A two-intermediate model for imidazole-promoted peroxyoxalate chemiluminescence

A mechanism is proposed for imidazole-catalysed peroxyoxalate chemiluminescence. The reaction model includes a sequential formation of 1-aroxalylimidazole and 1,1′-oxalyldiimidazole as light-producing reaction intermediates. The suggestion is supported by the kinetic data obtained for the reaction of imidazole with bis(4-nitrophenyl) oxalate and on the recently reported ability of 1,1′-oxalyldiimidazole to function as an efficient chemiluminescence reagent. The relative contributions of different catalytic pathways and hydrolytic side-reactions are discussed © 1997 John Wiley & Sons, Ltd.     

Amines for detection of dopamine by generation of hydrogen peroxide and peroxyoxalate chemiluminescence

A range of nitrogen-containing compounds (alkyl amines, piperazines, cyclohexylamines and nitrogen heterocyclics) were investigated for generation of hydrogen peroxide from dopamine and detection by peroxyoxalate chemiluminescence. Imidazole, ethyleneurea and allantoin among the nitrogen heterocyclic compounds tested generated hydrogen peroxide from dopamine following incubation at 60°C, pH 9.5–10.5, for 0–30 min. Imidazole was the most effective for generation of hydrogen peroxide, but imidazole derivatives with a primary amine side chain (histamine) or thiol (ethylenethiourea) were not effective. The presence of a ketone group (ethyleneurea, allantoin) did not hinder the reaction. Under optimal conditions (30 min incubation, 50 mmol/L imidazole) 10.5 nmol of dopamine could be detected. The cyclohexylamines tested produced low amounts of hydrogen peroxide (0.09–2.74% of light intensity with imidazole), and the piperazines and the alkyl amines tested produced no detectable hydrogen peroxide. Imidazole reacts with the phenolic groups of dopamine in a different manner from monoamine oxidase, and a reagent containing imidazole, ethyleneurea or allantoin was useful for non-enzymatic detection of dopamine by peroxyoxalate chemiluminescence.© John Wiley & Sons, Ltd.     

On the mechanism of peroxyoxalate chemiluminescence. Quenched chemiluminescence as a detection method in HPLC

Several analytes such as the inorganic anions bromide, iodide, sulphite and nitrite and organic compounds as substituted anilines and sulphur compounds cause quenching of peroxyoxalate chemiluminescence. A detection method for liquid chromatography based on the quenching phenomenon has been developed. It makes use of an immobilized luminophore, i.e. 3-aminofluoranthene covalently bound via an alkyl-spacer on controlled pore glass, packed in the detector cell. The mechanism behind the quenching has been elucidated by investigating the roles of luminophores (both in the liquid and in solid state) and oxalates in peroxylate CL with respect to quenchers. Most probably the quencher destroys the radical ion pair produced after electron transfer in the last stage of the CIEEL reaction scheme, thus preventing the formation of electronically excited luminophore.     

Determination of aromatic compounds by high-performance liquid chromatography with on-line photoreactor and peroxyoxalate chemiluminescence detection.

This paper describes a novel high-performance liquid chromatographic (HPLC) method for the determination of aromatic compounds with peroxyoxalate chemiluminescence (PO-CL ) detection following on-line UV irradiation. Aromatic compounds were UV irradiated (254 nm, 15 W) to generate hydrogen peroxide, which was determined via PO-CL detection using a mixture of bis(2,4,6-trichlorophenyl)oxalate (aryloxalate) and 2,4,6,8-tetrathiomorpholinopyrimido[5,4-d]pyrimidine (fluorophore) as a post-column CL reagent. Generation of hydrogen peroxide from aromatic compounds was confirmed using a flow injection analysis (FIA) system incorporating an enzyme column reactor immobilized with catalase. The conditions for UV irradiation were optimized using benzene and monosubstituted benzenes (phenol, benzaldehyde, nitrobenzene and N,N-dimethylaniline) by an HPLC system to evaluate the analytical performance of the proposed system. The detection limits for benzene and monosubstituted benzenes were in the range 2.1-124 pmol/injection at signal:noise (S:N) ratio = 3. Monocyclic and polycyclic hydrocarbons were also employed to investigate their CL properties. The possibility of PO-CL detection for a wide variety of aromatic compounds was shown for the first time.     

