Age-related variability in occlusal wear planes

Investigation of two populations of 136 individuals shows several patterns of occlusal wear plane change which are positively correlated with age. For individuals up to the age of 18, there is a characteristic pattern in which the occlusal wear planes of the mandibular teeth are lingually sloped and those of the maxillary dentition buccally sloped, with the exception of the maxillary premolars, which are also lingually sloped. The long axes of the mandibular teeth give them a lingual orientation relative to the maxillary teeth, and the long axes of the maxillary molars, by contrast, are buccally oriented. In the 18-30 age range for all sexes, the mandibular M1 becomes buccally sloped on its occlusal surface while the occlusal wear plane on the maxillary M1 becomes lingually sloped. Later age changes indicate a trend for the mandibular premolars to become buccally sloped, while the wear planes of the maxillary premolars remain lingually sloped. There is a corresponding tendency for the maxillary and mandibular second molars to undergo changes in the initial orientation of the occlusal wear planes.     

Human tooth wear, tooth function and cultural variability

Among primitive peoples dental attrition appears to be a natural phenomenon. Often the degrees and kinds of tooth wear vary from population to population. This variability is possibly related to certain material aspects of culture such as diet, food preparation techniques and tool usage. In order to learn more about these relationships, extensive cross cultural comparisons must be made. This paper reports on a study of dental attrition among skeletal remains of North American Indians from three areas: California, the Southwest and the Valley of Mexico. A method of comparing worn teeth of these populations was devised so several characteristics of the teeth and supporting bone could be examined by population. This study showed significant differences in type and degree of wear among the three groups as well as differences between sexes within each population. A positive correlation between tooth wear and cultural factors was found. Dietary specialization and division of labor appear to be responsible for the degree and type of wear found in this sample. Further studies of this type are planned to expand the sample size and, if the new data support these correlations, valuable information about human–environmental relationships can be gained.     

Patterns of tooth size variability in the dentition of primates

Published data on tooth size in 48 species of non-human primates have been analyzed to determine patterns of variability in the primate dentition. Average coefficients of variation calculated for all species, with males and females combined, are greatest for teeth in the canine region. Incisors tend to be somewhat less variable, and cheek teeth are the least variable. Removing the effect of sexual dimorphism, by pooling coefficients of variation calculated for males and females separately, reduces canine variability but does not alter the basic pattern. Ontogenetic development and position in functional fields have been advanced to explain patterns of variability in the dentition, but neither of these appears to correlate well with patterns documented here. We tentatively suggest another explanation. Variability is inversely proportional to occlusal complexity of the teeth. This suggests that occlusal complexity places an important constraint on relative variability within the dentition. Even when the intensity of natural selection is equal at all tooth positions, teeth with complex occlusal patterns must still be less variable than those with simple occlusion in order to function equally well. Hence variability itself cannot be used to estimate the relative intensity of selection. Low variability of the central cheek teeth ( \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm M}\frac{1}{1} $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm M}\frac{2}{2} $\end{document}) makes them uniquely important for estimating body size in small samples, and for distinguishing closely related species in the fossil record.     

Tooth wear in Australian aboriginal populations from the River Murray Valley

The study of tooth wear among prehistoric and recent populations has frequently been concerned with the rate and pattern of wear over the dental arches. In this report we considered the question of tooth wear variation among collections of Australian Aboriginal crania recovered from several sites along the Murray River in Southeastern Australia. These crania represent the remains of relatively recent populations from about 2,000 years ago until the early 19th century. The degree of tooth wear for each dental arch was recorded by an established method of determining the ratio of exposed dentin. The pattern or distribution of wear over each arch was summarized by principal component analysis. The mean wear degree and pattern were compared among four geographical grouping of crania separated by up to 700 miles of river frontage. Our results showed, as expected, a significant difference between the well-defined population at the Lower Murray site (Swanport) and the three upriver groups. However, there were significant differences among these three collections as well. Sexual dimorphism was noted but was only significant in the Lower Murray group; the mean wear was greater and also more variable among the males. At the second of the Middle Murray sites the pattern of wear was different and the degree of wear was significantly less than in the other groups. A possible explanation for this diversity may be environmental and subsistence base differences. The evidence from the Lower Murray supports this possibility, but the differences among the other three groups are not as clearly established. However, our results do suggest that the Murray Black collection, from which these crania were obtained, may not be as homogeneous a group as previously believed.     

