Synthesis and reactivity with amines of new diiron alkynyl methoxy carbene complexes

The new diiron alkynyl methoxy carbene complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CCR′}(Cp)₂]⁺ (R = 2,6-Me₂C₆H₃ (Xyl), R′ = Tol, 3a; R = Xyl, R′ = Ph, 3b; R = Xyl, R′=Buⁿ, 3c; R = Xyl, R′=SiMe₃, 3d; R = Me, R′ = Tol, 3e; R = Me, R′ = Ph, 3f) are obtained in two steps by addition of R′CCLi (R′ = Tol, Ph, Buⁿ, SiMe₃) to the carbonyl aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂]⁺ (R = Xyl, 1a; Me, 1b), followed by methylation of the resulting alkynyl acyl compounds [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(O)CCR′}(Cp)₂] (R = Xyl, R′ = Tol, 2a; R = Xyl, R′ = Ph, 2b; R = Xyl, R′ = Buⁿ, 2c; R = Xyl, R′ = SiMe₃, 2d; R = Me, R′ = Tol, 2e; R = Me, R′ = Ph, 2f). Complexes 3 react with secondary amines (i.e., Me₂NH, C₅H₁₀NH) to give the 4-amino-1-metalla-1,3-dienes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CHC(R′)(NMe₂)}(Cp)₂]⁺ (R = Xyl, R′ = Tol, 4a; R = Xyl, R′ = Ph, 4b; R = Me, R′ = Ph, 4c) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(Tol)(NC₅H₁₀)}(Cp)₂]⁺, 5. The addition occurs stereo-selectively affording only the E-configured products. Analogously, addition of primary amines R′NH₂ (R′ = Ph, Et, Prⁱ) affords the 4-(NH-amino)-1-metalla-1,3-diene complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(R)(NHR′)}(Cp)₂]⁺ (R = Ph, 6a; Et, 6b; Prⁱ, 6c). In the case of 6a, only the E isomer is formed, whereas a mixture of the E and Z isomers is present in the case of 6b,c, with prevalence of the latter. Moreover, the two isomeric forms exist under dynamic equilibrium conditions, as shown by VT NMR studies. Complexes 6 are deprotonated by strong bases (e.g., NaH) resulting in the formation of the neutral vinyl imine complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(NR)(Tol)}(Cp)₂] (R = Ph, 7a; Et, 7b; Prⁱ, 7c); the reaction can be reverted by addition of strong acids. X-ray crystal structures have been determined for 3a[CF₃SO₃] · Et₂O, 4c[CF₃SO₃], 6a[BF₄] · CH₂Cl₂, 6c[CF₃SO₃] · 0.5Et₂O and 7a · CH₂Cl₂.     

Heteroleptic lanthanide terphenyl/tris(pyrazolyl)borate compounds of ytterbium

The synthesis and structural characterization of the two novel unsolvated heteroleptic ytterbium compounds DanipYb(Tp^Me,Me)Cl (1) and DanipYb(Tp^Me,Me)CH₂SiMe₃ (2) by simple salt metathesis reaction is reported [Danip = 2,6-di(o-anisol)phenyl); Tp^Me,Me = hydrotris(3,5-dimethyl-pyrazolyl)borate]. In the molecular structure of 2 a flexible bonding mode of the donor-functionalized terphenylic ligand is observed.     

Difference in bonding behaviour of azide and thiocyanate to Hg(II)-azoimidazoles

Mercury(II) acetate reacts with the 1-alkyl-2-(arylazo)imidazoles [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and sodium azide in methanol solution to afford azido bridged polymeric complexes [Hg(RaaiR′)(N₃)₂]_n (3/4). On setting up similar reaction condition, the reaction of Hg(OAc)₂ with RaaiR′ and NH₄SCN has yielded, instead of polymer, an ion-pair [Hg(RaaiR′)₄][Hg(SCN)₄] (5/6). The complexes are characterised by elemental analysis, IR, UV-Vis, ¹H NMR spectral data and single-crystal X-ray structures of [Hg(HaaiEt)(μ-1,1-N₃)₂]_n (4a) and [Hg(HaaiEt)₄][Hg(SCN)₄] (6a). The complex 4a is a coordination polymer with end-on (μ-1,1) azido bridge and 6a has tetrahedral structure.     

