Copper(I) and silver(I) tertiary phosphines complexes: Synthesis, X-ray structures and spectroscopic characterization

Six new complexes, [Cu₄I₄(PPh₂Cy)₄]·2H₂O (1), [CuI(PPhCy₂)₂] (2), [CuCl(PPhCy₂)₂] (3), and [CuBr(PPh₃)₃]·CH₃CN (4), [Ag(PPhCy₂)₂(NO₃)] (5), [Ag(PCy₃)(NO₃)]₂ (6) [where Ph = phenyl, Cy = cyclohexyl], have been synthesized and structurally characterized by X-ray diffraction, IR absorption spectra and NMR spectroscopic studies (except complex 4). The X-ray diffraction analysis of complex (1), pseudo polymorph of complex [Cu₄I₄(PPh₂Cy)₄], reveals a stella quadrangula structure. The four corners of the cube are occupied by copper(I) atoms and four I atoms are present at the alternative corners of the cube, further more the copper(I) atoms are coordinated to a monodentate tertiary phosphine. Complexes (2) and (3) are isostructural with trigonal planar geometry around the copper(I) atom. The crystal structure of complex (4) is a pseudo polymorph of complex [CuBr(PPh₃)₃] and the geometrical environment around the copper(I) centre is distorted tetrahedral. In the Ag^I complexes (5) and (6), the central metal atoms have pseudo tetrahedral and trigonal planar geometry, respectively. Spectroscopic and microanalysis results are consistent with the single crystal X-ray diffraction studies.     

Structural variations and spectroscopic properties of copper(I) complexes with bis(schiff base) ligands

Six copper(I) complexes {[Cu₂(L1)(PPh₃)₂I₂] · 2CH₂Cl₂}_n (1), {[Cu₂(L2)(PPh₃)₂]BF₄}_n (2), [Cu₂(L3)(PPh₃)₄I₂] · 2CH₂Cl₂ (3), [Cu₂(L4)(PPh₃)₄I₂] (4), [Cu₂(L5)(PPh₃)₂I₂] (5) and [Cu₂(L6)(PPh₃)₂I₂] (6) have been prepared by reactions of bis(schiff base) ligands: pyridine-4-carbaldehyde azine (L1), 1,2-bis(4′-pyridylmethyleneamino)ethane (L2), pyridine-3-carbaldehyde azine (L3), 1,2-bis(3′-pyridylmethyleneamino)ethane (L4), pyridine-2-carbaldehyde azine (L5), 1,2-bis(2′-pyridylmethyleneamino)ethane (L6) with PPh₃ and copper(I) salt, respectively. Ligand L1 or L2 links (PPh₃)₂Cu₂(μ-I)₂ units to form an infinite coordination polymer chain. Ligand 3 or 4 acts as a monodentate ligand to coordinate two copper(I) atoms yielding a dimer. Ligand 5 or 6 chelates two copper(I) atoms using pyridyl nitrogen and imine nitrogen to form a dimer. Complexes 1-4 exhibit photoluminescence in the solid state at room temperature. The emission has been attributed to be intraligand π-π* transition mixed with MLCT characters.     

Syntheses and structures of heterobimetallic complexes derived from [Ga(edt)2] as a metalloligand (edt = SC2H4S): Potential precursors for ternary materials MGaS2 (M = Cu or Ag)

Metathesis reaction between equimolar amount of [Et₄N][GaCl₄] and Na₂edt in methanol resulted in the formation of the dichloro complex [Et₄N][Ga(edt)Cl₂] (1), whereas reaction of [Et₄N][GaCl₄] with two equivalents of Na₂edt in methanol gave the complex [Et₄N][Ga(edt)₂] (2) which can act as a metalloligand. Treatment of 2 with M(PPh₃)₂NO₃ in DMF/CH₂Cl₂ afforded the heterobimetallic complexes [Ga(edt)₂M-(PPh₃)₂] (M = Cu 3, Ag 4) in moderate yields. The structures of 1-4 were determined by single-crystal X-ray diffraction analyses. Both [Ga(edt)Cl₂]⁻ and [Ga(edt)₂]⁻ anions have a distorted tetrahedral geometry. The former consists of one five-membered ring formed by chelating dithiolate and two terminal chloride atoms while the latter consists of two five-membered rings formed by two the chelating dithiolates. Complexes 3 and 4 consist of metalloligand [Ga(edt)₂]⁻ anion chelated to [M(PPh₃)₂]⁺via the sulfur atoms. Both tetrahedrally coordinated Ga and Cu(Ag) atoms are bridged by two sulfur atoms, forming a planar “GaS₂M” (M = Cu, Ag) core. Thermogravimetry analysis revealed that heterobimetallic complexes 3 and 4 decomposed to give the corresponding ternary metal sulfide materials.     

