Synthesis and properties of new trinuclear Mo(II) complexes containing imidazole and benzimidazole ferrocene units

The reaction of FcCOCl (Fc = (C₅H₅)Fe(C₅H₄)) with benzimidazole or imidazole in 1:1 ratio gives the ferrocenyl derivatives FcCO(benzim) (L1) or FcCO(im) (L2), respectively. Two molecules of L1 or L2 can replace two nitrile ligands in [Mo(η³-C₃H₅)(CO)₂(CH₃CN)₂Br] or [Mo(η³- C₅H₅O)(CO)₂(CH₃CN)₂Br] leading to the new trinuclear complexes [Mo(η³-C₃H₅)(CO)₂(L)₂Br] (C1 for L = L1; C3 for L = L2) and [Mo(η³-C₅H₅O)(CO)₂(L)₂Br] (C2 for L = L1; C4 for L = L2) with L1 and L2 acting as N-monodentade ligands. L1, L2 and C2 were characterized by X-ray diffraction studies. [Mo(η³-C₅H₅O)(CO)₂(L1)₂Br] was shown to be a trinuclear species, with the two L1 molecules occupying one equatorial and one axial position in the coordination sphere of Mo(II). Cyclic voltammetric studies were performed for the two ligands L1 and L2, as well as for their molybdenum complexes, and kinetic and thermodynamic data for the corresponding redox processes obtained. In agreement with the nature of the frontier orbitals obtained from DFT calculations, L1 and L2 exhibit one oxidation process at the Fe(II) center, while C1, C3, and C4 display another oxidation wave at lower potentials, associated with the oxidation of Mo(II).     

Construction of carbon chains on ruthenium and osmium carbonyl clusters

We have used the elimination of AuX(PR₃) (X = halide, R = Ph, tol) that occurs in reactions of alkynylgold(I)-phosphine complexes with M₃(μ-H)₃ (μ₃-CBr) (CO)₉ (M = Ru, Os) to prepare the complexes M₃(μ-H)₃(μ₃-CCCR)(CO)₉ [M = Ru, R = Ph 2, CCSiMe₃3, Fc 4, CCFc 6-Ru, CC[Ru(PPh₃)₂Cp] 8; M = Os, R = CCFc 6-Os, CCCCFc 7], Fc′{(μ₃-CCC)Ru₃(μ-H)₃(CO)₉}₂5, and bis-cluster-capped carbon chain complexes {M₃(μ-H)₃(CO)₉}₂{μ₃:μ₃-C(CC)_nC} (M = Ru, n = 2 9, 3 10-Ru; M = Os, n = 3 10-Os) and {(L)(OC)₈(μ-H)₃M₃}C(CC)_nC{Co₃(μ-dppm)(CO)₇} (n = 1, M = Ru, L = CO 11, PPh₃12-Ru/P; n = 2, L = CO 12-Ru, PPh₃13; M = Os, L = CO 12-Os) in good to excellent yields. X-ray structural determinations of 2-5, 6-Ru, 6-Os, 7, 9, 11, 12-Ru, 12-Os and 12-Ru/P are reported.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Stepwise syntheses, structure and spectroscopic studies of ruthenium complexes of 2,6-bis(benzimidazol-2-yl)pyridine with o-iminoquinone ancillary ligand

The ruthenium complexes [Ru^II(bbp)(L)(Cl)] (1), [Ru^II(bbp)(L)(H₂O)] (2) and [Ru^II(bbp)(L)(DMSO)] (3) {bbp = 2,6-bis(benzimidazol-2-yl)pyridine, L = o-iminoquinone} have been synthesized in a stepwise manner starting from [Ru^III(bbp)Cl₃]. The single crystal X-ray structures, except for the complex 2, have been determined. All the complexes were characterized by UV-Vis, FT-IR, ¹H NMR, Mass spectroscopic techniques and cyclic voltammetry. The Ru^III/Ru^II couple for complexes 1, 2, and 3 appears at 0.63, 0.49, 0.55 V, respectively versus SCE. It is observed that complex 2, on refluxing in acetonitrile, results into [Ru^II(bbp)(L)(CH₃CN)], 4 which has been prepared earlier in a different method. The structural, spectral and electrochemical properties of complexes 1, 2 and 3 were compared to those of earlier reported complex 4, [Ru^II(bbp)(L)(CH₃CN)].     

