Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Reactions of the fac-[Re(CO)3] and [ReO] moieties with substituted benzothiazoles

The reaction of 2-(2-aminophenyl)benzothiazole (Habt) with [Re(CO)₅Br] led to the isolation of the rhenium(I) complex fac-[Re(Habt)(CO)₃Br] (1). With trans-[ReOCl₃(PPh₃)₂], the ligand Habt decomposed to form the oxofree rhenium(V) complex [Re(itp)₂Cl(PPh₃)] (2) (itp = 2-amidophenylthiolate). From the reaction of trans-[ReOBr₃(PPh₃)₂] with 2-(2-hydroxyphenyl)benzothiazole (Hhpd) the complex [Re^VOBr₂(hpd)(PPh₃)] (3) was obtained. Complexes 1-3 are stable and lipophilic. ¹H NMR and infrared assignments, as well as the X-ray crystal structures, of the complexes are reported.     

Long-range superexchanged magnetic interaction observed in heterometallic complex: {[Fe(Tpms)(CN)3][Mn(H2O)2(DMF)2]} · DMF

A new tri-cyanometalate building block for heterometallic complexes, [PPh₄]₂[Fe^II(Tpms)(CN)₃] (2) (PPh₄ = tetraphenylphosphonium; Tpms = tris(pyrazolyl) methanesulfonate), has been prepared. Using it as a building block, a one-dimensional chain compound, {[Fe^II(Tpms)(CN)₃][Mn^II(H₂O)₂( DMF)₂]} · DMF (3), has been synthesized and structurally characterized. The magnetic properties of 3 correspond to a ferromagnetic chain with weak long-range superexchanged magnetic interaction between the high-spin manganese(II) ions.     

Complexes of N-thiophosphorylthioureas RNHC(S)NHP(S)(OiPr)2 (HL) (R = pyridin-2-yl, pyridin-3-yl, 6-amino-pyridin-2-yl) with copper(I): Crystal structures of Cu(PPh3)nL (n = 1, 2)

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RNHC(S)NHP(S)(OiPr)₂ [R = pyridin-2-yl (HL^a), pyridin-3-yl (HL^b), 6-amino-pyridin-2-yl (HL^c)] with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to mononuclear [Cu(PPh₃)₂L^a,b-S,S′] (1, 2) and [Cu(PPh₃)L^c-S,S′] (3) complexes. Using copper(I) iodide instead of Cu(PPh₃)₃I, polynuclear complexes [Cu_n(L-S,S′)_n] (4-6) were obtained. The structures of these compounds were investigated by IR, ¹H, ³¹P{¹H} NMR spectroscopy, ES-MS and elemental analyses. The crystal structures of Cu(PPh₃)₂L^b (2) and Cu(PPh₃)L^c (3) were determined by single-crystal X-ray diffraction.     

Synthesis and characterization of new AMTTO-imine-ligands and their silver(I) complexes: crystal structures of TAMTTO, [Ag2(TAMMTO)4](NO3)2 · 4MeOH, [Ag(TAMTTO)(PPh3)2]NO3 · 1.5THF, [Ag(FAMTTO)(PPh3)2]NO3

