Heteroleptic Cu(I) complexes containing phenanthroline-type and 1,1′-bis(diphenylphosphino)ferrocene ligands: Structure and electronic properties

Three new heteroleptic Cu(I) complexes containing one phenanthroline and one diphosphine type ligand ([Cu(N-N)(P-P)]⁺) have been prepared. In particular, one ligand is constituted by 1,10-phenanthroline (1), 2,9-dimethyl-1,10-phenanthroline (2) and 2,9-diphenethyl-1,10-phenanthroline (3) and the other ligand is in all cases 1,1′-bis(diphenylphosphino)ferrocene (dppf). Therefore, copper and iron metal centres are quite close one another, as evidenced by X-ray crystal diffraction. The structure together with the electrochemical and photophysical properties of these complexes have been compared to that of the corresponding complexes where dppf has been replaced by bis[2-(diphenylphosphino)-phenyl]ether (POP). Cyclic voltammetric experiments evidenced that the first oxidation process is located on the ferrocene moiety and that oxidation of Cu(I) is moved to more positive potential values and a chemical reaction is coupled to the electron transfer process. The absorption spectra show a metal-to-ligand charge transfer (MLCT) band, typical of Cu(I) phenanthroline complexes, at a higher energy compared to the homoleptic [Cu(N-N)₂]⁺ species. No emission at either room temperature or 77 K has been observed for compounds 2 and 3, contrary to the high luminescence observed for the corresponding POP complexes. This result is consistent with a photoinduced energy transfer from the Cu(I) complex to the ferrocene moiety.     

Syntheses and characterization of luminescent dinuclear and polynuclear Cu(I) complexes containing 4,4′-bis(diphenylphosphino)biphenylene bridge

The dinuclear complex [Cu₂(dpbp)₂(NCMe)₄][BF₄]₂ (1) has been prepared by treating [Cu(NCMe)₄][BF₄] with 4,4′-bis(diphenylphosphino)biphenylene (abbreviated as dpbp). Reactions of 1 with 2,2′-bipyridine and 1,1′-bis(diphenylphosphino)ferrocene (abbreviated as dppf) afford [Cu₂(dpbp)₂(2,2′-bipy)₂][BF₄]₂ (2) and [Cu₂(dpbp)(dppf)₂][BF₄]₂ (3), respectively. In contrast, compound 1 reacts with tetra(2-pyridyl)ethyl-1,4-diaminobutane (abbreviated as tpyda) to produce the polymeric complex {[Cu₂(dpbp)(tpyda)][BF₄]₂}_n (4). Compounds 1-4 are photoluminescent with the emission band (λ_max) in the range 510-554 nm. The crystal structures of 1 and 4 have been determined by an X-ray diffraction study.     

Diverse dimensionalities and structures in copper coordination polymers incorporating substituted aliphatic dicarboxylate ligands and 4,4′-bipyridine

Hydrothermal synthesis has afforded a series of divalent copper coordination polymers with substituted glutarate ligands and the rigid rod tether 4,4′-bipyridine (bpy): {[Cu(Hdmg)₂(bpy)]·H₂O}_n (1, dmg = 3,3-dimethylglutarate), {[Cu₂(dmg)(bpy)₂](ClO₄)]_n (2), [Cu₂(emg)₂(bpy)]_n (3, emg = 3-ethyl, 3-methylglutarate) and [Cu₂(cda)₂(bpy)]_n (4, cda = 1,1-cyclopentanediacetate). All materials were characterized by single-crystal X-ray diffraction. Compound 1 manifests μ₂-oxygen bridged [Cu₂(Hdmg)₄] “X”-patterns connected into a ribbon motif by bpy linkers. On the other hand, 2 possesses mixed-valence [Cu^ICu^IICu^IICu^I] tetrameric clusters bridged by dmg ligands and pillared into an 8-connected body-centered cubic (bcu) cationic lattice by bpy linkers. Compounds 3 and 4 are structurally very similar, displaying chain motifs with {Cu₂(CO₂)₄} paddlewheels connected by dicarboxylates, in turn conjoined into (4,4)-grid coordination polymer layers by bpy tethers. Variable temperature magnetic data indicate the presence of very strong antiferromagnetic coupling within the {Cu₂(CO₂)₄} paddlewheels in the latter two complexes, with g = 2.30(2) and J = −352(3) cm⁻¹ for 3 and g = 2.35(2) and J = −352(5) cm⁻¹ for 4. Significant structural contrasts are evident when compared to previously reported divalent copper/4,4′-bipyridine coordination polymers with unsubstituted or 2-methyl substituted glutarate ligands.     

