Bis(pyrazolyl) palladium(II), platinum(II) and gold(III) complexes: Syntheses, molecular structures and substitution reactions with l-cysteine

A series of pyrazolyl palladium(II), platinum(II) and gold(III) complexes, [PdCl₂(3,5-R₂bpza)] {R = H (1), R = Me (2), bpza = bis-pyrazolyl acetic acid}, [PtCl₂(3,5-R₂bpza)] {R = H (3a), R = Me (4)}, [AuCl₂(3,5-R₂bpza)]Cl {R = H (5a), R = Me (6a)} and [PdCl₂(3,5-R₂bpzate)] {R = Me (7)} have been synthesised and structurally characterised. Single crystal X-ray crystallography showed that the pyrazolyl ligands exhibit N^N-coordination with the metals. Anticancer activities of six complexes 1-6a were investigated against CHO cells and were found to have low activities. Substitution reactions of selected complexes 1, 2, 3a and 5a with l-cysteine show that the low anticancer activities compounds and that the rate of substitution with sulfur-containing compounds is not the cause of the low anticancer activities.     

Synthesis and characterization of ether-derivatized aminophosphines and their application in C-C coupling reactions

Four new bis(phosphino)amine ligands (Ph₂P)₂N-C₆H₃-R, where R = 3,5-OMe (1), 2,5-OMe (2), 2,4-OMe (3) or 3,4-OMe (4), were prepared via aminolysis of the corresponding dimethoxyanilines with 2 equiv. of diphenylphosphine chloride in the presence of triethyl amine. Oxidation of these ligands with aqueous H₂O₂, elemental S₈ or Se powder afforded the corresponding chalcogen oxides 1a-4a, sulfides 1b-4b and selenides 1c-4c in good yields. Reaction of 1-4 with [MCl₂(cod)] (M = Pt, Pd; cod = cycloocta-1,5-diene) in equimolar ratios afforded cis-[MCl₂{(Ph₂P)₂N-C₆H₃-R}] (M = Pt; R = 3,5-OMe 1d, R = 2,5-OMe 2d, R = 2,4-OMe 3d, and R = 3,4-OMe 4d. M = Pd; R = 3,5-OMe 1e, R = 2,5-OMe 2e, R = 2,4-OMe 3e, and R = 3,4-OMe 4e). Similarly, reaction of [Cu(CH₃CN)₄]PF₆ with the 1-4 in 1:2 ratio gave [Cu{(Ph₂P)₂N-C₆H₃-R}₂]PF₆ (R = 3,5-OMe 1f, 2,5-OMe 2f, 2,4-OMe 3f and 3,4-OMe 4f). All new compounds were fully characterized by spectroscopy and elemental analysis and the molecular structures of seven representative compounds were determined by single-crystal X-ray crystallography. In addition, the palladium complexes were investigated as pre-catalysts in C-C coupling reactions.     

Preparation and photophysical studies of copper(I) and ruthenium(II) complexes of 4,4′-bis(3,5-dimethoxyphenyl)-6,6′-dimethyl-2,2′-bipyridine

We report the synthesis of a new ligand, 4,4′-bis(3,5-dimethoxyphenyl)-6,6′-dimethyl-2,2′-bipyridine, optimised for binding to copper(I) and with pendant functionality that can eventually be developed into metallodendritic structures. The synthesis and photophysical properties of complexes with copper(I) and ruthenium(II) are reported. The solid state structure of the complex [Cu(1)₂][PF₆] · MeCN (1 = 4,4′-bis(3,5-dimethoxyphenyl)-6,6′-dimethyl-2,2′-bipyridine) is also described.     