Unusual complexation of Cu(I) by pyrimidine/pyridine-pyrazole derived ligands exploiting the molecular function of 2-mercapto-4,6-dimethylpyrimidine - Syntheses, crystal structures and electrochemistry

Reaction of 2 equiv. amount of copper(II) chloride dihydrate with 2 equiv. of methyl-5-methyl-1-(4,6-dimethyl-2-pyrimidyl)pyrazole-3-carboxylate (DpymPzC) in presence of 1 equiv. of 2-mercapto-4,6-dimethylpyrimidine (DpymtH) at pH ∼ 6 afforded the tricoordinated copper(I) complex [Cu(DpymPzC)Cl] (1). The same reaction with copper(II) perchlorate hexahydrate, as the metal salt under the same equivalent ratio at pH ∼ 6 formed the tetracoordinated copper(I) complex [Cu(DpymPzC)₂]ClO₄ (2). In both the cases, the role of DpymtH is nothing but only to reduce the copper(II) salt in situ finally forming the copper(I) complex. On the other hand, the direct reaction between the copper(I) thiocyanate and DpymPzC in 2:2 equiv. ratio produced a tricoordinated copper(I) complex [Cu(DpymPzC)SCN] (3). In a similar reaction of 2 equiv. amount of copper(II) chloride dihydrate with 2 equiv. amount of ethyl-5-methyl-1-(2-pyridyl)pyrazole-3-carboxylate (PyPzC) in presence of 1 equiv. of DpymtH at pH ∼ 6, an intense red coloured microcrystalline compound (4) was obtained. In contrast, 1 equiv. of PyPzC and 2 equiv. of DpymtH on reaction with 1 equiv. of copper(II) chloride dihydrate at pH ∼ 6 produced a novel tetranuclear mixed coordinated [Cu₄(DpymtH)₄Cl₄] complex (5). Here DpymtH plays dual role - a reducing agent for the copper(II) salt followed by a chelating ligand towards copper(I) so formed in situ. Among the above species, 1, 2 and 5 are crystallographically characterized. In 1, the central copper atom is in distorted triangular planar geometry with N₂Cl chromophore whereas in 2, the same is in distorted tetrahedral geometry with N₄ chromophore. Notably, the extent of distortion from the ideal geometry is more in 2. In 5, which is in chair conformation, out of four copper atoms, two being in S₂Cl chromophore are tricoordinated and the remaining two are tetracoordinated with NS₂Cl chromophore. The metal centers are bridged through DpymtH in its ‘thione’ form. Interestingly, the chelation (in part) results in formation of the highly stable four-membered two chelate rings around the two tetracoordinated copper atoms in 5. The two copper centers along the long arm of the chair are separated through a distance of 5.190 Å while those in the short arm are at a length of 3.629 Å. The electronic, IR spectra and electrochemistry of the complexes 1, 2 and 5 have also been investigated.     

