Isolation and Characterization of a Novel Lysine Racemase from a Soil Metagenomic Library

A lysine racemase (lyr) gene was isolated from a soil metagenome by functional complementation for the first time by using Escherichia coli BCRC 51734 cells as the host and d-lysine as the selection agent. The lyr gene consisted of a 1,182-bp nucleotide sequence encoding a protein of 393 amino acids with a molecular mass of about 42.7 kDa. The enzyme exhibited higher specific activity toward lysine in the l-lysine-to-d-lysine direction than in the reverse reaction.Amino acids are the building blocks of proteins and play an important role in the regulation of the metabolism of living organisms. Among two enantiomers of naturally occurring amino acids, l-amino acids are predominant in living organisms, while d-amino acids are found in both free and bound states in various organisms like bacteria (36), yeasts (35), plants (47), insects (11), mammals (17), bivalves (39), and fish (28). The d-amino acids are mostly endogenous and produced by racemization from their counterparts by the action of a racemase. Thus, the amino acid racemases are involved in d-amino acid metabolism (29, 46). Since the discovery of alanine racemase in 1951 (42), several racemases toward amino acids, such as those for glutamate, threonine, serine, aspartate, methionine, proline, arginine, and phenylalanine, have been reported in bacteria, archaea, and eukaryotes, including mammals (1, 2, 15, 30, 31, 44). They are classified into two groups: pyridoxal 5′-phosphate (PLP)-dependent and PLP-independent enzymes (9, 36).Lysine racemase (Lyr, EC 5.1.1.5) was first reported in Proteus vulgaris ATCC 4669 (19) and proposed to be involved in the lysine degradation of bacterial cells (5, 19). Catabolism of lysine occurs via two parallel pathways. In one of the pathways, δ-aminovalerate is the key metabolite, whereas in the other l-lysine is racemized to d-lysine, and l-pipecolate and α-aminoadipate (AMA) are the key metabolites (5). d-Lysine catabolism proceeds through a series of cyclized intermediates which are necessary to regenerate an α-amino acid and comprise the following metabolites (AMA pathway): d-lysine→α-keto-ɛ-amino caproate→Δ¹-piperideine-2-carboxylate→pipecolate→Δ¹-piperideine-6-carboxylate→α-amino-δ-formylcaproate→α-AMA→α-ketoadipate (6, 7, 12, 27). The final product is converted to α-ketoglutarate via a series of coenzyme A derivatives and subsequently participates as an intermediate in the Krebs cycle. This pathway suggests that the biological function of d-lysine in the bacteria is that of a carbon or nitrogen source. Racemization of added l-lysine to d-lysine by whole cells of Proteus spp. and Escherichia spp. (19) and by the cell extract of Pseudomonas putida ATCC 15070 (5, 20) has been found. However, the enzyme has not been purified to homogeneity, and thus, its molecular and catalytic characteristics, including its gene structure, have not been elucidated. In this study, we explored a metagenomic library constructed from a garden soil to isolate a novel Lyr enzyme. After expression in Escherichia coli, the purified enzyme was characterized in terms of optimal pH and temperature, thermal stability, and racemization activity.     

Design of a Potent d-Peptide HIV-1 Entry Inhibitor with a Strong Barrier to Resistance

The HIV gp41 N-trimer pocket region is an ideal viral target because it is extracellular, highly conserved, and essential for viral entry. Here, we report on the design of a pocket-specific d-peptide, PIE12-trimer, that is extraordinarily elusive to resistance and characterize its inhibitory and structural properties. d-Peptides (peptides composed of d-amino acids) are promising therapeutic agents due to their insensitivity to protease degradation. PIE12-trimer was designed using structure-guided mirror-image phage display and linker optimization and is the first d-peptide HIV entry inhibitor with the breadth and potency required for clinical use. PIE12-trimer has an ultrahigh affinity for the gp41 pocket, providing it with a reserve of binding energy (resistance capacitor) that yields a dramatically improved resistance profile compared to those of other fusion inhibitors. These results demonstrate that the gp41 pocket is an ideal drug target and establish PIE12-trimer as a leading anti-HIV antiviral candidate.The HIV envelope protein (Env) mediates viral entry into cells (11). Env is cleaved into surface (gp120) and transmembrane (gp41) subunits that remain noncovalently associated to form trimeric spikes on the virion surface (16). gp120 recognizes target cells by interacting with cellular receptors, while gp41 mediates membrane fusion. Peptides derived from heptad repeats near the N and C termini of the gp41 ectodomain (N and C peptides) interact in solution to form a six-helix bundle, representing the postfusion structure (3, 55, 56). In this structure, N peptides form a central trimeric coiled coil (N trimer), creating grooves into which C peptides bind. This structure, in conjunction with the dominant-negative inhibitory properties of exogenous N and C peptides, suggests a mechanism for Env-mediated entry (10, 22, 58-60).During entry, gp41 forms an extended prehairpin intermediate that leaves the exposed N-trimer region vulnerable to inhibition for several minutes (18, 35). This intermediate ultimately collapses as the C-peptide regions bind to the N-trimer grooves to form a trimer of hairpins (six-helix bundle), juxtaposing viral and cellular membranes and inducing fusion. Enfuvirtide (Fuzeon), the only clinically approved HIV fusion inhibitor, is a C peptide that binds to part of the N-trimer groove and prevents six-helix bundle formation in a dominant-negative manner (61). Enfuvirtide is active in patients with multidrug resistance to other classes of inhibitors and is a life-prolonging option for these patients (30, 31). However, enfuvirtide use is restricted to salvage therapy due to several limitations, including (i) high dosing requirements (90 mg, twice-daily injections), (ii) high cost (∼$30,000/year/patient in the United States), and (iii) the rapid emergence of resistant strains (21, 47).A deep hydrophobic pocket at the base of the N-trimer groove is an especially attractive inhibitory target because of its high degree of conservation (3, 12, 48), poor tolerance to substitution (4, 34), and critical role in membrane fusion (2). Indeed, this region is conserved at both the amino acid level (for gp41 function in membrane fusion) and the nucleotide level (for the structured RNA region of the Rev-responsive element). Enfuvirtide binds to the N-trimer groove just N terminal to the pocket and is significantly more susceptible to resistance mutations than 2nd-generation C-peptide inhibitors, such as T-1249, that also bind to the pocket (8, 13, 29, 44, 46, 47, 58).Peptide design, molecular modeling, and small-molecule screening have produced a diverse set of compounds that interact with the gp41 pocket and inhibit HIV-1 entry with modest potency, but often with significant cytotoxicity (7, 14, 15, 17, 23, 24, 26, 34, 51, 54). The first direct evidence that pocket-specific binders are sufficient to inhibit HIV entry came with the discovery of protease-resistant d-peptides identified using mirror-image phage display (12). In this technique, a phage library is screened against a mirror-image version of the target protein (synthesized using d-amino acids) (50). By symmetry, mirror images (d-peptides) of the discovered sequences will bind to the natural l-peptide target. As the mirror images of naturally occurring l-peptides, d-peptides cannot be digested by natural proteases. Protease resistance provides d-peptides theoretical treatment advantages of extended survival in the body and possible oral bioavailability (41, 42, 49).These 1st-generation d-peptide entry inhibitors possess potency against a laboratory-adapted isolate (HXB2) at low to mid-μM concentrations (12). We previously reported an affinity-matured 2nd-generation d-peptide called PIE7, pocket-specific inhibitor of entry 7 (57). A trimeric version of PIE7 is the first high-affinity pocket-specific HIV-1 inhibitor and has potency against X4-tropic (HXB2) and R5-tropic (BaL) strains at sub-nM concentrations. However, significant further optimization is required to create a robust clinical candidate for two reasons. First, this d-peptide is much less potent (requiring high nM concentrations) against JRFL, a primary R5-tropic strain. Therefore, improved PIE potency is necessary to combat diverse primary strains. Second, by improving the affinity of our inhibitors for the pocket target, we hope to provide a reserve of binding energy that will delay the emergence of drug resistance, as described below.We and others have reported a potency plateau for some gp41-based fusion inhibitors that is likely imposed by the transient exposure of the prehairpin intermediate (9, 27, 53, 57). For very high-affinity inhibitors, association kinetics (rather than affinity) limits potency so that two inhibitors with significantly different affinities for the prehairpin intermediate can have similar antiviral potencies. We proposed that overengineering our d-peptides with substantial affinity beyond this potency plateau would provide a reserve of binding energy that would combat affinity-disrupting resistance mutations (57). Such a resistance capacitor should also prevent the stepwise accumulation of subtle resistance mutations in Env by eliminating the selective advantage that such mutants would otherwise confer.Here, we report on the design and characterization of a 3rd-generation pocket-specific d-peptide, PIE12-trimer, with ∼100,000-fold improved target binding compared to that of the best previous d-peptide, significantly broadened inhibitory potency, and an enhanced resistance capacitor that provides a strong barrier to viral resistance. We achieved this increased potency via structure-guided phage display and crosslinker optimization. PIE12-trimer has a dramatically improved resistance profile compared to the profiles of earlier d-peptides, as well as those of enfuvirtide and T-1249. These results validate the resistance capacitor hypothesis and establish PIE12-trimer as a leading anti-HIV therapeutic candidate.     

