Role of the Surface and Extracellular Substances of the Phytopathogenic Bacterium Xanthomonas campestris in Its Interactions with Cabbage Plants

Changes in some physiological and biochemical characteristics of cabbage (cv. Slava) seedling roots in response to inoculation with the phytopathogen Xanthomonas campestrisand its surface and extracellular substances were evaluated. Seven days after the inoculation, the growth of the roots was slightly suppressed and they contained increased amounts of peroxidase. The effect of the lipopolysaccharides stripped from the cell surface or isolated from the culture liquid of X. campestriswas similar to that of the whole cells of the phytopathogen. The bacterial lectin isolated from the cell surface material did not induce any defense response in cabbage plants but, presumably, could play a role in the contact interactions between bacteria and plants.     

Ultrastructural Analysis of the Extracellular Matter Secreted by the Psychrotolerant Bacterium Pseudoalteromonas antarctica NF3

The psychrotolerant strain Pseudoalteromonas antarctica NF₃, a Gram-negative bacterium isolated from muddy soil samples of Antarctica, secretes large amounts of a mucoid exopolymer with a high protein content. It has self-assembly properties and capacity to coat and protect liposomes against surfactants. We examined the ultrastructure of P. antarctica and the extracellular matter it secretes by transmission electron microscopy (TEM) after high-pressure freezing, freeze substitution (HPF-FS), and Epon embedding, and compared this with information obtained by conventional methods. The improvements brought about by HPF-FS to the ultrastructural preservation of the extracellular matter allowed us to establish for the first time, in P. antarctica NF₃, the presence of two components: a large amount of cell-derived outer membrane vesicles containing proteins and a capsular polymer around the cells.     

Dynamic Membrane Formation in Anaerobic Dynamic Membrane Bioreactors: Role of Extracellular Polymeric Substances

Dynamic membrane (DM) formation in dynamic membrane bioreactors plays an important role in achieving efficient solid-liquid separation. In order to study the contribution of extracellular polymeric substances (EPS) to DM formation in anaerobic dynamic membrane bioreactor (AnDMBR) processes, EPS extraction from and re-addition to bulk sludge were carried out in short-term filtration tests. DM formation behaviors could be well simulated by cake filtration model, and sludge with EPS re-addition showed the highest resistance coefficient, followed by sludge after EPS extraction. The DM layers exhibited a higher resistance and a lower porosity for the sludge sample after EPS extraction and for the sludge with EPS re-addition. Particle size of sludge flocs decreased after EPS extraction, and changed little with EPS re-addition, which was confirmed by interaction energy analysis. Further investigations by confocal laser scanning microscopy (CLSM) analysis and batch tests suggested that the removal of in-situ EPS stimulated release of soluble EPS, and re-added EPS were present as soluble EPS rather than bound EPS, which thus improved the formation of DM. The present work revealed the role of EPS in anaerobic DM formation, and could facilitate the operation of AnDMBR processes.     

Microphytobenthos,their Extracellular Polymeric Substances,and the Morphogenesis of Intertidal Sediments

Intertidal sediments are important areas that separate the land from the sea and form natural coastal defenses. They are known as highly productive ecosystems, fueling the coastal food web. It is also conceived that microphytobenthos contribute to the stability of intertidal sediments by increasing the erosion threshold and that they are major players in coastal morphodynamics. Depending on the sedimentary composition of intertidal flats, different types of microphytobenthos colonize the sediment surface. Fine sand sediment is often colonized by cyanobacteria, prokaryotic algae, which form dense and rigid microbial mats. Mudflats on the other hand are characterized by the development of thin biofilms of epipelic diatoms. Both groups of phototrophic microorganisms excrete extracellular polymeric substances (EPS), but they do so in different ways and for different reasons. Two operationally defined fractions, water- and EDTA-extractable EPS, have been obtained from intertidal diatom biofilms and from cultures. They differ in composition and their production seems to be under different metabolic control. Water-extractable EPS are considered to be closely associated with the diatoms and are rich in neutral sugars, notably glucose. These EPS show a dynamic relationship with the microphytobenthic biomass. EDTA-extractable EPS are tightly bound to the sediment, probably through bridging by divalent ions. This material is rich in uronic acids and other acid sugars and is weakly related to chlorophyll. These EPS have been conceived to be a major factor in the structuring and diagenesis of coastal sediments and essential for increasing the sediment erosion threshold. However, this relationship is now questioned.     

