Using Protein Dimers to Maximize the Protein Hybridization Efficiency with Multisite DNA Origami Scaffolds

DNA origami provides a versatile platform for conducting ‘architecture-function’ analysis to determine how the nanoscale organization of multiple copies of a protein component within a multi-protein machine affects its overall function. Such analysis requires that the copy number of protein molecules bound to the origami scaffold exactly matches the desired number, and that it is uniform over an entire scaffold population. This requirement is challenging to satisfy for origami scaffolds with many protein hybridization sites, because it requires the successful completion of multiple, independent hybridization reactions. Here, we show that a cleavable dimerization domain on the hybridizing protein can be used to multiplex hybridization reactions on an origami scaffold. This strategy yields nearly 100% hybridization efficiency on a 6-site scaffold even when using low protein concentration and short incubation time. It can also be developed further to enable reliable patterning of a large number of molecules on DNA origami for architecture-function analysis.     

DNA origami as biocompatible surface to match single-molecule and ensemble experiments

Single-molecule experiments on immobilized molecules allow unique insights into the dynamics of molecular machines and enzymes as well as their interactions. The immobilization, however, can invoke perturbation to the activity of biomolecules causing incongruities between single molecule and ensemble measurements. Here we introduce the recently developed DNA origami as a platform to transfer ensemble assays to the immobilized single molecule level without changing the nano-environment of the biomolecules. The idea is a stepwise transfer of common functional assays first to the surface of a DNA origami, which can be checked at the ensemble level, and then to the microscope glass slide for single-molecule inquiry using the DNA origami as a transfer platform. We studied the structural flexibility of a DNA Holliday junction and the TATA-binding protein (TBP)-induced bending of DNA both on freely diffusing molecules and attached to the origami structure by fluorescence resonance energy transfer. This resulted in highly congruent data sets demonstrating that the DNA origami does not influence the functionality of the biomolecule. Single-molecule data collected from surface-immobilized biomolecule-loaded DNA origami are in very good agreement with data from solution measurements supporting the fact that the DNA origami can be used as biocompatible surface in many fluorescence-based measurements.     

Nanopores formed by DNA origami: A review

Nanopores have emerged over the past two decades to become an important technique in single molecule experimental physics and biomolecule sensing. Recently DNA nanotechnology, in particular DNA origami, has been used for the formation of nanopores in insulating materials. DNA origami is a very attractive technique for the formation of nanopores since it enables the construction of 3D shapes with precise control over geometry and surface functionality. DNA origami has been applied to nanopore research by forming hybrid architectures with solid state nanopores and by direct insertion into lipid bilayers. This review discusses recent experimental work in this area and provides an outlook for future avenues and challenges.     

Nanostructured luminescently labeled nucleic acids

Important and emerging trends at the interface of luminescence, nucleic acids and nanotechnology are: (i) the conventional luminescence labeling of nucleic acid nanostructures (e.g. DNA tetrahedron); (ii) the labeling of bulk nucleic acids (e.g. single‐stranded DNA, double‐stranded DNA) with nanostructured luminescent labels (e.g. copper nanoclusters); and (iii) the labeling of nucleic acid nanostructures (e.g. origami DNA) with nanostructured luminescent labels (e.g. silver nanoclusters). This review surveys recent advances in these three different approaches to the generation of nanostructured luminescently labeled nucleic acids, and includes both direct and indirect labeling methods.     

Genotype-phenotype mapping with polyominos made from DNA origami tiles

The correlation between genetic information and characteristics of a living cell—its genotype and its phenotype—constitutes the basis of genetics. Here, we experimentally realize a primitive form of genotype-phenotype mapping with DNA origami. The DNA origami can polymerize into two-dimensional lattices (phenotype) via blunt-end stacking facilitated by edge staples at the seam of the planar DNA origami. There are 80 binding positions for edge staples, which allow us to translate an 80-bit long binary code (genotype) onto the DNA origami. The presence of an edge staple thus corresponds to a “1” and its absence to a “0.” The interactions of our DNA-based system can be reproduced by a polyomino model. Polyomino growth simulations qualitatively reproduce our experimental results. We show that not only the absolute number of base stacks but also their sequence position determine the cluster size and correlation length of the orientation of single DNA origami within the cluster. Importantly, the mutation of a few bits can result in major morphology changes of the DNA origami cluster, while more often, major sequence changes have no impact. Our experimental realization of a correlation between binary information (“genotype”) and cluster morphology (“phenotype”) thus reproduces key properties of genotype-phenotype maps known from living systems.     

