Synthesis and characterisation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes [Ti(IV), Zr(IV), Hf(IV), La(III), Ce(III), Yb(III), Sn(II) and Fe(II)]

The preparation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes is described. These are of formula [M{η⁵-C₅H₄(BX)}Cl₃] [M = Ti and X = CAT (2a), CAT^t (2b) or CAT^tt (2c); X = CAT^tt and M = Zr (4a) or Hf (4b)], [M{η⁵-C₅H₄(BX)}₂Cl₂] [M = Zr, X = CAT (3a) or CAT^t (3c); or M = Hf, X = CAT (3b) or CAT^t (3d)], [M{(μ-η⁵-C₅H₃BCAT)₂ SiMe₂}Cl₂] [M = Zr (5a) or Hf (5b)], [M{η⁵-C₅H₃(BCAT)₂}Cl₃] [M = Zr (6a) or Hf (6b)], [M{η⁵-C₅H₄BCAT}₃(THF)] [M = La (7a), Ce (7b) or Yb (7c)], [Sn{η⁵-C₅ H₄(BCAT^t)}Cl](8) and [Fe{η⁵-C₅H₄(BCAT^t)}₂] (9). The abbreviations refer to BO₂C₆H₄-1,2 (BCAT) and the 4-Bu^t (BCAT^t) and the (BCAT^tt) analogues. The compounds 2a-9 have been characterised by microanalysis, multinuclear NMR and mass spectra. The single crystal X-ray structure of the lanthanum compound 7a is presented.     

Synthesis, reactivities and catalytic carbonylation of rhodium(I) carbonyl complexes containing isomeric acetylpyridine ligands

[Rh(CO)₂Cl]₂ reacts with two mole equivalent of 2-acetylpyridine (a), 3-acetylpyridine (b) and 4-acetylpyridine (c) to afford chelate [Rh(CO)Cl(η²-N∩O)] (1a) and non-chelate [Rh(CO)₂Cl(η¹-N∼O)] (1b, 1c) complexes, where, N∩O = a, N∼O = b, c. Oxidative addition (OA) of 1a-1c with CH₃I and C₂H₅I yields penta coordinate rhodium(III) complexes, [Rh(COR)ClI(η²-N∩O)] {R = -CH₃ (2a); -C₂H₅ (3a)} and [Rh(COR)(CO)ClI(η¹-N∼O)] {R = -CH₃ (2b, 2c); -C₂H₅ (3b, 3c)}. Kinetic study for the reaction of 1a-1c with CH₃I indicates a pseudo-first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester was evaluated at different initial CO pressures 5, 10 and 20 bar at ∼25 °C and higher turn over numbers (TON = 1581-1654) were obtained compared to commercial Monsanto’s species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature = 130 ± 1 °C, pressure = 15-32 bar, rpm = 450, time = 1 h and catalyst: substrate = 1: 1900.     

Secondary ligand-metal interactions in rhodium(III) and iridium(III) phosphoramidite complexes

The synthesis, characterization, and application in asymmetric catalytic cyclopropanation of Rh(III) and Ir(III) complexes containing (S_a,R_C,R_C)-O,O′-[1,1′-binaphthyl-2,2′-diyl]-N,N′-bis[1-phenyl-ethyl]phosphoramidite (1) are reported. The X-ray structures of the half-sandwich complexes [MCl₂(C₅Me₅)(1,κP)] (M = Rh, 2a; M = Ir, 2b) show that the metal-phosphoramidite bond is significantly shorter in the Ir(III) analog. Chloride abstraction from 2a (with CF₃SO₃SiMe₃ or with CF₃SO₃Me) and from 2b (with AgSbF₆) gives the cationic species [MCl(C₅Me₅)(1,2-η-1,κP)]⁺ (M = Rh, 3a; M = Ir, 3b), which display a secondary interaction between the metal and a dangling phenethyl group (NCH(CH₃)Ph) of the phosphoramidite ligand, as indicated by NMR spectroscopic studies. Complexes 3a and 3b slowly decompose in solution. In the case of 3b, the binuclear species [Ir₂Cl₃(C₅Me₅)₂]⁺ is slowly formed, as indicated by an X-ray study. Preliminary catalytic tests showed that 3a cyclopropanates styrene with moderate yield (35%) and diastereoselectivity (70:30 trans:cis ratio) and with 32% ee (for the trans isomer).     

