Generation of Single-Copy Transposon Insertions in Clostridium perfringens by Electroporation of Phage Mu DNA Transposition Complexes

Transposon mutagenesis is a tool that is widely used for the identification of genes involved in the virulence of bacteria. Until now, transposon mutagenesis in Clostridium perfringens has been restricted to the use of Tn916-based methods with laboratory reference strains. This system yields primarily multiple transposon insertions in a single genome, thus compromising its use for the identification of virulence genes. The current study describes a new protocol for transposon mutagenesis in C. perfringens, which is based on the bacteriophage Mu transposition system. The protocol was successfully used to generate a single-insertion mutant library both for a laboratory strain and for a field isolate. Thus, it can be used as a tool in large-scale screening to identify virulence genes of C. perfringens.Clostridium perfringens is a gram-positive, anaerobic bacterium that forms heat-resistant spores. It is widespread in the soil and commonly found in the gastrointestinal tract of mammals. It has been implicated in several medical conditions in humans, ranging from mild food poisoning to necrotic enteritis and gas gangrene. C. perfringens strains also cause a variety of important diseases in domestic animals, including several enteric syndromes, such as enterotoxemia in cattle, sheep, and pigs, necrotic enteritis in poultry, and typhocolitis in equines (17, 40).Understanding the pathogenesis of these infections is of crucial importance for the development of new tools for the prevention and control of C. perfringens-related diseases. Genetic modification is a valuable approach to identify new virulence factors and to study their role in the pathogenesis of C. perfringens.Since the 1980s, several tools for manipulation of C. perfringens at the molecular level have been developed (1, 5, 28, 35, 38). Among these tools, transposon mutagenesis is a method that is widely used for identification of virulence genes. Until now, the only reproducible method for transposon mutagenesis in C. perfringens was based on Tn916, a tetracycline resistance-encoding conjugative transposon originally isolated from Enterococcus faecalis (10, 11, 13). Tn916 has been used extensively for transposon mutagenesis due to its broad host range and has been proven to be valuable for the identification of genes in C. perfringens (3, 7, 22). Nevertheless, this method has major disadvantages; multiple Tn916 insertion events occur with an incidence of 65% to 75%, severely complicating identification of genes responsible for phenotype changes (3, 7, 19). Furthermore, Tn916 is still active after insertion, resulting in unstable mutants (6, 39, 42). To our knowledge, generation of Tn916-derived transposon mutants in C. perfringens field strains has never been described.Although a variety of transposon mutagenesis methods are available for gram-positive bacteria (4, 37, 41, 43), the inherent species nonspecificity, as well as the lack of mobility of the integrated transposon, makes the bacteriophage Mu-based transposon delivery system a system of choice for a variety of species (16, 26, 46). The Mu transposition approach includes in vitro assembly of a complex between the transposon DNA and the transposase enzyme, the transpososome, followed by delivery of the transpososome into the recipient cells. Once inside a cell, the Mu transpososome becomes activated in the presence of divalent cations, resulting in genomic integration of the delivered transposon. The bacteriophage Mu transposition system is also functional in vitro (15, 32, 33), in contrast to the Tn916 mutagenesis strategy, which is restricted to transposon mobilization in vivo following conjugation or electroporation. Under the optimal in vitro conditions, the Mu transposition reaction requires only the MuA transposase, a mini-Mu transposon, and target DNA as macromolecular components (15).In this study, a novel protocol is described for transposon mutagenesis in C. perfringens that exploits the bacteriophage Mu transposition system. To our knowledge, this report is the first report describing a mutagenesis method generating single-insertion transposon mutants in laboratory and field isolates of C. perfringens. This method is important for the identification of C. perfringens virulence factors involved in the numerous diseases caused by this bacterium.     

Base Flipping in V(D)J Recombination: Insights into the Mechanism of Hairpin Formation,the 12/23 Rule,and the Coordination of Double-Strand Breaks

