L1/L2: E = S, Ar = Ph, n = 2/3; L3/L4: E = Se, Ar = Ph, n = 2/3; L5/L6: E = Te, Ar = 4-MeOC₆H₄, n = 2/3) and their complexes [PdCl(L-H)] (L = L1−L6; 1, 2, 3, 5, 7, 11), [PtCl(L3-H/L5-H)] (4/8), [PtCl₂(L4/L6)₂] (6/12), [(p-cymene)RuCl(L5/L6)]Cl (9/13) and [HgBr₂(L5/L6)₂] (10/14) have been synthesized and characterized by proton, carbon-13, selenium-77 and tellurium-125 NMR, IR and mass spectra. Single crystal structures of L1, 1, 3, 4, 5 and 7 were solved. The Pd-E bond distances (Å): 2.2563(6) (E = S), 2.3575(6)−2.392(2) (E = Se); 2.5117(5)−2.5198(5) (E = Te) are near the lower end of the bond length range known for them. The Pt-Se bond length, 2.3470(8) Å, is also closer to the short values reported so far. The Heck and Suzuki reaction were carried out using complexes 1, 3, 5 and 7 as catalysts under aerobic condition. The percentage yields for trans product in Heck reaction were found upto 85%.     

Synthesis and characterisation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes [Ti(IV), Zr(IV), Hf(IV), La(III), Ce(III), Yb(III), Sn(II) and Fe(II)]

The preparation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes is described. These are of formula [M{η⁵-C₅H₄(BX)}Cl₃] [M = Ti and X = CAT (2a), CAT^t (2b) or CAT^tt (2c); X = CAT^tt and M = Zr (4a) or Hf (4b)], [M{η⁵-C₅H₄(BX)}₂Cl₂] [M = Zr, X = CAT (3a) or CAT^t (3c); or M = Hf, X = CAT (3b) or CAT^t (3d)], [M{(μ-η⁵-C₅H₃BCAT)₂ SiMe₂}Cl₂] [M = Zr (5a) or Hf (5b)], [M{η⁵-C₅H₃(BCAT)₂}Cl₃] [M = Zr (6a) or Hf (6b)], [M{η⁵-C₅H₄BCAT}₃(THF)] [M = La (7a), Ce (7b) or Yb (7c)], [Sn{η⁵-C₅ H₄(BCAT^t)}Cl](8) and [Fe{η⁵-C₅H₄(BCAT^t)}₂] (9). The abbreviations refer to BO₂C₆H₄-1,2 (BCAT) and the 4-Bu^t (BCAT^t) and the (BCAT^tt) analogues. The compounds 2a-9 have been characterised by microanalysis, multinuclear NMR and mass spectra. The single crystal X-ray structure of the lanthanum compound 7a is presented.     

Vanadium complexes with 2-pyridineformamide thiosemicarbazones: In vitro studies of insulin-like activity

Reaction of VOCl₂ with 2-pyridineformamide thiosemicarbazone (H2Am4DH) and its N(4)-methyl (H2Am4Me), N(4)-ethyl (H2Am4Et) and N(4)-phenyl (H2Am4Ph) derivatives in ethanol gave as products [VO(H2Am4DH)Cl₂] (1), [VO(H2Am4Me)Cl₂] · 1/2HCl (2), [VO(H2Am4Et)Cl₂] · HCl (3) and [VO(2Am4Ph)Cl] (4). Upon the dissolution of 1-4 in water, oxidation immediately occurs with the formation of [VO₂(2Am4DH)] (5), [VO₂(2Am4Me)] (6), [VO₂(2Am4Et)] (7) and [VO₂(2Am4Ph)] (8). The crystal and molecular structures of 5 and 6 were determined. Complexes 5-8 inhibited glycerol release in a similar way to that observed with insulin but showed a low enhancing effect on glucose uptake by rat adipocytes.     

Hydrogen-halide versus alkyl-halide oxidative addition in dimethyl platinum(II) complexes: Crystal structure of [PtBr2(bpy)]