Synthesis and electrochemical aspects of group 14 iron complexes of the type (η-C5H5)Fe(L)2ER3, L2 = (CO)2, (Ph2P)2CH2; E = C, Si, Ge, Sn

The dicarbonyl and diphosphine complexes of the type (η⁵-C₅H₅)Fe(L)₂ER₃ (L₂ = (CO)₂ (a), (Ph₂P)₂CH₂ (b); ER₃ = CH₃ (1a/b); SiMe₃ (2a/b), GeMe₃ (3a/b), SnMe₃ (4a/b)) were synthesized and studied electrochemically. Cyclic voltammetric studies on the dicarbonyl complexes 1a-4a revealed one electron irreversible oxidation processes whereas the same processes for the chelating phosphine series 1b-4b were reversible. The E_ox values found for the series 1a-4a were in the narrow range 1.3-1.5 V and in the order Si > Sn ≈ Ge > C; those for 1b-4b (involving replacement of the excellent retrodative π-accepting CO ligands by the superior σ-donor and poorer π-accepting phosphines) have much lower oxidation potentials in the sequence Sn > Si ≈ Ge > C. This latter oxidation potential pattern relates directly to the solution ³¹P NMR chemical shift data illustrating that stronger donation lowers the E_ox for the complexes; however, simple understanding of the trend must await the results of a current DFT analysis of the systems.     

Photolysis of arene chromium tricarbonyl complexes in presence of amine-boranes: Observation of σ-borane complexes in solution

Activation of the B-H σ-bond of amine-boranes on the chromium(0) center of arene chromium tricarbonyl complexes (η⁶-arene)Cr(CO)₃ (arene = fluorobenzene, 1a; benzene, 1b and mesitylene, 1c) has been studied. Photolysis of 1b in presence of ammonia-borane (H₃N·BH₃, AB) and tert-butylamine-borane (^tBuH₂N·BH₃, TBAB) resulted in H₂ evolution and precipitation of a BNH_x polymer. On the other hand, photolysis in the presence of trimethylamine-borane (Me₃N·BH₃, TMAB) resulted in the formation of a σ-borane complex (2) along with Cr(CO)₅(η¹-HBH₂·NMe₃) (3). The σ-borane complexes (η⁶-arene)Cr(CO)₂(η¹-HBH₂·NMe₃) (arene = fluorobenzene, 2a; benzene, 2b and mesitylene, 2c) were characterized in solution by ¹H, ¹¹B, and ¹³C NMR spectroscopy. Electron withdrawing substituents on the arene ring provide the more stable σ-borane moiety in this series of complexes.     

Diiron and diruthenium aminocarbyne complexes containing pseudohalides: stereochemistry and reactivity

Acetonitrile is easily displaced from [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (R = 2,6-Me₂C₆H₃ (Xyl) (1a); Me (1b)) upon stirring in THF at room temperature in the presence of [NBu₄][SCN]. The resulting complexes trans-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (trans-2a); Me (trans-2b)) are completely isomerised to cis-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (cis-2a); Me (cis-2b)) when heated at reflux temperature. Similarly, the complexes cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCO)(Cp)₂] (M = Fe, R = Me (4a); M = Ru, R = Xyl (4b); M = Ru, R = Me (4c)) and cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(N₃)(Cp)₂] (M = Fe, R = Xyl (5a); M = Fe, R = Me (5b); M = Ru, R = Xyl (5c)) can be obtained by heating at reflux temperature a THF solution of [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (M = Fe, R = Xyl (1a); M = Fe, Me (1b); M = Ru, R = Xyl (1c); M = Ru, R = Me (1d)) in the presence of NaNCO and NaN₃, respectively. The reactions of 5 with MeO₂CCCCO₂Me, HCCCO₂Me and (NC)(H)CC(H)(CN) afford the triazolato complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃C₂(CO₂Me)₂}(Cp)₂] (M = Fe, R = Xyl (6a); M = Fe, R = Me (6b); M = Ru, R = Xyl (6c)), [M₂{μ-CN(Me)(R)}(μ- CO)(CO){N₃C₂(H)(CO₂Me)}(Cp)₂] (M = Fe, R = Me (7a); M = Ru, R = Xyl (7b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃C₂(H)(CN)}(Cp)₂] (8), respectively. The asymmetrically substituted triazolato complexes 7-8 are obtained as mixtures of N(1) and N(2) bonded isomers, whereas 6 exists only in the N(2) form. Methylation of 6-8 results in the formation of the triazole complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(CO₂Me)₂}(Cp)₂][CF₃SO₃] (9), [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃(Me)C₂(H)(CO₂Me)}(Cp)₂][CF₃SO₃] (M = Fe, R = Me (10a); M = Ru, R = Xyl (10b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(H)(CN)}(Cp)₂][CF₃SO₃], 11. The crystal structures of trans-2b, 4b · CH₂Cl₂, 5a, 6b · 0.5CH₂Cl₂ and 8 · CH₂Cl₂ have been determined.     