Importance of Extracellular Polymeric Substances from Thiobacillus ferrooxidans for Bioleaching

Leaching bacteria such as Thiobacillus ferrooxidans attach to pyrite or sulfur by means of extracellular polymeric substances (EPS) (lipopolysaccharides). The primary attachment to pyrite at pH 2 is mediated by exopolymer-complexed iron(III) ions in an electrochemical interaction with the negatively charged pyrite surface. EPS from sulfur cells possess increased hydrophobic properties and do not attach to pyrite, indicating adaptability to the substrate or substratum.     

Extraction of Structural Extracellular Polymeric Substances from Aerobic Granular Sludge

To evaluate and develop methodologies for the extraction of gel-forming extracellular polymeric substances (EPS), EPS from aerobic granular sludge (AGS) was extracted using six different methods (centrifugation, sonication, ethylenediaminetetraacetic acid (EDTA), formamide with sodium hydroxide (NaOH), formaldehyde with NaOH and sodium carbonate (Na₂CO₃) with heat and constant mixing). AGS was collected from a pilot wastewater treatment reactor. The ionic gel-forming property of the extracted EPS of the six different extraction methods was tested with calcium ions (Ca²⁺). From the six extraction methods used, only the Na₂CO₃ extraction could solubilize the hydrogel matrix of AGS. The alginate-like extracellular polymers (ALE) recovered with this method formed ionic gel beads with Ca²⁺. The Ca²⁺-ALE beads were stable in EDTA, formamide with NaOH and formaldehyde with NaOH, indicating that ALE are one part of the structural polymers in EPS. It is recommended to use an extraction method that combines physical and chemical treatment to solubilize AGS and extract structural EPS.     

Microbial Extracellular Polymeric Substances (EPS) in Fresh Water Sediments

Microbially produced extracellular polymeric substances (EPS) have been linked with many important ecological functions in natural sediments; yet, most information has been derived from marine systems. The present paper is the first comprehensive study on EPS (i.e., carbohydrates and proteins) dynamics in riverine sediments addressing spatial (six reservoirs and four groyne fields across three European rivers), temporal (all seasons in 2003–2005), and vertical (over a 50-cm sediment depth transect) pattern. The variation in hydrodynamic regime found in the reservoirs and groyne fields was reflected in the biomass and composition of the benthic microorganisms that produce EPS. The microphytobenthic communities consisted mainly of diatoms and a higher algal biomass (up to 248 μg g⁻¹ dry weight, DW) seemed to be indicative for higher amounts of secreted colloidal carbohydrates. Consequently, the model proposed by Underwood and Smith (1998) for the relation chlorophyll–colloidal carbohydrates was also applicable for upper riverine sediment layers. The close relation between algal biomass and bacterial cell counts (10⁸–10⁹ cells g⁻¹ DW) supports the idea of bacterial use of the secreted EPS. However, the data also suggest a contribution to the EPS pool through bacterial secretion of proteins/extracellular enzymes and possibly carbohydrates. Over depth, the relationships between microorganisms and EPS became increasingly decoupled along with increasing ratios of bound (refractory) to colloidal (labile) EPS. These data suggest fresh production of polymeric substances in upper sediment layers and mainly accumulation of refractory, biodegraded material in deeper layers. The high contents of EPS colloidal and bound carbohydrates (0.1–1.8 and 1.3–6.7 mg g⁻¹ DW, respectively) and EPS proteins (0.4–12.9 mg g⁻¹ DW) at the freshwater study sites might indicate an important role in sediment ecology.     