Influence of substituents on the structures of hybrid complexes constructed from tetranuclear copper(I) 1,2,4-triazolate clusters and octamolybdates

By changing the substituents on 1,2,4-triazole ring, six novel organic-inorganic hybrid complexes constructed from tetranuclear copper(I) 1,2,4-triazolate clusters and octamolybdates, [{Cu₄(L)_x}Mo₈O₂₆] (L = 3,5-diamino-1,2,4-triazole (datrz) and x = 4 for 1; L = 3-amino-1,2,4-triazole (3atrz) and x = 4 for 2; L = 3,5-dimethyl-1,2,4-triazole (dmtrz) and x = 4 for 3; L = 3,5-dimethyl-4-amino-1,2,4-triazole (dmatrz) and x = 6 for 4; L = 3,5-diethyl-4-amino-1,2,4-triazole (deatrz) and x = 4 for 5; L = 3,5-di(n-propyl)-4-amino-1,2,4-triazole (dpatrz) and x = 3 for 6), were obtained. The tetranuclear Cu(I) cluster in compound 1 acts as charge-compensating unit, which is the first polynuclear metal 1,2,4-triazole structure only with N1, N2 bridging mode. Compounds 2, 4, 5 and 6 are of polymeric 1D chains and 3 is of a 2D layer structure. In 2, three distinct Cu(I)-coordination geometries, distorted tetrahedral, T-shaped and V-shaped linear Cu(I), are observed in the same structure. The first extended hybrid structure constructed by δ-octamolybdates is founded in 4. A novel [Mo₈O₂₆]⁴⁻ anion is found in 5, which contains only three crystallographically independent Mo atoms. In compounds 5 and 6, terminal oxo groups of octamolybdate cluster act as μ₃-oxo bridges to link the copper(I) coordination complexes; such an unusual linking manner is unique in the coordination chemistry of octamolybdates with transition metal fragments. The influences of substituent on the structures of the tetranuclear units are also discussed in details.     

Synthesis and characterization of cationic rhodium(I) dicarbonyl complexes

Treatment of Rh(acac)(CO)₂ (acac = acetoacetonate) with perchloric acid followed by addition of an α-diimine (α-diimine = 1,4-bis(Ar)-2,3-dimethyl-1,4-diaza-1,3-butadiene, Ar = 3,5-dimethylphenyl, 1; 3,5-di-tert-butylphenyl, 2; and 3,4,5-trimethoxyphenyl, 3; phenyl, 4; and 4-chlorophenyl, 5) generates a series of complexes of the type [Rh(α-diimine)(CO)₂][ClO₄] 6-10 with varying electronic properties of the supporting diimine ligand. X-ray crystal structures have been determined for the α-diimine ligands 1-5, and complexes 6, 8, and 10.     

Transition metal complexes of 2-amino-3,5-dihalopyridines: Synthesis, structures and magnetic properties of Cu(3,5-diCAP)2X2 and Cu(3,5-diBAP)2X2

A family of bis(2-amino-3,5-dihalopyridine)dihalocopper(II) compounds has been synthesized, including (3,5-diCAP)₂CuCl₂ (1), (3,5-diCAP)₂CuBr₂ (2), (3,5-diBAP)₂CuCl₂ (3), and (3,5-diBAP)₂CuBr₂ (4) [3,5-diCAP = 2-amino-3,5-dichloropyridine; 3,5-diBAP = 2-amino-3,5-dibromopyridine]. These complexes have been analyzed through single crystal X-ray diffraction and temperature dependant magnetic susceptibility. The compounds are all isostructural, forming bi-bridged chains with long Cu-X?Cu bridges in the crystal lattice. The two copper chloride compounds (1 and 3) exhibit weak antiferromagnetic interactions along these chains.     

Synthesis of new palladium(II) compounds with several bidentate nitrogen-donor ligands: Structural analyses by H and C{H} NMR spectroscopy and crystal structures

The reaction of [PdCl₂(CH₃CN)₂] with N-alkylaminopyrazole (NN′) ligands, 1-[2-(ethylamino)ethyl]-3,5-dimethylpyrazole (deae), 1-[2-(ⁱpropylamino)ethyl]-3,5-dimethylpyrazole (deai), and 1-[2-(^tbutylamino)ethyl]-3,5-dimethylpyrazole (deat), affords a series of square planar Pd(II) complexes [PdCl₂(NN′)] (NN′ = deae (1), deai (2) and deat (3)). The solid-state structures of complexes 1 and 3 were determined by single crystal X-ray diffraction studies. The NN′ ligands are coordinated through the N_pz and N_amine atoms to the metal atom, which completes its coordination with two chlorine atoms in a cis disposition. These palladium(II) compounds were characterised by elemental analyses, conductivity measurements, IR, ¹H and ¹³C{¹H} NMR spectroscopies. The NMR studies of the complexes prove the rigid conformation of the ligands when they are complexed.     