Reaction of 4-amino-6-methyl-1,2,4-triazin-thione-5-one (AMTTO, 1) with 2-thiophenecarboxaldehyde and 2-furaldehyde led to the corresponding iminic compounds 6-methyl-4-[thiophene-2-yl-methylene-amino]-3-thioxo-[1,2,4]-triazin-3,4-dihydro(2H)-5-one (TAMTTO, 2) and 4-[furan-2-yl-methylene-amino]-6-methyl-3-thioxo-[1,2,4]-triazin-3,4-dihydro(2H)-5-one (FAMTTO, 3). Treatment of 2 with AgNO₃ gave the complex [Ag₂(TAMMTO)₄](NO₃)₂ · 4MeOH (4) and of 2 and 3 with [Ag(PPh₃)₂]NO₃ gave the complexes [Ag(TAMTTO)(PPh₃)₂]NO₃ · 1.5THF (5) and [Ag(FAMTTO)(PPh₃)₂]NO₃ (6), respectively. All the compounds have been characterized by elemental analyses, IR spectroscopy and mass spectrometry. Compound 2 and all the complexes have been characterized by X-ray diffraction studies, respectively. In addition, 5 and 6 have been characterized by ³¹P NMR spectroscopy. Crystal data for 2 at −80 °C: monoclinic, space group C2/c, a=2319.6(2), b=609.8(1), c=1673.6(2) pm, β=106.14(1)°, Z=8, R₁=0.0523; for 4 at −80 °C: triclinic, space group , a=877.6(1), b=1085.2(1), c=1557.7(2) pm, α=77.14(1)°, β=80.87(1)°, γ=78.18(1)°, Z=1, R₁=0.0407; for 5 at 20 °C: triclinic, space group , a=1151.1(2), b=1225.1(2), c=1887.4(3) pm, α=78.04(1)°, β=86.20(1)°, γ=76.03(1)°, Z=2, R₁=0.0662; for 6 at −80 °C: triclinic, space group , a=1189.7(2), b=1387.8(2), c=1410.9(2) pm, α=94.74(2)°, β=95.12(2)°, γ=112.41(2)°, Z=2, R₁=0.0511.     

Dioxygen oxidation of a carbonyl ligand to form a chelating peroxycarbonyl ligand: synthesis, structure, and reactions of Cl(NO)(PPh3)2

Reaction between the carbonyl, nitrosyl complex, OsCl(CO)(NO)(PPh₃)₂ (1) and dioxygen results in combination of CO and O₂, forming a chelating peroxycarbonyl ligand in the yellow complex, Cl(NO)(PPh₃)₂ (2). Confirmation of the unique peroxycarbonyl ligand arrangement in 2 is provided by crystal structure determination. When 2 is heated, as a suspension in heptane under reflux, there is a rearrangement to the regular chelating carbonate ligand in the orange complex, Cl(NO)(PPh₃)₂ (3). The structure of 3 has also been determined by X-ray crystallography. Compound 2 also undergoes the following reactions: with water, releasing CO₂ and forming Os(OH)₂Cl(NO)(PPh₃)₂ (4); with HCl releasing CO₂ and forming Os(OH)Cl₂(NO)(PPh₃)₂ (5); and with excess triphenylphosphine releasing CO₂ and triphenylphosphine oxide forming OsCl(NO)(PPh₃)₃ (6).     

Oxidative addition of methyl iodide to [Rh(CO)2I]2: synthesis, structure and reactivity of neutral rhodium acetyl complexes, [Rh(CO)(NCR)(COMe)I2]2

Reaction of [Rh(CO)₂I]₂ (1) with MeI in nitrile solvents gives the neutral acetyl complexes, [Rh(CO)(NCR)(COMe)I₂]₂ (R=Me, 3a; ^tBu, 3b; vinyl, 3c; allyl, 3d). Dimeric, iodide-bridged structures have been confirmed by X-ray crystallography for 3a and 3b. The complexes are centrosymmetric with approximate octahedral geometry about each Rh centre. The iodide bridges are asymmetric, with Rh-(μ-I) trans to acetyl longer than Rh-(μ-I) trans to terminal iodide. In coordinating solvents, 3a forms mononuclear complexes, [Rh(CO)(sol)₂(COMe)I₂] (sol=MeCN, MeOH). Complex 3a reacts with pyridine to give [Rh(CO)(py)(COMe)I₂]₂ and [Rh(CO)(py)₂(COMe)I₂] and with chelating diphosphines to give [Rh(Ph₂P(CH₂)_nPPh₂)(COMe)I₂] (n=2, 3, 4). Addition of MeI to [Ir(CO)₂(NCMe)I] is two orders of magnitude slower than to [Ir(CO)₂I₂]⁻. A mechanism for the reaction of 1 with MeI in MeCN is proposed, involving initial bridge cleavage by solvent to give [Rh(CO)₂(NCMe)I] and participation of the anion [Rh(CO)₂I₂]⁻ as a reactive intermediate. The possible role of neutral Rh(III) species in the mechanism of Rh-catalysed methanol carbonylation is discussed.     

