Chromium(III) complexes with 2-(2′-pyridyl)imidazole: Synthesis, crystal structure and magnetic properties

The preparation, crystal structure and variable temperature-magnetic investigation of three 2-(2′-pyridyl)imidazole-containing chromium(III) complexes of formula PPh₄[Cr(pyim)(C₂O₄)₂]·H₂O (1), AsPh₄[Cr(pyim)(C₂O₄)₂]·H₂O (2) and [Cr₂(pyim)₂(C₂O₄)₂(OH₂)₂]·2pyim · 6H₂O (3) [pyim = 2-(2′-pyridyl)imidazole, , and ] are reported herein. The isomorphous compounds are made up of discrete [Cr(pyim)(C₂O₄)₂]⁻ anions, cations [X = P (1) and As (2)] and uncoordinated water molecules. The chromium environment in 1 and 2 is distorted octahedral with Cr-N and Cr-O bond distances varying in the ranges 2.040(3)-2.101(3) and 1.941(3)-1.959(3) Å, respectively. The angle subtended by the chromium(III) ion by the two didentate oxalate ligands cover the range 82.49(12)-82.95(12)°, values which are somewhat greater than those concerning the chelating pyim molecule [77.94(13) (1) and 78.50(13)° (2)]. Complex 3 contains discrete centrosymmetric [Cr₂(pyim)₂(C₂O₄)₂(OH)₂] neutral units where the two chromium(III) ions are joined by a di-μ-hydroxo bridge, the oxalate and pyim groups acting as peripheral didentate ligands. Uncoordinated water and pyim molecules are also present in 3 and they contribute to the stabilization of its structure by extensive hydrogen bonding and π-π type interactions. The values of the intramolecular chromium-chromium separation and angle at the hydroxo bridge in 3 are 2.9908(12) Å and 99.60(16)°, respectively. Magnetic susceptibility measurements of 1-3 in the temperature range 1.9-300 K show the occurrence of weak inter- (1 and 2) and intramolecular (3) antiferromagnetic couplings. The magnetic properties of 3 have been interpreted in terms of a temperature-dependent exchange integral, small changes of the angle at the hydroxo bridge upon cooling being most likely responsible for this peculiar magnetic behavior.     

Oxalate, squarate and croconate complexes with bis(2-pyrimidylcarbonyl)amidatecopper(II): synthesis, crystal structures and magnetic properties

The preparation and magnetic properties of three copper(II) compounds of formulae [Cu₂(bpcam)₂(H₂O)₂(C₂O₄)] (1), [Cu₂(bpcam)₂(H₂O)₄(C₄O₄)] · 10 H₂O (2) and Cu₂(bpcam)₂(C₅O₅)(H₂O)₃ (3) [bpcam = bis(2-pyrimidyl)amidate, and are reported. The structures of two of them (1 and 2) have been solved by single crystal X-ray diffraction and consists of centrosymmetric discrete copper(II) dinuclear units bridged by bis-bidentate oxalate (1) and bis-monodentate squarate (2), with the bpcam group acting as a terminal tridentate ligand. Each copper atom in 1 exhibits a distorted elongated octahedral coordination geometry. Three bpcam nitrogen atoms and one oxalate oxygen define the basal plane while the other oxalate oxygen and a water molecule take up the axial positions. Each copper atom in 2 is in an elongated octahedral surrounding with three bpcam nitrogen atoms and one squarate oxygen in the equatorial plane and two water molecules in the axial positions. The intramolecular copper-copper separations are 5.677(1) (1) and 7.819(53) Å (2). Magnetic susceptibility measurements for 1-3 in the temperature range 1.9-290 K show the occurrence of weak ferromagnetic interactions through oxalato (J = +0.75 cm⁻¹) and squarato (J = +1.26 cm⁻¹), the Hamiltonian being defined by . These values are analyzed and discussed in the light of the available magneto-structural data for analogous systems. The quasi-Curie law observed in 3 (θ = −1.15 K) contrasts with the significant antiferromagnetic interaction through bis-chelating croconate in other structurally characterized croconate-bridged copper(II) complexes and rules out the presence of bridging croconate in this compound.     