Molecular Basis of Vancomycin Dependence in VanA-Type Staphylococcus aureus VRSA-9

The vancomycin-resistant Staphylococcus aureus VRSA-9 clinical isolate was partially dependent on glycopeptide for growth. The responsible vanA operon had the same organization as that of Tn1546 and was located on a plasmid. The chromosomal d-Ala:d-Ala ligase (ddl) gene had two point mutations that led to Q260K and A283E substitutions, resulting in a 200-fold decrease in enzymatic activity compared to that of the wild-type strain VRSA-6. To gain insight into the mechanism of enzyme impairment, we determined the crystal structure of VRSA-9 Ddl and showed that the A283E mutation induces new ion pair/hydrogen bond interactions, leading to an asymmetric rearrangement of side chains in the dimer interface. The Q260K substitution is located in an exposed external loop and did not induce any significant conformational change. The VRSA-9 strain was susceptible to oxacillin due to synthesis of pentadepsipeptide precursors ending in d-alanyl-d-lactate which are not substrates for the β-lactam-resistant penicillin binding protein PBP2′. Comparison with the partially vancomycin-dependent VRSA-7, whose Ddl is 5-fold less efficient than that of VRSA-9, indicated that the levels of vancomycin dependence and susceptibility to β-lactams correlate with the degree of Ddl impairment. Ddl drug targeting could therefore be an effective strategy against vancomycin-resistant S. aureus.Methicillin-resistant Staphylococcus aureus (MRSA) bacteria that have acquired the vancomycin resistance vanA operon from glycopeptide-resistant enterococci are designated vancomycin-resistant S. aureus (VRSA) (29). Vancomycin acts by binding to the C-terminal acyl-d-Ala-d-Ala of the undecaprenol-diphosphate MurNAc-pentapeptide intermediate and inhibits transglycosylation and transpeptidation reactions in cell wall peptidoglycan polymerization and cross-linking (30). d-Ala-d-Ala is synthesized by the ATP-dependent d-Ala:d-Ala ligase (Ddl) (EC 6.3.2.4) before its incorporation in peptidoglycan precursors (26, 35). VanA-type vancomycin resistance results from the incorporation into peptidoglycan intermediates of a d-alanyl-d-lactate (d-Ala-d-Lac) depsipeptide, synthesized by a d-Ala:d-Lac ligase, which is responsible for diminished binding affinity of glycopeptides for their target. Kinetic analyses of Ddls have established two subsites in the active site for d-Ala binding (24, 27). The reaction mechanism culminates in the transfer of the γ-phosphoryl of ATP to the carboxyl group of d-Ala₁ to produce an acylphosphate and ADP. The acyl carbon atom of the acylphosphate then reacts with the amino group of d-Ala₂ to yield a tetrahedral intermediate. Finally, the intermediate releases phosphate to yield d-Ala-d-Ala.Mutants of Enterococcus faecium (8, 14), Enterococcus faecalis (34), and S. aureus (23) with an impaired Ddl are able to grow because they use the vancomycin resistance pathway for cell wall synthesis. Since resistance is inducible by the drug, these bacteria require the presence of vancomycin in the culture medium for growth. Ddls from vancomycin-dependent enterococci (14) have mutations affecting amino acids highly conserved in the d-Ala:d-Ala ligase superfamily (10). Molecular modeling based on the X-ray structure of Escherichia coli DdlB (11) revealed that all the mutated residues interact directly with one of the substrates of the enzymatic reaction or stabilize the position of critical residues in the active site. However, the degree of enzyme impairment was not evaluated biochemically. Recently, we reported the mechanism of vancomycin dependence in VanA-type S. aureus VRSA-7 and showed that the chromosomal Ddl had the single mutation N308K, which probably affects the binding of the transition-state intermediate, leading to a 1,000-fold decrease in activity relative to that of the wild-type enzyme (23). Glycopeptide-dependent mutants could therefore be considered useful tools to explore structure-activity relationships of the Ddl, which represents an attractive target for designing new drugs. Here we describe the partially vancomycin-dependent VanA-type S. aureus strain VRSA-9 and report the biochemical and structural characterization of its mutated Ddl.     

Efficient Bioethanol Production by a Recombinant Flocculent Saccharomyces cerevisiae Strain with a Genome-Integrated NADP+-Dependent Xylitol Dehydrogenase Gene

The recombinant industrial Saccharomyces cerevisiae strain MA-R5 was engineered to express NADP⁺-dependent xylitol dehydrogenase using the flocculent yeast strain IR-2, which has high xylulose-fermenting ability, and both xylose consumption and ethanol production remarkably increased. Furthermore, the MA-R5 strain produced the highest ethanol yield (0.48 g/g) from nonsulfuric acid hydrolysate of wood chips.Successful fermentation of lignocellulosic biomass to ethanol is dependent on efficient utilization of d-xylose, which is the second most common fermentable sugar in the hydrolysate. Although the well-known fermentative yeast Saccharomyces cerevisiae is one of the most effective ethanol-producing organisms for hexose sugars, it is not able to ferment d-xylose. However, S. cerevisiae can metabolize an isomerization product of d-xylose, d-xylulose, which is phosphorylated to d-xylulose 5-phosphate, channeled through the pentose phosphate pathway and glycolysis.S. cerevisiae transformed with the XYL1 and XYL2 genes encoding xylose reductase (XR) and xylitol dehydrogenase (XDH) from Pichia stipitis (referred to as PsXR and PsXDH, respectively) acquires the ability to ferment d-xylose to ethanol (2, 5, 6, 9, 10, 12, 22). Furthermore, overexpression of the XKS1 gene encoding xylulokinase (XK) from S. cerevisiae (ScXK) has been shown to aid d-xylose utilization (4, 7, 11, 16, 23), with xylitol still a major by-product. Kuyper et al. (14) also demonstrated the successful fermentation of d-xylose to ethanol using recombinant S. cerevisiae strains expressing fungal xylose isomerase. However, these approaches are insufficient for industrial bioprocesses, mainly due to the low rate of d-xylose fermentation.Xylitol excretion has been ascribed mainly to the difference in coenzyme specificities between PsXR (with NADPH) and PsXDH (with NAD⁺), which creates an intracellular redox imbalance (1). Therefore, modifying the coenzyme specificity of XR and/or XDH by protein engineering is an attractive approach for achieving efficient fermentation of ethanol from d-xylose using recombinant S. cerevisiae. Watanabe et al. (24) previously succeeded in generating several PsXDH mutants (e.g., quadruple ARSdR mutant) with a complete reversal of coenzyme specificity toward NADP⁺ by multiple site-directed mutagenesis on amino acids from the coenzyme-binding domain. The ARSdR mutant (D207A/I208R/F209S/N211R) has more that 4,500-fold-higher catalytic efficiency (k_cat/K_m) with NADP⁺ than the wild-type PsXDH. In addition, we recently found that several laboratory recombinant S. cerevisiae strains, in which the ARSdR mutant, along with PsXR and ScXK, is expressed through a strong constitutive promoter, increased ethanol production from d-xylose at the expense of xylitol excretion (17, 18), probably by maintaining the intracellular redox balance. However, commercialization of lignocellulosic hydrolysate fermentation requires industrial strains that are more robust than laboratory strains (5, 19, 21).A potential host for developing d-xylose-fermenting strains requires an active and efficient pentose phosphate pathway linking the d-xylose-to-d-xylulose pathway to glycolysis. In the case of S. cerevisiae, strains have different d-xylulose fermentation abilities (3, 25), indicating inherent differences in the capacities of these strains to ferment pentose sugars. Furthermore, anaerobic d-xylulose fermentation was investigated to identify genetic backgrounds potentially beneficial to anaerobic d-xylose fermentation in strains not exhibiting product formation related to the redox imbalance generated by the first two steps of the eukaryotic d-xylose metabolism (3), although the physiological purpose of the different d-xylulose fermentation abilities of S. cerevisiae is not yet clear. Therefore, we selected an efficient industrial d-xylulose-fermenting S. cerevisiae strain as a host for constructing a recombinant strain through chromosomal integration of the NADP⁺-dependent XDH gene and the XR and endogenous XK genes. Using this recombinant strain, we characterized the enzyme activity and ability to ferment both d-xylose and lignocellulosic hydrolysate.     

