Structural studies on 1:1 and 2:1 adducts of silver(I) cyanide with alkanediamine ligands

The crystal structures of two 1:1 ligand-silver(I) cyanide complexes, [Ag(CN)(en)] (en = ethane-1,2-diamine) (1) and [Ag(CN)(pn)] (pn = propane-1,2-diamine) (2), and of two 2:1 ligand-silver(I) cyanide compounds, [(AgCN)₂ · tn] (tn = propane-1,3-diamine) (3) and [(AgCN)₂ · bn] (bn = butane-1,4-diamine) (4), were determined from single-crystal X-ray diffraction data, collected at 173 K. In 1 and 2, mononuclear AgCN complexes are formed, in which silver(I) is coordinated by one cyanide and one chelating alkanediamine donor ligand. However, in the dinuclear adducts of 3 and 4, two AgCN units are connected by one alkane-1,n-diamine bridging ligand (n = 3, 4). The resulting molecules of 1-4 are cross-linked via N-H?N hydrogen bonds. Apart from these intermolecular contacts, comparatively short Ag(I)-Ag(I) distances of 3.182(1) Å (in 1), 3.267(1) Å (in 2), 3.023(2) Å (in 3) and 3.050(2) Å (in 4) occur.     

Synthesis and characterization of ruthenium(II) complexes bearing the bis(2-pyridylmethyl)amine ligand

The reaction of [Ru(CO)₂Cl₂]_n with bis(2-pyridylmethyl)amine (bpma) in refluxing ethanol followed by anion exchange yields two products: cis,fac-[Ru(bpma)(CO)₂Cl]PF₆ (1a, 71%) and trans,fac-[Ru(bpma)(CO)₂Cl]PF₆ (1b, 29%). Reaction of 1a with AgBF₄ in acetone, followed by acetonitrile and then anion exchange gave cis,fac-[Ru(bpma)(CO)₂(CH₃CN)](PF₆)₂ (2a). In the same way, 1b afforded trans,fac-[Ru(bpma)(CO)₂(CH₃CN)](PF₆)₂ (2b). Reaction of depolymerized [Ru(CO)₂Cl₂]_n with bpma in ethanol at room temperature afforded cis,cis-[Ru(η²-bpma)(CO)₂Cl₂] (3). In refluxing ethanol, 3 was converted to cis,fac-[Ru(bpma)(CO)₂Cl]Cl (1a-Cl). Heating 3 in chlorobenzene afforded 1b-Cl, exclusively; heating 3 in ethylene glycol gave mainly 1a-Cl. Heating 1a-Cl in ethanol resulted in no isomerization, but heating in chlorobenzene gave a mixture of 3 and 1b-Cl. Anion exchange for PF₆ with 1a-Cl and 1b-Cl afforded 1a and 1b, respectively, whereas anion exchange for BPh₄ afforded 1a-BPh₄. Compounds 1a, 1b, 2a and 3 have been structurally characterized.     

O-Alkylthio- and O-alkylselenooxalate iron complexes: Structures of CpFe(CO)2ECOCO2Me and [CpFe(CO)2ECO]2

When the iron sulfide complexes (μ-S_x)[CpFe(CO)₂]₂ (x = 2, 3) are treated with O-alkyl oxalyl chlorides ROCOCOCl the complexes CpFe(CO)₂SCOCO₂R (1) [R = Me (a), Et (b)] are obtained. Similarly, the complexes CpFe(CO)₂SeCOCO₂R (2) are obtained from the analogous iron selenide (μ-Se)[CpFe(CO)₂]₂ reaction with the same reagents. Treatment of the iron selenide with half equivalent of oxalyl chloride produces the dimeric complex [CpFe(CO)₂SeCO]₂ (3). The new complexes, 1, 2 and 3, have been characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of 1a, 2a, 3 and [CpFe(CO)₂SCO]₂ (4) were determined by an X-ray crystal structure analysis.     