A rare example of a di-cationic hydrido carbonyl tetra-nuclear cluster, [H2Rh2Pt2(CO)7(PPh3)3]

Addition of excess CF₃CO₂H (HTFA) to [Rh₂Pt₂(CO)₇(PPh₃)₃], I, under nitrogen results in the formation of a salt (X²⁺ Y²⁻), which contains only the second example of a di-cationic carbonyl hydride tetra-nuclear cluster, [H₂Rh₂Pt₂(CO)₇(PPh₃)₃]²⁺, X²⁺, and a presently partially characterized polymetallic anion Y²⁻. The di-cation X²⁺ has been characterized by mass spectrometry and a variety of multinuclear NMR methods. Since there is no difference in the electron count for I and X²⁺, it is probable that both I and X²⁺ adopt similar butterfly metallic frameworks with a Rh-Rh hinge; in X²⁺, there are two bridging hydrides to the same wing-tip Pt but the phosphine site occupancies on the Rh₂Pt₂-framework in I and X²⁺ are different.     

Quantification of cis and trans influences in [PtX(PPh3)3] complexes. A P NMR study

In [PtX(PPh₃)₃]⁺ complexes (X = F, Cl, Br, I, AcO, NO₃, NO₂, H, Me) the mutual cis and trans influences of the PPh₃ groups can be considered constants in the first place, therefore the one bond Pt-P coupling constants of P_(cis) and P_(trans) reflect the cis and trans influences of X. The compounds [PtBr(PPh₃)₃](BF₄) (2), [PtI(PPh₃)₃](BF₄) (3), [Pt(AcO)(PPh₃)₃](BF₄) (4), [Pt(NO₃)(PPh₃)₃](BF₄) (5), and the two isomers [Pt(NO₂-O)(PPh₃)₃](BF₄) (6a) and [Pt(NO₂-N)(PPh₃)₃](BF₄) (6b) have been newly synthesised and the crystal structures of 2 and 4·CH₂Cl₂·0.25C₃H₆O have been determined. From the ¹J_PtP values of all compounds we have deduced the series: I > Br > Cl > NO₃ > ONO > F > AcO > NO₂ > H > Me (cis influence) and Me > H > NO₂ > AcO > I > ONO > Br > Cl > F > NO₃ (trans influence). These sequences are like those obtained for the (neutral) cis- and trans-[PtClX(PPh₃)₂] derivatives, showing that there is no dependence on the charge of the complexes. On the contrary, the weights of both influences, relative to those of X = Cl, were found to depend on the charge and nature of the complex.     

Equilibrium, solid state behavior and reactions of four and five co-ordinate carbonyl stibine complexes of rhodium. Crystal Structures of trans-[Rh(Cl)(CO)(SbPh3)2], trans-[Rh(Cl)(CO)(SbPh3)3] and trans-[Rh(I)2(CH3)(CO)(SbPh3)2]

The crystal structures of the four-coordinate trans-[Rh(Cl)(CO)(SbPh₃)₂] (1) and the five-coordinate trans-[Rh(Cl)(CO)(SbPh₃)₃] (2) are reported, as well as the unexpected oxidative addition product, trans-[Rh(I)₂(CH₃)(CO)(SbPh₃)₂] (3), obtained from the reaction of 2 with CH₃I. The formation constants of the five-coordinate complex were determined in dichloromethane, benzene, diethyl ether, acetone and ethyl acetate as 163±8, 363±10, 744±34, 1043±95 and 1261±96 M⁻¹, respectively. While coordinating solvents facilitate the formation of the five-coordinate complex, the four-coordinate complex could be obtained from diethyl ether due to the favorable low crystallization energy. The tendency of stibine ligands to form five-coordinate rhodium(I) complexes is attributed mainly to electron deficient metal centers in these systems, with smaller contributions by the steric effects. The average effective cone angle for the SbPh₃ ligand in the three crystallographic studies was determined as 139° with individual values ranging from 133 to 145°.     