Tn5 transposase cleaves the transposon end using a hairpin intermediate on the transposon end. This involves a flipped base that is stacked against a tryptophan residue in the protein. However, many other members of the cut-and-paste transposase family, including the RAG1 protein, produce a hairpin on the flanking DNA. We have investigated the reversed polarity of the reaction for RAG recombination. Although the RAG proteins appear to employ a base-flipping mechanism using aromatic residues, the putatively flipped base is not at the expected location and does not appear to stack against any of the said aromatic residues. We propose an alternative model in which a flipped base is accommodated in a nonspecific pocket or cleft within the recombinase. This is consistent with the location of the flipped base at position −1 in the coding flank, which can be occupied by purine or pyrimidine bases that would be difficult to stabilize using a single, highly specific, interaction. Finally, during this work we noticed that the putative base-flipping events on either side of the 12/23 recombination signal sequence paired complex are coupled to the nicking steps and serve to coordinate the double-strand breaks on either side of the complex.Antibody and T-cell receptor (TCR) diversity is generated by V(D)J recombination initiated by the RAG proteins, RAG1 and RAG2. The recombination signal sequences (RSSs), where recombination takes place, have a distinctive arrangement resembling transposon ends. The relationship between V(D)J recombination and transposition was established beyond doubt by the discovery of RAG-mediated transposition and by the identification of a triad of conserved active-site residues. This evidence placed RAG1 firmly within the family of transposases and retroviral integrases that have a characteristic DDE triad of amino acid residues that coordinate catalytic metal ions in the active site (1, 26, 30, 35, 39, 46). Later, the Transib family of transposons was identified as the likely ancestral group of RAG1 (33).In V(D)J recombination, the RAG proteins excise the DNA between a pair of RSSs. This fragment is the equivalent of an excised transposon, and it takes no further part in the canonical V(D)J recombination reaction. Instead, the variable regions of the genes encoding antibodies and TCR are created by the imprecise rejoining of the flanking DNA, referred to as the “coding flank.” A key feature of the cleaved coding flanks is that they have covalently closed hairpin ends. The asymmetric resolution of these hairpins contributes to the diversification of the coding sequences during rejoining. The hairpins themselves arise as a consequence of the molecular mechanism RAG-mediated RSS cleavage.The crystal structure for the catalytic core of the human immunodeficiency virus type 1 integrase protein revealed a structural fold shared in common with RNase H and the Holliday junction resolving enzyme RuvC (22). RNase H and RuvC monomers each perform a simple nicking reaction that requires a single phosphoryl transfer event. Cut-and-paste transposition, which requires at least three phosphoryl transfer steps at each transposon end, therefore presents a mechanistic challenge. One solution to this challenge was revealed by the discovery of the DNA-hairpin cleavage-intermediate in V(D)J recombination and Tn10 transposition (Fig. ​(Fig.1)1) (34, 57). However, it is interesting to note that the existence of this intermediate was first suggested by Coen and colleagues on the basis of the genomic scars produced by excision of the hAT family transposon Tam3 in Antirrhinum majus (14).Open in a separate windowFIG. 1.Hairpin-processing reactions of opposite polarity. Most prokaryotic and eukaryotic members of the DDE family have hairpin intermediates of opposite polarity. In this paper, we refer to the two strands of DNA as “first strand” or “second strand” depending on the order of cleavage. The first strand therefore corresponds to the transferred and nontransferred strands of the prokaryotic and eukaryotic elements, respectively. Scissile phosphates are in red. The transposon end and RSS are shown as gray triangles. (Left panel) In Tn5 and Tn10, the first step of the reaction is a nick on the bottom (first) strand that exposes the 3′-OH at the end of the transposon. The second strand is cleaved by a direct transesterification reaction, which generates a “proximal-hairpin” intermediate on the transposon end (5, 34). Resolution by a nick at the tip of the hairpin yields a blunt transposon end. Distortion of the DNA helix can be detected by permanganate sensitivity of the T−1 and T+2 residues on the second strand. The insert shows the crystal structure of the Tn5 transposon end, highlighting the flipped base at position +2 (19). Two tryptophan residues are also shown. One acts as a “wedge” or “probe” residue inserted into the DNA helix, while the other provides stacking interactions that stabilize the flipped base. The W323 probe residue resides within the catalytic core close to the DDE residue E326, whereas the W298 stacking residue is in the inserted subdomain (see text for further details). Base flipping takes place after the first nick and is probably maintained for all subsequent steps, including integration (3, 7). (Right panel) In V(D)J recombination and the hAT family of transposons, the polarity of the reaction is reversed. The first nick is on the top strand providing a 3′-OH group on the flanking DNA (53, 71, 77). Transesterification yields a “distal hairpin” intermediate on the flanking DNA that is processed by the host. The positions of relevant thymidine residues in our substrates are indicated.All DDE family transposases, including RAG1, cut the DNA to expose the 3′-OH at the end of the element (or RSS). However, the fate of the opposite strand and the order of strand cleavage events vary within the group (reviewed in references13, 18, and 55). Some enzymes, such as the retroviral integrases and the bacteriophage Mu transposase, nick and integrate the 3′-OH directly without second-strand cleavage. The cut-and-paste transposons, which cleave both strands of DNA, can be divided into two groups. With some notable exceptions such as the piggyBac element, most prokaryotic family members cleave the bottom strand of the recombination site first, whereas most eukaryotic members cleave the top strand first (8, 10, 20, 41, 47, 48, 77). For those family members with a hairpin mechanism, the inverted polarity of the first step dictates the reversal of all subsequent steps (Fig. ​(Fig.1).1). In consequence, most eukaryotic members of the family can achieve transposition with one less phosphoryl transfer reaction than the prokaryotic members, which are obliged to resolve the hairpin intermediate. The eukaryotic members can simply release the hairpin ends or, as in the case of RAG, hand them on to host factors for further processing (40).Insight into the hairpin mechanism was provided by a crystal structure for the Tn5 transpososome, in which the penultimate base on the second, nontransferred, strand was flipped from the helix and stacked against a tryptophan side chain in the protein (Fig. ​(Fig.1)1) (19). The flipped base seemed to provide the steric freedom that is presumed to be required for making and resolving the hairpin intermediate. Two groups searched for a residue in RAG1 that performs a function equivalent to the stacking tryptophan in the Tn5 transposase (27, 45). This work identified several candidate residues on the basis of their respective mechanistic defects and their rescue by modified DNA substrates.Here we have further assessed the candidate stacking residues using biochemical techniques previously used to study the dynamics of base flipping in Tn5 and Tn10 transposition (6, 7). We have identified a distortion at position −1 of the V(D)J coding flank DNA. It is introduced after the first nick at the RSS and is therefore reminiscent of the flipped base at the end of Tn5. The distortion is perfectly correlated with the ability of wild-type and mutant RAG-RSS complexes to perform the hairpin step of the reaction. We conclude that this base is probably equivalent to the flipped base in Tn5. However, none of the candidate aromatic residues seems to fulfill the function of the putative stacking tryptophan residue. We therefore propose a model in which base flipping in RAG recombination is significantly different from that in Tn5 transposition.Canonical V(D)J recombination occurs within a 12/23 RSS paired complex (24, 36, 60, 72, 73). This restriction is known as the 12/23 rule. More recently a further restriction, the so-called “beyond 12/23” (B12/23) rule has been proposed to explain the exclusion of direct Vβ-to-Jβ joining in the TCR β region, despite the presence of appropriately oriented pairs of 12 and 23 RSSs (4, 21, 31, 32).Little is known of the mechanisms that enforce the 12/23 rule or coordinate cleavage on either side of the complex. However, during this work, we observed that the coding flank distortion was coupled on either side of a 12/23 RSS paired complex: the distortion of a nicked coding flank is suppressed by an unnicked partner. We present a model and discuss the biological significance of this conformational coupling and its relevance to the B12/23 rule.     

The Genome of the Amoeba Symbiont “Candidatus Amoebophilus asiaticus” Reveals Common Mechanisms for Host Cell Interaction among Amoeba-Associated Bacteria

Protozoa play host for many intracellular bacteria and are important for the adaptation of pathogenic bacteria to eukaryotic cells. We analyzed the genome sequence of “Candidatus Amoebophilus asiaticus,” an obligate intracellular amoeba symbiont belonging to the Bacteroidetes. The genome has a size of 1.89 Mbp, encodes 1,557 proteins, and shows massive proliferation of IS elements (24% of all genes), although the genome seems to be evolutionarily relatively stable. The genome does not encode pathways for de novo biosynthesis of cofactors, nucleotides, and almost all amino acids. “Ca. Amoebophilus asiaticus” encodes a variety of proteins with predicted importance for host cell interaction; in particular, an arsenal of proteins with eukaryotic domains, including ankyrin-, TPR/SEL1-, and leucine-rich repeats, which is hitherto unmatched among prokaryotes, is remarkable. Unexpectedly, 26 proteins that can interfere with the host ubiquitin system were identified in the genome. These proteins include F- and U-box domain proteins and two ubiquitin-specific proteases of the CA clan C19 family, representing the first prokaryotic members of this protein family. Consequently, interference with the host ubiquitin system is an important host cell interaction mechanism of “Ca. Amoebophilus asiaticus”. More generally, we show that the eukaryotic domains identified in “Ca. Amoebophilus asiaticus” are also significantly enriched in the genomes of other amoeba-associated bacteria (including chlamydiae, Legionella pneumophila, Rickettsia bellii, Francisella tularensis, and Mycobacterium avium). This indicates that phylogenetically and ecologically diverse bacteria which thrive inside amoebae exploit common mechanisms for interaction with their hosts, and it provides further evidence for the role of amoebae as training grounds for bacterial pathogens of humans.Free-living amoebae, such as Acanthamoeba spp., are ubiquitous protozoa which can be found in such diverse habitats as soil, marine water, and freshwater and in many engineered environments (62, 100). They are important predators of prokaryotic and eukaryotic microorganisms, thereby having great influence on microbial community composition, soil mineralization, plant growth, and nutrient cycles (14, 100). Interestingly, many well-known pathogens of humans are able to infect, survive, and multiply within amoebae (39, 51). These protozoa can thus serve as reservoirs and vectors for the transmission of pathogenic bacteria to humans, as demonstrated for L. pneumophila and Mycobacterium avium (2, 115). It is also increasingly being recognized that protozoa are important for the adaptation of (pathogenic) bacteria to higher eukaryotic cells as a niche for growth (2, 24, 42, 78, 89).In addition to the many recognized transient associations between amoeba and pathogens, stable and obligate relationships between bacteria and amoebae also were described for members of the Alphaproteobacteria (11, 34, 48), the Betaproteobacteria (49), the Bacteroidetes (50), and the Chlamydiae (4, 12, 35, 52). These obligate amoeba symbionts show a worldwide distribution, since phylogenetically highly similar strains were found in amoeba isolates from geographically distant sources (51, 107). The phylogenetic diversity and the different lifestyles of these obligate intracellular bacteria—some are located directly in the host cell cytoplasm (11, 34, 48-50, 52), while others are enclosed in host-derived vacuoles (4, 35, 44)—suggest fundamentally different mechanisms of host cell interaction. However, with the exception of chlamydia-related amoeba symbionts (37, 46, 47), our knowledge of the biology of obligate intracellular symbionts of amoebae is still scarce.Comparative genomics has been extremely helpful for the analysis of intracellular bacteria. Numerous genome sequences from the Alpha- and Gammaproteobacteria and the Chlamydiae are available and have contributed significantly to our understanding of genome evolution, the biology of intracellular bacteria, and the interactions with their host cells (24, 26, 46, 79, 82). In this study, we determined and analyzed the complete genome sequence of “Candidatus Amoebophilus asiaticus” strain 5a2 in order to gain novel insights into its biology. “Ca. Amoebophilus asiaticus” is a Gram-negative, obligate intracellular amoeba symbiont belonging to the Bacteroidetes which has been discovered within an amoeba isolated from lake sediment (107). “Ca. Amoebophilus asiaticus” shows highest 16S rRNA similarity to “Candidatus Cardinium hertigii,” an obligate intracellular parasite of arthropods able to manipulate the reproduction of its hosts (131). According to 16S rRNA trees, both organisms are members of a monophyletic group within the phylogenetically diverse phylum Bacteroidetes, consisting only of symbionts and sequences which were directly retrieved from corals (113). Among members of the Bacteroidetes, the genome sequences of only three symbionts, which are only distantly related (75 to 80% 16S rRNA sequence similarity) to “Ca. Amoebophilus asiaticus,” have been determined to date: two strains of “Candidatus Sulcia muelleri,” a symbiont of sharpshooters, and “Azobacteroides pseudotrichonymphae,” a symbiont of an anaerobic termite gut ciliate (45, 72, 74, 127).The genome of “Ca. Amoebophilus asiaticus” is only moderately reduced in size compared to those of many other obligate intracellular bacteria (75, 123), but nevertheless, its biosynthetic capabilities are extremely limited. A large fraction of the genome consists of IS elements and an unparalleled high number of proteins with eukaryotic domains, such as ankyrin repeats, TPR/SEL1 repeats, leucine-rich repeats, and domains from the eukaryotic ubiquitin system, all of them most likely important for host cell interaction. Feature enrichment analysis across a nonredundant data set of all bacterial genomes showed that these domains are enriched in the genomes of bacteria (including several pathogens of humans) known to be able to infect amoebae, providing further evidence for an important role of amoebae in the evolution of mechanisms for host cell interaction in intracellular bacteria.     