Syntheses, characterization and crystal structures of copper(I) o-(diphenylphosphino)benzaldehyde complexes

The complexes [Cu(PCHO)₂(NCMe)][BF₄] (1) and [Cu(PCHO)₃][BF₄] (2) have been prepared by treating [Cu(NCMe)₄][BF₄] with two and three equivalents of Ph₂P(o-C₆H₄)C(O)H (abbreviated as PCHO) at room temperature, respectively. The reaction of 1 and (Ph₂PC₅H₄)₂Fe (abbreviated as DPPF) affords [Cu(PCHO)(DPPF)][BF₄] (3). The molecular structures of 1-3 have been determined by an X-ray diffraction study. The aldehyde groups in 1 are pendant, while one of the formyl groups in 2 is weakly coordinated to the copper ion through the oxygen atom. On the other hand, the copper atom in 3 is strongly chelated by both DPPF and PCHO ligands.     

Syntheses and structural characterization of dicopper(I) bis(diphenylphosphino)acetylene complexes containing tricyclic, cyclic and linear frameworks

The complexes [Cu₂(dppa)₃(CH₃CN)₂][BF₄]₂ (1) and Cu₂(dppa)₃(O₃SCF₃)₂ (2) have been prepared in good yields by treating [Cu(MeCN)₄][BF₄] and [Cu(MeCN)₄][O₃SCF₃], respectively, with Ph₂PCCPPh₂ (abbreviated as dppa) at room temperature. The reaction of 1 with di-2-pyridyl ketone (abbreviated as dpyk) produces [Cu₂(dppa)₂(dpyk)₂][BF₄]₂ (3), and with 1,1′-bis(diphenylphosphino)ferrocene (abbreviated as dppf) produces [Cu₂(dppa)(dppf)₂][BF₄]₂ (4). The molecular structures of 1-4 have been determined by an X-ray diffraction study. Compounds 1 and 2 form a helical Cu₂(dppa)₃ metallatricycle, compounds 3 forms a Cu₂(dppa)₂ metallacycle, and compound 4 contains a linear Cu₂(dppa) skeleton.     

Structural variations and spectroscopic properties of copper(I) complexes with bis(schiff base) ligands

Six copper(I) complexes {[Cu₂(L1)(PPh₃)₂I₂] · 2CH₂Cl₂}_n (1), {[Cu₂(L2)(PPh₃)₂]BF₄}_n (2), [Cu₂(L3)(PPh₃)₄I₂] · 2CH₂Cl₂ (3), [Cu₂(L4)(PPh₃)₄I₂] (4), [Cu₂(L5)(PPh₃)₂I₂] (5) and [Cu₂(L6)(PPh₃)₂I₂] (6) have been prepared by reactions of bis(schiff base) ligands: pyridine-4-carbaldehyde azine (L1), 1,2-bis(4′-pyridylmethyleneamino)ethane (L2), pyridine-3-carbaldehyde azine (L3), 1,2-bis(3′-pyridylmethyleneamino)ethane (L4), pyridine-2-carbaldehyde azine (L5), 1,2-bis(2′-pyridylmethyleneamino)ethane (L6) with PPh₃ and copper(I) salt, respectively. Ligand L1 or L2 links (PPh₃)₂Cu₂(μ-I)₂ units to form an infinite coordination polymer chain. Ligand 3 or 4 acts as a monodentate ligand to coordinate two copper(I) atoms yielding a dimer. Ligand 5 or 6 chelates two copper(I) atoms using pyridyl nitrogen and imine nitrogen to form a dimer. Complexes 1-4 exhibit photoluminescence in the solid state at room temperature. The emission has been attributed to be intraligand π-π* transition mixed with MLCT characters.     