Influence of the phosphine arrangement on the reactivity of palladium(II) and platinum(II) polyphosphine complexes with copper(I) chloride

The distorted square-planar complexes [Pd(PNHP)Cl]Cl (1) (PNHP = bis[2-(diphenylphosphino)ethyl]amine), [M(P₃)Cl]Cl [P₃ = bis[2-(diphenylphosphino)ethyl]phenylphosphine; M = Pd (2), Pt (3)] and [Pt(NP₃)Cl]Cl (5) (NP₃ = tris[2-(diphenylphosphino)ethyl]amine), coexisting in the later case with a square-pyramidal arrangement, react with one equivalent of CuCl to give the mononuclear heteroionic systems [M(L)Cl](CuCl₂) [L = PNHP, M = Pd (1a); L = P₃, M = Pd (2a), Pt (3a); L = NP₃, M = Pt (5a)]. The crystal structure of 3a confirms that Pt(II) retains the distorted square-planar geometry of 3 in the cation with P₃ acting as tridentate chelating ligand, the central P atom being trans to one chloride. The counter anion is a nearly linear dichlorocuprate(I) ion. However, the five-coordinate complexes [Pd(NP₃)Cl]Cl (4), [M(PP₃)Cl]Cl (M = Pd (6), Pt (7); PP₃ = tris[2-(diphenylphosphino)ethyl] phosphine) containing three fused five-membered chelate rings undergo a ring-opening by interaction with one (4, 6, 7) and two (6, 7) equivalents of CuCl with formation of neutral MCu(L)Cl₃ [L = NP₃, M = Pd (4a); L = PP₃, M = Pd (6a), Pt (7a)] and ionic [MCu(PP₃)Cl₂](CuCl₂) [M = Pd (6b), Pt (7b)] compounds, respectively. The heteronuclear systems were shown by ³¹P NMR to have structures where the phosphines are acting as tridentate chelating ligands to M(II) and monodentate bridging to Cu(I). Further additions of CuCl to the neutral species 6a and 7a in a 1:1 ratio resulted in the achievement of the ionic complexes 6b and 7b with ions as counter anions. It was demonstrated that the formation of heterobimetallic or just mononuclear mixed salt complexes was clearly influenced by the polyphosphine arrangement with the tripodal ligands giving the former compounds. However, complexes [M(NP₃)Cl]Cl constitute one exception and the type of reaction undergone versus CuCl is a function of the d⁸ metal centre.     

