The structural definition of adducts of stoichiometry AgX:dppf (1:1)(n), X = simple anion, dppf = bis(diphenylphosphino)ferrocene

Single crystal X-ray structural characterizations are recorded for an array of adducts of the form AgX:dppf (1:1)_(n), X = simple (pseudo-)halide or oxy-anion, ‘dppf’ = bis(diphenyl phosphino)ferrocene, for adducts X = Cl (new phase), Br, I, SCN, OCN, CN, NO₃ (new phase), O₂CCH₃, n = 2, the form being dimeric [(dppf-P,P′)Ag(μ-X)₂Ag(P,P′-dppf)], for X = I, SCN, [Ag(μ-X)₂(P-dppf-P′)₂Ag′]; for X = O₂CCF₃, n = ∞, the form is an extended polymer: ?Ag(O · CO · CF₃)(P-dppf-P′)Ag′(O?. A dichloromethane solvate phase of CuI:dppf (1:1)₂ (also centrosymmetric) is also recorded. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR). The topology of the structures in the solid state was found to depend on the nature of the counterion.     

The structural definition of adducts of stoichiometry MX:dpex (2:3)(∞), M = Cu, Ag, X = simple anion, dpex = Ph2E(CH2)xEPh2, E = P, As

Single crystal X-ray structural characterizations are recorded for a number of adducts of MX:dpex (2:3) stoichiometry (MX = simple univalent copper or silver salt; dpex = Ph₂E(CH₂)_xEPh₂ (E = P, As)). CuX:dppe (2:3) (X = Cl, Br, I, CN) are binuclear [(dppe-P,P′)CuX(P-dppe-P′)CuX(P,P′-dppe)], all centrosymmetric. AgX:dpex (2:3) (dpex = ‘dpae’ (Ph₂As(CH₂)₂AsPh₂), X = Br, F₃CCO₂ (= ‘tfa’), F₃CSO₃ (≡ ‘tfs’); dpex = ‘dpape’ (Ph₂As(CH₂)₂PPh₂), X = CN, SCN, OClO₃) are one-dimensional polymers ?-E′)₁AgX(E-dpex-E′)₂-AgX(E-dpex-E′)₁AgX?, P, As sites scrambled in the latter. AgNO₃:dpam (2:3) is also a one-dimensional polymer, ?AgO·NO·OAg(As-dpam-As)AgO·NO·OAg? (‘dpam’ ≡ Ph₂As(CH₂)₂AsPh₂). AgX:dpae (2:3) (X = I, CN, ClO₄, NO₃) and AgX:dpape (2:3) (X = Br, I, NO₃) are two-dimensional polymers with large 30-membered macrocyclic rings; similar webs are found for dppx ligands in AgOH:dppb (2:3) and AgNCO, Agtfa:dpph (2:3) with 42- and 54-membered rings. Complexes AgX:dpape (1:3) (X = Cl, Br) are defined as mono-nuclear [XAg(Ph₂P(CH₂)₂AsPh₂)₃] arrays, the unidentate ligands predominantly P-bound. Synthetic procedures for the adducts are reported, selected compounds being characterized both in solution (¹H, ³¹P NMR, ESI MS) and in the solid state (IR).     

Syntheses and structures of some adducts of silver(I) oxyanion salts with some 2-N,O-donor-substituted pyridine bases

