Conformational and functional studies of three gelsolin subdomain-1 synthetic peptides and their implication in actin polymerization

Gelsolin, a calcium and inositol phospholipid-sensitive protein, regulates actin filament length. Its activity is complex (capping, severing, etc.) and is supported by several functional domains. The N-terminal domain alone (S1), in particular, is able to impede actin polymerization. Our investigations were attempted to precise this inhibitory process by using synthetic peptides as models mimicking gelsolin S1 activity. Three peptides issued from S1 and located in gelsolin—actin interfaces were synthesized. The peptides (15–28, 42–55, and 96–114 sequences) were tested for their conformational and actin binding properties. Although the three peptides interact well with actin, only peptide 42–55 affects actin polymerization. A detailed kinetic study shows that the latter peptide essentially inhibits the nucleation step during actin polymerization. In conclusion, the present work shows that the binding of a synthetic peptide to a small sequence located outside the actin—actin interface is essential in the actin polymerization process. © 1997 John Wiley & Sons, Inc. Biopoly 41: 647–655, 1997     

Role of the N- and C-terminal actin-binding domains of gelsolin in barbed filament end capping.

Gelsolin is a bivalent Ca(2+)-modulated actin-binding protein that severs, nucleates, and caps filaments. In order to gain a better understanding of the capping mechanism we have studied N- and C-terminal gelsolin fragments, 14NT and 41CT, each of which contains a single functional actin-binding site. The very tight binding measured between gelsolin and the barbed filament end requires gelsolin to greatly decrease the dissociation rate constant of the terminal actin from this end. A mechanism that could account for the observed decrease in dissociation is one in which gelsolin links two actin monomers so that they dissociate more slowly as a dimer. This cannot be the only mechanism, however, since, as shown here, 14NT and 41CT, fragments with single actin-binding sites, decrease the dissociation rate of the capped terminal actin molecule. The observations suggest that these fragments induce a conformational change in the actin monomer that either increases the affinity or alters the kinetics of the terminal actin-actin bond. The available data argue for strengthening of the terminal actin-actin bond.     

Definition of an N-terminal actin-binding domain and a C-terminal Ca2+ regulatory domain in human brevin

Brevin is a Ca2+-modulated actin-associated protein that will sever F-actin and cap barbed filament ends. Limited proteolysis with chymotrypsin or subtilisin cleaves the molecule approximately in half. Cleavage is approximately 10-fold more rapid in Ca2+ than in EGTA. The two fragments are readily separated from each other and from undigested brevin by high pressure liquid chromatography on a DEAE resin. A 40,000-mol-wt fragment from the N-terminal is not retained by DEAE, while a 45,000-mol-wt C-terminal fragment binds more tightly than brevin. The N-terminal fragment retains approximately 10% of the nucleation activity, caps barbed ends, and retains 50% of the total severing activity defined by dilution induced depolymerization of pyrenyl actin, but, in contrast to brevin, none of these functions are affected by Ca2+. Fluorescent actin binding studies and gel-filtration demonstrate that the 40,000-mol-wt fragment binds two actin monomers. The 45,000-mol-wt C-terminal fragment has no severing, nucleating, or capping activity. Cross-reaction with two monoclonal antibodies against two specific Ca2+-induced conformations of human platelet gelsolin suggest that both Ca2+ binding sites are located on the carboxyl half of the brevin molecule. One epitope, defined as the rapidly exchanging Ca2+ binding site in the gelsolin-actin complex, is lost when a 20,000-mol-wt fragment is cleaved from the carboxyl terminal. The second epitope, related to the poorly exchanging Ca2+ binding site in the complex, is nearer the middle of the brevin molecule.     

An Arabidopsis Class II Formin,AtFH19, Nucleates Actin Assembly,Binds to the Barbed End of Actin Filaments and Antagonizes the Effect of AtFH1 on Actin Dynamics

Formin is a major protein responsible for regulating the nucleation of actin filaments, and as such, it permits the cell to control where and when to assemble actin arrays. It is encoded by a multigene family comprising 21 members in Arabidopsis thaliana. The Arabidopsis formins can be separated into two phylogenetically-distinct classes: there are 11 class I formins and 10 class II formins. Significant questions remain unanswered regarding the molecular mechanism of actin nucleation and elongation stimulated by each formin isovariant, and how the different isovariants coordinate to regulate actin dynamics in cells. Here, we characterize a class II formin, AtFH19, biochemically. We found that AtFH19 retains all general properties of the formin family, including nucleation and barbed end capping activity. It can also generate actin filaments from a pool of actin monomers bound to profilin. However, both the nucleation and barbed end capping activities of AtFH19 are less efficient compared to those of another well-characterized formin, AtFH1. Interestingly, AtFH19 FH1FH2 competes with AtFH1 FH1FH2 in binding actin filament barbed ends, and inhibits the effect of AtFH1 FH1FH2 on actin. We thus propose a mechanism in which two quantitatively different formins coordinate to regulate actin dynamics by competing for actin filament barbed ends.     