Efficient aerobic oxidation of hydrocarbons promoted by high-spin nonheme Fe(II) complexes without any reductant

Fe(II)-tris(2-pyridylmethyl)amine complexes, Fe(II)-tpa, having different co-existing anions, [Fe(tpa)(MeCN)₂](ClO₄)₂ (1), [Fe(tpa)(MeCN)₂](CF₃SO₃)₂ (2) and [Fe(tpa)Cl₂] (3), were prepared. Effective magnetic moments (evaluated by the Evans method) revealed that while 1-3 in acetone and 3 in acetonitrile (MeCN) have a high-spin Fe(II) ion at 298 K, the Fe(II) ions of 1 and 2 are in the low-spin state in MeCN. The aerobic oxidation of 1-3 was monitored by UV-Vis spectral changes in acetone or MeCN under air at 298 K. Only the high-spin Fe(II)-tpa complexes were oxidized with rate constants of k_obs = 0.1-1.3 h⁻¹, while 1 and 2 were stable in MeCN. The aerobic oxidation of 1 or 2 in acetone was greatly accelerated in the presence of pure, peroxide-free cyclohexene (1000 equiv.) and yielded a large amount of oxidized products; 2-cyclohexe-1-ol (A) and 2-cyclohexene-1-one (K) (A + K: 23 940% yield based on Fe; A/K = 0.3), and cyclohexene oxide (810%). Besides cyclohexene, aerobic oxidation of norbornene, cyclooctene, ethylbenzene, and cumene proceeded in the presence of 1 in acetone at 348 K without any reductant. Essential factors in the reaction are high-spin Fe(II) ion and labile coordination sites, both of which are required to generate Fe(II)-superoxo species as active species for the H-atom abstraction of hydrocarbons.     

A series of cyanide-bridged binuclear complexes

A series of cyanide-bridged binuclear complexes, (‘S₃’)Ni-CN-M[Tp^tBu] (‘S₃’ = bis(2-mercaptophenyl)sulfide, Tp^tBu = hydrotris(3-tert-butylpyrazolyl)borate, M = Fe (2-Fe), Co (2-Co), Ni (2-Ni), Zn (2-Zn)) was prepared by the coupling of K[(‘S₃’)Ni(CN)] with [Tp^tBu]MX. The isostructural series of complexes was structurally and spectroscopically characterized. A similar coupling strategy was used to synthesize the anionic copper(I) analogue, Et₄N{(‘S₃’)Ni-CN-Cu[Tp^tBu]}, 2-Cu.An alternative synthesis was devised for the preparation of the linkage isomers of 2-Zn, i.e. of cyanide-bridged linkage isomers. X-ray diffraction, ¹³C NMR and IR spectral studies established that isomerization to the more stable Ni-CN-Zn isomer occurs. DFT computational results buttressed the experimental observations indicating that the cyanide-bridged isomer is ca. 5 kcal/mol more stable than its linkage isomer.     

Synthesis, reactivity, and structures of dialuminum complexes containing linked ketiminate ligands