A new series of iodocarbonyl ruthenium (II) complexes with unsymmetrical phosphine-phosphine sulfide ligands of the type Ph2P(CH2)nP(S)Ph2, n = 1-4: Isolation and structural investigation

Hexa-coordinated chelate complex cis-[Ru(CO)₂I₂(P∩S)] (1a) {P∩S = η²-(P,S)-coordinated} and penta-coordinated non-chelate complexes cis-[Ru(CO)₂I₂(P∼S)] (1b-d) {P∼S = η¹-(P)-coordinated} are produced by the reaction of polymeric [Ru(CO)₂I₂]_n with equimolar quantity of the ligands Ph₂P(CH₂)_nP(S)Ph₂ {n = 1(a), 2(b), 3(c), 4(d)} in dichloromethane at room temperature. The bidentate nature of the ligand a in the complex 1a leads to the formation of five-membered chelate ring which confers extra stability to the complex. On the other hand, 1:2 (Ru:L) molar ratio reaction affords the hexa-coordinated non-chelate complexes cis,cis,trans-[Ru(CO)₂I₂(P∼S)₂] (2a-d) irrespective of the ligands. All the complexes show two equally intense terminal ν(CO) bands in the range 2028-2103 cm⁻¹. The ν(PS) band of complex 1a occurs 23 cm⁻¹ lower region compared to the corresponding free ligand suggesting chelation via metal-sulfur bond formation. X-ray crystallography reveals that the Ru(II) atom occupies the center of a slightly distorted octahedral geometry. The complexes have also been characterized by elemental analysis, ¹H, ¹³C and ³¹P NMR spectroscopy.     

Mixed-ligand tris chelated complexes of Mo(IV) and W(IV): A comparative study

Two hitherto unknown mixed-ligand tris chelated complexes containing 2-aminothiophenolate, [Et₄N]₂[M^IV(NH-(C₆H₄)-S)(mnt)₂] (M = Mo, 1a; W, 2a) and two mixed-ligand tris chelate complex containing N,N-diethyldithiocarbamate, [Et₄N]₂[M^IV(Et₂NS₂)(mnt)₂] (M = Mo, 1b; W, 2b) have been synthesized and characterized structurally. Although these complexes are supposed to be quite similar to the well-known symmetric tris chelate complexes of maleonitriledithiolate (mnt), [Et₄N]₂[M^IV(mnt)₃] (M = Mo, 1c; W, 2c), but display both trigonal prismatic and distorted trigonal prismatic geometry in their crystal structure indicating the possibility of an equilibrium between these two structural possibilities in solution. Unlike extreme stability of 1b, 2b, 1c and 2c, both 1a and 2a are highly unstable in solution. In contrast to one reversible reduction in case of 1b and 2b, 1a and 2a exhibited no possible reduction up to −1.2 V and two sequential oxidation steps which have been further investigated with EPR study. Differences in stability and electrochemical behavior of 1a, 1b, 2a and 2b have been correlated with theoretical calculations at DFT level in comparison with long known 1c and 2c.     

Properties of homo- and heteronuclear mixed biscarbene complexes with conjugated bithiophene units

The syntheses and structures of homo- and heteronuclear biscarbene complexes with bithiophene spacers were investigated. The complexes were synthesized by lithiation of bithiophene followed by metallation using combinations of the metal precursors MnMeCp(CO)₃, W(CO)₆, Mo(CO)₆ and Cr(CO)₆, after which the reaction was quenched with triethyloxonium tetrafluoroborate. This classical Fischer method yielded monocarbene complexes, [ML_nC(OEt)C₄H₂S-C₄H₃S], ([ML_n] = Cr(CO)₅1a, W(CO)₅2a or MnMeCp(CO)₂3a), homonuclear biscarbene complexes, [ML_nC(OEt)C₄H₂S-C₄H₂SC(OEt)ML_n], ([ML_n] = Cr(CO)₅1b, W(CO)₅2b or MnMeCp(CO)₂3b) and heteronuclear biscarbene complexes, [ML_nC(OEt)C₄H₂S-C₄H₂SC(OEt)M′L_n] (1d: [ML_n] = Cr(CO)₅ and [M′L_n] = W(CO)₅; 1e: [ML_n] = MnMeCp(CO)₂ and [M′L_n] = Cr(CO)₅; 1f: [ML_n] = Cr(CO)₅ and [M′] = Mo(CO)₅); 2d: [ML_n] = MnMeCp(CO)₂ and [M′L_n] = W(CO)₅; 3c: [ML_n] = MnMeCp(CO)₂ and [M′L_n] = Mo(CO)₅). Electron density calculations with the gaussian03 software package of 1e revealed a polar rod with the negative pole towards the chromium carbene side, whereas the biscarbenes 1d and 1b showed very little polarity. By-products resulting from activation of the carbene moieties in homonuclear biscarbene complexes included (i) ester-type complexes of the form [ML_nC(OEt)C₄H₂S-C₄H₂SC(O)OEt], ([ML_n] = Cr(CO)₅1c or W(CO)₅2c), formed in situ in the reaction of 1b and 2b, (ii) the organic bis-ester compound [EtOC(O)C₄H₂S-C₄H₂SC(O)OEt] 4, where both metal moieties had been substituted by oxygen and (iii) the carbon-carbon coupled dimeric bithienyl compound [C₄H₃S-C₄H₂SC(O)C(O)C₄H₂S-C₄H₃S] 5. By-products obtained from heteronuclear biscarbene reactions contain the former diketo compound (or a derivative) as spacer between two metal carbonyl fragments and have the general formula [ML_nC(OEt)C₄H₂S-C₄H₂SCR-CR′C₄H₂S-C₄H₂SC(OEt)ML_n] (5a: [M] = Cr(CO)₅, R = OH, R′ = OEt; 5b: [M] = W(CO)₅, R = R′ = O; 5c: [M] = Mo(CO)₅, R = R′ = O). Reaction of 1d, 1e and 1f with hex-3-yne resulted in the formation of benzannulated products 6a, 6b and 6c. All novel complexes were fully characterized using various spectroscopic techniques. The crystal structures of 1b, 2a and 5 are reported.     

