Circular dichroism studies on conformational changes in protein molecules upon adsorption on ultrafine polystyrene particles

The conformational changes in well-characterized model proteins [bovine ribonuclease A (RNase A), horseradish peroxidase, sperm-whole myoglobin, human hemoglobin, and bovine serum albumin (BSA)] upon adsorption on ultrafine polystyrene (PS) particles have been studied using circular dichroism (CD) spectroscopy. These proteins were chosen with special attention to molecular flexibility. The ultrafine PS particles were negatively charged and have average diameters of 20 or 30 nm. Utilization of these ultrafine PS particles makes it possible to apply the CD technique to determine the secondary structure of proteins adsorbed on the PS surface. Effects of protein properties and adsorption conditions on the extent of the changes in the secondary structure of protein molecules upon adsorption on ultrafine PS particles were studied. The CD spectrum changes upon adsorption were significant in the "soft" protein molecules (myoglobin, hemoglobin, and BSA), while they were insingnificant in the "rigid" proteins (RNase A and peroxidase). The soft proteins sustained a marked decrease in alpha-helix content upon adsorption. Moreover, the native alpha-helix content, which is given as the percentage of the alpha-helix content in the free proteins, of adsorbed BSA was found to decrease with decreasing pH and increase with increasing adsorbed amount. These observations confirm some well-known hypotheses for the confirmational chages in protein molecules upon adsorption. (c) 1992 John Wiley & Sons, Inc.     

Secondary structure of proteins adsorbed onto or embedded in polyelectrolyte multilayers

The structural changes of bovine serum albumin (BSA) and hen egg white lysozyme (HEL) upon their adsorption onto the surface or their embedding into the interior of poly(allylamine hydrochloride)-(poly(styrenesulfonate) (PAH-PSS) multilayer architectures were investigated by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. The presence of the polyelectrolytes seems, as previously observed for fibrinogen (J. Phys. Chem. B 2001, 105, 11906-11916), to prevent intermolecular interactions and, thus, protein aggregation at ambient temperature. The secondary structure of the proteins was somewhat altered upon adsorption onto the polyelectrolyte multilayers. The structural changes were larger when the charges of the multilayer outer layer and the protein were opposing. The adsorption of further polyelectrolyte layers onto protein-terminated architectures (i.e., embedding the proteins into a polyelectrolyte multilayer) did not cause considerable further changes in their secondary structures. The capacity of the polyelectrolyte architectures to delay the formation of intermolecular beta-sheets upon increasing temperatures was not uniform for the studied proteins. PSS in contact with HEL could largely prevent the heat-induced aggregation of HEL. In contrast, PAH had hardly any effect on the aggregation of BSA. The differences are explained on the basis of protein-polyelectrolyte interactions, affected mostly by the nature and the strength of the ionic interactions between the polyelectrolyte-protein contact surfaces.     

Induction of changes in the secondary structure of globular proteins by a hydrophobic surface

Circular dichroism, ellipsometry and radiolabeling techniques were employed to study the induction of changes in the secondary structure of BSA, myoglobin and cytochrome C by a hydrophobic surface. The results showed that adsorbed protein molecules lose their ordered native structure in the initial stage of adsorption and the structure appears to be a random or disordered conformation. Protein molecules adsorbed in later stages adopt a more ordered secondary structure ( helix and structure). The changes of secondary structure of globular proteins induced by a hydrophobic surface can be explained by the steric interaction between adsorbed proteins as well as by hydrophobic interactions during the adsorption process. In addition, there is obviously an intermediate stage in which the protein molecules are mainly in the structure, indicating that for certain proteins, the structure may be a more stable secondary structure than helix on the hydrophobic surface. Correspondence to: S.-F. Sui     

The investigation of protein adsorption behaviors on different functionalized polymers films

The adsorption of BSA and fibrinogen onto plasma-polymerized di-(ethylene glycol) vinyl ether, allylamine, and maleic anhydride films were investigated in detail by surface plasmon resonance spectroscopy (SPR). The chemical properties of the plasma polymers were initially determined by the plasma deposition conditions during the generation procedure. The analysis of the chemical structure of the films and the refractive index of plasma polymers in aqueous solution was carried out using Fourier transform infrared spectroscopy and waveguide mode spectroscopy, respectively. Using water contact angle measurement, the surface wettability of plasma polymers was also characterized. These properties have a critical influence on the behavior of protein adsorption on the surface of the plasma polymers. Protein adsorption was found to depend not only on the types of functionalized groups, but also on the plasma polymer thickness since the protein molecules penetrate into the plasma polymer network bulk. According to the size of protein molecules in aqueous solution and the amount of adsorbed proteins observed by SPR, the conformational changes of proteins could be deduced.     

