Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Synthesis and reactivity with amines of new diiron alkynyl methoxy carbene complexes

The new diiron alkynyl methoxy carbene complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CCR′}(Cp)₂]⁺ (R = 2,6-Me₂C₆H₃ (Xyl), R′ = Tol, 3a; R = Xyl, R′ = Ph, 3b; R = Xyl, R′=Buⁿ, 3c; R = Xyl, R′=SiMe₃, 3d; R = Me, R′ = Tol, 3e; R = Me, R′ = Ph, 3f) are obtained in two steps by addition of R′CCLi (R′ = Tol, Ph, Buⁿ, SiMe₃) to the carbonyl aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂]⁺ (R = Xyl, 1a; Me, 1b), followed by methylation of the resulting alkynyl acyl compounds [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(O)CCR′}(Cp)₂] (R = Xyl, R′ = Tol, 2a; R = Xyl, R′ = Ph, 2b; R = Xyl, R′ = Buⁿ, 2c; R = Xyl, R′ = SiMe₃, 2d; R = Me, R′ = Tol, 2e; R = Me, R′ = Ph, 2f). Complexes 3 react with secondary amines (i.e., Me₂NH, C₅H₁₀NH) to give the 4-amino-1-metalla-1,3-dienes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CHC(R′)(NMe₂)}(Cp)₂]⁺ (R = Xyl, R′ = Tol, 4a; R = Xyl, R′ = Ph, 4b; R = Me, R′ = Ph, 4c) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(Tol)(NC₅H₁₀)}(Cp)₂]⁺, 5. The addition occurs stereo-selectively affording only the E-configured products. Analogously, addition of primary amines R′NH₂ (R′ = Ph, Et, Prⁱ) affords the 4-(NH-amino)-1-metalla-1,3-diene complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(R)(NHR′)}(Cp)₂]⁺ (R = Ph, 6a; Et, 6b; Prⁱ, 6c). In the case of 6a, only the E isomer is formed, whereas a mixture of the E and Z isomers is present in the case of 6b,c, with prevalence of the latter. Moreover, the two isomeric forms exist under dynamic equilibrium conditions, as shown by VT NMR studies. Complexes 6 are deprotonated by strong bases (e.g., NaH) resulting in the formation of the neutral vinyl imine complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(NR)(Tol)}(Cp)₂] (R = Ph, 7a; Et, 7b; Prⁱ, 7c); the reaction can be reverted by addition of strong acids. X-ray crystal structures have been determined for 3a[CF₃SO₃] · Et₂O, 4c[CF₃SO₃], 6a[BF₄] · CH₂Cl₂, 6c[CF₃SO₃] · 0.5Et₂O and 7a · CH₂Cl₂.     

Synthesis of cyclopentadienyl ruthenium complexes containing 5-membered N-heterocyclic thiolates

Mononuclear ruthenium-thiolate complexes of structural type CpRu(PPh₃)₂SR (1) [R = 2-imidazolyl (a), 1-methylimidazolyl (b), 5-methyl-1,3,5-thiadiazolyl (c) and 5-methyl-4H-1,2,4-triazolyl (d)] are accessible from the reaction of CpRu(PPh₃)₂Cl with the corresponding thiolate anions. Reaction of CpRu(PPh₃)₂Cl with the heterocyclic-thiolate anions in the presence of the bisphosphine ligands affords CpRu(P-P)SR [P-P = bis(diphenylphosphino)methane; dppm (2), bis(diphenylphosphino)ethane; dppe (3)]. If CO gas was bubbled through a THF solution of 1b, the complex CpRu(PPh₃)(CO)S(C₄N₂H₅) (4b) is produced. These ruthenium-heterocyclic thiolate complexes have been characterized by elemental analysis, spectroscopy (IR, ¹H, ³¹P{¹H} NMR and MS) and cyclic voltammetry for some samples. The solid-state structures of 3a and 3b are determined by single-crystal X-ray structure analysis.     