Environmental Factors Shape Sediment Anammox Bacterial Communities in Hypernutrified Jiaozhou Bay,China

Bacterial anaerobic ammonium oxidation (anammox) is an important process in the marine nitrogen cycle. Because ongoing eutrophication of coastal bays contributes significantly to the formation of low-oxygen zones, monitoring of the anammox bacterial community offers a unique opportunity for assessment of anthropogenic perturbations in these environments. The current study used targeting of 16S rRNA and hzo genes to characterize the composition and structure of the anammox bacterial community in the sediments of the eutrophic Jiaozhou Bay, thereby unraveling their diversity, abundance, and distribution. Abundance and distribution of hzo genes revealed a greater taxonomic diversity in Jiaozhou Bay, including several novel clades of anammox bacteria. In contrast, the targeting of 16S rRNA genes verified the presence of only “Candidatus Scalindua,” albeit with a high microdiversity. The genus “Ca. Scalindua” comprised the apparent majority of active sediment anammox bacteria. Multivariate statistical analyses indicated a heterogeneous distribution of the anammox bacterial assemblages in Jiaozhou Bay. Of all environmental parameters investigated, sediment organic C/organic N (OrgC/OrgN), nitrite concentration, and sediment median grain size were found to impact the composition, structure, and distribution of the sediment anammox bacterial community. Analysis of Pearson correlations between environmental factors and abundance of 16S rRNA and hzo genes as determined by fluorescent real-time PCR suggests that the local nitrite concentration is the key regulator of the abundance of anammox bacteria in Jiaozhou Bay sediments.Anaerobic ammonium oxidation (anammox, NH₄⁺ + NO₂⁻ → N₂ + 2H₂O) was proposed as a missing N transformation pathway decades ago. It was found 20 years later to be mediated by bacteria in artificial environments, such as anaerobic wastewater processing systems (see reference 32 and references therein). Anammox in natural environments was found even more recently, mainly in O₂-limited environments such as marine sediments (28, 51, 54, 67, 69) and hypoxic or anoxic waters (10, 25, 39-42). Because anammox may remove as much as 30 to 70% of fixed N from the oceans (3, 9, 64), this process is potentially as important as denitrification for N loss and bioremediation (41, 42, 73). These findings have significantly changed our understanding of the budget of the marine and global N cycles as well as involved pathways and their evolution (24, 32, 35, 72). Studies indicate variable anammox contributions to local or regional N loss (41, 42, 73), probably due to distinct environmental conditions that may influence the composition, abundance, and distribution of the anammox bacteria. However, the interactions of anammox bacteria with their environment are still poorly understood.The chemolithoautotrophic anammox bacteria (64, 66) comprise the new Brocadiaceae family in the Planctomycetales, for which five Candidatus genera have been described (see references 32 and 37 and references therein): “Candidatus Kuenenia,” “Candidatus Brocadia,” “Candidatus Scalindua,” “Candidatus Anammoxoglobus,” and “Candidatus Jettenia.” Due to the difficulty of cultivation and isolation, anammox bacteria are not yet in pure culture. Molecular detection by using DNA probes or PCR primers targeting the anammox bacterial 16S rRNA genes has thus been the main approach for the detection of anammox bacteria and community analyses (58). However, these studies revealed unexpected target sequence diversity and led to the realization that due to biased coverage and specificity of most of the PCR primers (2, 8), the in situ diversity of anammox bacteria was likely missed. Thus, the use of additional marker genes for phylogenetic analysis was suggested in hopes of better capturing the diversity of this environmentally important group of bacteria. By analogy to molecular ecological studies of aerobic ammonia oxidizers, most recent studies have attempted to include anammox bacterium-specific functional genes. All anammox bacteria employ hydrazine oxidoreductase (HZO) (= [Hzo]₃) to oxidize hydrazine to N₂ as the main source for a useable reductant, which enables them to generate proton-motive force for energy production (32, 36, 65). Phylogenetic analyses of Hzo protein sequences revealed three sequence clusters, of which the cladistic structure of cluster 1 is in agreement with the anammox bacterial 16S rRNA gene phylogeny (57). The hzo genes have emerged as an alternative phylogenetic and functional marker for characterization of anammox bacterial communities (43, 44, 57), allowing the 16S rRNA gene-based investigation methods to be corroborated and improved.The contribution of anammox to the removal of fixed N is highly variable in estuarine and coastal sediments (50). For instance, anammox may be an important pathway for the removal of excess N (23) or nearly negligible (48, 54, 67, 68). This difference may be attributable to a difference in the structure and composition of anammox bacterial communities, in particular how the abundance of individual cohorts depends on particular environmental conditions. Anthropogenic disturbance with variable source and intensity of eutrophication and pollution may further complicate the anammox bacterium-environment relationship.Jiaozhou Bay is a large semienclosed water body of the temperate Yellow Sea in China. Eutrophication has become its most serious environmental problem, along with red tides (harmful algal blooms), species loss, and contamination with toxic chemicals and harmful microbes (14, 15, 21, 61, 71). Due to different sources of pollution and various levels of eutrophication across Jiaozhou Bay (mariculture, municipal and industrial wastewater, crude oil shipyard, etc.), a wide spectrum of environmental conditions may contribute to a widely varying community structure of anammox bacteria. This study used both 16S rRNA and hzo genes as targets to measure their abundance, diversity, and spatial distribution and assess the response of the resident anammox bacterial community to different environmental conditions. Environmental factors with potential for regulating the sediment anammox microbiota are discussed.     