Efficient Production of Optically Pure d-Lactic Acid from Raw Corn Starch by Using a Genetically Modified l-Lactate Dehydrogenase Gene-Deficient and α-Amylase-Secreting Lactobacillus plantarum Strain

In order to achieve direct and efficient fermentation of optically pure d-lactic acid from raw corn starch, we constructed l-lactate dehydrogenase gene (ldhL1)-deficient Lactobacillus plantarum and introduced a plasmid encoding Streptococcus bovis 148 α-amylase (AmyA). The resulting strain produced only d-lactic acid from glucose and successfully expressed amyA. With the aid of secreting AmyA, direct d-lactic acid fermentation from raw corn starch was accomplished. After 48 h of fermentation, 73.2 g/liter of lactic acid was produced with a high yield (0.85 g per g of consumed sugar) and an optical purity of 99.6%. Moreover, a strain replacing the ldhL1 gene with an amyA-secreting expression cassette was constructed. Using this strain, direct d-lactic acid fermentation from raw corn starch was accomplished in the absence of selective pressure by antibiotics. This is the first report of direct d-lactic acid fermentation from raw starch.Poly-lactic acid (PLA) is an important agro-based plastic that can be produced from inexpensive, renewable, and abundantly available biomass resources, including starchy materials. These resources have advantages over limited oil- and fossil-based sources, as they do not result in any net carbon dioxide release to the atmosphere (7). Recently, stereocomplex PLA, which is composed of both poly-l- and -d-lactic acid, has been attracting much attention due to its high thermostability. Stereocomplex-type polymers show a melting point (ca. 230°C) that is approximately 50°C higher than that of the respective single polymers (8). Therefore, d-lactic acid, in addition to l-lactic acid, which has been the focus of production to date, is of significant importance.Lactic acid bacteria (LAB) are promising microorganisms for the efficient production of lactic acid from various sugars, such as glucose, sucrose, and lactose. However, when starchy materials are used as a carbon source, they must be saccharified by physicochemical and enzymatic treatment because most LAB cannot utilize starchy materials directly (13). This makes the whole process less economically viable. Therefore, many researchers have examined the direct production of lactic acid from starchy materials by using wild amylolytic LAB (ALAB) (6, 24, 25) or genetically modified amylase-producing LAB (15, 16). Although d-lactic acid has been produced by fermentation from pretreated substrates such as rice starch (5) and by simultaneous saccharification and fermentation from cellulose (23), there have been no reports on the direct production of d-lactic acid from starchy materials. This is due to a lack of d-lactic acid-producing ALAB and difficulties in gene manipulation of d-lactic acid-producing LAB, such as Lactobacillus delbrueckii (22).We focused on Lactobacillus plantarum, which is an industrially important strain due to its environmental flexibility and its ability to assimilate a wide range of carbohydrates (9). In recent years, several gene manipulation methods for Lactobacillus plantarum have been established (18, 19). Moreover, the complete genome sequence has been decoded for L. plantarum NCIMB 8826 (9). Based on whole-genome analysis, L. plantarum possesses two types of lactate dehydrogenase (LDH), l-LDH and d-LDH, which convert pyruvate into l- and d-lactic acid, respectively. Ferain et al. (4) reported that chromosomal deletion in the ldhL1 gene of L. plantarum NCIMB 8826 provoked an absence of l-LDH activity and produced d-lactic acid from glucose.In the present study, to produce d-lactic acid directly from starch, we constructed an l-LDH-deficient, α-amylase-secreting L. plantarum strain. The engineered strain expressed α-amylase from Streptococcus bovis 148 (AmyA) (20) and efficiently degraded raw starch with the aid of a C-terminal starch-binding domain (11). Using this strain, we achieved the direct and efficient fermentation of optically pure d-lactic acid from raw corn starch.     

The Aminolysis Reaction of Streptomyces S9 Aminopeptidase Promotes the Synthesis of Diverse Prolyl Dipeptides

Prolyl dipeptide synthesis by S9 aminopeptidase from Streptomyces thermocyaneoviolaceus (S9AP-St) has been demonstrated. In the synthesis, S9AP-St preferentially used l-Pro-OBzl as the acyl donor, yielding synthesized dipeptides having an l-Pro-Xaa structure. In addition, S9AP-St showed broad specificity toward the acyl acceptor. Furthermore, S9AP-St produced cyclo (l-Pro-l-His) with a conversion ratio of substrate to cyclo (l-Pro-l-His) higher than 40%.Some proline-containing dipeptides and their cyclic analogs exhibit biological activity. For example, cyclo (l-arginyl-d-proline) [c(lR-dP)] is known to act as a specific inhibitor of family 18 chitinase (4, 10). A cyclic peptide, c(lP-lH), produced by the cleavage of thyrotropin-releasing hormone protects against oxidative stress, promotes cytoprotection (6, 7), and exhibits antihyperglycemic activity (11).Some serine peptidases exhibit peptide bond formation (i.e., aminolysis of esters, thioesters, and amides) in accordance with their hydrolytic activity (2, 14). The exchange of catalytic Ser for Cys to engineer the serine endopeptidase into “transpeptidase” for peptide bond formation has been well characterized (3, 5). Our recent approach confirmed the wide distribution of family S9 aminopeptidases that have catalytic Ser in actinomycetes (12). Of them, we obtained S9 aminopeptidase from Streptomyces thermocyaneoviolaceus NBRC14271 (S9AP-St). The enzyme was engineered into “transaminopeptidase” by exchange of catalytic Ser for Cys, and its aminolytic activity was evaluated (13). The engineered enzyme, designated as aminolysin-S, can synthesize hydrophobic dipeptides through an aminolysis reaction. However, aminolysin-S was unable to synthesize peptides containing proline. Although the report of aminolysin-S demonstrated that S9AP-St shows no aminolysis reaction toward limited substrates, details of its characteristics remain unknown. This study verified the peptide synthetic activity of S9AP-St, demonstrating that S9AP-St can synthesize widely varied prolyl dipeptides through an aminolysis reaction. The report also shows that S9AP-St is applicable to the synthesis of a biologically active peptide—c(lP-lH).     