Kinetic studies on the peroxyoxalate chemiluminescence reaction: determination of the cyclization rate constant

Although more currently utilized as analytical tool because of its high sensitivity and good reproducibility, the mechanism of the peroxyoxalate system, a chemiluminescence reaction with quantum yields only comparable to bioluminescence systems, has been extensively studied. The light emission mechanism can be divided in the pathway before chemiexcitation, which contains the rate‐limiting steps, and the fast and kinetically non‐observable chemiexcitation step. In this work, we obtain information on the mechanism of the slow pathways, attribute values to several rate constants prior to chemiexcitation and suggest a mechanistic scheme that could help optimization of conditions when the peroxyoxalate reaction is used as analytical tool. Copyright © 2002 John Wiley & Sons, Ltd.     

Unprecedented chemiluminescence behaviour during peroxyoxalate chemiluminescence of oxalates with fluorescent or electron-donating aryloxy groups.

A series of diaryl and bis(4-styrylphenyl) oxalates with electron-donating substituents or fluorescent moieties were subjected to the peroxyoxalate chemiluminescence (PO-CL) reaction, some of which were found to behave in a unprecedented manner. The reaction of bis(p-methyoxyphenyl) oxalate, as a representative example, emits light due not only to the emission from the externally added excited fluorophore, but also from the presumable excimer of p-methoxyphenol. Also, during the reaction of the bis(4-styrylphenyl) oxalates, the emission based on the fluorescence as well as the excimer of the eliminating group were observed. These experimental results suggest that such emitting species would be formed by an intra- and intermolecular electronic interaction with a high-energy intermediate, such as a dioxetanone.     

Determination of serum oxalate using peroxyoxalate chemiluminescence of free oxalic acid

We describe a new sensitive and specific method for determination of oxalate in human serum. By using the chemiluminescence decay of monoperoxyoxalic acid very low concentrations of oxalate (200 nmol/L) can be determined. The mean serum oxalate level in apparently healthy controls was 14.5 ± 8.5 m?mol/L. Supplementation of ascorbic acid leads to an increase in serum oxalate level. While serum oxalate concentrations of calcium oxalate stone formers (x = 16.4 ± 9.8 m?mol/L) are not significantly different from the control group, an extreme increase of serum oxalate is evident in haemodialysis patients. The serum oxalate concentration decreased during dialysis treatment from 141.4 ± 32.1 m?mol/L to 36.4 ± 12.7 m?mol/L.     

Non‐enzymatic aqueous peroxyoxalate chemiluminescence immune detection using a CCD camera and a CMOS device

A new method for non‐enzymatic aqueous peroxyoxalate chemiluminescence (POCL) biomolecular detection using imaging chip‐based devices has been developed. A water‐soluble amide of oxalic acid was synthesized and used in the investigation and characterization of POCL immunodetection in an aqueous environment. Six fluorescent dyes commonly used in biological detection were tested, and the intensity of light generated from the aqueous POCL reactions was characterized in the liquid phase. Direct detection sensitivity comparisons between a standard fluorescent method and this POCL method were performed in both liquid and solid phases. Results showed that detection sensitivity using the POCL method is comparable to that of the fluorescent method. POCL biomolecular detection on a nitrocellulose membrane was also investigated using a charge‐coupled device (CCD) camera. Again, POCL detection sensitivity proved to be comparable to that using the fluorescent detection method. In an application of aqueous POCL biomolecular detection, Staphylococcus aureus enterotoxin B (SEB) and its antibody were used to demonstrate immuno‐ and affinity detection. For further applications, such as DNA and protein arrays, simultaneous detection of biomolecules labelled with different fluorescent labels was investigated, using a complementary metal oxide semiconductor (CMOS) colour imaging chip. Copyright © 2008 John Wiley & Sons, Ltd.     