Sn-S and Ru-Ru bonds cleavage reactions between [Ph3SnS(CH2)3SSnPh3] and Ru3(CO)12: X-ray crystal structures of [Ph3SnS(CH2)3SSnPh3] and trans-[Ru(CO)4(SnPh3)2]

The organotin complex [Ph₃SnS(CH₂)₃SSnPh₃] (1) was synthesized by PdCl₂ catalyzed reaction between Ph₃SnCl and disodium-1,3-propanedithiolate which in turn was prepared from 1,2-propanedithiol and sodium in refluxing THF. Reaction of 1 with Ru₃(CO)₁₂ in refluxing THF affords the mononuclear complex trans-[Ru(CO)₄(SnPh₃)₂] (2) and the dinuclear complex [Ru₂(CO)₆(μ-κ²-SCH₂CH₂CH₂S)] (3) in 20 and 11% yields, respectively, formed by cleavage of Sn-S bond of the ligand and Ru-Ru bonds of the cluster. Treatment of pymSSnPPh₃ (pymS = pyrimidine-2-thiolate) with Ru₃(CO)₁₂ at 55-60 °C also gives 2 in 38% yield. Both 1 and 2 have been characterized by a combination of spectroscopic data and single crystal X-ray diffraction analysis.     

New aryl phosphinite ligands avoiding ortho-metallation: Synthesis and molecular structures of trans-[PdCl2(PPh2OR)2] and trans-[Rh(CO)Cl(PPh2OR)2] (R = 2,4,6-Me3C6H2; 2,6-Ph2C6H3)

The new aryl phosphinites PPh₂OR (R = 2,4,6-Me₃C₆H₂, 1; R = 2,6-Ph₂C₆H₃, 2) have been prepared from chlorodiphenylphosphine and the corresponding phenols. In these ligands, the ortho-positions of the aromatic phosphite function are blocked by methyl and phenyl substituents, which allows coordination to metal centres without ortho-metallation. Thus, reaction with [PdCl₂(cod)] leads to the complexes trans-[PdCl₂(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 3; R = 2,6-Ph₂C₆H₃, 4), while the reaction with [Rh₂(CO)₄Cl₂] gives trans-[Rh(CO)Cl(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 5; R = 2,6-Ph₂C₆H₃, 6). The single-crystal X-ray structure analyses of 3 and 5 confirm the trans-coordination of the new ligands in these square-planar complexes.     

O-Alkylthio- and O-alkylselenooxalate iron complexes: Structures of CpFe(CO)2ECOCO2Me and [CpFe(CO)2ECO]2

When the iron sulfide complexes (μ-S_x)[CpFe(CO)₂]₂ (x = 2, 3) are treated with O-alkyl oxalyl chlorides ROCOCOCl the complexes CpFe(CO)₂SCOCO₂R (1) [R = Me (a), Et (b)] are obtained. Similarly, the complexes CpFe(CO)₂SeCOCO₂R (2) are obtained from the analogous iron selenide (μ-Se)[CpFe(CO)₂]₂ reaction with the same reagents. Treatment of the iron selenide with half equivalent of oxalyl chloride produces the dimeric complex [CpFe(CO)₂SeCO]₂ (3). The new complexes, 1, 2 and 3, have been characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of 1a, 2a, 3 and [CpFe(CO)₂SCO]₂ (4) were determined by an X-ray crystal structure analysis.     