Linked bis(ketimine) (1) can be prepared with the reaction of excess 2,4-pentanedione and 4,4′-methylene-bis(2,6-diisopropylaniline) in methanol in the presence of catalytic amount of formic acid. The dialuminum alkyl complexes containing the linked bis(ketiminate) dianionic ligands, [OC(Me)CHC(Me)N(2,6-ⁱPr₂C₆H₂-4)AlR₂]₂CH₂ (2, R = Me; 3, R = Et), were prepared by a reaction of 2 equiv AlR₃ with [OC(Me)CHC(Me)NH(2,6-ⁱPr₂C₆H₂-4)]₂CH₂ in methylene chloride. Reactions of 2 with 2 and 4 equiv of I₂ gave corresponding aluminum iodo complexes 4 and 5, respectively. Treatment of 5 with 2 equiv of AgBF₄, however, gave a diboron complex, [OC(Me)CHC(Me)N(2,6-ⁱPr₂C₆H₂-4)BF₂]₂CH₂ (6), in 18% isolated yield. All new complexes have been characterized by ¹H and ¹³C NMR spectroscopy and complexes 2, 3, and 6 are also confirmed by X-ray diffraction.     

Studies on Zn(II) and Cd(II) heteroligand complexes with RC(S)NHP(O)(OiPr)2 (R = Ph, NH2, PhNH) and α-diimine (bpy and phen) ligands. C-Cl bond cleavage of CH2Cl2 by [Zn(phen){PhC(S)NP(O)(OiPr)2}2]

The reaction of [ZnL^I,II₂] (L^I = [NH₂C(S)NP(O)(OiPr)₂]⁻; L^II = [PhNHC(S)NP(O)(OiPr)₂]⁻) or [Cd₂L^IV₄] (L^IV = [PhC(S)NP(O)(OiPr)₂]⁻) with 2,2′-bipyridine (bpy) or 1,10-phenanthroline (phen) leads to the heteroligand complexes [Zn(bpy)L^I,II₂], [Zn(phen)L^I,II₂], [Cd(bpy)L^IV₂] or [Cd(phen)L^IV₂], respectively. The introduction of the diimine ligands into the coordination sphere of the metal cation provokes a change from 1,5-O,S- to 1,3-N,S-coordination of the anionic ligands for Zn but not for the Cd species. The reaction of [Zn(phen)L^IV₂] (L^IV = PhC(S)NP(O)(OiPr)₂⁻) with CH₂Cl₂ cleaves the chlorine atoms from CH₂Cl₂ and leads to the formation of [Zn(phen)L^IVCl] and S,S′-bis(benzimidothio-N-diisopropoxyphosphoryl)methane (L^IV-CH₂-L^IV) in high yields. Using CHCl₃ or CCl₄ instead of CH₂Cl₂ does not lead to the formation of chlorine substituted products even under reflux conditions. The new compounds were investigated by ¹H and ³¹P{¹H} NMR, IR spectroscopy and microanalysis. Crystal structures of [ZnL^II₂], [Cd(phen)L^IV₂]·CH₂Cl₂, [Zn(bpy)L^I₂] and [Zn(phen)L^IVCl] were elucidated by X-ray diffraction.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Preparation and characterization of macrocyclic dinickel complexes coligated by monoalkyl- and dialkylcarbamates

The dinuclear nickel(II) complex [Ni₂L(Cl)]⁺ (1), where (L)²⁻ represents a 24-membered binucleating hexamine-dithiophenolate ligand, reacts readily with primary and secondary amines RR′NH in the presence of CO₂ (1 bar) to give dinuclear monoalkyl- and dialkylcarbamate complexes [Ni₂L(O₂CNRR′)]⁺ (R = H, R′ = CH₂Ph (2), R = H, R′ = n-Bu (3), R = H, R′ = n-Oct (4), R = H, R′ = CH₂CH₂OH (5), R = R′ = Et (6), and R = R′ = CH₂CH₂OH (7)). Complexes 2-7 can also be prepared by the reaction of 1 with CO₂(air)/amine. The carbamate complexes are hydrolyzed in methanolic solution to give the known alkylcarbonate complex [Ni₂L(O₂COMe)]⁺ (8). These conversions are less rapid than the transesterification reactions of 8, due to a less electron-demanding carboxyl C(carbamate) atom. All new complexes were either isolated as perchlorate or tetraphenylborate salts and fully characterized by elemental analysis, UV/Vis, and IR spectroscopy. The structures of 2[BPh₄] and 7[BPh₄] have also been determined by X-ray crystallography. They confirm the presence of μ_1,3-bridging alkylcarbamate units in the products.     