Interaction of Pt(II) and Pd(II) complexes of terpyridine with 1-methylazoles: A combined experimental and density functional study

The synthesis and characterization of several complexes of the composition [{M(terpy)}_n(L)](ClO₄)_m (M = Pt, Pd; L = 1-methylimidazole, 1-methyltetrazole, 1-methyltetrazolate; terpy = 2,2′:6′,2″-terpyridine; n = 1, 2; m = 1, 2, 3) is reported and their applicability in terms of a metal-mediated base pair investigated. Reaction of [M(terpy)(H₂O)]²⁺ with 1-methylimidazole leads to [M(terpy)(1-methylimidazole)](ClO₄)₂ (1: M = Pt; 2: M = Pd). The analogous reaction of [Pt(terpy)(H₂O)]²⁺ with 1-methyltetrazole leads to the organometallic compound [Pt(terpy)(1-methyltetrazolate)]ClO₄ (3) in which the aromatic tetrazole proton has been substituted by the platinum moiety. For both platinum(II) and palladium(II), doubly metalated complexes [{M(terpy)}₂(1-methyltetrazolate)](ClO₄)₃ (4: M = Pt; 5: M = Pd) can also be obtained depending on the reaction conditions. In the latter two compounds, the [M(terpy)]²⁺ moieties are coordinated via C5 and N4. X-ray crystal structures of 1, 2, and 3 are reported. In addition, DFT calculations have been carried out to determine the energy difference between fully planar [Pd(mterpy)(L)]²⁺ complexes Ip-IVp (mterpy = 4′-methyl-2,2′:6′,2″-terpyridine; L = 1-methylimidazole-N3 (I), 1-methyl-1,2,4-triazole-N4 (II), 1-methyltetrazole-N3 (III), or 3-methylpyridine-N1 (IV)) and the respective geometry-optimized structures Io-IVo. Whereas this energy difference is larger than 70 kJ mol⁻¹ for compounds I, II, and IV, it amounts to only 0.8 kJ mol⁻¹ for the tetrazole-containing complex III, which is stabilized by two intramolecular C-H?N hydrogen bonds. Of all complexes under investigation, only the terpyridine-metal ion-tetrazole system with N3-coordinated tetrazole appears to be suited for an application in terms of a metal-mediated base pair in a metal-modified oligonucleotide.     

Lewis-base copper(I) formates: Synthesis, reaction chemistry, structural characterization and their use as spin-coating precursors for copper deposition

Consecutive synthesis methodologies for the preparation of a series of copper(I) formates [L_mCuO₂CH] (L = ⁿBu₃P: 4a, m = 1; 4b, m = 2; 5, L = [Ti](CCSiMe₃)₂, m = 1, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and [L_mCuO₂CH·HO₂CR] (L = ⁿBu₃P: 7a, m = 1, R = H; 7b, m = 2, R = H; 7c, m = 2, R = Me; 7d, m = 2, R = CF₃; 7e, m = 2, R = Ph. L = (^cC₆H₁₁)₃P, R = H: 8a, m = 2; 8b, m = 3. L = (CF₃CH₂O)₃P, R = H: 9a, m = 2; 9b, m = 3. L = (CH₃CH₂O)₃P, R = H: 10a, m = 2; 10b, m = 3. L = [Ti](CCSiMe₃)₂; m = 1: 11a, R = H; 11b, R = Ph) is reported using [CuO₂CH] (1) and L (2a, L = ⁿBu₃P; 2b, L (^cC₆H₁₁)₃P; 2c, L = (CF₃CH₂O)₃P; 2d, L = (CH₃CH₂O)₃P; 3, L = [Ti](CCSiMe₃)₂) as key starting materials. Addition of formic acid (6a) or carboxylic acid HO₂CR (6b, R = Me; 6c, R = CF₃; 6d, R = Ph) to the afore itemized copper(I) formates 4 and 5 gave metal-organic or organometallic 7-11. The molecular structures of 8a and 11a in the solid state are reported showing a threefold coordinated copper(I) ion, setup by either two coordinatively-bonded phosphorus atoms and one formate oxygen atom (8a) or two π-bonded alkyne ligands and one oxygen atom (11a). A formic acid molecule is additionally hydrogen-bonded to the CuO₂CH moiety. The use of 7b as suitable precursor for the deposition of copper onto TiN-coated oxidized silicon wafers by the spin-coating process below 300 °C is described. Complex 7b offers an appropriate transformation behavior into metal phase by an elimination-decarboxylation mechanism. The morphology of the copper films strongly depends on the annealing conditions. A closed grain network densified by a post-treatment is obtained (8 °C min⁻¹, N₂/H₂ carrier gas). Hydrogen post-anneal to 420 °C after film deposition gave a copper film showing resistivities from 2.5 to 3.7 μΩ cm. This precursor was also used for gap-filling processes.     