Main group derivatives of a cyclometallated iron carbonyl anion. Crystal structures of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(SnPh3) and two isomers of Fe(CO)2{P(OPh)3}{(PhO)2POC6H4}(I)

The iron hydrido complex HFe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄} (1), was rapidly deprotonated by DBU or [BzMe₃N][OH] in THF to afford the new carbonyl iron anion [Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}]⁻ ([2]⁻), containing an ortho-metallated triphenyl phosphite ligand. Complex [2]⁻ reacted with triorganostannyl and plumbyl salts and with halogens to give the octahedral Fe^II compounds Fe(CO)₂{P(OPh)₃}{(PhO)₂POC₆H₄}(X) (X=SnPh₃, 3; SnMe₃, 4; PbPh₃, 5; PbMe₃, 6; Cl, 7; Br, 8; I, 9). The Group 14 complexes 3-6 were obtained in one isomeric form in which the P^III-donor atoms are mutually cis, the carbonyl ligands are cis and the P(OPh)₃ and MR₃ (M=Sn, Pb; R=Ph, Me) groups are trans as determined by solution-state IR, ³¹P and ¹³C NMR spectroscopic data. This geometry was confirmed for 3 by a single crystal X-ray diffraction study. The halide complexes, however, were obtained as a mixture of isomers. The major isomer (7, X=Cl; 8a, X=Br; 9a, X=I) has cis P atoms, trans CO groups and the halide located trans to the phosphorus atom of the ortho-metallated phosphite ligand. The structure of 9a was confirmed by an X-ray diffraction study. Two other isomers, designated 8b (X=Br) and 9b (X=I), with cis P atoms and cis CO groups were isolated from the reactions of [2]⁻ with Br₂ and I₂, respectively. The structure of the latter was established by X-ray crystallography and is related to 9a by exchange of the P(OPh)₃ ligand and a carbonyl group such that the metal-bound C atom of the five-membered metallacycle is trans to CO. The stereo-geometry of 8b could not be unambiguously assigned from the spectroscopic data; however, two of the seven possible geometric isomers were suggested as plausible structures.     

The synthesis and characterization of iron cyanide building blocks: [K]2[CpFe(CN)3] and its pentamethylcyclopentadienyl (Cp*) analog

The synthesis of [K]₂[CpFe(CN)₃] (1) and its pentamethylcyclopentadienyl analog (2) has been described via the photolysis of the corresponding [K][CpFe(CO)(CN)₂] salts in methanol in the presence of KCN. The structure of complex 1 has been characterized by means of X-ray crystallography, where the potassium ions are interacting with the N atoms of the cyanide ligands. As expected, the average ν_CN stretching frequency in the anion is 16 cm⁻¹ higher than that in the more electron-donating pentamethylcyclopentadienyl derivative.     

Self-assembly of three hetero- and homopolynuclear cyanide bridged complexes of Fe-Cu and Cu: hydrothermal syntheses, structural characterization and properties

Reaction of Cu^II, K₃ [Fe(CN)₆] and bidentate diimine ligands by hydrothermal synthesis under different conditions affords one novel heteronuclear Fe^II-Cu^I complex, (bipy = 2,2′-bipyridine), and two homonuclear Cu^I complexes, [Cu^I(μ-CN)(bipy)]_n (2) and (3) (phen = 1,10-phenanthroline). Although all the three complexes are 1D cyanide bridged helical chains, they have different helicoids of pseudo-square, pseudo-trigonal and head-to-head bistrigonal for 1, 2 and 3, respectively. The structure of 1 is extended to 2D hexagonal meshed layers by the hydrogen bonding between terminal cyanides and lattice water molecules, which also contain π-π interactions between adjacent sheets. Cu^I ions in 1 are distorted trigonal planar coordinated by two bridging cyanides and one terminal cyanide, whereas that in 2 and 3 are pseudo-tetrahedral coordinated by two bridging cyanides and two N atoms of a diimine. Both the latter homometallic polymers exhibit similar chain structure, and these chains are close packed with their six adjacent chains in a parallel fashion along the c-axis to form a honeycomb network. It should be noted that complex 1 is the first cyanide bridged Fe^II-Cu^I complex of helical chain structure. The spectroscopic properties of complexes 1-3 have also been investigated.     