Detection of substances with alcoholic or phenolic hydroxyl groups by generation of hydrogen peroxide with imidazole and peroxyoxalate chemiluminescence

On-line detection of substances with an alcoholic or phenolic hydroxyl group using imidazole and peroxyoxalate chemiluminescence was investigated qualitatively using a flow-injection method. The substances tested included six polyphenols, five monophenols and six sugars. After incubation at 80°C with an imidazole buffer (pH 9.5) the substances were detected by peroxyoxalate chemiluminescence. The polyphenols tested (e.g., pyrogallol, purpurogallin, and dopamine) showed the strongest light emission. The sugars with hydroxyl groups (e.g., fructose and lactose) and the monophenols (e.g., phenol, serotonin, and β-estradiol) produced only a weak light emission. Reaction of hydroxyl compounds and imidazole generated hydrogen peroxide. Imidazole served two roles, it catalysed the reaction with the hydroxyl compound and initiated peroxyoxalate chemiluminescence on-line. A novel reactor formed by packing glass beads into a flow cell (Teflon) of a chemiluminometer improved the sensitivity of light detection.     

Peroxyoxalate chemiluminescence enhanced by oligophenylenevinylene fluorophores in the presence of various surfactants

The effect of several surfactants on peroxyoxalate chemiluminescence (PO‐CL) using oligophenylenevinylene fluorophores was investigated. Among several oligophenylenevinylenes consisting of stilbene units, linearly conjugated ones, such as distyrylbenzene and distyrylstilbene, effectively enhanced PO‐CL efficiency. Various effects of anionic, cationic, amphoteric and non‐ionic surfactants on the CL efficiency of PO‐CL were determined using three oxalates and the distyrylbenzene fluorophore. Anionic and non‐ionic surfactants effectively enhanced CL efficiency, in contrast to the negative effect of cationic and amphoteric surfactants. Non‐ionic surfactants were also effective in CL reactions of oxalates bearing dodecyl ester groups by the hydrophobic interaction between their alkyl chains. Considering these results, the surfactants not only increase the concentrations of water‐insoluble interacting species in the hydrophobic micelle cores, but also control rapid degradation of the oxalates by alkaline hydrolysis. Copyright © 2014 John Wiley & Sons, Ltd.     

A lab‐on‐a‐chip device for analysis of amlodipine in biological fluids using peroxyoxalate chemiluminescence system

A highly sensitive, rapid and economical method for the determination of amlodipine (AM) in biological fluids was developed using a peroxyoxalate chemiluminescence (CL) system in a lab‐on‐a‐chip device. Peroxyoxalate‐CL is an indirect type of CL that allows the detection of native fluorophores or compounds derivatized with fluorescent labels. Here, fluorescamine was reacted with AM, and the derivatization product was used in a bis‐(2,4,6‐trichlorophenyl)oxalate‐CL system. Fluorescamine reacts selectively with aliphatic primary amine at neutral or basic pH. As most of the calcium channel blocker and many cardiovascular drugs do not contain primary amine, the developed method is highly selective. The parameters that influenced the CL signal intensity were studied carefully. These included the chip geometry, pH, concentration of reagents used and flow rates. Moreover, we confirmed our previous observation about the effects of imidazole, which is commonly used in the bis‐(2,4,6‐trichlorophenyl)oxalate‐CL system as a catalyst, and found that the signal was significantly improved when imidazole was absent. Under optimized conditions, a calibration curve was obtained with a linear range (10–100 µg/L). The limit of detection was 3 µg/L, while the limit of quantification was 10 µg/L. Finally the method was applied for the determination of AM in biological fluids successfully. Copyright © 2014 John Wiley & Sons, Ltd.     

Sensitive flow-injection method with peroxyoxalate chemiluminescence detection combined with preparative high-performance liquid chromatography for determination of choline-containing phospholipids in human serum

A sensitive and rapid flow-injection analysis (FIA) of total choline-containing phospholipids (PLs) and a selective FIA method for the class assay of choline-containing PLs combined with preparative HPLC were described. The FIA method is based on peroxyoxaxalate chemiluminescence (PO-CL) detection of hydrogen peroxide enzymatically formed from choline-containing PL. The linear standard curves were obtained up to 1 nmol/20-μl injection (r>0.999) with the detection limits of 1.3–1.6 pmol at a signal-to-noise ratio of 2. The total amounts of choline-containing PLs in human serum were ranged from 1.63 to 3.19 mg/ml. The HPLC separation of choline-containing PLs was achieved with an aminopropyl-modified silica gel column using a mixture of acetonitrile-methanol-10 mM ammonium phosphate buffer pH 5.8 as eluent. The eluate corresponding to each choline-containing PL was collected, evaporated, dissolved in 0.1% Triton X-100 aqueous solution, and then injected into FIA system. The FIA method combined with preparative HPLC was applied to the assay of human serum.     