Establishment of Oxidative d-Xylose Metabolism in Pseudomonas putida S12

The oxidative d-xylose catabolic pathway of Caulobacter crescentus, encoded by the xylXABCD operon, was expressed in the gram-negative bacterium Pseudomonas putida S12. This engineered transformant strain was able to grow on d-xylose as a sole carbon source with a biomass yield of 53% (based on g [dry weight] g d-xylose⁻¹) and a maximum growth rate of 0.21 h⁻¹. Remarkably, most of the genes of the xylXABCD operon appeared to be dispensable for growth on d-xylose. Only the xylD gene, encoding d-xylonate dehydratase, proved to be essential for establishing an oxidative d-xylose catabolic pathway in P. putida S12. The growth performance on d-xylose was, however, greatly improved by coexpression of xylXA, encoding 2-keto-3-deoxy-d-xylonate dehydratase and α-ketoglutaric semialdehyde dehydrogenase, respectively. The endogenous periplasmic glucose dehydrogenase (Gcd) of P. putida S12 was found to play a key role in efficient oxidative d-xylose utilization. Gcd activity not only contributes to d-xylose oxidation but also prevents the intracellular accumulation of toxic catabolic intermediates which delays or even eliminates growth on d-xylose.The requirement for renewable alternatives to replace oil-based chemicals and fuels necessitates development of novel technologies. Lignocellulose provides a promising alternative feedstock. However, since the pentose sugar fraction may account for up to 25% of lignocellulosic biomass (12), it is essential that this fraction is utilized efficiently to obtain cost-effective biochemical production. In a previous study, the solvent-tolerant bacterium Pseudomonas putida S12, known for its use as a platform host for the production of aromatic compounds (15, 16, 19, 22), was engineered to use d-xylose as a sole carbon source. This was achieved by introducing genes encoding the phosphorylative d-xylose metabolic pathway of Escherichia coli, followed by laboratory evolution (14). Prior to evolutionary improvement, extensive oxidation of d-xylose to d-xylonate occurred, resulting in a very low biomass-for-substrate yield as d-xylonate is a metabolic dead-end product in P. putida. The evolution approach resulted in elimination of the activity of periplasmic glucose dehydrogenase (Gcd), the enzyme responsible for d-xylose oxidation, which turned out to be a critical step in optimizing phosphorylative d-xylose utilization in P. putida S12.Instead of prevention of endogenous oxidation of d-xylose, this oxidation may be used to our advantage when it is combined with an oxidative d-xylose metabolic pathway, such as the pathways described for several Pseudomonas species, Caulobacter crescentus, and Haloarcula marismortui (7, 11, 18, 20). In these pathways, d-xylonate is dehydrated to 2-keto-3-deoxy-d-xylonate. This intermediate either can be cleaved into pyruvate and glycolaldehyde (7) or is further dehydrated to α-ketoglutaric semialdehyde (α-KGSA). In the final step of the latter pathway, α-KGSA is oxidized to the tricarboxylic acid (TCA) cycle intermediate α-ketoglutarate (18, 20).In addition to Gcd (PP1444), some of the enzymes required for oxidative d-xylose metabolism are expected to be endogenous in P. putida S12. Transport of d-xylonate into the cytoplasm likely occurs through the gluconate transporter (encoded by gntP [PP3417]). The enzyme catalyzing the final step of the pathway, α-KGSA dehydrogenase, is also likely to be present (presumably PP1256 and/or PP3602) because of the requirement for metabolism of 4-hydroxyproline (1), a compound that is efficiently utilized by P. putida S12. In view of these properties, the most obvious approach for constructing d-xylose-utilizing P. putida S12 is reconstruction of a complete oxidative d-xylose metabolic pathway by introducing the parts of such a pathway that complement the endogenous activities. Recently, the genetic information for one such oxidative d-xylose pathway has become available (18), enabling the approach used in the present study, i.e., expression of the oxidative d-xylose metabolic pathway of C. crescentus in P. putida S12 and investigation of the contribution of endogenous enzyme activities.     

Escherichia coli Strains Engineered for Homofermentative Production of d-Lactic Acid from Glycerol

Given its availability and low price, glycerol has become an ideal feedstock for the production of fuels and chemicals. We recently reported the pathways mediating the metabolism of glycerol in Escherichia coli under anaerobic and microaerobic conditions. In this work, we engineer E. coli for the efficient conversion of glycerol to d-lactic acid (d-lactate), a negligible product of glycerol metabolism in wild-type strains. A homofermentative route for d-lactate production was engineered by overexpressing pathways involved in the conversion of glycerol to this product and blocking those leading to the synthesis of competing by-products. The former included the overexpression of the enzymes involved in the conversion of glycerol to glycolytic intermediates (GlpK-GlpD and GldA-DHAK pathways) and the synthesis of d-lactate from pyruvate (d-lactate dehydrogenase). On the other hand, the synthesis of succinate, acetate, and ethanol was minimized through two strategies: (i) inactivation of pyruvate-formate lyase (ΔpflB) and fumarate reductase (ΔfrdA) (strain LA01) and (ii) inactivation of fumarate reductase (ΔfrdA), phosphate acetyltransferase (Δpta), and alcohol/acetaldehyde dehydrogenase (ΔadhE) (strain LA02). A mutation that blocked the aerobic d-lactate dehydrogenase (Δdld) also was introduced in both LA01 and LA02 to prevent the utilization of d-lactate. The most efficient strain (LA02Δdld, with GlpK-GlpD overexpressed) produced 32 g/liter of d-lactate from 40 g/liter of glycerol at a yield of 85% of the theoretical maximum and with a chiral purity higher than 99.9%. This strain exhibited maximum volumetric and specific productivities for d-lactate production of 1.5 g/liter/h and 1.25 g/g cell mass/h, respectively. The engineered homolactic route generates 1 to 2 mol of ATP per mol of d-lactate and is redox balanced, thus representing a viable metabolic pathway.Lactic acid (lactate) and its derivatives have many applications in the food, pharmaceutical, and polymer industries (13, 30). An example is polylactic acid, a renewable, biodegradable, and environmentally friendly polymer produced from d- and l-lactate (19). In this context, biological processes have the advantage of being able to produce chirally pure lactate from inexpensive media containing only the carbon source and mineral salts (43). While lactic acid bacteria traditionally have been used in the production of d-lactate from carbohydrate-rich feedstocks, several laboratories recently have reported alternative biocatalysts (13, 30), many of which are engineered Escherichia coli strains that produce d- or l-lactate (4, 8, 50, 51, 52).Unlike the aforementioned reports, which have dealt with the use of carbohydrates, our work focuses on the use of glycerol as a carbon source for the production of d-lactate. Glycerol has become an inexpensive and abundant substrate due to its generation in large amounts as a by-product of biodiesel and bioethanol production (18, 32, 47). The conversion of glycerol to higher-value products has been proposed as a path to economic viability for the biofuels industry (47). One such product is lactate, whose production could be readily integrated into existing biodiesel and bioethanol facilities, thus establishing true biorefineries.Although many microorganisms are able to metabolize glycerol (25), the use of industrial microbes such as E. coli could greatly accelerate the development of platforms to produce fuels and chemicals from this carbon source. We recently reported on the ability of E. coli to metabolize glycerol under either anaerobic or microaerobic conditions and identified the environmental and metabolic determinants of these processes (9, 11, 28). In one of the studies, the pathways involved in the microaerobic utilization of glycerol were elucidated, and they are shown in Fig. ​Fig.11 (9). A common characteristic of glycerol metabolism under either anaerobic or microaerobic conditions is the generation of ethanol as the primary product and the negligible production of lactate (6, 9, 11, 28). In the work reported here, the knowledge base created by the aforementioned studies was used to engineer E. coli for the efficient conversion of glycerol to d-lactate in minimal medium. The engineered strains hold great promise as potential biocatalysts for the conversion of low-value glycerol streams to a higher-value product like d-lactate.Open in a separate windowFIG. 1.Pathways involved in the microaerobic utilization of glycerol in E. coli (9). Genetic modifications supporting the metabolic engineering strategies employed in this work are illustrated by thicker lines (overexpression of gldA-dhaKLM, glpK-glpD, and ldhA) or cross bars (disruption of pflB, pta, adhE, frdA, and dld). Broken lines illustrate multiple steps. Relevant reactions are represented by the names of the gene(s) coding for the enzymes: aceEF-lpdA, pyruvate dehydrogenase complex; adhE, acetaldehyde/alcohol dehydrogenase; ackA, acetate kinase; dhaKLM, dihydroxyacetone kinase; dld, respiratory d-lactate dehydrogenase; fdhF, formate dehydrogenase, part of the formate hydrogenlyase complex; frdABCD, fumarate reductase; gldA, glycerol dehydrogenase; glpD, aerobic glycerol-3-phosphate dehydrogenase; glpK, glycerol kinase; hycB-I, hydrogenase 3, part of the formate hydrogenlyase complex; ldhA, fermentative d-lactate dehydrogenase; pflB, pyruvate formate-lyase; pta, phosphate acetyltransferase; pykF, pyruvate kinase. Abbreviations: DHA, dihydroxyacetone; DHAP, DHA phosphate; G-3-P, glycerol-3-phosphate; PEP, phosphoenolpyruvate; PYR, pyruvate; P/O, amount of ATP produced in the oxidative phosphorylation per pair of electrons transferred through the electron transport system; QH₂, reduced quinones.     

