Efficient solid-phase synthesis of a large peptide by a single coupling protocol with a single HPLC purification step

Peptide chain assembly is now routinely performed by the use of automated synthesizers, although purification and characterization of large peptides still requires knowledge and experience. Structural biology has recently become closely involved in molecular recognition studies that often require the analysis of relatively large peptides using high-resolution NMR spectroscopy, for which synthesis of high-quality peptides in 5–10 mg amounts is of prime importance. The present study describes a solid-phase synthesis of a 7 kDa peptide related to the recently characterized ethylene-responsive element binding protein of tobacco, which is the conserved sequence among these proteins. The rapid and efficient preparation was carried out through a single coupling in combination with a single HPLC separation step. Assembly was performed in 63 h. Different coupling chemistries were employed and compared, involving benzotriazol-1-yloxy-tris(pyrrolidino)phosphonium hexafluorophosphate, 1-hydroxy-7-azabenzotriazole and/or the recently introduced reagent, N-[(dimethylamino)-1H-1,2,3-triazolo[4,5-b]pyridin-1-ylmethylene]-N-methylmethanaminium hexafluorophosphate N-oxide. After each synthesis, purified material was characterized by mass spectrometry, sequencing and enzymatic mapping and shown to contain a high proportion of the desired peptide.     

Extending the applicability of carboxyfluorescein in solid-phase synthesis

Optimized coupling protocols are presented for the efficient and automated generation of carboxyfluorescein-labeled peptides. Side products, generated when applying earlier protocols for the in situ activation of carboxyfluorescein, were eliminated by a simple procedure, yielding highly pure fluorescent peptides and minimizing postsynthesis workup. For the cost-efficient labeling of large compound collections, coupling protocols were developed reducing the amount of coupling reagent and fluorophore. To enable further chemical derivatization of carboxyfluorescein-labeled peptides in solid-phase synthesis, the on-resin introduction of the trityl group was devised as a protecting group strategy for carboxyfluorescein. This protecting group strategy was exploited for the synthesis of peptides labeled with two different fluorescent dyes, essential tools for bioanalytical applications based on fluorescence resonance energy transfer (FRET). Tritylation and optimized labeling conditions led to the development of a fluorescein-preloaded resin for the automated synthesis of fluorescein-labeled compound collections with uniform labeling yields.     

Efficient solid-phase synthesis of a large peptide by a single coupling protocol with a single HPLC purification step

Summary Peptide chain assembly is now routinely performed by the use of automated synthesizers, although purification and characterization of large peptides still requires knowledge and experience. Structural biology has recently become closely involved in molecular recognition studies that often require the analysis of relatively large peptides using high-resolution NMR spectroscopy, for which synthesis of high-quality peptides in 5–10 mg amounts is of prime importance. The present study describes a solid-phase synthesis of a 7 kDa peptide related to the recently characterized ethylene-responsive element binding protein of tobacco, which is the conserved sequence among these proteins. The rapid and efficient preparation was carried out through a single coupling in combination with a single HPLC separation step. Assembly was performed in 63 h. Different coupling chemistries were employed and compared, involving benzotriazol-1-yloxy-tris(pyrrolidino)phosphonium hexafluorophosphate, 1-hydroxy-7-azabenzotriazole and/or the recently introduced reagent,N-[(dimethylamino)-1H-1,2,3-triazolo[4,5-b]pyridin-1-ylmethylene]-N-methylmethanaminium hexafluorophosphateN-oxide. After each synthesis, purified material was characterized by mass spectrometry, sequencing and enzymatic mapping and shown to contain a high proportion of the desired peptide.     

Synthesis of peptides employing 9-fluorenylmethyl chloroformate as a coupling agent

Summary The synthesis of peptides employing 9-fluorenylmethyl chloroformate (Fmoc-Cl) as a coupling agent has been described. The method is simple, efficient and rapid. All the peptides have been obtained in good yield (70–95%). Furthermore, both the¹H NMR and the HPLC studies on Fmoc-Phg-Phe-OMe and Fmoc-D-Phg-Phe-OMe revealed that the coupling is free from racemization.     