Cytoskeletal Asymmetrical Dumbbell Structure of a Gliding Mycoplasma,Mycoplasma gallisepticum,Revealed by Negative-Staining Electron Microscopy

Several mycoplasma species feature a membrane protrusion at a cell pole, and unknown mechanisms provide gliding motility in the direction of the pole defined by the protrusion. Mycoplasma gallisepticum, an avian pathogen, is known to form a membrane protrusion composed of bleb and infrableb and to glide. Here, we analyzed the gliding motility of M. gallisepticum cells in detail. They glided in the direction of the bleb at an average speed of 0.4 μm/s and remained attached around the bleb to a glass surface, suggesting that the gliding mechanism is similar to that of a related species, Mycoplasma pneumoniae. Next, to elucidate the cytoskeletal structure of M. gallisepticum, we stripped the envelopes by treatment with Triton X-100 under various conditions and observed the remaining structure by negative-staining transmission electron microscopy. A unique cytoskeletal structure, about 300 nm long and 100 nm wide, was found in the bleb and infrableb. The structure, resembling an asymmetrical dumbbell, is composed of five major parts from the distal end: a cap, a small oval, a rod, a large oval, and a bowl. Sonication likely divided the asymmetrical dumbbell into a core and other structures. The cytoskeletal structures of M. gallisepticum were compared with those of M. pneumoniae in detail, and the possible protein components of these structures were considered.Mycoplasmas are commensal and occasionally pathogenic bacteria that lack a peptidoglycan layer (50). Several species feature a membrane protrusion at a pole; for Mycoplasma mobile, this protrusion is called the head, and for Mycoplasma pneumoniae, it is called the attachment organelle (25, 34-37, 52, 54, 58). These species bind to solid surfaces, such as glass and animal cell surfaces, and exhibit gliding motility in the direction of the protrusion (34-37). This motility is believed to be essential for the mycoplasmas'' pathogenicity (4, 22, 27, 36). Recently, the proteins directly involved in the gliding mechanisms of mycoplasmas were identified and were found to have no similarities to those of known motility systems, including bacterial flagellum, pilus, and slime motility systems (25, 34-37).Mycoplasma gallisepticum is an avian pathogen that causes serious damage to the production of eggs for human consumption (50). The cells are pear-shaped and have a membrane protrusion, consisting of the so-called bleb and infrableb (29), and gliding motility (8, 14, 22). Their putative cytoskeletal structures may maintain this characteristic morphology because M. gallisepticum, like other mycoplasma species, does not have a cell wall (50). In sectioning electron microscopy (EM) studies of M. gallisepticum, an intracellular electron-dense structure in the bleb and infrableb was observed, suggesting the existence of a cytoskeletal structure (7, 24, 29, 37, 58). Recently, the existence of such a structure has been confirmed by scanning EM of the structure remaining after Triton X-100 extraction (13), although the details are still unclear.A human pathogen, M. pneumoniae, has a rod-shaped cytoskeletal structure in the attachment organelle (9, 15, 16, 31, 37, 57). M. gallisepticum is related to M. pneumoniae (63, 64), as represented by 90.3% identity between the 16S rRNA sequences, and it has some open reading frames (ORFs) homologous to the component proteins of the cytoskeletal structures of M. pneumoniae (6, 17, 48). Therefore, the cytoskeletal structures of M. gallisepticum are expected to be similar to those of M. pneumoniae, as scanning EM images also suggest (13).The fastest-gliding species, M. mobile, is more distantly related to M. gallisepticum; it has novel cytoskeletal structures that have been analyzed through negative-staining transmission EM after extraction by Triton X-100 with image averaging (45). This method of transmission EM following Triton X-100 extraction clearly showed a cytoskeletal “jellyfish” structure. In this structure, a solid oval “bell,” about 235 nm wide and 155 nm long, is filled with a 12-nm hexagonal lattice. Connected to this bell structure are dozens of flexible “tentacles” that are covered with particles 20 nm in diameter at intervals of about 30 nm. The particles appear to have 180° rotational symmetry and a dimple at the center. The involvement of this cytoskeletal structure in the gliding mechanism was suggested by its cellular localization and by analyses of mutants lacking proteins essential for gliding.In the present study, we applied this method to M. gallisepticum and analyzed its unique cytoskeletal structure, and we then compared it with that of M. pneumoniae.     

A Novel Dehalobacter Species Is Involved in Extensive 4,5,6,7-Tetrachlorophthalide Dechlorination

The purpose of this study was the enrichment and phylogenetic identification of bacteria that dechlorinate 4,5,6,7-tetrachlorophthalide (commercially designated “fthalide”), an effective fungicide for rice blast disease. Sequential transfer culture of a paddy soil with lactate and fthalide produced a soil-free enrichment culture (designated the “KFL culture”) that dechlorinated fthalide by using hydrogen, which is produced from lactate. Phylogenetic analysis based on 16S rRNA genes revealed the dominance of two novel phylotypes of the genus Dehalobacter (FTH1 and FTH2) in the KFL culture. FTH1 and FTH2 disappeared during culture transfer in medium without fthalide and increased in abundance with the dechlorination of fthalide, indicating their growth dependence on the dechlorination of fthalide. Dehalobacter restrictus TEA is their closest relative, with 97.5% and 97.3% 16S rRNA gene similarities to FTH1 and FTH2, respectively.4,5,6,7-Tetrachlorophthalide (commercially designated “fthalide”) is an effective fungicide for rice blast disease, which inhibits melanin biosynthesis and the formation of the mature appressorial cells of the rice blast pathogen on the host plant (5, 16). Fthalide has been reported to be reductively dechlorinated in soil (16) and compost (28), although its fates in paddy soil and the fthalide-dechlorinating bacteria are unknown. Besides fthalide, polychlorinated aromatic compounds are known to be reductively dechlorinated by the bacteria of several phyla. Six strains of Desulfitobacterium spp. of the phylum Firmicutes (2, 3, 6, 10, 23, 29) and Desulfomonile tiedjei DCB-1 of the phylum Proteobacteria (21) can dechlorinate polychlorinated phenols. Three strains of the phylum Chloroflexi can dechlorinate a variety of compounds, including polychlorinated phenols, benzenes, biphenyls, or dibenzo-p-dioxins: Dehalococcoides ethenogenes 195 (9, 19), Dehalococcoides sp. strain CBDB1 (1, 4), and strain DF-1 of Chloroflexi, collectively called the “o-17/DF-1 group” (18). Dehalococcoides spp. utilize hydrogen as an electron donor and acetate as a carbon source for growth coupled to the reductive dechlorination of chlorinated compounds (1, 12, 13, 19, 26). In contrast, Desulfitobacterium spp. can dechlorinate chlorinated compounds not only with hydrogen, but also organic acids, such as formate, pyruvate, lactate, or butyrate (3, 10, 23). Strain DF-1 can utilize hydrogen and formate for the dechlorination of polychlorinated biphenyls (PCBs) (18).In this study, bacteria that dechlorinate fthalide were enriched from a paddy soil with sequentially transferred cultures using a soil-free medium supplemented with single organic acids. Acetate, formate, lactate, and butyrate were used in this study because they are frequently used in the enrichment of dechlorinators and release hydrogen at different concentrations (8, 11, 14). Fthalide-dechlorinating bacteria in the enriched culture were phylogenetically identified based on the 16S rRNA gene with PCR-denaturing gradient gel electrophoresis (DGGE), a 16S rRNA gene clone library, and quantitative real-time PCR (qPCR).     