Oxalate, squarate and croconate complexes with bis(2-pyrimidylcarbonyl)amidatecopper(II): synthesis, crystal structures and magnetic properties

The preparation and magnetic properties of three copper(II) compounds of formulae [Cu₂(bpcam)₂(H₂O)₂(C₂O₄)] (1), [Cu₂(bpcam)₂(H₂O)₄(C₄O₄)] · 10 H₂O (2) and Cu₂(bpcam)₂(C₅O₅)(H₂O)₃ (3) [bpcam = bis(2-pyrimidyl)amidate, and are reported. The structures of two of them (1 and 2) have been solved by single crystal X-ray diffraction and consists of centrosymmetric discrete copper(II) dinuclear units bridged by bis-bidentate oxalate (1) and bis-monodentate squarate (2), with the bpcam group acting as a terminal tridentate ligand. Each copper atom in 1 exhibits a distorted elongated octahedral coordination geometry. Three bpcam nitrogen atoms and one oxalate oxygen define the basal plane while the other oxalate oxygen and a water molecule take up the axial positions. Each copper atom in 2 is in an elongated octahedral surrounding with three bpcam nitrogen atoms and one squarate oxygen in the equatorial plane and two water molecules in the axial positions. The intramolecular copper-copper separations are 5.677(1) (1) and 7.819(53) Å (2). Magnetic susceptibility measurements for 1-3 in the temperature range 1.9-290 K show the occurrence of weak ferromagnetic interactions through oxalato (J = +0.75 cm⁻¹) and squarato (J = +1.26 cm⁻¹), the Hamiltonian being defined by . These values are analyzed and discussed in the light of the available magneto-structural data for analogous systems. The quasi-Curie law observed in 3 (θ = −1.15 K) contrasts with the significant antiferromagnetic interaction through bis-chelating croconate in other structurally characterized croconate-bridged copper(II) complexes and rules out the presence of bridging croconate in this compound.     

Syntheses and structures of calcium and ytterbium bis(diphosphanylamido) complexes

Bis(diphosphanylamido) complexes of calcium and ytterbium, [{(Ph₂P)₂N}₂M(THF)₃] (M = Ca (1), Yb (2)), have been prepared by reaction of [K(THF)_nN(PPh₂)₂] (n = 1.25, 1.5) and MI₂. The single crystal X-ray structures of compounds 1 and 2 always show a η²-coordination of the ligand via the nitrogen and one phosphorus atom. In solution a dynamic behavior of the ligand is observed, which is caused by the rapid exchange of the two different phosphorus atoms.     

Syntheses, structures and magnetic properties of two copper(II) tricyanomethanide complexes with 2,2′-bipyrimidine as bridging ligands

Two copper(II) tricyanomethanide (tcm) complexes with 2,2′-bipyrimidine (bpym) as co-ligands Cu₄(bpym)₅(tcm)₈ · 2H₂O (1) and [Cu₂(bpym)₂(tcm)₄ · H₂O]_n (2) have been synthesized, and structurally and magnetically characterized. Compound 1 displays a tetranuclear structure, in which each middle copper(II) atom is coordinated by two bridging bpym molecules and two terminal tcm ligands to form a tetragonal bipyramidal geometry, while each side copper(II) atom is surrounded by one bridging bpym, one terminal bpym, one terminal bonded tcm and one terminal weakly coordinated tcm ligands to give a square bipyramidal geometry. In 1 the four neighbouring copper(II) atoms are joined to each other by the bpym molecules, which leads to the formation of a tetranuclear structure. Compound 2 features an infinite chain structure, in which two slightly different chains exist. In each chain the copper(II) atom is bonded to two bridging bpym molecules and two terminal tcm ligands to form a tetragonal bipyramidal geometry, the adjacent copper(II) atoms are linked each other by the bpym ligands to define an infinite chain structure. In 2 the distances between two neighbouring copper(II) atoms in one chain are different. Moreover these distances in one chain are also different from those of the other chain. Magnetic susceptibility measurements for the two complexes in the temperature range 2-300 K reveal the occurrence of significant antiferromagnetic interactions for 1 (J₁ = −20.42 cm⁻¹, J₂ = −5.29 cm⁻¹ and g = 2.22) and 2 (T > 50 K, θ = −20.00 K, C = 0.86 cm³ mol⁻¹ K), respectively.     