Supramolecular architectures constructed on the skeleton of Silver nitrate, 4,4′-bipyridine and triphenylphosphine/1,2-bis(diphenylphosphino)ethane: Synthesis, structural characterization and non-covalent interactions

In the presence of PPh₃ and Ph₂PCH₂CH₂PPh₂ (dppe); AgNO₃ and 4,4′-bipyridine (bpy) react to form [Ag(PPh₃)(bpy)_1/2(ONO₂)]_n (1) and [Ag(dppe)_1/2(bpy)_1/2(ONO₂)]_n (2). The compositions of these complexes are supported by their elemental analysis. The structures are determined by spectroscopic (IR, ¹H NMR, UV-Vis) and X-ray crystallographic data. A zig-zag ladder type structure observed in 1 changes into straight ladder type structure in 2 in which [Ag(dppe)_1/2(ONO₂)]_n chains are bridged by bpy with Ag?Ag distance of 11.48 Å. However in 1, the two zig-zag chains are linked via π-π interactions at 3.82 Å between phenyl rings of terminal PPh₃ ligands. Both complexes luminesce in DMSO solution. Photoluminescence of a representative complex 2 is also measured.     

A series of 4,5-diazafluoren-9-one-derived ligands and their Cu(I) complexes: Synthesis, characterization and photophysical properties

In this paper, a series of 4,5-diazafluoren-9-one-derived (Dafo-derived) diimine ligands and their corresponding Cu(I) complexes with bis(2-(diphenylphosphanyl)phenyl) ether as the auxiliary ligand are synthesized. Relationships between diimine ligands and photophysical properties of their corresponding Cu(I) complexes are discussed in detail. It is found that the introduction of an electron-donor moiety into one diimine ligand leads to a dramatic red shift of the absorption of corresponding Cu(I) complex, while, an electron-acceptor moiety demonstrates no obvious effect on Cu(I) complex absorption when introduced into diimine ligand. In addition, it is found that the intraligand charge transfer of Dafo-derived ligands acts as an efficient luminescence quencher within their corresponding Cu(I) complexes, leading to luminescence absence from metal-to-ligand-charge-transfer (MLCT) excited state.     

Communication of metal ions in the dinuclear ruthenium complexes containing 4,4′-bipyridine, 1,4-diisocyanobenzene, and pyrazine bridging ligands: Synthesis, characterization and structure determination

Reaction of [Ru(2,2′-bipyridine)(2,2′:6′,2″-terpyridine)Cl]PF₆ (abbreviated to [Ru(bipy)(terpy)Cl]PF₆) with 0.5 equiv of the bidentate ligand L produces the dinuclear complexes [{Ru(bipy)(terpy)}₂(μ-L)](PF₆)₄ (L = 4,4′-bipyridine 1, 1,4-diisocyanobenzene 2 and pyrazine 3) in moderate yields. Treating [Ru(bipy)(terpy)Cl]PF₆ with equal molar of 1,4-diisocyanobenzene affords [Ru(bipy)(terpy)(CNC₆H₄NC)](PF₆)₂ (2a). These new complexes have been characterized by mass, NMR, and UV-Vis spectroscopy, and the structures of 1-3 determined by an X-ray diffraction study. Cyclic voltammetric studies suggest that metal communication between the two ruthenium ions increases from 1 to 2 to 3.     

Syntheses, characterization and DNA binding of mono- and diruthenium(II) complexes containing 2,2′-bis(1,2,4-triazino[5,6-f]phenanthren-3-yl)-4,4′-bipyridine and 2,2′-bipyridine ligands

A novel bridging ligand 2,2′-bis(1,2,4-triazino[5,6-f]phenanthren-3-yl)-4,4′-bipyridine (btpb) and its mononuclear ruthenium(II) complex [Ru(bpy)₂(btpb)]²⁺ (Rubtpb; bpy = 2,2′-bipyridyl) and dinuclear ruthenium(II) complex [Ru(bpy)₂(btpb)Ru(bpy)₂]⁴⁺ (Ru₂btpb) have been synthesized and characterized by elemental analyses, fast atom bombardment or electrospray mass spectra, ¹H NMR, and electronic spectroscopy. Binding behaviors of the mono- and dinuclear complexes with calf thymus DNA (CT-DNA) have been investigated by absorption spectra, viscosity measurements, and equilibrium dialysis experiments. As the concentration of DNA is increased, the electronic absorption spectra bands at the metal-ligand charge transfer of the mononuclear complex Rubtpb at 501.0 nm exhibit hypochromism of about 17.4% and bathochromism of 2.0 nm, the dinuclear complex Ru₂btpb at 511.0 nm exhibits hypochromism of about 24.8% and bathochromism of 1.0 nm. The increasing amounts of the complexes on the relative viscosities of CT-DNA are much smaller than that of the classic intercalators. The experiments suggest that the Rubtpb and Ru₂btpb may be bound to DNA by non-intercalating binder.     