Synthesis of peptides employing 9-fluorenylmethyl chloroformate as a coupling agent

The synthesis of peptides employing 9-fluorenylmethyl chloroformate(Fmoc-Cl) as a coupling agent has been described. The method is simple, efficient and rapid. All the peptides have been obtainedin good yield (70–95%). Furthermore, both the ¹H NMR and the HPLC studies on Fmoc-Phg-Phe-OMe and Fmoc-D-Phg-Phe-OMe revealed that the coupling is free from racemization.     

An activated triple bond linker enables 'click' attachment of peptides to oligonucleotides on solid support

A general procedure, based on a new activated alkyne linker, for the preparation of peptide-oligonucleotide conjugates (POCs) on solid support has been developed. With this linker, conjugation is effective at room temperature (RT) in millimolar concentration and submicromolar amounts. This is made possible since the use of a readily attachable activated triple bond linker enhances the Cu(I) catalyzed 1,3-dipolar cycloaddition ('click' reaction). The preferred scheme for conjugate preparation involves sequential conjugation to oligonucleotides on solid support of (i) an H-phosphonate-based aminolinker; (ii) the triple bond donor p-(N-propynoylamino)toluic acid (PATA); and (iii) azido-functionalized peptides. The method gives conversion of oligonucleotide to the POC on solid support, and only involves a single purification step after complete assembly. The synthesis is flexible and can be carried out without the need for specific automated synthesizers since it has been designed to utilize commercially available oligonucleotide and peptide derivatives on solid support or in solution. Methodology for the ready conversion of peptides into 'clickable' azidopeptides with the possibility of selecting either N-terminus or C-terminus connection also adds to the flexibility and usability of the method. Examples of synthesis of POCs include conjugates of oligonucleotides with peptides known to be membrane penetrating and nuclear localization signals.     

Use of the multipin peptide synthesis technique for the generation of antipeptide sera.

The multipin peptide synthesis technique has been used to map antigenic sites of proteins (1,2). Antibodies raised to the whole protein are screened on pin-synthesized overlapping octapeptides homologous with the protein of interest, and the peptides that bind antibodies clearly identify the epitopes. What is described in this study is a method using pin-synthesized peptides to generate specific antibodies to many peptides. Cleavable linkers have been developed (3) that, used together with the multipin peptide synthesis technique, allow the synthesis and cleavage of many thousands of peptides into aqueous solutions at physiological pH. This technique is useful for assays requiring peptides in solution, e.g., mapping of T-cell determinants. A technique has been developed for the cleavage of many peptides from pins and simultaneous coupling to immunogenic carriers (4). The conjugates produced are suitable for the generation of antipeptide antibodies. This procedure is illustrated using several 15 amino acid long peptides (15-mers), homologous with the sequence of a model antigen, myohemerythrin (MHr). The resulting antipeptide sera generated were tested by ELISA for titer and specificity on pin-synthesized peptides and beta-amide peptides and the protein antigen coated to microtiter plates.     

Use of the multipin peptide synthesis technique for the generation of antipeptide sera

The multipin peptide synthesis technique has been used to map antigenic sites of proteins (1,2). Antibodies raised to the whole protein are screened on pin-synthesized overlapping octapeptides homologous with the protein of interest, and the peptides that bind antibodies clearly identify the epitopes. What is described in this study is a method using pin-synthesized peptides to generate specific antibodies to many peptides. Cleavable linkers have been developed (3) that, used together with the multipin peptide synthesis technique, allow the synthesis and cleavage of many thousands of peptides into aqueous solutions at physiological pH. This technique is useful for assays requiring peptides in solution, e.g., mapping of T-cell determinants. A technique has been developed for the cleavage of many peptides from pins and simultaneous coupling to immunogenic carriers (4). The conjugates produced are suitable for the generation of antipeptide antibodies. This procedure is illustrated using several 15 amino acid long peptides (15-mers), homologous with the sequence of a model antigen, myohemerythrin (MHr). The resulting antipeptide sera generated were tested by ELISA for titer and specificity on pinsynthesized peptides and β-amide peptides and the protein antigen coated to microtiter plates.     