Synthesis and characterization of di- and tri-organotin(IV) complexes with Schiff base ligand pyruvic acid 3-hydroxy-2-naphthoyl hydrazone

A series of organotin(IV) complexes with Schiff base ligand pyruvic acid 3-hydroxy-2-naphthoyl hydrazone [R₂SnLY]₂, L = 3-HO-C₁₀H₆-2-CONHNC(CH₃)COOH, R = n-C₄H₉, Y = CH₃OH (1), R = n-C₄H₉, Y = N (2), R = PhCH₂ (3), R = Ph, Y = CH₃OH (4), R = Me, (5) and [R₃SnLY], L = 3-HO-C₁₀H₆-2-CONHNC(CH₃)COOH, R = n-C₄H₉, Y = H₂O, (6), R = Ph (7), R = Me (8) have been synthesized. These complexes have been characterized by elemental analysis, IR, ¹H and ¹¹⁹Sn NMR spectra. The crystal and molecular structure of complexes 1, 2 and 6 have been determined by X-ray single crystal diffraction. Results showed that complex 1 has a dimeric structure and the central tin atom is rendered seven-coordinate in a distorted pentagonal-bipyramid configuration. The complex 2 has a monoclinic structure and the central tin atom is rendered six-coordinate in octahedrally configuration with a planar of SnO₃N unit and two apical aryl C atoms. And the whole structure consists of molecular units connected by weak intermolecular Sn?N and O-H?N interactions. In the complex 6, the central tin atom is five-coordinate in distorted trigonal-bipyramidal geometry.     

Copper(II) complexes derived from tripodal tris[(2-ethyl-(1-pyrazolyl)]amine

Three mono-nuclear copper(II) complexes [Cu(tepza)X]ClO₄ (X = Cl, 1; X = NCS, 2; X = dca, 3) and two dinuclear bridging complexes [Cu₂(tepza)₂(μ-C₄O₄)](ClO₄)₂·H₂O(4) and [Cu₂(tepza)₂(μ-C₅O₅)](ClO₄)₂(5) where tepza = tris[2-ethyl(1-pyrazolyl)]amine, dca = dicyanamide, C₄O₄²⁻ = 3,4-dihydroxycyclobut-3-ene-1,2-dionate (squarate dianion) and C₅O₅²⁻ = 4,5-dihydroxycyclopent-4-ene-1,2,3-trionate (croconate dianion) were synthesized and structurally characterized by IR and UV-Vis spectroscopy as well as by single X-ray crystallography. In the solid state, the geometry of copper(II) centers in these complexes are as follows: close to SP in 2, distorted TBP in 3, predominant SP in 4, and distorted octahedral in 5, whereas in solution distorted SP geometry was generally found. The squarato and the croconato dianions in complexes 4 and 5 are bridging the two copper(II) centers in cis-bis-monodentate and bis-bidentate bonding modes, respectively. Magnetic susceptibility measurements at variable temperatures (2-300 K) reveal the weak antiferromagnetic coupling in the two bridging dinuclear complexes 4 (J = −24.9 cm⁻¹) and 5 (J = −3.1 cm⁻¹).     

Synthesis and reactivity of osmium (VI) nitrido complexes containing pyridine-carboxylato ligands

A series of osmium(VI) nitrido complexes containing pyridine-carboxylato ligands Os^VI(N)(L)₂X (L = pyridine-2carboxylate (1), 2-quinaldinate (2) and X = Cl (a), Br (1b and 2c) or CH₃O (2b)) and [Os^VI(N)(L)X₃]⁻ (L = pyridine-2,6-dicarboxylate (3) and X = Cl (a) or Br (b)) have been synthesised. Complexes 1 and 2 are electrophilic and react readily with various nucleophiles such as phosphine, sulfide and azide. Reaction of Os^VI(N)(L)₂X (1 and 2) with triphenylphosphine produces the osmium(IV) phosphiniminato complexes Os^VI(NPPh₃)(L)₂X (4 and 5). The kinetics of nitrogen atom transfer from the complexes Os^VI(N)(L)₂Br (2c) (L = 2-quinaldinate) with triphenylphosphine have been studied in CH₃CN at 25.0 °C by stopped-flow spectrophotometric method. The following rate law is obtained: −d[Os(VI)]/dt = k₂[Os(VI)][PPh₃]. Os^VI(N)(L)₂Cl (L = 2-quinaldinate) (2a) reacts also with [PPN](N₃) to give an osmium(III) dichloro complex, trans-[PPN][Os^III(L)₂Cl₂] (6). Reaction of Os^VI(N)(L)₂Cl (L = 2-quinaldinate) (2a) with lithium sulfide produces an osmium(II) thionitrosyl complex Os^II(NS)(L)₂Cl (7). These complexes have been structurally characterised by X-ray crystallography.     