Coordination polymers of 1,8-bis(2-methylthioethoxy)anthraquinone and 1,5-bis(2-methylthioethoxy)anthraquinone with Ag(I): Synthesis and X-ray crystallography

The reaction of 2-(methylthioethanol) with 1,8-dichloroanthraquinone and 1,5-dichloroanthraquinone in THF with base produces 1,8-bis(2-methylthioethoxy)anthraquinone (1) and 1,5-bis(2-methylthioethoxy)anthraquinone (2), respectively. Silver(I) complexes of 1 and 2 have been synthesized after combination with [Ag(CH₃CN)₄]BF₄ in 1:1 M ratio to yield, [(1,8-bis(2-methylthioethoxy)anthraquinone)Ag]BF₄, (3) and [(1,5-bis(2-methylthioethoxy)anthraquinone)Ag·CH₃CN]BF₄, (4). X-ray crystal structures of the free ligand (1) and the Ag(I) complexes (3 and 4) are reported. The intraannular carbonyl group forms a coordinate-covalent bond with Ag(I) and, in the solid state, both silver(I) complexes are found as coordination polymers.     

Iron Se-bonded mono-selenocarbonates CpFe(CO)2SeCO2R: the first selenocarbonate complexes

The reactivity of the iron selenide complex (μ-Se)[CpFe(CO)₂]₂ toward chloroformates, ROCOCl, has been studied and the products CpFe(CO)₂SeCO₂R [R=Me (1), Et (2), iso-Bu (3), Ph (4), 2-C₆H₄Cl (5), 4-C₆H₄Cl (6), and 4-C₆H₄NO₂ (7)] have been obtained. The novel complexes, 1-7, have been characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structure of CpFe(CO)₂SeCO₂Et, 2, was determined by an X-ray crystal structure analysis.     

Synthesis, magnetic properties and crystal structures of two compounds: [Cu(en)(H2O)]2[Fe(CN)6]·4H2O and [Cu(en)2][KFe(CN)6] (en=ethylenediamine)

Two new heterometallic complexes, [Cu(en)(H₂O)]₂[Fe(CN)₆]·4H₂O (1) and [Cu(en)₂][KFe(CN)₆] (2), have been isolated from the reactions of CuCl₂ and en with K₃[Fe(CN)₆] in different molar ratios. Both complexes have been characterized by X-ray analyses, IR spectra and elemental analyses. Complex 1 is a cyanide bridged bimetallic assembly, its crystal structure consists of a two-dimensional polymeric sheet with two different rings, one a four-membered square ring and another a 12-membered hexagonal ring. The Fe(II) ion of 1 has two terminal, two linear bridging and two 1,1 en-on bridging cyanide groups. In the crystal structure of 2, the neighboring [Fe(CN)₆]³⁻ units are bridged by the K⁺ and the [K[Fe(CN)₆]]²⁻ units forming a three-dimensional network structure. The [Cu(en)₂]²⁺ units fill in the holes of the network acting as counter cations and charge compensations. Variable temperature magnetic susceptibility studies of 1 indicate that the complex exhibits ferromagnetic interaction between the Cu(II) ions.     

Mo- and W-N2 and -CO complexes with novel mixed P/N ligands: Structural properties and implications to synthetic nitrogen fixation

Four new ligands containing a pyridine or thiazole group and one or more N-(diphenylphosphinomethyl)amine functions have been prepared and employed for the synthesis of Mo(0) and W(0) carbonyl and dinitrogen complexes. For comparison coordination of the literature-known ligand N,N-bis(diphenylphosphinomethyl)-methylamine (PNP, 1) to such systems has been investigated as well. Two new ligands are N,N-bis(diphenylphosphinomethyl)-2-aminopyridine (pyNP₂, 2) and N,N′-bis(diphenylphosphinomethyl)-2,6-diaminopyridine (PpyP, 3). In a third new ligand, N-diphenylphosphinomethyl-2-aminothiazole (thiazNP, 4), the pyridine group is replaced by thiazol. Finally, the pentadentate ligand N,N,N′,N′-tetrakis(diphenylphosphinomethyl)-2,6-diaminopyridine (pyN₂P₄, 5) has been synthesized. Coordination of ligands 2, 3 and 4 to low-valent metal centers is investigated on the basis of the three molybdenum carbonyl complexes [Mo(CO)₃(NCCH₃)(pyNP₂)] (6), [Mo(CO)₄(PpyP)] (7) and [Mo(CO)₄(thiazNP)] (8), respectively, all of which are structurally characterized. Moreover, employing ligands 1 and 2 the two dinitrogen complexes [W(N₂)₂(dppe)(PNP)] (9) and [Mo(N₂)₂(dppe)(pyNP₂) (10), respectively, are prepared. Both systems are investigated by vibrational and NMR spectroscopy; in addition, complex 10 is structurally characterized.     