Shotgun protein sequencing: assembly of peptide tandem mass spectra from mixtures of modified proteins

Despite significant advances in the identification of known proteins, the analysis of unknown proteins by MS/MS still remains a challenging open problem. Although Klaus Biemann recognized the potential of MS/MS for sequencing of unknown proteins in the 1980s, low throughput Edman degradation followed by cloning still remains the main method to sequence unknown proteins. The automated interpretation of MS/MS spectra has been limited by a focus on individual spectra and has not capitalized on the information contained in spectra of overlapping peptides. Indeed the powerful shotgun DNA sequencing strategies have not been extended to automated protein sequencing. We demonstrate, for the first time, the feasibility of automated shotgun protein sequencing of protein mixtures by utilizing MS/MS spectra of overlapping and possibly modified peptides generated via multiple proteases of different specificities. We validate this approach by generating highly accurate de novo reconstructions of multiple regions of various proteins in western diamondback rattlesnake venom. We further argue that shotgun protein sequencing has the potential to overcome the limitations of current protein sequencing approaches and thus catalyze the otherwise impractical applications of proteomics methodologies in studies of unknown proteins.     

A comparison of sulfonated phenylisothiocyanates for reducing losses of lysine-containing peptides during automated sequencing

A simple procedure has been devised to couple lysine-containing peptides with 3-sulfophenylisothiocyanate or with 4-sulfophenylisothiocyanate and then to subject them to automated Edman degradation. The better repetitive yields in all cases were obtained with the 3-sulfophenylisothiocyanate. The reasons for these observations are explained and an improved method of synthesis of the reagent is given.     

Design, construction and application of a fully automated equimolar peptide mixture synthesizer.

A fully automated peptide synthesizer has been constructed that is capable of the synthesis of equimolar peptide mixtures and the simultaneous synthesis of 36 individual peptides. The synthesizer was constructed from a workstation of our own design utilizing a Zymark robot arm. A Macintosh II computer coordinates the movements of the robotic arm, the switching of over 40 solenoid valves and the monitoring of sensors in the workstation. The robot hands are used to deliver solvents from pressurized spigot lines and to pipet amino acid solutions from reservoirs to an array of reaction vessels. Liquid dispensing, reagent mixing and solvent removal are controlled from a multifunction I/O board in the computer. The design features of the synthesizer are presented, as well as the characterization of multiple individual peptides, a simple mixture of 19 components, and a complex mixture of 15,625 components.     

Synthesis of insulin-like growth factor I using N-methyl pyrrolidinone as the coupling solvent and trifluoromethane sulphonic acid cleavage from the resin

Insulin-like growth factor I (IGF-I), a protein of 70 amino acid residues and 3 cystine bridges, has been synthesized by two solid phase Boc methods. The first method used N-methylpyrrolidinone as the solvent with single coupling cycles while the second synthesis used dimethylformamide and dichloromethane as the solvents with a double-coupling protocol. In both cases, trifluoroacetic acid/trifluoromethanesulphonic acid cleavage of the peptide from the resin was employed. Purification of the cleavage products followed by removal of the S-acetamidomethyl protecting groups gave reduced peptides which were then oxidized under conditions favouring the formation of the correct disulphide bonds. The purified synthetic IGF-I peptides were full agonists of natural IGF-I in a radioimmunoassay, in an IGF-I radioreceptor assay, in a bioassay which measures the stimulation of protein synthesis in rat L6 myoblasts and in an IGF-binding protein competitive binding assay. Moreover, in each of these assays, the synthetic IGF peptides were found to be at least 70% as potent as natural IGF-I.     

