Effects of bfp mutations on biogenesis of functional enteropathogenic Escherichia coli type IV pili

Enteropathogenic Escherichia coli expresses a type IV fimbria known as the bundle-forming pilus (BFP) that is required for autoaggregation and localized adherence (LA) to host cells. A cluster of 14 genes is sufficient to reconstitute BFP biogenesis in a laboratory strain of E. coli. We have undertaken a systematic mutagenesis of the individual genes to determine the effect of each mutation on BFP biogenesis and LA. Here we report the construction and analysis of nonpolar mutations in six genes of the bfp cluster, bfpG, bfpB, bfpC, bfpD, bfpP, and bfpH, as well as the further analysis of a previously described bfpA mutant strain that is unable to express bundlin, the pilin protein. We found that mutations in bfpB, which encodes an outer membrane protein; bfpD, which encodes a putative nucleotide-binding protein; and bfpG and bfpC, which do not have sequence homologues in other type IV pilus systems, do not affect prebundlin expression or processing but block both BFP biogenesis and LA. The mutation in bfpP, the prepilin peptidase gene, does not affect prebundlin expression but blocks signal sequence cleavage of prebundlin, BFP biogenesis, and LA. The mutation in bfpH, which is predicted to encode a lytic transglycosylase, has no effect on prebundlin expression, prebundlin processing, BFP biogenesis, or LA. For each mutant for which altered phenotypes were detected, complementation with a plasmid containing the corresponding wild-type allele restored the wild-type phenotypes. We also found that association of prebundlin or bundlin with sucrose density flotation gradient fractions containing both inner and outer membrane proteins does not require any accessory proteins. These studies indicate that many bfp gene products are required for biogenesis of functional type IV pili but that mutations in the individual genes do not lead to the identification of new phases of pilus assembly.     

A homologue of the Escherichia coli DsbA protein involved in disulphide bond formation is required for enterotoxin biogenesis in Vibrio cholerae

A strain of Vibrio cholerae, which had been engineered to express high levels of the non-toxic B subunit (EtxB) of Escherichia coli heat-labile enterotoxin, was subjected to transposon (TnphoA) mutagenesis. Two chromosomal TnphoA insertion mutations of the strain were isolated that showed a severe defect in the amount of EtxB produced. The loci disrupted by TnphoA in the two mutant derivatives were cloned and sequenced, and this revealed that the transposon had inserted at different sites in the same gene. The open reading frame of the gene predicts a 200-amino-acid exported protein, with a Cys-X-X-Cys motif characteristic of thioredoxin, protein disulphide isomerase, and DsbA (a periplasmic protein required for disulphide bond formation in E. coli). The V. cholerae protein exhibited 40% identity with the DsbA protein of E. coli, including 90% identity in the region of the active-site motif. Introduction of a plasmid encoding E. coli DsbA into the V. cholerae TnphoA derivatives was found to restore enterotoxin formation, whilst expression of Etx or EtxB in a dsbA mutant of E. coli confirmed that DsbA is required for enterotoxin formation in E. coli. These results suggest that, since each EtxB subunit contains a single intramolecular disulphide bond, a transient intermolecular interaction with DsbA occurs during toxin subunit folding which catalyses formation of the disulphide in vivo.     

Disulfide bond formation in secreton component PulK provides a possible explanation for the role of DsbA in pullulanase secretion

When expressed in Escherichia coli, the 15 Klebsiella oxytoca pul genes that encode the so-called Pul secreton or type II secretion machinery promote pullulanase secretion and the assembly of one of the secreton components, PulG, into pili. Besides these pul genes, efficient pullulanase secretion also requires the host dsbA gene, encoding a periplasmic disulfide oxidoreductase, independently of disulfide bond formation in pullulanase itself. Two secreton components, the secretin pilot protein PulS and the minor pseudopilin PulK, were each shown to posses an intramolecular disulfide bond whose formation was catalyzed by DsbA. PulS was apparently destabilized by the absence of its disulfide bond, whereas PulK stability was not dramatically affected either by a dsbA mutation or by the removal of one of its cysteines. The pullulanase secretion defect in a dsbA mutant was rectified by overproduction of PulK, indicating reduced disulfide bond formation in PulK as the major cause of the secretion defect under the conditions tested (in which PulS is probably present in considerable excess of requirements). PulG pilus formation was independent of DsbA, probably because PulK is not needed for piliation.     