Rhodium and iridium olefin complexes with bulky cyclopentadienyl and hydrotris(pyrazolyl)borate ligands

The synthesis of a series of rhodium and iridium complexes bearing bulky cyclopentadienyl or hydro(trispyrazolyl)borate ligands is described. The rhodium cyclopentadienyl and hydrotris(pyrazolyl)borate diene compounds, [(η⁵-C₅Me₄Bu^t)Rh(η⁴-2,3-MeRC₄H₄] (R = H, 1; Me, 2) and Tp^MsRh(η⁴-2,3-MeRC₄H₄) (R = H, 3; Me, 4; Tp^Ms is hydrotris(3-mesitylpyrazol-1-yl)borate), respectively, have been prepared from the corresponding Rh(I) diene precursors and Zn(C₅Me₄Bu^t)₂ (for 1 and 2), or TlTp^Ms (for 3 and 4), as effective C₅Me₄Bu^t or Tp^Ms transfer reagents. In contrast with these results, attempts to obtain a bis(ethylene) derivative of the Tp^tolIr(I) unit (Tp^tol stands for hydrotris(3-p-tolylpyrazol-1-yl)borate) have provided instead the Ir(III) complex [(κ⁴-N,N′,N″,C-Tp^tol)-Ir(C₂H₅)(C₂H₄)] (5), whose formation requires C-H bond activation of a molecule of ethylene and of one of the Tp^tolp-tolyl substituents. In refluxing toluene 5 experiences metalation of a second p-tolyl substituent to give [(κ⁵-N,N′,N″,C,C′-Tp^tol)-Ir(C₂H₄)] (6), which features unusual κ⁵-Tp^tol coordination. The latter compound reacts with carbon monoxide to yield the corresponding carbonyl, 7.     

Mononuclear iron(III) complexes supported by tripodal N3O ligands: Synthesis, structure and reactivity towards DNA cleavage

A new synthetic route to the known tripodal tetradentate N₃O ligand L¹ (HL¹ = [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine) is reported. The related compounds HLⁿ (n = 2, 3) were prepared by a similar procedure. Treatment of HLⁿ (n = 1-3) with FeCl₃·6H₂O in hot methanol led to the mononuclear iron(III) complexes [Fe(Lⁿ)Cl₂] (1: n = 1, 2: n = 2, 3: n = 3). The solid-state structures of complexes 1 and 2 were determined by X-ray crystallography. [Fe(L¹)Cl₂] (1) showed effective nuclease activity in the presence of hydrogen peroxide, converting supercoiled plasmid DNA to its linear form.     

Synthesis and characterisation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes [Ti(IV), Zr(IV), Hf(IV), La(III), Ce(III), Yb(III), Sn(II) and Fe(II)]

The preparation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes is described. These are of formula [M{η⁵-C₅H₄(BX)}Cl₃] [M = Ti and X = CAT (2a), CAT^t (2b) or CAT^tt (2c); X = CAT^tt and M = Zr (4a) or Hf (4b)], [M{η⁵-C₅H₄(BX)}₂Cl₂] [M = Zr, X = CAT (3a) or CAT^t (3c); or M = Hf, X = CAT (3b) or CAT^t (3d)], [M{(μ-η⁵-C₅H₃BCAT)₂ SiMe₂}Cl₂] [M = Zr (5a) or Hf (5b)], [M{η⁵-C₅H₃(BCAT)₂}Cl₃] [M = Zr (6a) or Hf (6b)], [M{η⁵-C₅H₄BCAT}₃(THF)] [M = La (7a), Ce (7b) or Yb (7c)], [Sn{η⁵-C₅ H₄(BCAT^t)}Cl](8) and [Fe{η⁵-C₅H₄(BCAT^t)}₂] (9). The abbreviations refer to BO₂C₆H₄-1,2 (BCAT) and the 4-Bu^t (BCAT^t) and the (BCAT^tt) analogues. The compounds 2a-9 have been characterised by microanalysis, multinuclear NMR and mass spectra. The single crystal X-ray structure of the lanthanum compound 7a is presented.     