Purification and characterization of a Ca2+-dependent actin filament severing protein from bovine adrenal medulla

We describe the purification of an actin regulatory protein from bovine adrenal medulla. This protein caused a dose-dependent decrease of the specific viscosity of actin solution within 30 s of its addition in a Ca2+-sensitive way. Sedimentation assays and the observation by electron microscopy showed that this effect was ascribable to the fragmentation of actin filaments. This protein apparently promoted nucleation of actin polymerization and increased the critical concentration of actin for polymerization nearly 5-fold, suggesting its binding to the barbed end of actin filaments. The inhibitory effect of this protein on the elongation of actin from the barbed end of the myosin subfragment S1-labeled actin seeds confirmed this suggestion. These properties are similar to those of gelsolin. However, the physicochemical properties of this protein having a single polypeptide chain with a molecular weight of 74,000, a Stokes radius of 3.9 nm, a sedimentation coefficient (s0(20),w) of 4.5 S, and an immunological characterization showed that this protein is different from gelsolin.     

Interaction of plasma gelsolin with G-actin and F-actin in the presence and absence of calcium ions

Plasma gelsolin formed a very tight 1:2 complex with G-actin in the presence of Ca2+, but no interaction between gelsolin and G-actin was detected in the presence of excess EGTA. However, the 1:2 complex dissociated into a 1:1 gelsolin:actin complex and monomeric actin when excess EGTA was added. Plasma gelsolin bound tightly to the barbed ends of actin filaments and also severed filaments in the presence of Ca2+ and bound weakly to the filament barbed end in the presence of EGTA. The 1:2 gelsolin-actin complex bound to the barbed ends of filaments but did not sever them. By blocking the barbed end of filaments with plasma gelsolin, we determined the critical concentration at the pointed end in 1 mM MgCl2 and 0.2 mM ATP to be 4 microM. The dissociation rate constant for ADP-G-actin from the pointed end was estimated to be about 0.4 s-1 and the association rate constant to be about 5 X 10(4) M-1 s-1. Finally, we obtained evidence that plasma gelsolin accelerates but does not bypass the nucleation step and, therefore, that the concentration of gelsolin does not directly determine the concentration of filaments polymerized in its presence. Thus, gelsolin-capped filaments may not provide an absolutely reliable method for determining the rate constant for the association of ATP-G-actin at the pointed ends of filaments, but a reasonable estimate would be 1 X 10(5) M-1 s-1 in 1 mM MgCl2 and 0.2 mM ATP.     

Identification of a polyphosphoinositide-modulated domain in gelsolin which binds to the sides of actin filaments

Gelsolin is a Ca2+- and polyphosphoinositide-modulated actin-binding protein which severs actin filaments, nucleates actin assembly, and caps the "barbed" end of actin filaments. Proteolytic cleavage analysis of human plasma gelsolin has shown that the NH2-terminal half of the molecule severs actin filaments almost as effectively as native gelsolin in a Ca2+-insensitive but polyphosphoinositide-inhibited manner. Further proteolysis of the NH2-terminal half generates two unique fragments (CT14N and CT28N), which have minimal severing activity. Under physiological salt conditions, CT14N binds monomeric actin coupled to Sepharose but CT28N does not. In this paper, we show that CT28N binds stoichiometrically and with high affinity to actin subunits in filaments, suggesting that it preferentially recognizes the conformation of polymerized actin. Analysis of the binding data shows that actin filaments have one class of CT28N binding sites with Kd = 2.0 X 10(-7) M, which saturates at a CT28N/actin subunit ratio of 0.8. Binding of CT28N to actin filaments is inhibited by phosphatidylinositol 4,5-bisphosphate micelles. In contrast, neither CT14N nor another actin-binding domain located in the COOH-terminal half of gelsolin form stable stoichiometric complexes with actin along the filaments, and their binding to actin monomers is not inhibited by PIP2. Based on these observations, we propose that CT28N is the polyphosphoinositide-regulated actin-binding domain which allows gelsolin to bind to actin subunits within a filament before serving.     