A family of titanium (IV) alkoxo complexes with N,O and O,O chelating ligands. Crystal structure of [Ti(O-i-Pr)2{2-(−)-menthoxo-pyridine}2]

In view of the wide applicability and versatility of titanium based Lewis acids in selective organic synthesis including asymmetric synthesis, we have synthesized a family of mono and polyatomic titanium derivatives. The polymetallic complexes prepared are bridged by pyridimine, quinone and triazine based ligands. The synthesis of [{Ti(O-i-Pr)₃(Oddbf)}₂] (1), [Ti(O-i-Pr)₂(Oddbf)₂] (2), [{Ti(O-i-Pr)₂(Oddbf)(OMent)}₂] (3) (ddbfO = 2,3-dihydro-2,2-dimethyl-benzofuranoxo; MentO = (1R,2S,5R)-(−)-menthoxo), [{Ti(O-i-Pr)₃(OMenpy)}₂] (4), [Ti(O-i-Pr)₂(OMenpy)₂] (5) (MenpyO = (1S,2S,5R)-(−)-menthoxo-pyridine); [{(Ti(OR)₃)₂L}_n] (RO = isopropoxo, (1R,2S,5R)-(−)-menthoxo) (6-11) and [{(Ti(O-i-Pr)₃)₃L}_n] (12) was accomplished from a Lewis acid such as Ti(O-i-Pr)₄, [{Ti(O-i-Pr)₃(OMent)}₂] or [Ti(OMent)₄] and chelating ligands (ddbfOH = 2,3-dihydro-2,2-dimethyl-benzofuranol; MenpyOH = (1R,2S,5R)-(−)-5-methyl-2-isopropyl-1-(2′-pyridinyl)cyclohexan-1-ol; LH₂ = 4,6-dihydroxy-2,5-diphenyl-pyrimidine, 2,4-dihydroxy-5,6-dimethyl-pyrimidine, 5,8-dihydroxy-1,4-napthoquinone, 2,5-dihydroxy-1,4-benzoquinone and LH₃ = cyanuric acid) that provide a rigid framework for the metal centre. The molecular structure of 5 has been determined by single crystal X-ray diffraction studies.     

Influence of the phosphine arrangement on the reactivity of palladium(II) and platinum(II) polyphosphine complexes with copper(I) chloride

The distorted square-planar complexes [Pd(PNHP)Cl]Cl (1) (PNHP = bis[2-(diphenylphosphino)ethyl]amine), [M(P₃)Cl]Cl [P₃ = bis[2-(diphenylphosphino)ethyl]phenylphosphine; M = Pd (2), Pt (3)] and [Pt(NP₃)Cl]Cl (5) (NP₃ = tris[2-(diphenylphosphino)ethyl]amine), coexisting in the later case with a square-pyramidal arrangement, react with one equivalent of CuCl to give the mononuclear heteroionic systems [M(L)Cl](CuCl₂) [L = PNHP, M = Pd (1a); L = P₃, M = Pd (2a), Pt (3a); L = NP₃, M = Pt (5a)]. The crystal structure of 3a confirms that Pt(II) retains the distorted square-planar geometry of 3 in the cation with P₃ acting as tridentate chelating ligand, the central P atom being trans to one chloride. The counter anion is a nearly linear dichlorocuprate(I) ion. However, the five-coordinate complexes [Pd(NP₃)Cl]Cl (4), [M(PP₃)Cl]Cl (M = Pd (6), Pt (7); PP₃ = tris[2-(diphenylphosphino)ethyl] phosphine) containing three fused five-membered chelate rings undergo a ring-opening by interaction with one (4, 6, 7) and two (6, 7) equivalents of CuCl with formation of neutral MCu(L)Cl₃ [L = NP₃, M = Pd (4a); L = PP₃, M = Pd (6a), Pt (7a)] and ionic [MCu(PP₃)Cl₂](CuCl₂) [M = Pd (6b), Pt (7b)] compounds, respectively. The heteronuclear systems were shown by ³¹P NMR to have structures where the phosphines are acting as tridentate chelating ligands to M(II) and monodentate bridging to Cu(I). Further additions of CuCl to the neutral species 6a and 7a in a 1:1 ratio resulted in the achievement of the ionic complexes 6b and 7b with ions as counter anions. It was demonstrated that the formation of heterobimetallic or just mononuclear mixed salt complexes was clearly influenced by the polyphosphine arrangement with the tripodal ligands giving the former compounds. However, complexes [M(NP₃)Cl]Cl constitute one exception and the type of reaction undergone versus CuCl is a function of the d⁸ metal centre.     