Preparation and characterization of macrocyclic dinickel complexes coligated by monoalkyl- and dialkylcarbamates

The dinuclear nickel(II) complex [Ni₂L(Cl)]⁺ (1), where (L)²⁻ represents a 24-membered binucleating hexamine-dithiophenolate ligand, reacts readily with primary and secondary amines RR′NH in the presence of CO₂ (1 bar) to give dinuclear monoalkyl- and dialkylcarbamate complexes [Ni₂L(O₂CNRR′)]⁺ (R = H, R′ = CH₂Ph (2), R = H, R′ = n-Bu (3), R = H, R′ = n-Oct (4), R = H, R′ = CH₂CH₂OH (5), R = R′ = Et (6), and R = R′ = CH₂CH₂OH (7)). Complexes 2-7 can also be prepared by the reaction of 1 with CO₂(air)/amine. The carbamate complexes are hydrolyzed in methanolic solution to give the known alkylcarbonate complex [Ni₂L(O₂COMe)]⁺ (8). These conversions are less rapid than the transesterification reactions of 8, due to a less electron-demanding carboxyl C(carbamate) atom. All new complexes were either isolated as perchlorate or tetraphenylborate salts and fully characterized by elemental analysis, UV/Vis, and IR spectroscopy. The structures of 2[BPh₄] and 7[BPh₄] have also been determined by X-ray crystallography. They confirm the presence of μ_1,3-bridging alkylcarbamate units in the products.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Diiron and diruthenium aminocarbyne complexes containing pseudohalides: stereochemistry and reactivity

Acetonitrile is easily displaced from [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (R = 2,6-Me₂C₆H₃ (Xyl) (1a); Me (1b)) upon stirring in THF at room temperature in the presence of [NBu₄][SCN]. The resulting complexes trans-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (trans-2a); Me (trans-2b)) are completely isomerised to cis-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (cis-2a); Me (cis-2b)) when heated at reflux temperature. Similarly, the complexes cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCO)(Cp)₂] (M = Fe, R = Me (4a); M = Ru, R = Xyl (4b); M = Ru, R = Me (4c)) and cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(N₃)(Cp)₂] (M = Fe, R = Xyl (5a); M = Fe, R = Me (5b); M = Ru, R = Xyl (5c)) can be obtained by heating at reflux temperature a THF solution of [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (M = Fe, R = Xyl (1a); M = Fe, Me (1b); M = Ru, R = Xyl (1c); M = Ru, R = Me (1d)) in the presence of NaNCO and NaN₃, respectively. The reactions of 5 with MeO₂CCCCO₂Me, HCCCO₂Me and (NC)(H)CC(H)(CN) afford the triazolato complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃C₂(CO₂Me)₂}(Cp)₂] (M = Fe, R = Xyl (6a); M = Fe, R = Me (6b); M = Ru, R = Xyl (6c)), [M₂{μ-CN(Me)(R)}(μ- CO)(CO){N₃C₂(H)(CO₂Me)}(Cp)₂] (M = Fe, R = Me (7a); M = Ru, R = Xyl (7b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃C₂(H)(CN)}(Cp)₂] (8), respectively. The asymmetrically substituted triazolato complexes 7-8 are obtained as mixtures of N(1) and N(2) bonded isomers, whereas 6 exists only in the N(2) form. Methylation of 6-8 results in the formation of the triazole complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(CO₂Me)₂}(Cp)₂][CF₃SO₃] (9), [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃(Me)C₂(H)(CO₂Me)}(Cp)₂][CF₃SO₃] (M = Fe, R = Me (10a); M = Ru, R = Xyl (10b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(H)(CN)}(Cp)₂][CF₃SO₃], 11. The crystal structures of trans-2b, 4b · CH₂Cl₂, 5a, 6b · 0.5CH₂Cl₂ and 8 · CH₂Cl₂ have been determined.     