Brief communication: interproximal tooth wear: a new observation.

Microscopic observations were made of wear on the proximal surfaces of tooth crowns of Australian Aboriginals and whites. Typical wear facets displayed well-defined borders within which vertical or near vertical furrows, ranging from about 0.1 to 0.5 mm in width, were noted. Furrows on the interproximal surface of one tooth seemed to "interdigitate" with those on the proximal surface of the adjacent tooth. These observations are not consistent with the commonly-held view that interproximal tooth wear results from a buccolingual movement of adjacent teeth that maintain contact through mesial migration. Vertical or near vertical movement of teeth, possibly including a tipping action, must be an important factor, although the precise nature of the movement requires further investigation.     

Longitudinal study of dental arch relationships in Australian aboriginals with reference to alternate intercuspation

The patterns of age change in dental arch breadths and depths were studied longitudinally in Australian Aboriginals, 92 males and 68 females. Three types of change in relative arch dimensions were recognized: a divergent pattern in which the differences between maxillary and mandibular dimensions increased with age, a convergent pattern in which the differences decreased, and a parallel pattern in which the arch differences remained metrically stable. The feature that best distinguished the Aboriginals from Caucasian groups was the high frequency of subjects, 71% of males and 40% of females, who showed a divergent growth pattern. The association between divergent growth in arch breadths and the development of alternate intercuspation, which is characterized by an inability to occlude the teeth on both sides of the arch at the same time, is discussed.     

Dental use wear in extinct lemurs: evidence of diet and niche differentiation

A new technique for molar use-wear analysis is applied to samples of all 16 species of extinct lemurs with known dentitions, as well as to a large comparative sample of extant primates. This technique, which relies on the light refractive properties of wear pits and scratches as seen under a standard stereoscopic microscope, has shown itself to be effective in distinguishing the diets of ungulates and extant primates. We draw dietary inferences for each of the 16 extinct lemur species in our database. There is a strong phylogenetic signal, with the Palaeopropithecidae showing use-wear signatures similar to those of the Indriidae; extinct lemurids (Pachylemur spp.) showing striking similarities to extant lemurids (except Hapalemur spp.); and Megaladapis showing similarities to Lepilemur spp. Only the Archaeolemuridae have dietary signatures unlike those of any extant lemurs, with the partial exception of Daubentonia. We conclude that the Archaeolemuridae were hard-object feeders; the Palaeopropithecidae were seed predators, consuming a mixed diet of foliage and fruit to varying degrees; Pachylemur was a fruit-dominated mixed feeder, but not a seed predator; and all Megaladapis were leaf browsers. There is no molar use wear evidence that any of the extinct lemurs relied on terrestrial foods (C4 grasses, tubers, rhizomes). This has possible implications for the role of the disappearance of wooded habitats in the extinction of lemurs.     

A correlation of tooth wear and age among modern Igloolik eskimos.

The level of molar wear can be estimated reliably by measuring the cusp height. A correlation between age and the level of molar wear, expressed by a normalizing index (TWI) of cusp height, was found to exist in a sample of modern Igloolik Northwest Territories Eskimos. Not only was it possible to derive linear regression models to test the degree of correlation in the sample of 46 female and 39 male maxillary casts of Igloolik Eskimos, but the models were capable of accurately predicting the age of natives of the neighboring Hall Beach community. Sexual dimorphism in molar wear, perhaps attributable to differential bruxism, was demonstrated for the Igloolik sample. Based on the combined estimate of slopes for each maxillary molar pair for females and males, it was discovered that the male maxillary molars are worn approximately 30% more rapidly than female maxillary molars.     