Synthesis and characterization of Cu(II) and Ni(II) complexes of a tripodal ligand containing imidazoles

Two complexes of the formula [MH₃L](ClO₄)₂ [M = Cu(II) (1), Ni(II) (2)] have been prepared by the reaction of M(ClO₄)₂ · 6H₂O with the ligand (H₃L) formed by the Schiff base condensation of tris(2-aminoethyl)amine (tren) with three molar equivalents of 4-methyl-5-imidazolecarboxaldehyde and structurally and magnetically characterized. The structures of 1 and 2 are isomorphous with each other and with the iron(II) complex of H₃L which has been reported previously. The ligand, while potentially heptadentate, forms six coordinate complexes with both metal centers forming three M-N_imine and three M-N_imidazole bonds. The tren central N atom is at a nonbonded distance from M of 3.261 Å for 1 and 3.329 Å for 2. The neutral complex CuHL 3 was prepared by reaction of H₃L with Cu(OCH₃)₂ and the ionic complex Na[NiL] 4 was prepared by deprotonation of 2 with aqueous sodium hydroxide. Magnetic measurements of 1-3 are consistent with the spin-only values expected for S = 1/2 (d⁹, Cu(II)) and S = 1 (d⁸, Ni (II)) systems.     

Temperature effect on the conversions of phthalato and maleato manganese(II) complexes with diamine ligands

1,10-Phenanthroline hydrogen phthalato manganese(II) dimer [Mn₂(Hphth)₂(phen)₄] · 2Hphth · 6H₂O (1), monomeric phenanthroline phthalato manganese(II) monomer [Mn(phth)(phen)₂(H₂O)] · 2.5H₂O (2), 2,2′-bipyridine phthalato manganese(II) polymer [Mn(phth)(bpy)(H₂O)₂]_n (3) and 1,10-phenanthroline maleato polymer [Mn(male)(phen)(H₂O)₂]_n · 2nH₂O (4) (H₂phth = o-phthalic acid, male = maleic acid, phen = 1,10-phenanthroline and bpy = 2,2′-bipyridine) have been synthesized and characterized spectroscopically and structurally. Each Mn(II) atom in dimeric 1 is octahedrally coordinated by two oxygen atoms of phthalate anions and by two cis-phenanthroline ligands. The hydrogen phthalato anion bridges the Mn(II) ions through the deprotonated carboxyl groups, while the carboxylic acid group remains free. In the monomeric 2, the Mn(II) ion is octahedrally surrounded by four nitrogen atoms from two cis-phen ligands, one carboxyl oxygen from a monodentate phth ion, and one coordinated water molecule. The dimeric phthalato complex 1 can be cleaved into monomer 2 under heating with deprotonation, and the course of the reaction can be qualitatively traced by IR spectra. The phthalate group in the complex 3 binds to two manganese atoms through the vicinal carboxyl-oxygen atoms in syn-syn bridging mode. The Mn(II) atoms are linked by the phthalate group to yield a one-dimensional chain running along the a-axis. The coordination polymer 3 can be obtained from the reaction of dichloro dibipyridine manganese with phthalate under heating. In polymer 4, the manganese atom is six-coordinated by two nitrogen atoms from phen, two oxygen atoms from the coordinated water molecules and two oxygen atoms from two different maleate dianions. Each maleato unit links two neighboring manganese atoms to yield one-dimensional chain along b-axis in bis-monodentate mode. The single-chain polymer 4 prepared at low temperature can be converted to double-chain coordination polymer [Mn(male)(phen)]_n · nH₂O (5) with dehydration in warm solution.     

