Chemiluminescence Emission during Reactions between Superoxide and Selected Aliphatic and Aromatic Halocarbons in Aprotic Media

The reactions between superoxide free radical anion (.O⁻₂) with the halocarbons CCl₄, CHCl₃, BrCH₂CH₂Br(EDB), decachloro-biphenyl (DCBP), and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) in dimethyl sulphoxide (DMSO) results in the emission of chemiluminescence (CL). The chemiluminescence reactions are characterized as having biphasic second order kinetics, CL wavelengths between 350 nm and 650 nm, and exhibiting perturbation by chemicals reactive with singlet oxygen. These data suggest that singlet oxygen species are the excited state responsible for the light emissions. Polarographic studies confirm .O⁻₂ consumption and halide release in the reactions, while gas liquid chromatography and NBT reduction demonstrate the decomposition of the halocarbons into products. A chemiluminescent reaction mechanism is proposed involving reductive dehalogenation of the halocarbons and the generation of singlet oxygen. The significance of singlet oxygen generation is discussed with respect to a general mechanism for explaining the rapid initiation of lipid peroxidative membrane damage in halocarbon toxigenicity in animal and plant tissues.     

Enhanced chemiluminescence of cerium(IV)–Tween 85 system and the analytical application

The oxidation reaction between cerium(IV) and Tween 85 in sulfuric acid medium produced weak chemiluminescence (CL). In this paper, it was found that citrate could strongly enhance the CL of cerium(IV)–Tween 85–polyphenol system. Based on studies of ultraviolet–visible spectra and CL spectra, the CL enhancement mechanism had been proposed. It was surmised that the light emission was from an excited oxygen molecular pair O₂(¹Δ_g)O₂(¹∑_g^–). The maximum emission wavelength was about 478 nm. The effects of 17 amino acids and 29 organic compounds on cerium(IV)–Tween 85–citrate CL were investigated by a flow injection procedure. This study showed the present system had a wide application for the determination of these compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Two Processes Responsible for Chemiluminescence Development in the Course of Iron-Mediated Lipid Peroxidation

The kinetics of chemiluminescence (CL) accompanying Fe²⁺-induced lipid peroxidation (LPO) in liposome suspension has been investigated. A sequence of stages was observed, namely: (1) fast CL flash (FF); (2) latent period (LP); (3) slow CL flash (SF) and (4) stationary chemiluminescence (SL). The first three stages are known to reflect the Fe²⁺-mediated LPO process. In spite of the fact that at the stage of SL Fe²⁺ has completely oxidized and MDA has not accumulated, CL intensity was found to increase and after 0.5–1 h reached a value that was several times higher than SF amplitude. The maximal SL level was linearly dependent on the initial Fe²⁺ concentration and was not dependent on liposome concentration in the suspension. The nature of the processes responsible for CL emission at the stage of SL has been investigated using free radical reaction inhibitors and measurement of CL spectra. The SL spectrum was observed in the red region (λ>590 nm) in contrast to the SF CL spectrum (maximum at 540 nm). SL amplitude was strongly inhibited by sodium azide (40%), superoxide dismutase (SOD) (30%), desferrioxamine and EDTA (30%), whereas mannitol, ethanol, α-tocopherol and butylated hydroxytoluene were ineffective. The data obtained indicate that CL at the stage of SL is not directly related to LPO process, i.e. lipid free radical recombination. The mechanism of stationary CL generation is discussed.     