Tandem Peptide Ligation for Synthetic and Natural Biologicals

We describe the concept and methods of peptide ligation and tandem peptide ligation for preparing synthetic and natural biologicals. Peptide ligation is a segment coupling method for free peptides or proteins through an amide bond without the use of a coupling reagent or a protecting group scheme. Because unprotected peptides or proteins prepared from either a chemical or biochemical source are being used as building blocks, the ligation removes the size limitation for peptide and protein synthesis. A key feature of the peptide ligation is that the coupling reaction is orthogonal, i.e. it is specific to a particular alpha-amino terminus (NT). This NT-amino acid-specific feature permits the development of a tandem peptide ligation method employing three unprotected peptide segments containing different NT-amino acids to form consecutively two amide bonds, an Xaa-SPro (thiaproline) and then an Xaa-Cys. This strategy was tested in peptides ranging from 28 to 70 amino acid residues, including analogues of somatostatins and two CC-chemokines MIP-1alpha and MIP-1beta. The thiaproline replacements in these peptides and proteins did not result in altered biological activity. By eliminating the protecting group scheme and coupling reagents, tandem ligation of multiple free peptide segments in aqueous solutions enhances the scope of protein synthesis and may provide a useful approach for preparing protein biologicals and synthetic vaccines.     

Microsequence analysis of peptides and proteins. V. Design and performance of a novel gas-liquid-solid phase instrument

We describe the construction and performance of a novel, automated, Edman chemistry-based microsequencer. The reagent and solvent delivery system, the reaction cartridge for coupling and cleavage, and the conversion flask are all constructed from chemically inert perfluoroelastomers. The delivery valves are of a new design incorporating the use of electromagnetically actuated solenoids and zero-dead-volume construction, and may be connected in a modular fashion resulting in multiple inputs with a single output line which can be flushed with inert gas. The bottle closures are of a new design based on an all-Teflon compression fitting. The reaction cartridge and conversion flask are thermostated by solid-state heaters in an aluminum block. The overall size of the instrument is 25 X 34 X 14 in. The chemistry utilizes 2% aqueous triethylamine as the coupling base which is delivered to the reaction cartridge via a stream of nitrogen. The "gas-phase" delivery of the coupling base and the cleavage acid (trifluoroacetic acid) is modeled after the method described by R. M. Hewick et al. (J. Biol. Chem. 256, 7990-7997,1981). The instrument has performed well over a period of 3 years in terms of low background peaks, sensitivity in the picomole range, and reliability of operation. The use of economical components, ease of construction and operation, and sensitive analytical capability make this instrument a useful tool for microsequence analysis of peptides and proteins.     

Automated solid-phase peptide synthesis: use of 2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium tetrafluoroborate for coupling of tert-butyloxycarbonyl amino acids.

2-(1H-Benzotriazol-1-yl)-1,1,3,3-tetramethyluronium tetrafluoroborate (TBTU) has been adapted for use as a coupling reagent for tert-butyloxycarbonyl (Boc) amino acids in automated solid-phase peptide synthesis. When compared to the existing preformed symmetrical anhydride procedure employing dicyclohexyl-carbodiimide (DCC), the use of TBTU in the presence of 1-hydroxybenzotriazole (HOBt) provides a more efficient coupling procedure for Boc-amino acid derivatives. Overall cycle times using TBTU/HOBt coupling reagents (30 min) compare favorably to those of the DCC-mediated procedure (approx 65 min). Dimethylformamide can be used as the sole solvent for both activation and coupling reactions. Implementation of TBTU/HOBt coupling conditions does not require replumbing of any lines of the Applied Biosystems Model 430A instrument and necessitates changes to only three reagent bottle positions. The variable coupling efficiencies of Boc-asparagine following activation with TBTU/HOBt (as low as 89%) can be overcome by protection of the amide function of Boc-asparagine with the 9-xanthyl group. Examples of the synthesis and characterization of a number of peptides ranging in length from 13 to 29 residues are given.     