Influences of Extracellular Polymeric Substances on the Dewaterability of Sewage Sludge during Bioleaching

Extracellular polymeric substances (EPS) play important roles in regulating the dewaterability of sludge. This study sought to elucidate the influence of EPS on the dewaterability of sludge during bioleaching process. Results showed that, in bioleaching system with the co-inoculation of Acidithiobacillus thiooxidans TS6 and Acidithiobacillus ferrooxidans LX5 (A. t+A. f system), the capillary suction time (CST) of sludge reduced from 255.9 s to 25.45 s within 48 h, which was obviously better than the controls. The correlation analysis between sludge CST and sludge EPS revealed that the sludge EPS significantly impacted the dewaterability of sludge. Sludge CST had correlation with protein content in slime and both protein and polysaccharide contents in TB-EPS and Slime+LB+TB layers, and the decrease of protein content in slime and decreases of both protein and polysaccharide contents in TB-EPS and Slime+LB+TB layers improved sludge dewaterability during sludge bioleaching process. Moreover, the low sludge pH (2.92) and the increasing distribution of Fe in the solid phase were another two factors responsible for the improvement of sludge dewaterability during bioleaching. This study suggested that during sludge bioleaching the growth of Acidithiobacillus species resulted in the decrease of sludge pH, the increasing distribution of Fe in the solid phase, and the decrease of EPS content (mainly including protein and/or polysaccharide) in the slime, TB-EPS, and Slime+LB+TB layers, all of which are helpful for sludge dewaterability enhancement.     

Composition and Distribution of Extracellular Polymeric Substances in Aerobic Flocs and Granular Sludge

Extracellular polymeric substances (EPS) were quantified in flocculent and aerobic granular sludge developed in two sequencing batch reactors with the same shear force but different settling times. Several EPS extraction methods were compared to investigate how different methods affect EPS chemical characterization, and fluorescent stains were used to visualize EPS in intact samples and 20-μm cryosections. Reactor 1 (operated with a 10-min settle) enriched predominantly flocculent sludge with a sludge volume index (SVI) of 120 ± 12 ml g⁻¹, and reactor 2 (2-min settle time) formed compact aerobic granules with an SVI of 50 ± 2 ml g⁻¹. EPS extraction by using a cation-exchange resin showed that proteins were more dominant than polysaccharides in all samples, and the protein content was 50% more in granular EPS than flocculent EPS. NaOH and heat extraction produced a higher protein and polysaccharide content from cell lysis. In situ EPS staining of granules showed that cells and polysaccharides were localized to the outer edge of granules, whereas the center was comprised mostly of proteins. These observations confirm the chemical extraction data and indicate that granule formation and stability are dependent on a noncellular, protein core. The comparison of EPS methods explains how significant cell lysis and contamination by dead biomass leads to different and opposing conclusions.     

Effect of Cultivation Conditions on the Composition of Extracellular Polysaccharide-Containing Substances in the Bacterium Azospirillum brasilense

Maintenance of pH 7.0 during the fermentation period favors accumulation of high molecular weight polysaccharide-containing components called lipopolysaccharide–protein and polysaccharide–lipid complexes in the capsules and culture medium. Increased pH of the culture medium to 8.0 reduced the period of exponential growth and the yield of polysaccharide-containing complexes as compared to optimal conditions. Maintenance of pH 5.5 suppressed the culture growth and polysaccharide production. The polysaccharide–lipid complexes obtained when pH was stabilized at the level of 7.0–8.0 had relatively low molecular weights and included only acidic polysaccharides. The use of potassium gluconate instead of sodium malate as a source of carbon in the culture medium changed the polysaccharide composition and increased the content of glucosamine, which increased the affinity of polysaccharides for wheat germ agglutinin. Prolongation of Azospirillum cultivation to five days introduced new glucose-containing polysaccharide components in the capsule.     