A phosphine complex of copper (I) bromide as single-source precursor for the aerosol-assisted chemical vapour deposition of phosphide

A new homobimetallic complex [Cu₂(tpp)₂(dppm)Br₂] (1) of copper(I) bromide with triphenylphosphine (tpp) and bis-diphenylphosphinomethane (dppm) has been synthesized and charaterized by m.p., elemental analysis, FT-IR, ¹H NMR, mass spectrometry, thermal studies and single crystal X-ray analysis. The solid-state molecular structure of 1, belonging to the monoclinic crystal system with space group P2₁/n, describes it as a neutral dinuclear species in which two copper atoms are bridged together through two bromides and a dppm ligand and each copper atom possesses a distorted tetrahedral geometry. Complex 1 was studied as a single-source precursor for the fabrication of phase pure thin films of Cu₃P by aerosol-assisted chemical vapour deposition. The films have been characterized by PXRD, SEM and ED-XRF analyses and found to exhibit the particles size range 200−400 nm with high purity and surface uniformity.     

Synthesis, crystal structure, cytotoxic activities and DNA-binding properties of new binuclear copper(II) complexes bridged by N,N′-bis(N-hydroxyethylaminoethyl)oxamide

Two new μ-oxamido-bridged binuclear copper(II) complexes with formulae of [Cu₂(heae)(pic)₂] (1) and [Cu₂(heae)(Me₂phen)₂](ClO₄)₂ · H₂O (2), where heae and pic stand for the anion of N,N′-bis(N-hydroxyethylaminoethyl)oxamide and 2,4,6-trinitrophenol, respectively, and Me₂phen represents 2,9-dimethyl-1,10-phenanthroline; have been synthesized and characterized by elemental analyses, molar conductivity measurements, IR and electronic spectra studies. The crystal structures of the two binuclear copper(II) complexes have been determined by X-ray single-crystal diffraction. In both the two binuclear complexes the central two copper(II) atoms are bridged by trans-heae. In complex 1 the coordination environment around each copper(II) atom can be described as a distorted octahedral geometry, while in complex 2 each copper(II) atom displays a square-pyramid stereochemistry. Hydrogen bonding and π-π stacking interactions link the binuclear copper(II) complex 1 or 2 into a 3D infinite network. The cytotoxicities of the two binuclear copper(II) complexes were tested by Sulforhodamine B (SRB) assays against human hepatocellular carcinoma cell SMMC-7721 and human lung adenocarcinoma cell A549. Both of the two binuclear copper(II) complexes exhibit potent cytotoxic effects against SMMC-7721 and A549 cell lines. The interactions of the two binuclear complexes with herring sperm DNA (HS-DNA) are investigated by using absorption and emission spectra and electrochemical techniques and viscometry. The results suggest that both the two binuclear copper(II) complexes interact with HS-DNA in the mode of intercalation with the intrinsic binding constants of 1.73 × 10⁵ M⁻¹ (1) and 1.92 × 10⁶ M⁻¹ (2). The influence of structural variation of the terminal ligands in the binuclear complexes on DNA-binding properties is preliminarily discussed.     

Synthesis, spectral and magnetic properties and crystal structures of copper(II) pyridinecarboxylates as potential antimicrobial agents

Synthesis and characterization of six new complexes [Cu{2,6-(MeO)₂nic}₂(H₂O)]₂ (1), [Cu{2,6-(MeO)₂nic}₂(H₂O)]₂ · 3DMF (2), where 2,6-(MeO)₂nic is 2,6-dimethoxynicotinate and DMF is N,N-dimethylformamide, [Cu(3-pyacr)₂(H₂O)₂]_n (3), where 3-pyacr is trans-3-(3-pyridyl)acrylate, [Cu(en)₂(H₂O)₂]X₂, where X is 2,6-(MeO)₂nic (4) or 3-pyacr (5) and en is ethylenediamine, and [Cu(3-pyacr)₂(dien)(μ-H₂O)_0.5]₂ · 7H₂O (6), where dien is diethylenetriamine are reported. The characterizations were based on elemental analysis, infrared, electronic and EPR spectra, and magnetic measurements over a temperature range of 1.8-300 K. Crystal structures of complexes 2, 4 and 6 have been determined by X-ray single crystal structure analysis. The available evidence supports dimeric structure of the acetate type for 1 and 2. Crystal structure of polymeric complex 3 has been determined from X-ray powder diffraction data. The 3-pyacr anions in pairs form bridges between two octahedrally surrounded copper(II) atoms in such a way that one 3-pyacr is coordinated to the first Cu^II by an oxygen atom of its carboxyl group and to the second Cu^II by the nitrogen atom of its pyridine ring, while the other is coordinated to the same two Cu^II atoms in a similar way, but the other way round. Environment about the copper(II) atom for 4 and 5 is a square bipyramid (4+2).In complex 6 both Cu^II central atoms are bridged only by an axial water molecule forming a dimeric structure with the considerably long separation of Cu^II atoms of 5.194 Å and the angle Cu1-O3-Cu1a of 150.79°. Moreover, results of the quantitative determination of antimicrobial activity of the complexes as well as above organic ligands alone are discussed.     