Novel mononuclear η-pentamethylcyclopentadienyl complexes of platinum group metals bearing pyrazolylpyridazine ligands: Syntheses and spectral studies

Condensation of 3,6-dichloropyridazine with 3,5-dimethylpyrazole in 1:1 ratio yielded one side substituted pyrazolylpyridazine ligand 3-chloro-6-(3,5-dimethylpyrazolyl)pyridazine (L) while condensation of 3,6-dichloropyridazine with substituted pyrazoles in 1:2 ratio yielded both side substituted pyrazolylpyridazine ligands such as 3,6-bis(pyrazolyl)pyridazine (L1), 3,6-bis(3-methylpyrazolyl)pyridazine (L2) and 3,6-bis(3,5-dimethylpyrazolyl)pyridazine (L3). A new series of cationic mononuclear complexes of the type [(η⁵-Cp)M_a(L)(PPh₃)]PF₆, [(η⁵-Cp*)M_b(L)Cl]PF₆, [(η⁵-Cp*)Ru(L′)(PPh₃)]PF₆ and [(η⁵-Cp*)M_b(L′)Cl]⁺ (where M_a = Ru, Os; M_b = Rh, Ir and L′ = L1, L2, L3) bearing pyrazolylpyridazine and η⁵-cyclopentadienyl ligands are reported. The complexes have been completely characterized by spectral studies. The molecular structures of representative complexes have been determined by single crystal X-ray crystallography.     

Synthesis and characterisation of new N1-alkyl-3,5-dipyridylpyrazole derived ligands. Study of their reactivity with Pd(II) and Pt(II)

Two new pyrazole-derived ligands, 1-ethyl-3,5-bis(2-pyridyl)pyrazole (L¹) and 1-octyl-3,5-bis(2-pyridyl)pyrazole (L²), both containing alkyl groups at position 1 were prepared by reaction between 3,5-bis(2-pyridyl) pyrazole and the appropriate bromoalkane in toluene using sodium ethoxide as base.The reaction between L¹, L² and [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) resulted in the formation complexes of formula [MCl₂(L)] (M = Pd(II), L = L¹ (1); M = Pd(II), L = L² (2); M = Pt(II), L = L¹ (3); M = Pt(II), L = L² (4)). These complexes were characterised by elemental analyses, conductivity measurements, infrared, ¹H, ¹³C{¹H} NMR and HMQC spectroscopies. The X-ray structure of the complex [PtCl₂(L²)] (4) was determined. In this complex, Npyridine and Npyrazole donor atoms coordinate the ligand to the metal, which complete its coordination with two chloro ligands in a cis disposition.     

Neutral and cationic rare-earth metal alkyl complexes that contain bis(2-methoxyethyl)(trimethylsilyl)amine, a neutral [ONO]-type ligand

Neutral tris(trimethylsilylmethyl) complexes [Ln(CH₂SiMe₃)₃(L)] (Ln = Sc (1), Lu (2)) and cationic bis(trimethylsilylmethyl) complexes [Ln(CH₂SiMe₃)₂(L)(THF)]⁺[BPh₄]⁻, (Ln = Sc (3), Lu (4)) that contain bis(2-methoxyethyl)(trimethylsilyl)amine (L = Me₃SiN(CH₂CH₂OMe)₂) as a neutral, tridentate ligand were synthesized and characterized by NMR spectroscopy. X-ray structural analysis was performed for the scandium complex 1 and exhibited a distorted octahedral coordination geometry with a facially arranged ligand at the neutral scandium center. NMR spectroscopy corroborated the coordination of the tertiary amine function of the ligand to the metal. Complexes 3 and 4 expand the still limited range of cationic rare-earth metal alkyl complexes with known neutral, multidentate ligands.     