Substrate Specificity of a Mannose-6-Phosphate Isomerase from Bacillus subtilis and Its Application in the Production of l-Ribose

The uncharacterized gene previously proposed as a mannose-6-phosphate isomerase from Bacillus subtilis was cloned and expressed in Escherichia coli. The maximal activity of the recombinant enzyme was observed at pH 7.5 and 40°C in the presence of 0.5 mM Co²⁺. The isomerization activity was specific for aldose substrates possessing hydroxyl groups oriented in the same direction at the C-2 and C-3 positions, such as the d and l forms of ribose, lyxose, talose, mannose, and allose. The enzyme exhibited the highest activity for l-ribulose among all pentoses and hexoses. Thus, l-ribose, as a potential starting material for many l-nucleoside-based pharmaceutical compounds, was produced at 213 g/liter from 300-g/liter l-ribulose by mannose-6-phosphate isomerase at 40°C for 3 h, with a conversion yield of 71% and a volumetric productivity of 71 g liter⁻¹ h⁻¹.l-Ribose is a potential starting material for the synthesis of many l-nucleoside-based pharmaceutical compounds, and it is not abundant in nature (5, 19). l-Ribose has been produced mainly by chemical synthesis from l-arabinose, l-xylose, d-glucose, d-galactose, d-ribose, or d-mannono-1,4-lactone (2, 17, 23). Biological l-ribose manufacture has been investigated using ribitol or l-ribulose. Recently, l-ribose was produced from ribitol by a recombinant Escherichia coli containing an NAD-dependent mannitol-1-dehydrogenase (MDH) with a 55% conversion yield when 100 g/liter ribitol was used in a 72-h fermentation (18). However, the volumetric productivity of l-ribose in the fermentation is 28-fold lower than that of the chemical method synthesized from l-arabinose (8). l-Ribulose has been biochemically converted from l-ribose using an l-ribose isomerase from an Acinetobacter sp. (9), an l-arabinose isomerase mutant from Escherichia coli (4), a d-xylose isomerase mutant from Actinoplanes missouriensis (14), and a d-lyxose isomerase from Cohnella laeviribosi (3), indicating that l-ribose can be produced from l-ribulose by these enzymes. However, the enzymatic production of l-ribulose is slow, and the enzymatic production of l-ribose from l-ribulose has been not reported.Sugar phosphate isomerases, such as ribose-5-phosphate isomerase, glucose-6-phosphate isomerase, and galactose-6-phosphate isomerase, work as general aldose-ketose isomerases and are useful tools for producing rare sugars, because they convert the substrate sugar phosphates and the substrate sugars without phosphate to have a similar configuration (11, 12, 21, 22). l-Ribose isomerase from an Acinetobacter sp. (9) and d-lyxose isomerase from C. laeviribosi (3) had activity with l-ribose, d-lyxose, and d-mannose. Thus, we can apply mannose-6-phosphate (EC 5.3.1.8) isomerase to the production of l-ribose, because there are no sugar phosphate isomerases relating to l-ribose and d-lyxose. The production of the expensive sugar l-ribose (bulk price, $1,000/kg) from the rare sugar l-ribulose by mannose-6-phosphate isomerase may prove to be a valuable industrial process, because we have produced l-ribulose from the cheap sugar l-arabinose (bulk price, $50/kg) using the l-arabinose isomerase from Geobacillus thermodenitrificans (20) (Fig. ​(Fig.11).Open in a separate windowFIG. 1.Schematic representation for the production of l-ribulose from l-arabinose by G. thermodenitrificans l-arabinose isomerase and the production of l-ribose from l-ribulose by B. subtilis mannose-6-phosphate isomerase.In this study, the gene encoding mannose-6-phosphate isomerase from Bacillus subtilis was cloned and expressed in E. coli. The substrate specificity of the recombinant enzyme for various aldoses and ketoses was investigated, and l-ribulose exhibited the highest activity among all pentoses and hexoses. Therefore, mannose-6-phosphate isomerase was applied to the production of l-ribose from l-ribulose.     