Dynamics of capping protein and actin assembly in vitro: uncapping barbed ends by polyphosphoinositides

Bursts of actin polymerization in vivo involve the transient appearance of free barbed ends. To determine how rapidly barbed ends might appear and how long they might remain free in vivo, we studied the kinetics of capping protein, the major barbed end capper, binding to barbed ends in vitro. First, the off-rate constant for capping protein leaving a barbed end is slow, predicting a half-life for a capped barbed end of approximately 30 min. This half-life implies that cells cannot wait for capping protein to spontaneously dissociate from capped barbed ends in order to create free barbed ends. However, we find that phosphatidylinositol 4,5-bisphosphate (PIP2) and phosphatidylinositol 4- mono-phosphate (PIP) cause rapid and efficient dissociation of capping protein from capped filaments. PIP2 is a strong candidate for a second messenger regulating actin polymerization; therefore, the ability of PIP2 to remove capping protein from barbed ends is a potential mechanism for stimulating actin polymerization in vivo. Second, the on- rate constant for capping protein binding to free barbed ends predicts that actin filaments could grow to the length of filaments observed in vivo during one lifetime. Third, capping protein beta-subunit isoforms did not differ in their actin binding properties, even in tests with different actin isoforms. A major hypothesis for why capping protein beta-subunit isoforms exist is thereby excluded. Fourth, the proposed capping protein regulators, Hsc70 and S100, had no effect on capping protein binding to actin in vitro.     

Gelsolin as a calcium-regulated actin filament-capping protein.

Various concentrations of gelsolin (25-100 nM) were added to 2 microM polymerized actin. The concentrations of free calcium were adjusted to 0.05-1.5 microM by EGTA/Ca2+ buffer. Following addition of gelsolin actin depolymerization was observed that was caused by dissociation of actin subunits from the pointed ends of treadmilling actin filaments and inhibition by gelsolin of polymerization at barbed ends. The time course of depolymerization revealed an initial lag phase that was followed by slow decrease of the concentration of polymeric actin to reach the final steady state polymer and monomer concentration. The initial lag phase was pronounced at low free calcium and low gelsolin concentrations. On the basis of quantitative analysis the kinetics of depolymerization could be interpreted as capping, i.e. binding of gelsolin to the barbed ends of actin filaments and subsequent inhibition of polymerization, rather than severing. The main argument for this conclusion was that even gelsolin concentrations (100 nM) that exceed the concentration of filament ends ( approximately 2 nM), cause the filaments to depolymerize at a rate that is similar to the rate of depolymerization of the concentration of pointed ends existing before addition of gelsolin. The rate of capping is directly proportional to the free calcium concentration. These experiments demonstrate that at micromolar and submicromolar free calcium concentrations gelsolin acts as a calcium-regulated capping protein but not as an actin filament severing protein, and that the calcium binding sites of gelsolin which regulate the various functions of gelsolin (capping, severing and monomer binding), differ in their calcium affinity.     

Effect of the structure of the N terminus of tropomyosin on tropomodulin function

Tropomodulins (Tmod) bind to the N terminus of tropomyosin and cap the pointed end of actin filaments. Tropomyosin alone also inhibits the rate of actin depolymerization at the pointed end of filaments. Here we have defined 1) the structural requirements of the N terminus of tropomyosin important for regulating the pointed end alone and with erythrocyte Tmod (Tmod1), and 2) the Tmod1 subdomains required for binding to tropomyosin and for regulating the pointed end. Changes in pyrene-actin fluorescence during polymerization and depolymerization were measured with actin filaments blocked at the barbed end with gelsolin. Three tropomyosin isoforms differently influence pointed end dynamics. Recombinant TM5a, a short non-muscle alpha-tropomyosin, inhibited depolymerization. Recombinant (unacetylated) TM2 and N-acetylated striated muscle TM (stTM), long alpha-tropomyosin isoforms with the same N-terminal sequence, different from TM5a, also inhibited depolymerization but were less effective than TM5a. All blocked the pointed end with Tmod1 in the order of effectiveness TM5a >stTM >TM2, showing the importance of the N-terminal sequence and modification. Tmod1-(1-344), lacking the C-terminal 15 residues, did not nucleate polymerization but blocked the pointed end with all three tropomyosin isoforms as does a shorter fragment, Tmod1-(1-92), lacking the C-terminal "capping" domain though higher concentrations were required. An even shorter fragment, Tmod1-(1-48), bound tropomyosin but did not influence actin filament elongation. Tropomyosin-Tmod may function to locally regulate cytoskeletal dynamics in cells by stabilizing actin filaments.     