Synthesis and characterization of ether-derivatized aminophosphines and their application in C-C coupling reactions

Four new bis(phosphino)amine ligands (Ph₂P)₂N-C₆H₃-R, where R = 3,5-OMe (1), 2,5-OMe (2), 2,4-OMe (3) or 3,4-OMe (4), were prepared via aminolysis of the corresponding dimethoxyanilines with 2 equiv. of diphenylphosphine chloride in the presence of triethyl amine. Oxidation of these ligands with aqueous H₂O₂, elemental S₈ or Se powder afforded the corresponding chalcogen oxides 1a-4a, sulfides 1b-4b and selenides 1c-4c in good yields. Reaction of 1-4 with [MCl₂(cod)] (M = Pt, Pd; cod = cycloocta-1,5-diene) in equimolar ratios afforded cis-[MCl₂{(Ph₂P)₂N-C₆H₃-R}] (M = Pt; R = 3,5-OMe 1d, R = 2,5-OMe 2d, R = 2,4-OMe 3d, and R = 3,4-OMe 4d. M = Pd; R = 3,5-OMe 1e, R = 2,5-OMe 2e, R = 2,4-OMe 3e, and R = 3,4-OMe 4e). Similarly, reaction of [Cu(CH₃CN)₄]PF₆ with the 1-4 in 1:2 ratio gave [Cu{(Ph₂P)₂N-C₆H₃-R}₂]PF₆ (R = 3,5-OMe 1f, 2,5-OMe 2f, 2,4-OMe 3f and 3,4-OMe 4f). All new compounds were fully characterized by spectroscopy and elemental analysis and the molecular structures of seven representative compounds were determined by single-crystal X-ray crystallography. In addition, the palladium complexes were investigated as pre-catalysts in C-C coupling reactions.     

Syntheses of di-hydrocarbyl derivatives of carbonyl phosphine complexes of iron

Complexes cis,trans-Fe(CO)₂(PMe₃)₂RR′ (R = CH₃, R′ = Ph (2); R = CH₃, R′ = CHCH₂ (3); R = CHCH₂, R′ = Ph (4); R = R′ = CHCH₂ (5); R = R′ = CH₃ (6)) were prepared by reaction of cis,trans-Fe(CO)₂(PMe₃)₂RCl (1) with organolithium reagents LiR′. All complexes were characterized in solution by IR and ¹H, ³¹P and, in a few cases, ¹³C NMR mono- and bi-dimensional spectroscopies. Complexes 5 and 6 were structurally characterized by X-ray diffractometric methods. In solution complexes 2, 3 and 4 undergo slowly coupling of the σ-hydrocarbyl substituents leading to Fe(CO)₃(PMe₃)₂ and other decomposition products. Complex 6 was very stable in solution in the absence of nucleophiles and in the solid state. Complex 5 transformed through intramolecular coupling of the vinyl groups into Fe(CO)(PMe₃)₂(η⁴-butadiene) (7), which was characterized in solution by IR and NMR spectroscopies.     

Hydrogen-halide versus alkyl-halide oxidative addition in dimethyl platinum(II) complexes: Crystal structure of [PtBr2(bpy)]

Dimethyl platinum(II) complexes [PtMe₂(NN)] {NN = bu₂bpy (4,4′-di-tert-butyl-2,2′-bipyridine) (1a), bpy (2,2′-bipyridine) (1b), phen (1,10-phenanthroline) (1c)} reacted with commercial 3-bromo-1-propanol in the presence of 1,3-propylene oxide to afford cis, trans- [PtBrMe₂{(CH₂)₃OH}(NN)] (NN = bu₂bpy (2a), bpy (2b), phen (2c)). On the other hand, [PtMe₂(NN)] (1a)-(1b) reacted with the trace of HBr in commercial 3-bromo-1-propanol to give [PtBr₂(NN)] (NN = bu₂bpy (3a), bpy (3b)). The reaction pathways were monitored by ¹H NMR at various temperatures. Treatment of 1a-1b with a large excess of 3-bromo-1-propanol at −80 °C gave the corresponding methyl(hydrido)platinum(IV) complexes [PtBr(H)Me₂(NN)] (NN = bu₂bpy (4a), bpy (4b)) via the oxidative addition of dimethyl platinum(II) complexes with HBr. The complexes [PtBr(H)Me₂(NN)] decomposed by reductive elimination of methane above −20 °C for bu₂bpy and from −20 to 0 °C for bpy analogue to give methane and platinum(II) complexes [PtBrMe(NN)] (5a)-(5b) and then decomposed at about 0 °C to yield [PtBr₂(NN)] and methane. When the reactions were performed at a molar ratio of Pt:RX/1:10, the corresponding complexes [PtBrMe(NN)] (5a)-(5b) were also obtained. The crystal structure of the complex 3b shows that platinum adopts square planar geometry with a twofold axis through the platinum atom. The Pt…Pt distance (5.164 Å) is considerably larger than the interplanar spacing (3.400 Å) and there is no platinum-platinum interaction.     