Synthesis and properties of new trinuclear Mo(II) complexes containing imidazole and benzimidazole ferrocene units

The reaction of FcCOCl (Fc = (C₅H₅)Fe(C₅H₄)) with benzimidazole or imidazole in 1:1 ratio gives the ferrocenyl derivatives FcCO(benzim) (L1) or FcCO(im) (L2), respectively. Two molecules of L1 or L2 can replace two nitrile ligands in [Mo(η³-C₃H₅)(CO)₂(CH₃CN)₂Br] or [Mo(η³- C₅H₅O)(CO)₂(CH₃CN)₂Br] leading to the new trinuclear complexes [Mo(η³-C₃H₅)(CO)₂(L)₂Br] (C1 for L = L1; C3 for L = L2) and [Mo(η³-C₅H₅O)(CO)₂(L)₂Br] (C2 for L = L1; C4 for L = L2) with L1 and L2 acting as N-monodentade ligands. L1, L2 and C2 were characterized by X-ray diffraction studies. [Mo(η³-C₅H₅O)(CO)₂(L1)₂Br] was shown to be a trinuclear species, with the two L1 molecules occupying one equatorial and one axial position in the coordination sphere of Mo(II). Cyclic voltammetric studies were performed for the two ligands L1 and L2, as well as for their molybdenum complexes, and kinetic and thermodynamic data for the corresponding redox processes obtained. In agreement with the nature of the frontier orbitals obtained from DFT calculations, L1 and L2 exhibit one oxidation process at the Fe(II) center, while C1, C3, and C4 display another oxidation wave at lower potentials, associated with the oxidation of Mo(II).     

Syntheses, structures, and properties of novel one dimensional copper cyanide coordination polymers

Three new one-dimensional copper coordination polymers have been prepared and fully characterized by single-crystal X-ray diffraction, IR spectroscopy, thermogravimetric analysis, and magnetic susceptibility measurements. The structure of [Cu(CN)₂(bpy)] (1) (bpy = 2,2-bipyridyl) (monoclinic P2₁/c, a = 8.9761(7) Å, b = 16.731(1) Å, c = 8.0224(6) Å, β = 114.437(1)°) consists of Cu(II) metal centers coordinated by three cyanide ligands and chelated by one bpy to form the monomers Cu(CN)₃(bpy) with distorted square pyramidal geometry. Each monomer shares two cyanide ligands with two adjacent monomers to form infinite -Cu(II)-CN-Cu(II)-CN-Cu zigzag chains along the c-axis. The one-dimensional structure of [Cu(CN)(bpy)] (2) (hexagonal P3₂, a = 14.4883(6) Å, b = 12.921(1) Å) is built of tetrahedral Cu(CN)₂bpy metal complexes in which Cu(I) metal centers are coordinated by one nitrogen and one carbon from two different CN ligands, and two nitrogens from one bpy. The two CN ligands act as bridging ligands between adjacent monomers to form helical chains along the 3₂ screw axis. The crystal structure of [Cu₂Cl(CN)(bpy)] (3) (orthorhombic Pbca, a = 17.853(2) Å, b = 6.9724 (9) Å, c = 18.7357 (9) Å) consists of two monomers, CuCl₂(CN) and Cu(bpy)(CN) that share a cyanide ligand to form Cu₂Cl₂(CN)(bpy) dimers. The dimers link to each other by sharing Cl ligands leading to the formation of infinite Cu-Cl-Cu chain decorated by the complex Cu(CN)(bpy). Variable-temperature magnetic measurement shows an overall ferromagnetic behavior for compound 1. The magnetic pathway of compound 1 is through the cyanide bridge connecting apical and equatorial positions of adjacent copper (II) ions.     