Chemiluminescence investigations of antioxidative activities of some antibiotics against superoxide anion radical

A chemiluminescent technique was applied to determine antioxidative activities of adriamycin, farmorubicin, mitomycin C and bleomycin against superoxide anion radical (O₂^?) in aprotic medium. The antioxidant capacity was expressed as the decrease in light emission from the O₂^? solution by and antibiotic. A KO₂ solution in dimethyl sulphoxide (DMSO) and 18‐crown‐6 ether were used for the generation of O₂^?. The results showed that the examined compounds decreased the chemiluminescence (CL) sum from the O₂^?‐generating system in a dose‐dependent manner. Among the antibiotics examined, adriamycin, farmorubicin and bleomycin exhibited antioxidant activity almost comparable to that of 1,2‐dihydroxy benzene‐3,5‐disulphonic acid (tiron), an efficient of the O₂^? inhibitor. Mitomycin C was two‐times less effective as tiron in decreasing the initial CL intensity. The proposed assay with usage of ultraweak CL technique and the KO₂–DMSO–crown ether system was useful for the evaluation of antioxidant activity in aprotic solvents. Copyright © 2011 John Wiley & Sons, Ltd.     

Chemiluminescence in the reaction of cytochrome c with hydrogen peroxide

(1) Aqueous solutions of 1–10 μM ferricytochrome c treated with 100 μM–100 mM H₂O₂ at pH 8.0 emit chemiluminescence with quantum yield $\text{Ф ? 10}{}^{\mathrm{?9}}$ and absolute maximum intensity $\text{I}{}_{\mathrm{<mtext>max</mtext>}}\text{? 10}{}^5\text{hv/}\text{s}$ per cm³ (λ = 440), and exhibit exponential decay with a rate constant of 0.15 s^?1. (2) The emission spectrum of the chemiluminescence covers the range 380–620 nm with the maximum at 460 ± 10 nm. (3) Neither cytochrome c nor haemin fluoresce in the spectral region of the chemiluminescence. In the reaction course with H₂O₂, a weak fluorescence in the region 400–620 nm with λ_max = 465–510 nm (λ_exc 315–430 nm) gradually arises. This originates from tryptophan oxidation products of the formylkynurenine type or from imidazole derivatives, respectively. (4) Frozen solutions (77 K) of cytochrome c exhibit phosphorescence typical of tryptophan (λ_exc = 280 nm, λ_em = 450 nm). During the peroxidation, an additional phosphorescence gradually appears in the range 480–620 nm with λ_max = 530 nm (λ_exc = 340 nm). This originates from oxidative degradation products of tryptophan. (5) There are no red bands in the chemiluminescence spectra of cytochrome c or haemin. This result suggests that singlet molecular oxygen $\text{O}{}_2\text{(}{}^1\text{Δ}{}_{\mathrm{<mtext>g</mtext>}}\text{)}$ is not involved in either peroxidation or chemiluminescence. (6) The haem Fe³⁺ group and H₂O₂ appear to be crucial for the chemiluminescence. It is suggested that the generation of electronically excited, light-emitting states is coupled to the production of conformational out-of-equilibrium states of peroxy-Fe-protoporphyrin IX compounds.     

Synthesis and photoluminescence of EuII in barium zinc orthosilicate: a novel green color emitting phosphor for white‐LEDs

A series of Eu²⁺‐activated barium orthosilicates (BaZnSiO₄) were synthesized using a high‐temperature solid‐state reaction. A photoluminescence excitation study of Eu²⁺ shows a broad absorption band in the range of 270–450 nm, with multiple absorption peak maxima (310, 350 and 400 nm) due to 4f–5d electronic transition. The emission spectra of all the compositions show green color emission (in the spectral region 450–550 nm with a peak maximum at 502 nm and a shoulder at ~ 490 nm) with appropriate Comission Internationale de l'Eclairage (CIE) color coordinates. The two emission peaks are due to the presence of Eu²⁺ in two different Ba sites in the BaZnSiO₄ host lattice. The energy transfers between the Eu²⁺ ions in BaZnSiO₄ host are elucidated from the critical concentration quenching data based on the electronic multipolar interaction. All Eu²⁺‐activated BaZnSiO₄ phosphor materials can be efficiently excited in the ultraviolet (UV) to near UV‐region (270–420 nm), making them attractive candidate as a green phosphor for solid state lighting–white light‐emitting diodes.     