Triorganotin(IV) complexes of Schiff base derived from 6-amino-2-mercaptobenzothiazole: Synthesis, characterization and X-ray crystal structures

Nine triorganotin(IV) complexes of the type R₃SnL (L = L1 R = Me 1, Ph 2, PhCH₂3; L = L2 R = Me 4, Ph 5, PhCH₂6; L = L2 R = Me 7, Ph 8, PhCH₂9) have been obtained by reaction of new Schiff base HL1, HL2 or HL3 with triorganotin(IV) chloride in the presence of sodium ethoxide. All the complexes 1-9 were characterized by elemental, IR and NMR spectra analyses. Except for complexes 3, 4, 6, 9, the others were also characterized by X-ray crystallography diffraction analyses, which revealed that complexes 1, 2, 5, 7, 8 were four coordinated and displayed a capped tetrahedron.     

Syntheses, crystal structures, and characterization of heteronuclear complexes based on a versatile ligand with both acetylacetonate and bis(2-pyridyl) units

A new type of multidentate ligand with both acetylacetonate and bis(2-pyridyl) units on the 1,3-dithiole moiety, 3-[2-(dipyridin-2-yl-methylene)-5-methylsulfanyl-[1,3]dithiol-4-ylsulfanyl]-pentane-2, 4-dione (L), has been prepared. Through reactions of the ligand with Re(CO)₅X (X = Cl, Br), new rhenium(I) tricarbonyl complexes ClRe(CO)₃(L) (2) and BrRe(CO)₃(L) (3), have been obtained. With the use of 2 or 3 as the precursors, the further reactions with (Tp^Ph2)Co(OAc)(Hpz^Ph2) (Tp^Ph2 = hydrotris(3,5-diphenylpyrazol-1-yl)borate); Hpz^Ph2 = 3,5-diphenyl-pyrazole) or M(OAc)₂(M = Mn, Zn), afford four new heteronuclear complexes: ClRe(CO)₃(L)Co(Tp^Ph2) (4), BrRe(CO)₃(L)Co(Tp^Ph2) (5), [ClRe(CO)₃(L)]₂Mn(CH₃OH)₂ (6) and [ClRe(CO)₃(L)]₂Zn(CH₃OH)₂ (7), respectively. Crystal structures of complexes 2 and 4-7 have been determined by X-ray diffraction. Their absorption spectra, photoluminescence and magnetic properties have been studied.     

Supramolecular assembly driven by hydrogen-bonding and π-π stacking interactions based on copper(II)-terpyridyl complexes

Six 2D and 3D supramolecular complexes [Cu(L1)(O₂CCH₃)₂] · H₂O (1), [Cu₂(L2)₂(μ₂-O₂CCH₃)₂](BF₄)₂ (2), [Cu₂(L1)₂(BDC)(NO₃)₂] · 0.5H₂O (3) [Cu₂(L2)₂(BDC)(NO₃)₂] (4), [Cu₂(L3)₂(BDC)(NO₃)₂] · 0.5H₂O (5) and [Cu₂(L2)₂(BDC)(H₂O)₂](BDC) · 8H₂O (6) (L1 = 4′-(4-pyridyl)-2,2′:6′,2″-terpyridine, L2 = 4′-(2-pyridyl)-2,2′:6′,2″-terpyridine, L3 = 4′-phenyl-2,2′:6′,2″-terpyridine, BDC = 1,4-benzenedicarboxylate), have been prepared and structurally characterized by X-ray diffraction crystallography. In complexes 1, 3, and 4, 1D channels are formed through C-H?O and C-H?N hydrogen-bonding interactions, and further linked into 3D structure via C-H?O and O-H?O interactions. Complex 2 is a 2D layer constructed from intermolecular C-H?F and π-π stacking interactions. In the structure of 6, the BDC²⁻ ions and solvent water molecules form a novel 2D layer containing left- and right-handed helical chains via hydrogen-bonds, and an unusual discrete water octamer is formed within the layer. In 2, 4, 6 and [Ag₂(L2)₂](PF₆)₂ (7) the bonding types of pendent pyridines of L2 depending on the twist about central pyridines are involved in intramolecular (2 and 4), intermolecular (6) or coordination bonds (7) in-twist-order of 5.8°, 3.7°, 28.2° and 38.0°, respectively. Differently, the pendent pyridines of L1 in 1 and 3 form intermolecular hydrogen bonds despite of distinct corresponding twist angles of 25.1° (1) and 42.6°(3). Meanwhile, π-π stacking interactions are present in 1-6 and responsible for the stabilization of these complexes.     