Hydrogen-bonded copper(II) and nickel(II) complexes and coordination polymeric structures containing reduced Schiff base ligands

Complexes [Cu(HSas)(H₂O)] · 2H₂O (H₃Sas = N-(2-hydroxybenzyl)-l-aspartic acid) (1), [Cu(HMeSglu)(H₂O)] · 2H₂O (H₃MeSglu = (N-(2-hydroxy-5-methylbenzyl)-l-glutamic acid) (2), [Cu₂(Smet)₂] (H₂Smet = (N-(2-hydroxybenzyl)-l-methionine) (3), [Ni(HSas)(H₂O)] (4), [Ni₂(Smet)₂(H₂O)₂] (5), and [Ni(HSapg)₂] (H₂Sapg = (N-(2-hydroxybenzyl)-l-aspargine) (6) have been synthesized and characterized by chemical and spectroscopic methods. Structural determination by single crystal X-ray diffraction studies revealed 1D coordination polymeric structures in 2 and 4, and hydrogen-bonded network structure in 5 and 6. In contrast to previously reported coordination compounds with similar ligands, the phenol remains protonated and bonded to the metal ions in 2 and 4, and also probably in 1. However, the phenolic group is non-bonded in 6.     

Photoluminescent coordination polymers of d metals with 4,4′-dipyridylsulfide (dps)

Reactions of AgClO₄, Zn(CH₃COO)₂ · H₂O and CuI with the ligand 4,4′-dipyridylsulfide (dps) in 1:1 ratio give rise to coordination polymers 1-3 and 5, the structures of which were characterized by X-ray crystallography. Polymers [Ag₂(dps)₂](ClO₄)₂ · MeCN (1) and [Ag₂(dps)₂(μ₂-MeCN)(MeCN)](ClO₄)₂ · MeCN · H₂O (2) are pseudo-supramolecular isomers, differing from each other in the coordination geometry of silver atom and the packing pattern. Both 1 and 2 are zigzag coordination polymers bridged by weak Ag?Ag, Ag?S or Ag?NC-CH₃ interactions to form double stranded coordination polymers. While [Zn(dps)(CH₃COO)₂] (3) is a zigzag single stranded coordination polymer, [Zn(dps)₂(H₂O)₂](ClO₄)₂ · H₂O (4) is an unusual mononuclear complex with a box-like structure. Interesting intermolecular hydrogen bonding present in the compounds 3 and 4 leads to 3D hydrogen-bonded network structure.Coordination polymer [Cu₂I₂(dps)₂] (5) is a non-interpenetrating (4,4) net. Photoluminescence properties of the compounds 1-5 have been examined in solid states at room temperature. These compounds have been found to exhibit yellow and blue photoluminescence.     

Synthesis, structures and spectroscopic properties of platinum(II), copper(I) and zinc(II) complexes bearing 4-(p-dimethylaminophenyl)-6-phenyl-2,2′-bipyridine ligand

The reactions of 4-(p-dimethylaminophenyl)-6-phenyl-2,2′-bipyridine (HL) with three metal salts of platinum(II), copper(I) and zinc(II) provide the new complexes [Pt(L)(PPh₃)]ClO₄ (1), [Cu(HL)₂]BF₄ (2), [Cu(HL)(PPh₃)]BF₄ (3) and [Zn(HL)₂](ClO₄)₂ (4). All the structures of these four complexes have been characterized by single crystal X-ray diffraction, and their spectroscopic properties were investigated. Especially for complex 1, upon protonation, the excited state can be tuned from the intraligand charge transfer (ILCT) to the metal-to-ligand charge transfer (MLCT), and such switching in the excited state is acid/base reversible. The time-dependent density functional theory (TD-DFT) calculation was used to interpret the absorption spectra of complex 1, and the calculated result is consistent with those of experiments results. In contrast with 1, the lowest energy absorption at 410-650 nm of complexes 2 and 3 can be assigned to MLCT excited state. In solid state or solution complex 4 exhibits intense photoluminescence attributed to a ILCT transition in nature.     