Syntheses and room-temperature single crystal X-ray structural characterizations are recorded for a variety of silver(I) oxyanion (perchlorate, nitrate and trifluoroacetate (‘tfa’) (increasing basicity)) adducts, AgX, with a number of pyridine (‘py’) bases, L, functionalized in the 2-position with N- or O-donor groups, namely 2-amino-, 2-amino-6-methyl-, 2-aminomethyl-, 2-hydroxy-, 2-methoxy- and 2-acetyl- pyridines, ‘2np’, ‘nmp’, ‘amp’, ‘ohp’, ‘mop’, and ‘acp’. A variety of stoichiometries and associated structural types are defined: [Ag(chelate)₂]X, L/X = amp,acp/ClO₄, [XAg(chelate)₂], L/X = acp/tfa, of 1:2 AgX:L stoichiometry; for 1:1 stoichiometry, although a discrete mononuclear complex [(chelate)Ag(O₂NO)] is defined for AgNO₃: acp (1:1), all others are polymers, successive silver atoms being linked by N,N′-bridging ligands singly (L/X = 2np/ClO₄ (?HAgHTAgTHAgH?), amp/ClO₄, NO₃ (?HTAgHTAg?) (‘H’ ≡ head, ‘T’ = tail)) or pairwise, ?L₂AgX₂AgL₂Ag? (L/X = 2np/tfa, nmp/NO₃). More complex polymeric arrays are found with L/X = ohp/NO₃, tfa, where interaction with the metal takes place via the O-donor only, the py functionality being protonated, and in adducts of more complex stoichiometry AgNO₃:mop (2:3) and AgNO₃:2np (3:4).     

Synthesis and structural characterization of the adducts of silver(I) perchlorate and nitrate with triphenylphosphine and bis(pyrazolyl)methane ligands of 1:1:1 stoichiometry

Six new adducts of the form AgX:PPh₃:H₂C(pz^x)₂ (1:1:1) (H₂C(pz^x)₂ = H₂C(pz)₂ = bis(pyrazolyl)methane or H₂C(pz^Me2)₂ = bis(3,5-dimethylpyrazolyl)methane; X = ClO₄, NO₃, SO₃CF₃) have been synthesized and characterized by analytical, spectroscopic (IR, far-IR, ¹H and ³¹P NMR) and two of them also by single crystal X-ray diffraction studies for comparison with counterpart adducts with 2,2′-bipyridyl (‘bpy’) derivatives reported in a previous paper, the bpy-derived ligands forming five-membered chelate rings, while the present H₂C(pz^x)₂ should, potentially, form six-membered rings. Such is the case, the two adducts exhibiting quasi-planar N₂AgP coordination environments, perturbed by the approach of the oxyanion, unidentate in the case of the perchlorate but, in the case of the nitrate, an interesting disordered aggregate of differing unidentate modes.     

Preparation and characterization of manganese(III) halide derivatives of N,N′-bis(aminobenzylidene)-1,2-ethanediamine

The preparation and characterization of manganese(III) complexes containing the quadridenate ligand, N,N′-bis(aminobenzylidene)-1,2-ethanediamine (H₂amben), and its previously unreported analogue, N,N′-bis(2-amino-5-nitro-benzylidene)-1,2-ethanediamine (H₂nitroamben), are described. The new manganese(III) halide/pseudohalide complexes, Mn(amben)X · nH₂O and Mn(nitroamben)X · nH₂O (X = Cl, Br, I, NCS; n =  0.5 or 1), were isolated as red-brown, microcrystalline solids, which were characterized fully.     

1,10-Phenanthroline-5,6-dione complexes of middle transition elements: Mono- and dinuclear derivatives

The synthesis and the characterization of several mono- and dinuclear middle transition metal derivatives of 1,10-phenanthroline-5,6-dione, 1, are presented. The reaction of 1 with CrCl₂(THF)₂ gives CrCl₂(O,O′-C₁₂H₆N₂O₂)(THF)₂, 2, while the halides of iron(II), cobalt(II) and nickel(II) afford adducts of general formula MX₂(N,N′-C₁₂H₆N₂O₂), M = Fe, 4, Co, 5, X = Cl; M = Ni, 6, X = Br. DFT calculations on CrCl₂(L)(THF)₂ with L = O,O′-C₁₂H₆N₂O₂ or O,O′-C₁₄H₈O₂ allowed a direct comparison of the coordination properties of 9,10-phenanthrenequinone and 1,10-phenanthroline-5,6-dione to be made. Dinuclear compounds of general formula CrCl₂(THF)₂(O,O′-C₁₂H₆N₂O₂-N,N′)MX_nL_m, M = Zr, 7, X = Cl, n = 4, m = 0; M = Cr, 8, X = Cl, n = 2, L = THF, m = 2; M = Fe, 9, Co, 10, X = Cl, n = 2, m = 0; M = Ni, 11, X = Br, n = 2, m = 0, are prepared from 2 and the corresponding metal halide, while VCp₂(O,O′-C₁₂H₆N₂O₂-N,N′)FeCl₂, 12, is synthesized by reacting 4 with VCp₂. The electronic properties of the different complexes are investigated by magnetic moment measurements and EPR spectroscopy.     