BfpB, an outer membrane lipoprotein required for the biogenesis of bundle-forming pili in enteropathogenic Escherichia coli.

The bundle-forming pili (BFP) of enteropathogenic Escherichia coli are believed to play a role in pathogenesis by causing the formation of bacterial microcolonies that bind epithelial surfaces of the small intestine. This in vivo process is mimicked in vitro by the autoaggregation and localized adherence phenotypes. Expression of BFP, a member of the type IV pilus family, requires the enteroadherence factor (EAF) plasmid, which contains bfpA, the gene that encodes the principal structural subunit of BFP. Immediately downstream of bfpA are 13 open reading frames transcribed in the same direction as bfpA; together with bfpA, these compose the bfp gene cluster. Disruption of bfpB, the second open reading frame downstream of bfpA, was performed by allelic exchange. The resulting mutant, B171-8deltaB, did not exhibit the autoaggregation or localized adherence phenotype or produce BFP filaments. Thus, BfpB is required for pilus biogenesis. However, BfpA was produced at wild-type levels and processed normally by B171-8deltaB, indicating that BfpB acts at a step in the BFP biogenic pathway after production and processing of the structural subunit. Biochemical and cell fractionation studies showed that BfpB is a 58-kDa lipoprotein that is located primarily in the outer membrane. Assays of bfpA and bfpB mRNAs and protein expression showed that both genes are cotranscribed as part of an environmentally responsive operon that is regulated by growth phase and ammonium.     

A plasmid-encoded type IV fimbrial gene of enteropathogenic Escherichia coli associated with localized adherence

Enteropathogenic Escherichia coli (EPEC) form adherent microcolonies on the surface of tissue culture cells in a pattern termed localized adherence. Localized adherence requires the presence of a large EPEC adherence factor (EAF) plasmid. Recently a bundle-forming pilus has been described in EPEC possessing the EAF plasmid. An analysis of 22 non-invasive EPEC TnphoA mutants revealed that seven have insertions in the EAF plasmid and are incapable of localized adherence. We report here the mapping of the TnphoA insertions in these mutants. The nucleotide sequence of the gene interrupted in these TnphoA mutants (bfpA) was determined and found to correspond to the N-terminal amino acid sequence of the major structural protein of the bundle-forming pilus. The bfpA gene bears sequence similarities to members of the type IV fimbrial gene family and encodes a potential site for processing by a prepilin peptidase. A plasmid containing bfpA as the only open reading frame directs the synthesis of a protein recognized by antiserum raised against the bundle-forming pilus. TnphoA mutants at this locus are unable to synthesize BfpA, but synthesis is restored by introduction of a plasmid containing the cloned gene. The minimum fragment of DNA required to restore localized adherence is considerably greater than that required to restore BfpA synthesis. BfpA expression, as assessed by alkaline phosphatase activity in bfpA::TnphoA mutants, is affected by temperature and growth medium. These studies describe an EPEC plasmid-encoded fimbrial gene, a candidate for the elusive EPEC adherence factor responsible for localized adherence.     

Overexpression of the rhodanese PspE, a single cysteine-containing protein, restores disulphide bond formation to an Escherichia coli strain lacking DsbA

Escherichia coli uses the DsbA/DsbB system for introducing disulphide bonds into proteins in the cell envelope. Deleting either dsbA or dsbB or both reduces disulphide bond formation but does not entirely eliminate it. Whether such background disulphide bond forming activity is enzyme-catalysed is not known. To identify possible cellular factors that might contribute to the background activity, we studied the effects of overexpressing endogenous proteins on disulphide bond formation in the periplasm. We find that overexpressing PspE, a periplasmic rhodanese, partially restores substantial disulphide bond formation to a dsbA strain. This activity depends on DsbC, the bacterial disulphide bond isomerase, but not on DsbB. We show that overexpressed PspE is oxidized to the sulphenic acid form and reacts with substrate proteins to form mixed disulphide adducts. DsbC either prevents the formation of these mixed disulphides or resolves these adducts subsequently. In the process, DsbC itself gets oxidized and proceeds to catalyse disulphide bond formation. Although this PspE/DsbC system is not responsible for the background disulphide bond forming activity, we suggest that it might be utilized in other organisms lacking the DsbA/DsbB system.     