Influence of Extracellular Polymeric Substances on the Adsorption of Cadmium onto Three Bacterial Species

In this study, we measured the effect of EPS on Cd and proton adsorption behaviors by measuring the extent of adsorption onto biomass with and without the EPS removed via a cation exchange resin. We conducted both Cd adsorption experiments and potentiometric titrations of biomass using three common bacterial species: one Gram-positive (Bacillus subtilis) and two Gram-negative (Shewanella oneidensis, Pseudomonas putida) species. The Cd adsorption experiments were conducted as a function of metal loading in order to probe whether environmentally-low metal loadings lead to different adsorption mechanisms and roles for EPS than the higher metal loadings of most previous adsorption studies. We suspended each biomass sample in a solution of dissolved Cd in 0.01?M NaClO₄ at metal loadings of 1, 2, 5, and 74?μmol/g. Surface complexation modeling (SCM) was used to determine stability constants for the important Cd-bacteria complexes, and the effect of metal loading on the resulting calculated stability constant values was determined.

In general, the measured bulk Cd adsorption behavior is unaffected by EPS removal. However, our potentiometric titration results suggest that EPS removal does alter the distribution of site types, but not the mass-normalized total site concentration within the biomass. SCM suggests that high affinity sulfhydryl sites control Cd binding under low metal loading conditions for B. subtilis and P. putida, and that sulfhydryl sites are present both on the cells and within the EPS for these species. Conversely, the SCM results suggest that Cd-sulfhydryl binding is un-important on the EPS of S. oneidensis.     

The Role of Extracellular Polymeric Substances in the Silicification of Calothrix: Evidence from Microbial Mat Communities in Hot Springs at Yellowstone National Park,USA

We provide nanoscale evidence of the role of sheath exopolymers in the silicification of the sheathed cyanobacteria Calothrix. Electron microscope observations of silicified Calothrix cells revealed that silica accretes directly onto EPS sheath fibrils to produce an open web of silica particles that could remain permeable to nutrients and waste products. We also found that silicified Calothrix cells from different microhabitats contained morphologically distinct silica particles. Differences in silicification texture suggest that environmental variables may influence silicification at the nanoscale. We develop a framework based on aggregation kinetics to address silicification processes in Calothrix and other sheathed cyanobacteria.     

Nanoscale Observations of Extracellular Polymeric Substances Deposition on Phyllosilicates by an Ectomycorrhizal Fungus

Microorganisms colonizing surfaces can exude a wide range of substances, generally called Extracellular Polymeric Substances (EPS). While EPS has often been visualized as thick mature strata embedding microbes, the initial phases of EPS production, its structure at the micro- and nanoscale and the microbial wall areas involved in its exudation are less known. In this work we use Atomic Force Microscopy to image EPS produced by the fungus Paxillus involutus on phyllosilicate surfaces. Hyphal tips initially deposit EPS which assumes the shape of a “halo” surrounding hyphae. The fusion of adjacent EPS halos is likely responsible for the creation of EPS monolayers covering mineral surfaces. It is also proposed that a specific region of hyphae initiates the formation of mineral channels produced by fungi. The results presented here permit for the first time to propose a model for the initial stages of EPS accumulation in fungi and filamentous microorganisms in general.     

Evaluation of Fluorescently Labeled Lectins for Noninvasive Localization of Extracellular Polymeric Substances in Sphingomonas Biofilms

Three strains of Sphingomonas were grown as biofilms and tested for binding of five fluorescently labeled lectins (Con A-type IV-TRITC or -Cy5, Pha-E-TRITC, PNA-TRITC, UEA 1-TRITC, and WGA-Texas red). Only ConA and WGA were significantly bound by the biofilms. Binding of the five lectins to artificial biofilms made of the commercially available Sphingomonas extracellular polysaccharides was similar to binding to living biofilms. Staining of the living and artificial biofilms by ConA might be explained as binding of the lectin to the terminal mannosyl and terminal glucosyl residues in the polysaccharides secreted by Sphingomonas as well as to the terminal mannosyl residue in glycosphingolipids. Staining of the biofilms by WGA could only be explained as binding to the Sphingomonas glycosphingolipid membrane, binding to the cell wall, or nonspecific binding. Glycoconjugation of ConA and WGA with the target sugars glucose and N-acetylglucosamine, respectively, was used as a method for evaluation of the specificity of the lectins towards Sphingomonas biofilms and Sphingomonas polysaccharides. Our results show that the binding of lectins to biofilms does not necessarily prove the presence of specific target sugars in the extracellular polymeric substances (EPS) in biofilms. The lectins may bind to non-EPS targets or adhere nonspecifically to components of the biofilm matrix.     