Lewis-base copper(I) formates: Synthesis, reaction chemistry, structural characterization and their use as spin-coating precursors for copper deposition

Consecutive synthesis methodologies for the preparation of a series of copper(I) formates [L_mCuO₂CH] (L = ⁿBu₃P: 4a, m = 1; 4b, m = 2; 5, L = [Ti](CCSiMe₃)₂, m = 1, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and [L_mCuO₂CH·HO₂CR] (L = ⁿBu₃P: 7a, m = 1, R = H; 7b, m = 2, R = H; 7c, m = 2, R = Me; 7d, m = 2, R = CF₃; 7e, m = 2, R = Ph. L = (^cC₆H₁₁)₃P, R = H: 8a, m = 2; 8b, m = 3. L = (CF₃CH₂O)₃P, R = H: 9a, m = 2; 9b, m = 3. L = (CH₃CH₂O)₃P, R = H: 10a, m = 2; 10b, m = 3. L = [Ti](CCSiMe₃)₂; m = 1: 11a, R = H; 11b, R = Ph) is reported using [CuO₂CH] (1) and L (2a, L = ⁿBu₃P; 2b, L (^cC₆H₁₁)₃P; 2c, L = (CF₃CH₂O)₃P; 2d, L = (CH₃CH₂O)₃P; 3, L = [Ti](CCSiMe₃)₂) as key starting materials. Addition of formic acid (6a) or carboxylic acid HO₂CR (6b, R = Me; 6c, R = CF₃; 6d, R = Ph) to the afore itemized copper(I) formates 4 and 5 gave metal-organic or organometallic 7-11. The molecular structures of 8a and 11a in the solid state are reported showing a threefold coordinated copper(I) ion, setup by either two coordinatively-bonded phosphorus atoms and one formate oxygen atom (8a) or two π-bonded alkyne ligands and one oxygen atom (11a). A formic acid molecule is additionally hydrogen-bonded to the CuO₂CH moiety. The use of 7b as suitable precursor for the deposition of copper onto TiN-coated oxidized silicon wafers by the spin-coating process below 300 °C is described. Complex 7b offers an appropriate transformation behavior into metal phase by an elimination-decarboxylation mechanism. The morphology of the copper films strongly depends on the annealing conditions. A closed grain network densified by a post-treatment is obtained (8 °C min⁻¹, N₂/H₂ carrier gas). Hydrogen post-anneal to 420 °C after film deposition gave a copper film showing resistivities from 2.5 to 3.7 μΩ cm. This precursor was also used for gap-filling processes.     