Assembly of metal coordination framework, [M(C5O5)(dpe)], with a 2D bi-layer architecture: Thermal stability and magnetic properties (M = Mn, Fe, Cd and Co; dpe = 1,2-bis(4-pyridyl)ethane)

A series of coordination polymers, [M(C₅O₅)(dpe)] (M = Mn 1, Fe 2, Cd 3 and Co 4; dpe = 1,2-bis(4-pyridyl)ethane) with a 2D metal-organic framework (MOF) has been synthesized and characterized by single-crystal X-ray diffraction studies. Structural determination reveals that compounds 1-4 are isostructural and possess a 2D brick-wall-like layered framework with a rectangle grid as the basic building unit through the connectivity of metal ions with μ₃-, μ₄-croconates and anti-dpe ligands. Two 2D layers are then cross-linkaged by gauche-dpe ligands to complete a 2D bi-layered MOF and then extended to a 3D supramolecular architecture through π-π and C-H?O interactions between the croconate and pyridyl rings of dpe, which exhibit high thermo-stability and keep their crystalline forms up to 350 °C. The magnetic exchange coupling between the metal centers for compounds 1, 2 and 4 was analyzed and based on the Curie-Weiss expression and a binuclear magnetic model. The negative values of the Weiss constant and the magnetic exchange coupling constant indicate the antiferromagnetic nature between the metal ions via the bridges of bis-bidentate adjacent μ₃-croconate ligands.     

Rhenium(IV) cyanate complexes: Synthesis, crystal structures and magnetic properties of NBu4[ReBr4(OCN)(DMF)] and (NBu4)2[ReBr(OCN)2(NCO)3]

Two new rhenium(IV) mononuclear compounds of formula NBu₄[ReBr₄(OCN)(DMF)] (1) and (NBu₄)₂[ReBr(OCN)₂(NCO)₃] (2) (NBu₄ = tetrabutylammonium cation, OCN = O-bonded cyanate anion, NCO = N-bonded cyanate anion and DMF = N,N-dimethylformamide) have been synthesized and their crystal structures determined by single-crystal X-ray diffraction. 1 crystallizes in the monoclinic system with the space group P2₁/n, whereas 2 crystallizes in the triclinic one with as space group. In both complexes the rhenium atom is six-coordinated, in 1 by four Br atoms in the equatorial plane, and two trans-oxygen atoms, one of a DMF molecule and another one from a cyanato group, while in 2 by one bromide anion and five cyanate ligands, two of which are O-bonded and three N-bonded, forming a somewhat distorted octahedral surrounding. Magnetic susceptibility measurements on polycrystalline samples of 1 and 2 in the temperature range 1.9-300 K are interpreted in terms of magnetically isolated spin quartets with large values of the zero-field splitting (|2D| is ca. 41.6 and 39.2 cm⁻¹ for 1 and 2, respectively).     

Hydrogen-bonded copper(II) and nickel(II) complexes and coordination polymeric structures containing reduced Schiff base ligands

Complexes [Cu(HSas)(H₂O)] · 2H₂O (H₃Sas = N-(2-hydroxybenzyl)-l-aspartic acid) (1), [Cu(HMeSglu)(H₂O)] · 2H₂O (H₃MeSglu = (N-(2-hydroxy-5-methylbenzyl)-l-glutamic acid) (2), [Cu₂(Smet)₂] (H₂Smet = (N-(2-hydroxybenzyl)-l-methionine) (3), [Ni(HSas)(H₂O)] (4), [Ni₂(Smet)₂(H₂O)₂] (5), and [Ni(HSapg)₂] (H₂Sapg = (N-(2-hydroxybenzyl)-l-aspargine) (6) have been synthesized and characterized by chemical and spectroscopic methods. Structural determination by single crystal X-ray diffraction studies revealed 1D coordination polymeric structures in 2 and 4, and hydrogen-bonded network structure in 5 and 6. In contrast to previously reported coordination compounds with similar ligands, the phenol remains protonated and bonded to the metal ions in 2 and 4, and also probably in 1. However, the phenolic group is non-bonded in 6.     

Five-coordinate cobalt(II) complexes of tris(2-pyridylmethyl)amine (TPA): Synthesis, structural and magnetic characterization of a terephthalato-bridged dinuclear cobalt(II) complex

