New tools for the genetic manipulation of filamentous fungi

Filamentous fungi have a long-standing tradition as industrial producers of primary and secondary metabolites. Initially, industrial scientists selected production strains from natural isolates that fulfilled both microbiological and technical requirements for economical production processes. Subsequently, genetically modified strains with novel properties were obtained through traditional strain improvement programs relying mostly on random mutagenesis. In recent years, however, recombinant technologies have contributed significantly to improve the capacities of production and have also allowed the design of genetically manipulated strains. These major advances were only made possible by basic research bringing deeper and novel insights into cellular and molecular fungal processes, thus allowing the design of genetically manipulated strains. This better understanding of fundamental genetic processes in model organisms has resulted in the design and generation of new experimental transformation strategies to manipulate specifically gene expression and function in diverse filamentous fungi, including those having a biotechnical significance. In this review, we summarize recent developments in the application of homologous DNA recombination and RNA interference to manipulate fungal recipients for further improvement of physiology and development in regards to biotechnical and pharmaceutical applications.     

Characterization and manipulation of the Pseudomonas aeruginosa dimethylarginine dimethylaminohydrolase monomer--dimer equilibrium

In mammals, the enzyme dimethylarginine dimethylaminohydrolase (DDAH) is implicated in the regulation of the cellular levels of asymmetric methylarginines, small molecule metabolites that themselves represent a family of endogenous inhibitors of nitric oxide synthase (NOS). The involvement of DDAH function in the regulation of NOS makes this enzyme a potentially attractive therapeutic target. DDAH from the bacterium Pseudomonas aeruginosa (PaDDAH) is so far the only structurally tractable homologue of mammalian DDAH isoforms. To complement the recent crystal structure of this protein, we show by hydrodynamic measurements that PaDDAH exists in dynamic equilibrium between monomer (ca 29 kDa) and symmetric homodimer (ca 58 kDa) states with a dimer dissociation constant, K(d) approximately 500nM. For the purposes of NMR-based approaches to the study of this enzyme's interactions with substrate and inhibitor ligands, it would be useful to obtain the protein in monomeric form. Through detailed analysis of the homodimer PaDDAH crystal structure we identified key residues involved in the protomer-protomer interface and targeted these for mutation. The hydrodynamic and self-associative properties of a series of PaDDAH interface mutants were analyzed by concentration-dependent analytical size-exclusion chromatography and sedimentation equilibrium analytical ultracentrifugation. The individual substitution of several of the interface residues shifts the equilibrium position towards the monomer, which allowed the design of a double mutant variant (Arg40-->Glu, Arg98-->His) that behaves exclusively as a stable monomer, yet retains greater than 95% catalytic activity compared to wild-type. Comparative two-dimensional (1)H, (15)N heteronuclear NMR spectra indicate that the double mutant remains a monomer even at approximately 1 mM concentration. Accordingly, the double mutant PaDDAH is an attractive template for further NMR-based investigations of the enzyme mechanism and characterization of ligand-binding and inhibitor-binding profiles. These results indicate that dimerization of PaDDAH is not critical for the maintenance of the biological function of the protein. These results are discussed in the context of known modes of self-association between structurally related, but functionally distinct, members of the beta/alpha-propeller fold class.     

Nickel-resistance-based minitransposons: new tools for genetic manipulation of environmental bacteria

The ncc and nre nickel resistance determinants from Ralstonia eutropha-like strain 31A were used to construct mini-Tn5 transposons. Broad host expression of nickel resistance was observed for the nre minitransposons in members of the alpha, beta, and gamma subclasses of the Proteobacteria, while the ncc minitransposons expressed nickel resistance only in R. eutropha-like strains.     

Development of genetic tools for heterologous protein expression in a pentose-utilizing environmental isolate of Pseudomonas putida

Pseudomonas putida has emerged as a promising host for the conversion of biomass-derived sugars and aromatic intermediates into commercially relevant biofuels and bioproducts. Most of the strain development studies previously published have focused on P. putida KT2440, which has been engineered to produce a variety of non-native bioproducts. However, P. putida is not capable of metabolizing pentose sugars, which can constitute up to 25% of biomass hydrolysates. Related P. putida isolates that metabolize a larger fraction of biomass-derived carbon may be attractive as complementary hosts to P. putida KT2440. Here we describe genetic tool development for P. putida M2, a soil isolate that can metabolize pentose sugars. The functionality of five inducible promoter systems and 12 ribosome binding sites was assessed to regulate gene expression. The utility of these expression systems was confirmed by the production of indigoidine from C6 and C5 sugars. Chromosomal integration and expression of non-native genes was achieved by using chassis-independent recombinase-assisted genome engineering (CRAGE) for single-step gene integration of biosynthetic pathways directly into the genome of P. putida M2. These genetic tools provide a foundation to develop hosts complementary to P. putida KT2440 and expand the ability of this versatile microbial group to convert biomass to bioproducts.     