Response surface optimized peroxyoxalate chemiluminescence of octahydro‐Schiff base derivative as new luminophor and study of the quenching effect of some cations,amino acids and cholesterol

We report the first detailed study of the characteristics of an octahydro‐Schiff base derivative as a new luminophor in the peroxyoxalate chemiluminescence (POCL) system. The effect of reagents on this new POCL system was investigated. In addition, the response surface methodology was used for evaluating the relative significance of variables in this POCL system, establishing models and determining optimal conditions. The quenching effect of some cations and compounds such as Cu²⁺, Fe³⁺, Hg²⁺, imidazole, histidine and cholesterol on an optimized POCL reaction were studied. The dynamic ranges were up to approximaterly 100 and 175 × 10^?6 M for Cu²⁺ and cholesterol respectively. The detection limits were 3.3 × 10^?6 m and 2.58 × 10^?6 m for Cu²⁺ and histidine, respectively. In all cases the relative standard deviations were 4–5% (n = 4). Copyright © 2014 John Wiley & Sons, Ltd.     

Development of a novel capillary electrophoresis chemiluminescence system for amino acid analysis

In the present study, a novel peroxyoxalate CE–CL system was developed to achieve high signal stability and sensitivity based on a design of a new interface including a new mixing mode and a new grounding electrode mode. Amino acids fluorescently tagged with dansyl chloride and naphthalene‐2,3‐dicarboxaldehyde(NDA) were used for the study. Experiment results show this new system is quite effective to separate and detect amine acid with high stability and resolute. The detection limits were 1.1 nmol/L for dansyl‐leucine (Leu) and 2.0 nmol/L for dansyl‐aspartic acid (Asp). The relative standard deviations of peak height and migration time were in the ranges of 2.3–3.8% and 1.2–1.5%, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Electrophoresis–chemiluminescence detection of phenols catalyzed by hemin

Based on the catalytic activity of hemin, an efficient biocatalyst, an indirect capillary electrophoresis–chemiluminescence (CE‐CL) detection method for phenols using a hemin–luminol–hydrogen peroxide system was developed. Through a series of static injection experiments, hemin was found to perform best in a neutral solution rather than an acidic or alkaline medium. Although halide ions such as Br^? and F^? could further enhance the CL signal catalyzed by hemin, it is difficult to apply these conditions to this CE‐CL detection system because of the self‐polymerization of hemin, as it hinders the CE process. The addition of concentrated ammonium hydroxide to an aqueous/dimethyl sulfoxide solution of hemin–luminol afforded a stable CE‐CL baseline. The indirect CE‐CL detection of five phenols using this method gave the following limits of detections: 4.8 × 10^?8 mol/L (o‐sec‐butylphenol), 4.9 × 10^?8 mol/L (o‐cresol), 5.4 × 10^?8 mol/L (m‐cresol), 5.3 × 10^?8 mol/L (2,4‐dichlorophenol) and 7.1 × 10^?8 mol/L (phenol). Copyright © 2013 John Wiley & Sons, Ltd.     

Studies on the chemiexcitation step in peroxyoxalate chemiluminescence using steroid‐substituted activators