Synthetic and mechanistic studies on ruthenium dicarbonyl complexes containing PhP(CH2CH2CH2PCy2)2 (Cyttp) ligand

A synthetic and mechanistic study is reported on ligand substitution and other reactions of six-coordinate ruthenium(II) carbonyl complexes containing tridentate PhP(CH₂CH₂CH₂PCy₂)₂ (Cyttp). Carbonylation of cis-mer-Ru(OSO₂CF₃)₂(CO)(Cyttp) (1) affords [cis-mer-Ru(OSO₂CF₃)(CO)₂(Cyttp)]O₃SCF₃ (2(O₃SCF₃)) and, on longer reaction times, [cis-mer-Ru(solvent)(CO)₂(Cyttp)](O₃SCF₃)₂ (solvent = acetone, THF, methanol). 2(O₃SCF₃) reacts with each of NaF, LiCl, LiBr, NaI, and LiHBEt₃ to yield [cis-mer-RuX(CO)₂(Cyttp)]⁺ (X = F (3), Cl (4), Br (5), I (6), H (7)), isolated as 3-7(BPh₄). These conversions proceed with high stereospecificity to afford only a single isomer of the product that is assigned a structure in which the Ph group of Cyttp points toward the CO trans to X (anti when X = F, Cl, Br, or I; syn when X = H). Treatment of 2(O₃SCF₃) with NaOMe and CO generates the methoxycarbonyl complex [cis-mer-Ru(CO₂Me)(CO)₂(Cyttp)]⁺ (8), whereas addition of excess n-BuLi to 2(O₃SCF₃) in THF under CO affords mer-Ru(CO)₂(Cyttp) (9). The two ¹³C isotopomers [cis-mer-Ru(OSO₂CF₃)(CO)(¹³CO)(Cyttp)]O₃SCF₃ (2′(O₃SCF₃): ¹³CO trans to P_C; 2″(O₃SCF₃): ¹³CO cis to all P donors) were synthesized by appropriate adaptations of known transformations and used in mechanistic studies of reactions with each of LiHBEt₃, NaOMe/CO, and n-BuLi. Whereas LiHBEt₃ reacts with 2′(O₃SCF₃) and 2″(O₃SCF₃) to replace triflate by hydride without any scrambling of the carbonyl ligands, the corresponding reactions of NaOMe-CO are more complex. The methoxide combines with the CO cis to triflate in 2, and the resultant methoxycarbonyl ligand ends up positioned trans to the incoming CO in 8. A mechanism is proposed for this transformation. Finally, treatment of either 2′(O₃SCF₃) or 2″(O₃SCF₃) with an excess of n-BuLi leads to the formation of the same two ruthenium(0) isomers of mer-Ru(CO)(¹³CO)(Cyttp). These products represent, to our knowledge, the first example of a syn-anti pair of isomers of a five-coordinate metal complex.     

Kinetics study of the substitution reaction of fac-[Fe(CN)2(CO)3I] with PPh3

Substitution reaction of fac-[Fe^II(CN)₂(CO)₃I]⁻ with triphenylphosphine (PPh₃) produced mono phosphine substituted complex cis-cis-[Fe^II(CN)₂(CO)₂(PPh₃)I]⁻. Crystal structure of the product showed that carbonyl positioned trans- to iodide was replaced by PPh₃. The substitution reaction was monitored by quantitative infrared spectroscopic method, and the rate law for the substitution reaction was determined to be rate = k[[Fe^II(CN)₂(CO)₂(PPh₃)I]⁻][PPh₃]. Transition state enthalpy and entropy changes were obtained from Eyring equation k = (k_BT/h)exp(−ΔH^≠/RT + ΔS^≠/R) with ΔH^≠ = 119(4) kJ mol⁻¹ and ΔS^≠ = 102(10) J mol⁻¹ K⁻¹. Positive transition state entropy change suggests that the substitution reaction went through a dissociative pathway.     