Ruthenium(II) carbonyl chloride complexes containing pyridine-functionalised bidentate N-heterocyclic carbenes: Synthesis, structures, and impact of the carbene ligands on catalytic activities

A series of new ruthenium(II) carbonyl chloride complexes with pyridine-functionalised N-heterocyclic carbenes [Ru(Py-NHC)(CO)₂Cl₂], [Py-NHC = 3-methyl-1-(2-pyridyl)imidazol-2-ylidene, 1 (1a and 1b); 3-methyl-1-(2-picoyl)imidazol-2-ylidene, 2 (2a and 2b); 3-methyl-1-(2-pyridyl)benzimidazolin-2-ylidene, 3 (3b); 3-methyl-1-(2-picoyl)benzimidazolin-2-ylidene, 4 (4a and 4b); 1-methyl-4-(2-pyridyl)-1,2,4-triazoline-5-ylidene, 5 (5a and 5b)] have been prepared by transmetallation from the corresponding silver carbene complexes and characterized by NMR, IR spectroscopy and elemental analysis. In these complexes with bidentate Py-NHC ligands, one CO ligand is trans to the Py ligand. In 1a, 2a, 4a, and 5a, the NHC ligand is trans to the other CO ligand, thus leaving the two Cl⁻ ligands trans to each other. In 1b, 2b, 3b, 4b, and 5b, the NHC ligands are trans to one Cl⁻ ligand, and the two Cl⁻ ligands are cis to each other. The structures for 1b, 2b, 3b and 4b have been determined by single-crystal X-ray diffraction. These complexes are efficient catalysts in the transfer hydrogenation of acetophenone and their catalytic activities are found to be influenced by electronic effect of the N-heterocyclic carbene ligands.     

Coupling of cationic olefin complexes of platinum(II) with potential ambident nucleophiles

The reactivity of [PtCl(η²-CH₂CHR)(tmeda)]⁺ (R = H, 1a, or Me, 1b; tmeda = N,N,N′,N′-tetramethyl-1,2-diaminoethane) towards some ambident nucleophiles like anilines and phenolate anion has been tested. The reaction of 1a with N-methylaniline gives immediately N-addition to the coordinated ethene (3a), but, in the presence of an inorganic carbonate, a partial rearrangement, with the para carbon of the phenyl ring taking the place of nitrogen, is observed (4a and 5a). Reaction with a tertiary aromatic amine, such as N,N-dimethylaniline, leads exclusively to the C-coupled species. The phenolate anion acts initially as an oxygen donor, however the resulting species (6a), in contact with free phenol, rearranges to C-bonded species (7a). For free phenol/6a ratios ? 5 the rearranged product has an isomeric ortho/para ratio of ≈3. For lower free phenol/6a ratios (? 1) oligomeric complexes, in which two or three platinum ethanide moieties are bound to the same phenol ring, are also formed. In the case of 1b, the above described reactivity has to compete with the base-induced deprotonation of propene, leading to formation of the allyl-bridged platinum dimer [{PtCl(tmeda)}(μ-η¹:η³-CHCHCH₂){Pt(tmeda)}]⁺. The X-ray crystal structure of 1b has also been determined; the structural parameters are very similar to those previously reported for 1a. DFT calculations have shown a similar activation of the two complexes towards nucleophilic addition at the coordinated olefin, although in 1b the electrophilic character of the olefin is masked by the Brønsted acidity of the propene methyl protons.     