The reactivity of NbX5 (X = F, Cl) with lactons, lactams, and the synthesis of the first nucleobase-containing niobium complex

NbX₅ (X = F, 1a; X = Cl, 1b) reacted with γ-butyrolactone (but), ε-caprolactam (cap), δ-valerolactam (val) in 1:1 M ratio in chlorinated solvent, affording either the neutral coordination adducts NbCl₅L (L = but, 2a; L = val, 2b) or the ionic ones [NbX₄L₂][NbX₆] (X = F, L = but, 3a; X = F, L = val, 3b; X = F, L = cap, 3c; X = Cl, L = cap, 3d). The reaction of 1a with equimolar amount of guanine (gua) in CH₃CN resulted in the formation of the complex [NbF₄(gua)₂][NbF₆], 3e. The addition of two equivalents of organic substrate to 1 gave selectively the compounds NbCl₅L₂ (L = but, 4a; L = val, 4b) or [NbF₄L₄][NbF₆] (L = but, 5a; L = val, 5b; L = cap, 5c). The 1:2 M reaction of 1b with ε-caprolactam proceeded with C-N bond activation and afforded the derivative , 6, in high yield.     

Conversion of 2-(aminomethyl) substituted pyridine and quinoline to their dicarbonyldiimides using copper(II) acetate

In air, hydrated ethanolic (95%) solution of 2-(aminomethyl) substituted pyridine and quinoline, on stirring with half equivalent of Cu(OAc)₂·H₂O, respectively afforded [Cu(bpca)(OAc)(H₂O)]·H₂O (1) and [Cu(bqca)(OAc)(H₂O)] (2) {bpca = bis(2-pyridylcarbonyl)diimide ion and bqca = bis(2-quinolylcarbonyl)diimide ion} in good yields. These reactions involve oxidation of the methylene group and formation of the bond between nitrogen and carbon in N-C(O) through coupling. The complex [Cu(pqca)(OAc)(H₂O)]₃[Cu₂(OAc)₄(EtOH)₂]_1.5 (3) {pqca = (2-pyridylcarbonyl)(2-quinolylcarbonyl)diimide ion} was synthesized by stirring an ethanolic solution of the Schiff base [(2-pyridyl)-N-((2-quinolyl)methylene)methanamine] (L1) and with one equivalent of Cu(OAc)₂·H₂O. A plausible mechanism for the conversion has been proposed. The free ligands were isolated as crystalline solids from compounds 1-3, by extrusion of Cu²⁺ ion using EDTA²⁻. The molecular structures of 1-3 and bqcaH were established by X-ray crystallography and compounds having quinolyl group have π-stacking interactions.     

Bioinspired FeIIICdII and FeIIIHgII complexes: synthesis, characterization and promiscuous catalytic activity evaluation

In this work we report on the synthesis, crystal structure, and physicochemical characterization of the novel dinuclear [Fe^IIICd^II(L)(μ-OAc)₂]ClO₄·0.5H₂O (1) complex containing the unsymmetrical ligand H₂L = 2-bis[{(2-pyridyl-methyl)-aminomethyl}-6-{(2-hydroxy-benzyl)-(2-pyridyl-methyl)}-aminomethyl]-4-methylphenol. Also, with this ligand, the tetranuclear [Fe₂^IIIHg₂^II(L)₂(OH)₂](ClO₄)₂·2CH₃OH (2) and [Fe^IIIHg^II(L)(μ-CO₃)Fe^IIIHg^II(L)](ClO₄)₂·H₂O (3) complexes were synthesized and fully characterized. It is demonstrated that the precursor [Fe^III₂Hg^II₂(L)₂(OH)₂](ClO₄)₂·2CH₃OH (2) can be converted to (3) by the fixation of atmospheric CO₂ since the crystal structure of the tetranuclear organometallic complex [Fe^IIIHg^II(L)(μ-CO₃)Fe^IIIHg^II(L)](ClO₄)₂·H₂O (3) with an unprecedented {Fe^III(μ-O_phenoxo)₂(μ-CO₃)Fe^III} core was obtained through X-ray crystallography. In the reaction 2 → 3 a nucleophilic attack of a Fe^III-bound hydroxo group on the CO₂ molecule is proposed. In addition, it is also demonstrated that complex (3) can regenerate complex (2) in aqueous/MeOH/NaOH solution. Magnetochemical studies reveal that the Fe^III centers in 3 are antiferromagnetically coupled (J = − 7.2 cm^− 1) and that the Fe^III-OR-Fe^III angle has no noticeable influence in the exchange coupling. Phosphatase-like activity studies in the hydrolysis of the model substrate bis(2,4-dinitrophenyl) phosphate (2,4-bdnpp) by 1 and 2 show Michaelis-Menten behavior with 1 being ~ 2.5 times more active than 2. In combination with k_H/k_D isotope effects, the kinetic studies suggest a mechanism in which a terminal Fe^III-bound hydroxide is the hydrolysis-initiating nucleophilic catalyst for 1 and 2. Based on the crystal structures of 1 and 3, it is assumed that the relatively long Fe^III…Hg^II distance could be responsible for the lower catalytic effectiveness of 2.     