141 DNA origami as a platform for assembly of nanophotonic elements

Achieving DNA-functionalized semiconductor quantum dots (QDs) that are robust enough to be compatible with the DNA nanotechnology that withstand precipitation at high temperature and ionic strength is a challenge. Here we report a method that facilitates the synthesis of stable core/shell (1–20 monolayers) QD-DNA conjugates in which the end part (5–10 nucleotides) of the phosphorothiolated oligonucleotides is embedded within the shell of the QD. These reliable QD-DNA conjugates exhibit excellent chemical, colloidal and photonic stability over a wide pH range (4–12) and at high salt concentrations (>100?mM Na⁺ or Mg²⁺), bright fluorescence emission with quantum yields of upto 70%, and broad spectral tunability with emission ranging from UV to NIR (360–800?nm). The assembly of these different QDs into DNA origami in a well-controlled pattern was demonstrated (Deng, Samanta, Nangreave, Yan, & Liu, 2012). We also used DNA origami as a platform to co-assemble a gold nanoparticle with 20?nm diameter (AuNP) and an organic fluorophore (TAMRA) and studied the distance dependent plasmonic interactions between the particle and the dye using steady state fluorescence and lifetime measurements. Greater fluorescence quenching was found at smaller inter-particle distances, which was accompanied by an enhancement of the decay rate. We further fabricated 20?nm and 30?nm AuNP homodimers with different inter-particle distances using DNA origami scaffolds and positioned a Cy3 fluorophore between the AuNPs in both the assemblies. Up to 50% enhancement of the Cy3 fluorescence quantum efficiency was observed for the dye between the 30?nm AuNPs. These results are in good agreement with the theoretical simulations (Pal et al., 2013).     

Conformation of ring single-stranded DNA measured by DNA origami structures

Measuring the mechanical properties of single-stranded DNA (ssDNA) is a complex challenge that has been addressed lately by different methods. We measured the persistence length of ring ssDNA using a combination of a special DNA origami structure, a self-avoiding ring polymer simulation model, and nonparametric estimation statistics. The method overcomes the complexities set forth by previously used methods. We designed the DNA origami nano structures and measured the ring ssDNA polymer conformations using atomic force microscopy. We then calculated their radius of gyration, which was used as a fitting parameter for finding the persistence length. As there is no simple formulation for the radius of gyration distribution, we developed a simulation program consisting of a self-avoiding ring polymer to fit the persistence length to the experimental data. ssDNA naturally forms stem-loops, which should be taken into account in fitting a model to the experimental measurement. To overcome that hurdle, we found the possible loops using minimal energy considerations and used them in our fitting procedure of the persistence length. Due to the statistical nature of the loops formation, we calculated the persistence length for different percentages of loops that are formed. In the range of 25–75% loop formation, we found the persistence length to be 1.9–4.4 nm, and for 50% loop formation we get a persistence length of 2.83 ± 0.63 nm. This estimation narrows the previously known persistence length and provides tools for finding the conformations of ssDNA.     