Luminescence studies of a Li2Ca1−xSiO4:xSm3+ phosphor for the generation of white light under NUV-excited phosphor converting LEDs

In this paper, we present new aspects of Sm³⁺-doped pure Li₂CaSiO₄ as a suitable candidate for white light emitting diode (WLED) applications. The samples were mainly prepared using a conventional modified solid-state synthesis technique. The structural studies were done using X-ray diffraction and Rietveld refinement. Instruments such as a scanning electron microscope (SEM) were used to obtain information about the morphology of the as-prepared samples. Photoluminescence (PL) analysis of phosphor samples for variable concentrations of doping ions with variable excitations were presented. When doped with Sm³⁺ in host Li₂CaSiO₄ it emitted intense blue, green and red emissions and a more intense red emission peak (605 nm) under 408 nm excitation (near-UV–blue). Our study shows that the as-prepared phosphor may be useful for optical devices and mainly for WLEDs. The corresponding transitions of doping ions and concentration quenching effect were studied in detail. The 1931 Commission Internationale de l'Eclairage (x, y) chromaticity coordinates showed the distribution of spectral regions calculated from PL emission spectra and this was found (0.63, 0.36) in the red region, so the phosphor may be useful for near-UV–blue excited WLED applications.     

Photoluminescence,cathodoluminescence and thermal stability of Sm3+‐activated Sr3La(VO4)3 red‐emitting phosphors

A series of Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors were synthesized by a facile sol‐gel method. X‐ray diffraction patterns and photoluminescence (PL)/cathodoluminescence (CL) spectra as well as PL decay curves were employed to characterize the obtained samples. Upon 402 nm light excitation, the characteristic emissions of Sm³⁺ ions corresponding to ⁴G_5/2→⁶H_J transitions were observed in all the as‐prepared products. The PL emission intensity was increased with increase in Sm³⁺ ion concentration, while concentration quenching occurred when the doping concentration was over 4 mol%. The non‐radiative energy transfer mechanism for concentration quenching of Sm³⁺ ions was dominated by dipole–dipole interaction and the critical distance was around 21.59 Å. Furthermore, temperature‐dependent PL emission spectra revealed that the obtained phosphors possessed good thermal stability with an activation energy of 0.19 eV. In addition, the CL spectra of the samples were almost the same as the PL spectra, and the CL emission intensity showed a tendency to increase with increase in accelerating voltage and filament current. These results suggest that the Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors with good color coordinates, high color purity and superior thermal stability may be a potential candidate for applications in white light‐emitting diodes and field‐emission displays as red‐emitting phosphors.     

Eco-friendly nonconjugated polymer dots for chemiluminometric determination of 4-nitrophenol

Polymer dots (PDs) are a new family of quantum dots for which their behavior and potential applications have not yet been completely explored. In this study, nonconjugated PDs were synthesized using a simple pyrolysis method and used for the chemiluminescence (CL) assay of 4-nitrophenol (4-NP). PDs increased the CL signal of the Ce(IV)–Na₂SO₃ reaction 39-fold. Using the CL spectrum, it was concluded that the emission at 434 nm was generated by excited PDs (PDs*), which are produced by energy transfer from SO₂* to PDs. Our experiments showed that 4-NP enhanced the CL signal of the Ce(IV)–Na₂SO₃–PDs reaction. The mechanism of this effect was explored by obtaining CL, ultraviolet–visible, and Fourier transform infrared spectra. Due to the high sensitivity and selectivity of the CL system for 4-NP, a probe was designed to determine 4-NP in the linear range 1.0–500 nmol/L with a detection limit of 0.33 nmol/L. Different spiked real samples were successfully analyzed using this probe.     