Caenorhabditis elegans gelsolin-like protein 1 is a novel actin filament-severing protein with four gelsolin-like repeats

The gelsolin family of proteins is a major class of actin regulatory proteins that sever, cap, and nucleate actin filaments in a calcium-dependent manner and are involved in various cellular processes. Typically, gelsolin-related proteins have three or six repeats of gelsolin-like (G) domain, and each domain plays a distinct role in severing, capping, and nucleation. The Caenorhabditis elegans gelsolin-like protein-1 (gsnl-1) gene encodes an unconventional gelsolin-related protein with four G domains. Sequence alignment suggests that GSNL-1 lacks two G domains that are equivalent to fourth and fifth G domains of gelsolin. In vitro, GSNL-1 severed actin filaments and capped the barbed end in a calcium-dependent manner. However, unlike gelsolin, GSNL-1 remained bound to the side of F-actin with a submicromolar affinity and did not nucleate actin polymerization, although it bound to G-actin with high affinity. These results indicate that GSNL-1 is a novel member of the gelsolin family of actin regulatory proteins and provide new insight into functional diversity and evolution of gelsolin-related proteins.     

Molecular cloning of human macrophage capping protein cDNA. A unique member of the gelsolin/villin family expressed primarily in macrophages.

Macrophage capping protein (MCP) is a Ca(2+)-sensitive protein which reversibly blocks the barbed ends of actin filaments but does not sever preformed actin filaments. The human cDNA for MCP has been cloned and sequenced. The derived amino acid sequence predicts a polypeptide of 38.4 kDa. Human MCP expressed in Escherichia coli using a pET12a vector was functionally identical to the native protein purified from rabbit alveolar macrophages with respect to Ca2+ sensitivity and ability to block monomer exchange at the barbed end of actin filaments. Sequence comparison with other actin-binding protein sequences indicates that MCP is a member of the gelsolin/villin family of barbed end blocking proteins. Unlike gelsolin, this protein has a limited tissue distribution being detected primarily in macrophages where it was abundant, representing 0.9-1% of the total cytoplasmic protein. Northern blot analysis of U937 and HL60 cells differentiated to macrophage-like cells demonstrated that MCP message increases to 2.6 and greater than 7 times initial levels, respectively. Human MCP displays a 93% amino acid sequence identity with two recently described mouse proteins, gCap39 and Mbh1. Its abundance in macrophages and the corresponding increases in mRNA levels upon promyelocyte and monocyte development into macrophages indicate that MCP may play an important role in macrophage function.     

Coordinated regulation of platelet actin filament barbed ends by gelsolin and capping protein

Exposure of cryptic actin filament fast growing ends (barbed ends) initiates actin polymerization in stimulated human and mouse platelets. Gelsolin amplifies platelet actin assembly by severing F-actin and increasing the number of barbed ends. Actin filaments in stimulated platelets from transgenic gelsolin-null mice elongate their actin without severing. F-actin barbed end capping activity persists in human platelet extracts, depleted of gelsolin, and the heterodimeric capping protein (CP) accounts for this residual activity. 35% of the approximately 5 microM CP is associated with the insoluble actin cytoskeleton of the resting platelet. Since resting platelets have an F- actin barbed end concentration of approximately 0.5 microM, sufficient CP is bound to cap these ends. CP is released from OG-permeabilized platelets by treatment with phosphatidylinositol 4,5-bisphosphate or through activation of the thrombin receptor. However, the fraction of CP bound to the actin cytoskeleton of thrombin-stimulated mouse and human platelets increases rapidly to approximately 60% within 30 s. In resting platelets from transgenic mice lacking gelsolin, which have 33% more F-actin than gelsolin-positive cells, there is a corresponding increase in the amount of CP associated with the resting cytoskeleton but no change with stimulation. These findings demonstrate an interaction between the two major F-actin barbed end capping proteins of the platelet: gelsolin-dependent severing produces barbed ends that are capped by CP. Phosphatidylinositol 4,5-bisphosphate release of gelsolin and CP from platelet cytoskeleton provides a mechanism for mediating barbed end exposure. After actin assembly, CP reassociates with the new actin cytoskeleton.     