Development of experimental genetic tools for Campylobacter fetus

Molecular analysis of the virulence mechanisms of the emerging pathogen Campylobacter fetus has been hampered by the lack of genetic tools. We report the development and functional analysis of Escherichia coli-Campylobacter shuttle vectors that are appropriate for C. fetus. Some vectors were constructed based on the known Campylobacter coli plasmid pIP1455 replicon, which confers a wide host range in Campylobacter spp. Versatility in directing gene expression was achieved by introducing a strong C. fetus promoter. The constructions carry features necessary and sufficient to detect the expression of phenotypic markers, including molecular reporter genes in both subspecies of C. fetus, while retaining function in C. jejuni. The capacity to express several gene products from different vectors in a single host can be advantageous but requires distinct plasmid replicons. To this end, replication features derived from a cryptic plasmid of C. fetus subsp. venerealis strain 4111/108, designated pCFV108, were adapted for a compatible series of constructions. The substitution of the C. coli replication elements reduced vector size while apparently limiting the host range to C. fetus. The complementation of a ciprofloxacin-resistant mutant phenotype via vector-driven gyrA expression was verified. Cocultivation demonstrated that shuttle vectors based on the pCFV108 replicon were compatible with pIP1455 replication functions, and the stable maintenance of two plasmids in a C. fetus subsp. venerealis host over several months was observed. The application of both vector types will facilitate the investigation of the genetics and cellular interactions of the emerging pathogen C. fetus.     

Mini-D3112 bacteriophage transposable elements for genetic analysis of Pseudomonas aeruginosa.

Small bacteriophage D3112 transposable elements deleted for most of the phage-lytic functions while retaining the sites required for transposition and packaging were constructed to facilitate genetic studies in Pseudomonas aeruginosa. These mini-D derivatives were constructed with the terminal 1.85 kilobases (kb) of the phage left end and 1.4 kb of the phage right end and either the Tn5 kanamycin resistance or the pSC101 (pBR322) tetracycline resistance determinant. Thermally induced lysates of strains lysogenic for both a mini-D element and D3112 cts (temperature-sensitive repressor) transduced P. aeruginosa PAO recipients to drug resistance at frequencies of between 10(-4) and 10(-5)/PFU of the helper phage. As for the parent plaque-forming D3112 phage, the mini-D171 element could insert itself into many different sites in the chromosome but the frequency of insertion into particular genes varied widely. Among 1,000 insertions, none resulted in auxotrophy but 10 resulted in pigment production. Insertions were also selected in a cloning plasmid with a transduction scheme. At least eight different insertion sites were found to have been used among 10 individual insertions. Transductants harboring these mini-D elements were immune to infection by D3112, since they contained the D3112 repressor gene in the left 1.85-kb terminal fragment. Chromosomal genes were transduced in a generalized fashion 100 to 1,000 times more frequently by the mini-D-D3112 cts lysates than by the D3112 cts phage alone. Mini-D171-D3112 cts lysates also yielded some transductants that retained the drug resistance marker of the mini-D element and which were unstable for the chromosomal transduced marker. This is consistent with the miniduction properties of Mu whereby transduced genes are flanked by two mini-D elements in the same orientation.     

Development of a genetic tool for activating chromosomal expression of cryptic or tightly regulated loci in Pseudomonas aeruginosa

A method for replacing endogenous promoter by a constitutive promoter in Pseudomonas aeruginosa is described. Plasmid pKNG101, a broadly used shuttle suicide vector in P. aeruginosa, was improved to allow chromosomal introduction of a Plac promoter in front of any kind of gene especially those with unknown function. Using this strategy alleviates the need for cloning difficulties encountered in this bacteria and antibiotic marker selection.     