Iminophosphinite pincer palladium complexes: Synthesis and application

Iminophosphinite pincer palladium complexes were synthesized and evaluated as potential catalysts in the Suzuki coupling reactions of phenylboronic acid and various aryl halides. The iminophosphinite ligands were synthesized through condensation reactions between 2-bromo-3-hydroxybenzaldehyde and 2,4,6-trimethylaniline and 2,6-diisopropylaniline, followed by phosphorylation with chlorodiphenylphosphine and chlorodicyclohexylphosphine. Oxidative addition of the pincer ligands to Pd₂(dba)₃ afforded palladium iminophosphinite complexes [(2-(CHNR)-6-(OPR′₂)C₆H₃)PdBr] (R = 2,6-ⁱPr₂C₆H₃, R′ = Ph (2a) or Cy (2b); R = 2,4,6-Me₃C₆H₂, R′ = Ph (2c) or Cy (2d)). Reaction of 2b and silver trifluoroacetate gave the corresponding iminophosphinite palladium trifluoroacetate (3). The solid state structures of 2a, 2d, and 3 were determined by X-ray single crystal diffraction studies.     

Properties of homo- and heteronuclear mixed biscarbene complexes with conjugated bithiophene units

The syntheses and structures of homo- and heteronuclear biscarbene complexes with bithiophene spacers were investigated. The complexes were synthesized by lithiation of bithiophene followed by metallation using combinations of the metal precursors MnMeCp(CO)₃, W(CO)₆, Mo(CO)₆ and Cr(CO)₆, after which the reaction was quenched with triethyloxonium tetrafluoroborate. This classical Fischer method yielded monocarbene complexes, [ML_nC(OEt)C₄H₂S-C₄H₃S], ([ML_n] = Cr(CO)₅1a, W(CO)₅2a or MnMeCp(CO)₂3a), homonuclear biscarbene complexes, [ML_nC(OEt)C₄H₂S-C₄H₂SC(OEt)ML_n], ([ML_n] = Cr(CO)₅1b, W(CO)₅2b or MnMeCp(CO)₂3b) and heteronuclear biscarbene complexes, [ML_nC(OEt)C₄H₂S-C₄H₂SC(OEt)M′L_n] (1d: [ML_n] = Cr(CO)₅ and [M′L_n] = W(CO)₅; 1e: [ML_n] = MnMeCp(CO)₂ and [M′L_n] = Cr(CO)₅; 1f: [ML_n] = Cr(CO)₅ and [M′] = Mo(CO)₅); 2d: [ML_n] = MnMeCp(CO)₂ and [M′L_n] = W(CO)₅; 3c: [ML_n] = MnMeCp(CO)₂ and [M′L_n] = Mo(CO)₅). Electron density calculations with the gaussian03 software package of 1e revealed a polar rod with the negative pole towards the chromium carbene side, whereas the biscarbenes 1d and 1b showed very little polarity. By-products resulting from activation of the carbene moieties in homonuclear biscarbene complexes included (i) ester-type complexes of the form [ML_nC(OEt)C₄H₂S-C₄H₂SC(O)OEt], ([ML_n] = Cr(CO)₅1c or W(CO)₅2c), formed in situ in the reaction of 1b and 2b, (ii) the organic bis-ester compound [EtOC(O)C₄H₂S-C₄H₂SC(O)OEt] 4, where both metal moieties had been substituted by oxygen and (iii) the carbon-carbon coupled dimeric bithienyl compound [C₄H₃S-C₄H₂SC(O)C(O)C₄H₂S-C₄H₃S] 5. By-products obtained from heteronuclear biscarbene reactions contain the former diketo compound (or a derivative) as spacer between two metal carbonyl fragments and have the general formula [ML_nC(OEt)C₄H₂S-C₄H₂SCR-CR′C₄H₂S-C₄H₂SC(OEt)ML_n] (5a: [M] = Cr(CO)₅, R = OH, R′ = OEt; 5b: [M] = W(CO)₅, R = R′ = O; 5c: [M] = Mo(CO)₅, R = R′ = O). Reaction of 1d, 1e and 1f with hex-3-yne resulted in the formation of benzannulated products 6a, 6b and 6c. All novel complexes were fully characterized using various spectroscopic techniques. The crystal structures of 1b, 2a and 5 are reported.     