Synthesis and structural characterization of two new polynuclear metal thiosaccharinates: Hexakis(thiosaccharinato)hexasilver(I) and tetrakis(thiosaccharinato)tetracopper(I)

The title compounds, for short Ag₆(tsac)₆ (1) and [Cu₄(tsac)₄(MeCN)₂] · 2MeCN (2), were prepared by the reaction of thiosaccharin with Ag(I) or Cu(II) salts in different solvents. The new complexes were characterized by FT-IR, Raman, UV-Vis and NMR spectroscopy. Their crystal and molecular structures were determined by X-ray diffraction methods. The structures were solved from 1621 (1) and 7080 (2) reflections with I > 2σ(I) and refined to agreement R1-factors of 0.0261 (1) and 0.0456 (2). Ag₆(tsac)₆ molecule derives from the clustering of six Ag(tsac) moieties related to each other through the crystallographic 3-bar (S₆) symmetry operations of the space group. This results in a highly regular molecular structure where the silver atoms are at the corners of an octahedral core slightly compressed along one of its three-fold axis [inter-metallic Ag?Ag contacts of 3.1723(4) and 3.1556(4) Å]. The six thiosaccharinate ligands bridge neighboring Ag atoms along the C₃-axis through Ag-N bonds [d(Ag-N) = 2.285(2) Å] at one end and bifurcated Ag-S(thione)-Ag bonds [Ag-S distances of 2.4861(7) and 2.5014(8) Å] at the other end. In contrast, the 2 compound is arranged in the lattice as an irregular tetrameric copper complex [Cu₄(tsac)₄(MeCN)₂] where the metals show different environments. Two copper ions are four-fold coordinated to three tsac ions through the N-atom of one tsac [Cu-N distances of 2.112(3) and 2.064(3) Å] and the thione sulfur atom of the other two [Cu-S distances in the range from 2.284(1) to 2.358(1) Å] and to a MeCN solvent molecule [Cu-N distances of 1.983(4) and 2.052(3) Å]. The other two copper ions are in three-fold environment, one trans-coordinated to two tsac ions [Cu-N distances of 1.912(3) and 1.920(3) Å] and to the thione S-atom of a third ligand [d(Cu-S) = 2.531(1) Å], the other one to the thione sulfur atom of three tsac ligands [Cu-S distances in the range from 2.229(1) to 2.334(1) Å]. The clustering renders the metals to short distances from each other, the shorter Cu?Cu distance being 2.6033(7) Å, as to presume the existence of weak inter-metallic interaction within the cluster.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Novel carbon-centered heteroscorpionate ligands: Cu(I) complexes and luminescence properties