Cultivation of Fastidious Bacteria by Viability Staining and Micromanipulation in a Soil Substrate Membrane System

Soil substrate membrane systems allow for microcultivation of fastidious soil bacteria as mixed microbial communities. We isolated established microcolonies from these membranes by using fluorescence viability staining and micromanipulation. This approach facilitated the recovery of diverse, novel isolates, including the recalcitrant bacterium Leifsonia xyli, a plant pathogen that has never been isolated outside the host.The majority of bacterial species have never been recovered in the laboratory (1, 14, 19, 24). In the last decade, novel cultivation approaches have successfully been used to recover “unculturables” from a diverse range of divisions (23, 25, 29). Most strategies have targeted marine environments (4, 23, 25, 32), but soil offers the potential for the investigation of vast numbers of undescribed species (20, 29). Rapid advances have been made toward culturing soil bacteria by reformulating and diluting traditional media, extending incubation times, and using alternative gelling agents (8, 21, 29).The soil substrate membrane system (SSMS) is a diffusion chamber approach that uses extracts from the soil of interest as the growth substrate, thereby mimicking the environment under investigation (12). The SSMS enriches for slow-growing oligophiles, a proportion of which are subsequently capable of growing on complex media (23, 25, 27, 30, 32). However, the SSMS results in mixed microbial communities, with the consequent difficulty in isolation of individual microcolonies for further characterization (10).Micromanipulation has been widely used for the isolation of specific cell morphotypes for downstream applications in molecular diagnostics or proteomics (5, 15). This simple technology offers the opportunity to select established microcolonies of a specific morphotype from the SSMS when combined with fluorescence visualization (3, 11). Here, we have combined the SSMS, fluorescence viability staining, and advanced micromanipulation for targeted isolation of viable, microcolony-forming soil bacteria.     

Detection and Quantification of Dehalogenimonas and “Dehalococcoides” Populations via PCR-Based Protocols Targeting 16S rRNA Genes

Members of the haloalkane dechlorinating genus Dehalogenimonas are distantly related to “Dehalococcoides” but share high homology in some variable regions of their 16S rRNA gene sequences. In this study, primers and PCR protocols intended to uniquely target Dehalococcoides were reevaluated, and primers and PCR protocols intended to uniquely target Dehalogenimonas were developed and tested. Use of the genus-specific primers revealed the presence of both bacterial groups in groundwater at a Louisiana Superfund site.“Dehalococcoides” strains are the only bacteria presently known to reductively dehalogenate the carcinogen vinyl chloride (10-12, 17, 22), and DNA-based approaches have been widely applied to detect and quantify these bacteria in mixed cultures and environmental samples (1, 3, 4, 6, 7, 13, 15, 16, 20). As recently reported, Dehalococcoides strains are the closest previously cultured phylogenetic relatives of Dehalogenimonas lykanthroporepellens strains BL-DC-8 and BL-DC-9^T (18, 23). The newly isolated Dehalogenimonas strains, which can reductively dehalogenate a variety of polychlorinated alkanes (e.g., 1,2,3-trichloropropane and 1,2-dichloroethane) but not chlorinated ethenes (e.g., tetrachloroethene and vinyl chloride), however, are only distantly related to Dehalococcoides, with 90% identity in 16S rRNA gene sequences. Research reported here was aimed at (i) reevaluating PCR primers and protocols previously reported as allowing specific detection of Dehalococcoides 16S rRNA gene sequences in light of the 16S rRNA gene sequences of the recently isolated Dehalogenimonas strains and (ii) designing and testing PCR primers and protocols that allow detection and quantification of Dehalogenimonas strains.     

Analysis of the Fine-Scale Population Structure of “Candidatus Accumulibacter phosphatis” in Enhanced Biological Phosphorus Removal Sludge,Using Fluorescence In Situ Hybridization and Flow Cytometric Sorting

To investigate the fine-scale diversity of the polyphosphate-accumulating organisms (PAO) “Candidatus Accumulibacter phosphatis” (henceforth referred to as “Ca. Accumulibacter”), two laboratory-scale sequencing batch reactors (SBRs) for enhanced biological phosphorus removal (EBPR) were operated with sodium acetate as the sole carbon source. During SBR operations, activated sludge always contained morphologically different “Ca. Accumulibacter” strains showing typical EBPR performances, as confirmed by the combined technique of fluorescence in situ hybridization (FISH) and microautoradiography (MAR). Fragments of “Ca. Accumulibacter” 16S rRNA genes were retrieved from the sludge. Phylogenetic analyses together with sequences from the GenBank database showed that “Ca. Accumulibacter” 16S rRNA genes of the EBPR sludge were clearly differentiated into four “Ca. Accumulibacter” clades, Acc-SG1, Acc-SG2, Acc-SG3, and Acc-SG4. The specific FISH probes Acc444, Acc184, Acc72, and Acc119 targeting these clades and some helpers and competitors were designed by using the ARB program. Microbial characterization by FISH analysis using specific FISH probes also clearly indicated the presence of different “Ca. Accumulibacter” cell morphotypes. Especially, members of Acc-SG3, targeted by probe Acc72, were coccobacillus-shaped cells with a size of approximately 2 to 3 μm, while members of Acc-SG1, Acc-SG2, and Acc-SG4, targeted by Acc444, Acc184, and Acc119, respectively, were coccus-shaped cells approximately 1 μm in size. Subsequently, cells targeted by each FISH probe were sorted by use of a flow cytometer, and their polyphosphate kinase 1 (ppk1) gene homologs were amplified by using a ppk1-specific PCR primer set for “Ca. Accumulibacter.” The phylogenetic tree based on sequences of the ppk1 gene homologs was basically congruent with that of the 16S rRNA genes, but members of Acc-SG3 with a distinct morphology comprised two different ppk1 genes. These results suggest that “Ca. Accumulibacter” strains may be diverse physiologically and ecologically and represent distinct populations with genetically determined adaptations in EBPR systems.Enhanced biological phosphorus removal (EBPR) has been applied in many wastewater treatment plants to reduce the phosphorus that causes eutrophication in surface waters. EBPR employs polyphosphate-accumulating organisms (PAOs), which are enriched through alternating aerobic-anaerobic cycles (34). Since PAOs are essential for an understanding of EBPR, many candidates have been proposed as potential PAOs, such as Acinetobacter spp. (11), Tetrasphaera spp. (31), Microlunatus phosphovorus (36), Lampropedia spp. (40), and Gram-positive Actinobacteria (24). However, those organisms do not exhibit all of the characteristics of the EBPR biochemistry model. Recently developed culture-independent approaches such as PCR-clone libraries, fluorescence in situ hybridization (FISH), and microautoradiography (MAR) have highlighted an uncultured Rhodocyclus-related bacterium, “Candidatus Accumulibacter phosphatis” (henceforth referred to as “Ca. Accumulibacter”), as one of the most important PAO candidates (2, 5, 16, 22, 23, 27, 28, 47).Numerous studies have sought to investigate uncultured “Ca. Accumulibacter” and have shown the presence of genetically and physiologically different members with a global geographic distribution (3, 9, 22, 27, 39). For example, Kong et al. (22) identified two morphologically different “Ca. Accumulibacter” cells of small cocci and large coccobacilli labeled with PAOmix (PAO462, PAO651, and PAO846) in laboratory-scale EBPR reactors. Additional results showing phenotypic and morphological diversities of “Ca. Accumulibacter” cells also existed with respect to the different roles of denitrifying PAO (DPAO) in the EBPR process (3, 9, 23). Carvalho et al. (3) detected two different morphotypes of “Ca. Accumulibacter” with different nitrate reduction capabilities. The presence of other “Ca. Accumulibacter” strains with 15% genome sequence divergence from the dominant strains in metagenomic analyses is likely to explain these morphological and phenotypic differences (12). McMahon et al. (33) suggested the use of the polyphosphate kinase (ppk) gene, which is involved in the production of polyphosphate, for a finer elucidation of “Ca. Accumulibacter” diversity. He et al. (15) grouped “Ca. Accumulibacter” strains into five distinct clades, designated clades I, IIA, IIB, IIC, and IID, using ppk gene sequence information. Flowers and colleagues (9) previously reported that “Ca. Accumulibacter” cells of clade IA had nitrate reduction activity with phosphorus uptake but that “Ca. Accumulibacter” cells of clade IIA did not.FISH-fluorescence activated cell sorting (FACS) techniques have been used for the separation of specific microbial cells from complex microbial consortia and their metabolic gene analysis (14, 46). For example, Miyauchi et al. (35) sorted PAOmix probe-labeled “Ca. Accumulibacter” cells from EBPR sludge and analyzed their nitrite reductase gene (nirS) diversity. In the current study, we found that four different “Ca. Accumulibacter” clades (Acc-SG1, Acc-SG2, Acc-SG3, and Acc-SG4) were present in the EBPR sludge of laboratory-scale reactors supplied with acetate as the sole carbon source. We analyzed their morphological characteristics and ppk gene sequence information using a suite of FISH and FACS approaches and linked fine-scale phylogenetic diversities of “Ca. Accumulibacter” strains with their morphological characteristics and metabolic genes. This study will be useful for further genetic and physiological studies of different “Ca. Accumulibacter” clades.     