Bis-chelated-arylazoimidazole-1,10-phenanthroline-osmium(II) complexes. Structure, spectra and electrochemistry

[Os(phen)(RaaiR′)₂](PF₆)₂ [phen = 1,10-phenanthroline, RaaiR′ = 1-alkyl-2-(arylazo)imidazole, p-R-C₆H₄-NN-C₃H₂-NN-1-R′, where R = H (a), Me (b), Cl (c) and R′ = Me (2), Et (3), CH₂Ph (4) have been synthesized from the reaction of cis-trans-cis-[OsBr₂(RaaiR′)₂] with phen in the presence of aqueous AgNO₃ in ethanol. The structure of [Os(phen)(ClaaiEt)₂](PF₆)₂ was confirmed by X-ray diffraction study. Electronic spectra exhibit a strong MLCT band at 490-512 nm along with weak transition at longer wavelength 865-880 nm. Cyclic voltammetry of the complexes shows two metal redox couples, Os(III)/Os(II) at 0.9-1.0 V and Os(IV)/Os(III) at 1.4-1.6 V versus SCE, and three successive ligand reductions. The EHMO calculation using crystallographic parameters of the complex has been compared with analogous Ru and Os complexes. A correlation between electronic properties and MO results is also reported.     

Mixed-ligand tris chelated complexes of Mo(IV) and W(IV): A comparative study

Two hitherto unknown mixed-ligand tris chelated complexes containing 2-aminothiophenolate, [Et₄N]₂[M^IV(NH-(C₆H₄)-S)(mnt)₂] (M = Mo, 1a; W, 2a) and two mixed-ligand tris chelate complex containing N,N-diethyldithiocarbamate, [Et₄N]₂[M^IV(Et₂NS₂)(mnt)₂] (M = Mo, 1b; W, 2b) have been synthesized and characterized structurally. Although these complexes are supposed to be quite similar to the well-known symmetric tris chelate complexes of maleonitriledithiolate (mnt), [Et₄N]₂[M^IV(mnt)₃] (M = Mo, 1c; W, 2c), but display both trigonal prismatic and distorted trigonal prismatic geometry in their crystal structure indicating the possibility of an equilibrium between these two structural possibilities in solution. Unlike extreme stability of 1b, 2b, 1c and 2c, both 1a and 2a are highly unstable in solution. In contrast to one reversible reduction in case of 1b and 2b, 1a and 2a exhibited no possible reduction up to −1.2 V and two sequential oxidation steps which have been further investigated with EPR study. Differences in stability and electrochemical behavior of 1a, 1b, 2a and 2b have been correlated with theoretical calculations at DFT level in comparison with long known 1c and 2c.     

Bis(pyrazolyl) palladium(II), platinum(II) and gold(III) complexes: Syntheses, molecular structures and substitution reactions with l-cysteine

A series of pyrazolyl palladium(II), platinum(II) and gold(III) complexes, [PdCl₂(3,5-R₂bpza)] {R = H (1), R = Me (2), bpza = bis-pyrazolyl acetic acid}, [PtCl₂(3,5-R₂bpza)] {R = H (3a), R = Me (4)}, [AuCl₂(3,5-R₂bpza)]Cl {R = H (5a), R = Me (6a)} and [PdCl₂(3,5-R₂bpzate)] {R = Me (7)} have been synthesised and structurally characterised. Single crystal X-ray crystallography showed that the pyrazolyl ligands exhibit N^N-coordination with the metals. Anticancer activities of six complexes 1-6a were investigated against CHO cells and were found to have low activities. Substitution reactions of selected complexes 1, 2, 3a and 5a with l-cysteine show that the low anticancer activities compounds and that the rate of substitution with sulfur-containing compounds is not the cause of the low anticancer activities.     