Herein, we describe the synthesis of N,N′,S donor ligands 2-(1-(3,5-diisopropyl-1H-pyrazol-1-yl)-3-(methythio)propyl)-4-methoxy-3,5-dimethylpyridine (L1) and 2-(1-(3,5-diisopropyl-1H-pyrazol-1-yl)-2-(methythio)ethyl)-4-methoxy-3,5-dimethylpyridine (L2). Cu(I) complexes were prepared by reacting L1 or L2 with [Cu(CH₃CN)₄]BF₄ or CuCl. The coordination behavior of the thioether arm of the ligands was found to determine the nuclearity of the resulting complexes, in which [Cu(L1)PPh₃]BF₄ (1) is polynuclear, [Cu(L2)PPh₃]BF₄ (2) is mononuclear, while [Cu(L1)]₂(BF₄)₂ (3), [Cu(L2)CH₃CN]₂(BF₄)₂ (4), and [Cu(L1)Cl]₂ (5) are dinuclear. In the dimeric complex [Cu(L2)Cl]₂ (6), the sulfur atoms are not metal-bound. Rather, the two bridging chloride ions link the two copper centers. Compounds 4-6 are luminescent in the solid state, and exhibit emission bands centered at 490 nm (4), 544 nm (5), and 562 nm (6), respectively. Their excitation spectra display bands at 280 nm and 380 nm. According to DFT calculations, the HOMO is distributed partially over the metal centers and partially over the chloride anions (5 and 6) or the sulfur atoms (4) of the ligands, while the LUMO is a π∗ antibonding pyridine orbital. This suggests that the emission properties are derived from metal-to-ligand charge-transfer (MLCT), halide-to-ligand charge-transfer (XLCT), and ligand-to-ligand charge-transfer (LLCT) excited states.     

One-pot syntheses of alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III) bearing p-cymene or pentamethylcyclopentadienyl groups

Reaction of [(p-cymene)RuCl₂(PPh₃)] (1) or [Cp^∗MCl₂(PPh₃)] (Cp^∗ = C₅Me₅) (3a: M = Rh; 4a: M = Ir) with 1-alkynes and PPh₃ were carried out in the presence of KPF₆, generating the corresponding alkenyl-phosphonio complexes, [(p-cymene)RuCl(PPh₃){CHCR(PPh₃)}](PF₆) (2a: R = Ph; 2b: R = p-tolyl) or [Cp^∗MCl(PPh₃){CHCPh(PPh₃)}](PF₆) (5: M = Rh; 6: M = Ir). Similar reactions of complexes [Cp^∗RhCl₂(L¹)] (3a: L¹ = PPh₃; 3c: L¹ = P(OMe)₃) with L² (L² = PPh₃, PMePh₂, P(OMe)₃) gave [Cp^∗RhCl(L¹)(L²)](PF₆) (7bb: L¹ = L² = PMePh₂; 7ca: L¹ = P(OMe)₃, L² = PPh₃; 7cc: L¹ = L² = P(OMe)₃). Alkenyl-phosphonio complex 5 was treated with P(OMe)₃ or 2,6-xylyl isocyanide, affording [Cp^∗RhCl(L){CHCPh(PPh₃)}](PF₆) (8a: L = P(OMe)₃; 8b: L = 2,6-xylNC). X-ray structural analyses of 2a, 6 and 8a revealed that the phosphonium moiety bonded to the C_β atom of the alkenyl group are E configuration.     

Synthesis, crystal structure, antibacterial assay and DNA binding activity of new binuclear Cu(II) complexes with bridging oxamidate

Two new binuclear copper complexes, [Cu₂(oxpn)(bpy)(pic)(H₂O)](pic) (1) and [Cu₂(oxpn)(Me₂bpy)(pic)](pic) (2) [H₂oxpn = N,N′-bis(3-aminopropyl)oxamide; Hpic = 2,4,6-trinitrophenol; bpy = 2,2′-bipyridine; Me₂bpy = 4,4′-dimethyl-2,2′-bipyridine], have been synthesized and characterized by elemental analyses, conductivity measurements, IR, UV-visible spectroscopy and single crystal X-ray analyses. Both complexes have similar molecular structures. In complex 1, the central two Cu(II) atoms are bridged by cis-oxpn²⁻ with the Cu1-Cu2 separation of 5.221 Å and the polyhedron of each copper atom is a square-pyramid. Similarly, complex 2 is a cis-oxpn²⁻-bridged binuclear complex with the Cu1-Cu2 separation of 5.196 Å. Cu1(II) central atom situated in a tetrahedral geometry is four-coordinated and Cu(II) atom situated in a square-pyramidal geometry is five-coordinated. Hydrogen bonding interactions and π-π stacking interactions link the binuclear copper complex 1 or 2 into a 2D infinite network. The antibacterial assays indicate that the two complexes showed better activities than their ligands. The interactions of the two binuclear complexes with herring sperm DNA (HS-DNA) have been studied by UV absorption titration, fluorescence titration and viscosity measurements. The results suggest that the two binuclear complexes bind to HS-DNA via an intercalative mode.     