A series of oxo-vanadium(IV) complexes containing mixed ligands of poly(pyrazolyl)borate and organic carboxylic acid: Synthesis, structural characterization and primary study of bromination reaction activities

A series of oxo-vanadium(IV) complexes: Tp^∗VO(pzH^∗)(CH₃COO) (1), Tp^∗VO(pzH^∗)(CCl₃COO) (2), Tp^∗VO(pzH^∗)(C₆H₅COO) (3), Tp^∗VO(pzH^∗)(m-NO₂-C₆H₄COO)·CH₃CN (4) and [Tp^∗VO(pzH^∗)(H₂O)]⁺[m-NO₂-C₆H₄-SO₃]⁻·CH₃OH (5) (Tp^∗ = hydrotris(3,5-dimethylpyrazolyl)borate; pzH^∗ = 3,5-dimethylpyrazole) are synthesized in methanol solution under physiological conditions. They are characterized by elemental analysis, IR, UV-Vis and X-ray crystallography. Structural analyses show that the vanadium atoms in complexes 1-5 are all in a distorted-octahedral environment with the N₄O₂ donor set, and intra- or inter-hydrogen bonding linkages have been also observed in each complex. Bromination reaction activity of the complexes has been evaluated by the method with phenol red as organic substrate in the presence of H₂O₂, Br⁻ and phosphate buffer, indicating that they can be considered as potential functional model vanadium-dependent haloperoxidases. In addition, thermal analysis and quantum chemistry calculations were also performed and discussed in detail.     

Diiron and diruthenium aminocarbyne complexes containing pseudohalides: stereochemistry and reactivity

Acetonitrile is easily displaced from [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (R = 2,6-Me₂C₆H₃ (Xyl) (1a); Me (1b)) upon stirring in THF at room temperature in the presence of [NBu₄][SCN]. The resulting complexes trans-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (trans-2a); Me (trans-2b)) are completely isomerised to cis-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (cis-2a); Me (cis-2b)) when heated at reflux temperature. Similarly, the complexes cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCO)(Cp)₂] (M = Fe, R = Me (4a); M = Ru, R = Xyl (4b); M = Ru, R = Me (4c)) and cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(N₃)(Cp)₂] (M = Fe, R = Xyl (5a); M = Fe, R = Me (5b); M = Ru, R = Xyl (5c)) can be obtained by heating at reflux temperature a THF solution of [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (M = Fe, R = Xyl (1a); M = Fe, Me (1b); M = Ru, R = Xyl (1c); M = Ru, R = Me (1d)) in the presence of NaNCO and NaN₃, respectively. The reactions of 5 with MeO₂CCCCO₂Me, HCCCO₂Me and (NC)(H)CC(H)(CN) afford the triazolato complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃C₂(CO₂Me)₂}(Cp)₂] (M = Fe, R = Xyl (6a); M = Fe, R = Me (6b); M = Ru, R = Xyl (6c)), [M₂{μ-CN(Me)(R)}(μ- CO)(CO){N₃C₂(H)(CO₂Me)}(Cp)₂] (M = Fe, R = Me (7a); M = Ru, R = Xyl (7b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃C₂(H)(CN)}(Cp)₂] (8), respectively. The asymmetrically substituted triazolato complexes 7-8 are obtained as mixtures of N(1) and N(2) bonded isomers, whereas 6 exists only in the N(2) form. Methylation of 6-8 results in the formation of the triazole complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(CO₂Me)₂}(Cp)₂][CF₃SO₃] (9), [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃(Me)C₂(H)(CO₂Me)}(Cp)₂][CF₃SO₃] (M = Fe, R = Me (10a); M = Ru, R = Xyl (10b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(H)(CN)}(Cp)₂][CF₃SO₃], 11. The crystal structures of trans-2b, 4b · CH₂Cl₂, 5a, 6b · 0.5CH₂Cl₂ and 8 · CH₂Cl₂ have been determined.     