Dicopper(II) complexes showing DNA hydrolase activity and monomeric adduct formation with bis(4-nitrophenyl)phosphate

Ferromagnetic dicopper(II) complexes [Cu₂(μ-O₂CCH₃)(μ-OH)(L)₂(μ-L¹)](PF₆)₂, where L = 1,10-phenanthroline (phen), L¹ = H₂O in 1 and L = dipyrido[3,2-d:2′,3′-f]quinoxaline (dpq), L¹ = CH₃CN in 2, are prepared and structurally characterized. Crystals of 1 and 2 belong to the monoclinic space group of P2₁/n and P2₁/m, respectively. The copper(II) centers display distorted square-pyramidal geometry having a phenanthroline base and two oxygen atoms of the bridging hydroxo and acetate group in the basal plane. The fifth coordination site has weak axially bound bridging solvent molecule H₂O in 1 and CH₃CN in 2. The Cu···Cu distances are 3.034 and 3.046 Å in 1 and 2, respectively. The complexes show efficient hydrolytic cleavage of supercoiled pUC19 DNA as evidenced from the mechanistic studies that include T4 DNA ligase experiments. The binuclear complexes form monomeric copper(II) adducts [Cu(L)₂(BNPP)](PF₆) (L = phen, 3; dpq, 4) with bis(4-nitrophenyl)phosphate (BNPP) as a model phosphodiester. The crystal structures of 3 and 4 reveal distorted trigonal bipyramidal geometry in which BNPP binds through the oxygen atom of the phosphate. The kinetic data of the DNA cleavage reactions of the binuclear complexes under pseudo- and true-Michaelis-Menten conditions indicate remarkable enhancement in the DNA hydrolysis rate in comparison to the control data.     

New amino-dithiaphospholanes and phosphoramidodithioites and their rhodium and iridium complexes

New sulfur derivatives of phosphoramidite ligands were synthesized and the impact of the sulfur unit on the spectroscopic properties of their rhodium and iridium complexes was investigated. The new ligands Bn₂NPSCH₂CH₂S^a(P-S^a) (Bn = benzyl, 4), Bn₂NPSCHCHS^a(CH₂)₃C^aH₂(P-S^a)(C^a-S^a) (6) and Bn₂NP(4-XC₆H₄OMe)₂ (X = S, 7a; X = O, 7b) were converted to the rhodium and iridium complexes trans-[Rh(CO)Cl(L)₂] (L = 4, 6, 7), [RhCl(COD)(L)] (L = 4, 6, 7), [IrCl(COD)(7a)] and [IrCl₂Cp∗(6)]. For comparison, some phosphoramidite complexes of these formulations also were synthesized. The new metal complexes were spectroscopically analyzed. For the carbonyl complexes, the ν_CO IR stretching frequencies were lower than for the corresponding phosphite and phosphoramidite ligands. The ¹J_PRh coupling constants for the rhodium complexes with the new ligands were also smaller than for the respective phosphoramidite and phosphite complexes. Finally, the ¹J_PSe coupling constants of the selenides of the new ligands were lower than those of the phosphoramidite ligands but higher than for PPh₃. The spectroscopic data reveal that the new thio ligands 4, 6 and 7a are more electron donating than phosphites and phosphoramidites but less electron donating than PPh₃.     