Nanopore fingerprinting of supramolecular DNA nanostructures

DNA nanotechnology has paved the way for new generations of programmable nanomaterials. Utilizing the DNA origami technique, various DNA constructs can be designed, ranging from single tiles to the self-assembly of large-scale, complex, multi-tile arrays. This technique relies on the binding of hundreds of short DNA staple strands to a long single-stranded DNA scaffold that drives the folding of well-defined nanostructures. Such DNA nanostructures have enabled new applications in biosensing, drug delivery, and other multifunctional materials. In this study, we take advantage of the enhanced sensitivity of a solid-state nanopore that employs a poly-ethylene glycol enriched electrolyte to deliver real-time, non-destructive, and label-free fingerprinting of higher-order assemblies of DNA origami nanostructures with single-entity resolution. This approach enables the quantification of the assembly yields for complex DNA origami nanostructures using the nanostructure-induced equivalent charge surplus as a discriminant. We compare the assembly yield of four supramolecular DNA nanostructures obtained with the nanopore with agarose gel electrophoresis and atomic force microscopy imaging. We demonstrate that the nanopore system can provide analytical quantification of the complex supramolecular nanostructures within minutes, without any need for labeling and with single-molecule resolution. We envision that the nanopore detection platform can be applied to a range of nanomaterial designs and enable the analysis and manipulation of large DNA assemblies in real time.     

DNA折纸纳米载体在药物递送中的应用

DNA纳米技术是基于沃森克里克碱基配对原则产生可编程核酸结构的技术。因其具有高精度的工程设计、前所未有的可编程性和内在的生物相容性等特点，运用该技术合成的纳米结构不仅可以与小分子、核酸、蛋白质、病毒和癌细胞相互作用，还可以作为纳米载体，递送不同的治疗药物。DNA折纸作为一种有效的、多功能的方法来构建二维和三维可编程的纳米结构，是DNA纳米技术发展的一个里程碑。由于其高度可控的几何形状、空间寻址性、易于化学修饰，DNA折纸在许多领域具有巨大的应用潜力。本文通过介绍DNA折纸的起源、基本原理和目前进展，归纳总结了运用DNA折纸进行药物装载和释放的方式，并基于此技术，展望了今后的发展趋势以及所面临的机遇和挑战。     

Submicron patterning of DNA oligonucleotides on silicon

The covalent attachment of DNA oligonucleotides onto crystalline silicon (100) surfaces, in patterns with submicron features, in a straightforward, two-step process is presented. UV light exposure of a hydrogen-terminated silicon (100) surface coated with alkenes functionalized with N-hydroxysuccinimide ester groups resulted in the covalent attachment of the alkene as a monolayer on the surface. Submicron-scale patterning of surfaces was achieved by illumination with an interference pattern obtained by the transmission of 248 nm excimer laser light through a phase mask. The N-hydroxysuccinimide ester surface acted as a template for the subsequent covalent attachment of aminohexyl-modified DNA oligonucleotides. Oligonucleotide patterns, with feature sizes of 500 nm, were reliably produced over large areas. The patterned surfaces were characterized with atomic force microscopy, scanning electron microscopy, epifluorescence microscopy and ellipsometry. Complementary oligonucleotides were hybridized to the surface-attached oligonucleotides with a density of 7 × 10¹² DNA oligonucleotides per square centimetre. The method will offer much potential for the creation of nano- and micro-scale DNA biosensor devices in silicon.     

Single strand DNA catenane synthesis using the formation of G-quadruplex structure

DNA is a good material for constructing nanostructures such as DNA origami. One of the challenges in this field is constructing a topologically complex structure. Here, we synthesized a DNA catenane through the formation of a G-quadruplex structure. The formation of the DNA catenane was investigated by gel electrophoresis. Interestingly, the synthesized DNA catenane was destroyed by heat treatment. Because conventional methods to construct DNA catenane include enzymatic ligation or chemical reactions, DNA is cyclized by covalent bond connection and never destroyed by heat treatment. To our knowledge, this is the first report of the synthesis of DNA catenane without using covalent bonds. Our novel way of synthesizing DNA catenane may be of use in easily recoverable DNA topological labeling.     

Linking two DNA duplexes with a rigid linker for DNA nanotechnology

DNA has recently emerged as a promising material for the construction of nanosized architectures. Chemically modified DNA has been suggested to be an important component of such architectural building blocks. We have designed and synthesized a novel H-shaped DNA oligonucleotide dimer that is cross-linked with a structurally rigid linker composed of phenylene and ethynylene groups. A rotatable DNA unit was constructed through the self-assembly of this H-shaped DNA component and two complementary DNA oligonucleotides. In addition to the rotatable unit, a locked DNA unit containing two H-shaped DNA components was also constructed. As an example of an extended locked structure, a hexagonal DNA origami dimer and oligomer were constructed by using H-shaped DNA as linkers.     