Interaction of Pt(II) and Pd(II) complexes of terpyridine with 1-methylazoles: A combined experimental and density functional study

The synthesis and characterization of several complexes of the composition [{M(terpy)}_n(L)](ClO₄)_m (M = Pt, Pd; L = 1-methylimidazole, 1-methyltetrazole, 1-methyltetrazolate; terpy = 2,2′:6′,2″-terpyridine; n = 1, 2; m = 1, 2, 3) is reported and their applicability in terms of a metal-mediated base pair investigated. Reaction of [M(terpy)(H₂O)]²⁺ with 1-methylimidazole leads to [M(terpy)(1-methylimidazole)](ClO₄)₂ (1: M = Pt; 2: M = Pd). The analogous reaction of [Pt(terpy)(H₂O)]²⁺ with 1-methyltetrazole leads to the organometallic compound [Pt(terpy)(1-methyltetrazolate)]ClO₄ (3) in which the aromatic tetrazole proton has been substituted by the platinum moiety. For both platinum(II) and palladium(II), doubly metalated complexes [{M(terpy)}₂(1-methyltetrazolate)](ClO₄)₃ (4: M = Pt; 5: M = Pd) can also be obtained depending on the reaction conditions. In the latter two compounds, the [M(terpy)]²⁺ moieties are coordinated via C5 and N4. X-ray crystal structures of 1, 2, and 3 are reported. In addition, DFT calculations have been carried out to determine the energy difference between fully planar [Pd(mterpy)(L)]²⁺ complexes Ip-IVp (mterpy = 4′-methyl-2,2′:6′,2″-terpyridine; L = 1-methylimidazole-N3 (I), 1-methyl-1,2,4-triazole-N4 (II), 1-methyltetrazole-N3 (III), or 3-methylpyridine-N1 (IV)) and the respective geometry-optimized structures Io-IVo. Whereas this energy difference is larger than 70 kJ mol⁻¹ for compounds I, II, and IV, it amounts to only 0.8 kJ mol⁻¹ for the tetrazole-containing complex III, which is stabilized by two intramolecular C-H?N hydrogen bonds. Of all complexes under investigation, only the terpyridine-metal ion-tetrazole system with N3-coordinated tetrazole appears to be suited for an application in terms of a metal-mediated base pair in a metal-modified oligonucleotide.     

X-ray structure and magnetic properties of dinuclear and polymer iron(II) complexes

Five new octahedral iron(II) complexes [FeL2(4-dpa)]_n(EtOH) (1), [FeL2(bipy)]_n(DMF) (2), [FeL1(bpee)]_n (3), [Fe₂L3(1-meim)₄](1-meim)₄ (4) and [FeL1(DMAP)₂] (5), with L1 and L2 being tetradentate coordinating Schiff base like ligands (L1 = (E,E)-[{diethyl-2,2′-[1,2-phenylenebis(iminomethylidyne)]bis[3-oxobutanato](2-)-N,N′,O³,O³′}, L2 = (3,3′)-[{1,2-phenylenebis(iminomethylidyne)]bis(2,4-pentane-dionato)(2-)-N,N′,O²,O²′}) and L3 being a octadentate dinucleating coordinating Schiff base like ligand ({tetraethyl-(E,E,E,E)-2,2′,2′′,2′′′-[1,2,4,5-phenylentetra(iminomethylidine)]tetra[3-oxobutanoato](2-)-N,N′,N′′,N′′′,O³,O³′,O³′′,O³′′′}); 4-dpa = di(4-picolyl)-amine, bipy = 4,4′-bipyridine, bpee = trans-1,2-bis(4-pyridyl)ethylene, 1-meim = 1-methylimidazole and DMAP = 4-dimethylaminopyridine, have been synthesized and characterised using X-ray structure analysis and T-dependent susceptibility measurements. Both methods indicate that all iron(II) centres are in the paramagnetic high-spin state over the whole temperature range investigated. The O-Fe-O angle, the so called bit of the equatorial ligand, is with an average of 111° in the region typical for high-spin iron(II) complexes of this ligand type. In the case of compound 1 an infinite two-dimensional hydrogen bond network can be found, for the compounds 2-4 no hydrogen bond interactions are observed between the complex molecules. A comparison of the curve progression obtained from the magnetic measurements of the mononuclear complex 5 and the polymeric complexes 1-3 leads to the conclusion that no magnetic interactions are mediated over the bridging axial ligands. For the dinuclear complex 4 weak antiferromagnetic interactions between the two iron centres are found.     