The synthesis, structure and luminescence of two 1D pyrazine-connected Cu(I)-dppm polymers

Two pyrazine-connected 1D copper(I) dppm polymers, {[Cu₃(dppm)₃Br₂][Cu₂(dppm)(pyz)Br₂] Br · (CH₃OH)₂}_n (1) and {[Cu₂(dppm)₂(NO₃)₂(pyz)](pyz)}_n (2) (dppm = bis(diphenylphosphino)methane, pyz = pyrazine) have been synthesized and characterized by X-ray crystallography, luminescence, IR, ¹H, and ³¹P NMR. Structure analysis shows that complex 1 is a neutral 1D polymer in sine-curve-like form, while complex 2 is in linear form. And photoluminescent study of them shows that they exhibit fluorescent emission bands at ca. 434 nm and 431 nm, respectively.     

One-dimensional helical coordination polymers of cobalt(II) and iron(II) ions with 2,2′-bipyridyl-3,3′-dicarboxylate (BPDC)

One-dimensional (1-D) helical coordination polymers, [M^II(H₂O)₃(BPDC)]_n · nH₂O (M = Co (1), Fe (2)), have been prepared by the self-assembly of cobalt(II) and iron(II) ions, respectively, with 2,2′-bipyridyl-3,3′-dicarboxylic acid (H₂BPDC) in an aqueous solution. X-ray crystal structures of compounds 1 and 2 show that each metal ion displays a distorted octahedral coordination geometry including three water oxygen atoms, one oxygen atom of the carboxylate of a BPDC²⁻ belonging to the adjacent metal ion and two nitrogen atoms from the BPDC²⁻ acting as a chelating ligand. In 1 and 2, one carboxylate oxygen atom of coordinated BPDC²⁻ binds to the neighboring metal ion, which give rise to 1-D helical coordination polymers. The helical chains of 1 and 2 are linked by the hydrogen bonding interactions between the carboxylate oxygen atom of the BPDC²⁻ ion belonging to a chain and the water molecule of the adjacent helical chain, which lead to 2-D networks extending along the ab plane. The supramolecules 1 and 2 show isomorphous structures regardless of the metal ions.     

Synthesis and magnetic characterization of Ln(III) complexes with 4,4′-bipyridine and crotonato as bridging ligands

The crystal structure and magnetic characterization of an isostructural series of general formula {[Ln(crot)₃(H₂O)(bpy)_1/2]₂}_n (crot, crotonate (C₄H₅O₂); bpy, 4,4′-bipyridine (C₁₀H₈N₂); Ln, Nd, Gd, Ho, Er, Y) is presented. The ninefold Ln coordination polyhedra form dimeric entities that are connected throughout the bpy units into infinite polymeric chains. All (but the yttrium) reported compounds present a weak antiferromagnetic interaction connecting metal centres.     

Spectroscopic and electrochemical properties of heteroleptic cationic copper complexes bis-(diphenylphosphino)alkane-(2,2′-biquinoline)copper(I). Crystal structure of bis(diphenylphosphino)ethane-(2,2′-biquinoline)copper(I) perchlorate