Oxidative addition of mercury(II) halides and carboxylates to platinum(II): formation of Pt-Hg covalent and donor-acceptor bonds

The complex [PtMe₂(bu₂bpy)], 1, bu₂bpy = 4,4′-di-t-butyl-2,2′-bipyridine reacts with mercury(II) halides HgX₂ (X = Cl, Br, O₂CCF₃, O₂CMe) to give the corresponding complexes [PtMe₂X(HgX)(bu₂bpy)], 2, by trans oxidative addition followed, when X = O₂CCF₃, O₂CMe only, by easy isomerization to the cis isomers 3. The complexes 2 or 3 react with complex 1 to give the corresponding adducts [PtMe₂X(bu₂bpy)(μ-HgX)PtMe₂X(bu₂bpy)], 4, which are shown to contain both covalent and donor-acceptor Pt-Hg bonds in the solid state, and which exhibit very easy fluxionality in solution.     

From infinite tubular arrays to discrete molecules and back: An example of reversible ring-opening polymerization in silver(I)-diphosphazane chemistry

The reaction of AgX with the diphosphazane ligand, PrⁱN(PPh₂)₂ (L) gives the polymeric complexes, [Ag₂(μ-X)₂(μ-L)]_n (X = NO₃1a or OSO₂CF₃1b). Single crystal X-ray analysis of 1a reveals a novel structural motif formed by interlinking of giant 40-membered rings; the diphosphazane ligand L adopts a unique ‘C_s’ geometry. These polymeric complexes exhibit a completely reversible ring-opening polymerization-depolymerization relationship with the dinuclear and mononuclear complexes, [{Ag(μ-L)(X)}₂] (X = NO₃2a, X = OSO₂CF₃2b) and [Ag(κ²-L)₂]X (X = NO₃3a, X = OSO₂CF₃3b).     

Syntheses and structures of adducts of stoichiometry MX:dpex (2:1)(n), M = Cu, Ag, X = (pseudo-) halogen, dppx = Ph2E(CH2)xEPh2, E = P, As

Single crystal X-ray studies have defined the structures of a number of adducts of the form MX:dpex (2:1), M = univalent coinage metal (Cu, Ag), X = (pseudo-)halide, dpex = bis(diphenylpnicogeno)alkane, Ph₂E(CH₂)_xEPh₂, E = P, As, of diverse types, some novel. The adducts of AgCl,Br:dppm and AgNCO:dpem (x = 1) are tetranuclear as is the AgNO₃:dppp (x = 3) array, all derivative of the familiar ‘step’ structure while the combination CuCN:dppm yields a two-dimensional web of twenty-membered macro/metallacycles. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR).     