Syntheses, reactions, and structures of osmium(II) stannyl complexes with the simple stannyl ligands SnH3, SnH2Me, and SnHMe2

Reaction between Os(SnI₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ and NaBH₄ produces the unusual, air-stable, trihydridostannyl complex, Os(SnH₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (1), which has been fully characterised including by X-ray crystal structure determination.Similarly, reaction between Os(SnI₂Me)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ or Os(SnClMe₂)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ and NaBH₄ produces the dihydridostannyl complex, Os(SnH₂Me)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (4) or the monohydridostannyl complex, Os(SnHMe₂)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (6), respectively.The SnH bonds in these complexes are reactive towards acids and in selected reactions complexes 1 and 4 with aqueous HF give Os(SnF₃)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (3) and Os(SnF₂Me)(κ²-S₂CNMe₂)(CO)(PPh₃)₂ (5), respectively, and complex 6 with aqueous HCl gives Os(SnClMe₂)(κ²-S₂CNMe₂)(CO)(PPh₃)₂.The trihydridostannyl complex 1 reacts with chloroform to form the trichlorostannyl complex, Os(SnCl₃)(κ²- S₂CNMe₂)(CO)(PPh₃)₂ (2). The crystal structures of 1-3, 5, and 6 have been determined.     

Hydrogen bonding: further evidence for the cause of the color change of nitrosylpentaamminechromium (III) compounds. Crystal structures of [Cr(NO)(NH3)5](PF6)2 and [Cr(NO)(NH3)5]Cl(PF6)

The crystal structures of [Cr(NO)(NH₃)₅](PF₆)₂ (red) and [Cr(NO)(NH₃)₅]Cl(PF₆) (brown) have been determined. The [Cr(NO)(NH₃)₅]²⁺(A) complex cations in these compounds have a slightly distorted octahedral geometry with a strictly linear Cr-N-O arrangement (from symmetry). The short interatomic distances (2.399 Å × 4) between the O (nitrosyl) and H (ammonia in adjacent complex cations) atoms in A(PF₆)₂ indicate the existence of hydrogen bonds, while the interatomic distances (3.258 Å × 8) between those in ACl(PF₆) are much longer, and the hydrogen bonds should be weak in spite of the presence of the smaller counter anion of chloride ion in ACl(PF₆). Comparisons of the five crystal structures of A(PF₆)₂, ACl₂, ACl(ClO₄), ACl(PF₆), and A(ClO₄)₂ have led to the conclusion that the existence of the strong hydrogen bonds gives red crystals of A(PF₆)₂, while the absence of hydrogen bonds results in the formation of green crystals of A(ClO₄)₂ (O ? H, 3.595 Å × 2). The color change of the crystals (from red to green) with the change of outer sphere anions is attributed to the change of the strength of the hydrogen bonding between the complex cations.     

Antisymbiosis. Preferential coordination of anionic oxygen versus neutral sulfur donor atoms of methylsulfanyl- or methylsulfinyl-acetato, 2-benzoato and 2-phenolato to the cis-Pt(PPh3)2 and Pt(dppe) residues

The interaction of an excess of the title ligands L⁻ with the cis-Pt(phos)₂ moieties gives compounds a-bcis-[Pt(L-O)₂(phos)₂] (a, phos = P(Ph)₃; b, phos = 1/2 dppe), in which O- is preferred to S-coordination. Such preference is confirmed by the fact that the same products are obtained by reaction of excess of L⁻ with the previously reported a-d complexes [Pt(L-O,S)(phos)₂]⁺, (c, phos = PPh₃, d, phos = 1/2 dppe), for which chelate ring opening occurs with rupture of Pt-S rather than Pt-O bonds. Compound a can be obtained also by oxidative addition of HL to [Pt(PPh₃)₃]. The Pt-O bonds in compounds a-d are stable towards substitution by Me₂SO, pyridine and tetramethylthiourea. Substitution of L’s occurs with N,N′-diethyldithiocarbamate, which forms a very stable chelate with Pt(II). Thiourea and N,N′-dimethylthiourea also react, because they give rise to cyclometallated products [Pt(phos)₂(NRC(S)NHR)]⁺ (R = H, CH₃), with one ionised thioamido group, as revealed by an X-ray investigation of [Pt(PPh₃)₂(NHC(S)NH₂)]⁺. The preference of O versus S coordination, as well as the stability of the Pt-O bonds, are discussed in terms of antisymbiosis.     