The density and refractive index of adsorbing protein layers

The structure of the adsorbing layers of native and denatured proteins (fibrinogen, gamma-immunoglobulin, albumin, and lysozyme) was studied on hydrophilic TiO(2) and hydrophobic Teflon-AF surfaces using the quartz crystal microbalance with dissipation and optical waveguide lightmode spectroscopy techniques. The density and the refractive index of the adsorbing protein layers could be determined from the complementary information provided by the two in situ instruments. The observed density and refractive index changes during the protein-adsorption process indicated the presence of conformational changes (e.g., partial unfolding) in general, especially upon contact with the hydrophobic surface. The structure of the formed layers was found to depend on the size of the proteins and on the experimental conditions. On the TiO(2) surface smaller proteins formed a denser layer than larger ones and the layer of unfolded proteins was less dense than that adsorbed from the native conformation. The hydrophobic surface induced denaturation and resulted in the formation of thin compact protein films of albumin and lysozyme. A linear correlation was found between the quartz crystal microbalance measured dissipation factor and the total water content of the layer, suggesting the existence of a dissipative process that is related to the solvent molecules present inside the adsorbed protein layer. Our measurements indicated that water and solvent molecules not only influence the 3D structure of proteins in solution but also play a crucial role in their adsorption onto surfaces.     

FTIR and XPS studies of protein adsorption onto functionalized bioactive glass

Adsorption and structural changes that occur upon interaction between methemoglobin (MetHb) and 5-methyl-aminomethyl-uridine forming enzyme (MnmE) with the surface of a bioactive glass (BG) were investigated by Fourier Transform Infrared (FTIR) spectroscopy and X-ray Photoelectron Spectroscopy (XPS). The effect of glutaraldehyde (GA) as a coupling agent for protein adsorption on BG was also investigated. The comparative analysis of FTIR spectra recorded from lyophilized proteins and from bioactive glass surface after protein adsorption was considered in order to obtain information about the changes in the secondary structure of the proteins. XPS data were used to determine the surface coverage. The unfolding of adsorbed proteins due to interactions between the internal hydrophobic protein domains and the hydrophobic BG surface was evidenced. After adsorption, the amount of α-helix decreases and less ordered structures (turns, random coils and aggregates) are preponderant. These changes are less pronounced on the BG functionalized with GA, suggesting that the treatment with GA preserves significantly larger amounts of α-helices in the structure of both proteins after adsorption.     

Novel thymine-functionalized polystyrenes for applications in biotechnology. 2. Adsorption of model proteins

This paper investigates the adsorption of bovine serum albumin (BSA) and bovine hemoglobin (BHb) model proteins onto novel thymine-functionalized polystyrene (PS-VBT) microspheres, in comparison with polystyrene (PS) microspheres. Maximum adsorption was obtained for both proteins near their corresponding isoelectric points (pI at pH = 4.7 for BSA and 7.1 for BHb). FTIR and adsorption isotherm analysis demonstrated that, although both proteins were physisorbed onto PS through nonspecific hydrophobic interactions, adsorption onto the functionalized copolymers occurred by both physisorption and chemisorption via hydrogen bonding. FTIR analysis also indicated conformational changes in the secondary structure of BSA and BHb adsorbed onto PS, whereas little or no conformation change was seen in the case of adsorption onto PS-VBT. Atomic force microscopy (AFM), consistent with the isotherm results, also demonstrated monolayer adsorption for both proteins. AFM images of BSA adsorbed onto copolymers with 20 mol % surface VBT loading showed exclusively end-on orientation. Adsorption onto copolymers with lower functionality showed mixed end-on and side-on orientation modes of BSA, and only the side-on orientation was observed on PS. The AFM results agreed well with theoretically calculated and experimentally obtained adsorption capacities. AFM together with calculated and observed adsorption capacity data for BHb indicated that this protein might be highly compressed on the copolymer surface. Adsorption from a binary mixture of BSA and BHb onto PS-VBT showed good separation at pH=7.0; approximately 90% of the adsorbed protein was BHb. The novel copolymers have potential applications in biotechnology.     