Synthesis and reactivity with amines of new diiron alkynyl methoxy carbene complexes

The new diiron alkynyl methoxy carbene complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CCR′}(Cp)₂]⁺ (R = 2,6-Me₂C₆H₃ (Xyl), R′ = Tol, 3a; R = Xyl, R′ = Ph, 3b; R = Xyl, R′=Buⁿ, 3c; R = Xyl, R′=SiMe₃, 3d; R = Me, R′ = Tol, 3e; R = Me, R′ = Ph, 3f) are obtained in two steps by addition of R′CCLi (R′ = Tol, Ph, Buⁿ, SiMe₃) to the carbonyl aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂]⁺ (R = Xyl, 1a; Me, 1b), followed by methylation of the resulting alkynyl acyl compounds [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(O)CCR′}(Cp)₂] (R = Xyl, R′ = Tol, 2a; R = Xyl, R′ = Ph, 2b; R = Xyl, R′ = Buⁿ, 2c; R = Xyl, R′ = SiMe₃, 2d; R = Me, R′ = Tol, 2e; R = Me, R′ = Ph, 2f). Complexes 3 react with secondary amines (i.e., Me₂NH, C₅H₁₀NH) to give the 4-amino-1-metalla-1,3-dienes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO){C(OMe)CHC(R′)(NMe₂)}(Cp)₂]⁺ (R = Xyl, R′ = Tol, 4a; R = Xyl, R′ = Ph, 4b; R = Me, R′ = Ph, 4c) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(Tol)(NC₅H₁₀)}(Cp)₂]⁺, 5. The addition occurs stereo-selectively affording only the E-configured products. Analogously, addition of primary amines R′NH₂ (R′ = Ph, Et, Prⁱ) affords the 4-(NH-amino)-1-metalla-1,3-diene complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(R)(NHR′)}(Cp)₂]⁺ (R = Ph, 6a; Et, 6b; Prⁱ, 6c). In the case of 6a, only the E isomer is formed, whereas a mixture of the E and Z isomers is present in the case of 6b,c, with prevalence of the latter. Moreover, the two isomeric forms exist under dynamic equilibrium conditions, as shown by VT NMR studies. Complexes 6 are deprotonated by strong bases (e.g., NaH) resulting in the formation of the neutral vinyl imine complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CHC(NR)(Tol)}(Cp)₂] (R = Ph, 7a; Et, 7b; Prⁱ, 7c); the reaction can be reverted by addition of strong acids. X-ray crystal structures have been determined for 3a[CF₃SO₃] · Et₂O, 4c[CF₃SO₃], 6a[BF₄] · CH₂Cl₂, 6c[CF₃SO₃] · 0.5Et₂O and 7a · CH₂Cl₂.     

Preparation and characterization of macrocyclic dinickel complexes coligated by monoalkyl- and dialkylcarbamates

The dinuclear nickel(II) complex [Ni₂L(Cl)]⁺ (1), where (L)²⁻ represents a 24-membered binucleating hexamine-dithiophenolate ligand, reacts readily with primary and secondary amines RR′NH in the presence of CO₂ (1 bar) to give dinuclear monoalkyl- and dialkylcarbamate complexes [Ni₂L(O₂CNRR′)]⁺ (R = H, R′ = CH₂Ph (2), R = H, R′ = n-Bu (3), R = H, R′ = n-Oct (4), R = H, R′ = CH₂CH₂OH (5), R = R′ = Et (6), and R = R′ = CH₂CH₂OH (7)). Complexes 2-7 can also be prepared by the reaction of 1 with CO₂(air)/amine. The carbamate complexes are hydrolyzed in methanolic solution to give the known alkylcarbonate complex [Ni₂L(O₂COMe)]⁺ (8). These conversions are less rapid than the transesterification reactions of 8, due to a less electron-demanding carboxyl C(carbamate) atom. All new complexes were either isolated as perchlorate or tetraphenylborate salts and fully characterized by elemental analysis, UV/Vis, and IR spectroscopy. The structures of 2[BPh₄] and 7[BPh₄] have also been determined by X-ray crystallography. They confirm the presence of μ_1,3-bridging alkylcarbamate units in the products.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Functional model for catecholase-like activity: Synthesis, structure, spectra, and catalytic activity of iron(III) complexes with substituted-salicylaldimine ligands