The influence of substituents (R) at N atom of thiophene-2-carbaldehyde thiosemicarbazones {(C4H3S)HCN-N(H)-C(S)NHR} on bonding, nuclearity and H-bonded networks of copper(I) complexes

The nuclearity, bonding and H-bonded networks of copper(I) halide complexes with thiophene-2-carbaldehyde thiosemicarbazones {(C₄H₃S)HC²N³-N(H)-C¹(S)N¹HR} are influenced by R substituents at N¹ atom. Thiophene-2-carbaldehyde-N¹-methyl thiosemicarbazone (HttscMe) or thiophene-2-carbaldehyde-N¹-ethyl thiosemicarbazone (HttscEt) have yielded halogen-bridged dinuclear complexes, [Cu₂(μ-X)₂(η¹-S-Htsc)₂(Ph₃P)₂] (Htsc, X: HttscMe, I, 1; Br, 2; Cl, 3; HttscEt, I, 4; Br, 5; Cl, 6), while thiophene-2-carbaldehyde-N¹-phenyl thiosemicarbazone (HttscPh) has yielded mononuclear complexes, [CuX(η¹-S-HttscPh)₂] (X, I, 7a; Br 8; Cl, 9) and a sulfur bridged dinuclear complex, [Cu₂(μ-S-HttscPh)₂(η¹-S-HttscPh)₂I₂] 7b co-existing with 7a in the same unit cell. These results are in contrast to S-bridged dimers [Cu₂(μ-S-Httsc)₂(η¹-Br)₂(Ph₃P)₂] · 2H₂O and [Cu₂(μ-S-Httsc)₂(η¹-Cl)₂(Ph₃P)₂] · 2CH₃CN obtained for R = H and X = Cl, Br (Httsc = thiophene-2-carbaldehyde thiosemicarbazone) as reported earlier. The intermolecular CH_Ph?π interaction in 1-3 (2.797 Å, 1; 3.264 Å, 2; 3.257 Å, 3) have formed linear polymers, whereas the CH_Ph?X and N³?HCH interactions in 4-6 (2.791, 2.69 Å, 5; 2.776, 2.745 Å, 6, respectively) have led to the formation of H-bonded 2D polymer. The PhN¹H?π, interactions (2.547 Å, 8, 2.599 Å, 9) have formed H-bonded dimers only. The Cu?Cu separations are 3.221-3.404 Å (1-6).     

Synthesis, crystal structures and density functional theory study of dimeric copper(II) complexes of a tridentate Schiff-base ligand

Oxalate- or 4,4′-bipyridine-bridged dimeric copper(II) complexes, [Cu₂L₂(μ-ox)] (1) and [Cu₂L₂(μ-bipy)](BF₄)₂ (2) [where ox = oxalate, bipy = 4,4′-bipyridine, HL = N-(1H-pyrrol-2-ylmethylene)-2-pyridineethanamine, L⁻ = HL−H⁺], have been synthesised and characterised by elemental analysis, IR, UV-Vis and single crystal X-ray diffraction. Crystal structure determinations carried out on 1 and 2 reveal that 1 is an oxalate-bridged centrosymmetrical square pyramidal dimeric copper(II) complex while 2 is a 4,4′-bipyridine-bridged non-centrosymmetric square planar dinuclear copper(II) complex. Comparison of the optimised geometries with the corresponding crystal structures suggests that the B3LYP/LANL2DZ level can reproduce the structures of 1 and 2 on the whole. The electronic spectra of 1 and 2 predicted by B3LYP/LANL2DZ method show some blue shifts compared with their experimental data. Thermal analysis carried out on 1 shows that there is only one exothermal peak at about 260 °C and the residue is presumably Cu₂O₄N₆.     