Measurements of tooth wear among Australian aborigines: II. Intrapopulational variation in patterns of dental attrition

The possible implications of variations in dental attrition patterns have necessitated a detailed assessment of the types, ranges, and causes of tooth wear. Hear we employ measurements of postcanine occlusal wear facets from a sample population of extant Australian aborigines. A principal components analysis was applied as a tool in determining common types of attritional patterns. It was concluded that the range of intrapopulational variation in dental wear patterns must be attributed to a multiplicity of sources in addition to such commonly cited causes as dietary variations, gender, age, and developmental eruption sequences.     

Dental wear in the Libben population: Its functional pattern and role in the determination of adult skeletal age at death

Modal patterns of occlusal attrition are presented for the Libben population based on a sample of 332 adult dentitions. Maxillas and mandibles were reviewed independently by seriation prior to assessment of complete dentitions. The Spearman rank order coefficient for upper and lower dentitions was.96. Wear patterns are very similar to those reported by Murphy (1959a: Am. J. Phys. Anthropol. 17:167–178) for Australian aborigines. There were no significant sexual differences in wear rate. Dental wear is concluded to be a highly reliable and important indicator of adult age at death for skeletal populations if seriation procedures are employed.     

Dental variability of the Liberian chimpanzee,Pan troglodytes verus

Dental variability was studied in a collection of Liberian chimpanzee (Pan troglodytes verus) crania from one geographic area of Central Liberia. Morphological and metric data were compared to another population of the same subspecies studied by Schuman and Brace (1955) as well as to other pongid taxa. It appears that of all living pongids, chimpanzees are the most derived in their lower molar patterns, particularly, P. t. verus. It is clear, however that the mandibular molar patterns of contemporary chimpanzees are more similar to other pongids that to humans which is contra to the suggestions of Schuman and Brace. Hypocone reduction from M1 to M3 is the common pattern in all hominoids. Complete absence of the M3 hypocone is rare in pongids but it is present in the Frankfurt collection. Of living pongids, the gorilla expresses the least amount of hypocone reduction from M1 to M3. A cusp of Carabelli is recorded bilaterally in one P.t. verus. There is less odontometric variation in P.t. verus than in other pongids as indicated by the CV’s which may suggest the greater dental variability present when different geographic groups are included in the sample.     

Comparative genetic variance and heritability of dental occlusal variables in U.S. and Northwest Indian twins

Genetic variance analysis of 15 dental occlusal and arch variables is based on cross-cultural comparison of twin variances (U.S. Whites and Northwest Indian Punjabis). Both samples exhibit high genetic versus environmental partition of variance. However, monozygotes and dizygotes have unequal variance, which invalidates conventional genetic variance ratios. The pattern of environmental biases on the zygosities is quite different in the two groups. Revised estimates that acknowledge zygosity heterogeneity (hence unequal environmental influences) are generally much lower for occlusal traits, whereas arch size measurements are unaffected.     

A comparative study of tooth and dental arch dimensions in Jewish children of different ethnic descent. I. Kurds and Yemenites

Dental casts of 99 Kurdish and 98 Yemenite Jewish children evenly distributed between the sexes, aged 12 years, were measured for mesio-distal and buccolingual tooth dimensions, and arch depth and width. Dental dimensions showed significant differences between the two groups in certain permanent teeth in mesiodistal length, while in the buccolingual diameter the differences did not reach statistical significance. Dental arch form in Kurdish children was more rounded due to significantly bigger arch width, while arch depth was not significantly different from Yemenites. Intragroup sex differences were found in both groups with reference to arch dimensions, while in the dental parameters they were more strongly expressed in Kurdish children.     

The dentition of the Lengua Indians of Paraguay

The crown morphology of 202 dental casts from living Lengua Indians is described and compared with other Amerind, Melanesian, and Caucasoid samples. The Lengua dentition shows a high Mongoloid component with little effects of possible European admixture, thus supporting the theory that despite early Franciscan and Jesuit attempts at missionization, much of the Paraguayan Chaco has remained genetically and culturally relatively intact well into the present century. A finding of note was the apparent sexual dimorphism of the Carabelli cusp, which questions earlier assumptions that no correction for sex need be made in population studies when dealing with this trait. Since mandibular canines show proportionately less wear in the canine distal accessory ridge area than maxillary canines, the value of the incidence of this trait in population and microevolutionary studies is questioned.     