Synthesis, photoluminescence and electrochemiluminescence of ruthenium(II) polypyridyl complexes based on bipyridine derivatives with carbazole moieties

Six complexes (1-6) with the type of [Ru(bpy)₂L]X₂ (1-3: L = L1-L3, X = Cl⁻; 4-6: L = L1-L3, X = PF₆⁻) were synthesized based on 2,2′-bipyridine and three 2,2′-bipyridine derivatives L1, L2 and L3 (L1 = 5,5′-dibromo-2,2′-bipyridine, L2 = 5-bromo-5′-carbazolyl-2,2′-bipyridine, L3 = 5,5′-dicarbazolyl-2,2′-bipyridine). The complexes 1-6 were characterized by ¹H NMR, MS(ESI) and IR spectra, along with the X-ray crystal structure analysis for 1, 5 and 6. Their photophysical properties and electrochemiluminescence (ECL) properties were investigated in detail. In the UV-Vis absorption spectra, all complexes 1-6 show strong intraligand (π → π^∗) transitions and metal-ligand charge transfer (MLCT, dπ (Ru) → π^∗) bands. Upon the excitation wavelengths at ∼508 nm, all complexes 1-6 exhibit typical MLCT emission of ruthenium(II) polypyridyl complexes. The introduction of carbazole moieties improves the MLCT absorption and emission intensity. The ruthenium(II) complexes 1-6 exhibit good electrochemiluminescence (ECL) properties in [Ru(bpy)₂L]²⁺/tri-n-propylamine (TPrA) acetonitrile solution and the complexes with PF₆⁻ showed higher ECL emission intensity than that of the complexes with Cl⁻ based on the same ligands.     

Syntheses, crystal structures and properties of Cd(II) and Co(II) complexes with 4,4′-dipyridylsulfide ligand

Two new coordination polymers [Cd(dps)₂Cl₂] (1) and [Co(dps)₂(H₂O)₂]·(abs)₂(H₂O)₂ (2) (dps = 4, 4′-dipyridylsulfide, Habs = 4-amino benzenesulfonic acid) have been synthesized under similar conditions and characterized by elemental analysis, fluorescence spectra and single crystal X-ray diffraction. Compound 1 displays a dps-bridged 2D puckered, grid-like layer, which is further linked by C-H?Cl hydrogen bonds to form a 3D supramolecular architecture. Compound 2 shows a dps-bridged double-stranded chain structure, which is extended by N-H?O and O-H?O hydrogen bonds generating a 3D network. Solid-state fluorescence results reveal that both complexes can emit strong emission bands, at 467 nm and 518 nm for 1 and 344 nm for 2, respectively. Magnetic measurements show that there are weak antiferromagnetic interactions between the adjacent Co(II) ions in 2.     

Reactions of the pentamethylcyclopentadienyl trisulfido tungsten with M′Cl2 (M′ = Zn, Cd, Hg): Isolation and structural characterization of [PPh4][(η-C5Me5)WS3(ZnCl2)] and [{(η-C5Me5)WS3}2Hg]