Functional and Biochemical Analysis of the Chlamydia trachomatis Ligase MurE

Chlamydiae are unusual obligately intracellular bacteria that do not synthesize detectable peptidoglycan. However, they possess genes that appear to encode products with peptidoglycan biosynthetic activity. Bioinformatic analysis predicts that chlamydial MurE possesses UDP-MurNAc-l-Ala-d-Glu:meso-diaminopimelic acid (UDP-MurNAc-l-Ala-d-Glu:meso-A₂pm) ligase activity. Nevertheless, there are no experimental data to confirm this hypothesis. In this paper we demonstrate that the murE gene from Chlamydia trachomatis is capable of complementing a conditional Escherichia coli mutant impaired in UDP-MurNAc-l-Ala-d-Glu:meso-A₂pm ligase activity. Recombinant MurE from C. trachomatis (MurE_Ct) was overproduced in and purified from E. coli in order to investigate its kinetic parameters in vitro. By use of UDP-MurNAc-l-Ala-d-Glu as the nucleotide substrate, MurE_Ct demonstrated ATP-dependent meso-A₂pm ligase activity with pH and magnesium ion optima of 8.6 and 30 mM, respectively. Other amino acids (meso-lanthionine, the ll and dd isomers of A₂pm, d-lysine) were also recognized by MurE_Ct. However, the activities for these amino acid substrates were weaker than that for meso-A₂pm. The specificity of MurE_Ct for three possible C. trachomatis peptidoglycan nucleotide substrates was also determined in order to deduce which amino acid might be present at the first position of the UDP-MurNAc-pentapeptide. Relative k_cat/K_m ratios for UDP-MurNAc-l-Ala-d-Glu, UDP-MurNAc-l-Ser-d-Glu, and UDP-MurNAc-Gly-d-Glu were 100, 115, and 27, respectively. Our results are consistent with the synthesis in chlamydiae of a UDP-MurNAc-pentapeptide in which the third amino acid is meso-A₂pm. However, due to the lack of specificity of MurE_Ct for nucleotide substrates in vitro, it is not obvious which amino acid is present at the first position of the pentapeptide.Chlamydiae cause serious respiratory tract and genital infections in humans (9). They are obligately intracellular gram-negative bacteria, with a unique biphasic development cycle. Elementary bodies (EBs) are the infectious form of the organism and invade susceptible host cells. Once internalized, EBs differentiate into reticulate bodies (RBs), which have the capacity to divide (39, 40). The RBs are fragile and pleomorphic, whereas EBs are comparatively rigid and stable (19, 39). After repeated cycles of binary fission, the RBs differentiate into EBs, and the host cell lyses, releasing infectious EBs (1).In contrast to the vast majority of eubacteria, chlamydiae lack detectable amounts of peptidoglycan (PG), an essential polymer. PG is a giant macromolecule composed of alternating N-acetylglucosamine (GlcNAc) and N-acetylmuramic acid (MurNAc) residues cross-linked by short peptides. It determines the shape of bacteria, protects the cell from lysis due to internal osmotic pressure, and also plays a role in cell division. However, PG has not been detected in EBs (14, 20) or RBs (5).Although chlamydiae appear to lack PG, they contain penicillin-binding proteins and are sensitive to antibiotics that inhibit PG synthesis (5, 40). The Chlamydia trachomatis genome contains most of the genes coding for proteins involved in, or associated with, PG synthesis (54). Chlamydial MurA, MurC-Ddl, and the MurC domain of the latter fusion protein are active in vitro and complement Escherichia coli mutants deficient in the respective enzymes (23, 32, 33). Furthermore, proteomic analysis reveals that the murE gene product, which was assigned as UDP-MurNAc-l-Ala-d-Glu:meso-diaminopimelic acid ligase (UDP-MurNAc-l-Ala-d-Glu:meso-A₂pm ligase), is expressed in RBs (52).MurE ligases catalyze the addition of the third amino acid residue to the peptide chain of PG. This residue, generally a diamino acid, is usually meso-A₂pm for gram-negative bacteria and bacilli, and l-lysine for gram-positive bacteria, although other amino acids (for example, l-ornithine, meso-lanthionine, ll-A₂pm, l-diaminobutyric acid, or l-homoserine) occur in certain species (6, 50, 57). In many organisms, the third residue of the peptide chain participates in PG cross-linking; consequently, the MurE enzyme is highly specific for the relevant amino acid so as to avoid incorporation of incorrect amino acids into the macromolecule, which could result in deleterious morphological changes and cell lysis (35). Crystallization of MurE from E. coli (MurE_Ec) has permitted analysis of the structural basis for this high specificity (22). Sequence alignments of different MurE orthologues have also revealed the specific consensus sequences DNPR and D(D/N)P(N/A) located in the binding pockets for meso-A₂pm and l-Lys, respectively (11, 17). Chlamydia trachomatis MurE (MurE_Ct) possesses the DNPR motif, which suggests that it adds meso-A₂pm (17). However, there are no experimental data to confirm this prediction.In this paper we report for the first time the overproduction and purification of MurE_Ct, as well as a detailed investigation of its in vivo and in vitro biochemical properties. These studies contribute to our understanding of the nature and properties of the PG biosynthetic enzymes in chlamydiae and do indeed suggest that MurE_Ct has meso-A₂pm ligase activity.     

The dlt Operon of Bacillus cereus Is Required for Resistance to Cationic Antimicrobial Peptides and for Virulence in Insects

The dlt operon encodes proteins that alanylate teichoic acids, the major components of cell walls of gram-positive bacteria. This generates a net positive charge on bacterial cell walls, repulsing positively charged molecules and conferring resistance to animal and human cationic antimicrobial peptides (AMPs) in gram-positive pathogenic bacteria. AMPs damage the bacterial membrane and are the most effective components of the humoral immune response against bacteria. We investigated the role of the dlt operon in insect virulence by inactivating this operon in Bacillus cereus, which is both an opportunistic human pathogen and an insect pathogen. The Δdlt_Bc mutant displayed several morphological alterations but grew at a rate similar to that for the wild-type strain. This mutant was less resistant to protamine and several bacterial cationic AMPs, such as nisin, polymyxin B, and colistin, in vitro. It was also less resistant to molecules from the insect humoral immune system, lysozyme, and cationic AMP cecropin B from Spodoptera frugiperda. Δdlt_Bc was as pathogenic as the wild-type strain in oral infections of Galleria mellonella but much less virulent when injected into the hemocoels of G. mellonella and Spodoptera littoralis. We detected the dlt operon in three gram-negative genera: Erwinia (Erwinia carotovora), Bordetella (Bordetella pertussis, Bordetella parapertussis, and Bordetella bronchiseptica), and Photorhabdus (the entomopathogenic bacterium Photorhabdus luminescens TT01, the dlt operon of which did not restore cationic AMP resistance in Δdlt_Bc). We suggest that the dlt operon protects B. cereus against insect humoral immune mediators, including hemolymph cationic AMPs, and may be critical for the establishment of lethal septicemia in insects and in nosocomial infections in humans.Gram-positive bacteria are generally enclosed by cell walls consisting of macromolecular assemblies of cross-linked peptidoglycan (murein), polyanionic teichoic acids (TAs), and surface proteins (69). TAs are polymers of repeating glycerophosphate residues. They may be covalently anchored to either peptidoglycan (wall-associated TAs) or the cytoplasmic membrane via glycolipids (lipoteichoic acids [LTAs]). TAs may be involved in controlling cell shape, autolytic enzyme activity, and cation homeostasis (69). They make a significant contribution to the overall negative charge of the bacterial cell wall, attracting negatively charged compounds, including the cationic antimicrobial peptides (AMPs) of the innate humoral immune systems of higher organisms (69).Many of the gram-positive bacterial species pathogenic to humans display resistance to cationic AMPs because of a decrease in the net negative charge of bacterial cell envelopes (75). Modifications to the TAs at the bacterial surface involving the incorporation of positively charged residues, such as d-alanine, prevent cationic AMPs from reaching their target, thereby protecting the organism against these compounds. This process involves the Dlt proteins encoded by the dltABCD operon present in most of the genome sequences established to date for gram-positive bacteria (44, 58, 74). d-Alanine is incorporated into LTAs through a two-step reaction involving a d-alanine-d-alanyl carrier protein ligase (Dcl) and a d-alanyl carrier protein (Dcp), encoded by the dltA and dltC genes, respectively (18, 44, 45, 70). The dltB and dltD genes encode other proteins required for the d-alanylation of LTAs. DltD is involved in selection of the Dcp carrier protein for ligation with d-alanine (19), whereas DltB is thought to be involved in d-alanyl-Dcp secretion (69). d-Alanine may be transferred from d-alanylated LTAs to wall-associated TAs by transacylation. For many human gram-positive bacterial pathogens, dlt operon inactivation has been shown to affect bacterial resistance to cationic AMPs and virulence. Indeed, Listeria monocytogenes, Bacillus anthracis, Staphylococcus aureus, Streptococcus pneumoniae, Streptococcus pyogenes, Lactobacillus reuteri, and group B streptococci harboring mutations in dlt genes all have a higher negative charge on the cell surface and are more susceptible to cationic AMPs of various origins (1, 34, 56, 58, 59, 77, 78, 89). The inactivation of dlt genes in these pathogenic bacterial species also decreases interactions with phagocytic and nonphagocytic cells (1, 13, 34, 78).The impact of Dlt proteins on cationic AMP resistance and virulence in insect bacterial pathogens has never before been studied, despite the major role of cationic AMPs in insect humoral immunity (9, 61). Insect bacterial pathogens also termed entomopathogenic bacteria are able to multiply in the insect hemocoel from small inocula (<10,000 viable cells) and produce fatal septicemia (8, 57). Entomopathogenic bacteria entering the hemolymph are targeted by an array of immune system mediators of both cellular and humoral reactions. The cellular response results in bacterial phagocytosis or encapsulation by circulating hemocytes, whereas the humoral response generates cationic AMPs (61). These peptides are small, inducible molecules produced in large amounts in hemolymph by the fat body (9, 26). They participate to the insect antimicrobial defense in a systemic response. Many AMP have been reported to cause damage in microbial membranes, which may ultimately lead to bacterial cell lysis (94).We investigated the role of the dlt operon in cationic AMP resistance and virulence in Bacillus cereus, a human opportunistic and insect facultative bacterial pathogen. B. cereus sensu stricto is a spore-forming gram-positive bacterium. The B. cereus sensu lato group of bacteria also includes the closely related insect pathogen Bacillus thuringiensis and the human pathogen B. anthracis. Genomic data have shown that B. thuringiensis and B. cereus have almost identical chromosomal genetic backgrounds (54, 55) but that B. thuringiensis carries a plasmid encoding entomopathogenic cytoplasmic crystalline δ-endotoxins (Cry proteins) specifically active against insect larvae upon ingestion (22, 23, 83). B. cereus can cause opportunistic food-borne gastroenteritis and local/systemic infections in immunocompromised humans (85). Both B. thuringiensis (with and without Cry toxins) and B. cereus strains are highly pathogenic when injected directly into the hemocoels of insect larvae, in which they cause lethal septicemia (46, 82, 86, 96). The occurrence, structure, and glycosylation of LTAs were studied for different Bacillus species, including B. cereus strains containing LTAs (built up of polyglycerol phosphate chains and hydrophobic anchors) and d-alanine (11, 50, 51, 62). Therefore, the presence of a dlt operon in the B. cereus 14579 genome suggests that the LTAs may be alanylated.We report here that the dlt operon of B. cereus is required for resistance to cationic AMPs of bacterial or insect origin. The dlt operon is required for full B. cereus virulence following bacterial injection into two lepidopteran insects, the caterpillar Spodoptera littoralis and the wax moth Galleria mellonella. We also detected the dlt operon in three gram-negative bacterial genera: Erwinia (Erwinia carotovora), Bordetella (Bordetella pertussis, Bordetella parapertussis, and Bordetella bronchiseptica), and Photorhabdus (the entomopathogenic bacterium Photorhabdus luminescens TT01).     