[S2], [S3], and [N3] coordination modes of hydrotris(thioxotriazolyl)borato. Zinc, nickel, cobalt, and bismuth complexes

The ligand hydrotris(1,4-dihydro-3-methyl-4-phenyl-5-thioxo-1,2,4-triazolyl)borato (Tr^Ph,Me) was synthetized as natrium salt and the complexes [Zn(Tr^Ph,Me)₂] · 7.5H₂O · 1.5CH₃CN (2a), [Zn(Tr^Ph,Me)₂] · 8DMF (2b), [Co(Tr^Ph,Me)₂] · 8DMF (3a), [Ni(Tr^Ph,Me)₂] · H₂O · 6DMSO (4a), [Bi(Tr^Ph,Me)₂]NO₃ (5), have been isolated and structurally characterized by X-ray diffraction. In the zinc derivatives the ligand adopts different denticity and coordination modes, η² and [S₂] for 2a and η³ and [N₃] for 2b, depending on the crystallization solvent, giving rise to tetrahedral and octahedral geometry, respectively. In the octahedral cobalt and nickel complexes the ligand is η³ and [N₃] coordinated whereas in the bismuth complex the η³ and [S₃] coordination is exhibited.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Synthesis, characterization and electrochemistry of bis(3-aryl-6,6-dimethylcyclohexadienyl)ruthenium complexes

Five bis(3-aryl-6,6-dimethylcyclohexadienyl)ruthenium complexes (4a-4e) are prepared by reactions between di-μ-chlorodichlorobis[(1-3η:6-8η)-2,7-dimethyl-octadienyl]diruthenium and the corresponding dienes. The larger aryl substituents increase the barrier to rotation in 4a-4e relative to bis(3-methyl-6,6-cyclohexadienyl)ruthenium (5b). The activation parameters were determined by line-shape analysis for the exchange process in 4a: ΔG^† (183 K), 8.0 ± 0.2 kcal/mol; ΔH^†, 10.3 kcal/mol; and ΔS^†, 13 cal/mol/K. The electronic effect of the aryl substituents on the cyclohexadienyl ligand on the oxidation potential of the complex are compared to the effect of methyl substituents.     

Lewis-base copper(I) formates: Synthesis, reaction chemistry, structural characterization and their use as spin-coating precursors for copper deposition