Four new mononuclear iron(III) complexes with the substituted-salicylaldimine ligands, [Fe(L¹)(TCC)] (1), [Fe(L²)(TBC)] (2), [Fe(L³)(TBC)] (3) and [Fe(L⁴)(TCC)](CH₃CN) (4) (HL¹ = N′-(5-OH-salicylaldimine)-diethylenetriamine, HL² = (N′-(5-Cl-salicylaldimine)-diethylenetriamine, HL³ N′-(5-Br-salicyl-aldimine)-dipropylenetriamine, HL⁴ = (N′-3,5-Br-salicylaldimine)-dipropylenetriamine, H₂TCC = tetrachlorocatechol, and H₂TBC = tetrabromocatechol), were prepared and characterized by XRD, EPR, and Mössbauer spectroscopy. The coordination sphere of the Fe(III) in complexes 1-4 is a distorted octahedral with N₃O₃ donors set which constructed by the Schiff-base ligands and the catecholate substrates of TBC or TCC. The in situ prepared Fe(III) complexes [Fe(L¹)Cl₂], [Fe(L²)Cl₂], [Fe(L³)(Cl₂)], and [Fe(L⁴)Cl₂] in absence of TBC or TCC show a high catecholase-like activity for the oxidation of 3,5-DTBC to the corresponding quinone 3,5-DTBQ.     

Synthesis of new platinum(II) complexes containing hybrid thioether-pyrazole ligands: Structural analysis by H and C{H} NMR spectroscopy and X-ray crystal structures

Treatment of the ligands 1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo), 1,9-bis(3,5-dimethyl-1-pyrazolyl)-3,7-dithianonane (bddn), and 1,6-bis(3,5-dimethyl-1-pyrazolyl)-2,5-dithiahexane (bddh) with several platinum starting materials as K₂PtCl₄, PtCl₂, [PtCl₂(CH₃CN)₂] and [PtCl₂(PhCN)₂] was developed under different conditions. The reactions did not yield pure products. The ratio of the NSSN, NS, SS, NN, and 2NS isomers has been calculated through NMR experiments. Treatment of the mixtures of complexes with NaBPh₄ affords [Pt(NSSN)](BPh₄)₂ (NSSN = bddo, bddn). These Pt(II) complexes have been characterised by elemental analyses, conductivity measurements, IR and ¹H and ¹³C NMR spectroscopy. The X-ray structures of the complexes [Pt(NSSN)](BPh₄)₂ (NSSN = bddo, bddn) have also been determined. In these complexes, the metal atom is tetracoordinated by the two azine nitrogen atoms of the pyrazole rings and two thioether sulfur atoms. When the [Pt(NSSN)](BPh₄)₂ (NSSN = bddo, bddn) complexes were heated under reflux in a solution of Et₄NBr in CH₂Cl₂/CH₃OH (1:1), a mixture of isomers was obtained.     