Population genetic analysis of Pseudomonas aeruginosa using multilocus sequence typing

To study the population genetic structure of Pseudomonas aeruginosa, we developed a multilocus sequence typing scheme. The sequences of internal fragments of seven housekeeping genes were obtained for 34 P. aeruginosa isolates from patients hospitalized in five different European cities. Twenty-six different allelic profiles were identified. The mean allelic diversity was 0.854 (range: 0.606-0.978), which was about six times greater than the results obtained with the multilocus enzyme electrophoresis method. Linkage disequilibrium was measured with the index of association. An index of 1.95+/-0.24 was calculated when all the strains were considered. This index was 1.76+/-0.27 when only one strain per sequence type was considered. Both results were different from 0, indicating linkage among loci, which means that the population structure of our set of P. aeruginosa isolates is clonal. The clonal structure of the population was also suggested by the congruence of the topology of the different trees obtained from the seven housekeeping genes. These results are in contrast to previous studies, finding a non clonal population structure. Since a small number of isolates was analyzed in this study, there might be a bias of selection which includes the possibility that they belong to widely disseminated epidemic clones. Another possibility is that recombination did not occurred homogeneously throughout the genome of P. aeruginosa, so that part of it has a clonal structure, while the remaining part of the genome is more frequently subject to recombination.     

A combined physical and genetic map of Pseudomonas aeruginosa PAO

A combined physical and genetic map of Pseudomonas aeruginosa PAO was constructed by pulsed-field gel electrophoresis and Southern hybridization using cosmid clones from a genomic library carrying known genes. A total of 37 SpeI restriction fragments have been mapped on the 5862 kb genome, and fragment contiguity demonstrated by hybridization with clones from a SpeI junction fragment library and fragments obtained by partial SpeI digestion, both derived from the P. aeruginosa PAO chromosome.     

Physical and genetic mapping of the catA region of Pseudomonas aeruginosa.

A prime plasmid has been used as the basis for the construction of a physical and genetic map of a 125 kb segment of the Pseudomonas aeruginosa PAO chromosome. Using pMO1811, a prime plasmid selected for the catA region, a series of Tn5 insertions were obtained which identified two new markers gcu (glycine utilization) and oap (organic acids and alcohols permeability) in the 125 kb region and located them in relation to other known markers of this region. A cosmid bank was constructed from the prime plasmid and an ordered array of cosmid clones for this region identified by restriction endonuclease mapping with EcoRI, HindIII and KpnI, as well as complementation mapping and chromosome walking. By Southern hybridization analyses, it was confirmed that the chromosomal insert carried by pMO1811 was flanked by single, tandemly arranged copies of IS21 and the orientation of the insert on this prime was determined. This cosmid bank provides a resource for the further analysis of this region of the P. aeruginosa genome.     

Molecular tools and emerging strategies for deep genetic/genomic refactoring of Pseudomonas

Modularization of different functional segments in plasmid vectors eases creation of genetic tools á la carte for Pseudomonas.

     

The genetic basis for the commitment to chronic versus acute infection in Pseudomonas aeruginosa

The opportunistic pathogen Pseudomonas aeruginosa causes both acute and chronic airway infections. In a recent issue of Developmental Cell, Goodman et al. (2004) show that the RetS two-component gene regulatory module inversely controls expression of genes associated with acute and chronic infection.     

Role of Mutation in Pseudomonas aeruginosa Biofilm Development

The survival of bacteria in nature is greatly enhanced by their ability to grow within surface-associated communities called biofilms. Commonly, biofilms generate proliferations of bacterial cells, called microcolonies, which are highly recalcitrant, 3-dimensional foci of bacterial growth. Microcolony growth is initiated by only a subpopulation of bacteria within biofilms, but processes responsible for this differentiation remain poorly understood. Under conditions of crowding and intense competition between bacteria within biofilms, microevolutionary processes such as mutation selection may be important for growth; however their influence on microcolony-based biofilm growth and architecture have not previously been explored. To study mutation in-situ within biofilms, we transformed Pseudomonas aeruginosa cells with a green fluorescent protein gene containing a +1 frameshift mutation. Transformed P. aeruginosa cells were non-fluorescent until a mutation causing reversion to the wildtype sequence occurs. Fluorescence-inducing mutations were observed in microcolony structures, but not in other biofilm cells, or in planktonic cultures of P. aeruginosa cells. Thus microcolonies may represent important foci for mutation and evolution within biofilms. We calculated that microcolony-specific increases in mutation frequency were at least 100-fold compared with planktonically grown cultures. We also observed that mutator phenotypes can enhance microcolony-based growth of P. aeruginosa cells. For P. aeruginosa strains defective in DNA fidelity and error repair, we found that microcolony initiation and growth was enhanced with increased mutation frequency of the organism. We suggest that microcolony-based growth can involve mutation and subsequent selection of mutants better adapted to grow on surfaces within crowded-cell environments. This model for biofilm growth is analogous to mutation selection that occurs during neoplastic progression and tumor development, and may help to explain why structural and genetic heterogeneity are characteristic features of bacterial biofilm populations.     