Consecutive synthesis methodologies for the preparation of a series of copper(I) formates [L_mCuO₂CH] (L = ⁿBu₃P: 4a, m = 1; 4b, m = 2; 5, L = [Ti](CCSiMe₃)₂, m = 1, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and [L_mCuO₂CH·HO₂CR] (L = ⁿBu₃P: 7a, m = 1, R = H; 7b, m = 2, R = H; 7c, m = 2, R = Me; 7d, m = 2, R = CF₃; 7e, m = 2, R = Ph. L = (^cC₆H₁₁)₃P, R = H: 8a, m = 2; 8b, m = 3. L = (CF₃CH₂O)₃P, R = H: 9a, m = 2; 9b, m = 3. L = (CH₃CH₂O)₃P, R = H: 10a, m = 2; 10b, m = 3. L = [Ti](CCSiMe₃)₂; m = 1: 11a, R = H; 11b, R = Ph) is reported using [CuO₂CH] (1) and L (2a, L = ⁿBu₃P; 2b, L (^cC₆H₁₁)₃P; 2c, L = (CF₃CH₂O)₃P; 2d, L = (CH₃CH₂O)₃P; 3, L = [Ti](CCSiMe₃)₂) as key starting materials. Addition of formic acid (6a) or carboxylic acid HO₂CR (6b, R = Me; 6c, R = CF₃; 6d, R = Ph) to the afore itemized copper(I) formates 4 and 5 gave metal-organic or organometallic 7-11. The molecular structures of 8a and 11a in the solid state are reported showing a threefold coordinated copper(I) ion, setup by either two coordinatively-bonded phosphorus atoms and one formate oxygen atom (8a) or two π-bonded alkyne ligands and one oxygen atom (11a). A formic acid molecule is additionally hydrogen-bonded to the CuO₂CH moiety. The use of 7b as suitable precursor for the deposition of copper onto TiN-coated oxidized silicon wafers by the spin-coating process below 300 °C is described. Complex 7b offers an appropriate transformation behavior into metal phase by an elimination-decarboxylation mechanism. The morphology of the copper films strongly depends on the annealing conditions. A closed grain network densified by a post-treatment is obtained (8 °C min⁻¹, N₂/H₂ carrier gas). Hydrogen post-anneal to 420 °C after film deposition gave a copper film showing resistivities from 2.5 to 3.7 μΩ cm. This precursor was also used for gap-filling processes.     

Synthesis and characterization of amine complexes of the cyclopentadienyliron dicarbonyl complex cation, [Cp(CO)2Fe]

The organometallic Lewis acid, [CpFe(CO)₂]⁺ (Cp = η⁵-C₅H₅) reacts with excess dry diethyl ether at low temperatures to form the labile complex [CpFe(CO)₂(Et₂O)]⁺[BF₄]⁻ (1) which is stable at low temperatures and has been fully characterized. Complex 1 in turn reacts with 1-aminoalkanes and α,ω-diaminoalkanes to form new complexes of the type [CpFe(CO)₂NH₂(CH₂)_nCH₃]BF₄ (n = 2-6) (2) and [{CpFe(CO)₂}₂μ-(NH₂(CH₂)_nNH₂)](BF₄)₂ (n = 2-4) (3), respectively. These complexes have been fully characterized and the mass spectral patterns of complexes 2 are reported. The structures of compounds 2a (n = 2) and 2b (n = 3) have been confirmed by single crystal X-ray crystallography. The single crystal X-ray diffraction data show that complex 2a, [CpFe(CO)₂NH₂(CH₂)₂CH₃]BF₄, crystallizes in a triclinic space group while 2b, [CpFe(CO)₂NH₂(CH₂)₃CH₃]BF₄, crystallizes in an orthorhombic Pca2₁ space group with two crystallographically independent molecular cations in the asymmetric unit. Furthermore, the reaction of 1 with 1-alkenes gives the η²-alkene complexes in high yield.     

One-pot syntheses of alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III) bearing p-cymene or pentamethylcyclopentadienyl groups

Reaction of [(p-cymene)RuCl₂(PPh₃)] (1) or [Cp^∗MCl₂(PPh₃)] (Cp^∗ = C₅Me₅) (3a: M = Rh; 4a: M = Ir) with 1-alkynes and PPh₃ were carried out in the presence of KPF₆, generating the corresponding alkenyl-phosphonio complexes, [(p-cymene)RuCl(PPh₃){CHCR(PPh₃)}](PF₆) (2a: R = Ph; 2b: R = p-tolyl) or [Cp^∗MCl(PPh₃){CHCPh(PPh₃)}](PF₆) (5: M = Rh; 6: M = Ir). Similar reactions of complexes [Cp^∗RhCl₂(L¹)] (3a: L¹ = PPh₃; 3c: L¹ = P(OMe)₃) with L² (L² = PPh₃, PMePh₂, P(OMe)₃) gave [Cp^∗RhCl(L¹)(L²)](PF₆) (7bb: L¹ = L² = PMePh₂; 7ca: L¹ = P(OMe)₃, L² = PPh₃; 7cc: L¹ = L² = P(OMe)₃). Alkenyl-phosphonio complex 5 was treated with P(OMe)₃ or 2,6-xylyl isocyanide, affording [Cp^∗RhCl(L){CHCPh(PPh₃)}](PF₆) (8a: L = P(OMe)₃; 8b: L = 2,6-xylNC). X-ray structural analyses of 2a, 6 and 8a revealed that the phosphonium moiety bonded to the C_β atom of the alkenyl group are E configuration.     