A primer to scaffolded DNA origami

Molecular self-assembly with scaffolded DNA origami enables building custom-shaped nanometer-scale objects with molecular weights in the megadalton regime. Here we provide a practical guide for design and assembly of scaffolded DNA origami objects. We also introduce a computational tool for predicting the structure of DNA origami objects and provide information on the conditions under which DNA origami objects can be expected to maintain their structure.     

A label-free light-scattering method to resolve assembly and disassembly of DNA nanostructures

DNA self-assembly, and in particular DNA origami, has evolved into a reliable workhorse for organizing organic and inorganic materials with nanometer precision and with exactly controlled stoichiometry. To ensure the intended performance of a given DNA structure, it is beneficial to determine its folding temperature, which in turn yields the best possible assembly of all DNA strands. Here, we show that temperature-controlled sample holders and standard fluorescence spectrometers or dynamic light-scattering setups in a static light-scattering configuration allow for monitoring the assembly progress in real time. With this robust label-free technique, we determine the folding and melting temperatures of a set of different DNA origami structures without the need for more tedious protocols. In addition, we use the method to follow digestion of DNA structures in the presence of DNase I and find strikingly different resistances toward enzymatic degradation depending on the structural design of the DNA object.     

Surface charge density measurement of a single protein molecule with a controlled orientation by AFM

The spatial distribution of functional groups causes a charge distribution that often has a close relationship with its biofunctions. To understand them of the protein molecules, measurements of the charge distribution under physiological conditions are desired. Atomic force microscopy (AFM) has been utilized to measure the surface charge density by measuring the electric double layer (EDL) force caused by the overlap of the EDLs on the surfaces of the AFM tip and the biomolecule. Here, we demonstrated the surface charge density measurement of a single streptavidin (SA) protein molecule by the three-dimensional force mapping method based on frequency modulation AFM (FM-AFM). The SA has a strong affinity to biotin because of the electrostatic interactions between the molecules. Therefore, the surface charge density measurements of the biotin-binding sites and other surface areas of the molecule have been anticipated. However, the surface charge density of the surfaces other than the biotin-binding side has never been measured. We demonstrate the surface charge density measurement of the top surface of the single SA molecule, which is perpendicular to the biotin-binding sides, with a controlled orientation using DNA origami as a template by FM-AFM in an electrolyte solution. The surface charge density of the top surface of the SA molecule was estimated by fitting the experimental force curves to the Derjaguin-Landau-Verwey-Overbeck theory. We found that the surface charge density of the top surface of the SA molecule is comparable to those reported earlier for the biotin-binding sides of the molecule. We expect that, by using the DNA origami technology, one can control the orientation of a biomolecule attached to the substrate and measure the surface charge density of the specific surface areas of the biomolecule to obtain information that will help us to understand the relationship between their structures and functions.     

Stabilization and structural changes of 2D DNA origami by enzymatic ligation

The low thermal stability of DNA nanostructures is the major drawback in their practical applications. Most of the DNA nanotubes/tiles and the DNA origami structures melt below 60°C due to the presence of discontinuities in the phosphate backbone (i.e., nicks) of the staple strands. In molecular biology, enzymatic ligation is commonly used to seal the nicks in the duplex DNA. However, in DNA nanotechnology, the ligation procedures are neither optimized for the DNA origami nor routinely applied to link the nicks in it. Here, we report a detailed analysis and optimization of the conditions for the enzymatic ligation of the staple strands in four types of 2D square lattice DNA origami. Our results indicated that the ligation takes overnight, efficient at 37°C rather than the usual 16°C or room temperature, and typically requires much higher concentration of T4 DNA ligase. Under the optimized conditions, up to 10 staples ligation with a maximum ligation efficiency of 55% was achieved. Also, the ligation is found to increase the thermal stability of the origami as low as 5°C to as high as 20°C, depending on the structure. Further, our studies indicated that the ligation of the staple strands influences the globular structure/planarity of the DNA origami, and the origami is more compact when the staples are ligated. The globular structure of the native and ligated origami was also found to be altered dynamically and progressively upon ethidium bromide intercalation in a concentration-dependent manner.     