Biogenic Stabilization of Intertidal Sediments: The Importance of Extracellular Polymeric Substances Produced by Benthic Diatoms

The sediment-stabilizing effect of benthic diatoms was investigated in a laboratory setting. Axenic cultures of the benthic diatoms Nitzschia cf. brevissima and Cylindrotheca closterium were inoculated in Petri dishes containing sand and incubated under axenic conditions. By ensuring aseptic routines throughout the experiments, interference from other organisms occurring with diatoms in natural photothrophic biofilms was avoided. This allowed the examination of the role of benthic diatoms in sediment stabilization. Increases in the critical erosion shear stress of the sediment were observed in the presence of both diatom taxa relative to sterile sediment. However, N. cf. brevissima was more effective than C. closterium. Values of critical shear stress in the experimental system were in the same range as those observed in natural biofilms, which indicates that diatoms are important agents for biogenic stabilization. Extracellular carbohydrate contents in the microcosms were similar for both diatom species. However, in the presence of N cf. brevissima, extracellular carbohydrate correlated significantly to critical shear stress, explaining up to 80% of the variation, whereas this was not the case for C. closterium. Therefore, it was concluded that the quantity of extracellular polymeric substances (EPS) alone did not explain the biogenic stabilization. Observed adsorption of EPS to sediment particles depended on the relative amount of uronic acids in the exopolymers. Using fluorescently labeled lectins, confocal laser scanning microscopy showed that EPS secretion by N. cf. brevissima resulted in ordered three-dimensional matrix structures. It is suggested that the structuring of EPS plays an prominent role in the process of biostabilization, and that diatoms such as N. cf. brevissima are actively involved in producing the structure of EPS, whereas others such as C. closterium do not do so to the same extent.     

Draft Genome Sequence of a Psychrotolerant Sulfur-Oxidizing Bacterium, Sulfuricella denitrificans skB26, and Proteomic Insights into Cold Adaptation

Except for several conspicuous cases, very little is known about sulfur oxidizers living in natural freshwater environments. Sulfuricella denitrificans skB26 is a psychrotolerant sulfur oxidizer recently isolated from a freshwater lake as a representative of a new genus in the class Betaproteobacteria. In this study, an approximately 3.2-Mb draft genome sequence of strain skB26 was obtained. In the draft genome, consisting of 23 contigs, a single rRNA operon, 43 tRNA genes, and 3,133 coding sequences were identified. The identified genes include those required for sulfur oxidation, denitrification, and carbon fixation. Comparative proteomic analysis was conducted to assess cold adaptation mechanisms of this organism. From cells grown at 22°C and 5°C, proteins were extracted for analysis by nano-liquid chromatography-electrospray ionization-tandem mass spectrometry. In the cells cultured at 5°C, relative abundances of ribosomal proteins, cold shock proteins, and DEAD/DEAH box RNA helicases were increased in comparison to those at 22°C. These results suggest that maintenance of proper translation is critical for growth under low-temperature conditions, similar to the case for other cold-adapted prokaryotes.     

Extracellular Polymeric Substances (EPS) of Freshwater Biofilms Stabilize and Modify CeO2 and Ag Nanoparticles