Protein structural perturbation and aggregation on homogeneous surfaces

We have demonstrated that globular proteins, such as hen egg lysozyme in phosphate buffered saline at room temperature, lose native structural stability and activity when adsorbed onto well-defined homogeneous solid surfaces. This structural loss is evident by alpha-helix to turns/random during the first 30 min and followed by a slow alpha-helix to beta-sheet transition. Increase in intramolecular and intermolecular beta-sheet content suggests conformational rearrangement and aggregation between different protein molecules, respectively. Amide I band attenuated total reflection/Fourier transformed infrared (ATR/FTIR) spectroscopy was used to quantify the secondary structure content of lysozyme adsorbed on six different self-assembled alkanethiol monolayer surfaces with -CH3, -OPh, -CF3, -CN, -OCH3, and -OH exposed functional end groups. Activity measurements of adsorbed lysozyme were in good agreement with the structural perturbations. Both surface chemistry (type of functional groups, wettability) and adsorbate concentration (i.e., lateral interactions) are responsible for the observed structural changes during adsorption. A kinetic model is proposed to describe secondary structural changes that occur in two dynamic phases. The results presented in this article demonstrate the utility of the ATR/FTIR spectroscopic technique for in situ characterization of protein secondary structures during adsorption on flat surfaces.     

Protein interactions with nanosized hydrotalcites of different composition

Nanosized hydrotalcite-like compounds (HTlc) with different chemical composition were prepared and used to study protein adsorption. Two soft proteins, myoglobin (Mb) and bovine serum albumin (BSA), were chosen to investigate the nature of the forces controlling the adsorption and how these depend on the chemical composition of the support. Both proteins strongly interact with HTlc exhibiting in most cases a Langmuir-type adsorption. Mb showed a higher affinity for Nickel Chromium (NiCr-HTlc) than for Nickel Aluminum (NiAl-HTlc), while for BSA no significant differences between supports were found. Adsorption experiments in the presence of additives showed that proteins exhibited different types of interactions onto the same HTlc surface and that the adsorption was strongly suppressed by the addition of disodium hydrogen phosphate (Na₂HPO₄). Atomic force microscopy images showed that the adsorption of both proteins onto nanoparticles was followed by the aggregation of biocomposites, with a more disordered structure for BSA. Fluorescence measurements for adsorbed Mb showed that the inorganic nanoparticles induced conformational changes in the biomolecules; in particular, the interactions with HTlc surface quenched the tryptophan fluorescence and this process was particularly efficient for NiCr-HTlc. The adsorption of BSA onto the HTlc nanoparticles induced a selective quenching of the exposed fluorescent residues, as indicated by the blue-shift of the emission spectra of tryptophan residues and by the shortening of the fluorescence decay times.     

A quantitative and selective chromatography method for determining coverages of multiple proteins on surfaces

Competitive protein adsorption plays a key role in the surface hemocompatibility of biological implants. We describe a quantitative chromatography method to measure the coverage of multiple proteins physisorbed to surfaces. In this method adsorbed proteins are displaced by CHAPS (3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate) and then analyzed by high performance liquid chromatography to separate and quantify the individual proteins, in this case bovine serum albumin (BSA) and bovine fibrinogen (Fg). CHAPS displaced over 95% of the adsorbed proteins and was easily removed from solution by dialysis. This method was tested by measuring the coverage of BSA, 66 kDa, and Fg, 340 kDa, simultaneously adsorbed from solutions with concentration of 20 microg/ml, on bare and dextranized silicon. Relative to silicon, the dextranized surfaces were found to strongly inhibit protein adsorption, decreasing BSA and Fg coverages by 76 and 60%, respectively.     