The Longin Domain Regulates the Steady-State Dynamics of Sec22 in Plasmodium falciparum

The specificity of vesicle-mediated transport is largely regulated by the membrane-specific distribution of SNARE (soluble N-ethylmaleimide-sensitive factor attachment protein receptor) proteins. However, the signals and machineries involved in SNARE protein targeting to the respective intracellular locations are not fully understood. We have identified a Sec22 ortholog in Plasmodium falciparum (PfSec22) that contains an atypical insertion of the Plasmodium export element within the N-terminal longin domain. This Sec22 protein partially associates with membrane structures in the parasitized erythrocytes when expressed under the control of the endogenous promoter element. Our studies indicate that the atypical longin domain contains signals that are required for both endoplasmic reticulum (ER)/Golgi apparatus recycling of PfSec22 and partial export beyond the ER/Golgi apparatus interface. ER exit of PfSec22 is regulated by motifs within the α3 segment of the longin domain, whereas the recycling and export signals require residues within the N-terminal hydrophobic segment. Our data suggest that the longin domain of PfSec22 exhibits major differences from the yeast and mammalian orthologs, perhaps indicative of a novel mechanism for Sec22 trafficking in malaria parasites.Plasmodium falciparum exhibits a complex network of endomembrane organelles that are unique to this obligate intracellular parasite of human erythrocytes. They include parasite-induced tubules and vesicles in the infected host cell and specialized secretory structures collectively known as the apical complex. The asexual blood stages of the parasite develop within a parasitophorous vacuole (PV) and thus are separated from the external milieu by three lipid bilayers: the parasite plasma membrane (PPM), the PV membrane (PVM), and the erythrocyte plasma membrane. To survive inside these terminally differentiated human erythrocytes, P. falciparum remodels the host cell compartment by exporting numerous proteins into the erythrocyte cytoplasm (12, 15, 49, 50, 57). The mechanisms by which both soluble and membrane-bound proteins are transported, first into the PV lumen, followed by translocation across the PVM and transport within the erythrocyte cytosol, are not fully understood (9). A majority of the exported proteins contain bipartite signals that comprise a “recessed” N-terminal signal sequence and a Plasmodium export element/vacuolar translocation sequence (PEXEL/VTS) that is characterized by the consensus sequence RX(L/I)X(D/E/Q). These signals are predicted to facilitate the transport of proteins into the PV (using their recessed, or N-terminal, signal sequences) and translocation across the PVM (using their PEXEL/VTS motifs) (5, 23, 29, 34). However, a subset of the exported proteins lack either one or both signal elements and may require novel targeting motifs for transport beyond the PPM (20, 43). A majority of the proteins enter the parasite secretory system via the endoplasmic reticulum (ER), where they are incorporated into ER-derived vesicles and then transported through the “unstacked” Golgi bodies to their final destinations (45, 48, 55, 56). Membrane-bound vesicular elements have been detected in the infected host cell cytosol, suggesting the existence of an extraparasitic vesicle-mediated transport process in malaria parasites (22, 47, 52). How vesicle targeting is achieved in P. falciparum parasites remains elusive.Vesicle targeting and fusion in eukaryotic cells involves proteins of the SNARE (soluble N-ethylmaleimide-sensitive factor attachment protein receptor) family (25, 41, 42, 44). SNAREs are “tail-anchored” proteins that function by forming complexes that bridge vesicle and target membranes during fusion (6, 7, 24). Distinct sets of SNARE proteins localize to different intracellular transport pathways using processes that are not well understood. Increasing evidence suggests that the N-terminal regions of SNARE proteins contain signals required for their subcellular localization (4, 31, 53). These N-terminal regions include the three-helical Habc bundles of syntaxin SNAREs and the “profilin-like” folds of long VAMPs (vesicle-associated membrane proteins), also known as longin domains (7, 17, 33, 40, 46). The Sec22 gene products in mammals and yeast are longin domain-containing SNAREs that cycle between the ER and Golgi compartments (3, 19, 31, 32). We have identified a Sec22 ortholog in P. falciparum (PfSec22) that contains a PEXEL/VTS sequence insertion between the α2 and α3 segments of the longin domain preceded by a stretch of hydrophobic residues that spans a region between the β5 and α2 segments (2). In this study, we examined the distribution of PfSec22 in P. falciparum-infected erythrocytes and investigated the role of the atypical longin domain in its steady-state localization. Our data show that the P. falciparum ortholog of Sec22 partially associates with noncanonical destinations (tubovesicular network and intraerythrocytic vesicles) in the infected erythrocytes and that the N-terminal longin domain exhibits a dual function, mediating ER-to-Golgi apparatus trafficking, as well as retrieval from the Golgi apparatus.     