135 Arranging enzymes and receptors with nanometer-scale precision on molecular switchboards

DNA is a useful material for constructing nanoscale structures in nearly any three-dimensional (3D) shape desired. The DNA nanostructure can also be equipped with specific docking sites for proteins. Cellular processes and chemical transformations take place in several reaction steps. Multiple enzymes cooperate in specific fashion to catalyze the sequential chemical transformation steps. Such natural systems are effectively reconstructed in vitro if the individual enzymes locate in the correct relative orientations. DNA-origami structures can be used as “molecular switchboards” to arrange enzymes and other proteins with nanometer-scale precision. A new method was developed for locating the proteins by means of special “adapters” known as zinc-finger proteins based only on proteins. Zinc fingers are suitable site-selective adapters for targeting specific locations within DNA-origami structures. Several different adapters carrying different proteins can independently bind at defined locations on this type of nanostructure. A basic leucine zipper (bZIP) protein is also a candidate for the site-selective adaptor. A well-characterized bZIP protein GCN4 was chosen as an adaptor for specific addresses. Analyses by atomic force microscopy and gel electrophoreses demonstrate specific binding of GCN4 adaptor to the addresses containing the GCN4 binding sites on DNA origami. The adaptor derived from GCN4 and that form a zinc-finger protein zif268, for which we have reported previously, acted as orthogonal adaptors to the respective addresses on DNA origami. Therefore, these orthogonal adaptors would be useful to place multiple engineered proteins at different addresses on DNA origami. Especially, the homodimeric nature of GCN4 adaptor is indispensable for constructing the assembly of the naturally abundant dimeric proteins and/or enzymes to efficiently carry out chemical reactions and signal transductions in vitro on DNA origami.     

Patterning protein complexes on DNA nanostructures using a GFP nanobody

DNA nanostructures have become an important and powerful tool for studying protein function over the last 5 years. One of the challenges, though, has been the development of universal methods for patterning protein complexes on DNA nanostructures. Herein, we present a new approach for labeling DNA nanostructures by functionalizing them with a GFP nanobody. We demonstrate the ability to precisely control protein attachment via our nanobody linker using two enzymatic model systems, namely adenylyl cyclase activity and myosin motility. Finally, we test the power of this attachment method by patterning unpurified, endogenously expressed Arp2/3 protein complex from cell lysate. By bridging DNA nanostructures with a fluorescent protein ubiquitous throughout cell and developmental biology and protein biochemistry, this approach significantly streamlines the application of DNA nanostructures as a programmable scaffold in biological studies.     

Compaction of single supercoiled DNA molecules adsorbed onto amino mica

A model of possible conformational transitions of supercoiled DNA in vitro in the absence of proteins under the conditions of increasing degree of compaction was developed. A 3993-bp pGEMEX supercoiled DNA immobilized on various substrates (freshly cleaved mica, standard amino mica, and modified amino mica with a hydrophobicity higher than that of standard amino mica) was visualized by atomic force microscopy in air. On the modified amino mica, which has an increased density of surface positive charges, single molecules with an extremely high degree of compaction were visualized in addition to plectonemic DNA molecules. As the degree of DNA supercoiling increased, the length of the first-order superhelical axis of molecules decreased from 570 to 370 nm, followed by the formation of second-and third-order superhelical axes about 280 and 140 nm long, respectively. The compaction of molecules ends with the formation of minitoroids about 50 nm in diameter and molecules of spherical shape. It was shown that the compaction of single supercoiled DNA molecules immobilized on amino mica to the level of minitoroids and spheroids is due to the shielding of mutually repulsing negatively charged phosphate groups of DNA by positively charged amino groups of the amino mica, which has a high charge density of its surface.