Synthesis, characterization, and aqueous chemistry of cytotoxic Au(III) polypyridyl complexes

This work reports the synthesis, characterization, and aqueous chemistry of a series of cytotoxic [Au(polypyridyl)Cl₂]PF₆ complexes {(where polypyridyl = dipyrido[3,2-f:2′,3′-h] quinoxaline (DPQ), dipyrido[3,2-a:2′,3′-c] phenazine (DPPZ) and dipyrido[3,2-a:2′,3′-c](6,7,8,9-tetrahydro) phenazine (DPQC))}. The crystal structure of [Au(DPQ)Cl₂]PF₆ was determined as example of the series and exhibits the anticipated square planar geometry common for d⁸ coordination complexes. The crystals of the complex belong to the space group P2₁/n with a = 7.624(2) Å, b = 18.274(5) Å, c = 14.411(14) Å, β = 98.03(3)°, and Z = 4. In ¹H NMR studies of these compounds in the presence of aqueous buffer, all four complexes rapidly converted to the dihydroxy species [Au(polypyridyl)(OH)₂] in a stepwise fashion. However, the [Au(polypyridyl)]³⁺ fragment believed to impart cytotoxicity in human ovarian cancer cell lines (A2780) remained intact and appeared stable for days. It was also noted that these Au(III) complexes were readily reduced in the presence of the common biological reducing agents, reduced glutathione and sodium ascorbate. How solution and redox stability may affect the biological activity of these novel Au(III) complexes is discussed.     

Synthesis, spectroscopy and structural characterization of silver(I) complexes containing unidentate N-donor azole-type ligands

From the interaction between azole-type ligands L and AgX (X = NO₃ or ClO₄) or [AgX(PPh₃)_n] (X = Cl, n = 3; X = MeSO₃, n = 2), new ionic mononuclear [Ag(L)₂]X and [Ag(PPh₃)₃L][X] or neutral mono-([Ag(PPh₃)_nL(X)]) or di-nuclear ([{Ag(PPh₃)(L)(μ-X)}₂]) complexes have been obtained which have been characterized through elemental analysis, conductivity measurements, IR, ¹H NMR and, in some cases, also by ³¹P{¹H} NMR spectroscopy, and single-crystal X-ray studies. Stoichiometries and molecular structures are dependent on the nature of the azole (steric hindrance and basicity), of the counter ion, and on the number of the P-donor ligands in the starting reactants. Solution data are consistent with partial dissociation of the complexes, occurring through breaking of both Ag-N and Ag-P bonds.     

Enhanced DNA photocleavage properties of Ru(II) terpyridine complexes upon incorporation of methylphenyl substituted terpyridine and/or the polyazine bridging ligand dpp (2,3-bis(2-pyridyl)pyrazine)

The heteroleptic complexes, [(MePhtpy)RuCl(dpp)](PF₆) and [(tpy)RuCl(dpp)](PF₆), have been synthesized, characterized, and investigated with respect to their photophysical, redox, and DNA photocleavage properties (where MePhtpy = 4′-(4-methylphenyl)-2,2′:6′,2′′-terpyridine and dpp = 2,3-bis(2-pyridyl)pyrazine, tpy = 2,2′:6′,2′′-terpyridine). The X-ray crystal structure confirms the identity of the new [(MePhtpy)RuCl(dpp)](PF₆) complex. These heteroleptic complexes were found to photocleave DNA in the presence of oxygen, unlike the previously studied complex, [Ru(tpy)₂](PF₆)₂. The photophysical, redox, and DNA photocleavage properties of the heteroleptic complexes were compared with those of the homoleptic complexes, [Ru(MePhtpy)₂](PF₆)₂ and [Ru(tpy)₂](PF₆)₂. The heteroleptic complexes showed intense metal to ligand charge transfer (MLCT) transition at lower energy ([(MePhtpy)RuCl(dpp)](PF₆), 522 nm; [(tpy)RuCl(dpp)](PF₆), 516 nm) and longer excited state lifetimes as compared to the homoleptic complexes. The [Ru(MePhtpy)₂]²⁺ complex was found to photocleave DNA in contrast to [Ru(tpy)₂]²⁺. The introduction of a methylphenyl group on the tepyridine ligand not only enhances the ³MLCT excited state lifetime but also increases the lipophilicity and thereby the DNA binding ability of the molecule. An increase in lipophilicity upon addition of a methylphenyl group on the 2,2′:6′,2′′-terpyridine ligand was confirmed by determination of the partition coefficient ([(MePhtpy)RuCl(dpp)](PF₆), log P = +1.16; [(tpy)RuCl(dpp)](PF₆), log P = −1.27). The heteroleptic complexes photocleave DNA more efficiently than the homoleptic complexes, with the greatest activity being observed for the newly prepared [(MePhtpy)RuCl(dpp)](PF₆) complex.     