Synthesis, reactivities and catalytic carbonylation of rhodium(I) carbonyl complexes containing isomeric acetylpyridine ligands

[Rh(CO)₂Cl]₂ reacts with two mole equivalent of 2-acetylpyridine (a), 3-acetylpyridine (b) and 4-acetylpyridine (c) to afford chelate [Rh(CO)Cl(η²-N∩O)] (1a) and non-chelate [Rh(CO)₂Cl(η¹-N∼O)] (1b, 1c) complexes, where, N∩O = a, N∼O = b, c. Oxidative addition (OA) of 1a-1c with CH₃I and C₂H₅I yields penta coordinate rhodium(III) complexes, [Rh(COR)ClI(η²-N∩O)] {R = -CH₃ (2a); -C₂H₅ (3a)} and [Rh(COR)(CO)ClI(η¹-N∼O)] {R = -CH₃ (2b, 2c); -C₂H₅ (3b, 3c)}. Kinetic study for the reaction of 1a-1c with CH₃I indicates a pseudo-first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester was evaluated at different initial CO pressures 5, 10 and 20 bar at ∼25 °C and higher turn over numbers (TON = 1581-1654) were obtained compared to commercial Monsanto’s species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature = 130 ± 1 °C, pressure = 15-32 bar, rpm = 450, time = 1 h and catalyst: substrate = 1: 1900.     

Triorganotin(IV) complexes of Schiff base derived from 6-amino-2-mercaptobenzothiazole: Synthesis, characterization and X-ray crystal structures

Nine triorganotin(IV) complexes of the type R₃SnL (L = L1 R = Me 1, Ph 2, PhCH₂3; L = L2 R = Me 4, Ph 5, PhCH₂6; L = L2 R = Me 7, Ph 8, PhCH₂9) have been obtained by reaction of new Schiff base HL1, HL2 or HL3 with triorganotin(IV) chloride in the presence of sodium ethoxide. All the complexes 1-9 were characterized by elemental, IR and NMR spectra analyses. Except for complexes 3, 4, 6, 9, the others were also characterized by X-ray crystallography diffraction analyses, which revealed that complexes 1, 2, 5, 7, 8 were four coordinated and displayed a capped tetrahedron.     

Thiol end-capped titanium-copper complexes: Synthesis, solid state structure and electrochemical behavior

The synthesis of acetylene, acyl-thiol and thiol end-capped titanium-copper π-tweezer complexes of the structural type {[Ti](μ-σ,π-CCR)₂}CuSC₆H₄-4-R′ ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; 3: R = SiMe₃, R′ = CCH; 5a: R = SiMe₃, R′ = SC(O)Me; 5b: R = ^tBu, R′ = SC(O)Me), {[Ti](μ-σ,π-CCSiMe₃)₂}CuSC₆H₄-C₆H₄-4-SH (7) and ({[Ti](μ-σ,π-CCR)₂}CuSC₆H₄)₂ (8) is described. Homobimetallic 3, 5a and 5b are accessible via the reaction of {[Ti](μ-σ,π-CCR)₂}CuMe (1a: R = SiMe₃, 1b: R = ^tBu) with stoichiometric amounts of Me(O)CS-1-C₆H₄-4-CCH (2) and C₆H₄-1,4-(SC(O)Me)₂ (4), respectively. Within these reactions the copper-sulfur bond formation is accompanied by the elimination of acetone. If 1a is treated with the dithiol (HS-C₆H₄)₂ (6) in a ratio of 1:1 or 2:1 than dinuclear 7 and tetranuclear 8 are produced upon formation of methane. Both types of reaction allow in a straightforward manner the synthesis of analytically pure samples in high yield. In addition, complex 8 is also formed, when equimolar amounts of 7 are reacted with1a.The solid state structure of 5a is reported. This complex possesses a low-valent CuSC₆H₄-4-SC(O)Me entity with copper(I) in a planar surrounding. All other geometrical features are in agreement with the expected data relevant for Ti-Cu organometallic π-tweezer complexes.Cyclic voltammetric studies were carried out with 3-8. The results are discussed with respect to intramolecular interactions between the various electrochemically active reaction sites.     