A plasmid-encoded prepilin peptidase gene from enteropathogenic Escherichia coli.

Enteropathogenic Escherichia coli, a leading agent of infantile diarrhea worldwide, adheres to tissue culture cells in a pattern called "localized adherence." Localized adherence is associated with bundle-forming pili encoded by the plasmid bfpA gene, the product of which is homologous with the major structural subunit proteins of type IV fimbriae in other bacteria. Several of these proteins have been shown to be processed from a precursor by a specific prepilin peptidase. We cloned restriction fragments downstream of the bfpA gene into an E. coli-Pseudomonas aeruginosa shuttle vector and mobilized them into a P. aeruginosa prepilin peptidase (pilD) mutant. A plasmid containing a 1.3-kb PstI-BamHI fragment was able to complement the pilD mutation, as demonstrated by restoration of sensitivity to the pilus-specific bacteriophage PO4. The DNA sequence of this fragment revealed an open reading frame, designated bfpP, the predicted product of which is homologous to other prepilin peptidases, including TcpJ of Vibrio cholerae (30% identical amino acids), PulO of Klebsiella oxytoca (29%), and PilD of P. aeruginosa (28%). A bfpA::TnphoA mutant complemented with a bfpA-containing DNA fragment only partially processes the BfpA protein. When complemented with a larger fragment containing bfpP as well as bfpA, the mutant expresses the fully processed BfpA protein. P. aeruginosa PAK, but not a pilD mutant of PAK, expresses mature BfpA protein when the bfpA gene is mobilized into this strain. Thus, as in other type IV fimbria systems, enteropathogenic E. coli utilizes a specific prepilin peptidase to process the major subunit of the bundle-forming pilus. This prepilin petidase contains sequence and reciprocal functional homologies with the PilD protein of P. aeruginosa.     

A cluster of fourteen genes from enteropathogenic Escherichia coli is sufficient for the biogenesis of a type IV pilus

Enteropathogenic Escherichia coli (EPEC) adhere to epithelial cells in microcolonies, a pattern termed localized adherence (LA). LA is dependent upon the presence of 50–70MDa plasmids, termed EPEC adherence factor (EAF) plasmids. Expression of an EAF plasm id-encoded type IV fimbria, the bundle-forming pilus (BFP), is associated with the LA phenotype. TnphoA insertions in bfpA, the gene encoding the major structural subunit of the BFP, abolish LA. While bfpA::TnphoA mutants cannot be complemented for LA by plasmids carrying the bfpA gene alone in trans, this work shows that they can be complemented by plasmids carrying the bfpA gene, as well as approximately 10kb of downstream sequence, suggesting that such mutations have polar effects on downstream genes. The identification and characterization of a cluster of 13 genes immediately downstream of bfpA are described. The introduction into a laboratory Escherichia coli strain of a plasmid containing these 14 bfp gene cluster genes, along with pJPN14, a plasmid containing another fragment derived from the EAF plasmid, confers LA ability and BFP biogenesis. However, when a mutation is introduced into the last gene of the bfp cluster, neither LA nor BFP biogenesis is conferred. This work also provides evidence to show that the fragment cloned in pJPN14 encodes a factor(s) which results in increased levels of the pilin protein. Finally, it is shown that expression of the 14 genes in the bfp cluster from an IPTG-inducible promoter, in the absence of pJPN14, is sufficient to reconstitute BFP biogenesis in a laboratory E. cob strain, but is insufficient for LA. This is the first report demonstrating the reconstitution of a type IV pilus in a laboratory E. coli strain with a defined set of genes. The 8FP system should prove to be a useful model for studying the molecular mechanisms of type IV pilus biogenesis.     