The cobalt(II) complexes [Co(TPA)Cl]ClO₄ (1), [Co(TPA)Br]ClO₄ (2), [Co(TPA)(H₂O)]Cl(ClO₄) (3) and [Co₂(TPA)₂(μ-tp)](ClO₄)₂ · 2H₂O (4) (TPA = tris(2-methylpyridyl)amine and tp = terephthalate dianion) were synthesized and structurally characterized by UV-vis and IR spectroscopy. The molecular structures of complexes 1 and 4 were determined by X-ray crystallography and their magnetic properties were measured over the temperature range 2-300 K. The coordination geometry around the central Co(II) in these compounds has a distorted trigonal bipyamidal geometry with four nitrogen atoms from the TPA ligand and the fifth coordination site is occupied by Cl⁻ ion in 1, Br⁻ ion in 2, coordinated oxygen atom from H₂O in 3 and by an oxygen atom supplied by the carboxylate group of the bridged terephthalato ligand in 4. The visible spectra of the complexes 1-3 in MeOH show strong distortion toward tetrahedral geometry. For complex 4, analysis of the infrared spectral data for the ν(COO⁻) stretching frequencies of the tp-carboxalato groups reveals the existence of the bis(monodentate) coordination mode for the bridged tp. X-ray data for 1 and 4 show that the former is mononuclear while the latter is dinuclear. The electronic spectrum of 4 in MeOH is in complete agreement with the assigned X-ray geometry around the Co(II) centers. The magnetic behavior of the mononuclear complex 1 is indicative of a high-spin compound with zero-field splitting. The best fit was obtained with ∣D∣ = 7.3 cm⁻¹, g = 2.25. The dinuclear complex 4 exhibits weak antiferromagnetic coupling with a coupling constant J = −0.8 cm⁻¹. The magnetic properties and the structural parameters of 4 are discussed in relation to the other related μ-terephthalato dinuclear Co(II) compounds. The geometry of the coordination sphere around 4 is unique - the CSD compilation listing only one other compound with such a geometry around the dinuclear Co(II) complex and its composition is far different from that in 4. However, they share a common feature of having a weakly antiferromagnetic coupling between Co(II) centers.     

Bis(O2S2 macrocycle) complexes of palladium(II)

Two isomeric dibenzo-O₂S₂ macrocycles L¹ and L² have been synthesised and their coordination chemistry towards palladium(II) has been investigated. Two-step approaches via reactions of 1:1-type complexes, [cis-Cl₂LPd] (1a: L = L¹, 1b: L = L²), with different O₂S₂ macrocycle systems (L¹ and L²) have led to the isolation of the following bis(O₂S₂ macrocycle) palladium(II) complexes in the solid state: [Pd(L¹)₂](ClO₄)₂ (2a) and a mixture of [Pd(L¹)₂](ClO₄)₂ (2a) + [Pd(L²)₂](ClO₄)₂ (2b).     

Bis(acetylacetonato)ruthenium(II) complexes containing bulky tertiary phosphines. Formation and redox behaviour of Ru(acac)2 (PR3) (R = Pr, Cy) complexes with ethene, carbon monoxide, and bridging dinitrogen

Reaction of cis-[Ru(acac)₂(η²-C₈H₁₄)₂] (1) (acac = acetylacetonato) with two equivalents of PⁱPr₃ in THF at −25 °C gives trans-[Ru(acac)₂(PⁱPr₃)₂], trans-3, which rapidly isomerizes to cis-3 at room temperature. The poorly soluble complex [Ru(acac)₂(PCy₃)₂] (4), which is isolated similarly from cis-[Ru(acac)₂(η²-C₂H₄)₂] (2) and PCy₃, appears to exist in the cis-configuration in solution according to NMR data, although an X-ray diffraction study of a single crystal shows the presence of trans-4. In benzene or toluene 2 reacts with PⁱPr₃ or PCy₃ to give exclusively cis-[Ru(acac)₂(η²-C₂H₄)(L)] [L = PⁱPr₃ (5), PCy₃ (6)], whereas in THF species believed to be either square pyramidal [Ru(acac)₂L], with apical L, or the corresponding THF adducts, can be detected by ³¹P NMR spectroscopy. Complexes 3-6 react with CO (1 bar) giving trans-[Ru(acac)₂(CO)(L)] [L = PⁱPr₃ (trans-8), PCy₃ (trans-9)], which are converted irreversibly into the cis-isomers in refluxing benzene. Complex 5 scavenges traces of dinitrogen from industrial grade dihydrogen giving a bridging dinitrogen complex, cis-[{Ru(acac)₂(PⁱPr₃)} ₂(μ-N₂)] (10). The structures of cis-3, trans-4, 5, 6 and 10 · C₆H₁₄ have been determined by single-crystal X-ray diffraction. Complexes trans- and cis-3, 5, 6, cis-8, and trans- and cis-9 each show fully reversible one-electron oxidation by cyclic voltammetry in CH₂Cl₂ at −50 °C with E_1/2(Ru^3+/2+) values spanning −0.14 to +0.92 V (versus Ag/AgCl), whereas for the vinylidene complexes [Ru(acac)₂ (CCHR)(PⁱPr₃)] [R = SiMe₃ (11), Ph (12)] the process is irreversible at potentials of +0.75 and +0.62 V, respectively. The trend in potentials reflects the order of expected π-acceptor ability of the ligands: PⁱPr₃, PCy₃ <C ₂H₄ < CCHR < CO. The UV-Vis spectrum of the thermally unstable, electrogenerated Ru^III-ethene cation 6⁺ has been observed at −50 °C. Cyclic voltammetry of the μ-dinitrogen complex 10 shows two, fully reversible processes in CH₂Cl₂ at −50 °C at +0.30 and +0.90 V (versus Ag/AgCl) corresponding to the formation of 10⁺ (Ru^II,III) and 10²⁺ (Ru^III,III). The former, generated electrochemically at −50 °C, shows a band in the near IR at ca. 8900 cm⁻¹ (w_1/2 ca. 3700 cm⁻¹) consistent with the presence of a valence delocalized system. The comproportionation constant for the equilibrium 10 + 10²⁺ ? 2 10⁺ at 223 K is estimated as 10^13.6.     