Animal models of chronic lung infection with Pseudomonas aeruginosa: useful tools for cystic fibrosis studies

Cystic fibrosis (CF) is caused by a defect in the transmembrane conductance regulator (CFTR) protein that functions as a chloride channel. Dysfunction of the CFTR protein results in salty sweat, pancreatic insufficiency, intestinal obstruction, male infertility and severe pulmonary disease. In most patients with CF life expectancy is limited due to a progressive loss of functional lung tissue. Early in life a persistent neutrophylic inflammation can be demonstrated in the airways. The cause of this inflammation, the role of CFTR and the cause of lung morbidity by different CF-specific bacteria, mostly Pseudomonas aeruginosa, are not well understood. The lack of an appropriate animal model with multi-organ pathology having the characteristics of the human form of CF has hampered our understanding of the pathobiology and chronic lung infections of the disease for many years. This review summarizes the main characteristics of CF and focuses on several available animal models that have been frequently used in CF research. A better understanding of the chronic lung infection caused particularly by P. aeruginosa, the pathophysiology of lung inflammation and the pathogenesis of lung disease necessitates animal models to understand CF, and to develop and improve treatment.     

Development of a latex agglutination method for the diagnosis of Pseudomonas aeruginosa infection

The present investigation has revealed the possibility of using different kinds of monodispersed polystyrene latex, produced in the USSR, as carriers in the process of the preparation of antibody diagnosticums intended for the detection of water-soluble slime antigens of Pseudomonas aeruginosa strains belonging to the most widespread serological types. The optimum conditions for the preparation of latex reagents and for making the latex-agglutination test have been experimentally established. The new diagnosticums+ have been shown to be highly species- and type-specific, which permits making judgment on the presence or absence of slime antigens of P. aeruginosa strains belonging to definite serovars in the clinical material under study. The preparations thus obtained have been found to retain their sensitivity for 16 months (the term of observation).     

Characterization and genetic mapping of fructose phosphotransferase mutations in Pseudomonas aeruginosa

Pseudomonas aeruginosa transports and phosphorylates fructose via a phosphoenolpyruvate-dependent fructose phosphotransferase system (PTS). Mutant strains deficient in both PTS activity and glucose-6-phosphate dehydrogenase activity were isolated and were used to select mannitol-utilizing revertant strains singly deficient in PTS activity. These mutants were unable to utilize fructose as a carbon source and failed to accumulate exogenously provided [14C]fructose, and crude cell extracts lacked phosphoenolpyruvate-dependent fructose PTS activity. Thus, the PTS was essential for the uptake and utilization of exogenously provided fructose by P. aeruginosa. Mutations at a locus designated pts, which resulted in a loss of PTS activity, exhibited 57% linkage to argF at 55 min on the chromosome in plasmid R68.45-mediated conjugational crosses. The pts mutations in four independently isolated mutant strains exhibited from 11 to 20% linkage to argF, and one of these mutations exhibited 3% linkage to lys-9015 in phage F116L-mediated transductional crosses.     

Genetic manipulation tools for Dietzia spp.

Aim: To develop an applicable vector system and a transformation method for the manipulation of Dietzia spp. Methods and Results: The pNV18 Nocardia‐E. coli shuttle vector was tested and found to be a replicating plasmid in Dietzia sp. E1. With the use of pNV18, an electroporation method was optimized for the transformation of Dietzia sp. E1, and a transformation efficiency suitable for genetic manipulations was achieved (2·18 × 10⁴ transformants μg^?1 DNA). The method was also applied for the transformation of Dietzia cinnamea, D. maris, D. natronolimnaea and D. psychralcaliphila. Conclusions: The first applicable vectors and a simple electroporation protocol enabling the manipulation of several Dietzia spp. are presented. Significance and Impact of the Study: Dietzia spp. have clinical, industrial and great environmental importance; however, the analysis of the Dietzia genus is currently hampered by the lack of manipulation techniques. The presented basic tools allow the genetic analysis of several Dietzia species, including the human disease‐associated Dietzia maris.