Chemiluminescence from luminol solution after illumination of a 355 nm pulse laser

Chemiluminescence (CL) on the time scale of microseconds to milliseconds from luminol solution after illumination of a 355 nm pulse laser is reported. It was found that the CL is the emission from 3‐aminophthalate ion (AP*). In CL decay after the pulse laser illumination, a peak was observed from about 200 to 30 µs depending on the laser power and the luminol concentration. It seemed that there was a fast and slow decay process; their kinetics were greatly dependent on the laser power and the luminol concentration. Dissolved oxygen was involved in the CL and played the same role on the whole time scale of microseconds to milliseconds. Involvement of reactive oxygen species such as H₂O₂, ¹O₂, O₂^?? and OH in the CL was examined by adding their scavengers. Experimental results suggested that the possibility of involvement of H₂O₂ and ¹O₂ in the CL was low. The CL in time periods less than 50 µs might be related to ?OH. The ^?O₂^??‐induced CL increased with time after 50 µs and became dominant on the time scale of milliseconds. The CL was considered to be caused by both the photoionization and type I reaction mechanisms. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence associated with amino acid oxidation mediated by hypochlorous acid

Although most amino acids readily react with hypochlorous acid (HOCl), only the reaction involving tryptophan (Trp) produces a measurable chemiluminescence (CL). Most of this luminescence takes place after total consumption of HOCl when the process is carried out in an excess of Trp. The quantum yield of the process is relatively low (2 × 10^?8 Einstein/mol HOCl reacted). The luminescence is attributed to free radical‐mediated secondary reactions of the initially produced chloramines. This is supported by experiments showing that the chloramines produced when HOCl reacts with alanine are able to induce Trp chemiluminescence, and that this luminescence is partially quenched by free radical scavengers. The spectral changes and the effect of pH upon the observed luminescence are compatible with light emission from products produced in the free radical oxidation of Trp. Copyright © 2002 John Wiley & Sons, Ltd.     

Near infrared emission of singlet oxygen generated in the dark

Singlet oxygen generation is reported from (1) enzymatic reaction and (2) electron transfer reactions of the superoxide anion measured directly with an ultrasensitive near-IR emission spectrophotometer by monitoring the O₂(¹Δ_g) → O₂ (³Σ_g^?) transition at 1268 nm. Near-IR emission spectra from the myeloperoxidase and lactoperoxidase enzymatic systems show only emission of singlet oxygen at 1268nm. The lipoxygenase/Na–linoleate enzymatic reaction exhibits two emissions, 1268 nm and 1288 nm. The latter emission is identified as originating from a peroxy radical. Spectral and kinetic data giving evidence of singlet oxygen generation is obtained from the reaction of potassium superoxide solubilized by 18-crown-6-ether in acetonitrile with a series of organometallic coordination compounds.     

Mechanism of alcohol‐enhanced lucigenin chemiluminescence in alkaline solution

The chemiluminescence (CL) of lucigenin (Luc²⁺) can be enhanced by different alcohols in alkaline solution. The effect of different fatty alcohols on the CL of lucigenin was related to the carbon chain length and the number of hydroxyl groups. Glycerol provides the greatest enhancement. UV/Vis absorption spectra and fluorescence spectra showed that N‐methylacridone (NMA) was produced in the CL reaction in the presence of different alcohols. The peak of the CL spectrum was located at 470 nm in all cases, indicating that the luminophore was always the excited‐state NMA. The quenching of lucigenin CL by superoxide dismutase (SOD) and the electron spin resonance (ESR) results with the spin trap of 5,5‐dimethyl‐1‐pyrroline N‐oxide (DMPO) demonstrated that superoxide anions (O₂^?–) were generated from dissolved oxygen in the CL reaction and that glycerol and dihydroxyacetone (DHA) can promote O₂^?? production by the reduction of dissolved oxygen in alkaline solution. It was assumed that the enhancement provided by different alcohols was related to the solvent effect and reducing capacity. Glycerol and DHA can also reduce Luc²⁺ into lucigenin cation radicals (Luc^?+), which react with O₂^?? to produce CL, and glycerol can slowly transform into DHA, which is oxidized quickly in alkaline solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Myeloperoxidase-Based Chemiluminescence of Polymorphonuclear Leukocytes and Monocytes