Transition metal halide salts of 8-methylquinolinium: Synthesis and structures of (8-methylquinolinium)2 MX4·nH2O (M = Cu, Co, Zn; X = Cl, Br; n = 0, 1)

The reactions of metal(II) chlorides and bromides with 8-methylquinoline (8-mequin) in neutral and acidic solutions were investigated. The reaction with ZnCl₂, ZnBr₂, CoCl₂, CoBr₂, CuCl₂ or CuBr₂ with the appropriate HX in water or aqueous ethanol gave complexes of the formula (8-mequin)₂MX₄ (1, M = Cu, X = Cl; 2, M = Cu, X = Br; 3, M = Co, X = Cl; 4, M = Co, X = Br) or (8-mequin)₂ZnX₄·nH₂O (5, X = Cl, n = 0; 6, X = Br, n = 0; 7, X = Cl, n = 1; 8, X = Br, n = 1). Crystals of 1, 2 and 4-8 suitable for single crystal X-ray diffraction were obtained and the structures reported. Compounds 1 and 2 crystallize in the monoclinic space group C2/c, while 4-8 crystallize in the triclinic space group, . Variable temperature magnetic susceptibility data indicate very weak interactions for the copper compounds 1 and 2, while the magnetic behavior of 3 and 4 is dominated by single ion anisotropy, with weaker antiferromagnetic interactions.     

A new tris(2-furyl) substituted pyrazolylborate ligand and its zinc complex chemistry

The new ligand hydrotris(3-(2′-furyl)-5-methylpyrazolyl)borate (Tp^Fu,Me) was prepared by the usual procedure. With zinc salts, it forms the Tp^Fu,MeZn-X complexes (X = Cl, Br, I, NCS, CH₃COO, CF₃COO). With zinc perchlorate, the bis-ligand complex Zn(Tp^Fu,Me)₂ is formed preferrably, but by carefully controlling the reaction conditions, the “enzyme model” Tp^Fu,MeZn-OH could be obtained. The latter models carbonic anhydrase by inserting CO₂ and CS₂ in methanol producing Tp^Fu,MeZn-OCOOMe and Tp^Fu,MeZn-SCSOMe. It models hydrolases by the hydrolytic cleavage of tris(p-nitrophenyl)phosphate and γ-thiobutyrolactone. It does not hydrolyse trifluoroacetamide, but instead deprotonates it, yielding Tp^Fu,MeZn-NHCOCF₃.     

Structural aspects of some 2:1 dipyridylamine complexes of some copper(II) salts: An interesting new polymorph of the binuclear carbonate/perchlorate tetrahydrate adduct

Recent work has described the structural characterization of the complexes :dpyam:H₂O (1:4:4), X′ = ClO₄, BF₄, ‘dpyam’ = dipyridylamine, as a pair of triclinic Z = 1 isomorphs, the cations being modelled in terms of pairs of copper atoms bridged by a carbonate ion disordered about a crystallographic inversion centre. This work has been revisited in the course of describing a new polymorph of the perchlorate in a triclinic cell of twice the size, in which the carbonate unit, now non-disordered, bridges a pair of crystallographically independent copper atoms which display distinctly different coordination environments, one close to the square-pyramidal norm, the other not. Studies of adducts of the form [(dpyam)₂CuX]X′(·nH₂O) are also recorded. The X/X′ = propionate/iodide adduct is found to be isomorphous with its acetate/BF₄ but, interestingly, not its propionate/Cl counterpart. ‘Low’-temperature redeterminations of the NCO/Cl · 4H₂O and nitrite/ClO₄ adducts are also recorded, enabling definition of the hydrogen-bonding scheme in the former.     