DsbA2 (27 kDa Com1-like protein) of Legionella pneumophila catalyses extracytoplasmic disulphide-bond formation in proteins including the Dot/Icm type IV secretion system

In Gram-negative bacteria, thiol oxidoreductases catalyse the formation of disulphide bonds (DSB) in extracytoplasmic proteins. In this study, we sought to identify DSB-forming proteins required for assembly of macromolecular structures in Legionella pneumophila. Here we describe two DSB-forming proteins, one annotated as dsbA1 and the other annotated as a 27 kDa outer membrane protein similar to Com1 of Coxiella burnetii, which we designate as dsbA2. Both proteins are predicted to be periplasmic, and while dsbA1 mutants were readily isolated and without phenotype, dsbA2 mutants were not obtained. To advance studies of DsbA2, a cis-proline residue at position 198 was replaced with threonine that enables formation of stable disulphide-bond complexes with substrate proteins. Expression of DsbA2 P198T mutant protein from an inducible promoter produced dominant-negative effects on DsbA2 function that resulted in loss of infectivity for amoeba and HeLa cells and loss of Dot/Icm T4SS-mediated contact haemolysis of erythrocytes. Analysis of captured DsbA2 P198T-substrate complexes from L. pneumophila by mass spectrometry identified periplasmic and outer membrane proteins that included components of the Dot/Icm T4SS. More broadly, our studies establish a DSB oxidoreductase function for the Com1 lineage of DsbA2-like proteins which appear to be conserved among those bacteria also expressing T4SS.     

The disulphide isomerase DsbC cooperates with the oxidase DsbA in a DsbD-independent manner

In Escherichia coli, DsbA introduces disulphide bonds into secreted proteins. DsbA is recycled by DsbB, which generates disulphides from quinone reduction. DsbA is not known to have any proofreading activity and can form incorrect disulphides in proteins with multiple cysteines. These incorrect disulphides are thought to be corrected by a protein disulphide isomerase, DsbC, which is kept in the reduced and active configuration by DsbD. The DsbC/DsbD isomerization pathway is considered to be isolated from the DsbA/DsbB pathway. We show that the DsbC and DsbA pathways are more intimately connected than previously thought. dsbA(-)dsbC(-) mutants have a number of phenotypes not exhibited by either dsbA(-), dsbC(-) or dsbA(-)dsbD(-) mutations: they exhibit an increased permeability of the outer membrane, are resistant to the lambdoid phage Phi80, and are unable to assemble the maltoporin LamB. Using differential two-dimensional liquid chromatographic tandem mass spectrometry/mass spectrometry analysis, we estimated the abundance of about 130 secreted proteins in various dsb(-) strains. dsbA(-)dsbC(-) mutants exhibit unique changes at the protein level that are not exhibited by dsbA(-)dsbD(-) mutants. Our data indicate that DsbC can assist DsbA in a DsbD-independent manner to oxidatively fold envelope proteins. The view that DsbC's function is limited to the disulphide isomerization pathway should therefore be reinterpreted.     

Function of the usher N-terminus in catalysing pilus assembly

The chaperone/usher (CU) pathway is a conserved bacterial secretion system that assembles adhesive fibres termed pili or fimbriae. Pilus biogenesis by the CU pathway requires a periplasmic chaperone and an outer membrane (OM) assembly platform termed the usher. The usher catalyses formation of subunit-subunit interactions to promote polymerization of the pilus fibre and provides the channel for fibre secretion. The mechanism by which the usher catalyses pilus assembly is not known. Using the P and type 1 pilus systems of uropathogenic Escherichia coli, we show that a conserved N-terminal disulphide region of the PapC and FimD ushers, as well as residue F4 of FimD, are required for the catalytic activity of the ushers. PapC disulphide loop mutants were able to bind PapDG chaperone-subunit complexes, but did not assemble PapG into pilus fibres. FimD disulphide loop and F4 mutants were able to bind chaperone-subunit complexes and initiate assembly of pilus fibres, but were defective for extending the pilus fibres, as measured using in vivo co-purification and in vitro pilus polymerization assays. These results suggest that the catalytic activity of PapC is required to initiate pilus biogenesis, whereas the catalytic activity of FimD is required for extension of the pilus fibre.     