Dimethyl platinum(II) complexes [PtMe₂(NN)] {NN = bu₂bpy (4,4′-di-tert-butyl-2,2′-bipyridine) (1a), bpy (2,2′-bipyridine) (1b), phen (1,10-phenanthroline) (1c)} reacted with commercial 3-bromo-1-propanol in the presence of 1,3-propylene oxide to afford cis, trans- [PtBrMe₂{(CH₂)₃OH}(NN)] (NN = bu₂bpy (2a), bpy (2b), phen (2c)). On the other hand, [PtMe₂(NN)] (1a)-(1b) reacted with the trace of HBr in commercial 3-bromo-1-propanol to give [PtBr₂(NN)] (NN = bu₂bpy (3a), bpy (3b)). The reaction pathways were monitored by ¹H NMR at various temperatures. Treatment of 1a-1b with a large excess of 3-bromo-1-propanol at −80 °C gave the corresponding methyl(hydrido)platinum(IV) complexes [PtBr(H)Me₂(NN)] (NN = bu₂bpy (4a), bpy (4b)) via the oxidative addition of dimethyl platinum(II) complexes with HBr. The complexes [PtBr(H)Me₂(NN)] decomposed by reductive elimination of methane above −20 °C for bu₂bpy and from −20 to 0 °C for bpy analogue to give methane and platinum(II) complexes [PtBrMe(NN)] (5a)-(5b) and then decomposed at about 0 °C to yield [PtBr₂(NN)] and methane. When the reactions were performed at a molar ratio of Pt:RX/1:10, the corresponding complexes [PtBrMe(NN)] (5a)-(5b) were also obtained. The crystal structure of the complex 3b shows that platinum adopts square planar geometry with a twofold axis through the platinum atom. The Pt…Pt distance (5.164 Å) is considerably larger than the interplanar spacing (3.400 Å) and there is no platinum-platinum interaction.     

Probing valence and spin situations in selective ruthenium-iminoquinonoid frameworks. An experimental and DFT analysis

The ruthenium-iminoquinone complexes, [Ru(tpm)(Cl)(Q)]⁺ [tpm = tris(1-pyrazolyl)methane, Q = 3,5-di-tert-butyl-N-aryl-1,2-benzoquinonemonoimine, where aryl = C₆H₅, [1]⁺; m-(OCH₃)₂C₆H₃, [2]⁺; m-(Cl)₂C₆H₃, [3]⁺] have been synthesized. The sensitive bond distances of “Q” in [1](ClO₄) and [2](ClO₄), C-O: 1.294(8), 1.281(2) Å; C-N: 1.352(8), 1.335(2) Å; and C-C(meta): 1.366(10)/1.367(9) Å, 1.364(2)/1.353(2) Å, respectively, and other analytical as well as theoretical (DFT) events suggest the valence configuration of [Ru^III(tpm)(Cl)(Q_Sq⁻)]⁺ for [1]⁺-[3]⁺. The paramagnetic [1]⁺-[3]⁺ show sharp ¹H NMR spectra with strikingly small J of 1.8-3.0 Hz. The DFT calculations on [1]⁺ predict that the triplet (S = 1) state exists above (1004 cm⁻¹) the singlet (S = 0) ground state. [1]⁺ exhibits μ = 2.2 BM at 300 K which diminishes to 0.3 BM near 2 K due to the steady decrease in the ratio of triplet to singlet population with the lowering of temperature. [1]⁺-[3]⁺ exhibit one oxidation and two successive reductions each in CH₃CN. Experimental and DFT analyses collectively establish the valence configurations at the non-innocent {Ru-Q} interface along the redox chain as [(tpm)(Cl)Ru^III(Q_Q^o)]²⁺ ([1]²⁺-[3]²⁺) → [(tpm)(Cl)Ru^III(Q_Sq⁻)]⁺ ([1]⁺-[3]⁺) → [(tpm)(Cl)Ru^II(Q_Sq⁻)] ↔ [(tpm)(Cl)Ru^III(Q_Cat)] (1-3) → [(tpm)(Cl)Ru^II(Q_Cat)]⁻ ([1]⁻-[3]⁻). The spectral features of [1]ⁿ-[3]ⁿ (n = +2, +1, 0) have been addressed based on the TD-DFT calculations on [1]ⁿ.     

Preparation and characterization of macrocyclic dinickel complexes coligated by monoalkyl- and dialkylcarbamates

The dinuclear nickel(II) complex [Ni₂L(Cl)]⁺ (1), where (L)²⁻ represents a 24-membered binucleating hexamine-dithiophenolate ligand, reacts readily with primary and secondary amines RR′NH in the presence of CO₂ (1 bar) to give dinuclear monoalkyl- and dialkylcarbamate complexes [Ni₂L(O₂CNRR′)]⁺ (R = H, R′ = CH₂Ph (2), R = H, R′ = n-Bu (3), R = H, R′ = n-Oct (4), R = H, R′ = CH₂CH₂OH (5), R = R′ = Et (6), and R = R′ = CH₂CH₂OH (7)). Complexes 2-7 can also be prepared by the reaction of 1 with CO₂(air)/amine. The carbamate complexes are hydrolyzed in methanolic solution to give the known alkylcarbonate complex [Ni₂L(O₂COMe)]⁺ (8). These conversions are less rapid than the transesterification reactions of 8, due to a less electron-demanding carboxyl C(carbamate) atom. All new complexes were either isolated as perchlorate or tetraphenylborate salts and fully characterized by elemental analysis, UV/Vis, and IR spectroscopy. The structures of 2[BPh₄] and 7[BPh₄] have also been determined by X-ray crystallography. They confirm the presence of μ_1,3-bridging alkylcarbamate units in the products.     