Luminol and lucigenin chemiluminescence (CL) responses produced by separated human blood polymorphonuclear leukocytes (pmn) and monocytes (mono) have been studied following stimulation with the surface-receptor agonist fMLP (a synthetic chemotactic peptide) and the protein kinase C activator phorbol myristate acetate (PMA). Pmn produced two- to threefold the luminol CL and superoxide anion (O₂⁻) levels of mono; lucigenin CL was similar for both cell-types. The myeloperoxidase (MPO) inhibitor salicylhydroxamic acid (SHA) abrogated luminol but not lucigenin CL in both cell types, but did not further inhibit the already grossly subnormal luminol CL responses seen with MPO-deficient cells which produced normal lucigenin CL. SHA also profoundly inhibited the luminol CL response in a cell-free MPO–H₂O₂ system. Mono lucigenin CL does not appear to specifically measure O₂⁻ production. These data show that luminol CL provides a useful measure of pmn and also mono MPO activity. However, analysis of the effects of various reactive oxygen species (ROS) scavengers, assessed on phagocyte and cell-free CL systems (both MPO–H₂O₂ and superoxide generating) suggest that the luminol CL signal is not entirely dependent on MPO activity.     

Enhancement of chemiluminescence of the KIO4–luminol system by gallic acid,acetaldehyde and Mn2+: application for the determination of catecholamines

Chemiluminescence (CL) from the oxidation of luminol with potassium periodate in strong alkaline solutions was greatly enhanced by the combined effect of gallic acid, acetaldehyde and Mn²⁺. The CL spectra exhibited only one emission band at 425 nm, indicating 3‐aminophthalate as the emitting species. Various scavengers for superoxide anion, hydroxyl radical and singlet oxygen quenched the CL emission very efficiently (74–100%), suggesting the possible involvement of these reactive oxygen species (ROS) in the CL reactions. It is postulated that oxidation of gallic acid and acetaldehyde by periodate catalyzed by Mn²⁺ generates these ROS, which then react with luminol to enhance the CL emission. We also found that the enhanced CL emission was strongly inhibited by catecholamines, probably because of their effective scavenging of ROS. Based on this observation, a simple, rapid and sensitive new CL method was developed for the determination of catecholamines. The detection limits (3σ) for dopamine, l‐ dopa, norepinephrine and epinephrine were 0.63, 1.37, 0.56 and 14.3 nmol/L, respectively. The linear range was 1–10 nmol/L; relative standard deviations were 0.71–1.34% for 0.1 µmol/mL catecholamines. This CL method was applied to the determination of catecholamines in pharmaceutical injections with satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Red emissive ternary europium complexes: synthesis,optical, and luminescence characteristics

Solid ternary europium complexes consisting of fluorinated β-diketone (thenoyltrifluoroacetone, TTFA) and heteroaromatic bidentate auxiliary ligands were synthesized. The luminescence features of the complexes were estimated using various spectral measurements and clearly proved that the Eu³⁺ ion is efficiently sensitized by ligands by an antenna effect. Photoluminescence excitation spectra have shown that Eu(III) complexes are excited effectively in the ultraviolet (UV) region and the corresponding emission spectra consist of characteristic peaks attributed to the ⁵D₀→⁷F_J transitions of the europium ion with the strongest emission peak at 611 nm (⁵D₀→⁷F₂). From photoluminescence (PL) data, decay time, Judd–Ofelt parameters, transition rates, and quantum efficiency of the complexes were also determined. The Commission Internationale de l'éclairage (CIE) colour coordinates indicated the bright red emission of ternary europium complexes. Correlated colour temperature values indicated the utilization of these complexes in display devices. Judd–Ofelt and photophysical parameters were also estimated theoretically using LUMPAC software. Various frontier molecular orbitals and their respective energy were determined. These red emissive europium complexes could be utilized for fabricating solid-state lighting systems.     