A Role for the Class A Penicillin-Binding Protein PonA2 in the Survival of Mycobacterium smegmatis under Conditions of Nonreplication

Class A penicillin-binding proteins (PBPs) are large, bifunctional proteins that are responsible for glycan chain assembly and peptide cross-linking of bacterial peptidoglycan. Bacteria in the genus Mycobacterium have been reported to have only two class A PBPs, PonA1 and PonA2, that are encoded in their genomes. We report here that the genomes of Mycobacterium smegmatis and other soil mycobacteria contain an additional gene encoding a third class A penicillin-binding protein, PonA3, which is a paralog of PonA2. Both the PonA2 and PonA3 proteins contain a penicillin-binding protein and serine/threonine protein kinase-associated (PASTA) domain that we propose may be involved in sensing the cell cycle and a C-terminal proline-rich region (PRR) that may have a role in protein-protein or protein-carbohydrate interactions. We show here that an M. smegmatis ΔponA2 mutant has an unusual antibiotic susceptibility profile, exhibits a spherical morphology and an altered cell surface in stationary phase, and is defective for stationary-phase survival and recovery from anaerobic culture. In contrast, a ΔponA3 mutant has no discernible phenotype under laboratory conditions. We demonstrate that PonA2 and PonA3 can bind penicillin and that PonA3 can partially substitute for PonA2 when ponA3 is expressed from a constitutive promoter on a multicopy plasmid. Our studies suggest that PonA2 is involved in adaptation to periods of nonreplication in response to starvation or anaerobiosis and that PonA3 may have a similar role. However, the regulation of PonA3 is likely different, suggesting that its importance could be related to stresses encountered in the environmental niches occupied by M. smegmatis and other soil-dwelling mycobacteria.The cell envelope of mycobacteria is a complex carbohydrate- and lipid-rich entity and is a major factor contributing to the success of these organisms as saprophytic and pathogenic bacteria (7, 8, 29, 35). The innermost layer of the cell envelope is a peptidoglycan (PG) composed of N-acylmuramic acid and N-acetylglucosamine with l-alanyl (or glycyl in the case of Mycobacterium leprae)-d-isoglutaminyl-meso-diaminopimelyl-d-alanyl-d-alanine pentapeptides attached to the muramic acid residues (13, 16, 54). While some of the muramyl residues are N acetylated, as they are in most other bacteria, a majority of the muramyl residues are N glycolylated (2, 37, 48, 49), a modification that confers lysozyme resistance (53) and also influences the innate immune response to mycobacterial cell walls (10). The pentapeptide chains of the mycobacterial PG can be modified by amidation, glycylation, or methylation, but the functional significance of these modifications is unknown (28, 31, 32, 38, 54).Approximately 80% of the pentapeptides in mycobacterial PG are cross-linked, and a majority of the links are between the carboxyl group of a penultimate d-Ala residue in a pentapeptide precursor and the amino group of the side chain d center of a meso-diaminopimelic acid (DAP) residue from an adjacent peptide (referred to as a 4-3 cross-link), while approximately one-third of the links are between the carboxyl group of the l center of a DAP residue of one peptide and the amino group of the side chain d center of the DAP residue in an adjacent peptide (referred to as a 3-3 cross-link) (17, 65). The 4-3 linkage is considered the “standard” linkage and is catalyzed by classical, penicillin-sensitive dd-transpeptidases, while the novel 3-3 linkage is thought to be catalyzed by the concerted action of dd-carboxypeptidases and novel ld-transpeptidases (31, 34, 39-41). The reasons why bacteria produce both 4-3 and 3-3 linkages are unknown. Some workers have suggested that the 3-3 linkages might reinforce the wall during times of stress and under nonreplicating conditions or stabilize complex cell envelopes (17, 50, 51, 55). In this regard, the high percentage of 3-3 linkages found in the PG of mycobacteria and their predominance in stationary-phase M. tuberculosis cells (31) suggest that these linkages may have an important role in maintaining cell envelope integrity during periods of growth and under nonreplicating conditions.The enzymes involved in peptidoglycan assembly, the penicillin-binding proteins (PBPs), have a triad sequence motif that forms the transpeptidation active site ([SxxK]——[S/YxN/C]——[K/H][T/S]G), which is the target of the β-lactam class of antibiotics (for a review, see reference 18). The PBPs have been grouped into several classes based on this motif, surrounding sequences, and other structural features (18). Of interest here are the class A PBPs, which are high-molecular-weight (HMW) proteins with both a transglycosylase domain (also called a non-penicillin-binding module [n-PB]) and a transpeptidase domain (also called a penicillin-binding module [PB]) (18). These proteins are tethered to the cytoplasmic membrane by a transmembrane helix with the catalytic domains facing the outside of the cell. Mycobacteria have been reported to have only two genes that encode class A PBPs, ponA1 and ponA2, which are annotated Rv0051 and Rv3682 in the sequence genome of M. tuberculosis H37Rv (9, 17). Previous studies that analyzed collections of transposon mutants to obtain clones with various phenotypes identified strains with insertions in these two genes. The phenotypes of these mutants have clearly shown that these PBPs play a complex role in mycobacterial physiology. One group of workers found a ponA1 mutant of M. smegmatis in a search for mutants with an altered dye-binding phenotype (an indicator of changes in the cell envelope) and showed that this slowly growing mutant was hypersusceptible to β-lactam antibiotics and had altered permeability (6). A ponA2 mutant of M. smegmatis was discovered in a screen for mutants defective for survival during long-term culture (25), while other workers isolated an M. tuberculosis ponA2 mutant in a screen for mutants sensitive to low pH (61). The same group of workers also showed that the M. tuberculosis mutant was more sensitive to heat, H₂O₂, and NO and was attenuated for persistence in the mouse model of inhalation tuberculosis (62). We previously identified an M. tuberculosis ponA2 mutant in a screen for mutants hypersusceptible to β-lactam antibiotics (14). All of these studies identified transposon mutants in searches for mutants with specific phenotypes, but there have been no direct genetic studies that have specifically examined the function of these PBPs in peptidoglycan metabolism.In this study we demonstrated that M. smegmatis has three class A PBPs. We show here that a newly recognized protein, which we designated PonA3, is a paralog of the PonA2 protein and is found only in certain environmental species of mycobacteria. We analyzed the phenotypes of M. smegmatis mutants with in-frame deletions of ponA2 and ponA3 singly and in combination to increase our understanding of the role that these PBPs play in mycobacterial peptidoglycan biology.     