X-ray structure and photoluminescence of copper(I) 2,6-bis(trifluoromethyl)benzoate

This report describes synthesis, X-ray crystallographic characterization, and photoluminescence of copper(I) 2,6-bis(trifluoromethyl)benzoate, [Cu(O₂C(2,6-CF₃)₂C₆H₃)] (1). Complex 1 has a polymeric structure comprised of axially bound dinuclear [Cu₂(O₂C(2,6-CF₃)₂C₆H₃)₂] units that is reminiscent of the well-known structure of copper(I) acetate, [Cu₂(O₂CMe)₂] (2). However, a close comparison of two analogues revealed a non-planarity of 1D chains and their orthogonal disposition in the crystal structure of 1 versus parallel alignment of planar chains in 2. Complex 1 exhibits green photoluminescence at ca. 560 nm upon UV-radiation (λ_ex = 350 nm) in the solid state.     

Synthesis, crystal structures and spectroscopic properties of copper(I) complexes containing β-dialdiminato supporting ligands

Two mononuclear neutral copper(I) complexes, Cu(L¹)PPh₃ (1), Cu(L²)(PPh₃)₂ (2) ([L¹]⁻ = [{N(C₆H₃ⁱPr₂-2,6)C(H)}₂CPh]⁻; [L²]⁻ = [{N(C₆H₅)C(H)}₂CPh]⁻) have been synthesized and structurally characterized by X-ray crystallography. In complex 1, the copper(I) atom is in a distorted three-coordinate trigonal planar environment, whereas in complex 2 with the less sterically hindered β-dialdiminato ligand, the copper(I) atom is the centre of a four-coordinate distorted tetrahedron. At room temperature complexes 1 and 2 in a film of PMMA exhibit green emission at 543 and 549 nm with lifetimes of 5.28 and 5.32 ns, respectively.     

Structural, photolysis and biological studies of the bis(μ2-chloro)-tris(triphenylphosphine)-di-copper(I) and chloro-tris(triphenylphosphine)-copper(I) complexes. Study of copper(I)-copper(I) interactions

Direct reaction of copper(I) chloride with triphenylphosphine (tpp) in molar ratio 2:3 and 1:3, results in the formation of the [(tpp)Cu(μ₂-Cl)₂Cu(tpp)₂] (1) and {[CuCl(tpp)₃]·(CH₃CN)} (2) complexes. The complexes have been characterized by melting point, FT-IR, UV-Vis spectroscopic data and X-ray crystallography. Complex 1 is di-nuclear. Two μ₂-Cl atoms bridge two copper(I) ions with tetrahedral and trigonal geometry respectively. The short copper-copper bond distance of 2.9039(6) ? in case of 1 indicates d¹⁰-d¹⁰ interaction between metal centers. Thus, our studies were extended here in the determination of the quasi-aromaticity, which results in strong Cu-Cu interactions, using the computational method of nucleus-independent chemical shifts (NICS). The NICS calculated at the inner region of the Cu₂Cl₂P₃ core in complex 1 is shielded up to −6.05 ppm. Complex 2 is mono-nuclear where three phosphorus and one chloride atoms form a tetrahedron around the copper(I) ion. Photolysis of both complexes 1 and 2, results in the formation of triphenylphosphine oxide.The complexes 1 and 2, were tested for their in vitro cytotoxic activity against leiomyosarcoma cells (LMS) and human breast adenocarcinoma cells (MCF-7). The type of LMS cell death caused by the complexes was also evaluated by use of a flow cytometry assay. The results show that at concentration of 5 μΜ of complexes 1 and 2, 34.1% (1) and 19.6 (2)% of LMS cells undergo programmed cell death (apoptosis), while at 10 μΜ, 80.4% (1) and 65.2% (2) of LMS cells undergo apoptosis. The light sensitivity of the complex is discussed in relation with the biological activity.