Synthesis and characterization of gallium complexes bearing 4-alkyl-2,6-bis(aryliminomethylene)-phenol ligands; crystal structure of dimethyl[4-methyl-2,6-bis-(p-methylphenyliminomethylene)-phenolato]gallium

Eight new dimethylgallium complexes bearing 4-alkyl-2,6-bis(aryliminomethylene)-phenol ligands of type Me₂GaL [L = 4-methyl-2,6-bis-(phenyliminomethylene)-phenolato (3); L = 4-methyl-2,6-bis-(p-methylphenyliminomethylene)-phenolato (4); L = 4-methyl-2,6-bis-(1-naphthyliminomethylene)-phenolato (5); L = 4-methyl-2,6-bis-(2-chlorophenyliminomethylene)-phenolato (6); 4-tert-butyl-2,6-bis-(phenyliminomethylene)-phenolato (7); L = 4-tert-butyl-2,6-bis-(p-methylphenyliminomethylene)-phenolato (8); L = 4-tert-butyl-2,6-bis-(1-naphthyliminomethylene)-phenolato (9); and L = 4-tert-butyl-2,6-bis-(2-chlorophenyliminomethylene)-phenolato] (3) have been synthesized by the reaction of trimethylgallium with appropriate phenol. The complexes obtained have been characterized by elemental analysis, ¹H NMR, IR and mass spectroscopy, respectively. The solid-state structures of dimethyl[4-methyl-2,6-bis-(p-methylphenyliminomethylene)-phenolato]gallium (4) have been determined by X-ray single crystal analysis. In the structure, Ga atom is coordinated by one nitrogen atom and the other nitrogen atom remains constant. The distorted tetrahedron geometry around gallium is presented.     

X-ray powder and single crystal structures of two unprecedented families of bpca-based 1-D magnetic chains (Hbpca = bis(2-pyridylcarbonyl)amine)

Two unprecedented families of bpca-based mono-dimensional complexes Cu(bpca)(X) (X = CN, 1; N₃, 2) and [Cu_1 − xFe_x(bpca)](ClO₄) (x = 0, 3; 0.23, 4) were synthesised. The structure of 1 was solved ab initio from X-ray powder diffraction data and refined by Rietveld methods. The complexes 3-4 were characterised by X-ray single crystal diffraction. In 1 the cyano ligand coordinates the metal centres, the Cu centres forming a zigzag 1-D chain along the (0 0 1) direction, while in 3-4, the bpca ligand itself acts as the link towards the metal ions which are arranged in a linear 1-D chain running parallel to the (0 0 1) direction. An infrared spectroscopy study confirmed these coordination modes. The magnetic properties of both chain families were studied. 1-2 do not show significant magnetic interactions, whereas the magnetic behaviour for 3-4 suggests dominant antiferromagnetic interactions between the metal ions within the chains. The magnetic behaviour of 3 was analysed using the Padé approximation of the Bonner-Fisher model for S = 1/2 antiferromagnetic chains. The J value was estimated as 10 K.     