Determination of the orientation of T4 lysozyme vectorially bound to a planar-supported lipid bilayer using site-directed spin labeling

Site-directed spin labeling is used to investigate the structure of adsorbed T4 lysozyme (T4L). A monolayer of T4L is prepared by tethering the protein selectively via a His-tag to the chelating headgroups (NTA Ni) of a planar quartz-supported lipid bilayer. This results in a vectorially oriented ensemble of proteins on the surface, which gives rise to angular-dependent electron paramagnetic resonance spectra. Similar measurements of spin-labeled lipid bilayers were used to characterize the structure and dynamics of the supports. Electron paramagnetic resonance line shape was analyzed using the stochastic Liouville equation approach developed by Freed and co-workers. The simulations reveal a conservation of the secondary and tertiary structure of T4L upon adsorption although slight conformational changes in the presence of the surface can be detected by probing tertiary contact sites. The orientation of the entire protein was deduced on the basis of an anisotropic motional model for the spin-labeled side chain. In addition, a polar order but azimuthal disorder of the molecules was assumed to fit the data. These results demonstrate the utility of site-directed spin labeling in combination with spectral simulation to study not only the secondary and tertiary structure of adsorbed proteins in monolayer coverage but also their orientation with respect to the surface.     

Interaction of fibrinogen with magnetite nanoparticles

The interaction between fibrinogen and magnetite nanoparticles in solution has been studied by the methods of spin labeling, ferromagnetic resonance, dynamic and Rayleigh light scattering. It is shown that protein molecules adsorb on the surface of nanoparticles to form multilayer protein covers. The number of molecules adsorbed on one nanoparticle amounts to ∼65 and the thickness of the adsorption layer amounts to ∼27 nm. Separate nanoparticles with fibrinogen covers (clusters) form aggregates due to interactions of the end D domains of fibrinogen. Under the influence of direct magnetic field, nanoparticles with adsorbed proteins form linear aggregates parallel to the force lines. It is shown that the rate of protein coagulation during the formation of fibrin gel under the action of thrombin on fibrinogen decreases ∼2 times in the presence of magnetite nanoparticles, and the magnitude of the average fiber mass/length ratio grows.     

Specific anchoring modes of two distinct dystrophin rod sub-domains interacting in phospholipid Langmuir films studied by atomic force microscopy and PM-IRRAS

Dystrophin rod repeats 1-3 sub-domain binds to acidic phosphatidylserine in a small vesicle binding assay, while the repeats 20-24 sub-domain does not. In the present work, we studied the adsorption behaviour of both sub-domains at the air/liquid interface and at the air/lipid interface in a Langmuir trough in order to highlight differences in interfacial properties. The adsorption behaviour of the two proteins at the air/liquid interface shows that they display surface activity while maintaining their alpha-helical secondary structure as shown by PM-IRRAS. Strikingly, R20-24 needs to be highly hydrated even at the interface, while this is not the case for R1-3, indicating that the surface activity is dramatically higher for R1-3 than R20-24. Surface-pressure measurements, atomic force microscopy and PM-IRRAS are used in a Langmuir experiment with DOPC-DOPS monolayers at two different surface pressures, 20 mN/m and 30 mN/m. At the lower surface pressure, the proteins are adsorbed at the lipid film interface while maintaining its alpha-helical structure. After an increase of the surface pressure, R1-3 subsequently produces a stable film, while R20-24 induces a reorganization of the lipid film with a subsequent decrease of the surface pressure close to the initial value. AFM and PM-IRRAS show that R1-3 is present in high amounts at the interface, being arranged in clusters representing 3.3% of the surface at low pressure. By contrast, R20-24 is present at the interface in small amounts bound only by a few electrostatic residues to the lipid film while the major part of the molecule remains floating in the sub-phase. Then for R1-3, the electrostatic interaction between the proteins and the film is enhanced by hydrophobic interactions. At higher surface pressure, the number of protein clusters increases and becomes closer in both cases implying the electrostatic character of the binding. These results indicate that even if the repeats exhibit large structural similarities, their interfacial properties are highly contrasted by their differential anchor mode in the membrane. Our work provides strong support for distinct physiological roles for the spectrin-like repeats and may partly explain the effects of therapeutic replacement of dystrophin deficiency by minidystrophins.     

BSA structural changes during homomolecular exchange between the adsorbed and the dissolved states

The secondary structure and the thermostability of bovine serum albumin (BSA), before adsorption and after homomolecular displacement from silica and polystyrene particles, are studied by circular dichroism spectroscopy and differential scanning calorimetry. The structural perturbations induced by the hydrophilic silica surface are reversible, i.e. BSA completely regains the native structure and stability after being exchanged. On the other hand, the adsorption on, and subsequent desorption from, polystyrene particles causes irreversible changes in the stability and (secondary) structure of BSA. The exchanged proteins have a higher denaturation temperature and a lower enthalpy of denaturation than native BSA. The alpha-helix content is reduced while the beta-turn fraction is increased in the exchanged molecules. Both effects are more pronounced when the protein is displaced from less crowded sorbent surfaces. The irreversible surface-induced conformational change may be related to some aggregation of BSA molecules after being exposed to a hydrophobic surface.     