Characterization and thermal activation of adducts of Group 4 tetrahalides with 1,2-dialkoxyalkanes

Coordination compounds of general formula MX₄[κ²-O(R)CH₂CH(R′)OR′′], 2a-i, have been prepared in high yield upon addition of a variety of 1,2-dialkoxyalkanes, ROCH₂CH(R′)OR′′, to MX₄ (M = Ti, X = F, 1a, I, 1b; M = Zr, X = Br, 1c, I, 1d). The new complexes have been characterized by elemental analysis and NMR spectroscopy. The thermal stability of 2 has been studied. Fragmentation of the TiI₄ adducts takes place in chloroform solution at 90 °C: after hydrolysis of the reaction mixtures, MeI and CH₂ICH₂I have been detected from TiI₄[dme] [dme = MeO(CH₂)₂OMe], MeI and Me₂O from TiI₄[MeOCH₂CH(Me)OMe], and MeI, CH₂ICH₂I, Me₂O, CH₂ClI from TiI₄[MeO(CH₂)₂OCH₂Cl]. The diether MeO(CH₂)₂OCH₂Cl is thermally activated also when coordinated to ZrX₄ (X = Br, I): after hydrolysis, MeBr, CH₂BrCH₂Br, O(CH₂CH₂Cl)₂ and Me₂O (X = Br) and MeI, CH₂ClI and CH₂ICH₂I (X = I) have been found, respectively.     

Mo(II) complexes: A new family of cytotoxic agents?

Several molybdenum complexes, [Mo(η³-C₃H₅)X(CO)₂(N-N)] (N-N = 1,10-phenanthroline, phen: X = CF₃SO₃T1, X = Br B1, X = Cl C1; N-N = 2,2′-bipyridyl, X = CF₃SO₃T2, X = Br B2) and [W(η³-C₃H₅)Br(CO)₂(phen)] (W1) have been synthesized and characterized. Their antitumor properties have been tested in vitro against human cancer cell lines cervical carcinoma (HeLa) and breast carcinoma (MCF-7) using a metabolic activity test (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, MTT), leading to IC₅₀ values ranging from 3 to 45 μM, approximately. Most complexes exhibited significant antitumoral activity. Complexes B1 and T2 were chosen for subsequent studies aiming to understand their mechanism of action. Cellular uptake of molybdenum and octanol/water partition assays revealed that both B1 and T2 exhibit a selective uptake by cells and intermediate partition coefficients. The binding constants of B1 and T2 with ct DNA, as determined by absorption titration, are 2.08 (± 0.98) × 10⁵ and 3.68 (± 2.01) × 10⁵ M^− 1, respectively. These results suggest that they interact with DNA changing its conformation and possibly inducing cell death, and may therefore provide a valuable tool in cancer chemotherapy.     

Synthetic, EPR spectroscopic, magnetic and X-ray crystallographic structural studies on copper(II) complexes of the tridentate N2S donor ligand formed from 6-methyl-2-formylpyridine and S-methyldithiocarbazate (Hmpsme)