Dicarbonyliridium(I) complexes of pyridine ester ligands and their reactivity towards various electrophiles

The reaction of dimeric precursor [Ir(CO)₂Cl]₂ with two molar equivalent of the pyridine-ester ligands (L) like methyl picolinate (a), ethyl picolinate (b), methyl nicotinate (c), ethyl nicotinate (d), methyl isonicotinate (e) and ethyl isonicotinate (f) affords the tetra coordinated neutral complexes of the type [Ir(CO)₂ClL] (1a-f). The single crystal X-ray structure of 1d reveals that the Ir atom occupies the centre of an approximately square planar geometry with two CO groups cis- to each other. Intermolecular C-H?O and Ir?C interactions greatly stabilize the supramolecular structure of 1d in the solid state. The oxidative addition (OA) reactions of 1a-f with different electrophiles such as CH₃I, C₂H₅I and I₂ undergo decarbonylation of one CO group to generate the oxidized products of the type [Ir(CO)RClIL] where R = -CH₃ (2a-f); -C₂H₅ (3a-f) and [Ir(CO)ClI₂L] (4a-f). Kinetic study of the reaction of 1c-f with CH₃I indicates a first order reaction which follow the order 1d > 1c > 1f > 1e. All the synthesized complexes were characterized by elemental analyses, IR, and multinuclear NMR spectroscopy.     

Supramolecular assemblies of new 2-D complexes: Syntheses, crystal structures, spectroscopic and magnetic properties of {[MnAu2(CN)4(NITpPy)2(H2O)2]}n and {[Co(N(CN)2)2(NITpPy)2(H2O)2]}n

Two new complexes, {[MnAu₂(CN)₄(NITpPy)₂(H₂O)₂]}_n (1) and {[Co(N(CN)₂)₂(NITpPy)₂(H₂O)₂]}_n (2), have been synthesized and characterized. The single-crystal X-ray analysis for the complexes 1 and 2 demonstrates that each M(II) (M = Mn or Co) ion assumes a distorted octahedral MN₄O₂ coordination polyhedron. Four nitrogen atoms come from the cyanide groups and the pyridyl rings in a common plane, and two oxygen atoms come from the H₂O molecules in trans-positions. The structures of complexes 1 and 2 illustrate that aurophilicity and/or hydrogen bonding interactions play important roles in increasing dimensionality. Magnetic investigations on complexes 1 and 2 show the presence of weak antiferromagnetic interactions.     

Ruthenium(II) carbonyl chloride complexes containing pyridine-functionalised bidentate N-heterocyclic carbenes: Synthesis, structures, and impact of the carbene ligands on catalytic activities

A series of new ruthenium(II) carbonyl chloride complexes with pyridine-functionalised N-heterocyclic carbenes [Ru(Py-NHC)(CO)₂Cl₂], [Py-NHC = 3-methyl-1-(2-pyridyl)imidazol-2-ylidene, 1 (1a and 1b); 3-methyl-1-(2-picoyl)imidazol-2-ylidene, 2 (2a and 2b); 3-methyl-1-(2-pyridyl)benzimidazolin-2-ylidene, 3 (3b); 3-methyl-1-(2-picoyl)benzimidazolin-2-ylidene, 4 (4a and 4b); 1-methyl-4-(2-pyridyl)-1,2,4-triazoline-5-ylidene, 5 (5a and 5b)] have been prepared by transmetallation from the corresponding silver carbene complexes and characterized by NMR, IR spectroscopy and elemental analysis. In these complexes with bidentate Py-NHC ligands, one CO ligand is trans to the Py ligand. In 1a, 2a, 4a, and 5a, the NHC ligand is trans to the other CO ligand, thus leaving the two Cl⁻ ligands trans to each other. In 1b, 2b, 3b, 4b, and 5b, the NHC ligands are trans to one Cl⁻ ligand, and the two Cl⁻ ligands are cis to each other. The structures for 1b, 2b, 3b and 4b have been determined by single-crystal X-ray diffraction. These complexes are efficient catalysts in the transfer hydrogenation of acetophenone and their catalytic activities are found to be influenced by electronic effect of the N-heterocyclic carbene ligands.     