Novel Topology of BfpE, a Cytoplasmic Membrane Protein Required for Type IV Fimbrial Biogenesis in Enteropathogenic Escherichia coli

Enteropathogenic Escherichia coli (EPEC) produces the bundle-forming pilus (BFP), a type IV fimbria that has been implicated in virulence, autoaggregation, and localized adherence to epithelial cells. The bfpE gene is one of a cluster of bfp genes previously shown to encode functions that direct BFP biosynthesis. Here, we show that an EPEC strain carrying a nonpolar mutation in bfpE fails to autoaggregate, adhere to HEp-2 cells, or form BFP, thereby demonstrating that BfpE is required for BFP biogenesis. BfpE is a cytoplasmic membrane protein of the GspF family. To determine the membrane topology of BfpE, we fused bfpE derivatives containing 3' truncations and/or internal deletions to alkaline phosphatase and/or beta-galactosidase reporter genes, whose products are active only when localized to the periplasm or cytoplasm, respectively. In addition, we constructed BfpE sandwich fusions using a dual alkaline phosphatase/beta-galactosidase reporter cassette and analyzed BfpE deletion derivatives by sucrose density flotation gradient fractionation. The data from these analyses support a topology in which BfpE contains four hydrophobic transmembrane (TM) segments, a large cytoplasmic segment at its N terminus, and a large periplasmic segment near its C terminus. This topology is dramatically different from that of OutF, another member of the GspF family, which has three TM segments and is predominantly cytoplasmic. These findings provide a structural basis for predicting protein-protein interactions required for assembly of the BFP biogenesis machinery.     

A mutation in either dsbA or dsbB, a gene encoding a component of a periplasmic disulfide bond-catalyzing system, is required for high-level expression of the Bacteroides fragilis metallo-beta-lactamase, CcrA, in Escherichia coli.

The metallo-beta-lactamase gene, ccrA, from Bacteroides fragilis is functionally expressed in Escherichia coli only in the presence of a genomic mutation in iarA or iarB (increased ampicillin resistance), identified in this study as dsbA or dsbB, respectively. DsbA and DsbB are components of a periplasmic protein disulfide bond-catalyzing system. Data indicated that DsbA interacted with CcrA, creating aberrant disulfide bond linkages that render CcrA proteolytically unstable. Mutations in dsbA or dsbB permissive for CcrA expression eliminated or greatly reduced DsbA activity, allowing CcrA to assume a disulfide bond-free and proteolytically stable conformation.     

Identification of a protein required for disulfide bond formation in vivo

We describe a mutation (dsbA) that renders Escherichia coli severely defective in disulfide bond formation. In dsbA mutant cells, pulse-labeled beta-lactamase, alkaline phosphatase, and OmpA are secreted but largely lack disulfide bonds. These disulfideless proteins may represent in vivo folding intermediates, since they are protease sensitive and chase slowly into stable oxidized forms. The dsbA gene codes for a 21,000 Mr periplasmic protein containing the sequence cys-pro-his-cys, which resembles the active sites of certain disulfide oxidoreductases. The purified DsbA protein is capable of reducing the disulfide bonds of insulin, an activity that it shares with these disulfide oxidoreductases. Our results suggest that disulfide bond formation is facilitated by DsbA in vivo.     

Insights into type IV pilus biogenesis and dynamics from genetic analysis of a C-terminally tagged pilin: a role for O-linked glycosylation

Type IV pili are surface organelles essential for pathogenicity of many Gram-negative bacteria. In Neisseria gonorrhoeae, the major subunit of type IV pili, PilE, is a target of its general O-linked glycosylation system. This system modifies a diverse set of periplasmic and extracellular gonococcal proteins with a variable set of glycans. Here we show that expression of a particular hexa-histidine-tagged PilE was associated with growth arrest. By studying intra- and extragenic suppressors, we found that this phenotype was dependent on pilus assembly and retraction. Based on these results, we developed a sensitive tool to identify factors with subtle effects on pilus dynamics. Using this approach, we found that glycan chain length has differential effects on the growth arrest that appears to be mediated at the level of pilin subunit-subunit interactions and bidirectional remodelling of pilin between its membrane-associated and assembled states. Gonococcal pilin glycosylation thus plays both an intracellular role in pilus dynamics and potential extracellular roles mediated through type IV pili. In addition to demonstrating the effect of glycosylation on pilus dynamics, the study provides a new way of identifying factors with less dramatic effects on processes involved in type IV pilus biogenesis.     