A series of [Cu^(I)(2,2′-biquinoline)(L)](ClO₄) complexes (L = bis(diphenylphosphino)methane (bppm), 1,2-bis(diphenylphosphino)ethane (bppe), 1,4-bis(diphenylphosphino)butane (bppb)) have been synthesized and characterized by elemental analysis, conductivity, ESI-mass, NMR and UV-Vis spectroscopies, cyclic voltammetry, X-ray diffraction ([Cu^(I)(2,2′-biquinoline)(bppe)](ClO₄)) and DFT calculations. These compounds are monometallic species in a distorted tetrahedral arrangement, in contrast with related compounds found as dinuclear according to diffraction studies. The spectroscopic properties are not directly correlated with the length of alkyl chain bridge between the bis-diphenylphosphine groups. In this way, the chemical shift of some 2,2′-biquinoline protons and the metal to ligand charge transfer (Cu to 2,2′-biquinoline) follows the order [Cu(2,2′-biquinoline)(bppm)](ClO₄), [Cu(2,2′-biquinoline)(bppb)](ClO₄), [Cu(2,2′-biquinoline)(bppe)](ClO₄). The same dependence is followed by the potentials to Cu(II)/Cu(I) couple. These results are discussed in terms of inter-phosphorus alkane chain length and tetrahedral distortions on copper.     

Hydrothermal synthesis and structure of a Cu(I) bromide coordination polymer, [(tpyprz)3Cu10Br10] (tpyprz = tetra-2-pyridylpyrazine)

The hydrothermal reaction of CuBr₂ and tpyprz in the presence of NH₄VO₃ and HF for 72 h at 170 °C provided [(tpyprz)₃Cu₁₀Br₁₀] (1) in 20% yield. The two-dimensional structure of 1 may be described as Cu(I)-tpyprz chains, linked through {Cu₄Br₅}⁻ clusters in the ac-plane and decorated with {Cu₃Br₅}²⁻ clusters projecting from one face of the layer in the b-direction. The Cu(I) sites exhibit distorted trigonal coordination {CuBr₃} and distorted tetrahedral geometries, {CuBr₂N₂} and {CuN₄}. Crystal data for 1: monoclinic space group C2, a = 12.7561(8) Å, b = 19.359(1) Å, c = 15.860(1) Å, β = 97.178(1)°, V = 3885.8(4) Å³, Z = 2, D_calc = 2.222 g cm⁻³, μ(Mo Kα) = 78.75 cm⁻¹.     

Synthesis of a new tetradentate bis(imino-phosphine) ligand and its complexation with copper(I) ions

Schiff base condensation of m-phenylenediamine with two equivalents of o-(diphenylphophino)benzaldehyde products the potentially tetradentate molecule 1,3-(Ph₂P(o-C₆H₄)CHN)₂C₆H₄ (1) in high yield. The reaction of 1 and [Cu(NCMe)₄]BF₄ affords the dinuclear complex [(1,3-(Ph₂P(o-C₆H₄)CHN)₂C₆H₄)₂Cu₂](BF₄)₂ (2) through coordination of the imino-phosphine groups. The structure of 2 has been determined by an X-ray diffraction study.     

Syntheses and characterization of Co(III) binuclear complexes with bis(catecholate) ligands containing an acetylene linker

Three binuclear Co(III) complexes with 5,5′-(buta-1,3-diyne-1,4-diyl)bis(3-tert-butylcatechol) (L1), 5,5′-(2,5-dimethoxy-1,4-phenylene)bis(ethyne-2,1-diyl)bis(3-tert-butyl-catechol) (L2) and 5,5′-(4,4′-(buta-1,3-diyne-1,4-diyl)bis(2,5-dimethoxy-4,1-phenylene))bis(ethyne-2,1-diyl)bis(3-tert-butyl-catechol) (L3) have been prepared. The triple bond-containing L1, L2 and L3 ligands were synthesized by a cross-coupling reaction. These complexes were characterized by elemental analyses, electrochemical measurements, ¹H NMR and UV-Vis spectra. In [Co₂(bpy)₄(L1)]²⁺, electrochemical oxidation of the complexes occurs at the bridges as two closely spaced one-electron couples. UV-Vis spectra reveal that chemical oxidation of [Co₂(bpy)₄(L1)]²⁺ using Ag⁺ occurs as a two-electron process forming [Co₂(bpy)₄(L1^Cat,SQ)]³⁺ or [Co₂(bpy)₄(L1^SQ,SQ)]⁴⁺. On the other hand, [Co₂(bpy)₄(L2)]²⁺ and [Co₂(bpy)₄(L3)]²⁺ exhibit different oxidation behavior under the same experimental conditions. In this report we discuss the role of the distance between the two metal atoms on the oxidative behavior of binuclear Co(III) complexes.