Reactions of [PPh₄][(η⁵-C₅Me₅)WS₃] with equimolar M′Cl₂ (M′ = Zn, Cd) in MeCN or 0.5 equiv. of HgCl₂ in DMF afforded two binuclear clusters [PPh₄][(η⁵-C₅Me₅)WS₃(M′Cl₂)] (1: M′ = Zn; 2: M′ = Cd) and one trinuclear cluster [{(η⁵-C₅Me₅)WS₃}₂Hg] (3). Compounds 1-3 were characterized by elemental analysis, IR, UV-Vis, ¹H NMR and X-ray crystallography. Compound 1 may be viewed as a 1:1 composite of [PPh₄][(η⁵-C₅Me₅)WS₃] and ZnCl₂, in which one [(η⁵-C₅Me₅)WS₃]⁻ anion binds a ZnCl₂ moiety via two μ-S atoms. In the structure of 3, two [(η⁵-C₅Me₅)WS₃]⁻ anions coordinate the central Hg atom via two μ-S atoms, forming an unique bent linear structure. In addition, internal redox reactions of [PPh₄][(η⁵-C₅Me₅)WS₃] under the presence of M′Cl₂ (M′ = Zn, Cd, Hg) in high concentrations were discussed.     

Substitution reactions of tetrahydrofuran in [Cr(thf)3Cl3] with mono and bidentate N-donor ligands: X-ray crystal structures of [Cr(bipy)(OH2)Cl3] and [HpyNH2][Cr(bipy)Cl4]

Substitution of thf ligands in [Cr(thf)₃Cl₃] and [Cr(thf)₂(OH₂)Cl₃] was investigated. 2,2′-Bipyridine (bipy) was reacted with [Cr(thf)₃Cl₃] to form [Cr(bipy)(thf)Cl₃] (1), which was subsequently reacted with water to give [Cr(bipy)(OH₂)Cl₃] (2). Reaction of 1 with acetonitrile (CH₃CN), pyridine (py) and pyridine derivatives to form [Cr(bipy)(L)Cl₃] (L = CH₃CN 3, py 4 and 4-pyR with R = NH₂5, Bu^t6 and Ph 7). In addition, the substitution of bipy in [Cr(thf)₃Cl₃] was followed by ¹H NMR spectroscopy at room temperature, which showed completion of the reaction in ca. 100 min. Complex 2 was characterised by single crystal X-ray diffraction. The theoretical powder diffraction pattern of 2 was compared to the experimentally obtained powder X-ray diffraction pattern, and shows excellent agreement. The dimer [Cr₂(bipy)₂Cl₄(μ-Cl)₂] was cleaved asymmetrically to give the anionic complex [Cr(bipy)Cl₄]⁻ (8) and [Cr(bipy)₂Cl₂]⁺ (9). Complexes 8 and 9 were characterised by single crystal X-ray diffraction.     

Bis(O2S2 macrocycle) complexes of palladium(II)

Two isomeric dibenzo-O₂S₂ macrocycles L¹ and L² have been synthesised and their coordination chemistry towards palladium(II) has been investigated. Two-step approaches via reactions of 1:1-type complexes, [cis-Cl₂LPd] (1a: L = L¹, 1b: L = L²), with different O₂S₂ macrocycle systems (L¹ and L²) have led to the isolation of the following bis(O₂S₂ macrocycle) palladium(II) complexes in the solid state: [Pd(L¹)₂](ClO₄)₂ (2a) and a mixture of [Pd(L¹)₂](ClO₄)₂ (2a) + [Pd(L²)₂](ClO₄)₂ (2b).     

Hydrogen-bonding assemblies constructed from metalloligand building blocks and H2O

New hydrogen-bonding assemblies were synthesized from the reaction of a metalloligand, [Cu(2,4-pydca)₂]²⁻ (L^Cu) (2,4-pydca = 2,4-pyridinedicarboxylate), with a Fe^II ion or an imidazole in an aqueous medium and crystallographically characterized. The obtained compounds, [Fe(H₂O)₆][Cu(2,4-pydca)₂] (1) and [Cu(2,4-pydca)(imidazole)₂] · 2H₂O (2), have metalloligand dimer units, [Cu₂(2,4-pydca)₄]⁴⁻ and [Cu₂(2,4-pydca)₂(imidazole)₄], respectively, each of which assembles by π-π (1) and hydrogen-bonding (2) interactions to form 1-D metalloligand arrays. The 1-D metalloligand arrays are linked by rich hydrogen-bonding interactions via H₂O molecules.