Use of Ichip for High-Throughput In Situ Cultivation of “Uncultivable” Microbial Species

One of the oldest unresolved microbiological phenomena is why only a small fraction of the diverse microbiological population grows on artificial media. The “uncultivable” microbial majority arguably represents our planet''s largest unexplored pool of biological and chemical novelty. Previously we showed that species from this pool could be grown inside diffusion chambers incubated in situ, likely because diffusion provides microorganisms with their naturally occurring growth factors. Here we utilize this approach and develop a novel high-throughput platform for parallel cultivation and isolation of previously uncultivated microbial species from a variety of environments. We have designed and tested an isolation chip (ichip) composed of several hundred miniature diffusion chambers, each inoculated with a single environmental cell. We show that microbial recovery in the ichip exceeds manyfold that afforded by standard cultivation, and the grown species are of significant phylogenetic novelty. The new method allows access to a large and diverse array of previously inaccessible microorganisms and is well suited for both fundamental and applied research.It has been known for over a century that the overwhelming majority of microbial species do not grow on synthetic media in vitro and remain unexplored (13, 32, 37, 39, 40, 43). The rRNA and metagenomics approaches demonstrated a spectacular diversity of these uncultivated species (11, 21, 25-27, 30, 36). Accessing this “missing” microbial diversity is of significant interest for both basic and applied sciences and has been recognized as one of the principal challenges for microbiology today (12, 29, 41). In recent years, technical advances in cultivation methodologies have recovered a diverse set of ecologically relevant species (1, 3, 5, 7, 15, 20, 24, 28, 33, 42). However, by and large the gap between microbial diversity in nature and that in culture collections remains unchanged, and most microbial phyla still have no cultivable representatives (25, 29). Earlier, we developed a novel method of in situ cultivation of environmental microorganisms inside diffusion chambers (15). The rationale for such an approach was that diffusion would provide cells inside the chamber with naturally occurring growth components and enable those species that grew in nature at the time of the experiment to also grow inside the diffusion chambers. Expectedly, this method yields a rate of microbial recovery many times larger than those of standard techniques. Even so, this method is laborious and does not allow an efficient, high-throughput isolation of microbial species en masse. This limits the method''s applicability, for example, in the drug discovery effort. Here we transform this methodology into a high-throughput technology platform for massively parallel cultivation of “uncultivable” species. Capitalizing on earlier microfluidics methods developed for microbial storage and screening (4, 16), we have designed and tested an isolation chip, or ichip for short, which consists of hundreds of miniature diffusion chambers. If each diffusion minichamber is loaded with a single cell, the resulting culture is monospecific. The ichip thus allows microbial growth and isolation into pure culture in one step. Here we demonstrate that cultivation of environmental microorganisms inside the ichip incubated in situ leads to a significantly increased colony count over that observed on synthetic media. Perhaps even more significantly, species grown in ichips are different from those registered in standard petri dishes and are highly novel.     

Role of Flagella in Virulence of the Coral Pathogen Vibrio coralliilyticus

A recently available transposition system was utilized to isolate a nonmotile mutant of the coral-bleaching pathogen Vibrio coralliilyticus. The mutation was localized to the fhlA gene, and the mutant lacked flagella. The flhA mutant was unable to exhibit chemotaxis toward coral mucus or to adhere to corals and subsequently cause infection.Coral reefs have been described as the rain forests of the sea due to their enormous biodiversity. Unfortunately, during the past few decades nearly 30% of the worldwide coral population has been severely damaged by various diseases (9). Coral bleaching is a disruption of the Symbiodinium-coral symbiosis and results in “whitening” of the coral due to the loss of the Symbiodinium symbiont or its pigment. On a global scale, bleaching is one of the major coral diseases (5) and tends to correlate with increased seawater temperatures (10). Thermal stress is the generally accepted hypothesis to explain the mechanism of the disease. In the last several years, bacterial bleaching of corals has been suggested as an alternative hypothesis to explain some coral bleaching episodes (21, 22). Vibrio shiloi was the first bacterium shown to be a causative agent of coral bleaching in the Mediterranean coral Oculina patagonica (13, 14). More recently, Vibrio coralliilyticus has been reported to be the causative agent of temperature-induced bleaching of Pocillopora damicornis (3, 4) and white syndrome in Indo-Pacific corals (25). Thus, infections by V. coralliilyticus could have an impact on global coral health.Chemotaxis and flagellum-mediated motility allow bacteria to pursue nutrients and to reach and maintain their preferred niches for colonization (7, 8). Several Vibrio species (both pathogens and symbionts) require functional flagellum-mediated motility to invade their hosts and establish successful colonization (17, 18, 27, 28).In this study, we utilized a recently available Tn5-based transposition system to isolate a nonmotile mutant of the coral-bleaching pathogen V. coralliilyticus. The mutation was localized to the gene flhA. Here we demonstrate that the flagellum is critical for chemotaxis toward coral mucus, adhesion to the corals, and infection by V. coralliilyticus.     

Cultivation of Autotrophic Ammonia-Oxidizing Archaea from Marine Sediments in Coculture with Sulfur-Oxidizing Bacteria

The role of ammonia-oxidizing archaea (AOA) in nitrogen cycling in marine sediments remains poorly characterized. In this study, we enriched and characterized AOA from marine sediments. Group I.1a crenarchaea closely related to those identified in marine sediments and “Candidatus Nitrosopumilus maritimus” (99.1 and 94.9% 16S rRNA and amoA gene sequence identities to the latter, respectively) were substantially enriched by coculture with sulfur-oxidizing bacteria (SOB). The selective enrichment of AOA over ammonia-oxidizing bacteria (AOB) is likely due to the reduced oxygen levels caused by the rapid initial growth of SOB. After biweekly transfers for ca. 20 months, archaeal cells became the dominant prokaryotes (>80%), based on quantitative PCR and fluorescence in situ hybridization analysis. The increase of archaeal 16S rRNA gene copy numbers was coincident with the amount of ammonia oxidized, and expression of the archaeal amoA gene was observed during ammonia oxidation. Bacterial amoA genes were not detected in the enrichment culture. The affinities of these AOA to oxygen and ammonia were substantially higher than those of AOB. [¹³C]bicarbonate incorporation and the presence and activation of genes of the 3-hydroxypropionate/4-hydroxybutyrate cycle indicated autotrophy during ammonia oxidation. In the enrichment culture, ammonium was oxidized to nitrite by the AOA and subsequently to nitrate by Nitrospina-like bacteria. Our experiments suggest that AOA may be important nitrifiers in low-oxygen environments, such as oxygen-minimum zones and marine sediments.Archaea have long been known as extremophiles, since most cultivated archaeal strains were cultivated from extreme environments, such as acidic, hot, and high-salt environments. The view of archaea as extremophiles (i.e., acidophiles, thermophiles, and halophiles) has radically changed by the application of molecular technologies, including PCR in environmental microbiology. Using Archaea-specific PCR primers, novel archaeal 16S rRNA gene sequences were discovered in seawater (23, 27). Following these discoveries, an ever-increasing and unexpectedly high variety of archaeal 16S rRNA gene sequences has been reported from diverse “nonextreme” environments (67). This indicates that archaea are, like bacteria, ubiquitous in the biosphere rather than exclusively inhabiting specific extreme niches. Archaea are abundant in water columns of some oceanic provinces (33, 36) and deep-subsea floor sediments (11, 12, 48). Despite the increasing number of reports of the diversity and abundance of these nonextreme archaea by molecular ecological studies, their physiology and ecological roles have remained enigmatic.Oxidation of ammonia, a trait long thought to be exclusive to the domain Bacteria (13), was recently suggested to be a trait of archaea of the crenarchaeal groups I.1a and I.1b, based on a metagenome analysis (79) and supported by the discovery of archaeal amoA-like genes in environmental shotgun sequencing studies of Sargasso Sea water (80) and genomic analysis of “Candidatus Cenarchaeum symbiosum,” a symbiont of a marine sponge (30). Molecular ecological studies indicated that these ammonia-oxidizing archaea (AOA) are often predominant over ammonia-oxidizing bacteria (AOB) in ocean waters (9, 53, 87), soils (17, 47), and marine sediments (61). Critical evidence for autotrophic archaeal ammonia oxidation was obtained by the characterization of the first cultivated mesophilic crenarchaeon (group I.1a), “Candidatus Nitrosopumilus maritimus SCM1,” from an aquarium (38), and a related archaeon from North Sea water (87) and subsequently by enrichment of thermophilic AOA (22, 31). Whole-genome-based phylogenetic studies recently indicated that the nonthermophilic crenarchaea, including the AOA, likely form a phylum separate from the Crenarchaeota and Euryarchaeota phyla (15, 16, 72). This proposed new phylum was called Thaumarchaeota (15).Microorganisms in marine sediments contribute significantly to global biogeochemical cycles because of their abundance (85). Nitrification is essential to the nitrogen cycle in marine sediments and may be metabolically coupled with denitrification and anaerobic ammonium oxidation, resulting in the removal of nitrogen as molecular nitrogen and the generation of greenhouse gases, such as nitrous oxide (19, 75). Compared with studies on archaeal nitrification in the marine water column, only limited information on archaeal nitrification in marine sediments is available so far. Archaeal amoA genes have been retrieved from marine and coastal sediments (8, 26, 61), and the potentially important role of AOA in nitrification has been suggested based on the abundance of archaeal amoA genes relative to that of bacterial amoA genes in surface marine sediments from Donghae (South Korea) (61). Cultivation of AOA, although difficult (38), remains essential to estimating the metabolic potential of archaea in environments such as soils (47) and marine sediments (61). Here, we report the successful enrichment of AOA of crenarchaeal group I.1a from marine sediments by employing a coculture with sulfur-oxidizing bacteria (SOB) which was maintained for ca. 20 months with biweekly transfers. In this way, we were able to characterize AOA from marine sediments, providing a clue for the role of AOA in the nitrogen cycle of marine sediments.     