Microscopic evidence that actin-interacting protein 1 actively disassembles actin-depolymerizing factor/Cofilin-bound actin filaments

Actin-depolymerizing factor (ADF)/cofilin and gelsolin are the two major factors to enhance actin filament disassembly. Actin-interacting protein 1 (AIP1) enhances fragmentation of ADF/cofilin-bound filaments and caps the barbed ends. However, the mechanism by which AIP1 disassembles ADF/cofilin-bound filaments is not clearly understood. Here, we directly observed the effects of these proteins on filamentous actin by fluorescence microscopy and gained novel insight into the function of ADF/cofilin and AIP1. ADF/cofilin severed filaments and AIP1 strongly enhanced disassembly at nanomolar concentrations. However, gelsolin, gelsolin-actin complex, or cytochalasin D did not enhance disassembly by ADF/cofilin, suggesting that the strong activity of AIP1 cannot be explained by simple barbed end capping. Barbed end capping by ADF/cofilin and AIP1 was weak and allowed filament elongation, whereas gelsolin or gelsolin-actin complex strongly capped and inhibited elongation. These results suggest that AIP has an active role in filament severing or depolymerization and that ADF/cofilin and AIP1 are distinct from gelsolin in modulating filament elongation.     

Chimeric and truncated gCap39 elucidate the requirements for actin filament severing and end capping by the gelsolin family of proteins.

gCap39 is an actin filament end-capping protein which has a threefold repeated domain structure similar to the N-terminal half of gelsolin. However, unlike gelsolin, gCap39 does not sever actin filaments and dissociates completely from filament ends after calcium removal. We have capitalized on these differences to explore the structural basis for actin filament capping, severing, and their regulation. Using truncated gCap39, generated by limited proteolysis or deletion mutagenesis, we found that actin filament capping requires multiple gCap domains, and almost the entire molecule is necessary for optimal activity. gCap39 domain I, like the equivalent domain in gelsolin, contains an actin monomer binding site. gCap39 domains II-III are, however, different from gelsolin in that they do not bind to the side of actin filaments. Since filament side binding is hypothesized to be the first step in severing, lack of side binding may explain why gCap39 does not sever. This is confirmed directly by swapping gCap39 domains II-III for the side-binding gelsolin domains to generate a chimera which severs actin filaments. The chimera is Ca2+ independent in actin filament severing and capping, although gCap39 domain I itself is regulated by Ca2+.     

Capping complex formation at the slow-growing end of the actin filament

Actin filaments are polar; their barbed (fast-growing) and pointed (slow-growing) ends differ in structure and dynamic properties. The slow-growing end is regulated by tropomodulins, a family of capping proteins that require tropomyosins for optimal function. There are four tropomodulin isoforms; their distributions vary depending on tissue type and change during development. The C-terminal half of tropomodulin contains one compact domain represented by alternating α-helices and β-structures. The tropomyosin-independent actin-capping site is located at the C-terminus. The N-terminal half has no regular structure; however, it contains a tropomyosin-dependent actin-capping site and two tropomyosin-binding sites. One tropomodulin molecule can bind two tropomyosin molecules. Effectiveness of tropomodulin binding to tropomyosin depends on the tropomyosin isoform. Regulation of tropomodulin binding at the pointed end as well as capping effectiveness in the presence of specific tropomyosins may affect formation of local cytoskeleton and dynamics of actin filaments in cells.     

Vinculin Is a Dually Regulated Actin Filament Barbed End-capping and Side-binding Protein

The focal adhesion protein vinculin is an actin-binding protein involved in the mechanical coupling between the actin cytoskeleton and the extracellular matrix. An autoinhibitory interaction between the N-terminal head (Vh) and the C-terminal tail (Vt) of vinculin masks an actin filament side-binding domain in Vt. The binding of several proteins to Vh disrupts this intramolecular interaction and exposes the actin filament side-binding domain. Here, by combining kinetic assays and microscopy observations, we show that Vt inhibits actin polymerization by blocking the barbed ends of actin filaments. In low salt conditions, Vt nucleates actin filaments capped at their barbed ends. We determined that the interaction between vinculin and the barbed end is characterized by slow association and dissociation rate constants. This barbed end capping activity requires C-terminal amino acids of Vt that are dispensable for actin filament side binding. Like the side-binding domain, the capping domain of vinculin is masked by an autoinhibitory interaction between Vh and Vt. In contrast to the side-binding domain, the capping domain is not unmasked by the binding of a talin domain to Vh and requires the dissociation of an additional autoinhibitory interaction. Finally, we show that vinculin and the formin mDia1, which is involved in the processive elongation of actin filaments in focal adhesions, compete for actin filament barbed ends.     