Streams are potential receiving compartments for engineered nanoparticles (NP). In streams, NP may remain dispersed or settle to the benthic compartment. Both dispersed and settling NP can accumulate in benthic biofilms called periphyton that are essential to stream ecosystems. Periphytic organisms excrete extracellular polymeric substances (EPS) that interact with any material reaching the biofilms. To understand the interaction of NP with periphyton it is therefore crucial to study the interaction of NP with EPS. We investigated the influence of EPS on the physicochemical properties of selected NP (CeO₂, Ag) under controlled conditions at pH 6, 7.6, 8.6 and light or dark exposure. We extracted EPS from five different periphyton communities, characterized the extracts, and exposed CeO₂ and carbonate-stabilized Ag NP (0.5 and 5 mg/L, both 25 nm primary particle size) and AgNO₃ to EPS (10 mg/L) over two weeks. We measured NP size distribution, shape, primary particle size, surface plasmon resonance, and dissolution. All EPS extracts were composed of biopolymers, building blocks of humic substances, low molecular weight (M_r) acids, and small amphiphilic or neutral compounds in varying concentrations. CeO₂ NP were stabilized by EPS independent of pH and light/dark while dissolution increased over time in the dark at pH 6. EPS induced a size increase in Ag NP in the light with decreasing pH and the formation of metallic Ag NP from AgNO₃ at the same conditions via EPS-enhanced photoreduction. NP transformation and formation were slower in the extract with the lowest biopolymer and low M_r acid concentrations. Periphytic EPS in combination with naturally varying pH and light/dark conditions influence the properties of the Ag and CeO₂ NP tested and thus the exposure conditions within biofilms. Our results indicate that periphytic organisms may be exposed to a constantly changing mixture of engineered and naturally formed Ag NP and Ag⁺.     

Significance of Extracellular Protease for Growth of a Heterotrophic Bacterium, Aeromonas salmonicida

The role of protease produced by a heterotrophic bacterium during growth was investigated with Aeromonas salmonicida, the pathogen of fish furunculosis, strain A-7301 and its protease-deficient mutant NTG-1 induced by mutagenesis. Strain A-7301 produced extracellular protease in a mixed amino acid medium (composed of Gly, Ala, Val, Ile, Leu, Thr, Ser, Cys, Met, Phe, Tyr, Lys, Arg, Pro, His, Try, Asp, Asn, Glu, and Gln at equal concentrations of 0.1 g/liter). Its multiplication rate was limited by the amounts of amino acids present, whereas strain NTG-1 showed no protease production despite considerable growth similar to that of A-7301. There was no difference between A-7301 and NTG-1 in amino acid requirements for growth, and seven amino acids (Gly, Ala, Val, Thr, Cys, Met, and His) were found to be indispensable. A defined level of the mixed amino acids (0.4 to 0.5 g/liter) was needed for A-7301 to initiate a large production of protease. Neither of the strains grew well in a casein medium, to which no amino acids were added. However, when a protease fraction obtained from extracellular products of A-7301 by DEAE-cellulose column chromatography was added, NTG-1 successfully reproduced in the casein medium. These results indicate that the extracellular protease plays an important role in supplying A. salmonicida cells with available amino acids as nutrients and that higher growth is closely associated with protease production which stimulates further reproduction.     

Antibacterial Substances in Japanese Green Tea Extract against Streptococcus mutans,a Cariogenic Bacterium

An extract of Japanese green tea, one of the most popular drinks in Japan, was an inhibitor of the growth of Streptococcus mutans, a bacterium responsible for causing dental caries. The analysis of the extract revealed that the main antibacterial components of the extract were several polyphenolic compounds, especially gallocatechin (GC), epigallocatechin (EGC), and epigallocatechin gallate (EGCg). GC was the most active component and its minimum inhibitory concentration against the bacterium was around 250 μg per ml.     

Bacillus brevis,a Host Bacterium for Efficient Extracellular Production of Useful Proteins

Abstract

Since its discovery in 1998 RNA interference (RNAi), a potent and highly selective gene silencing mechanism, has revolutionized the field of biological science. The ability of RNAi to specifically down-regulate the expression of any cellular protein has had a profound impact on the study of gene function in vitro. This property of RNAi also holds great promise for in vivo functional genomics and interventions against a wide spectrum of diseases, especially those with “undruggable” therapeutic targets. Despite the enormous potential of RNAi for medicine, development of in vivo applications has met with significant problems, particularly in terms of delivery. For effective gene silencing to occur, silencing RNA must reach the cytoplasm of the target cell. Consequently, various strategies using chemically modified siRNA, liposomes, nanoparticles and viral vectors are being developed to deliver silencing RNA. These approaches, however, can be expensive and in many cases they lack target cell specificity or clinical compatibility. Recently, we have shown that RNAi can be activated in vitro and in vivo by non-pathogenic bacteria engineered to manufacture