Tn502 and Tn512 Are res Site Hunters That Provide Evidence of Resolvase-Independent Transposition to Random Sites

In this study, we report on the transposition behavior of the mercury(II) resistance transposons Tn502 and Tn512, which are members of the Tn5053 family. These transposons exhibit targeted and oriented insertion in the par region of plasmid RP1, since par-encoded components, namely, the ParA resolvase and its cognate res region, are essential for such transposition. Tn502 and, under some circumstances, Tn512 can transpose when par is absent, providing evidence for an alternative, par-independent pathway of transposition. We show that the alternative pathway proceeds by a two-step replicative process involving random target selection and orientation of insertion, leading to the formation of cointegrates as the predominant product of the first stage of transposition. Cointegrates remain unresolved because the transposon-encoded (TniR) recombination system is relatively inefficient, as is the host-encoded (RecA) system. In the presence of the res-ParA recombination system, TniR-mediated (and RecA-mediated) cointegrate resolution is highly efficient, enabling resolution both of cointegrates involving functional transposons (Tn502 and Tn512) and of defective elements (In0 and In2). These findings implicate the target-encoded accessory functions in the second stage of transposition as well as in the first. We also show that the par-independent pathway enables the formation of deletions in the target molecule.It is widely recognized that mobile genetic elements contribute to genome plasticity and have been a driving force in the emergence and spread of resistance determinants within and between bacterial species; their impact is ongoing (10, 51). Significant among these elements are various classes of plasmids, transposons, and integrons which may lack resistance determinants or carry one or multiple determinants. Resistance determinants that have become globally dispersed in environmental and clinically significant bacteria include mercury(II) resistance (2, 17), evident even in ancient bacteria (27), and antibiotic resistance, which has increased in dominance since the advent of the antibiotic era (23, 40).This paper concerns the mercury resistance (mer) transposons Tn502 and Tn512, whose sequence organization and transpositional behavior show that they are new members of a family of elements exemplified by the mer transposon Tn5053 (22). These elements are closely related to those in the Tn402 family, which contain an integron (intI) recombination system (14, 36). Members of the two families differ in the positions of the mer or intI determinants (modules) near one end of the transposition (tni) module. The latter module contains four genes (tniABQR), and the entire transposon is bounded by 25-bp inverted-repeat termini (IRi and IRt). TniA, TniB, and TniQ are required to form the transpositional cointegrate, which is then resolved by the action of TniR (a serine resolvase) on a resolution (res) sequence located between tniR and tniQ (22). The transposon in its new location is flanked by 5-bp direct repeats (DRs) (20, 22). TniA, which contains a D,D(35)E transposase catalytic motif, is thought to function cooperatively with TniB, a putative nucleotide-binding protein, as the active TniAB transposase (21, 36). Studies of TniA conducted in vitro show binding to the IRs and to additional 19-bp repeat sequences that make up the complex termini of the transposon (21). The precise role of TniQ is unknown.An unexpected and unique feature of Tn5053 and Tn402 is that they depend on externally coded accessory functions for efficient transposition, namely, a res site served by a cognate resolvase (25). As a consequence, these transposons exhibit a strong transpositional bias for some target res sites (20, 25, 26) and have aptly been described as “res site hunters” (25). One such efficient interaction involves the res-ParA multimer resolution system of plasmid RP1 (IncPα); other plasmid- or transposon-encoded systems are less efficient or are refractory. Although the role of the external resolvase remains obscure, its capacity to bind to its cognate res is an essential requirement whereas its catalytic activity is not (20). For each interaction system, the target sites typically cluster in a single part of res but not necessarily within the same subregion and, on occasion, can lie in the vicinity of res. Typically, the transposon is in a single orientation with IRi closest to the resolvase gene. In one study, Tn402 clustered at two target sites, one within res and one nearby, and the orientations were different at the two sites (20).The experimentally observed target preference described above also occurs in natural associations of Tn5053/Tn402-like elements and became evident on sequencing class 1 integrons, which were often found positioned close to different res-resolvase gene regions (6, 20, 25). Most Tn402 family elements are comprised of an intI module that is flanked on the left by IRi and on the right by a 3′ conserved sequence (3′-CS) (13). In others, a remnant tni gene cluster may be present instead of the 3′-CS, and IRt occurs at the right flank. The structure of the latter category of integrons strongly indicated that they are defective transposons that were presumably capable of relocation provided that tni functions were supplied in trans (6, 32). The movement of In33 (Tn2521) from a chromosomal to a plasmid location appears to have been such an in trans event (30, 42), and others involving In0 and In2 are demonstrated in this study. In contrast, the integrons that lack the IRt end appear to be nonmobile remnants of Tn402-like transposons; they belong to several lineages, including those in which the incurred deletions are attributable to acquired insertion sequences (6). More recently, intact Tn5053/Tn402-like transposons and class 1 integrons have increasingly been detected in the res-parA region of IncP plasmids (39), which are arguably the most promiscuous of known plasmids (50). These various experimental and natural interactions provide insight into the dispersal pathways possible for Tn5053/Tn402-like elements.The res-hunting attribute is a striking feature that is experimentally supported by studies of four family members (namely, Tn5053 [22, 25], Tn402 [20, 26], and in this study, Tn502 [48] and Tn512). Another facet of the transposition of Tn502 is explored here. It concerns the observation that loss of the preferred par target region in RP1 does not abolish transposition of Tn502 (48), contrary to the finding with Tn5053 (25, 26) and, in this study, Tn512. The continued, low-frequency transposition of Tn502 involved at least three dispersed locations (48); however, nothing is known about the nature of these sites or about the features and requirements of the transposition process. Here we address these issues and uncover the existence of an alternative, par-independent pathway that is employed by Tn502 and is available to Tn512 under some circumstances. The study also provides information on the roles of the TniR and host (RecA) recombination systems in the resolution of transpositional cointegrates and on the ability of the par-independent transposition pathway to generate plasmid deletions.