Synthesis, photoluminescence and electrochemiluminescence of ruthenium(II) polypyridyl complexes based on bipyridine derivatives with carbazole moieties

Six complexes (1-6) with the type of [Ru(bpy)₂L]X₂ (1-3: L = L1-L3, X = Cl⁻; 4-6: L = L1-L3, X = PF₆⁻) were synthesized based on 2,2′-bipyridine and three 2,2′-bipyridine derivatives L1, L2 and L3 (L1 = 5,5′-dibromo-2,2′-bipyridine, L2 = 5-bromo-5′-carbazolyl-2,2′-bipyridine, L3 = 5,5′-dicarbazolyl-2,2′-bipyridine). The complexes 1-6 were characterized by ¹H NMR, MS(ESI) and IR spectra, along with the X-ray crystal structure analysis for 1, 5 and 6. Their photophysical properties and electrochemiluminescence (ECL) properties were investigated in detail. In the UV-Vis absorption spectra, all complexes 1-6 show strong intraligand (π → π^∗) transitions and metal-ligand charge transfer (MLCT, dπ (Ru) → π^∗) bands. Upon the excitation wavelengths at ∼508 nm, all complexes 1-6 exhibit typical MLCT emission of ruthenium(II) polypyridyl complexes. The introduction of carbazole moieties improves the MLCT absorption and emission intensity. The ruthenium(II) complexes 1-6 exhibit good electrochemiluminescence (ECL) properties in [Ru(bpy)₂L]²⁺/tri-n-propylamine (TPrA) acetonitrile solution and the complexes with PF₆⁻ showed higher ECL emission intensity than that of the complexes with Cl⁻ based on the same ligands.     

Bis(O2S2 macrocycle) complexes of palladium(II)

Two isomeric dibenzo-O₂S₂ macrocycles L¹ and L² have been synthesised and their coordination chemistry towards palladium(II) has been investigated. Two-step approaches via reactions of 1:1-type complexes, [cis-Cl₂LPd] (1a: L = L¹, 1b: L = L²), with different O₂S₂ macrocycle systems (L¹ and L²) have led to the isolation of the following bis(O₂S₂ macrocycle) palladium(II) complexes in the solid state: [Pd(L¹)₂](ClO₄)₂ (2a) and a mixture of [Pd(L¹)₂](ClO₄)₂ (2a) + [Pd(L²)₂](ClO₄)₂ (2b).     

Functional mimics of catechol oxidase by mononuclear copper complexes of sterically demanding [NNO] ligands

Several mononuclear copper complexes 1(a-b) and 2(a-b) supported over sterically demanding [NNO] ligands namely, N-(aryl)-2-[(pyridin-2-ylmethyl)amino]acetamide [aryl = 2,6-diethylphenyl (1) and mesityl (2)], exhibit catecholase-like activity in performing the aerial oxidation of 3,5-di-t-butylcatehol (3,5-DTBC) to 3,5-di-t-butyl-catequinone (3,5-DTBQ) under ambient conditions. The 1(a-b) and 2(a-b) complexes were directly synthesized from the reaction of the respective ligands 1-2 with CuX₂·nH₂O (X = Cl, NO₃, n = 2, 3) in 55-85% yield. Mechanistic insights on the catalytic cycle as obtained by density functional theory studies for a representative complex 1a suggest that an intramolecular hydrogen transfer, from a catechol-OH moiety to a copper bound superoxo moiety, form the rate-determining step of the oxidation process, displaying an activation barrier of 18.3 kcal/mol (ΔG^‡) [6.9 kcal/mol in Δ(PE + ZPE)^‡ scale].     

Influence of the phosphine arrangement on the reactivity of palladium(II) and platinum(II) polyphosphine complexes with copper(I) chloride