6-Halogenopyridin-2-olato complexes with the diruthenium(2+) core: Equilibria between head-to-head and head-to-tail structures

The dinuclear bis(6-X-pyridin-2-olato) ruthenium complexes [Ru₂(μ-XpyO)₂(CO)₄(PPh₃)₂] (X = Cl (4B) and Br (5B)), [Ru₂(μ-XpyO)₂(CO)₄(CH₃CN)₂] (X = Cl (6B), Br (7B) and F (8B)) and [Ru₂(μ-ClpyO)₂(CO)₄(PhCN)₂] (9B) were prepared from the corresponding tetranuclear coordination dimers [Ru₂(μ-XpyO)₂(CO)₄]₂ (1: X = Cl; 2: X = Br) and [Ru₂(μ-FpyO)₂(CO)₆]₂ (3) by treatment with an excess of triphenylphosphane, acetonitrile and benzonitrile, respectively. In the solid state, complexes 4B-9B all have a head-to-tail arrangement of the two pyridonate ligands, as evidenced by X-ray crystal structure analyses of 4B, 6B and 9B, in contrast to the head-to-head arrangement in the precursors 1-3. A temperature- and solvent-dependent equilibrium between the yellow head-to-tail complexes and the red head-to-head complexes 4A-7A and 9A, bearing an axial ligand only at the O,O-substituted ruthenium atom, exists in solution and was studied by NMR spectroscopy. Full ¹H and ¹³C NMR assignments were made in each case. Treatment of 1 and 2 with the N-heterocyclic carbene (NHC) 1-butyl-3-methylimidazolin-2-ylidene provided the complexes [Ru₂(μ-XpyO)₂(CO)₄(NHC)], X = Cl (11A) or Br (12A). An XRD analysis revealed the head-to-head arrangement of the pyridonate ligands and axial coordination of the carbene ligand at the O,O-substituted ruthenium atom. The conversion of 11A and 12A into the corresponding head-to-tail complexes was not possible.     

Synthesis and characterisation of pyrazolic palladium compounds containing alcohol functionality:: rotation around the Pd-N bond

The ligands 1-hydroxymethylpyrazole (hl¹), 1-(2-hydroxyethyl)pyrazole (hl²) and 1-(3-hydroxypropyl)pyrazole (hl³) react with [PdCl₂(CH₃CN)₂] to give trans-[PdCl₂(hl)₂] compounds. Due to a hindered rotation around the Pd-bond, these compounds present two different conformations in solution: anti and syn. The conformation presented depends on the relative disposition of the hydroxyalkylic chains of the two pyrazolic ligands. The present study was carried out on the basis of NMR experiments. The present paper reports the crystal structure of trans-[PdCl₂(hl²)₂]. The synthesis and characterisation of compounds [Pd(hl)₄](BF₄)₂ (hl = hl¹, hl² and hl³) starting from [Pd(CH₃CN)₄](BF₄)₂ and the corresponding chlorocomplexes trans-[PdCl₂(hl)₂] are also described.     

Cyano-bridged Fe(II)-Cu(II) bimetallic assemblies: honeycomb-like and pentanuclear structures

A 2D honeycomb-like compound [Fe(CN)₆{Cu(apn)}₃]_n(ClO₄)_2n(H₂O)_4n (1) (apn=N-(3-aminopropyl)-1,3-propanediamine) and a pentanuclear compound [Fe(CN)₆{Cu(dmen)₂}₄](ClO₄)₄ (2) (dmen=N,N-dimethylethylenediamine) have been prepared and characterized. In the synthesis, the use of ferricyanide or ferrocyanide yielded identical products due to reduction of Fe(III) ion to Fe(II) in water. For 1, all cyanide groups of ferrocyanide are bonded to six Cu(II) ions of which two symmetry-related Cu atoms are linked to nitrogen atoms of cyanide ligands bound to the neighboring Fe(II) center, resulting in the honeycomb structure. The variations of the geometries around Cu(II) centers are between ideal trigonal bipyramidal and square pyramidal structures, which may arise from the relative structural arrangements of flexible apn ligands. For 2, all the Cu(II) ions can be seen as square pyramidal geometries composed of basal least-squares planes from four dmen nitrogen atoms and apical nitrogen atoms from cyanide bridge. The Cu-NC angle around Cu centers in 2 is 127.9(7)°, much acuter than that of 1, which is presumably associated with steric interactions between the bulky methyl groups of the dmen ligands on the neighboring Cu ions. Both compounds exhibit very weak antiferromagnetic interactions in the low temperature range.     

Synthesis and characterization of three mononuclear Fe(III) complexes containing bipodal and tripodal ligands: X-ray molecular structure of the dichloro[N-propanamide-N,N-bis-(2-pyridylmethyl)amine]iron(III) perchlorate

In this work, we present the synthesis and characterization of three mononuclear iron(III) complexes: dichloro[N-propanamide-N,N-bis-(2-pyridylmethyl)amine]iron(III) perchlorate (1), trichloro[N-methylpropanoate-N,N-bis-(2-pyridylmethyl)amine]iron(III) (2) and trichloro[bis-(2-pyridylmethyl)amine]iron(III) (3). The complexes were characterized by cyclic voltammetry, conductivimetry, elemental analyses, and by electronic, infrared and Mössbauer spectroscopies. Complex 1 was also characterized by X-ray structural analysis, which showed an iron center coordinated to one amide, one tertiary amine, two pyridine groups and two chloride ions. While for 1 the X-ray molecular structure and the infrared spectrum confirm the coordination of the amide group by the oxygen atom, the infrared spectrum of 2 indicates that the ester group present in the ligand is not coordinated, resulting in a N₃Cl₃ donor set, similar to the one present in 3. However, in 3 there is a secondary amine while in 2 a tertiary amine exists. These structural differences result in distinguishable variations in the Lewis acidity of the iron center, which could be evaluated by the analysis of the redox potential of the complexes, as well as by Mössbauer parameters. Thus, the Lewis acidity decreases in the following order: 1 > 2 > 3. It is important to notice that 1 has the amide group coordinated to the iron center, a feature present in metalloenzymes as lipoxygenase and isopenicillin N synthase, and in a small number of mononuclear iron(III) complexes.     

Zinc(II) and mercury(II) coordination architectures with two pyridyl/benzimidazol-1-yl-based ligands: Crystal structures and photoluminescent properties

In our efforts to investigate the relationships between the structures of ligands and their complexes, two structurally related ligands, 1-(2-pyridylmethyl)-1H-benzimidazole (L¹) and 1-(4-pyridylmethyl)-1H-benzimidazole (L²), and their four complexes, [Zn(L¹)₂Cl₂] (1), [Hg(L¹)Br₂]_∞ (2), {[Zn(L²)Cl₂](CH₃CN)}_∞ (3) and [Hg(L²)Br₂]₂(CH₃CN)₂ (4) were synthesized and structurally characterized by elemental analyses, IR spectra and single-crystal X-ray diffraction analysis. Structural analyses show that 1 has a mononuclear structure, and 2 and 3 both take 1D structure. While 4 takes a dinuclear structure. 1, 2 and 4 were further linked into higher-dimensional supramolecular networks by weak interactions, such as C-H?Cl and C-H?Br H-bonding, C-H?π, and π?π stacking interactions. The structural differences of 1-4 may be attributed to the difference of the spatial positions of the terminal N donor atoms in the pendant pyridyl groups in L¹ and L², in which the pyridine rings may act as the directing group for coordination and the benzimidazole rings act as the directing group for π?π stacking and C-H?π interactions. The luminescent properties of the corresponding complexes and ligands have been further investigated.