The British dental arch

Thirty-two dimensions of the maxillary and mandibular dental arches were measured on 320 adult skulls derived from Anglo-saxon to modern times. Multivariate analysis showed varying patterns of contrast between the samples, depending upon which arch dimensions were considered. The results suggest that dental arch changes occur independently of jaw changes.     

Dental amalgam and mercury

Summary Mercury concentration in intraoral air and urine of seven females with dental amalgam was measured before and after intake of one hard-boiled egg. A considerable decrease in mercury concentration in intraoral air was found. Twenty women with about equal dental amalgam status, with or without subjective symptoms related to dental amalgam, were also studied. Mercury concentrations in intraoral air and urine were measured. For all the 27 women the basal intraoral air concentration of mercury ranged over 0.6–10.4 g/m³ (median value 4.3 g/m³). This corresponds to a release of 0.02–0.38 ng/s (median value 0.16 ng/s). In urine, the mercury concentration varied from < 0.8–6.9 g/g creatinine (median value 1.9 g/g creatinine). Data from both parameters were significantly correlated to the total number of teeth areas with dental amalgam. Protein values in urine indicated no renal damage. Maximum concentrations of mercury vapour in intraoral air for the 27 women who had chewed chewing gum for 5 min varied between 2–60 g Hg/m³ (median value 19 g Hg/m³). This corresponds to 0.07–2.20 ng Hg/s and a median value of 0.70 ng Hg/s.     

Dental morphology and odontometry of the Tibetan immigrants

Dental features such as size, shape, cusp number and groove pattern, deflecting wrinkle, protostylid, form and size of dental arch and occlusion pattern, as well as crown diameters of maxillary and mandibular dentition of the Tibetan immigrants in India are described. Sex differences in various measurements are also noted. Overall reduction in size, presence of hypodontia of the third molar, and absence of Carabelli's trait are a distinct progressive/evolutionary trend in the Tibetan dentition, while presence of a shovel-shaped lingual surface of central and lateral incisors is a retrogressive/primitive condition. In some of the dental features Tibetans resemble Caucasoid and modern populations, in certain others they resemble other Mongoloid populations, and in still other features they resemble aboriginal populations and fossil hominids.     

Dental wear,wear rate,and dental disease in the African apes

The African apes possess thinner enamel than do other hominoids, and a certain amount of dentin exposure may be advantageous in the processing of tough diets eaten by Gorilla. Dental wear (attrition plus abrasion) that erodes the enamel exposes the underlying dentin and creates additional cutting edges at the dentin‐enamel junction. Hypothetically, efficiency of food processing increases with junction formation until an optimal amount is reached, but excessive wear hinders efficient food processing and may lead to sickness, reduced fecundity, and death. Occlusal surfaces of molars and incisors in three populations each of Gorilla and Pan were videotaped and digitized. The quantity of incisal and molar occlusal dental wear and the lengths of dentin–enamel junctions were measured in 220 adult and 31 juvenile gorilla and chimpanzee skulls. Rates of dental wear were calculated in juveniles by scoring the degree of wear between adjacent molars M1 and M2. Differences were compared by principal (major) axis analysis. ANOVAs compared means of wear amounts. Pearson correlation coefficients were calculated to compare the relationship between molar wear and incidence of dental disease. Results indicate that quantities of wear are significantly greater in permanent incisors and molars and juvenile molars of gorillas compared to chimpanzees. The lengths of dentin–enamel junctions were predominantly suboptimal. Western lowland gorillas have the highest quantities of wear and the most molars with suboptimal wear. The highest rates of wear are seen in Pan paniscus and Pan t. troglodytes, and the lowest rates are found in P.t. schweinfurthii and G. g. graueri. Among gorillas, G. b. beringei have the highest rates but low amounts of wear. Coefficients between wear and dental disease were low, but significant when all teeth were combined. Gorilla teeth are durable, and wear does not lead to mechanical senescence in this sample. Am. J. Primatol. 72:481–491, 2010. © 2010 Wiley‐Liss, Inc.