Synthesis and reactivity with amines of new diiron alkynyl methoxy carbene complexes

The new diiron alkynyl methoxy carbene complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CCR′}(Cp)₂]⁺ (R = 2,6-Me₂C₆H₃ (Xyl), R′ = Tol, 3a; R = Xyl, R′ = Ph, 3b; R = Xyl, R′=Buⁿ, 3c; R = Xyl, R′=SiMe₃, 3d; R = Me, R′ = Tol, 3e; R = Me, R′ = Ph, 3f) are obtained in two steps by addition of R′CCLi (R′ = Tol, Ph, Buⁿ, SiMe₃) to the carbonyl aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂]⁺ (R = Xyl, 1a; Me, 1b), followed by methylation of the resulting alkynyl acyl compounds [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(O)CCR′}(Cp)₂] (R = Xyl, R′ = Tol, 2a; R = Xyl, R′ = Ph, 2b; R = Xyl, R′ = Buⁿ, 2c; R = Xyl, R′ = SiMe₃, 2d; R = Me, R′ = Tol, 2e; R = Me, R′ = Ph, 2f). Complexes 3 react with secondary amines (i.e., Me₂NH, C₅H₁₀NH) to give the 4-amino-1-metalla-1,3-dienes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CHC(R′)(NMe₂)}(Cp)₂]⁺ (R = Xyl, R′ = Tol, 4a; R = Xyl, R′ = Ph, 4b; R = Me, R′ = Ph, 4c) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(Tol)(NC₅H₁₀)}(Cp)₂]⁺, 5. The addition occurs stereo-selectively affording only the E-configured products. Analogously, addition of primary amines R′NH₂ (R′ = Ph, Et, Prⁱ) affords the 4-(NH-amino)-1-metalla-1,3-diene complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(R)(NHR′)}(Cp)₂]⁺ (R = Ph, 6a; Et, 6b; Prⁱ, 6c). In the case of 6a, only the E isomer is formed, whereas a mixture of the E and Z isomers is present in the case of 6b,c, with prevalence of the latter. Moreover, the two isomeric forms exist under dynamic equilibrium conditions, as shown by VT NMR studies. Complexes 6 are deprotonated by strong bases (e.g., NaH) resulting in the formation of the neutral vinyl imine complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(NR)(Tol)}(Cp)₂] (R = Ph, 7a; Et, 7b; Prⁱ, 7c); the reaction can be reverted by addition of strong acids. X-ray crystal structures have been determined for 3a[CF₃SO₃] · Et₂O, 4c[CF₃SO₃], 6a[BF₄] · CH₂Cl₂, 6c[CF₃SO₃] · 0.5Et₂O and 7a · CH₂Cl₂.     

Synthesis, structures and ligating properties of 2,6-bis(phosphino)thiophenol derivatives

New t-butyl-aryl thioethers where the aryl group is 2,6-bis(phosphino)phenyl have been synthesized. The syntheses were completed via sequential ortho-lithiations of t-butylphenylsulfide, followed by chlorophosphine (ClPR₂) quenches; symmetric (2,6-bis(diphenylphosphino)phenyl, (4a)) and unsymmetric (2-diisopropylphosphino-6-diphenylphosphino)phenyl, (4b) aryl groups were obtained. Treatment of 4a with Li or Na naphthalenide yielded 2,6-bis(diphenylphosphino)thiophenol 5. Reactions of 4a or 5 with NiCl₂ · 6H₂O yielded nickel bis(phosphinothiophenolate) 6. Compounds 4a,b, 5 and 6 were characterized by ¹H and ³¹P NMR, and by mass-spectrometry. In addition, 4a, 5 and 6 were characterized by single crystal X-ray diffraction methods.