The peroxyoxalate reaction is utilized in a wide variety of analytical applications; however, its mechanism is still not very well understood, especially with respect to the excitation step, where the ‘chemical energy’ is transformed into ‘excitation energy’. This base‐catalysed reaction of activated oxalic phenyl esters with hydrogen peroxide in the presence of highly fluorescent aromatic hydrocarbons with low oxidation potentials is the only known chemiluminescence system for which exists experimental evidence for the occurrence of the intermolecular chemically initiated electron exchange luminescence (CIEEL) mechanism of proven high efficiency for excited state formation. We report here the singlet quantum yields and relative rate constants of the excitation step (k_CAT/k_D), obtained in the peroxyoxalate reaction, utilizing steroid‐substituted oxazolinylidenes as activators. In agreement with the CIEEL mechanism, a linear correlation of ln(k_CAT/k_D) with the oxidation potential of the activators is obtained, and the singlet quantum yields can be rationalized in terms of the free energy balance of the back electron transfer, leading to the formation of the activator's excited state. Thus, these results contribute to the experimental validation of the widely employed, thus still controversial, CIEEL mechanism. Copyright © 2002 John Wiley & Sons, Ltd.     

Hybridization of horseradish peroxidase-labeled probes and detection by enhanced chemiluminescence

This article describes the use of probes directly labeled with horseradish peroxidase in conjunction with enhanced chemiluminescence, which allows a flexible approach to hybridizations and detections. This system may be used with the following applications: Southern blots, Northern blots, colony and plaque screening for positive clones, YAC clone screening, and PCR products detection. The major steps required for the use of directly labeled HRP probes are hybridization, stringent washes, and detection.     

Comparison of the performance of the borax buffer-based HRP-enhanced reagent and the ‘Lumi-Phos 530’ chemiluminescence systems in the detection of biotinylated DNA

A comparison of two chemiluminescence methods, the borax buffer-based HRP-enhanced reagent and Lumi-Phos 530, applied to the detection of a biotinylated 30-mer DNA slot blotted onto a nylon membrane, is presented. A streptavidin–HRP and streptavidin–ALP mediated detection system was used. The HRP-enhanced system is up to 15-fold greater with respect to the signal/background ratios than the Lumi-Phos 530 system at 0.5 μg biotinylated DNA with at least a two-fold improvement in detection sensitivity for 0.5 ng biotinylated DNA.     

Determination of vitamin B6 using an optimized novel TCPO–indolizine–H2O2 chemiluminescence system

Indolizine derivatives are of great interest as fluorescent emitters for peroxyoxalate chemiluminescence. The reaction of peroxyoxalates such as bis‐(2,4,6‐trichlorophenyl) oxalate (TCPO) with H₂O₂ can transfer energy to fluorescer via the formation of dioxetanedione intermediate. Four indolizine derivatives were used as a novel fluorescer in the chemiluminescence (CL) systems in this study. The relationship between CL intensity and the concentration of fluorescer, peroxyoxalate, sodium salicylate and hydrogen peroxide was investigated. Optimum conditions were obtained for four fluorescers and it was found that the indolizine can be used as an efficient green fluorescence emitter. Vitamin B₆ induces a sharp decrease in the CL intensity of the TCPO–hydrogen peroxide–sodium salicylate system. A simple, rapid and sensitive CL method for the determination of vitamin B₆ has been developed. The results showed a linear relationship between vitamin B₆ concentration and peroxyoxalate CL intensity in the range 7.0 × 10⁻⁸–1.0 × 10⁻⁴. A detection limit of 2.3 × 10⁻⁸ M and relative standard deviation (RSD) of < 4.5% were obtained. Copyright © 2014 John Wiley & Sons, Ltd.     

Ozone-3,6-dihydroxynaphtha-2,7-disulphonate chemiluminescence system is used for online ozone detection

The chemiluminescence (CL) reaction between ozone and 3,6-dihydroxynaphtha-2,7-disulphonate (DNDS) was found under alkaline conditions. Therefore, a novel CL system for ozone detection was established. The CL signal of the CL system is weak, and the CL signal is enhanced by adding nonionic surfactants. It was found that adding 16.4 g/l Triton X-100 can enhance the CL signal. The CL reagent activated by ultraviolet (UV) light produced a CL signal was nearly 10 times stronger than the CL reagent not activated by UV light; the CL signal was enhanced by adding 8 g/l NaHCO₃ to the CL reagent irradiated by UV light. Through the optimization of these test conditions, a high-selectivity, high-sensitivity online detection method for ozone CL was established. The linear range was 0.5–150 ppbv, and the limit of detection (LOD) was 0.092 ppbv (S/N = 3).