New copper(II) complexes of general empirical formula, Cu(mpsme)X · xCH₃COCH₃ (mpsme = anionic form of the 6-methyl-2-formylpyridine Schiff base of S-methyldithiocarbazate; X = Cl, N₃, NCS, NO₃; x = 0, 0.5) have been synthesized and characterized by IR, electronic, EPR and susceptibility measurements. Room temperature μ_eff values for the complexes are in the range 1.75-2.1 μ_B typical of uncoupled or weakly coupled Cu(II) centres. The EPR spectra of the [Cu(mpsme)X] (X = Cl, N₃, NO₃, NCS) complexes reveal a tetragonally distorted coordination sphere around the mononuclear Cu(II) centre. We have exploited second derivative EPR spectra in conjunction with Fourier filtering (sine bell and Hamming functions) to extract all of the nitrogen hyperfine coupling matrices. While the X-ray crystallography of [Cu(mpsme)NCS] reveals a linear polymer in which the thiocyanate anion bridges the two copper(II) ions, the EPR spectra in solution are typical of a magnetically isolated monomeric Cu(II) centres indicating dissociation of the polymeric chain in solution. The structures of the free ligand, Hmpsme and the {[Cu(mpsme)NO₃] · 0.5CH₃COCH₃}₂ and [Cu(mpsme)NCS]_n complexes have been determined by X-ray diffraction. The {[Cu(mpsme)NO₃] 0.5CH₃COCH₃}₂ complex is a centrosymmetric dimer in which each copper atom adopts a five-coordinate distorted square-pyramidal geometry with an N₂OS₂ coordination environment, the Schiff base coordinating as a uninegatively charged tridentate ligand chelating through the pyridine and azomethine nitrogen atoms and the thiolate, an oxygen atom of a unidentate nitrato ligand and a bridging sulfur atom from the second ligand completing the coordination sphere. The [Cu(mpsme)(NCS)]_n complex has a novel staircase-like one dimensional polymeric structure in which the NCS⁻ ligands bridge two adjacent copper(II) ions asymmetrically in an end-to-end fashion providing its nitrogen atom to one copper and the sulfur atom to the other.     

Ionic metallomesogens derived from silver(I) bis-amine complexes: Structure and mesogenic behavior

Complexes [Ag(NH₂R)₂]X, (X = NO₃, R = -C₆H₄-C_nH_2n+1-p, -C₆H₄-O-C_nH_2n+1-p, -CH₂-C₆H₄-O-C_nH_2n+1-p, n = 6, 8, 10, 12, 14; X = BF₄, R = -CH₂-C₆H₄-O-C_nH_2n+1-p, n = 6, 8, 10, 12, 14; X = OAc, R = -CH₂-C₆H₄-O-C₁₀H₂₁-p; X = CF₃SO₃, R = -CH₂-C₆H₄-O-C₁₀H₂₁-p) have been prepared. They all show S_A mesophases corresponding to two kinds of structures, already present in the solid state. The alkylaniline and alkoxyaniline derivatives adopt a bilayered structure where the cation has an extended centrosymmetric conformation. The benzylamine derivatives contain U-shaped cations giving rise to a bilayered structure which allows microsegregation of the organic part of the molecule from the inorganic Ag?(anion) part. Some degree of interdigitation of the terminal chains is observed for all the complexes with aryl containing ligands.     

New oligo-/poly-meric forms for MX:dpex (1:1) complexes (M = Cu, Ag; X = (pseudo-)halide; dpex = Ph2E(CH2)xEPh2, E = (P), As; x = 1, 2)

Single-crystal X-ray structural characterizations of MX:dpam (1:1) (‘dpam’ = Ph₂AsCH₂AsPh₂) are reported for MX = AgCl, Br; CuI, CN/Cl (all isomorphous) and AgI, AgSCN, CuSCN arrays, all being of the novel form [(μ-X){M(μ-X)(As-dpam-As′)₂M′}]_∞, essentially the familiar M(E-dpem-E′)₂M′ binuclear array with both ‘bridging’ and (linking) ‘terminal’ (pseudo-)halides involved in the polymer. A different arrangement of bridging and linking entities is found with AgX:dpae (1:1)_2(∞|∞), X = Br, NCO, ‘dpae’ = Ph₂As(CH₂)₂AsPh₂, now comprising [M(μ-X)₂(As-dpae-As)M] kernels linked by As-dpae-As′, while in the thiocyanate analogue units are linked by the dpae ligands into a two-dimensional web. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR).