Cyclometalated ruthenium(II) complexes of benzo[h]quinoline (bzqH)[Ru(bzq)(NCMe)4], [Ru(bzq)(LL)(NCMe)2], and [Ru(bzq)(LL)2] (LL = bpy, phen)

Cyclometalation of benzo[h]quinoline (bzqH) by [RuCl(μ-Cl)(η⁶-C₆H₆)]₂ in acetonitrile occurs in a similar way to that of 2-phenylpyridine (phpyH) to afford [Ru(bzq)(MeCN)₄]PF₆ (3) in 52% yield. The properties of 3 containing ‘non-flexible’ benzo[h]quinoline were compared with the corresponding [Ru(phpy)(MeCN)₄]PF₆ (1) complex with ‘flexible’ 2-phenylpyridine. The [Ru(phpy)(MeCN)₄]PF₆ complex is known to react in MeCN solvent with ‘non-flexible’ diimine 1,10-phenanthroline to form [Ru(phpy)(phen)(MeCN)₂]PF₆, being unreactive toward ‘flexible’ 2,2′-bipyridine under the same conditions. In contrast, complex 3 reacts both with phen and bpy in MeCN to form [Ru(bzq)(LL)(MeCN)₂]PF₆ {LL = bpy (4) and phen (5)}. Similar reaction of 3 in methanol results in the substitution of all four MeCN ligands to form [Ru(bzq)(LL)₂]PF₆ {LL = bpy (6) and phen (7)}. Photosolvolysis of 4 and 5 in MeOH occurs similarly to afford [Ru(bzq)(LL)(MeCN)(MeOH)]PF₆ as a major product. This contrasts with the behavior of [Ru(phpy)(LL)(MeCN)₂]PF₆, which lose one and two MeCN ligands for LL = bpy and phen, respectively. The results reported demonstrate a profound sensitivity of properties of octahedral compounds to the flexibility of cyclometalated ligand. Analogous to the 2-phenylpyridine counterparts, compounds 4-7 are involved in the electron exchange with reduced active site of glucose oxidase from Aspergillus niger. Structure of complexes 4 and 6 was confirmed by X-ray crystallography.     

Reactivity of the N-heterocyclic carbene complexes [Ru(IMes)2(CO)HX] (X = OH, Cl) with alkynes

Treatment of the 16-electron hydroxy hydride complex [Ru(IMes)₂(CO)H(OH)] (1, IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene) with HCCR affords the alkynyl species [Ru(IMes)₂(CO)H(CCR)] (R = Ph 3, SiMe₃, 4) and [Ru(IMes)₂(CO)(CCR)₂] (R = Ph, 5). Deuterium labelling studies show that the mono-alkynyl complexes are formed via hydrogen transfer from a coordinated alkyne ligand to Ru-OH, while bis-alkynyl formation is proposed to take place through hydrogen transfer to Ru-H. Both 3 and 5 readily coordinate CO to give the corresponding dicarbonyl species 6 and 7. Addition of HCCPh to the hydride chloride precursor [Ru(IMes)₂(CO)HCl] (2) results in a different reaction pathway involving alkyne insertion into the Ru-H bond to yield the alkenyl chloride complex [Ru(IMes)₂(CO)(CHCHPh)Cl] 8. Complexes 3-8 have been structurally characterised by X-ray crystallography.     

Synthesis and reactivity of five- and six-coordinate hydrido(vinyl) iridium(III) complexes

The reaction of the dihydrido iridium(III) precursor [IrH₂(Cl)(PiPr₃)₂] (5) with internal alkynes RCC(CO₂Me) (R = Me, CO₂Me) afforded the five-coordinate hydrido(vinyl) complexes [IrH(Cl){(E)-C(R)CH(CO₂Me)}(PiPr₃)₂] (6, 7), via insertion of the alkyne into one of the IrH bonds. Compounds 6 and 7 are also accessible by careful hydrogenation of the alkyne iridium(I) derivatives trans-[IrCl{RCC(CO₂Me)}(PiPr₃)₂] (9, 10), the latter being prepared from in situ generated trans-[IrCl(C₈H₁₄)(PiPr₃)₂] and RCC(CO₂Me). UV irradiation of 6 (R = CO₂Me) led to the formation of the isomer [IrH(Cl){κ²(C,O)-C(CO₂Me)CHC(OMe)O}(PiPr₃)₂] (3) having the vinyl ligand coordinated in a bidentate fashion. While 6 reacted with acetonitrile and CO to afford the six-coordinate iridium(III) compounds [IrH(Cl){(E)-C(CO₂Me)CH(CO₂Me)}(L′)(PiPr₃)₂] (11, 12), treatment of 6 with LiC₅H₅ gave the half-sandwich-type complex [(η⁵-C₅H₅)IrH{(E)-C(CO₂Me)CH(CO₂Me)}(PiPr₃)] (13) by, the loss of one PiPr₃. The reaction of 3 with CO under pressure resulted in the formation of [IrH(Cl){(Z)-C(CO₂Me)CH(CO₂Me)}(CO)(PiPr₃)₂] (14) in which, in contrast to the stereoisomer 12, the two CO₂Me substituents are trans disposed.     

Communication of metal ions in the dinuclear ruthenium complexes containing 4,4′-bipyridine, 1,4-diisocyanobenzene, and pyrazine bridging ligands: Synthesis, characterization and structure determination

Reaction of [Ru(2,2′-bipyridine)(2,2′:6′,2″-terpyridine)Cl]PF₆ (abbreviated to [Ru(bipy)(terpy)Cl]PF₆) with 0.5 equiv of the bidentate ligand L produces the dinuclear complexes [{Ru(bipy)(terpy)}₂(μ-L)](PF₆)₄ (L = 4,4′-bipyridine 1, 1,4-diisocyanobenzene 2 and pyrazine 3) in moderate yields. Treating [Ru(bipy)(terpy)Cl]PF₆ with equal molar of 1,4-diisocyanobenzene affords [Ru(bipy)(terpy)(CNC₆H₄NC)](PF₆)₂ (2a). These new complexes have been characterized by mass, NMR, and UV-Vis spectroscopy, and the structures of 1-3 determined by an X-ray diffraction study. Cyclic voltammetric studies suggest that metal communication between the two ruthenium ions increases from 1 to 2 to 3.     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Platinum(II) and palladium(II) complexes with (N,N') and (C,N,N')- ligands derived from pyrazole as anticancer and antimalarial agents: synthesis, characterization and in vitro activities

The study of the reactivity of three 1-(2-dimethylaminoethyl)-1H-pyrazole derivatives of general formula [1-(CH₂)₂NMe₂}-3,5-R₂-pzol] {where pzol represents pyrazole and RH (1a), Me (1b) or Ph (1c)} with [MCl₂(DMSO)₂] (MPt or Pd) under different experimental conditions allowed us to isolate and characterize cis-[M{κ²-N,N′-{[1-(CH₂)₂NMe₂}-3,5-R₂-pzol])}Cl₂] {MMPtPt (2a-2c) or Pd (3a-3c)} and two cyclometallated complexes [M{κ³-C,N,N′-{[1-(CH₂)₂NMe₂}-3-(C₅H₄)-5-Ph-pzol])}Cl] {MPt(II) (4c) or Pd(II) (5c)}. Compounds 4c and 5c arise from the orthometallation of the 3-phenyl ring of ligand 1c. Complex 2a has been further characterized by X-ray crystallography. Ligands and complexes were evaluated for their in vitro antimalarial against Plasmodium falciparum and cytotoxic activities against lung (A549) and breast (MDA MB231 and MCF7) cancer cellular lines. Complexes 2a-2c and 5c exhibited only moderate antimalarial activities against two P. falciparum strains (3D7 and W2). Interestingly, cytotoxicity assays revealed that the platinacycle 4c exhibits a higher toxicity than cisplatin in the three human cell lines and that the complex 2a presents a remarkable cytotoxicity and selectivity in lung (IC₅₀ = 3 μM) versus breast cancer cell lines (IC₅₀ > 20 μM). Thus, complexes 2c and 4c appear to be promising leads, creating a novel family of anticancer agents. Electrophoretic DNA migration studies in presence of the synthesized compounds have been performed, in order to get further insights into their mechanism of action.     

Synthesis, photoluminescence and electrochemiluminescence of ruthenium(II) polypyridyl complexes based on bipyridine derivatives with carbazole moieties

Six complexes (1-6) with the type of [Ru(bpy)₂L]X₂ (1-3: L = L1-L3, X = Cl⁻; 4-6: L = L1-L3, X = PF₆⁻) were synthesized based on 2,2′-bipyridine and three 2,2′-bipyridine derivatives L1, L2 and L3 (L1 = 5,5′-dibromo-2,2′-bipyridine, L2 = 5-bromo-5′-carbazolyl-2,2′-bipyridine, L3 = 5,5′-dicarbazolyl-2,2′-bipyridine). The complexes 1-6 were characterized by ¹H NMR, MS(ESI) and IR spectra, along with the X-ray crystal structure analysis for 1, 5 and 6. Their photophysical properties and electrochemiluminescence (ECL) properties were investigated in detail. In the UV-Vis absorption spectra, all complexes 1-6 show strong intraligand (π → π^∗) transitions and metal-ligand charge transfer (MLCT, dπ (Ru) → π^∗) bands. Upon the excitation wavelengths at ∼508 nm, all complexes 1-6 exhibit typical MLCT emission of ruthenium(II) polypyridyl complexes. The introduction of carbazole moieties improves the MLCT absorption and emission intensity. The ruthenium(II) complexes 1-6 exhibit good electrochemiluminescence (ECL) properties in [Ru(bpy)₂L]²⁺/tri-n-propylamine (TPrA) acetonitrile solution and the complexes with PF₆⁻ showed higher ECL emission intensity than that of the complexes with Cl⁻ based on the same ligands.     

Novel stable five-coordinate diorgano cobalt(III) complexes: Formation, structure, and reaction with carbon monoxide

A series of new five-coordinate acyl vinyl cobalt(III) complexes Co{η¹-C(CCPh)CHPh}[C(O)CCO] L₂(L = PMe₃) (6-10) were prepared via formal insertion of diphenylbutadiyne into Co-H function of mer-octahedral hydrido-acyl(phenolato)-cobalt(III) complexes. The complexes are diamagnetic. One square pyramidal structure of complex 6 was confirmed by X-ray diffraction analysis. These complexes are stable in solid state. In solution, six-coordinate acyl vinyl carbonyl cobalt(III) complex 11 is approved through the reaction of complex 7 with CO and the structure of complex 11 was determined by X-ray method.     

Synthesis, molecular structure, substitution and C-C coupling reactions of ruthenium complexes containing (η-C9H7)Ru(PPh3) as a molecular unit

The 2-methallyl complex [(η⁵-C₉H₇)Ru(η³-2-MeC₃H₄)(PPh₃)] (3), prepared from [(η⁵-C₉H₇)Ru(PPh₃)₂Cl] (2) and 2-MeC₃H₄MgCl, reacts with HX (X = Cl, CF₃CO₂) in the presence of ethene to give the chiral-at-metal compounds [(η⁵-C₉H₇)Ru(C₂H₄)(PPh₃)X] (4, 5) in nearly quantitative yields. Treatment of 2 with AgPF₆ and ethene affords [(η⁵-C₉H₇)Ru(C₂H₄)(PPh₃)₂]PF₆ (6), which reacts with acetone to give the substitution product [(η⁵-C₉H₇)Ru(OCMe₂)(PPh₃)₂]PF₆ (7). The molecular structure of 7 has been determined crystallographically. Whereas treatment of 4 with CH(CO₂Et)N₂ yields the olefin complex [(η⁵-C₉H₇)Ru{η²-(Z)-C₂H₂(CO₂Et)₂}(PPh₃)Cl] (8), the reactions of 4 and 5 with Ph₂CN₂, PhCHN₂ and (Me₃Si)CHN₂ lead to the formation of the carbeneruthenium(II) derivatives [(η⁵-C₉H₇)Ru(CRR′)(PPh₃)Cl] (9-11) and [(η⁵-C₉H₇)Ru(CRR′)(PPh₃)(κ¹-O₂CCF₃)] (12-14), respectively. Treatment of 9 (R = R′ = Ph), 10 (R = H, R′ = Ph) and 11 (R = H, R′ = SiMe₃) with MeLi produces the hydrido(olefin) complexes [(η⁵-C₉H₇)RuH(η²-CH₂CPh₂)(PPh₃)] (15), [(η⁵-C₉H₇)RuH(η²-CH₂CHPh)(PPh₃)] (18a,b) and [(η⁵-C₉H₇)RuH(η²-CH₂CHSiMe₃)(PPh₃)] (19) via C-C coupling and β-hydride shift. The analogous reactions of 11 with PhLi gives the η³-benzyl compound [(η⁵-C₉H₇)Ru{η³-(Me₃Si)CHC₆H₅}(PPh₃)] (20). The η³-allyl complex [(η⁵-C₉H₇)Ru(η³-1-PhC₃H₄)(PPh₃)] (17) was prepared from 10 and CH₂CHMgBr by nucleophilic attack.     

Synthesis and characterization of ruthenium(II) complexes bearing the bis(2-pyridylmethyl)amine ligand

The reaction of [Ru(CO)₂Cl₂]_n with bis(2-pyridylmethyl)amine (bpma) in refluxing ethanol followed by anion exchange yields two products: cis,fac-[Ru(bpma)(CO)₂Cl]PF₆ (1a, 71%) and trans,fac-[Ru(bpma)(CO)₂Cl]PF₆ (1b, 29%). Reaction of 1a with AgBF₄ in acetone, followed by acetonitrile and then anion exchange gave cis,fac-[Ru(bpma)(CO)₂(CH₃CN)](PF₆)₂ (2a). In the same way, 1b afforded trans,fac-[Ru(bpma)(CO)₂(CH₃CN)](PF₆)₂ (2b). Reaction of depolymerized [Ru(CO)₂Cl₂]_n with bpma in ethanol at room temperature afforded cis,cis-[Ru(η²-bpma)(CO)₂Cl₂] (3). In refluxing ethanol, 3 was converted to cis,fac-[Ru(bpma)(CO)₂Cl]Cl (1a-Cl). Heating 3 in chlorobenzene afforded 1b-Cl, exclusively; heating 3 in ethylene glycol gave mainly 1a-Cl. Heating 1a-Cl in ethanol resulted in no isomerization, but heating in chlorobenzene gave a mixture of 3 and 1b-Cl. Anion exchange for PF₆ with 1a-Cl and 1b-Cl afforded 1a and 1b, respectively, whereas anion exchange for BPh₄ afforded 1a-BPh₄. Compounds 1a, 1b, 2a and 3 have been structurally characterized.     

A hemiacetalate complex of Ru(II)

Reaction of cis-Ru(bisox)₂Cl₂, where bisox is 4,4,4′,4′-tetramethyl-2,2′-bisoxazoline, with excess of pyridine-2-carboxaldehyde (py-2-al) in 1:1 (v/v) methanol-water mixture under nitrogen atmosphere and subsequent addition of excess of NH₄PF₆ give [Ru(bisox)₂(py-2-al)](PF₆)₂ · H₂O (1). Refluxing of 1 in dehydrated methanol in presence of triethylamine yields the corresponding hemiacetalate complex: [Ru(bisox)₂ (pyridine-2-(α-methoxymethanolato))]PF₆ · 1.5H₂O (2). Both the complexes have been characterised by single crystal X-ray crystallography, FTIR and NMR. In cyclic voltammetry in acetonitrile at a glassy carbon electrode, 2 displays a quasireversible Ru(II/III) couple at 1.08 V versus NHE which is not observed in 1. A tentative mechanism is proposed for the conversion of 1 to 2. DFT calculations with the LanL2DZ basis set have been performed to investigate these observations theoretically.     

Synthesis and single crystal structures of first examples of tridentate ligands of (Te, N, S) type and their complexes with palladium(II), platinum(II) and ruthenium(II)

The First examples of (Te, N, S) type ligands, 2-CH₃SC₆H₄CHNCH₂CH₂TeC₆H₄-4-OCH₃ (L¹) and 2- CH₃SC₆H₄CHNHCH₂CH₂TeC₆H₄-4-OCH₃ (L²), and their metal complexes, [PdCl(L¹)]PF₆ · CHCl₃ · 0.5H₂O (4), [PtCl(L¹)]PF₆ (5), [PdCl(L²)]ClO₄.CHCl₃ (6), [PtCl(L²)]ClO₄ (7), and [Ru(p-cymene)(L²)](PF₆)₂ · CHCl₃ (8), have been synthesized and characterized. The single crystal structures of 4, 6 and 8 have revealed that both the ligands coordinate in them in a tridentate (Te, N, S) mode. The geometry around Pd in both the complexes has been found to be square planar, whereas for Ru in a half sandwich complex 8, it is found to be octahedral. Between two molecules of 4 there are intra and inter molecular weak Te?Cl [3.334(3) and 3.500(3) Å, respectively] interactions along with weak intermolecular Pd?Te [3.621(2) Å] interactions. The Pd-Te bond lengths are between 2.517(6) and 2.541(25) Å and the Ru-Te bond length is 2.630(6) Å. The crystal structure of [PdCl₂(4-MeO-C₆H₄- TeCH₂CH₂NH₂)] (9) is also determined. It is formed when KPF₆ is not added in the synthesis of 4 and Pd-complex of L¹ is recrystallized. Apart from Te?Cl secondary interactions, C-H?π interactions also exist in the crystal of 9.     

Thiol end-capped titanium-copper complexes: Synthesis, solid state structure and electrochemical behavior

The synthesis of acetylene, acyl-thiol and thiol end-capped titanium-copper π-tweezer complexes of the structural type {[Ti](μ-σ,π-CCR)₂}CuSC₆H₄-4-R′ ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; 3: R = SiMe₃, R′ = CCH; 5a: R = SiMe₃, R′ = SC(O)Me; 5b: R = ^tBu, R′ = SC(O)Me), {[Ti](μ-σ,π-CCSiMe₃)₂}CuSC₆H₄-C₆H₄-4-SH (7) and ({[Ti](μ-σ,π-CCR)₂}CuSC₆H₄)₂ (8) is described. Homobimetallic 3, 5a and 5b are accessible via the reaction of {[Ti](μ-σ,π-CCR)₂}CuMe (1a: R = SiMe₃, 1b: R = ^tBu) with stoichiometric amounts of Me(O)CS-1-C₆H₄-4-CCH (2) and C₆H₄-1,4-(SC(O)Me)₂ (4), respectively. Within these reactions the copper-sulfur bond formation is accompanied by the elimination of acetone. If 1a is treated with the dithiol (HS-C₆H₄)₂ (6) in a ratio of 1:1 or 2:1 than dinuclear 7 and tetranuclear 8 are produced upon formation of methane. Both types of reaction allow in a straightforward manner the synthesis of analytically pure samples in high yield. In addition, complex 8 is also formed, when equimolar amounts of 7 are reacted with1a.The solid state structure of 5a is reported. This complex possesses a low-valent CuSC₆H₄-4-SC(O)Me entity with copper(I) in a planar surrounding. All other geometrical features are in agreement with the expected data relevant for Ti-Cu organometallic π-tweezer complexes.Cyclic voltammetric studies were carried out with 3-8. The results are discussed with respect to intramolecular interactions between the various electrochemically active reaction sites.     

Acid dissociation of 2,2′-dipyridylamine in non-aqueous medium when chelated to some Ru(II)N4 cores

[Ru(2,2′-bipyridine)₂(Hdpa)](BF₄)₂ · 2H₂O (1), [Ru(1,10-phenanthroline)₂(Hdpa)] (PF₆)₂ · CH₂Cl₂ (2) and [Ru(4,4,4′,4′-tetramethyl-2,2′- bisoxazoline)₂(Hdpa)] (PF₆)₂ (3) are synthesized where Hdpa is 2,2′-dipyridylamine. The X-ray crystal structures of 1 and 2 have been determined. Hdpa in 1 and 2 is found to bind the metal via the two pyridyl N ends. Comparing the NMR spectra in DMSO-d₆, it is concluded that 3 has a similar structure. The pK_a values (for the dissociation of the NH proton in Hdpa) of free Hdpa and its complexes are determined in acetonitrile by exploiting molar conductance. These correlate linearly with the chemical shift of the NH proton in the respective entities.     

Synthesis and structural diversity of 2-pyridylmethylideneamine complexes of zinc(II) chloride

The addition reactions of zinc(II) chloride to N-substituted pyridine-2-carbaldimines [Py-CHNR, R = Me (1a), Ph (1b), Bz (1c), allyl (1d)] lead to different complexes dependent on the N-bound substituent R. The 1:1 complexes show molecular structures of the type [(Py-CHNR)ZnCl₂] for R = methyl (2a), phenyl (2b), and allyl (2d) with a distorted tetrahedral environment for the zinc atom. The zinc complex with the N-methylated pyridine-2-carbaldimine also forms a dimer of the type [(Py-CHNR)ZnCl₂]₂ (2a)₂ with a square pyramidal coordination sphere of zinc. A 3:2 stoichiometry is observed for R = benzyl and an ion pair of the type [Zn(Py-CHNR)₃]²⁺ [ZnCl₄]²⁻ (2c) is found in the solid state.     

p-Quinquephenyl diamine, C6H5-p-C6H4-p-C6H2(2,3-NH2)-p-C6H4-C6H5, and its corresponding diimine-Ru(II) complex: Crystal structure and electrochemical and optical properties

The molecular structure of an o-phenylenediamine unit-containing oligophenylene (1), Ph-Ph′-Ph′(2,3-NH₂)-Ph′-Ph (Ph = phenyl; Ph′ = p-phenylene; Ph′(2,3-NH₂) = 2,3-diamino-p-phenylene), was determined by X-ray crystallography. 1 has a twisted structure, and forms an intermolecular C-H?π interaction network. The -NH₂ group of 1 was air-oxidized to an imine, NH, group in the presence of [RuCl₂(bpy)₂] (bpy = 2,2′-bipyridyl) and gave a ruthenium(II)-benzoquinone diimine complex [Ru(2)(bpy)₂](PF₆)₂ (2: Ph-Ph′-Ph′(2,3-imine)-Ph′-Ph). The molecular structure of [Ru(2)(bpy)₂](PF₆)₂ was confirmed by X-ray crystallography. [Ru(2)(bpy)₂](PF₆)₂ underwent two-step electrochemical reduction with E^1/2 = −0.889 V and −1.531 V versus Fc⁺/Fc. The E^1/2’s were located at higher potentials by 91 mV and 117 mV, respectively, than those of reported [Ru(bqdi)(bpy)₂](PF₆)₂ (bqdi = benzoquinone diimine). Electrochemical oxidation of [Ru(2)(bpy)₂](PF₆)₂ occurred at a lower potential by 180 mV than that of [Ru(bqdi)(bpy)₂](PF₆)₂. Occurrence of the easier reduction and oxidation of [Ru(2)(bpy)₂](PF₆)₂ than those of [Ru(bqdi)(bpy)₂](PF₆)₂ is ascribed to the presence of a large π-conjugation system in 2.     

Bis(diphenylphosphino)acetonitrile oxides, -sulfides and -imines: Their formation and structural features, and the remarkable structures of two lithiated derivatives

Oxidation of bis(diphenylphosphino)acetonitrile (dppmCN, 8) yields the corresponding bis-phosphinoxide system (9). Analogously, treatment of dppmCN with sulfur gave bis(diphenylphosphinsulfido)acetonitrile (10). Both compounds show very similar structures in the solid state, featuring strongly distorted U-shaped conformations. The Staudinger reaction of dppmCN with phenylazide gives rise to the formation of the bis(diphenylphosphinimino)acetonitrile product that was obtained in its ylidic P-NH tautomer form in solution and in the crystalline state. Deprotonation of the bis(diphenylphosphinchalcogenido)acetonitriles 9 and 10 gave the corresponding [NC-(Ph₂PX)₂]⁻ anions (X = O, S). Their lithio compounds show a remarkable structural diversity in dependence of the chalcogene element used. The oxygen-containing compound (13) forms an oxygen-coordinated Li⁺-bridged 12-membered heteromacrocyclic structure, whereas Li⁺ avoids sulfur coordination in 14 and exhibits a THF-stabilized Li⁺-NC-R adduct structure in the crystal.     

Synthesis and characterisation of bis(2,2′-bipyridine)(4-carboxy-4′-(pyrid-2-ylmethylamido)-2,2′-bipyridine)ruthenium(II) di(hexafluorophosphate): Comparison of spectroelectrochemical properties with related complexes

The new complex, [Ru^II(bpy)₂(4-HCOO-4′-pyCH₂ NHCO-bpy)](PF₆)₂ · 3H₂O (1), where 4-HCOO-4′-pyCH₂NHCO-bpy is 4-(carboxylic acid)-4′-pyrid-2-ylmethylamido-2,2′-bipyridine, has been synthesised from [Ru(bpy)₂(H₂dcbpy)](PF₆)₂ (H₂dcbpy is 4,4′-(dicarboxylic acid)-2,2′-bipyridine) and characterised by elemental analysis and spectroscopic methods. An X-ray crystal structure determination of the trihydrate of the [Ru(bpy)₂(H₂dcbpy)](PF₆)₂ precursor is reported, since it represented a different solvate to an existing structure. The structure shows a distorted octahedral arrangement of the ligands around the ruthenium(II) centre and is consistent with the carboxyl groups being protonated. A comparative study of the electrochemical and photophysical properties of [Ru^II(bpy)₂(4-HCOO-4′-pyCH₂NHCO-bpy)]²⁺ (1), [Ru(bpy)₂(H₂dcbpy)]²⁺ (2), [Ru(bpy)₃]²⁺ (3), [Ru(bpy)₂Cl₂] (4) and [Ru(bpy)₂Cl₂]⁺ (5) was then undertaken to determine their variation upon changing the ligands occupying two of the six ruthenium(II) coordination sites. The ruthenium(II) complexes exhibit intense ligand centred (LC) transition bands in the UV region, and broad MLCT bands in the visible region. The ruthenium(III) complex, 5, displayed overlapping LC bands in the UV region and a LMCT band in the visible. 1, 2 and 3 were found, via cyclic voltammetry at a glassy carbon electrode, to exhibit very positive reversible formal potentials of 996, 992 and 893 mV (versus Fc/Fc⁺) respectively for the Ru(III)/Ru(II) half-cell reaction. As expected the reversible potential derived from oxidation of 4 (−77 mV (versus Fc/Fc⁺)) was in excellent agreement with that found via reduction of 5 (−84 mV (versus Fc/Fc⁺)). Spectroelectrochemical experiments in an optically transparent thin-layer electrochemical cell configuration allowed UV-Vis spectra of the Ru(III) redox state to be obtained for 1, 2, 3 and 4 and also confirmed that 5 was the product of oxidative bulk electrolysis of 4. These spectrochemical measurements also confirmed that the oxidation of all Ru(II) complexes and reduction of the corresponding Ru(III) complex are fully reversible in both the chemical and electrochemical senses.     

Diffusion NMR studies on neutral and cationic square planar palladium(II) complexes

Diffusion NMR investigations were carried out in CD₂Cl₂ for a series of neutral (1-7) and cationic (8-10) square planar palladium complexes. Diffusion data were elaborated through a modified Stokes-Einstein equation that takes into account the size and shape of molecules. The hydrodynamic volume at infinite dilution of all complexes was found to be similar to the crystallographic volume and always much larger than the van der Waals volume. The self-aggregation tendency of [Pd(N,C⁻)(N,N)][PF₆] ionic complexes [(N,C⁻) = (C₆H₄-(Ph)C(O)-CN-Et); 8, (N,N) = 2,2′-bipirydine; 9, (N,N) = (2,6-(iPr)₂-C₆H₃)NC(Me)-C(Me)N(2,6-(iPr)₂-C₆H₃); 10, (N,N) = (2,6-(iPr)₂-C₆H₃)NC(R′)-C(R′)N(2,6-(iPr)₂-C₆H₃), R′₂ = naphthalene-1,8-diyl] was investigated by performing ¹H and ¹⁹F diffusion experiments as a function of the concentration. Clear evidence for the formation of ion triples containing two cationic units was obtained for 8, most likely due to the establishment of a weak Pd?O interaction. The tendency to form ion triples was much reduced in 9 and 10, having an increased steric hindrance in the apical positions. While 9 showed the usual tendency to afford a mixture of free ions and ion pairs, solvated ions were the predominant species in the case of 10 even at high concentration values (approaching 100 mM).     

Synthesis, structure, and characterization of some ruthenium arene complexes of N-(arylmethylene)-2-(methylthio)anilines and 2-(methylthio)aniline

A series of cationic, half-sandwich ruthenium complexes with the general formula [(η⁶-p-cymene)RuCl(MeSC₆H₄2-NCHAr)][PF₆] (3a-h), have been prepared from the reaction of [(η⁶-p-cymene)RuCl₂]₂ with various N,S-donor Schiff base ligands derived from 2-(methylthio)aniline and several substituted benzaldehydes. The related aniline complex [(η⁶-p-cymene)RuCl(MeS-C₆H₄-2-NH₂)][PF₆] (4) was synthesized from 2-(methylthio)aniline. All of the ruthenium complexes were characterized by IR, ¹H NMR, and UV/Vis spectroscopies. The molecular structure of complex 4 was determined by X-ray crystallography.