Phosphane- and phosphite-silver(I) phenolates: Synthesis, characterization and their use as CVD precursors

The silver(I) salts [AgOR] (3a, R = C₉H₆N; 3b, R = C₆H₄-2-CHO, 3c, R = C₆H₄-2-Cl; 3d, R = C₆H₄-2-CN; 3e, R = C₆H₄-2-NO₂) are accessible by the stoichiometric reaction of [AgNO₃] (1) with HOR (2a, R = C₉H₆N; 2b, R = C₆H₄-2-CHO; 2c, R = C₆H₄-2-Cl; 2d, R = C₆H₄-2-CN; 2e, R = C₆H₄-2-NO₂) in presence of NEt₃. Treatment of 3a-3e with PⁿBu₃ (4), P(OMe)₃ (5a) or P(OCH₂CF₃)₃ (5b) in the ratios of 1:1 and 1:2, respectively, produced complexes [L_mAgOR] (L = PⁿBu₃, m = 1: 6a, R = C₉H₆N; 6b, R = C₆H₄-2-CHO; 6c, R = C₆H₄-2-Cl; 6d, R = C₆H₄-2-CN; 6e, R = C₆H₄-2-NO₂. m = 2: 7a, R = C₉H₄; 7b, R = C₆H₄-2-CHO; 7c, R = C₆H₄-2-Cl; 7d, R = C₆H₄-2-CN; 7e, R = C₆H₄-2-NO₂. L = P(OMe)₃, m = 1: 8a, R = C₆H₄-2-CHO; 8b, R = C₆H₄-2-NO₂. m = 2: 9, R = C₆H₄-2-NO₂. L = P(OCH₂CF₃)₃, m = 1: 10, R = C₆H₄-2-NO₂). Based on TGA, temperature-programmed and in situ molecular beam mass spectrometry metal-organic 7e was applied as CVD precursor in the deposition of silver onto glass substrates. The resulting silver films were characterized by XRD. The SEM image of a film grown from 7e at 350 °C showed a homogeneous surface with grain sizes of 40 nm. The molecular structures of 8b and 10 in the solid state were determined. They are isostructural and are cubane-like structured. Low-temperature ³¹P{¹H} NMR studies showed that the title complexes are dynamic in solution and exchange at room temperature their ligands.     

Stereosensitive formation and interconversion of sulfur-bridged cobalt(III)-mercury(II) polynuclear complexes with d- and/or l-penicillaminates

The reaction of trans(N)-[Co(d-pen)₂]⁻ (pen = penicillaminate) with HgCl₂ or HgBr₂ in the molar ratios of 1:1 gave the sulfur-bridged heterodinuclear complex, [HgX(OH₂){Co(d-pen)₂}] (X = Cl (1a) or Br (1b)). A similar reaction in the ratio of 2:1 produced the trinuclear complex, [Hg{Co(d-pen)₂}₂] (1c). The enantiomers of 1a and 1c, [HgCl(OH₂){Co(l-pen)₂}] (1a′) and [Hg{Co(l-pen)₂}₂] (1c′), were also obtained by using trans(N)-[Co(l-pen)₂]⁻ instead of trans(N)-[Co(d-pen)₂]⁻. Further, the reaction of cis · cis · cis-[Co(d-pen)(l-pen)]⁻ with HgCl₂ in the molar ratio of 1:1 resulted in the formation of [HgCl(OH₂){Co(d-pen)(l-pen)}] (2a). During the formations of the above six complexes, 1a, 1b, 1c, 1a′, 1c′, and 2a, the octahedral Co(III) units retain their configurations. On the other hand, the reaction of cis · cis · cis-[Co(d-pen)(l-pen)]⁻ with HgCl₂ in the molar ratio of 2:1 gave not [Hg{Co(d-pen)(l-pen}₂] but [Hg{Co(d-pen)₂}{Co(l-pen)₂}] (2c), accompanied by the ligand-exchange on the terminal Co(III) units. The X-ray crystal structural analyses show that the central Hg(II) atom in 1c takes a considerably distorted tetrahedral geometry, whereas that in 2c is of an ideal tetrahedron. The interconversion between the complexes is also examined. The electronic absorption, CD, and NMR spectral behavior of the complexes is discussed in relation to the crystal structures of 1c and 2c.