Three ion-pair complexes containing bis(maleonitriledithiolate)copper(II) anion and substituted 4-dimethylaminopyridinium: Syntheses, crystal structures, and magnetic properties

Three new ion-pair complexes, [4RBzDMAP]₂[Cu(mnt)₂] (mnt²⁻ = maleonitriledithiolate; [4RBzDMAP]⁺ = 1-(4′-R-benzyl)-4-dimethylaminopyridinium, R = F(1), Cl(2) and Br(3)) were synthesized and characterized by elemental analyses, IR, UV, single crystal X-ray diffraction and magnetic measurements. The [Cu(mnt)₂]²⁻ anions and the cations stack alternately and form a 1D column via C-H···S, C-H···π or C-H···Cu interactions for 1 and 2. While the cations stack into a column though π···π or C-H···π interactions between pyridine and phenyl rings for 1 and 3. The change of the molecular topology of the counteraction when the 4-substituted group in the benzyl ring have been changed from F or Cl to Br atom, results in the difference in the crystal system, space group and the stacking mode of the cations and anions of 1, 2 and 3. Some weak hydrogen bonds between the adjacent columns further generate a 3D network structure. It is interesting that 1 and 2 exhibits antiferromagnetic coupling with θ = −2.372 K and θ = −14.732 K, while 3 shows weak ferromagnetic coupling feature with θ = 0.381 K.     

Palladium(II), platinum(II), ruthenium(II) and mercury(II) complexes of potentially tridentate Schiff base ligands of (E, N, O) type (E = S, Se, Te): Synthesis, crystal structures and applications in Heck and Suzuki coupling reactions

Schiff bases of 2-hydroxybenzophenone (HBP) (C₆H₅)(2-HOC₆H₄)CN(CH₂)_nEAr (L1/L2: E = S, Ar = Ph, n = 2/3; L3/L4: E = Se, Ar = Ph, n = 2/3; L5/L6: E = Te, Ar = 4-MeOC₆H₄, n = 2/3) and their complexes [PdCl(L-H)] (L = L1−L6; 1, 2, 3, 5, 7, 11), [PtCl(L3-H/L5-H)] (4/8), [PtCl₂(L4/L6)₂] (6/12), [(p-cymene)RuCl(L5/L6)]Cl (9/13) and [HgBr₂(L5/L6)₂] (10/14) have been synthesized and characterized by proton, carbon-13, selenium-77 and tellurium-125 NMR, IR and mass spectra. Single crystal structures of L1, 1, 3, 4, 5 and 7 were solved. The Pd-E bond distances (Å): 2.2563(6) (E = S), 2.3575(6)−2.392(2) (E = Se); 2.5117(5)−2.5198(5) (E = Te) are near the lower end of the bond length range known for them. The Pt-Se bond length, 2.3470(8) Å, is also closer to the short values reported so far. The Heck and Suzuki reaction were carried out using complexes 1, 3, 5 and 7 as catalysts under aerobic condition. The percentage yields for trans product in Heck reaction were found upto 85%.     

Dinuclear triphenylphosphinegold(I) sulfanylcarboxylates: Synthesis, structure and cytotoxic activity against cancer cell lines

Compounds of the type [(AuPPh₃)₂(xspa)]; H₂xspa [x:p = 3-phenyl-, f = 3-(2-furyl)-, t = 3-(2-thienyl)-, -o-py = 3-(2-pyridyl)-, Clp = 3-(2-chlorophenyl)-, -o-mp = 3-(2-methoxyphenyl)-, -p-mp = 3-(4-methoxyphenyl)-, -o-hp = 3-(2-hydroxyphenyl)-, -p-hp = 3-(4-hydroxyphenyl)-, -diBr-o-hp = 3-(3,5-dibromo-2-hydroxyphenyl)-; spa = 2-sulfanyl propenoato] were synthesized and characterized by IR and NMR (¹H, ¹³C and ³¹P) spectroscopy and by FAB mass spectrometry. The structures of [(AuPPh₃)₂(Clpspa)], [(AuPPh₃)₂(o-hpspa)], [(AuPPh₃)₂(p-hpspa)]·MeOH and [(AuPPh₃)₂(diBr-o-hpspa)]·2Me₂CO show the dinuclear nature of the complexes with the two gold atoms, one of which is also O-bonded to an O atom of the carboxylate group, bonded to the S atom. The in vitro antitumor activities against the HeLa-229, A2780 and A2780cis cell lines were determined and the compounds were found to be highly effective, in particular against the A2780cis cell line, with eight of the nine compounds having IC₅₀ values better than that of cisplatin. This behavior is indicative of a high ability to circumvent the cellular resistance to this drug.