Copper(II) complexes with monocarboxylate ligands bearing different substituent groups: Synthesis and spectroscopic studies

In our continuing efforts to explore the effects of substituent groups of ligands in the formation of supramolecular coordination structures, seven new Cu^II complexes formulated as [Cu₂(L¹)₄(DMF)₂] (1), {[Cu₂(L¹)₄(Hmta)](H₂O)_0.75}_∞ (2), [Cu₂(L²)₄(2,2′-bipy)₂] (3), [Cu₂(L³)₄(H₂O)₂] (4), [Cu₂(L³)₄(Hmta)]_∞ (5), [Cu₂(L³)₄(Dabco)]_∞ (6) and [Cu₂(L³)₄(Pz)]_∞ (7) with three monocarboxylate ligands bearing different substituent groups HL¹-HL³ (HL¹ = phenanthrene-9-carboxylic acid, HL² = 2-phenylquinoline-4-carboxylic acid, HL³ = adamantane-1-carboxylic acid, Hmta = hexamethylenetetramine, 2,2′-bipy = 2,2′-bipyridine, Dabco = 1,4-diazabicyclo[2.2.2] octane and Pz = pyrazine), have been prepared and characterized by X-ray diffraction. In 1, 2 and 4-7, each Cu^II ion is octahedrally coordinated, and carboxylate acid acts as a syn-syn bridging bidentate ligand. While each Cu^II ion in 3 is penta-coordinated in a distorted square-pyramidal geometry. 1 and 4 both show a dinuclear paddle-wheel block, while 2, 5, 6 and 7 all exhibit an alternated 1D chain structure between dinuclear paddle-wheel units of the tetracarboxylate type Cu₂-(RCO₂)₄ and the bridging auxiliary ligands Hmta, Dabco and Pz. Furthermore, 3 has a carboxylic unidentate and μ_1,1-oxo bridging dinuclear structure with the chelating auxiliary ligand 2,2′-bipy. Moreover, complexes 1-6 were characterized by electron paramagnetic resonance (EPR) spectroscopy.     

Imidazolium formation from the reaction of N-heterocyclic carbene stabilised group 13 trihydride complexes with organic acids

The reactions of the N-heterocyclic carbene (NHC) stabilised group 13 trihydride complexes [AlH₃(IMeMe)] (1) (IMeMe = 1,3,4,5-tetramethylimidazol-2-ylidene), [AlH₃(IⁱPrMe)] (2) (IⁱPrMe = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) with three molar equivalents of phenol, and [InH₃(IMes)] (3) (IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazole-2-ylidene) with one molar equivalent of 1,1,1,5,5,5-hexafluoropentan-2,4-dione (F₆acacH) are presented. These render the imidazolium tetraphenoxyaluminate species; [IMeMe · H][Al(OPh)₄] (4) and [IⁱPrMe · H][Al(OPh)₄] (5), and 1,3-bis(2,4,6-trimethylphenyl)imidazolium 1,1,1,5,5,5-hexafluoropentan-2,4-dionate; [IMes · H][CH{C(O)CF₃}₂] (6), the latter leading to metallohydride decomposition. The molecular structures of 4 and 6 are described.     

Synthesis, reactivities and catalytic carbonylation of rhodium(I) carbonyl complexes containing isomeric acetylpyridine ligands

[Rh(CO)₂Cl]₂ reacts with two mole equivalent of 2-acetylpyridine (a), 3-acetylpyridine (b) and 4-acetylpyridine (c) to afford chelate [Rh(CO)Cl(η²-N∩O)] (1a) and non-chelate [Rh(CO)₂Cl(η¹-N∼O)] (1b, 1c) complexes, where, N∩O = a, N∼O = b, c. Oxidative addition (OA) of 1a-1c with CH₃I and C₂H₅I yields penta coordinate rhodium(III) complexes, [Rh(COR)ClI(η²-N∩O)] {R = -CH₃ (2a); -C₂H₅ (3a)} and [Rh(COR)(CO)ClI(η¹-N∼O)] {R = -CH₃ (2b, 2c); -C₂H₅ (3b, 3c)}. Kinetic study for the reaction of 1a-1c with CH₃I indicates a pseudo-first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester was evaluated at different initial CO pressures 5, 10 and 20 bar at ∼25 °C and higher turn over numbers (TON = 1581-1654) were obtained compared to commercial Monsanto’s species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature = 130 ± 1 °C, pressure = 15-32 bar, rpm = 450, time = 1 h and catalyst: substrate = 1: 1900.