Synthesis and characterization of three group 10 complexes containing nido-carborane diphosphine: [MCl(PPh3){7,8-(PPh2)2-7,8-C2B9H10}] (M = Ni, Pd, Pt)

Three group 10 complexes containing nido-carborane diphosphine, [NiCl(PPh₃){7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}] (1), [PdCl(PPh₃){7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}] · 1.25CH₂Cl₂ (2) and [PtCl(PPh₃){7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}] · 2.5CH₂Cl₂ (3) have been synthesized by the reactions of [M(PPh₃)₂Cl₂] (M = Ni, Pd, Pt) with closo carborane diphosphine 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ in ethanol. For complex 3, it could also be obtained under solvothermal condition. All three complexes were characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopy and X-ray structure determination. Single crystal structures show that their structures are similar to each other. In each complex, the nido [7,8-(PPh₂)₂-7,8-C₂B₉H₁₀]⁻, which resulted from the degradation of the initial closo ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ during the reaction process, was coordinated bidentately through the P atoms to M(II) ion, and this resulted in a stable five-membered chelating ring between the bis-diphosphine ligand and the metal. The coordination mode of the metal can be described as a slightly distorted square-planar, in which the remaining two positions were occupied by one Cl⁻ and one PPh₃ group.     

Syntheses and structures of the heterometallic clusters [(Ph3PAu)3Re(CO)4], [(Ph3PAu)4Re(CO)4], [(Ph3PAu)6AuRe2(CO)8], and [(Ph3PAu)6Re(CO)3]

The reaction of [HRe₃(CO)₁₂]²⁻ with an excess of Ph₃PAuCl in CH₂Cl₂ yields [(Ph₃PAu)₄Re(CO)₄]⁺ as the main product, which crystallizes as [(Ph₃PAu)₄Re(CO)₄]PF₆ · CH₂Cl₂ (1 · CH₂Cl₂) after the addition of KPF₆.The crystal structure determination reveals a trigonal bipyramidal Au₄Re cluster with the Re atom in equatorial position.If [(Ph₃PAu)₄Re(CO)₄]⁺ is reacted with PPh₄Cl, a cation [Ph₃PAu]⁺ is eliminated as Ph₃PAuCl, and the neutral cluster [(Ph₃PAu)₃Re(CO)₄] (2) is formed.It combines with excess [(Ph₃PAu)₄Re(CO)₄]⁺ to afford the cluster cation, [(Ph₃PAu)₆AuRe₂(CO)₈]⁺. It crystallizes from CH₂Cl₂ as[(Ph₃PAu)₆AuRe₂(CO)₈]PF₆ · 4CH₂Cl₂ (3 · 4CH₂Cl₂). In [(Ph₃PAu)₃Re(CO)₄] the metal atoms are arranged in form of a lozenge while in [(Ph₃PAu)₆AuRe₂(CO)₈]⁺ two Au₄Re trigonal bipyramids are connected by a common axial Au atom.The treatment of [(Ph₃PAu)₄Re(CO)₄]⁺ with KOH and Ph₃PAuCl in methanol yields the cluster cation [(Ph₃PAu)₆Re(CO)₃]⁺, which crystallizes with from CH₂Cl₂ as [(Ph₃PAu)₆Re(CO)₃]PF₆ · CH₂Cl₂ (4 · CH₂Cl₂). The metal atoms in this cluster form a pentagonal bipyramid with the Re atom in the axial position.