The distorted square-planar complexes [Pd(PNHP)Cl]Cl (1) (PNHP = bis[2-(diphenylphosphino)ethyl]amine), [M(P₃)Cl]Cl [P₃ = bis[2-(diphenylphosphino)ethyl]phenylphosphine; M = Pd (2), Pt (3)] and [Pt(NP₃)Cl]Cl (5) (NP₃ = tris[2-(diphenylphosphino)ethyl]amine), coexisting in the later case with a square-pyramidal arrangement, react with one equivalent of CuCl to give the mononuclear heteroionic systems [M(L)Cl](CuCl₂) [L = PNHP, M = Pd (1a); L = P₃, M = Pd (2a), Pt (3a); L = NP₃, M = Pt (5a)]. The crystal structure of 3a confirms that Pt(II) retains the distorted square-planar geometry of 3 in the cation with P₃ acting as tridentate chelating ligand, the central P atom being trans to one chloride. The counter anion is a nearly linear dichlorocuprate(I) ion. However, the five-coordinate complexes [Pd(NP₃)Cl]Cl (4), [M(PP₃)Cl]Cl (M = Pd (6), Pt (7); PP₃ = tris[2-(diphenylphosphino)ethyl] phosphine) containing three fused five-membered chelate rings undergo a ring-opening by interaction with one (4, 6, 7) and two (6, 7) equivalents of CuCl with formation of neutral MCu(L)Cl₃ [L = NP₃, M = Pd (4a); L = PP₃, M = Pd (6a), Pt (7a)] and ionic [MCu(PP₃)Cl₂](CuCl₂) [M = Pd (6b), Pt (7b)] compounds, respectively. The heteronuclear systems were shown by ³¹P NMR to have structures where the phosphines are acting as tridentate chelating ligands to M(II) and monodentate bridging to Cu(I). Further additions of CuCl to the neutral species 6a and 7a in a 1:1 ratio resulted in the achievement of the ionic complexes 6b and 7b with ions as counter anions. It was demonstrated that the formation of heterobimetallic or just mononuclear mixed salt complexes was clearly influenced by the polyphosphine arrangement with the tripodal ligands giving the former compounds. However, complexes [M(NP₃)Cl]Cl constitute one exception and the type of reaction undergone versus CuCl is a function of the d⁸ metal centre.     

Synthesis and characterisation of new N1-alkyl-3,5-dipyridylpyrazole derived ligands. Study of their reactivity with Pd(II) and Pt(II)

Two new pyrazole-derived ligands, 1-ethyl-3,5-bis(2-pyridyl)pyrazole (L¹) and 1-octyl-3,5-bis(2-pyridyl)pyrazole (L²), both containing alkyl groups at position 1 were prepared by reaction between 3,5-bis(2-pyridyl) pyrazole and the appropriate bromoalkane in toluene using sodium ethoxide as base.The reaction between L¹, L² and [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) resulted in the formation complexes of formula [MCl₂(L)] (M = Pd(II), L = L¹ (1); M = Pd(II), L = L² (2); M = Pt(II), L = L¹ (3); M = Pt(II), L = L² (4)). These complexes were characterised by elemental analyses, conductivity measurements, infrared, ¹H, ¹³C{¹H} NMR and HMQC spectroscopies. The X-ray structure of the complex [PtCl₂(L²)] (4) was determined. In this complex, Npyridine and Npyrazole donor atoms coordinate the ligand to the metal, which complete its coordination with two chloro ligands in a cis disposition.     

Design,synthesis, DNA-binding affinity,cytotoxicity, apoptosis,and cell cycle arrest of Ru(II) polypyridyl complexes

A novel polypyridyl ligand CNPFIP (CNPFIP = 2-(5(4-chloro-2-nitrophenyl)furan-2-yl)-1H-imidazo[4,5f][1,10]phenanthroline) and its mononuclear Ru(II) polypyridyl complexes of [Ru(phen)₂CNPFIP]²⁺(1) (phen = 1,10-phenanthroline), [Ru(bpy)₂CNPFIP]²⁺(2) (bpy = 2,2′-bipyridine), and [Ru(dmb)₂CNPFIP]²⁺(3) (dmb = 4,4′-dimethyl-2,2′-bipyridine) have been synthesized successfully and characterized thoroughly by elemental analysis, UV/Vis, IR, NMR, and ESI-MS. The interaction of the Ru(II) complexes with calf thymus DNA (CT-DNA) was investigated by absorption titration, fluorescence, viscosity measurements. The experimental results suggest that three complexes bind to CT-DNA through an intercalative mode and the DNA-binding affinity of complex 1 is greater than that of complexes 2 and 3. The photocleavage of plasmid pBR322 DNA by ruthenium complexes 1, 2, and 3 was investigated. We have also tested three complexes for their antimicrobial activity against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria. The in vitro cytotoxicity of these complexes was evaluated by MTT assay, and complex 1 shows higher cytotoxicity than 2 and 3 on HeLa cells. The induced apoptosis and cell cycle arrest of HeLa cells were investigated by flow cytometry for 24 h. The molecular docking of ruthenium complexes 1, 2, and 3 with the active site pocket residues of human DNA TOP1 was performed using LibDock.