Interaction of actin with the capping protein, CapZ from sea bass (Dicentrarchus labrax) white skeletal muscle

We have compared the functional properties of CapZ from fish white skeletal muscle with those of CapZ from chicken muscle. CapZ is a heterodimer, which enhances actin nucleation and inhibits the depolymerization process by binding to the barbed ends of microfilaments. Here, we report the interaction of CapZ not only with F-actin, but also with monomeric actin. The affinity of sea bass CapZ for G-actin estimated by enzyme-linked immunosorbent assay (ELISA) was in the μM range. This association was PIP₂ dependent. Binding contacts with the barbed end of actin were delimited by both ELISA and fluorescence approaches. One site (actin sequence 338–348) was located in a helical region of the subdomain 1, region already implicated in the interaction with other actin binding proteins such as gelsolin. Another site implicates the C-terminal region (sequence 360–372) of actin. Finally, the partial competition of antibodies directed against CapZ α or β-subunits towards CapZ interaction with actin filaments suggests both subunits participate in the complex with actin.     

Comparison between the gelsolin and adseverin domain structure.

Adseverin (74-kDa protein, scinderin) is a calcium- and phospholipid-modulated actin-binding protein that promotes actin polymerization, severs actin filaments, and caps the barbed end of the actin filament, with its NH2-terminal half retaining these properties (Sakurai, T., Kurokawa, H., and Nonomura, Y. (1991) J. Biol. Chem. 266, 4581-4585). Further proteolysis of this NH2-terminal half generated five fragments, and two of them (Mr 15,000 and 31,000) showed Ca(2+)-dependent binding to monomeric actin. The Mr 31,000 fragment especially caused actin filament fragmentation, although its severing activity was also inhibited by several acidic phospholipids as was found in adseverin and its NH2-terminal half. Amino acid sequencing demonstrated that the two fragments' NH2 terminus were blocked in the same manner as the NH2 terminus of adseverin, and thus these two fragments are possibly located at the NH2-terminal of the adseverin molecule. This would then indicate that NH2-terminal fragments had a Ca(2+)-sensitive actin-binding function that relates to actin severing. The other two fragments' NH2-terminal sequencing showed a similar homology to the amino acid sequences of gelsolin and villin. Based on these observations, we propose that adseverin has a functional domain structure similar to that of the gelsolin and villin core.     

Arabidopsis VILLIN1 generates actin filament cables that are resistant to depolymerization

Dynamic cytoplasmic streaming, organelle positioning, and nuclear migration use molecular tracks generated from actin filaments arrayed into higher-order structures like actin cables and bundles. How these arrays are formed and stabilized against cellular depolymerizing forces remains an open question. Villin and fimbrin are the best characterized actin-filament bundling or cross-linking proteins in plants and each is encoded by a multigene family of five members in Arabidopsis thaliana. The related villins and gelsolins are conserved proteins that are constructed from a core of six homologous gelsolin domains. Gelsolin is a calcium-regulated actin filament severing, nucleating and barbed end capping factor. Villin has a seventh domain at its C terminus, the villin headpiece, which can bind to an actin filament, conferring the ability to crosslink or bundle actin filaments. Many, but not all, villins retain the ability to sever, nucleate, and cap filaments. Here we have identified a putative calcium-insensitive villin isoform through comparison of sequence alignments between human gelsolin and plant villins with x-ray crystallography data for vertebrate gelsolin. VILLIN1 (VLN1) has the least well-conserved type 1 and type 2 calcium binding sites among the Arabidopsis VILLIN isoforms. Recombinant VLN1 binds to actin filaments with high affinity (K(d) approximately 1 microM) and generates bundled filament networks; both properties are independent of the free Ca(2+) concentration. Unlike human plasma gelsolin, VLN1 does not nucleate the assembly of filaments from monomer, does not block the polymerization of profilin-actin onto barbed ends, and does not stimulate depolymerization or sever preexisting filaments. In kinetic assays with ADF/cofilin, villin appears to bind first to growing filaments and protects filaments against ADF-mediated depolymerization. We propose that VLN1 is a major regulator of the formation and stability of actin filament bundles in plant cells and that it functions to maintain the cable network even in the presence of stimuli that result in depolymerization of other actin arrays.