Microwave-assisted Boc-solid phase peptide synthesis of cyclic cysteine-rich peptides.

In this study we describe the first protocols for the synthesis of cystine-rich peptides in the presence of microwave radiation with Boc-solid phase peptide synthesis (SPPS). This method is exemplified for macrocyclic peptides known as cyclotides, which comprise approximately 30 amino acids and incorporate a cystine knot arrangement of their three disulfide bonds. However, the method is broadly applicable for a wide range of peptides using Boc-SPPS, especially for SPPS of large peptides via native chemical ligation. Microwave radiation produces peptides in high yield and with high purity, and we were able to reduce the time for the assembly of approximately 30 mer peptide chains to an overnight reaction in the automated microwave-assisted synthesis.     

Chemical synthesis and biological investigation of a 77-mer oligoribonucleotide with a sequence corresponding to E. coli tRNA(Asp)

A 77-mer RNA with the sequence of Eschlerichia coli tRNA(Asp) has been chemically synthesised using standard automated phosphoramidite chemistry with the coupling reagent 4,5-dicyanoimidazole (DCI). The synthesis was carried out on a 1000 A CPG-column and. after deprotection and gel purification, a yield of about 7 mmol with a purity of > 95% was reproducibly obtained. By comparing automated synthesis of the 77-mer RNA using 1H-tetrazole and DCI as activator, DCI is advantageous in producing longer RNAs. However, for shorter RNAs ( <40 mer) no difference could be observed. In addition to the all-ribo tRNA(Asp) carrying the wild-type sequence, two variants were synthesised, one with a single C to G48 mutation and the second with a 2'-deoxy modification at C48. The three tRNAs were tested for their aminoacylation efficiency and high affinity binding to E. coli RNase P RNA. The results demonstrate that chemically synthesised 77-mer oligoribonucleotides can be successfully used for structure function studies.     

Thiocarbamate‐linked peptides by chemoselective peptide ligation

Peptide chemical ligation chemistries, which allow the chemoselective coupling of unprotected peptide fragments, are useful tools for synthesizing native polypeptides or unnatural peptide‐based macromolecules. We show here that the phenylthiocarbonyl group can be easily introduced into peptides on α or ε amino groups using phenylthiochloroformate and standard solid‐phase method. It reacts chemoselectively with cysteinyl peptides to give an alkylthiocarbamate bond. S,N‐shift of the alkylaminocarbonyl group from the Cys side chain to the α‐amino group did not occur. The method was used for linking two peptide chains through their N‐termini, for the synthesis of a cyclic peptide or for the synthesis of di‐ or tetravalent multiple antigenic peptides (MAPs). Thiocarbamate ligation is thus complementary to thioether, thioester or disulfide ligation methods. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

An apparatus for simultaneous manual solid-phase synthesis of multiple peptide analogs

A new design of reaction vessel for simultaneous manual solid-phase synthesis of multiple peptide analogs is described. Simultaneous use of four of these vessels attached to a single rotary mixer has been successfully applied to synthesis of two sets of four decapeptide amide analogs. Efficient coupling was indicated by chemical determination at the end of each synthesis cycle and overall final yields of between 78 and 84% were obtained. The products obtained were of a high quality, as assessed by high-performance liquid chromatography and amino acid analysis. This system allows expeditious synthesis of multiple peptide analogs for structure-function studies with economical use of efficiently ventilated laboratory space.     

Solid-phase peptide synthesis: a silver anniversary report

It has been a quarter of a century since Merrifield's initial report on solid-phase peptide synthesis. The field has matured significantly in recent years with a better understanding of the underlying chemistry. This is reflected by new, milder orthogonal protection schemes and more efficient coupling methods, some of which have been incorporated into automated systems. Advances in purification, especially high performance liquid chromatography, have had a major impact. The efficacy of these improvements has been demonstrated by an impressive litany of applications to biological problems.