Characterization of DsbC, a periplasmic protein of Erwinia chrysanthemi and Escherichia coli with disulfide isomerase activity.

We identified and characterized an Erwinia chrysanthemi gene able to complement an Escherichia coli dsbA mutation that prevents disulfide bond formation in periplasmic proteins. This gene, dsbC, codes for a 24 kDa periplasmic protein that contains a characteristic active site sequence of disulfide isomerases, Phe-X-X-X-X-Cys-X-X-Cys. Besides the active site, DsbC has no homology with DsbA, thioredoxin or eukaryotic protein disulfide isomerase and it could define a new subfamily of disulfide isomerases. Purified DsbC protein is able to catalyse insulin oxidation in a dithiothreitol dependent manner. The E.coli gene xprA codes for a protein functionally equivalent to DsbC. The in vivo function of DsbC seems to be the formation of disulfide bonds in proteins. The presence of XprA could explain the residual disulfide isomerase activity existing in dsbA mutants. Re-oxidation of XprA does not seem to occur through DsbB, the protein that probably re-oxidizes DsbA.     

Isolation and characterization of a chromosomally encoded disulphide oxidoreductase from Salmonella enterica serovar Typhimurium

In this study, the chromosomally encoded disulphide oxidoreductase dsbA from Salmonella typhimurium was cloned and characterized. A survey of a number of serovars of Salmonella subspecies I showed that dsbA is highly conserved in most, but not all members of this subclass of Salmonella species. Using motility, beta-galactosidase, and alkaline phosphatase assays as indirect indicators of disulphide oxidoreductase activity, we demonstrated that DsbA from S. typhimurium LT2 can only partially complement an Escherichia coli dsbA-null strain. This is surprising considering the high degree of conservation between these two DsbA proteins (87% amino acid identity). To determine the contribution of DsbA to the proper folding and assembly of proteins of S. typhimurium, deletion mutants were created in the avirulent strain LT2 and in the virulent strain SL1344. These null alleles were constructed by partial deletion of the dsbA-coding region and then insertion of an antibiotic resistance marker in the gene. Mutants no longer expressing a functional disulphide oxidoreductase exhibit pleitropic effects, including an increase in colony mucoidy, a dramatic decrease in motility, and an increased susceptibility to the cationic peptide protamine sulphate. The disruption of disulphide bond formation was also shown to specifically affect the stability of several proteins secreted into the extracellular environment.     

Recognition of the N-terminal lectin domain of FimH adhesin by the usher FimD is required for type 1 pilus biogenesis

In this work we discover that a specific recognition of the N-terminal lectin domain of FimH adhesin by the usher FimD is essential for the biogenesis of type 1 pili in Escherichia coli. These filamentous organelles are assembled by the chaperone-usher pathway, in which binary complexes between fimbrial subunits and the periplasmic chaperone FimC are recognized by the outer membrane protein FimD (the usher). FimH adhesin initiates fimbriae polymerization and is the first subunit incorporated in the filament. Accordingly, FimD shows higher affinity for the FimC/FimH complex although the structural basis of this specificity is unknown. We have analysed the assembly into fimbria, and the interaction with FimD in vivo, of FimH variants in which the N-terminal lectin domain of FimH was deleted or substituted by different immunoglobulin (Ig) domains, or in which these Ig domains were fused to the N-terminus of full-length FimH. From these data, along with the analysis of a FimH mutant with a single amino acid change (G16D) in the N-terminal lectin domain, we conclude that the lectin domain of FimH is recognized by FimD usher as an essential step for type 1 pilus biogenesis.