Analysis of methylparaben in cosmetics based on a chemiluminescence H2O2−NaIO4−CNQDs system

In this article, a simple, effective chemiluminescence (CL) method for the detection of methylparaben (MP) in cosmetic samples was developed based on an IO₄^?–H₂O₂–carbon nitrogen quantum dots (CNQDs) system without a separation process. The results indicated that the redox reaction between periodate and hydrogen peroxide released hydroxide radicals and superoxide radical anions in the presence of bicarbonate. These two radicals were responsible for the formation of excited luminophor CNQD* with a maximum wavelength at 480 nm. Due to the competitive reaction with hydroxide radicals, CL intensity was markedly diminished in the presence of MP. The relative standard deviation in the intraday assay was below 5.5% (n = 9), and the detection limit was as low as 0.50 μmol/L. The proposed method allowed for the successful, selective determination of MP in cosmetics.     

Photoluminescence properties of a novel phosphor CaB2O4:Eu3+ under NUV excitation

The new borate phosphor CaB₂O₄:Eu³⁺ was synthesized by solid‐state method and their photoluminescence properties were investigated. The results show that the pure phase of CaB₂O₄ could be available at 900°C, CaB₂O₄:Eu³⁺ phosphor could be effectively excited by the near ultraviolet light (NUV) (392 nm), and the luminescent intensity of CaB₂O₄:Eu³⁺ phosphor reached to the highest when the doped‐Eu³⁺ content was 4 mol%. The emission spectra of CaB₂O₄:Eu³⁺ phosphor could exhibit red emission at 612 nm and orange emission at 588 nm, which are ascribed to the ⁵D₀–⁷F₂ and ⁵D₀–⁷F₁ transitions of Eu³⁺ ions. Copyright © 2009 John Wiley & Sons, Ltd.     

Luminescence characterization of KBaPO4:RE (RE = Sm3+,Eu3+,Dy3+) phosphors

KBaPO₄ luminescent powdered phosphors doped with rare earth elements (RE = Sm³⁺,Eu³⁺,Dy³⁺) were successfully synthesized using a wet chemical method to identify the most suitable phosphor for solid‐state lighting based on the measurement of their emission spectra at excitation wavelengths. The X‐ray diffraction pattern of the as‐prepared KBaPO₄ was well matched with its standard JCPDS file no. 330996, indicating the formation of the desired compound. Scanning electron microscopy images revealed irregular morphology, the material crystallized particles aggregated and were non‐uniform with particle sizes ranging from 1 to 100 μm. Photoluminescence excitation and emission spectra clearly indicated that the phosphor containing the Sm³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 403 nm and exhibited an emission mainly including two wavelength peaks at 559 nm and 597 nm. The phosphor containing the Eu³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 396 nm and exhibited a bright red emission mainly including two wavelength peaks at 594 nm and 617 nm. The phosphor containing the Dy³⁺‐activated KBaPO₄ phosphors could be efficiently excited at 349 nm and exhibited wavelength peaks at 474 nm and 570 nm.     

Comparison of chemiluminescence from luminol solution and luminol–TiO2 suspension after illumination of a 355 nm pulse laser

Chemiluminescence (CL) from luminol solution and luminol–TiO₂ suspension after illumination of a 355 nm pulse laser is compared. Both the CL systems showed the CL spectra with maximum wavelength of 430 nm, suggesting that the emission was from the excite state of 3‐aminophthalate ion. The TiO₂ photocatalytically induced luminol CL could be separately detected either when the pulse laser power was smaller than 0.15 mJ/pulse or a slit was placed beyond ?2–2 mm in the vertical direction of the laser beam. The TiO₂ photocatalytically induced luminol CL intensity was linear to the laser power, while that of the 355 nm pulse laser‐induced was nonlinear. A log–log plot between the 355 nm pulse laser‐induced luminol CL intensity and laser power showed a near‐linear regression fit with a slope of 2.11, suggesting that a two‐photon absorption process of luminol was present in the 355 nm pulse laser‐induced luminol CL. Adsorbed oxygen on the surface of TiO₂ seemed to greatly contribute to the photocatalytically induced CL. Copyright © 2010 John Wiley & Sons, Ltd.