Syntheses, crystal structures and magnetic properties of trinuclear and [3 × 1 + 1 × 2] pentanuclear complexes derived from a compartmental ligand: Role of solvent on nuclearity and number of components

Reaction of [Cu^IIL⊂(H₂O)] (H₂L = N,N′-ethylenebis(3-ethoxysalicylaldimine)) with nickel(II) perchlorate in 1:1 ratio in acetone produces the trinuclear compound [(Cu^IIL)₂Ni^II(H₂O)₂](ClO₄)₂ (1). On the other hand, on changing the solvent from acetone to methanol, reaction of the same reactants in same ratio produces the pentametallic compound [(Cu^IIL)₂Ni^II(H₂O)₂](ClO₄)₂·2[Cu^IIL⊂(H₂O)]·2MeOH (2A), which loses solvated methanol molecules immediately after its isolation to form [(Cu^IIL)₂Ni^II(H₂O)₂](ClO₄)₂·2[Cu^IIL⊂(H₂O)] (2B). Clearly, formation of 1 versus 2A and 2B is solvent dependent. Crystal structures of 1 and 2A have been determined. Interestingly, compound 2A is a [3 × 1 + 1 × 2] cocrystal. The cryomagnetic profiles of 1 and 2B indicate that the two pairs of copper(II)···nickel(II) ions in the trinuclear cores in both the complexes are coupled by almost identical moderate antiferromagnetic interaction (J = −22.8 cm⁻¹ for 1 and −26.0 cm⁻¹ for 2B).     

Hybrid scorpionate/cyclopentadienyl titanium and zirconium complexes with alkoxide and imido ligands

The reactivity of hybrid scorpionate/cyclopentadienyl ligand-containing trichloride zirconium complexes [ZrCl₃(bpzcp)] (1) [bpzcp = 2,2-bis(3,5-dimethylpyrazol-1-yl)-1,1-diphenylethylcyclopentadienyl] and [ZrCl₃(bpztcp)] (2) [bpztcp = 2,2-bis(3,5-dimethylpyrazol-1-yl)-1-tert-butylethylcyclopentadienyl] toward several lithium alkoxides has been carried out. Thus, alkoxide-containing complexes [ZrCl₂(OR)(bpzcp)] (R = Me, 3; Et, 4; ⁱPr, 5; (R)-2-Bu, 6), [ZrCl₂(OR)(bpztcp)] (R = Me, 7; Et, 8; ⁱPr, 9; (R)-2-Bu, 10) and [Zr(OR)₃(bpztcp)] (R = Et, 11; ⁱPr, 12) were prepared by deprotonation of the appropriate alcohol group with BuⁿLi followed by reaction with 1 or 2. In addition, the imido-complex [Ti(N^tBu)Cl(bpztcp)(py)] (13) were also prepared. The structures of these complexes have been proposed on basis of spectroscopic and DFT methods.     

One-pot syntheses of alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III) bearing p-cymene or pentamethylcyclopentadienyl groups

Reaction of [(p-cymene)RuCl₂(PPh₃)] (1) or [Cp^∗MCl₂(PPh₃)] (Cp^∗ = C₅Me₅) (3a: M = Rh; 4a: M = Ir) with 1-alkynes and PPh₃ were carried out in the presence of KPF₆, generating the corresponding alkenyl-phosphonio complexes, [(p-cymene)RuCl(PPh₃){CHCR(PPh₃)}](PF₆) (2a: R = Ph; 2b: R = p-tolyl) or [Cp^∗MCl(PPh₃){CHCPh(PPh₃)}](PF₆) (5: M = Rh; 6: M = Ir). Similar reactions of complexes [Cp^∗RhCl₂(L¹)] (3a: L¹ = PPh₃; 3c: L¹ = P(OMe)₃) with L² (L² = PPh₃, PMePh₂, P(OMe)₃) gave [Cp^∗RhCl(L¹)(L²)](PF₆) (7bb: L¹ = L² = PMePh₂; 7ca: L¹ = P(OMe)₃, L² = PPh₃; 7cc: L¹ = L² = P(OMe)₃). Alkenyl-phosphonio complex 5 was treated with P(OMe)₃ or 2,6-xylyl isocyanide, affording [Cp^∗RhCl(L){CHCPh(PPh₃)}](PF₆) (8a: L = P(OMe)₃; 8b: L = 2,6-xylNC). X-ray structural analyses of 2a, 6 and 8a revealed that the phosphonium moiety bonded to the C_β atom of the alkenyl group are E configuration.