Macromolecular crowding at membrane interfaces: adsorption and alignment of membrane peptides

Association of proteins to cellular membranes is involved in various biological processes. Various theoretical models have been developed to describe this adsorption mechanism, commonly implying the concept of an ideal solution. However, due to the two-dimensional character of membrane surfaces intermolecular interactions between the adsorbed molecules become important. Therefore previously adsorbed molecules can influence the adsorption behavior of additional protein molecules and their membrane-associated structure. Using the model peptide LAH₄, which upon membrane-adsorption can adopt a transmembrane as well as an in-planar configuration, we carried out a systematic study of the correlation between the peptide concentration in the membrane and the topology of this membrane-associated polypeptide. We could describe the observed binding behavior by establishing a concept, which includes intermolecular interactions in terms of a scaled particle theory.High surface concentration of the peptide shifts the molecules from an in-planar into a transmembrane conformation, a process driven by the reduction of occupied surface area per molecule. In a cellular context, the crowding-dependent alignment might provide a molecular switch for a cell to sense and control its membrane occupancy. Furthermore, crowding might have pronounced effects on biological events, such as the cooperative behavior of antimicrobial peptides and the membrane triggered aggregation of amyloidogenic peptides.     

Effect of thermal stability on protein adsorption to silica using homologous aldo-keto reductases

Gaining more insight into the mechanisms governing the behavior of proteins at solid/liquid interfaces is particularly relevant in the interaction of high-value biologics with storage and delivery device surfaces, where adsorption-induced conformational changes may dramatically affect biocompatibility. The impact of structural stability on interfacial behavior has been previously investigated by engineering nonwild-type stability mutants. Potential shortcomings of such approaches include only modest changes in thermostability, and the introduction of changes in the topology of the proteins when disulfide bonds are incorporated. Here we employ two members of the aldo-keto reductase superfamily (alcohol dehydrogenase, AdhD and human aldose reductase, hAR) to gain a new perspective on the role of naturally occurring thermostability on adsorbed protein arrangement and its subsequent impact on desorption. Unexpectedly, we find that during initial adsorption events, both proteins have similar affinity to the substrate and undergo nearly identical levels of structural perturbation. Interesting differences between AdhD and hAR occur during desorption and both proteins exhibit some level of activity loss and irreversible conformational change upon desorption. Although such surface-induced denaturation is expected for the less stable hAR, it is remarkable that the extremely thermostable AdhD is similarly affected by adsorption-induced events. These results question the role of thermal stability as a predictor of protein adsorption/desorption behavior.     

Adsorption of IgG onto hydrophobic teflon. Differences between the F(ab) and F(c) domains

The effect of differences in the degree of hydrophobicity of protein patches/fragments on the adsorption behaviour of the protein is investigated. The adsorption isotherm of a monoclonal mouse anti-human immunoglobulin G (isotype 2b) onto hydrophobic Teflon particles is measured using a depletion method. The adsorption-induced denaturation of the immunoglobulin as a function of the adsorbed amount is studied by differential scanning calorimetry, and the corresponding rearrangements in the secondary structure of the whole IgG molecule and its F(ab) and F(c) fragments are determined by circular dichroism spectroscopy. The effects of adsorption on the F(ab) and F(c) fragments in the intact IgG molecule occur independently. Adsorption of the whole IgG molecule leads to denaturation of the F(ab) fragments, whereas the F(c) fragment remains unperturbed; adsorption of the isolated fragments results in structural changes in both F(ab) and F(c). The surface hydrophobicity of the isolated fragments was studied by HPLC. These experiments support the hypothesis that differences in the degree of denaturation between F(ab) and F(c) are due to the higher degree of hydrophobicity of the F(ab) fragment. The adsorption-induced changes in the secondary structure are more prominent for the isolated fragments as compared to intact IgG. This is ascribed to the higher flexibility of the isolated fragment, as compared to the fragment in the whole molecule.     