Zif,the Zoocin A Immunity Factor,Is a FemABX-Like Immunity Protein with a Novel Mode of Action

Producer cell immunity to the streptococcolytic enzyme zoocin A, which is a d-alanyl-l-alanine endopeptidase, is due to Zif, the zoocin A immunity factor. Zif has high degrees of similarity to MurM and MurN (members of the FemABX family of proteins), which are responsible for the addition of amino acids to cross bridges during peptidoglycan synthesis in streptococci. In this study, purified peptidoglycans from strains with and without zif were compared to determine how Zif modifies the peptidoglycan layer to cause resistance to zoocin A. The peptidoglycan from each strain was hydrolyzed using the streptococcolytic phage lysin B30, and the resulting muropeptides were separated by reverse-phase high-pressure liquid chromatography, labeled with 4-sulfophenyl isothiocyanate, and analyzed by tandem mass spectrometry in the negative-ion mode. It was determined that Zif alters the peptidoglycan by increasing the proportion of cross bridges containing three l-alanines instead of two. This modification decreased binding of the recombinant target recognition domain of zoocin A to peptidoglycan. Zif-modified peptidoglycan also was less susceptible to hydrolysis by the recombinant catalytic domain of zoocin A. Thus, Zif is a novel FemABX-like immunity factor because it provides resistance to a bacteriolytic endopeptidase by lengthening the peptidoglycan cross bridge rather than by causing an amino acid substitution.During streptococcal peptidoglycan synthesis, monomer subunits are generated inside the cell, with nonribosomal peptidyl transferases responsible for the addition of amino acids onto the epsilon amino group of lysine in the subunits. These nonribosomal peptidyl transferases are part of the FemABX family of proteins, some of which have been implicated in penicillin resistance (5, 26). In Streptococcus pneumoniae peptidoglycan synthesis, MurM attaches either an l-alanine or an l-serine to the epsilon amino group of lysine, and MurN then adds an l-alanine (11, 26).Zoocin A is a d-alanyl-l-alanine endopeptidase produced by Streptococcus equi subsp. zooepidemicus 4881 that hydrolyzes peptidoglycan cross bridges of susceptible streptococci (12). Zoocin A has two functional domains (18). The N-terminal catalytic domain (CAT) has high degrees of similarity to several other bacteriolytic endopeptidases, including the staphylolytic enzyme lysostaphin. The C-terminal target recognition domain (TRD), which facilitates binding of the enzyme to peptidoglycan (1), has very little similarity to any characterized conserved domain.Producer cell immunity to zoocin A is due to zif (zoocin A immunity factor), which is adjacent to zooA on the chromosome and is transcribed divergently (4). Zif has high degrees of similarity to MurM and MurN and also to the lysostaphin resistance protein and other FemABX-like immunity proteins (23). Previously characterized FemABX-like immunity proteins provide resistance to peptidoglycan cross-bridge hydrolases by inserting an amino acid different from those specified by the normal FemABX-like proteins (6, 9, 15, 25), whereas Zif does not (4). It has been shown previously that Zif-specified resistance to zoocin A is an intrinsic characteristic of the peptidoglycan layer (12). Therefore, Zif must modify the peptidoglycan layer in a novel way that provides resistance to zoocin A. In the present study, Zif was shown to insert an additional l-alanine into the peptidoglycan cross bridges, which inhibited both binding of the zoocin A TRD and the ability of the zoocin A CAT to hydrolyze the cross bridge.     

Identification and Characterization of gshA,a Gene Encoding the Glutamate-Cysteine Ligase in the Halophilic Archaeon Haloferax volcanii

Halophilic archaea were found to contain in their cytoplasm millimolar concentrations of γ-glutamylcysteine (γGC) instead of glutathione. Previous analysis of the genome sequence of the archaeon Halobacterium sp. strain NRC-1 has indicated the presence of a sequence homologous to sequences known to encode the glutamate-cysteine ligase GshA. We report here the identification of the gshA gene in the extremely halophilic archaeon Haloferax volcanii and show that H. volcanii gshA directs in vivo the synthesis and accumulation of γGC. We also show that the H. volcanii gene when expressed in an Escherichia coli strain lacking functional GshA is able to restore synthesis of glutathione.Many organisms contain millimolar concentrations of low-molecular-weight thiol compounds that participate in a number of important biological functions involving thiol-disulfide exchanges (7). In particular, they serve to maintain an intracellular reducing environment, to provide reducing power for key reductive enzymes, to combat the effects of oxidative and disulfide stress, and to detoxify xenobiotic compounds (7). Glutathione (GSH), a cysteine-containing tripeptide, l-γ-glutamyl-l-cysteinylglycine, is the best-characterized low-molecular-weight thiol (7, 19, 21). GSH is made in a highly conserved two-step ATP-dependent process by two unrelated peptide bond-forming enzymes (3, 21). The γ-carboxyl group of l-glutamate and the amino group of l-cysteine are ligated by the enzyme glutamylcysteine (GC) ligase EC 6.3.2.2 (GshA, encoded by gshA), which is then condensed with glycine in a reaction catalyzed by GSH synthetase (GshB, encoded by gshB) to form GSH (10, 38). GSH is found primarily in gram-negative bacteria and eukaryotes and only rarely in gram-positive bacteria (26). Fahey and coworkers showed that GSH is absent from the high-GC gram-positive actinomycetes which produce, as the major low-molecular-weight thiol, mycothiol, 1-d-myo-inosityl-2-(N-acetyl-l-cysteinyl)-amido-2-deoxy-α-d-glucopyranoside (13, 26-28, 35). GSH is also absent in Archaea. In Pyrococcus furiosus, coenzyme A SH (CoASH) is the main thiol (11), whereas in Halobacterium salinarum, γGC is the predominant thiol and the organism possesses bis-γGC reductase activity (30, 36). Similarly, Leuconostoc kimchi and Leuconostoc mesenteroides, gram-positive lactic acid bacterial species, were recently found to contain γGC rather than GSH (15). To date, these are the sole procaryotic species reported to naturally produce γGC but not GSH (6, 30). In this report, we describe the identification of the gshA gene in the extremely halophilic archaeon Haloferax volcanii. Copley and Dhillon (6) previously identified, using bioinformatic tools, an open reading frame (ORF) (gene VNG1397C) in Halobacterium sp. strain NRC-1 with limited sequence relatedness to known GshA proteins (6). However, no genetic or biochemical evidence was presented to substantiate their conclusion. Here, we show that Haloferax volcanii strain DS2 (1, 25) contains an ORF that directs in vivo the synthesis and accumulation of γGC. We also show that the H. volcanii ORF, when expressed in Escherichia coli lacking functional GshA, is able to restore synthesis of GSH.