Protein unfolding at interfaces: slow dynamics of alpha-helix to beta-sheet transition

A two-phase sequential dynamic change in the secondary structure of hen egg lysozyme (Lys) adsorbed on solid substrates was observed. The first phase involved fast conversion of alpha-helix to random/turns (within the first minute or at very low coverage or high substrate wettability) with no perceptible change in beta-sheet content. The second phase (1-1200 min), however, involved a relatively slow conversion from alpha-helix to beta-sheet without a noticeable change in random/turns. An important finding of this work is that the concentration of lysozyme in the adsorbed state has a substantial effect on the fractional content of secondary structures. Attenuated total reflection Fourier transform infrared (ATR/FTIR) spectroscopy, along with a newly-developed optimization algorithm for predicting the content of secondary structure motifs, was used to correlate the secondary structure and the amount of adsorbed lysozyme with the surface wettability of six different flat nanoporous substrates. Although three independent variables, surface wettability, solution concentration and time for adsorption, were used to follow the fractional structural changes of lysozyme, the results were all normalized onto a single plot with the amount adsorbed as the universal independent variable. Consequently, lateral interactions among proteins likely drive the transition process. Direct intermolecular force adhesion measurements between lysozyme and different functionalized self-assembled alkanethiol monolayers confirm that hydrophobic surfaces interact strongly with proteins. The lysozyme-unfolding pathway during early adsorption appears to be similar to that predicted by published molecular modeling results.     

Kinetics and thermodynamics of protein adsorption: a generalized molecular theoretical approach

The thermodynamics and kinetics of protein adsorption are studied using a molecular theoretical approach. The cases studied include competitive adsorption from mixtures and the effect of conformational changes upon adsorption. The kinetic theory is based on a generalized diffusion equation in which the driving force for motion is the gradient of chemical potentials of the proteins. The time-dependent chemical potentials, as well as the equilibrium behavior of the system, are obtained using a molecular mean-field theory. The theory provides, within the same theoretical formulation, the diffusion and the kinetic (activated) controlled regimes. By separation of ideal and nonideal contributions to the chemical potential, the equation of motion shows a purely diffusive part and the motion of the particles in the potential of mean force resulting from the intermolecular interactions. The theory enables the calculation of the time-dependent surface coverage of proteins, the dynamic surface tension, and the structure of the adsorbed layer in contact with the approaching proteins. For the case of competitive adsorption from a solution containing a mixture of large and small proteins, a variety of different adsorption patterns are observed depending upon the bulk composition, the strength of the interaction between the particles, and the surface and size of the proteins. It is found that the experimentally observed Vroman sequence is predicted in the case that the bulk solution is at a composition with an excess of the small protein, and that the interaction between the large protein and the surface is much larger than that of the smaller protein. The effect of surface conformational changes of the adsorbed proteins in the time-dependent adsorption is studied in detail. The theory predicts regimes of constant density and dynamic surface tension that are long lived but are only intermediates before the final approach to equilibrium. The implications of the findings to the interpretation of experimental observations is discussed.     

Total internal reflection fluorescence study of energy transfer in surface-adsorbed and dissolved bovine serum albumin

A simple adaptation of a commercial spectrofluorometer allows selective excitation of fluorescent biomolecules adsorbed to a solid surface while they are in equilibrium with a bulk solution. As a demonstration of this technique, we have detected a change in the effective singlet-singlet energy transfer in fluorescence-labeled bovine serum albumin (BSA) upon adsorption to a fused silica surface. The technique combines total internal reflection fluorescence excitation of surface-adsorbed BSA with a fluorescence spectroscopic examination of energy transfer between two different fluorophores that are covalently bound to amino groups in each BSA molecule. Two donor--acceptor pairs were used, 4-chloro-7-nitro-2,1,3-benzoxadiazole-rhodamine and dansyl-eosin. For studies of surface-adsorbed BSA, we constructed a device in which the excitation light of a standard fluorescence spectrometer totally internally reflects from a surface at which adsorbed BSA is in equilibrium with the bulk solution. A shallow evanescent wave is created, which excites fluorescence from only those BSA molecules in close proximity to the surface. Spectral examination shows significantly less effective singlet-singlet energy transfer from the donor to the acceptor in surface-adsorbed BSA relative to that in native bulk-dissolved BSA. Under appropriate and reasonable assumptions, the energy transfer change between native and adsorbed states of fluorescent BSA can be interpreted as a conformational change of BSA upon adsorption.